For about a week now my samsung galaxy tab p1000 keeps freezing on the samsung logo screen and every minute ore so vibrates very short.
No matter how long i wait it keeps like that . Ive tryed the reset from the recovery mode (powerbutton + volume up) but no luck. The tab is still on a stock fw 2.2 i believe. and no root or anything.
Im very new on the whole rom stuf so some help is needed on how to restore the tab. I havent flashed it or anithing. Also it gives a error like in the screenshot below:
You should flash your tab and install a new firmware that's the only solution
omr911 said:
You should flash your tab and install a new firmware that's the only solution
Click to expand...
Click to collapse
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
dude... get the latest 2.3.3 firmware...
you may check www.samfirmware.com to see latest firmware for your deivce. If you are in ASIA region, look for JPI edition. Its good, fast and stable.
Use ODIN to flash, with REPARTITION ENABLE... once complete flashing, reboot, and repeat the FLASHING again... DO IT TWICE..., but REPARTITION ONCE only...
Do i have to fully boot between flashing, or after first flash straight to download mode?
Sent from my X10i using XDA App
to play safe, let it boot.. but you can skip the configuration and shutdown and go into download mode..
Oké gona try it when i get home
Sent from my X10i using XDA App
jhnschts said:
oke i figured that much yesterday, when reading some topics, but wich rom do i need to use?? because i dont know how to root the tab because it wont boot ore is rooting not a must?
Click to expand...
Click to collapse
You should watch the tutorial at YouTube before taking any step
Sent from my GT-P1000 using XDA App
thx for all the help. took me couple of hours but got it running again on andriod 2.3.3
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Im at your same state. My tab hangs on samsung logo and lets me to download alone. I can help you with the drivers part. Im sure you have the Kies in your system. Just push the on button and connect your phone to the pc and run Kies. You have an option to troubleshoot which will update the drivers for your phone. This worked for me. For the rest of the part, there is a chap who is helping me on this forum and he advised me to go for stock ROM. Ill try that today after sufficiently charging up my phone.
I ve been searching for a while now and looks like this is common and nothing much to worry about. Ill keep you posted on what happened on my attempt to odin flash the stock ROM.
Hello friend, my tab is back and working fine now. Hope tried connecting kies to get your driver up for the tab. Once its up you can get to the download and flash stock rom using odin. This would bring your phobe back to life.
I am currently running on overcome experience rom. Its pretty good and they have great instructions on their site. Try that you should be all set.
Best of luck.
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
copper7op said:
I have the exact same issue. I've been trying to flash a Euro 2.3.3 for the last 5 hours. Anything special you did before I create a new thread? I've done this a billion times on my old tab....I just got this one today off ebay.
Click to expand...
Click to collapse
Can you be more specific on the state of your G-Tab?
What firmware were you using before the problem occurs?
if you are updating from proyo, you will need to flash dbdata.rfs. For your reference you can follow these following steps (given you can access download mode).
http://forum.xda-developers.com/showpost.php?p=24908470&postcount=2
Thanks a lot
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here and its working after selecting factory reset.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
---------- Post added at 06:24 PM ---------- Previous post was at 06:17 PM ----------
I had tried to install ICS but done something wrong and my tab wasn't working.
after that followed instructions given here( including flashing twice with partion uncheck for second) but tab was hanging at samsung logo and its working after selecting factory reset from recovery option.
Now only problem i have is kies don't show my tab's firmware version. And i also wanted to know how to store backup taken at ICS update thanks in advance
I doubt you will ever get Kies to work with custom ICS rom in your tab.
priyana said:
I doubt you will ever get Kies to work with custom ICS rom in your tab.
Click to expand...
Click to collapse
Hahaha.. you are still doubting? -- or should you have said you're sure?
who knows Samsung has catch up, then I will be caught out.
kurs2020 said:
MY P1000 JUST HANG ON GALAXY TAB LOGO, CANT CONNECT TO CWM BUT CAN GO TO DOWNLOAD MODE BUT I CANT CONNECT IT TO PC!!!
sirs,,, can you please help me please! I GOT A samung galaxy tab p1000 and its rooted and installed overcome rom, i restored my stocktrom coz id like to get some files \. then suddenly my p1000 just hang on galaxy tab logo!!! it wont access to cwm recovery but it can access download mode the problem is my computer dont recognize my device!! nid help please!!!
( the latest) i
Click to expand...
Click to collapse
Use the latest version of odin. Also go into download mode before connecting to pc. Plase thank me if you found this useful.
I am struggling with something that I hope that someone can help me out with. I just bought a galaxy tab from a buddy of mine. It is a T mobile tab that has had the phone option added (euro firmware I believe). This isnt my first foray into android modding as I had a tmobile vibrant before. In an attempt to get the phone into a useable state, I installed clockwork mod from the marketplace and selected the tmobile galaxy tab option. It installed without issue. I attempted to reboot into recovery through clockwork mod but it stalled out. I then entered recovery using the power and volume up combo. This worked. I installed the update.zip (as was always the case with the vibrant). Now, my tab shows a picture of an android with a yellow triangle with an exclmation mark over his head. I have tried using odin to flash new firmware (odin shows a com port but will not get past the connection phase). I have tried flashing the p1_hidden.pit file (no luck). I am at a loss. Any help would be a god send at this point.. Thanks in advance!
Bet you didn't check to see if you had locked bootloaders, huh...
You would be best to reflash stock rom, the rom that the tab was shipped with. You also need to do a bit more reading, I've never used update.zip but went to "chooose zip file to install" as most chefs don't name their roms update.zip.
Good luck with fixing, there is a sticky in the developement thread. I always keep my stock rom handy though in case of accidents...
You are in the secondary bootloader mode so as long as ODIN recognises it you should be ok....
Good luck...
Thanks for the feedback. I was able to get the tab into download mode and flashed the euro firmware. The whole point to doing this was to flash the Tmobile modem (I really dont need to use the tab as a phone) and since the modem is a zip file, I figured I would need to do this from recovery. I may give the modem flasher a try and see if that works for me. Thanks again.
SO I TRIED TO ROOT A VERIZON GALAXY 7 TAB THROUGH ODIN, EVERYTHING FLASHED OK, BUT I NOTICED IT DIDN'T REBOOT. SO I UNPLUGED IT AND POWERED IT ON THE SAMSUNG LOGO CAME UP, GOT A BLACK SCREEN AND THEN THE FLASH COMES ON AND STAYS ON CONSTANT. I AM ABLE TO TO GO INTO DOWNLOAD MODE. BUT NOTHING I HAVE TRIED HAS WORKED. I HAVE SEARCHED FOR TWO DAYS NOW. I AM NOT SURE IF I HAVE THE WRONG FILES OR WHAT.
IT'S A VERIZON TAB IT WAS RUNNING 2.3.5 STOCK. IF SOMEONE COULD HELP OR SHOOT ME IN THE RIGHT DIRECTION IT WOULD BE APPRECIATED. THANKS FOR ALL TEH HARD WORK YOU GUYS DO HERE
Why are you SHOUTING????????????????????????????????????????????
With regards to your question, please dude use some common sense when asking for help.
Which rom did you use?
What instructions did you follow?
Which part did you get upto?
Have you tried flash again?
sorry i was at work we always use capitals. i was on the stock rom still, i was trying to flash cf-rootxx_oxa_jvs-v4.1-cwm3rfs.tar through odin. forget were we found it. used the stock pit file, tab went through flashed passed , but never rebooted, so now i am trying to flash the stock pit and tar file(wich i deleted and can't find again) but it won't comunicate with odin, it will go into townload mode only when the tab is plugged into a wall socket. i am gonna try and find the files again and see if it will take the flash. thanks again
please help
still stuck in no mans land cant find any solution
Hi everyone. I have a rooted Galaxy Note 1. I accidentally tried to update something (the phone said there was an Android update or something) and now my phone in stuck in a bootloop showing the Android logo. When I try to reset it (volume+home+power buttons) it goes to an Odin "Downloading..." screen and gets stuck on that.
I've seen some stuff about unbricking the phone using Odin to return to the original stock rom. But from what I can tell, there are different stock roms available depending on your Country Sales Code (CSC). So apparently I need to look in Kies for my CSC to know which rom to download, but Kies doesn't recognise the phone, I guess because it's bricked. I know the phone is from the UK, but I don't know what network it came from (I bought it second hand). All I know is that it is unlocked now.
I have CWM.zip, CWM-SuperSU-v0.87.zip, and franco.Kernel-r5.zip on the micro SD card from when I was rooting it ages ago. Do these have anything to do with fixing it?
Any ideas on where I go from here? Thanks for your help.
Which volume button did you press ? You need volume up + home + power to get into recovery.
You can flash any rom from any region using odin.
Same problem
Hey,
Thanks for helping me in advance...
I used the Custom ROM (( http://forum.xda-developers.com/showthread.php?t=1970626 )) Ultimate N7000 for a long time. However this build became more and more unstable the longer I used my phone.
So I decided to go back to STOCK.
So I followed this guide: http://forum.xda-developers.com/showthread.php?t=1424997
And everything went well (Odin didnt give any errors)
However after reboot... the problem began... I cant turn my phone on anymore.... It seems to be stuck in a bootloop....
How can I fix this?? please help me
Which rom did you flash? If you flashed JB, boot into recovery and wipe data. Then reboot.
Okay so my dad gave me his old Samsung Galaxy S GT-I9000. So I rooted it using the XXJVT rooting package. Once it was rooted I flashed Cyanogen Mod 11 on it and everything was good and jolly. This phone at the moment did NOT have a simcard. My mom said that we could a sim this weekend, my friend also told me that the people wont give you a sim if your phone looks rooted. ME being stupid decided to flash back to stock. I did using an old rooting package. Now my phone wont get passed the "Samsung Galaxy S GT-I9000" boot screen. I can access download mode and CWM but CWM doesnt seem to be working properly:/ Well I tried using recovery images and all that crap but nothing seems to be working it just stays on the screen for hours. So I need help, Im kinda a noob as, bricked my phone :/ Any help at all would be appreciated.
Cheers and thanks in advanced
HelplessBoy said:
Okay so my dad gave me his old Samsung Galaxy S GT-I9000. So I rooted it using the XXJVT rooting package. Once it was rooted I flashed Cyanogen Mod 11 on it and everything was good and jolly. This phone at the moment did NOT have a simcard. My mom said that we could a sim this weekend, my friend also told me that the people wont give you a sim if your phone looks rooted. ME being stupid decided to flash back to stock. I did using an old rooting package. Now my phone wont get passed the "Samsung Galaxy S GT-I9000" boot screen. I can access download mode and CWM but CWM doesnt seem to be working properly:/ Well I tried using recovery images and all that crap but nothing seems to be working it just stays on the screen for hours. So I need help, Im kinda a noob as, bricked my phone :/ Any help at all would be appreciated.
Cheers and thanks in advanced
Click to expand...
Click to collapse
Download the XXJVU firmware and flash it using Odin. Also use a 512 pit file and check re-partition.