[Q] Brick(death) before gingerbread,now in assisted coma - Galaxy Tab Q&A, Help & Troubleshooting

Hello,
guys i need your help...one week ago my european unbranded tab suddlenty died after repartitioned with wrong pit and flash with jmk (only download mode and samsung logo) Now,i try the new gingerbread with bootloaders, odin done his job,now i have is coming into recovery but new things come up....
E:Error in/cache/recovery/sec_cscs.zip (status 7) Instalation aborded (this after odin finish and restart)...
I put in recovery and is coming E:cant open directory/system/app/ (no such file or directory) copy applications failed
wipe cache- E:format_volume:rfs format failed on/dev/block/stl11
cache wipe complete
wipe date- the same as above but /mncblkop2
/stl10
/stl11
Do you thing we can revive this device?
Sorry for my english and thank you for speding time to reading this

It looks like you have a signed bootloader.
I could revive my tab as followed:
Go to http://www.samfirmware.com/ download the JJ4 firmware, flash that firmware, including rom, modem & CSC with partition on.
Your Tab will probably come to life then.
Then you can upgrade from there on, if you like.
I hope this will work for you too.

have the same problem (P1000, neverlocked)
JJ4 is one i didnt try ... would have a look, hope it would work
tried until now
P1000XWJMI
P1000XWJMK
P1000XXJHA
P1000XXJI2
P1000XXJI4
P1000XXJK5
P1000XXJMA
P1000XXJME
but no one of these helped. Some only let me use the DL mode, others would reactivate the soft buttons, but no chance for get a Android boot :/
pong

dap,jj4 not working i mean odin succes but no bootloding or recovery

Frantech.
Just follow what rwa66 said, I had exacly the same issue and he helped me getting my tab up and running:
1- Download and flash JJ4
Your tab might be still stuck on the boot logo. Just turn it off, then go to download.
2 Flash GB 2.3.3 (following Chainfire instructions ) and your tab will boot normally.
Sent from my GT-P1000 using XDA Premium App

Pong0820,
JJ4 is a full ROM it should resolve the csc errors. Even if your tab doesn't boot or gets stuck on boot, flash again GB 2.3.3
Good luck
Sent from my GT-P1000 using XDA Premium App

doing now,thanks tupo05

frantech said:
doing now,thanks tupo05
Click to expand...
Click to collapse
Good luck. I hope your tab will be up and running again.
Sent from my GT-P1000 using XDA Premium App

incredible!!!!!!!!!! my tab is back!!!!!! with ginger,f..k!!!
the trick,i believe,is after odin is finish to flash ginger is to to put direcly in download mode (without loading) to flash adbdata.....thank you tupo5 and to all wonderful team

frantech said:
incredible!!!!!!!!!! my tab is back!!!!!! with ginger,f..k!!!
the trick,i believe,is after odin is finish to flash ginger is to to put direcly in download mode (without loading) to flash adbdata.....thank you tupo5 and to all wonderful team
Click to expand...
Click to collapse
Congrats man. Welcome back lol
Sent from my GT-P1000 using XDA Premium App

youre really incredible ... nothing else to add. feel squeezed and kissed
pong

Good to hear Pong. Enjoy your GB 2.3.3
Sent from my GT-P1000 using XDA Premium App

i have same error..
i have a samsung galaxy tab verizon cdma. sch-i800.
but in 99% stop in MOVINAND... not show error...
i have disconnect manualy. and show this error...
help me please !

man,really i dont know much about verizon,t-mobil,i have european tab...but about movinant failed because you use wrong pit with that rom you flash(maybe i am wrong but it happend to me)

I'm in a similar situation. Battery ran out during Odin process. Now it won't acknowledge the Tab when plugged in. I've put it on charge but still nothing. Is there any way I can solve this?

leave odin on,your tab conected and wait for odin to find yout tab(minutes,hours)
try first with wall charger few hours.....and then follow instructions on this topic or whatever you want to do

thanks frantech.
The issue is that my screen is completely blank. Can't get it even in to download mode. No combination of buttons does anything and connecting it to the computer doesn't even trigger that a usb device has been connected.
Is the only option to just leave it there with Odin?

IT IS WORKED!!! How AMAZING it is!!
OMG DUDE IT IS REALLY WORKED!!!
I got almost same bricked situation of my SGT!!!
Once i really think my GT have to send back to samsung...... but i have the last try of you guys' suggestion, IT IS WORKED!!!
IT IS SO AMAZING N UNBELIEVABLE!!!
Thanks alot dude!!! You save my SGT!!! n my pocket!!! Thanks~
Now my SGT has reborn from deadly bricked!!
Every1 got such problem can try this solution~

Related

[HELP] SPH-P100 Sprint Galaxy Tab - bricked?

Posting for a friend -
I have a SPH-P100 Sprint Galaxy Tab and I have been stuck @ the Samsung logo for a few days now. It seems to boot as normal (samsung animation and chime) then pulses the samsung logo for a while then eventually the pulsing just stops and sticks. I have flashed to every Sprint rom and kernel available and still no luck -_- but what I do know is that when I enter adb logcat while it is booting it shows all the apps i had on the stock ROM trying to start or install. I'm not sure how but all the games and apps are still there on the internal sd/nand or whatever it is called. All the 3rd party stuff i bought etc, please help my tab is stuck -_-.
I have the same Problem and my sprint tab stuck at the Samsung logo
what should i do ????
please help me .
So you can still get into download
mode? If so check the zypher Rom thread. It has the stock tab Rom without modem
Sent from my PC36100 using Tapatalk
We've tried zypher.. including the one w/o modem.
it is still not working
Not working
it is as dead as a nail (i am the friend btw) when it is booting in logcat i can see all my old apps which i think is stopping me from booting. i also get a Mismatch UID error.
it is still not working
Did u tick the repartition box?
Sent from my GT-P1000 using XDA App
quattr0 said:
Did u tick the repartition box?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
some roms I tick and some I did not tick
i have same problem
i try many roms
i think the device is dead
is there are any original rom for sph p-100 ?
Use ROM EA24
I have same problems, and i flashed some Roms from internet, but not luck, until i found Rom EA24 in this forums. Use this, and my galaxy likes new one.
Use the ea24 update and flash with Odin in download mode. Look in Dev section for link.
Sent from my SPH-P100 using XDA Premium App
Have tried flashing ea24 but still stuck on samsung logo...
Already 3 days cannot properly sleep...
Please help.... Any body have any other solution???
Search for the no modem DJ30 file in here. That's important. Flash it with ODIN in the PDA section. Do not flash anything else. That should fix any issues you have, I hope.
Here's the link http://www.multiupload.com/WDKOUJSM2G download that. No need to repartition, so make sure it's unchecked.
You can also try to get to the recovery either vol up or vol down + power and format the device.
Sent from my SPH-P100 using Tapatalk
shoman24v said:
Search for the no modem DJ30 file in here. That's important. Flash it with ODIN in the PDA section. Do not flash anything else. That should fix any issues you have, I hope.
Here's the link http://www.multiupload.com/WDKOUJSM2G download that. No need to repartition, so make sure it's unchecked.
You can also try to get to the recovery either vol up or vol down + power and format the device.
Sent from my SPH-P100 using Tapatalk
Click to expand...
Click to collapse
THANK YOU!!!. Reminder. the file in the multiupload link is in .rar format. you will need a .rar decompressor to get to it. I after countless hours finaly rooted,flash a clockworkmod recovery and flashed the rom that make my samsung sprint galaxy tab work again!!!!!!!!!!!!!!!!. once again, THANK YOU MUCH!!!!!!!!!!!!!
Help!
shoman24v said:
Search for the no modem DJ30 file in here. That's important. Flash it with ODIN in the PDA section. Do not flash anything else. That should fix any issues you have, I hope.
Here's the link http://www.multiupload.com/WDKOUJSM2G download that. No need to repartition, so make sure it's unchecked.
You can also try to get to the recovery either vol up or vol down + power and format the device.
Sent from my SPH-P100 using Tapatalk
Click to expand...
Click to collapse
Hi there, Is there any way I just can download this file? This link takes me to download the ilivid download (Crap) manager thing, but to no avail.
Any help with the file will be appreciated. Thank you.

help bricked sgs (tried eeverything from various sources)

hi i have a samsung galaxy s i got it given and thought i could follow some guides to unbrick it, it turns on and goes too the samsung galaxy s screen and wont pass it then after a while turns off, if i plug it into comp or charger empty battery with a round thing in the middle comes on and thats about it no movement or anything, i couldnt get into download mode or recovery so i got my self a jig and then could get into download mode folloewed various guides using different rom/firmwares fro tese tutorials and odin says it was successfull but i still cant get past the galaxy screen, but i can now get into download mode now with out the juse of jig but still no luck passing the galaxy s screen, currently got I9000XWJM5 with pit 512. i cant get sdk to work too as my comp wont pick it up so i cant force it into recoery mode this way any help please or am i wastin my time on a proper brick
thanks nick
Hey bud, if you think of the galaxy s as a computer for a sec....you have the BIOS right? It sounds to me that your galaxy s "BIOS" is corrupt. Are you sure your flashing firmware correctly? Pit, PDA, modem/phone, csc, also make sure repartition is ticked too, go back to Froyo XXI9000JPU and let me know if you need help OK?
Sent from my GT-I9000 using XDA Premium App
thanks for tha, i tried I9000XXJPU ## 512.PIT 2.2.1 2010 December from the samfirmware site, i have been using Pit, PDA, modem/phone, csc, and ticked the repartition, it goes throught the motions then the phone resets hanging at the same point as before, and odin says successfull i got no idea now and been trawling through forums for two days . any help please .
nick_gibson said:
thanks for tha, i tried I9000XXJPU ## 512.PIT 2.2.1 2010 December from the samfirmware site, i have been using Pit, PDA, modem/phone, csc, and ticked the repartition, it goes throught the motions then the phone resets hanging at the same point as before, and odin says successfull i got no idea now and been trawling through forums for two days . any help please .
Click to expand...
Click to collapse
Go through the process again, but tick repartition and bootloader update. That should fix it bud
Sent from my GT-I9000 using XDA Premium App
tried it again and still no luck
nick_gibson said:
tried it again and still no luck
Click to expand...
Click to collapse
The best thing I can advise you to do then bud is send it off to Samsung, and blame it on kies, that's what I did and they fixed mine for free under warranty, sorry I couldn't be more help bud
Sent from my GT-I9000 using XDA Premium App
Before you do that try a Darky Odin rom. Some stock roms do not have all the right files (as you do not need them I think with kies and if not re partitioning). Worth a shot. Let us know the results.
also may want to try a wipe and format of the cache and data and db_data partitions from recovery (can you get to recovery?)
Usually you are not hard bricked if you can get to download mode. You may still have a screwed phone with a hardware failure (but not one like any I've seen described) but you're not bricked.
Edit: working on another thread here with a similar situation. Try another version of Odin (like EZ odin) I know I had one that just would not work.
G
thanks fr help but still no good and cnt get into recovery mode
hmmm.. try ezbase it should give u a clean install... http://forum.xda-developers.com/showthread.php?t=991792.. after install wait for atleast 20 mins first boot may take time..
hope it helps!!
still the same thanks 4 help so far

[Q] Help ! My tab p1000 hangs on samsung logo

For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:
You should flash your tab and install a new firmware that's the only solution
omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...
Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App
to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..
Oké gona try it when i get home
Sent from my X10i using XDA App
jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App
thx for all the help. took me couple of hours but got it running again on andriod 2.3.3
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.
Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2
Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
I doubt you will ever get Kies to work with custom ICS rom in your tab.
priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?
who knows Samsung has catch up, then I will be caught out.
kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.

Bricked + Stuck at download screen

Bricked + Stcuk at download screen
Hello guys,
So i created a really messy situation for me. I flashed a lot of ics rom's and was not happy with any of them so was trying to odin back to gb stock rom and flash my old gb custom rom but the odin on pc got stuck at "Getting pit details " and phone was at 1/10 the progress bar..it stuck there for abt 10mins and i decided it's not going anywhere and stuck so i pulled the cable and the phone was hard-bricked. it was not responding to anything. Surprisingly enough in morning i was able to get into download mode but now when i try to flash from odin it get's stuck at "Setup connection" and just stays there. Any Ideas ?
Edit: The phone gets detected in windows and drivers get installed but adb says unknown. or device not found for any commands that i try
Edit #2 :Flashed a Md5 i had and the phone booted into recovery giving all sorts of error E:/data not found and sorts. Not sure what i can do ahead. The odin all in one package get stuck at Setting pit file
See this... Captivate Connection Issues...
And u may need to try a Heimdall One Click if the Odin doesn't work after seeing the thread above.
See here for Odin or Heimdall One Clicks... http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
See this... Captivate Connection Issues...
And u may need to try a Heimdall One Click if the Odin doesn't work after seeing the thread above.
See here for Odin or Heimdall One Clicks... http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Bud thanxx for the reply i just fixed it
had an old package of I9000 lying in the comp...used the pda first to fix the filesystem then used all pit,phone,pda, the last package and the phone took it...now i am back to my custom gb f/w yeah i was considering Heimdall but playing around somewhat with odin worked
Good deal.
Some Captivates do not like the One Clicks, but will accept the flashing of the Firmware through the regular Odin.
Sent from my SAMSUNG-SGH-I777 using xda premium

[Q] Galaxy S3 lte Brick [Repartition]

Hello! S3 Lte (i9305) of my friend is bricked and gave me to solve this problem.. I have never been this stage and I have no idea .. Flashing offical rom with odion is stucked at hidden for so long and reflashed the rom several time but still stuck at Hidden, so I reflashed the offical rom with checking Auto reboot, Nand-erase , and F.Rest.. After checking Nand-erase, rom is flashed successfully but there was no partition .. So I reflash with pit file and repartition but still stuck at Get PIT for mapping.. in flashing .... How i can solve this! Plz help me! I only add PDA and PIT ..
Need other file like CSC,etc (I don't know excatly what are they) This is my 1st experience with bricked Samsung...
Sry for my bad english..
Screen shoot of odion
Before reading, the steps I used is to completely reformat the phone leaving nothing behind.
I have bricked my phone before. What I did is:
1. Download the stock firmware of your phone on sammobile (depends on your country and service provider)
2. Put your phone into download mode (off and on your phone. When it goes to Samsung title screen, press home, off and volume down button at the same time.)
3. Connect your pc to your phone and open odin.
4. Check and see if the message shows pass.
5. Under bootloader, open the md5 file that you downloaded before.
6. Start and wait till it finish.
7. Check your phone and reconfigure as if you have a new phone.
Hope this helps
Thz bro! I already done this step .. my s3 still at bootloop and at recovery still have mount error..
Sent from my GT-I9082 using XDA Premium 4 mobile app
xyp3r said:
Thz bro! I already done this step .. my s3 still at bootloop and at recovery still have mount error..
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
did you do a full wipe?
emmc is fried
SamC95 said:
did you do a full wipe?
Click to expand...
Click to collapse
Yes bro... I full wipe with phliz recovery.. mount error was occur at the starting recovery..
opssemnik said:
emmc is fried
Click to expand...
Click to collapse
How I can solve ?
xyp3r said:
How I can solve ?
Click to expand...
Click to collapse
change emmc chip(nly very skilled people will know how to do so) or change the whole motherboard

Categories

Resources