I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Uh... sounds like something is seriously wrong with your phone dude =\ You should be able to get to d/l mode regardless. Does the phone still work fine otherwise?
Unable to root sgs gingerbread NEJVD
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
samgal111 said:
I have the same problem after upgrading to official firmware via kieys. Running PDA:I9000NEJVD, PHONE:I9000NEJV5, CSC:H3GJV6 on 3mobile. Odin doesn't recognise phone in download mode, computer only reads onboard sd card when connected as usb storage. Tried one superoneclick too but stops at running pnueter exploit/gingerbreak exploit. Super laggy as well, Can i roll back to froyo? any help highly appreciated.
Click to expand...
Click to collapse
Did you try diffrent usb port on your cpu?
also..on the cpu that your using odin to flash , do you have kies installed?
if so make sure it isn't running ( i would uninstall just incase)
see if that helps.
Sent from my i9000t XDA app
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
caribbean_spur said:
I am interested in rooting too, and I have gingerbread. I have 2 problems though, first, I do not have the 3button combo working. I thought the gingerbread update would fix it, but no luck, and the method I found here did not work. I hear that you should not try to root without the 3 button combo working, but what choice do I have, samsung update did not fix this bootloader problem. I cannot put my phone in download mode without having it plugged in and recognized by adb.
My 2nd problem is that I have a I9000T and it seems nobody has this phone around here so I have no way of knowing if some of the rooting options even work for my phoen and firmeware.
Any help would be greatly appreciated.
Click to expand...
Click to collapse
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
afalk said:
I can't root my sgs, i have tryed almost every tutorials i can find about this, but i can't connect to odin when the phone is in download mode. I even get this up in download mode: can't access to '/system/csc/xee/system/' Anyone that can help me with this issue?
Click to expand...
Click to collapse
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Dorilife said:
I actually have a i9000t, ive soft bricked a few times as long as you could get into download mode you should be ok, allways keep a stock rom around just incase to flash back to through odin.
Ive flashed a few modem with no problems, few roms with minimal problems..
Cm7 lost radio and weird pixle screen boot.
Deoxidized roms work good.
I had flashed Darkys 9.5 and everything worked till i noticed the stock music player gave me reboots.
I had tried flashing MIUI but no luck at all, could of been my zip. File was messed up but i tried a diffrent and still nothing.Now im on Darky 10.1 final no problems.
This has to be the most stable/fastest rom ive ever flashed.
Edit i looked up something that might help.. http://forum.xda-developers.com/showthread.php?t=723596
Sent from my i9000T XDA premium app
Click to expand...
Click to collapse
Thanks for the reply! Ok, I finally manage to have the 3button combo work and get into download mode and recovery mode. I want to root, can you tell me if the odin method works on 2.3.3 stock, on I9000T . Also, How can I fully backup my phone. Which android version did you have when you rooted.
Also, I keep reading those very old threads and I was wondering what the latest Odin version is used for 2.3.3.
elita said:
hi.. do you have official kies installed on your computer?
if so uninstall it first... and installed the unofficial samsung driver.. sorry i cant post link here as am junior member..
you can search in google "samsung usb.rar". Once you download it, then installed it on your computer. Open you odin, put your phone in download mode,
and plug in to computer, then odin should be able to recognize your phone.
Once I have the same problem and it works for me with above step. hope that help.
Click to expand...
Click to collapse
Tried this workaround, but still no luck with Odin. When fone is in download mode, I get the message apling multi-csc...Installing multi-csc then "unable to access system/csc/H3G/system/".Couldnt roll back the os through kies either before I uninstalled it. Any help highly appreciated
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Wrong button combo
caribbean_spur said:
Would definitely would like to know how to root 2.3.3 (UBJV6)? Is there anything specia; I have to do since I have recovery 3e too?
Any help will be welcome!
Click to expand...
Click to collapse
Turns out We/I have been using the wrong button combo for download. Download mode is: Vol DOWN+Home+Power On.!!! Recovery mode is Vol UP+Home+Power On. I used Fuguroot with my stock kernel from RAMAD (senior developer). Flashed with odin & it took LESS THAN 2 MIN! Check out this link here http://forum.xda-developers.com/showthread.php?t=1011901.Hope this helps. Do remember to thank Ramad and Nicademus!
good you figured out
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
rrubio999 said:
Hi, I did something stupid... I been trying to upload gingerbread to my Galaxy Tab. and I used re-partition.. so now I bricked.. It starts with samsug logo and after stops showing only the samsung galaxy..
Please Help me...
Thanks Guys
Click to expand...
Click to collapse
I don't have a galaxy tab, but it should be similliar to my galaxy s. I think your device is NOT bricked. As long as you can get to download mode, your device is NOT bricked. If you can get there, you should try to flash with odin/heimdall again. I think you must have done something wrong in the flashing process. AFAIK the logo is displayed by bootloader (primary), so if nothing went wrong with flashing the secondary one (download mode), you should be able to flash again.
Related
Hello all and thx in advance.
ATT Captivate batch 1010
I had Cognition 2.3 I think on my phone and it worked great however I wanted to try a different ROM so I attempted to restore my phone to stock using ODIN one click. I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Now I am stuck in a boot loop that either shows the white ATT logo screen flashing every couple seconds or the phone off charge screen re starting every couple seconds.
I bought a USB Jig and it works great so I can get into D/L mode easily but I have tried flashing the stock firmware at least 6 times now using different machines, different ports, different versions of ODIN and I've searched around these forums and others for several hours trying to find a solution. It seems that I needed to erase my user data in recovery mode and removed the lag fix before I did this but it is what it is. I have tried to get to recovery mode to no avail. All I can get to is download mode.
Any ideas on what I should/can do?
any help will be greatly appreciated.
Rob
Aircraft123 said:
I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Click to expand...
Click to collapse
Neither are necessary for Odin use.
ATT Captivate batch 1010
Click to expand...
Click to collapse
I think that you may need to use the Froyo Odin (JI6).
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
CM7
please help, i have the same problem, was flashing back to stock from a serendipit 5.12 so that i could get the 6.0 version... all went as planned until odin said "reset" which was my cue to unplug and that the process was complete.... i unplugged the phone and tried to reboot and now it does exactly as the first post described, at&t logo then black screen, then back to the at&t logo then black screen again... my computer doesnt recognize my phone none of the methods of getting to download screen will work... no matter how many times i pull the sd, sim, and batt, no matter the button combination i use or which order i use them in.... same result... i cant afford a new phone i need help, i will donate also... i knew this stuff was over my head, but "curiosity killed the cat" i guess...
I had the exact same problem. Try this method, it's the one that worked for me when all others failed... But remember to follow it EXACTLY.
1. Pull out the battery.
2. Hold Volume UP+DOWN (Don't let go of them until you see the download screen).
3. Stick in the USB (which is connected to the computer).
4. Put the battery back in.
If not, you might need to get a USB Jig.
That Froyo Odin link worked!
Thanks guys I flashed to Froyo and it worked!
I've since flashed clockwork recovery and gotten Serendipity 6.1
As far as getting into download mode I had to use one of the USB jigs.
I ordered one from the guy who does the rom reviews but you could make one as well.
On another note the new ROM seems to be discharging my battery really fast
Before I start investigating it as a problem I am going to charge it completely then let it discharge completely to calibrate it.
Thanks again guys
Rob
I just fixed mine last night, I had the exact same problem because of the exact same upgrade. What you need to do is get or make a usb jig. There's a couple resources around here for how to do it.
Here's a video showing how to make one:
http://www.youtube.com/watch?v=Rdn5GoRjhn0
Once I got my phone into download mode, I used Darky's ROM Resurrection Edition ( http://forum.xda-developers.com/showthread.php?t=940671 ) to restore my phone. Just scroll down to where it says "Files Needed" and download the Captivate version. Once you have that downloaded, use the jig to put your phone into download mode and follow the directions in the Darky's video (jump to about 2:30 into the video). Once I had my phone booting, I used clockwork to install Serendipity 6.
Hope that helps you as much as it helped me!!
went to radio shack, got all the stuff to make a jig and i was able to get my phone into download mode! now to try darko...... thanks everyone!
odin doesnt reconize phone
which odin3 are you using? 1.7? or the one click to stock?
you mentioned you had the bootloop problem before, so you should be using odin 1.7 with 2.2 stock.
open odin
get phone into download mode with your nice jig
unplug jig and plug in computer
box in odin should turn yellow.
And make sure you have the correct drivers installed. CRUCIAL.
Multiupload links not working
I'm stuck in the same situation as the OP.
I've been trying to use the method mentioned in the quote below, but the multiupload links are not working for me. I've been trying for 2 days to get to these files.
Breakin' Ranh said:
**Another thing, read the whole thing before doing it! If you're not confident whatsoever about this process, don't do it**
1. Download the following:
I897UCJH2 Firmware
password: samsung-firmwares.com
http://www.multiupload.com/B5OFPPOJFZ
512 PIT
http://www.multiupload.com/I5WICSBFJ1
ODIN3
http://www.multiupload.com/DLS7TWUVPY
Click to expand...
Click to collapse
Here's a link to the thread for more clarification:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36I've
Would anyone happen to have these files and be willing to share them?
^
Have u tried the Odin or Heimdall One Clicks in the development stickied thread ??
Sent by XDA Premium App
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
lllll Nova lllll said:
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
Click to expand...
Click to collapse
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
ScruffMcG said:
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
Click to expand...
Click to collapse
If one-clicks aren't working, you might need to grab the full version of Heimdall or Odin and flash a full package. Some of the newer phone builds don't like one-clicks.
^ +1
See this thread...the original Stock i897ucKK4 thread... http://forum.xda-developers.com/showthread.php?p=19587108
Then see post #57 for the regular Odin to use and instructions on what to do with the firmware.
Sent from my SAMSUNG-SGH-I777 using xda premium
For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:
You should flash your tab and install a new firmware that's the only solution
omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...
Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App
to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..
Oké gona try it when i get home
Sent from my X10i using XDA App
jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App
thx for all the help. took me couple of hours but got it running again on andriod 2.3.3
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.
Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2
Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
I doubt you will ever get Kies to work with custom ICS rom in your tab.
priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?
who knows Samsung has catch up, then I will be caught out.
kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.
Hi guys,
In my hands come SGS which cant boot up, same trouble like in this video:
http://www.youtube.com/watch?v=MsGuKUv_s2s&feature=related
but my SGS bootloopin´ this.I have instaled Kies, and shut down Kies and Kies tray agent(Only for Driver to ODIN).But it didnt work, so i have linstaled another drivers, and nothing new.Phone boot up to download mode without problems, but cant boot up to recovery.I have to try tutorial with download mode(Like with JIG) without JIG and didnt work.So what must i do to save the phone?Thanks for all answers.
Not really clear but if you can get into download mode and Odin recognizes phone then flash new firmware. But I suspect you are saying Odin isn't detecting the device.
Sent from my GT-I9100T
Buy usb jig on ebay, put it in downlaod mode and reflash some stock kernel. It should do the trick.
Sent from my GT-I9000 using XDA App
if you were flashing an ics based rom you need nexus s driver's on the PC for Odin to see your phone as the stock Samsung one is no use now.
Sent from my GT-I9000 using xda premium
I`m in trouble
Hi guys.
I can`t make my windows 7 recognize the SGS...I`ve already tried the USB_samsung drivers, even for Nexus...but the error 43 always appears.
I can turn on the phone in CWM but anything can be done, always data problems...so I only can put it on Download Mode, but I can`t download anything, the Odin doesn`t have a Comm Port communication.
I was restoring for Factory Default when it happens...I was using the MyUltimate 1.3...after I flashed the ICS RC 4.2...and now anything works.
Sorry about my English...I`m Brazilian.
I really appreciate any kind of help.
picture of my problem
I forgot to post a picture of the CWM messages...it`s attached...thanks a lot
I Have same problem, ODIN cant recognize phone, drivers and PC is ok, i have next Galaxy and is workin with ODIN without problem.But with this SGS, which cant boot up ODIN didnt comunicate, some ideas?
no idea
Thompson111 said:
I Have same problem, ODIN cant recognize phone, drivers and PC is ok, i have next Galaxy and is workin with ODIN without problem.But with this SGS, which cant boot up ODIN didnt comunicate, some ideas?
Click to expand...
Click to collapse
I have no idea...i`m reading many help option in differents Android/SGS forums, but anything is going well...
Does anybody know if doing a JIG download, like if the device was bricked wouls resolve?
I accidentally installed a capitvate i897 firmware (Android 2.3.4, AT&T branded) on my i9000. It looks like an US firmware, mine should be German.
Since installation of the new firmware I can't use the usb-connection anymore - some seconds after plugging the phone resets and stops working until I unplug the cable again. The 3-button-trick doesn't work anymore either, probably because the captivate hardware is quite different.
So... now I am desparately looking for any help or hints how I can get my phone rootet. I think that would help a lot to install a proper firmware again (via mobile odin).
Any hints?
Gingerly said:
I accidentally installed a capitvate i897 firmware (Android 2.3.4, AT&T branded) on my i9000. It looks like an US firmware, mine should be German.
Since installation of the new firmware I can't use the usb-connection anymore - some seconds after plugging the phone resets and stops working until I unplug the cable again. The 3-button-trick doesn't work anymore either, probably because the captivate hardware is quite different.
So... now I am desparately looking for any help or hints how I can get my phone rootet. I think that would help a lot to install a proper firmware again (via mobile odin).
Any hints?
Click to expand...
Click to collapse
You wouldn't really be going wrong by flashing back with Odin. I'd recommend flashing stock JW4 which is the latest European Gingerbread and rooting with the JW4 CF-ROOT.
I would have flashed already if I knew how to do it USB doesn't work, and entering recovery mode (if it is available, which I doubt) doesn't work either because I can't press the right buttons.
Gingerly said:
I would have flashed already if I knew how to do it USB doesn't work, and entering recovery mode (if it is available, which I doubt) doesn't work either because I can't press the right buttons.
Click to expand...
Click to collapse
u need to download 3 file odin from here http://www.hotfile.com/dl/150483619/708026d/I9000XXJW4_I9000OXAJW4_XEU.zip.html
and u will need also odin program from here http://www.filecrop.com/Odin-1.85.html after u download the firmware extract it and open odin
then put code in pda box modem on phone box an csc on csc box after that push vol down+home+power for download mode conect your phone to the computer and wait for yellow light in the program after thet press start good. luck btw if its only one file firmware put it on pda only
and if download mode not work with 3 button comb try jig device
Thanks for your detailed answer. But the 3-button-combo doesn't work. My guess is that the phone expects the captivate combo (volume up + volume down + power) which isn't possible on an i9000 device.
A jig might be worth a try, though I am worried, because the phone crashes always as soon as it get's power via usb (phone-pc or phone-power suppy, in both cases the phone crashes).
Is it possible to root the phone via wifi or right on the phone via app or some weird linux command line stuff?
You could try z4root? I don't think it will work but worth a try
Sent from my GT-I9000 running remICS-UX using XDA premium
Gingerly said:
Thanks for your detailed answer. But the 3-button-combo doesn't work. My guess is that the phone expects the captivate combo (volume up + volume down + power) which isn't possible on an i9000 device.
A jig might be worth a try, though I am worried, because the phone crashes always as soon as it get's power via usb (phone-pc or phone-power suppy, in both cases the phone crashes).
Is it possible to root the phone via wifi or right on the phone via app or some weird linux command line stuff?
Click to expand...
Click to collapse
Yes, I think it's worth a try, to download a SGS Kernel and try the App "SGS Kernel Flasher" (Search in Playstore, can't post a link) Maybe it works! I think you won't be able to boot your system after that, but maybe you can use the 3 button combo after that.
But first you have to find a way to root the phone... i can't find a app for that atm, maybe someone else found one?
------------------------------------------------------------------------------
EDIT
------------------------------------------------------------------------------
If you get root working, you can safely use this to flash the right firmware for your phone: http://forum.xda-developers.com/showthread.php?t=1347899
It's Odin on your mobile, so you can copy the files via an ftp or something like this and flash them to solve ur problem.
The other method I listed is a bit unsafe i think...
Actually, you can press Volume Up and Volume Down at the same time on a SGS. I tried it, because CM9 has the feature to change ringer mode this way.
nahum05 said:
u need to download 3 file odin from here http://www.hotfile.com/dl/150483619/708026d/I9000XXJW4_I9000OXAJW4_XEU.zip.html
and u will need also odin program from here http://www.filecrop.com/Odin-1.85.html after u download the firmware extract it and open odin
then put code in pda box modem on phone box an csc on csc box after that push vol down+home+power for download mode conect your phone to the computer and wait for yellow light in the program after thet press start good. luck btw if its only one file firmware put it on pda only
and if download mode not work with 3 button comb try jig device
Click to expand...
Click to collapse
Hello, More or less had the same problem.
To tell you the history: updated my samsung galaxy S I9000 to ICS, was not happy with it and f*cked up after that.
Wanted to install older firmware over ICS, telephone dead and than came on this forum and used
stockrom of I896 from developer TRusselo : http://forum.xda-developers.com/showthread.php?t=979133
now phone thinks he is a canadian I896.... Tried the above steps on PDA... unpacked ok but now phone keeps rebooting after it shows the samsunglogo....
did i miss a final step or did i do something wrong?
Thanks for your help in advance...
@calumn96: I tried z4root, it doesn't work..
@coroner21: wow! I always thought the both volume buttons would exclude each other. Now I can enter CWM.
Is there a way to root the i9000 in CWM? Or even better, to install a stock i9000 firmware?
Current situation: i897-firmware (2.3.4 uckh3) - I guess I need a root patch for this firmware.
Gingerly said:
@calumn96: I tried z4root, it doesn't work..
@coroner21: wow! I always thought the both volume buttons would exclude each other. Now I can enter CWM.
Is there a way to root the i9000 in CWM? Or even better, to install a stock i9000 firmware?
Current situation: i897-firmware (2.3.4 uckh3) - I guess I need a root patch for this firmware.
Click to expand...
Click to collapse
If you get a rooted i879 kernal you could try flashing that in cwm? You could try flashing a custom gb ROM from it (put files on a as card then in phone so not to use USB)
Sent from my GT-I9000 running remICS-UX using XDA premium
Gingerly said:
@calumn96: I tried z4root, it doesn't work..
@coroner21: wow! I always thought the both volume buttons would exclude each other. Now I can enter CWM.
Is there a way to root the i9000 in CWM? Or even better, to install a stock i9000 firmware?
Current situation: i897-firmware (2.3.4 uckh3) - I guess I need a root patch for this firmware.
Click to expand...
Click to collapse
Go into download mode
for i9000 it's volume down + home + power
for i897 it's both volume keys, and with the usb cable into the phone + power.
If you see the yellow triangle with and android and a shovel that's it!
Then get a stock firmware for i9000 on www.smafirmware.com and flash it through odin with the .pit + 3 files (PDA + MODEM + CSC).
@calum96: I will give it a try.
@-m3ta- : USB doesn't work, so any tips involving a usb-cable won't help :/
Another thing I realized is that recharging is barely possible...
Odin and Samfirmware is the way to go
Sent from my GT-I9300 using Tapatalk 2
Gingerly said:
@calum96: I will give it a try.
@-m3ta- : USB doesn't work, so any tips involving a usb-cable won't help :/
Another thing I realized is that recharging is barely possible...
Click to expand...
Click to collapse
I don't understand why 3 combo key, USB won't work. I had flash a captivate firmware onto the i9000 and the regular trick worked
@MrAndroid12: I don't understand it either. But the phone crashes as soon as the usb is plugged. Recharging didn't work at all, the phone just got hot and that's it.
@calum96: thank you! I flashed dmore 3.3 and so far it looks good. No usb-crashes anymore and the phone acts as it should. There is still an AT&T-brand, but that's still better than a useless phone
Gingerly said:
@MrAndroid12: I don't understand it either. But the phone crashes as soon as the usb is plugged. Recharging didn't work at all, the phone just got hot and that's it.
@calum96: thank you! I flashed dmore 3.3 and so far it looks good. No usb-crashes anymore and the phone acts as it should. There is still an AT&T-brand, but that's still better than a useless phone
Click to expand...
Click to collapse
You might be able to change the brands thing in build.props? Not sure tbh
So is it on i9000 firmware now? or is it just rooted? And is USB working now?
Sent from my GT-I9000 running remICS-UX using XDA premium
Everything works like a charm now
i9000 firmware (slim ics right now), usb works, recharging works and people can finally call me again (didn't work before either)
Thanks again for all your help, guys!
Glad to hear try remics its really good smooth with a Samsung feel
Sent from my GT-I9000 running remICS-UX using XDA premium
Searching the forum constantly, but I figured I'd ask at the same time.
Heres what i have:
Galaxy S
Rooted
Froyo 2.2
Baseband I9000UGKC1
Kernel 2.6.32.9 [email protected] #4
Buikd FROYO.UGKC1
I've Rooted and Unlocked. I require UNLOCK.
I'd like to upgrade my OS to either JB or ICS whichever is the most stable and smooth. (I'm looking for iPhone smooth.)
I think I'll use Cyanagenmod and Clockwork recovery.
Will This remove my unlock? If so. Is there a way to unlock ICS or JB?
Suggestions, Tips please.
Thanks a bunch.
Liquyd said:
Galaxy S
Rooted
Froyo 2.2
Click to expand...
Click to collapse
First backup your important files to your PC than you must first upgrade to gingerbread 2.3.6 only than you should and can flash ICS and after that JB. you can do the gingerbread upgrade by using KIES or ODIN, and flash again with a semaphore kernel which will give you CWM + root using Odin, after that backup your EFS before flashing ICS using CWM and finally JB with CWM
Thank you. Didn't realize I had to go gingerbread first. Could have ended badly...
By re flashing I lose my unlock. Yes?
There is a way to unlock in JB?
Thanks again.
Sent from my GT-I9000M using Tapatalk 2
Liquyd said:
Thank you. Didn't realize I had to go gingerbread first. Could have ended badly...
By re flashing I lose my unlock. Yes?
There is a way to unlock in JB?
Thanks again.
Sent from my GT-I9000M using Tapatalk 2
Click to expand...
Click to collapse
No, you won't lose your unlock, Read your wiki page for guidance http://forum.xda-developers.com/wiki/index.php?title=Samsung_Galaxy_S_Series
Sorry for the late reply. I've been fighting for two days with Kies.
I can't get my phone to connect with it.
I believe its a driver issue.
I can let windows find the driver. Phone then is recognized by windows. But doesn't connect to kies. I get an error message.
Tried following the troubleshooting guide in Kies. It installs driver. No connect.
Went to Samsung for driver. No go with Kies again.. I get a message from windows saying my device can perform better using a usb 2.0 port. I was on a 2.0 port.
Got a driver from xda wiki. Same results.. I cannot get kies and my galaxy to work together.
Tried different usb cable (official Samsung). And different USB port.
I'm lost...
**Update**
I just tried on an XP machine. Same thing. 'can't connect to device, please disconnect and try again'...
Should i try a factory restore and start over from the beginning?
Sent from my GT-I9000M using Tapatalk 2
Liquyd said:
Should i try a factory restore and start over from the beginning?
Sent from my GT-I9000M using Tapatalk 2
Click to expand...
Click to collapse
just uninstall KIES, leave the USB drivers, and connect with ODIN to flash a gingerbread 2.3.6 ROM according to your region from here http://forum.xda-developers.com/showthread.php?t=1102881 than root with a semaphore kernel from here http://forum.xda-developers.com/showthread.php?t=1112908 , you will also get CWM with this kernel.
No use wasting time trying to get KIES to work, this is happening to a lot of people , could be due to Microsoft's competition with Samsung. you can get all your softwares , tools etc from here http://forum.xda-developers.com/showthread.php?p=29331775#post29331775
xsenman said:
just uninstall KIES, leave the USB drivers, and connect with ODIN to flash a gingerbread 2.3.6 ROM according to your region from here http://forum.xda-developers.com/showthread.php?t=1102881 than root with a semaphore kernel from here http://forum.xda-developers.com/showthread.php?t=1112908 , you will also get CWM with this kernel.
No use wasting time trying to get KIES to work, this is happening to a lot of people , could be due to Microsoft's competition with Samsung. you can get all your softwares , tools etc from here http://forum.xda-developers.com/showthread.php?p=29331775#post29331775
Click to expand...
Click to collapse
Followed Instructions... Got stuck in boot loop.
now
Phone ! PC image....
Did I Brick it? I could access Download mode. Tried recovery. now I have the Phone ! PC screen...
appreciate any help now... I'm without a phone.
Obviously, your flashing process was interrupted.
First of all, did you backup your data?
2nd, Go to Download mode (Power + Home + Volume Down) then reflash Gingerbread via ODIN.
Liquyd said:
Followed Instructions... Got stuck in boot loop.
now
Phone ! PC image....
Did I Brick it? I could access Download mode. Tried recovery. now I have the Phone ! PC screen...
appreciate any help now... I'm without a phone.
Click to expand...
Click to collapse
Nope, not bricked, Did this happen after you flash ROM or after you flashed the semaphore kernel? anyway...
1) reboot PC as well reboot phone after a battery pull, also take out SIM Card as well as your EXT SD card , reisert battery after pressing power button for a min
2) make sure you had uninstalled the KIES only leaving the Samsung USB drivers
3) go into download mode and flash again the ROM as per instructions on that page.
IF not you can use a i9000 rescue or resurrection kit from http://forum.xda-developers.com/showthread.php?p=29331775#post29331775 , has guides there too
BTW make sure you have good battery charge at least 50% before you flash and never interrupt flashing process
xsenman said:
Nope, not bricked, Did this happen after you flash ROM or after you flashed the semaphore kernel? anyway...
1) reboot PC as well reboot phone after a battery pull, also take out SIM Card as well as your EXT SD card , reisert battery after pressing power button for a min
2) make sure you had uninstalled the KIES only leaving the Samsung USB drivers
3) go into download mode and flash again the ROM as per instructions on that page.
IF not you can use a i9000 rescue or resurrection kit from http://forum.xda-developers.com/showthread.php?p=29331775#post29331775 , has guides there too
BTW make sure you have good battery charge at least 50% before you flash and never interrupt flashing process
Click to expand...
Click to collapse
Thank you so much! Without your help. I'd be knee deep in threads and various topics that made no sense to me.
It was battery.. I gave it a full charge and tried again. Worked. Sorta... Still had a boot loop after flashing GB. Got fed up and hit restore. Upon reboot. GB was there... Flashed sephamore with 0 issues. Running like a charm.
One last thing. Is ICS worth it if GB is working fine? I mean what are the benefits of ICS over GB? My friend swears by ICS on his RAZR should I worry about it on my 9000M?
Big thanks again. Cheers! :good: