[Q] Help ! My tab p1000 hangs on samsung logo - Galaxy Tab Q&A, Help & Troubleshooting

For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:

You should flash your tab and install a new firmware that's the only solution

omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?

dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...

Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App

to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..

Oké gona try it when i get home
Sent from my X10i using XDA App

jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App

thx for all the help. took me couple of hours but got it running again on andriod 2.3.3

MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i

Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.

Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.

I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.

copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2

Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance

I doubt you will ever get Kies to work with custom ICS rom in your tab.

priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?

who knows Samsung has catch up, then I will be caught out.

kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.

Related

[Q] Samsung Galaxy Tab blank screen after flash attempt

Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
dai123 said:
Hi,
Please help. I tried flashing the Galaxy Tab with some firmware on samfirmware.com for North America and not sure what happened but now the Tab is completely blank and not responsive. When I connect the USB to the computer, it does recognize that the Tab is connected though. Please let me know what I should do to fix this. Thanks!!
Click to expand...
Click to collapse
Is it possible you flashed the wrong FW? After flashing was the tab able to reboot?
Try wiping cache and do a factory reset. Volume-up+powerbutton. You will see in the middle of the screen a little triangle. Then push the volume-up button again. Then you will be in the recovery-mode. There choose wipe/cache and the wipe-data/factoryreset.
If that not helps try flashing another FW. The Rot-hammer i.e.
Fixed it!
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Question
dai123 said:
Actually, somehow I fixed it now. There was nothing on the display at all. I could see from Odin that it could sometimes try uploading the firmwares. What I think worked was I pressed the Home + Volume Down + Power to try to bring the Tab into download mode and then I pressed Start on Odin immediately to try uploading a different firmware. There was no display on the Tab itself so I was not sure if it was actually in download mode.
Anyway, I'm glad it's working fine now.
Click to expand...
Click to collapse
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
unanony said:
Can you please tell me what firmware you used?
The same thing happened to me, but the problem continues after trying several different firmwares.
Click to expand...
Click to collapse
please tell me what firmware you flashed...please im stuck and depending on what firmware i flash i can hear it start but still blank screen
Same black screen
I can get Odin to recognize my tab, windows 7 can see it and I can flash to it, but the screen is black all the time.
Has anyone had any luck?
What do samsung use to fix this? I've seen a repair/service program from ZTE for some of their devices that I believe was procured from an employee of ZTE. Maybe there is something like that around?
<edit>
I also flashed a rom from samfirmware, so I guess the issue is a locked bootloader from a stock rom. Anyone know how to fix this?
I too am having this issue with sawfiremware image.
i can can tell i am in download mode but i am unable to flash the EA24 firmware.
Anything that can be done?
Thank you!!
My Tab's screen won't turn on at all, even when plug-in, even that Odin said that flash was successful. But after connecting it to PC with Odin opened (Odin recognized it), loaded all files needed for flash in Odin, I pressed HOME+Volume Down + Power, the device auto-dismounted from PC, and reconnected again, I pressed start in Odin and after finishing updating firmware, the screen was working again.
Good luck to everybody! I'm happy now
what firmware did you use? thx
HELP
hello guys i have the same problem can you please help me out on how to fix it?? my screen is black and i only have the 4 white buttons up, please i need some serious assistence
Blank Screen after installing firmware same firmware
hey guys, could you lend me some help here , my tablet is samsung galaxy tab 7.0 Plus , i installed android 4.12 jelly bean , but it was 3.2 honeycomb before i upgraded to 4.12 jelly bean ,well , i'm proud of it , its smoother then the honeycomb but after a few months , my tablet suddenly just displaying a samsung logo for .... forever .. i downloaded the firmware from samsungupdate.com and i probably understand it's because the rom , i flashed the rom using Odin 3,07 with 4.12 jelly bean firmware that for indonesia region , here's the version of the firmware that i flashed to my tablet "P6200XXMD6_P6200OLBMD5_P6200XXMC3_HOME.TAR.MD5 " please note that my tablet can't open/show the recovery system , it just went black when i went to recovery system , soo i just flashed the rom again , it's because the tablet just showing samsung logo forever , never goes to window , and i flashed the rom with similar firmware but not for the indonesia region , the international one , andd after i flashed , it successfully install the same firmware ( 4.12 jelly bean ) well , it's fix the frozen samsung logo , but after it's showed the samsung logo , it just showed a blank screen of dead , the installazation is success but not fixed my tablet , well i still cant open the recovery mode, it's just showed a blank screen just like before i flashed the same firmware , PLEASE help
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
priyana said:
Your forum
http://forum.xda-developers.com/galaxy-tab-plus
Sent from my GT-N7100 using XDA Free mobile app
Click to expand...
Click to collapse
wut ?? isn't this the galaxy tab forum ... it thought i can ask a question here , but thanx anyway
Yeah. Galaxy Tab. You know, the 7" original. GT-P1000. Not at galaxy tab.
Sent from my GT-N7100 using XDA Free mobile app
Hello Everyone, I'm from Nepal. I have also same problem after few days. I search in google and YouTube also but not solve my problem. then i use my technical ideas on SM T561 tab, and I'm Shocked its open and working properly. if you also want to do that plz download Miracle Thunder 2.82 and Odin. install Miracle thunder and open, connect your Samsung tab with pc or laptop, on Miracle Thunder choose Samsung button, scan you Samsung port, model> Auto detect, mode > download, then select factory reset and click Go and wait. now your tab download mode then go to Odin and flashing your Samsung tab original firmware from website and flashing your tab. 100% its work. Thank you and sorry for my poor English.
https://www.facebook.com/softktm

[Q] Rooting galaxy s with gingerbread 2.3.3

I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Uh... sounds like something is seriously wrong with your phone dude =\ You should be able to get to d/l mode regardless. Does the phone still work fine otherwise?
Unable to root sgs gingerbread NEJVD
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
samgal111 said:
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
Click to expand...
Click to collapse
Did you try diffrent usb port on your cpu?
also..on the cpu that your using odin to flash , do you have kies installed?
if so make sure it isn't running ( i would uninstall just incase)
see if that helps.
Sent from my i9000t XDA app
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
caribbean_spur said:
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
afalk said:
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Click to expand...
Click to collapse
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Dorilife said:
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
Click to expand...
Click to collapse
Thanks for the reply! Ok, I finally manage to have the 3button combo work and get into download mode and recovery mode. I want to root, can you tell me if the odin method works on 2.3.3 stock, on I9000T . Also, How can I fully backup my phone. Which android version did you have when you rooted.
Also, I keep reading those very old threads and I was wondering what the latest Odin version is used for 2.3.3.
elita said:
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Click to expand...
Click to collapse
Tried this workaround, but still no luck with Odin. When fone is in download mode, I get the message apling multi-csc...Installing multi-csc then "unable to access system/csc/H3G/system/".Couldnt roll back the os through kies either before I uninstalled it. Any help highly appreciated
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Wrong button combo
caribbean_spur said:
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Click to expand...
Click to collapse
Turns out We/I have been using the wrong button combo for download. Download mode is: Vol DOWN+Home+Power On.!!! Recovery mode is Vol UP+Home+Power On. I used Fuguroot with my stock kernel from RAMAD (senior developer). Flashed with odin & it took LESS THAN 2 MIN! Check out this link here http://forum.xda-developers.com/showthread.php?t=1011901.Hope this helps. Do remember to thank Ramad and Nicademus!
good you figured out
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
rrubio999 said:
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
Click to expand...
Click to collapse
I don't have a galaxy tab, but it should be similliar to my galaxy s. I think your device is NOT bricked. As long as you can get to download mode, your device is NOT bricked. If you can get there, you should try to flash with odin/heimdall again. I think you must have done something wrong in the flashing process. AFAIK the logo is displayed by bootloader (primary), so if nothing went wrong with flashing the secondary one (download mode), you should be able to flash again.

[Q] My tab (p1000) boot after a restore

Halo everyone!
i need your help wherever you can.
i have a galaxy tab p1000 from MTN in south africa. last week i downloaded overcome kernel and tried to install it through CWM. i download the script to check if my bootloader was blocked, it said no. so i proceeded with the install and everything was ok. then i got a 32GB sd card and moved all my games to there.
what i never realised is that the gyro stopped working with all the games using it.
i thought maybe it was the new kernel, so i decided to restore back the original which i made a backup. after the restore finished my tab just got stuck on the screen where it shows galaxy tab. i can't go to recovery mode anymore but i can go into download mode. So i got a thread on this forum which talks about bricked tabs, i followed the steps but everytime the flashing fails. now my tab is longer detected by my laptop and i still get the same problem.
im still able to get to download mode.
Please if you get reffer me to any solutions that you have come accross, i would really appreciate it!
Thanx
Go to samfirmware.com and download the version of your firmware. Reflash that, be aware that you may need to recheck the bootloaders. Best advice I can give...

Galaxy Note stuck at Samsung logo after automatic update..PLEASE HELP..!!

Hi guys,
First of all m a noob here and got here after doing alot opf research on google but have not find any solution yet. I have got a major issue with Galaxy note, never been rooted.
So I have been using ICS on my Galaxy Note for almost a month now, and a week ago, I saw a message telling me that an update had been downloaded and the phone would be rebooted to install the update.
I clicked the OK button in the dialog box, and my phone did reboot but is now stuck at the flashing Samsung logo (after the initial musical animation, which incidentally was terminated midway).The phone got quite hot after about 20 minutes, so I switched it off by pressing the power button. Then I switched it back on after a while, and it was stuck at the flashing Samsung logo. N now its stuck there..
Restart does not work...
Recharging does not work...
Battery swap does not work..
I contacted the service center, they say they will flash the firmware but all the data will be lost and also they are not taking this in WARRNTY.
Can anyone help me with this please.. its been dead for a week now.
sorry for bad english
re:
Also tried POWER OFF+VOL UP+HOME .. a android green logo comes up. but again phones goes to samsung logo and stucks...
however,POWER OFF+VOL DOWN+HOME button gets me to a yello triangle logo and asks if you want to install custom rom...
Please help me guys...!!
^^
where you using the stock kernel itself on ICS?
do the latter..
boot to download mode, then try to flash your phone back to GB using PC ODIN. Once it's in stock GB, work your way up again to ICS. And oh by the way.. sorry to tell you this, but I don't think you can recover back your data after since this process will erase everything on your phone.
letters_to_cleo said:
^^
where you using the stock kernel itself on ICS?
do the latter..
boot to download mode, then try to flash your phone back to GB using PC ODIN. Once it's in stock GB, work your way up again to ICS. And oh by the way.. sorry to tell you this, but I don't think you can recover back your data after since this process will erase everything on your phone.
Click to expand...
Click to collapse
Thank you for the quick rply Sir,
actually i have no idea about stock kernel, as i said my phone was unrooted ,and only thing i did was using just small cracked apps sometimes.
So which stock GB should i download, there are so many here and m confused which one will work for me.
Thanks in advance Sir.
ankyyy said:
Thank you for the quick rply Sir,
actually i have no idea about stock kernel, as i said my phone was unrooted ,and only thing i did was using just small cracked apps sometimes.
So which stock GB should i download, there are so many here and m confused which one will work for me.
Thanks in advance Sir.
Click to expand...
Click to collapse
hey.. dont' sir me.. we're not in the Army or in the military here okay Just call me John.. that's my name...
Here - >http://forum.xda-developers.com/showthread.php?t=1424997 (courtesy of our good 'ol doc Ketan), Look for the stock GB of your region ( Page #2) and download it on your PC. Use PC Odin to flash it to your phone (in download mode)
letters_to_cleo said:
hey.. dont' sir me.. we're not in the Army or in the military here okay Just call me John.. that's my name...
Here - >http://forum.xda-developers.com/showthread.php?t=1424997 (courtesy of our good 'ol doc Ketan), Look for the stock GB of your region ( Page #2) and download it on your PC. Use PC Odin to flash it to your phone (in download mode)
Click to expand...
Click to collapse
Ok, Thanks again John.
i have i more doubt. The stock rom thread says "Install Kies on your computer, connect your phone and make sure that all the drivers installed correctly". i have installed kies but when i connect my phone to it, it gives me Mtb driver bot installed properly error.. would it create a problem?
Yes it would.. try to completely uninstall and reinstall Kies and try later on, to plug your phone again.
letters_to_cleo said:
Yes it would.. try to completely uninstall and reinstall Kies and try later on, to plug your phone again.
Click to expand...
Click to collapse
Ok John,
M following your steps now,reinstalling kies and then flashing with gb rom. Hope it would work well. Will update you whatever happens.
Thanks again Bro,,!!
Sure! no fret! you can do it.. have confidence in yourself bud.
By the way.. don't forget my sig below?

HELP! My galaxy ace won't boot anymore HELP!

Hello,
I have installed this "ibtimes . co . uk / articles / 419836 / 20130102 / android421-jellybean-cm101-custom-rom-samsung-galaxy . htm" rom on my (actually my mom's) galaxy ace S5830 and it worked just fine. Before i installed it i made a CWM recovery backup. I wasn't happy with the rom so i wanted to go back to my last one by restoring the backup. first i wiped data and cache and then restored the backup. But now when i tried to reboot the system it got stuck on the Samsung logo and later on it was just a light blue screen. can someone help me please.
Don't worry, you need to flash a stock ROM via Odin. Look at the stickies
Sent from my pet- Megatron™
Chill your phone can be fixed easily
Simple Bro , Download the firmware files from sammobile.com then Google for Galaxy Ace Odin ..I guess the version is 4.38 or something like that ..and make sure you download the cooper file with it then flash the original firmware using Odin.So then your phone is back to how it was when you bought it.
I hope this was helpful.
If you want the instructions on how to do this ..let me know ..I'll give you the link for the files also
Help!
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
BscorpionII said:
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
Click to expand...
Click to collapse
Dude! Switch off the phone. Then press the 3key combo to go to Download mode. U don't need to go to recovery either (which is a 2key combo). & ops name should be:-
COOPER_v1.0.ops
Sent Via XDA™ Premium
BscorpionII said:
I'm having the same problem.
I tried to install a new rom on my Samsung Galaxy GT-S5830, but when it was supposed to boot, nothing happend.
I tried to install the original firmware using Odin, but the problem is that I can't connect my phone to my computer.
The only thing my phone is able to do now, is showing the charging screen, opening the samsung recovery mode and accessing the download mode.
I really hope that someone could help me!
Thanks in advance.
PS:
My provider is Vodafone (don't know if it's important)
Click to expand...
Click to collapse
Hi BscorpionII!
As you can open recovery, if you don't have CWM 5.0.2.6 you could install it from your recovery and then try installing another ROM from CWM 5.0.2.6.
You could read this link
"Nielli's [GUIDE] Guides and Tips How to Root SGA, Install CWM5 and install Mods + Downloads"
In the link you'll find the last stable recovery -version 5.0.2.6- and much more.
Good luck.

Categories

Resources