Database Develop

[Q] Help ! My tab p1000 hangs on samsung logo

For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:

You should flash your tab and install a new firmware that's the only solution

omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?

dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...

Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App

to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..

Oké gona try it when i get home
Sent from my X10i using XDA App

jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App

thx for all the help. took me couple of hours but got it running again on andriod 2.3.3

MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i

Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.

Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.

I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.

copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2

Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance

I doubt you will ever get Kies to work with custom ICS rom in your tab.

priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?

who knows Samsung has catch up, then I will be caught out.

kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.

Bricked Galaxy Ace

I'm sorry if this has been asked before but I don't think so... Anyway I had a perfectly working Galaxy Ace coming with stock Android 2.3.4. So I tried rooting it, and I did see the superuser icon but I couldn't apps into the SD card. So I ignored it and downloaded a custom rom and entered recovery mode, wiped data and cache first and rebooted. Then I installed the rom in recovery mode and it said installation successful but when I rebooted I got stuck at the "GALAXY ACE" page and I noticed a weird small blue triangle at the top left hand. And nothing happens. Please help it's nearly brand new! My parents don't know yet... If there is a way to use the com and download the stock rom please provide step by step instructions that was my first smartphone so much help would be appreaciated!

jleonnn said:
I'm sorry if this has been asked before but I don't think so... Anyway I had a perfectly working Galaxy Ace coming with stock Android 2.3.4. So I tried rooting it, and I did see the superuser icon but I couldn't apps into the SD card. So I ignored it and downloaded a custom rom and entered recovery mode, wiped data and cache first and rebooted. Then I installed the rom in recovery mode and it said installation successful but when I rebooted I got stuck at the "GALAXY ACE" page and I noticed a weird small blue triangle at the top left hand. And nothing happens. Please help it's nearly brand new! My parents don't know yet... If there is a way to use the com and download the stock rom please provide step by step instructions that was my first smartphone so much help would be appreaciated!
Click to expand...
Click to collapse
Am not an expert but i would take battery out then put back in holding volume down key home key and power key at sametime to put into download mode then flash your stock rom via odin to get it back running again
have you done a datwipe in cwm after installing? try that first

Hey there!
Before We get to ODIN
Start phone in recovery mode ( Center Button + Power Button ) and then:
- Do a Factory Reset
- Do Wipe Cache
Then Reboot
If he boots great!
If not and still remains at ACE screen do this:
1st - Download Odin 4.38 (http://www.4shared.com/rar/UqBhp5Qd/Odin_Multi_Downloader_v438_www.html)
2nd - Download Cooper.ops (http://hotfile.com/dl/138852983/36a55ea/Cooper_v1.0.ops.rar.html)
3rd - Go to http://www.sammobile.com/firmware/ and search firmware for your s5830
Then choose the rom that suits you best (download one from your country if possible)
After the above steps are done open odin
At "option" select - "One Package, Auto-Reboot And Protect OPS"
At "select OPS" - choose "Cooper.ops" (The file you´ve downloaded)
At bottom is "One Package" - In here put the file of the room you´ve dowloaded
Finaly put phone in download mode (Vol. Down + Power Button) and connect it to your PC.
Wait for odin to recognize your phone, a yellow sign will light up, ( you need samsung kies in your computer so odin recognize your phone)
And then hit "Start"
Wait about five minutes at the end your phone should reboot by itself
And that should be it
If your phone reboots but stuck ate samsung boot animation.
Remove Battery
Put it back again
Turn your phone into recovery mode ( Center Button + Power Button )
Do Wipe Factory/Reset and Wipe cache, reboot,
and your good to go!

I rebooted I got stuck at the "GALAXY ACE" page and I noticed a weird small blue triangle at the top left hand
Click to expand...
Click to collapse
the blue triangle isn't this CWM 5?
or if can you get to recovery mode try flashing the original stock recovery first
http://forum.xda-developers.com/showthread.php?t=1437426
then install a stock rom with Odin
and boot from the stock recovery to fix the phone boot
if recovery is working you should fix the phone easily with stock rom.

installing a stock rom will install the stock recovery by itself!
so no need to flash stock recovery before flashing stock rom!

Can someone please explain what went wrong here in the first place?
Sent from my S5830L using XDA App

Honestly i cannot tell!
But probably the custom rom wasn't compatible!
Or during the rom istallation something went rong
... only suposing

That blue triangle is coz of cwm 4
Sent from my GT-S5830 using xda premium

wellll some custom rom require pre installation of another rom... like INFINITY ICE CREAM SUNDAY they require CM& to be pre installed....
so i would suggest u to reflash 2.3.4 on ur ace using odin...
http://forum.xda-developers.com/showthread.php?t=1071970
if it locks on start screen
go in recovery mode and do a factory reset and cache reset... enjoy
then flash as per instructed on the custom rom page.....

You guys are all wrong .
It's because of CF-ROOT .
You guys should've known from the start LOL
Herpderp Defy.
We could have had it allllllllllllllllllllll
Rolling in the deeeeeeeeeeeeeeeeeep

EmoBoiix3 said:
You guys are all wrong .
It's because of CF-ROOT .
You guys should've known from the start LOL
Herpderp Defy.
We could have had it allllllllllllllllllllll
Rolling in the deeeeeeeeeeeeeeeeeep
Click to expand...
Click to collapse
What's that? I'm still a noob I dunno...

ambujpriyadarshi1991 said:
wellll some custom rom require pre installation of another rom... like INFINITY ICE CREAM SUNDAY they require CM& to be pre installed....
so i would suggest u to reflash 2.3.4 on ur ace using odin...
http://forum.xda-developers.com/showthread.php?t=1071970
if it locks on start screen
go in recovery mode and do a factory reset and cache reset... enjoy
then flash as per instructed on the custom rom page.....
Click to expand...
Click to collapse
For your information,icsunday does not need cm to be pre installed...what you said was completely wrong..
Sent from my SamsungGalaxyAce with my hands,take it or leave it

EmoBoiix3 said:
You guys are all wrong .
It's because of CF-ROOT .
You guys should've known from the start LOL
Herpderp Defy.
We could have had it allllllllllllllllllllll
Rolling in the deeeeeeeeeeeeeeeeeep
Click to expand...
Click to collapse
+1..i people don't know what they are talking about,then they shouldn't reply..
Sent from my SamsungGalaxyAce with my hands,take it or leave it

jleonnn said:
What's that? I'm still a noob I dunno...
Click to expand...
Click to collapse
CF-ROOT is a kernel..
Sent from my SamsungGalaxyAce with my hands,take it or leave it

Can someone please explain CF-ROOT to me pleaseeee

BTW Can someone give me a link for a good working stock rom for my ace? Thanks in advance

jleonnn said:
btw can someone give me a link for a good working stock rom for my ace? Thanks in advance
Click to expand...
Click to collapse
google google and google :d

Doo:DAce said:
google google and google :d
Click to expand...
Click to collapse
I mean a real link... The only link I see is to hotfile and for some reason I CAN'T DOWNLOAD T.T

I've made you a full tuturial!
in there was a link to samfirmware! In samfirmware is all the roms you could ever need!
Keep trying hotfile!
Cause of download limitations sometimes it takes a bit before you can download anything

SnowPluralism said:
I've made you a full tuturial!
in there was a link to samfirmware! In samfirmware is all the roms you could ever need!
Keep trying hotfile!
Cause of download limitations sometimes it takes a bit before you can download anything
Click to expand...
Click to collapse
Alrighty thanks... Cuz on hotfile I pressed download they told me the file was downloading but I couldn't find anything. But thanks nonetheless

Galaxy S Os upgrade questions.

Searching the forum constantly, but I figured I'd ask at the same time.
Heres what i have:
Galaxy S
Rooted
Froyo 2.2
Baseband I9000UGKC1
Kernel 2.6.32.9 [email protected] #4
Buikd FROYO.UGKC1
I've Rooted and Unlocked. I require UNLOCK.
I'd like to upgrade my OS to either JB or ICS whichever is the most stable and smooth. (I'm looking for iPhone smooth.)
I think I'll use Cyanagenmod and Clockwork recovery.
Will This remove my unlock? If so. Is there a way to unlock ICS or JB?
Suggestions, Tips please.
Thanks a bunch.

Liquyd said:
Galaxy S
Rooted
Froyo 2.2
Click to expand...
Click to collapse
First backup your important files to your PC than you must first upgrade to gingerbread 2.3.6 only than you should and can flash ICS and after that JB. you can do the gingerbread upgrade by using KIES or ODIN, and flash again with a semaphore kernel which will give you CWM + root using Odin, after that backup your EFS before flashing ICS using CWM and finally JB with CWM

Thank you. Didn't realize I had to go gingerbread first. Could have ended badly...
By re flashing I lose my unlock. Yes?
There is a way to unlock in JB?
Thanks again.
Sent from my GT-I9000M using Tapatalk 2

Liquyd said:
Thank you. Didn't realize I had to go gingerbread first. Could have ended badly...
By re flashing I lose my unlock. Yes?
There is a way to unlock in JB?
Thanks again.
Sent from my GT-I9000M using Tapatalk 2
Click to expand...
Click to collapse
No, you won't lose your unlock, Read your wiki page for guidance http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series

Sorry for the late reply. I've been fighting for two days with Kies.
I can't get my phone to connect with it.
I believe its a driver issue.
I can let windows find the driver. Phone then is recognized by windows. But doesn't connect to kies. I get an error message.
Tried following the troubleshooting guide in Kies. It installs driver. No connect.
Went to Samsung for driver. No go with Kies again.. I get a message from windows saying my device can perform better using a usb 2.0 port. I was on a 2.0 port.
Got a driver from xda wiki. Same results.. I cannot get kies and my galaxy to work together.
Tried different usb cable (official Samsung). And different USB port.
I'm lost...
**Update**
I just tried on an XP machine. Same thing. 'can't connect to device, please disconnect and try again'...
Should i try a factory restore and start over from the beginning?
Sent from my GT-I9000M using Tapatalk 2

Liquyd said:
Should i try a factory restore and start over from the beginning?
Sent from my GT-I9000M using Tapatalk 2
Click to expand...
Click to collapse
just uninstall KIES, leave the USB drivers, and connect with ODIN to flash a gingerbread 2.3.6 ROM according to your region from here http://forum.xda-developers.com/showthread.php?t=1102881 than root with a semaphore kernel from here http://forum.xda-developers.com/showthread.php?t=1112908 , you will also get CWM with this kernel.
No use wasting time trying to get KIES to work, this is happening to a lot of people , could be due to Microsoft's competition with Samsung. you can get all your softwares , tools etc from here http://forum.xda-developers.com/showthread.php?p=29331775#post29331775

xsenman said:
just uninstall KIES, leave the USB drivers, and connect with ODIN to flash a gingerbread 2.3.6 ROM according to your region from here http://forum.xda-developers.com/showthread.php?t=1102881 than root with a semaphore kernel from here http://forum.xda-developers.com/showthread.php?t=1112908 , you will also get CWM with this kernel.
No use wasting time trying to get KIES to work, this is happening to a lot of people , could be due to Microsoft's competition with Samsung. you can get all your softwares , tools etc from here http://forum.xda-developers.com/showthread.php?p=29331775#post29331775
Click to expand...
Click to collapse
Followed Instructions... Got stuck in boot loop.
now
Phone ! PC image....
Did I Brick it? I could access Download mode. Tried recovery. now I have the Phone ! PC screen...
appreciate any help now... I'm without a phone.

Obviously, your flashing process was interrupted.
First of all, did you backup your data?
2nd, Go to Download mode (Power + Home + Volume Down) then reflash Gingerbread via ODIN.

Liquyd said:
Followed Instructions... Got stuck in boot loop.
now
Phone ! PC image....
Did I Brick it? I could access Download mode. Tried recovery. now I have the Phone ! PC screen...
appreciate any help now... I'm without a phone.
Click to expand...
Click to collapse
Nope, not bricked, Did this happen after you flash ROM or after you flashed the semaphore kernel? anyway...
1) reboot PC as well reboot phone after a battery pull, also take out SIM Card as well as your EXT SD card , reisert battery after pressing power button for a min
2) make sure you had uninstalled the KIES only leaving the Samsung USB drivers
3) go into download mode and flash again the ROM as per instructions on that page.
IF not you can use a i9000 rescue or resurrection kit from http://forum.xda-developers.com/showthread.php?p=29331775#post29331775 , has guides there too
BTW make sure you have good battery charge at least 50% before you flash and never interrupt flashing process

xsenman said:
Nope, not bricked, Did this happen after you flash ROM or after you flashed the semaphore kernel? anyway...
1) reboot PC as well reboot phone after a battery pull, also take out SIM Card as well as your EXT SD card , reisert battery after pressing power button for a min
2) make sure you had uninstalled the KIES only leaving the Samsung USB drivers
3) go into download mode and flash again the ROM as per instructions on that page.
IF not you can use a i9000 rescue or resurrection kit from http://forum.xda-developers.com/showthread.php?p=29331775#post29331775 , has guides there too
BTW make sure you have good battery charge at least 50% before you flash and never interrupt flashing process
Click to expand...
Click to collapse
Thank you so much! Without your help. I'd be knee deep in threads and various topics that made no sense to me.
It was battery.. I gave it a full charge and tried again. Worked. Sorta... Still had a boot loop after flashing GB. Got fed up and hit restore. Upon reboot. GB was there... Flashed sephamore with 0 issues. Running like a charm.
One last thing. Is ICS worth it if GB is working fine? I mean what are the benefits of ICS over GB? My friend swears by ICS on his RAZR should I worry about it on my 9000M?
Big thanks again. Cheers! :good:

my galaxy mini 2 doesn't work after chainfire 3d

Hi guys. I was using cyanogenmod 10 on my S6500D. Works good i think. And i can't play wild blood on my phone. I want to try chainfire 3d. After installing drivers for CF3D my phone is not working. Always restarting on ''samsung'' logo. I can't open recovery mod. I can't open download mod (may be i can sometimes i don't know) I tried to install orginal rom for mini 2. Doesn't work. Please help me. Sorry for bad english.

orome2 said:
Hi guys. I was using cyanogenmod 10 on my S6500D. Works good i think. And i can't play wild blood on my phone. I want to try chainfire 3d. After installing drivers for CF3D my phone is not working. Always restarting on ''samsung'' logo. I can't open recovery mod. I can't open download mod (may be i can sometimes i don't know) I tried to install orginal rom for mini 2. Doesn't work. Please help me. Sorry for bad english.
Click to expand...
Click to collapse
You have soft bricked your phone as CF3D drivers didn work as it was supposed to. First turn off your device by long pressing power key, this works many times even if you are in a boot loop(which is what you are experiencing now). Now like always try to enter recovery mode manually by the combination specified for your device (mine is power+home key+vol. up for recovery and power+home+vol. down for download). If you can enter recovery mode, wipe data and cache and if needed dalvik cache as well but it will take more time for your phone to start the first time after dalvik cache is wiped. This will probably fix your problem. And if it doesn then your next choice is flashing stock rom via odin. Pull your battery, insert it back after 10 seconds. Enter download mode manually and you know how to flash stock rom via odin i suppose. You can find many guides out there as well.. Hopes this helps...

haridevil99 said:
You have soft bricked your phone as CF3D drivers didn work as it was supposed to. First turn off your device by long pressing power key, this works many times even if you are in a boot loop(which is what you are experiencing now). Now like always try to enter recovery mode manually by the combination specified for your device (mine is power+home key+vol. up for recovery and power+home+vol. down for download). If you can enter recovery mode, wipe data and cache and if needed dalvik cache as well but it will take more time for your phone to start the first time after dalvik cache is wiped. This will probably fix your problem. And if it doesn then your next choice is flashing stock rom via odin. Pull your battery, insert it back after 10 seconds. Enter download mode manually and you know how to flash stock rom via odin i suppose. You can find many guides out there as well.. Hopes this helps...
Click to expand...
Click to collapse
i can't open recovery mod. and i can't find stock rom for mini 2. When i prees long power buton my phone doesn't turn off. Still restarting. Please help me guys

Dont worry. Pull battery for 10sec and see if you can enter download mode. check this for your stock rom. This will do for now. You can later search for your region or flash a custom rom.
http://www.samsungroms.com/firmware...00-gingerbread-2-3-6-s6500ailk1-italy-tim-rom
Let me know if it does..

didn't work again. Thank you for your helps but still same problem (sorry for bad English ) I can't reach recovery mod and my phone still restartings on samsung logo. Another solution for that problem? Please help me.

Remove the battery....and put it
Now go to recovery mode....and install a rom.....once I also face this problem
Samsung Galaxy Y-Jellyblast

i can't open recovery mod bro. I press all keys but nothing. I can open download mod only. But i can't do anything.

orome2 said:
i can't open recovery mod bro. I press all keys but nothing. I can open download mod only. But i can't do anything.
Click to expand...
Click to collapse
Dude..! Dont you rememeber..? I told you to enter download mode and use odin to flash the stock rom of which i provided the link..

me too
me too

haridevil99 said:
Dude..! Dont you rememeber..? I told you to enter download mode and use odin to flash the stock rom of which i provided the link..
Click to expand...
Click to collapse
i did it. But same problem still. Can i format my phone without recovery mod?

orome2 said:
i did it. But same problem still. Can i format my phone without recovery mod?
Click to expand...
Click to collapse
You flashed stock firmware using odin..? And, well.. you got two ops to access your phone other than using a Rom and that is recovery and download modes.

haridevil99 said:
You flashed stock firmware using odin..? And, well.. you got two ops to access your phone other than using a Rom and that is recovery and download modes.
Click to expand...
Click to collapse
you gave me S6500 italy stock rom. But i have S6500D. I downloaded S6500D stock rom russia from same site. But it didn't worked. I can reach download mod but i can't reach recovery mod. Can you help me?

orome2 said:
you gave me S6500 italy stock rom. But i have S6500D. I downloaded S6500D stock rom russia from same site. But it didn't worked. I can reach download mod but i can't reach recovery mod. Can you help me?
Click to expand...
Click to collapse
Sure.. I can help you. Check this.. It got what you need and it should work this time. Ignore the stuff mentioned at first of the article coz they are talking bout a perfectly working device and we are facing a worst case scenerio. Download the required files. Uninstall kies if you have it installed coz it will probably clash with Odin trying to access your device and report error. So have just the usb drivers installed and remove kies first. Next do as they say. It should be fine. Let me know if it worked.
http://u-smartphone.blogspot.in/2013/04/update-galaxy-mini-2-s6500-bulk2.html?m=1

haridevil99 said:
Sure.. I can help you. Check this.. It got what you need and it should work this time. Ignore the stuff mentioned at first of the article coz they are talking bout a perfectly working device and we are facing a worst case scenerio. Download the required files. Uninstall kies if you have it installed coz it will probably clash with Odin trying to access your device and report error. So have just the usb drivers installed and remove kies first. Next do as they say. It should be fine. Let me know if it worked.
http://u-smartphone.blogspot.in/2013/04/update-galaxy-mini-2-s6500-bulk2.html?m=1
Click to expand...
Click to collapse
now my phone stucks on samsung logo. But not restartings. I think it is good. I can't reach recovery mod still. So close

orome2 said:
now my phone stucks on samsung logo. But not restartings. I think it is good. I can't reach recovery mod still. So close
Click to expand...
Click to collapse
This might get you back your recovery. Flash this cwm.tar.md5 using odin. select the PDA option and select the .tar.md5 file you got now. Check if it restores your recovery and let me know.
http://www.4shared.com/file/MfJmh2bn/clockworkmod-5028tar.html

haridevil99 said:
This might get you back your recovery. Flash this cwm.tar.md5 using odin. select the PDA option and select the .tar.md5 file you got now. Check if it restores your recovery and let me know.
http://www.4shared.com/file/MfJmh2bn/clockworkmod-5028tar.html
Click to expand...
Click to collapse
i think my phone is dead. Cuz i did it. But still can't reach r. mod. I think i must go phone repair center

orome2 said:
i think my phone is dead. Cuz i did it. But still can't reach r. mod. I think i must go phone repair center
Click to expand...
Click to collapse
If you can enter download mode then dont give up. Try for odin flashable Roms and if you take your phone to service centre, dont tell them what really happened coz it will void your warranty. Tell them it happened while flashing the official stock rom update. It might save you from paying em and also losing your warranty..

haridevil99 said:
If you can enter download mode then dont give up. Try for odin flashable Roms and if you take your phone to service centre, dont tell them what really happened coz it will void your warranty. Tell them it happened while flashing the official stock rom update. It might save you from paying em and also losing your warranty..
Click to expand...
Click to collapse
good idea. But i don't know nomore roms. Can i install cyanogen or another rom via odin?

orome2 said:
good idea. But i don't know nomore roms. Can i install cyanogen or another rom via odin?
Click to expand...
Click to collapse
You can but should have odin flashable files. Well if you find any then you can try it. But trying the ones you got already might work as you got the logo now.

haridevil99 said:
You can but should have odin flashable files. Well if you find any then you can try it. But trying the ones you got already might work as you got the logo now.
Click to expand...
Click to collapse
ohh. Whatever. I mut go repair. I trierd a lot of ways but didn't work. I bored. Thank you for your helps.

[Q] Boot loop, not sure what i did or how to fix

Hey,
Tried to root my galaxy s using this guide:
theandroidsoul .com/how-to-root-xwjw1-firmware-for-galaxy-s-i9000/
First attempt I somehow soft bricked it, did it again and it said sucess but now it's stuck in boot loop.
Complete noob and not really sure what went wrong or where to go from here, any help would be great.

what rom do you use?

自由自我 said:
what rom do you use?
Click to expand...
Click to collapse
I'm not really sure.. I've never messed with my phone much. stock?

Anyone?

Can you go to download mode?
Sent from my GT-I9000 using xda app-developers app

wget21 said:
Can you go to download mode?
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
yeah i can.

loopn said:
Anyone?
Click to expand...
Click to collapse
Nothing to worry..
Access download mode and flash a stock Rom via Odin.

here instruction, but make sure its i9000 first n read carefully
http://forum.xda-developers.com/showthread.php?t=2149455
Sent from my GT-I9000 using xda premium

compacity said:
here instruction, but make sure its i9000 first n read carefully
http://forum.xda-developers.com/showthread.php?t=2149455
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Is there anyway without losing my app data and such? The whole reason I wanted root was to backup my phone.

loopn said:
Is there anyway without losing my app data and such? The whole reason I wanted root was to backup my phone.
Click to expand...
Click to collapse
find cf root, or use semaphore kernel
bootloop becoz wrong kernel flashed, knowing ur build number is important to determine which cf root u needed
if u find da suitable kernel, bootloop will fix by flashing thru odin, but ur sayin u dont even know da version here, so it become more difficult.
here list of cf root
http://forum.xda-developers.com/showthread.php?t=788108
but as i said before da difficulty now is u dont even know ur build number n version but ur sayin u wanna backup ur app data but ur fone bootloop now.
Sent from my GT-I9000 using xda premium

same problem but a bit different
Hello people,
Uhm i am completely new to the forum but i got the same problem.
I somehow got stuck in a boot loop with my sgs gt-i9000.
It gets to the giant S logo and stays there then it starts buzzing now and then.
and i cant get into download mode or recovery mode.
i have been trying everything for almost half a year now and i still cant get in.
maybe you can help?
thanks in advance.

3 button combo? jig?
its juz bootloop, try jig if 3 button combo not working
u sure its i9000? not diff version of i9000?
Sent from my GT-I9000 using xda premium

im sure
The 3 button combo is not working, we tried a jig 2 and i tried multiple 3-BC repairs using Odin, Heimdall and KIES.
and yes i am sure it is a Samsung galaxy S GT-I9000.

scytch said:
The 3 button combo is not working, we tried a jig 2 and i tried multiple 3-BC repairs using Odin, Heimdall and KIES.
and yes i am sure it is a Samsung galaxy S GT-I9000.
Click to expand...
Click to collapse
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps!

Nope not one button combo works i tried it all.

scytch said:
Nope not one button combo works i tried it all.
Click to expand...
Click to collapse
Have you tried everything on this thread:
http://forum.xda-developers.com/showthread.php?t=1134975

You must read this ... Seriously everyone.
akash6969 said:
Try this:
This feature is great for people who
a) Have a bad KIES flash
b) Stuff up their phone somehow
c) Accidentally flash something dodgy via ODIN
d) Some other random occurence
To test this feature you just need to start with your phone turned off... Best way to be sure is to remove the battery.
Then
1. Put battery back in
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power button.
4. When you see the logo pop up release power button ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I hope this helps!
Click to expand...
Click to collapse
DUDE!!!! I have the samsung galaxy s4 att sgh-i337. I recently just tried flashing uxylon from the goo manager . I did standard procedure of factory reset twice, then cache and dalvik cache wipe two times. Just so happens as Im waiting for uXylon or whatever its spelled to flash , my phone decides to stay at the boot screen.... At this point im sweating. After a few minutes i take the battery out and restart regularly . I restart and wait 10 minutes thinking it still may flash uxylon. NOPE. :,( Now im getting really scared. I try to the custom recovery mode.... no twrp OR SYSTEM RECOVERY .... Now Im Falling over scared. I take out battery try again. power , home , volume up , repeatedly . It wont even say booting recovery it only says recovery options then black screen untill I release the buttons. . Then bootloop to logo no recovery. Now Im frantic. I look up adam outler's page on ODIN recovery with stock firmware and ddownload ucuadml and ucuamdb not knwoing which , if either of them , would flash through ODIN. So im frantically flying through the web for 3 hours searching some magic button combo or something that may help me just reach my recoveries in twrp (since the computer would not recognize even in download mode) . I look everywhere. EVERYWHERE. This point i figure i can try odin and its my last chance. Im waiting on the firware to download right now to this second as I type . Somehow God magically guided me to this page though ... because I did about 300 google searches looking for a way to get my twrp back and use my nandroids. NOTHING until now..... I run across this post and move down and come across your post. "have you tried this button combo ? " I read the next comment . "NO no combos worked." Clciked forward a few pages and found nothing. Im giving up ... its over... Either ODIN will work and flash my stock firmware or I will have no way to turn my paper weight back into a cell phone. As Im click the back button i come across THIS post YOUR actual comment. I read it and think ... I didnt try that. I tried it the way you posted. Home + volume up ... nothing happens .... I add the power button and it boots same way as before booloop. Im infuriated..... I press it again the way you posted and suddenly ..... TWRP's beautiful blue screen pops up !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I rostroe my cleanROM 1.0 nand and Im back up . I seriously just want to thank you for posting this little comment that you probably thought would never really help anyone at all. This truly TRULY just saved my phone . I mean you just saved my day , brother. Seriously thank you . Im so happy right now it's like I bought a brand new s4 lol. Thank you so much buddy. Real talk. :highfive:

sky_fox said:
DUDE!!!! I have the samsung galaxy s4 att sgh-i337. I recently just tried flashing uxylon from the goo manager . I did standard procedure of factory reset twice, then cache and dalvik cache wipe two times. Just so happens as Im waiting for uXylon or whatever its spelled to flash , my phone decides to stay at the boot screen.... At this point im sweating. After a few minutes i take the battery out and restart regularly . I restart and wait 10 minutes thinking it still may flash uxylon. NOPE. :,( Now im getting really scared. I try to the custom recovery mode.... no twrp OR SYSTEM RECOVERY .... Now Im Falling over scared. I take out battery try again. power , home , volume up , repeatedly . It wont even say booting recovery it only says recovery options then black screen untill I release the buttons. . Then bootloop to logo no recovery. Now Im frantic. I look up adam outler's page on ODIN recovery with stock firmware and ddownload ucuadml and ucuamdb not knwoing which , if either of them , would flash through ODIN. So im frantically flying through the web for 3 hours searching some magic button combo or something that may help me just reach my recoveries in twrp (since the computer would not recognize even in download mode) . I look everywhere. EVERYWHERE. This point i figure i can try odin and its my last chance. Im waiting on the firware to download right now to this second as I type . Somehow God magically guided me to this page though ... because I did about 300 google searches looking for a way to get my twrp back and use my nandroids. NOTHING until now..... I run across this post and move down and come across your post. "have you tried this button combo ? " I read the next comment . "NO no combos worked." Clciked forward a few pages and found nothing. Im giving up ... its over... Either ODIN will work and flash my stock firmware or I will have no way to turn my paper weight back into a cell phone. As Im click the back button i come across THIS post YOUR actual comment. I read it and think ... I didnt try that. I tried it the way you posted. Home + volume up ... nothing happens .... I add the power button and it boots same way as before booloop. Im infuriated..... I press it again the way you posted and suddenly ..... TWRP's beautiful blue screen pops up !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! I rostroe my cleanROM 1.0 nand and Im back up . I seriously just want to thank you for posting this little comment that you probably thought would never really help anyone at all. This truly TRULY just saved my phone . I mean you just saved my day , brother. Seriously thank you . Im so happy right now it's like I bought a brand new s4 lol. Thank you so much buddy. Real talk. :highfive:
Click to expand...
Click to collapse
Glad it worked for you!! Lots of people on this Forum have helped me out when I was in a similar situation, I'm really happy that it helped you..
Enjoy your phone!:good:

akash6969 said:
Glad it worked for you!! Lots of people on this Forum have helped me out when I was in a similar situation, I'm really happy that it helped you..
Enjoy your phone!:good:
Click to expand...
Click to collapse
Thats what its all about bro. Advancing that community . More commmunity helped out the more testing of these great works of the awesome developers. I know some on the forums would say thats wrong but you showed me what it all about. Good luck , man. Thanks for the help.

compacity said:
find cf root, or use semaphore kernel
bootloop becoz wrong kernel flashed, knowing ur build number is important to determine which cf root u needed
if u find da suitable kernel, bootloop will fix by flashing thru odin, but ur sayin u dont even know da version here, so it become more difficult.
here list of cf root
http://forum.xda-developers.com/showthread.php?t=788108
but as i said before da difficulty now is u dont even know ur build number n version but ur sayin u wanna backup ur app data but ur fone bootloop now.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Got it going again, now the storage doesnt seem to be working, won't scan on startup.