[HELP] SPH-P100 Sprint Galaxy Tab - bricked? - Galaxy Tab Q&A, Help & Troubleshooting

Posting for a friend -
I have a SPH-P100 Sprint Galaxy Tab and I have been stuck @ the Samsung logo for a few days now. It seems to boot as normal (samsung animation and chime) then pulses the samsung logo for a while then eventually the pulsing just stops and sticks. I have flashed to every Sprint rom and kernel available and still no luck -_- but what I do know is that when I enter adb logcat while it is booting it shows all the apps i had on the stock ROM trying to start or install. I'm not sure how but all the games and apps are still there on the internal sd/nand or whatever it is called. All the 3rd party stuff i bought etc, please help my tab is stuck -_-.

I have the same Problem and my sprint tab stuck at the Samsung logo
what should i do ????
please help me .

So you can still get into download
mode? If so check the zypher Rom thread. It has the stock tab Rom without modem
Sent from my PC36100 using Tapatalk

We've tried zypher.. including the one w/o modem.

it is still not working

Not working
it is as dead as a nail (i am the friend btw) when it is booting in logcat i can see all my old apps which i think is stopping me from booting. i also get a Mismatch UID error.

it is still not working

Did u tick the repartition box?
Sent from my GT-P1000 using XDA App

quattr0 said:
Did u tick the repartition box?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
some roms I tick and some I did not tick

i have same problem
i try many roms
i think the device is dead
is there are any original rom for sph p-100 ?

Use ROM EA24
I have same problems, and i flashed some Roms from internet, but not luck, until i found Rom EA24 in this forums. Use this, and my galaxy likes new one.

Use the ea24 update and flash with Odin in download mode. Look in Dev section for link.
Sent from my SPH-P100 using XDA Premium App

Have tried flashing ea24 but still stuck on samsung logo...
Already 3 days cannot properly sleep...
Please help.... Any body have any other solution???

Search for the no modem DJ30 file in here. That's important. Flash it with ODIN in the PDA section. Do not flash anything else. That should fix any issues you have, I hope.
Here's the link http://www.multiupload.com/WDKOUJSM2G download that. No need to repartition, so make sure it's unchecked.
You can also try to get to the recovery either vol up or vol down + power and format the device.
Sent from my SPH-P100 using Tapatalk

shoman24v said:
Search for the no modem DJ30 file in here. That's important. Flash it with ODIN in the PDA section. Do not flash anything else. That should fix any issues you have, I hope.
Here's the link http://www.multiupload.com/WDKOUJSM2G download that. No need to repartition, so make sure it's unchecked.
You can also try to get to the recovery either vol up or vol down + power and format the device.
Sent from my SPH-P100 using Tapatalk
Click to expand...
Click to collapse
THANK YOU!!!. Reminder. the file in the multiupload link is in .rar format. you will need a .rar decompressor to get to it. I after countless hours finaly rooted,flash a clockworkmod recovery and flashed the rom that make my samsung sprint galaxy tab work again!!!!!!!!!!!!!!!!. once again, THANK YOU MUCH!!!!!!!!!!!!!

Help!
shoman24v said:
Search for the no modem DJ30 file in here. That's important. Flash it with ODIN in the PDA section. Do not flash anything else. That should fix any issues you have, I hope.
Here's the link http://www.multiupload.com/WDKOUJSM2G download that. No need to repartition, so make sure it's unchecked.
You can also try to get to the recovery either vol up or vol down + power and format the device.
Sent from my SPH-P100 using Tapatalk
Click to expand...
Click to collapse
Hi there, Is there any way I just can download this file? This link takes me to download the ilivid download (Crap) manager thing, but to no avail.
Any help with the file will be appreciated. Thank you.

Related

Galaxy Tab not booting, stuck at "GalaxyTab Samsung" boot screen

Hello,
I have flashed my Galaxy Tab with roto JMI, but it's stuck at the "GalaxyTab / Samsung" boot screen.
I can get into download mode with volume down and power, I can reflash it but in the end it does not boot.
What can i do?
loony
*bump* anybody?
Help please!!! I have the same problem!
I am still having this problem. I am wondering if there is any way how to debug whats happening at the Samsung logo screen. With adb the devices is not detected (it seems not to be detected at the usb controller).
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Hi, I have exactly the same problem.
After upgrade du JMI roto with odin 1.7 (all upload seems to be ok, repartition with p1 and pda file Roto-JMI-Full-v2 no error message) but the device hangs on samsung galaxy tab logo and don't boot.
In my case previous version was pda jj3/phone jid / scs jj2
rsmurdoch said:
What did you use to flash?
What files did you use?
Give all the info so people can help
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Same Problem
Im on the SPH-P100, I have the same issue I can access it in Adb the log shows it in stalling all of my old .apks but it never boots past the logo.I have re flashed also but no luck plz help if u can i can post the logcat here but it goes for hrs -_- I assume it loops the process.
loonyt said:
Device it GT-P1000 (German/European version)
Flashed with P1000OXAJM6
Click to expand...
Click to collapse
So, this one contains a bootloader (Sbl.bin). maybe thats the cause of the problem. Still, I wonder why it started in the first place and then after some reboots it gets stuck. I tried different Kernels with no luck. Maybe I should try to flash a new bootloader? However, that could brick the device forever.
Loonyt
loonyt said:
Device it GT-P1000 (German/European version)
Bought the device
Got a lot of restarts
Flashed with P1000OXAJM6
Device worked again for some days
Device not booting anymore
Tried reset with different methods (Touch screen, press power; Touch menu button and power button): Sometimes worked, sometimes not
Recently not booting anymore, no trick worked
Flashed Roto Roto-JMI-Full-v2.tar with P1_add_hidden.pit
Device still not starting
Flashed original firmware: GT-P1000_P1000XXJK5_P1000OXAJK5_P1000XXJK5_P1000XXJK5_XX_DBT.zip
Device not starting
Flashed ROTO with Heimdall again (before used Odin only): Device not booting
Thanks!
Click to expand...
Click to collapse
*bump* Can anybody help?
I have a very similar problem.
I flashed the [ROM] Roto JMI Pre-Rooted Firmware v2 [Feb 4, 2011], and got stuck on the Samsung Boot screen.
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Hopefully, someone knows what's going on. If not, I'm taking it back to my carrier, and asking them to fix it (assuming they'll fix it).
Maybe this will help for the bootloader.
Its a bootloader patch. Please read thru the thread. Hope it helps.
http://forum.xda-developers.com/showthread.php?t=888071
Sent from my GT-P1000 using Tapatalk
dlui1 said:
Now, I can't even get the Downloading mode to work. It opens fine, but Odin/Heimdall doessn't detect the Tab at all.
Click to expand...
Click to collapse
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Qsilver2001 said:
Dont get what you mean by that. You cant get it to download mode but your tab start up fine?
Download mode = press vol down + power pn button.
As for odin/heimdall doesnt detect the tab it could be usb port (some reports in android development thread) or could be usb drivers.
As i need to switch usb drivers when i need to flash my tab & my dell streak.
Hope it helps to start you off.
Sent from my GT-P1000 using Tapatalk
Click to expand...
Click to collapse
I meant that I can get into Download mode, with the Downloading logo, but doesn't get detected by Odin. And it stays stuck on the Samsung boot logo if turned on normally. Can't get into recovery either.
Before I flashed the Roto ROM, Odin was working perfectly fine. I've been flashing other kernels and ROMs before. But now, the USB doesn't even seem to get detected. It's like nothing is plugged in. Can't even choose to install/uninstall old/new drivers.
I dont think it's the USB port, as I've tried to connect to Odin on 3 different computers, trying every available port on each. It's looking like the USB connector is just dead or something.
My tabs mainboard was broken, it was replaced and now it works again.
Sent from my GT-P1000 using XDA App
Same problem here man. I CAN get in to download mode. Odin recognize it normally. I CAN download normally. Look likes everything is normal, but after update it restarts, but hangs on Galaxy Tab Samsung logo. I've tryed everything with different firmware, custom-roms, hacking things, but with no success.
Can someone please help me?
Same problem here. My tab is stuck at samsung galaxy logo and until now, no one could provide an answer.
I flashed some ROM from samfirmware that must of locked the bootloader (JMF). Then I tried to flash JM6, JMA, JMC, JMK, JJ4, JJ7, JM5, JJ1, JID and almost all ROTO's. with and without pit files using ODIN 1.7. I also tried a stock ROGERS ROM (that i downloaded from this forum) using Heimdall. The tab always boots to samsung galaxy tab logo. I've done alot of reading in this forum and followed many flashing instructions but when applied, it doesn't work for me.
My main concern: is there still hope with the tab ? or it's gone forever.
Is there any specific order that i must follow when flashing ? ( ie, flash one specific ROM before another). The tab was canadian that was flashed to euro.
Thanks for reading my post.
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
handfree said:
the dbdata file is corrupted.
1) download this file
http://forum.xda-dev...98&d=1290261479
2) extract it
3) use Odin to flash it under the PDA option
-make sure repartition is UNCHECKED
-do not select any pit file
-leave everything else the same
Click to expand...
Click to collapse
Same prob. tab reboots to samsung logo.
Same Here, I tried many combinations with the help of experts on this board. Conclusion: shipped to Sammy for warranty repair.

[Q] Brick(death) before gingerbread,now in assisted coma

Hello,
guys i need your help...one week ago my european unbranded tab suddlenty died after repartitioned with wrong pit and flash with jmk (only download mode and samsung logo) Now,i try the new gingerbread with bootloaders, odin done his job,now i have is coming into recovery but new things come up....
E:Error in/cache/recovery/sec_cscs.zip (status 7) Instalation aborded (this after odin finish and restart)...
I put in recovery and is coming E:cant open directory/system/app/ (no such file or directory) copy applications failed
wipe cache- E:format_volume:rfs format failed on/dev/block/stl11
cache wipe complete
wipe date- the same as above but /mncblkop2
/stl10
/stl11
Do you thing we can revive this device?
Sorry for my english and thank you for speding time to reading this
It looks like you have a signed bootloader.
I could revive my tab as followed:
Go to http://www.samfirmware.com/ download the JJ4 firmware, flash that firmware, including rom, modem & CSC with partition on.
Your Tab will probably come to life then.
Then you can upgrade from there on, if you like.
I hope this will work for you too.
have the same problem (P1000, neverlocked)
JJ4 is one i didnt try ... would have a look, hope it would work
tried until now
P1000XWJMI
P1000XWJMK
P1000XXJHA
P1000XXJI2
P1000XXJI4
P1000XXJK5
P1000XXJMA
P1000XXJME
but no one of these helped. Some only let me use the DL mode, others would reactivate the soft buttons, but no chance for get a Android boot :/
pong
dap,jj4 not working i mean odin succes but no bootloding or recovery
Frantech.
Just follow what rwa66 said, I had exacly the same issue and he helped me getting my tab up and running:
1- Download and flash JJ4
Your tab might be still stuck on the boot logo. Just turn it off, then go to download.
2 Flash GB 2.3.3 (following Chainfire instructions ) and your tab will boot normally.
Sent from my GT-P1000 using XDA Premium App
Pong0820,
JJ4 is a full ROM it should resolve the csc errors. Even if your tab doesn't boot or gets stuck on boot, flash again GB 2.3.3
Good luck
Sent from my GT-P1000 using XDA Premium App
doing now,thanks tupo05
frantech said:
doing now,thanks tupo05
Click to expand...
Click to collapse
Good luck. I hope your tab will be up and running again.
Sent from my GT-P1000 using XDA Premium App
incredible!!!!!!!!!! my tab is back!!!!!! with ginger,f..k!!!
the trick,i believe,is after odin is finish to flash ginger is to to put direcly in download mode (without loading) to flash adbdata.....thank you tupo5 and to all wonderful team
frantech said:
incredible!!!!!!!!!! my tab is back!!!!!! with ginger,f..k!!!
the trick,i believe,is after odin is finish to flash ginger is to to put direcly in download mode (without loading) to flash adbdata.....thank you tupo5 and to all wonderful team
Click to expand...
Click to collapse
Congrats man. Welcome back lol
Sent from my GT-P1000 using XDA Premium App
youre really incredible ... nothing else to add. feel squeezed and kissed
pong
Good to hear Pong. Enjoy your GB 2.3.3
Sent from my GT-P1000 using XDA Premium App
i have same error..
i have a samsung galaxy tab verizon cdma. sch-i800.
but in 99% stop in MOVINAND... not show error...
i have disconnect manualy. and show this error...
help me please !
man,really i dont know much about verizon,t-mobil,i have european tab...but about movinant failed because you use wrong pit with that rom you flash(maybe i am wrong but it happend to me)
I'm in a similar situation. Battery ran out during Odin process. Now it won't acknowledge the Tab when plugged in. I've put it on charge but still nothing. Is there any way I can solve this?
leave odin on,your tab conected and wait for odin to find yout tab(minutes,hours)
try first with wall charger few hours.....and then follow instructions on this topic or whatever you want to do
thanks frantech.
The issue is that my screen is completely blank. Can't get it even in to download mode. No combination of buttons does anything and connecting it to the computer doesn't even trigger that a usb device has been connected.
Is the only option to just leave it there with Odin?
IT IS WORKED!!! How AMAZING it is!!
OMG DUDE IT IS REALLY WORKED!!!
I got almost same bricked situation of my SGT!!!
Once i really think my GT have to send back to samsung...... but i have the last try of you guys' suggestion, IT IS WORKED!!!
IT IS SO AMAZING N UNBELIEVABLE!!!
Thanks alot dude!!! You save my SGT!!! n my pocket!!! Thanks~
Now my SGT has reborn from deadly bricked!!
Every1 got such problem can try this solution~

Bricked Galaxy Tab?

So I tried getting into recovery via ROM Manager, and the tab just stopped operating. Now I'm stuck at the Samsung logo.
So far I've tried reflashing to stock firmware with Odin via Download mode, but no luck. The thing still sits on the Samsung logo.
I don't know if this is apart of the soft-brick symptoms, but everytime I plug it in to charge, I get a white screen instead of the usual battery icon.
Please advise! I don't mind running through the steps again! Any advise would be appreciated!
first, do you own a Verizon/Sprint/Latin America?
If yes, check the files and use the correct firmware and kernel.
If you own a unlocked Galaxy Tab flash the stock gingerbread. You can find it in the download section
in overcome page (p1000.teamovercome.com)
I currently own the T-Mobile version, p1000. I just saw the teamovercome page. I'll try it again through their instructions. Fingers crossed!
Thanks for the reply!!
If you can not into download mode there is a way to fix it. Download mode shows the triangle with android digging.
Sent from my GT-P1000 using XDA App
I think you need to flash a new kernel. The times I have been stock at samsung logo on the tab it was a kernel issue. Hopefully you can find the kernel that goes with your rom...if you can odin is your friend. You are not dead yet.
Sent from my SPH-D710 using XDA App
Hello,
did you get your GalTab back? I have that(?), a very similar(?) problem too... so I'm interessed in a solution...
Thanks!

[Q] Help: Flashed the bootloader of my Samsung Galaxy Tab P1000 with the wrong binary

I have a Samsung Galaxy Tab GT-P1000. Using Odin3 v3.04 I (accidently) flashed the Bootloader with the wrong binary. With the Auto-Reboot option selected on the Odin3, the device turned off and is not turning on again.
Before flashing, my Tab had the official Samsung GB 2.3.3 (P1000JPJPC if I am not mistaken).
Some threads suggest that I charge the Tab using the wall charger for 4 hours, and see if the battery icon appears on the screen or not, then connect the tab to the PC. I did that. I connected the Tab to the wall charger overnight. Nothing appeared on the screen. Then the next morning I connected the Tab to the PC, nothing happened. The PC does not recognize that there is anything connected on its USB port.
The Tab is not turning on. I've tried to press (and long press) almost every combination of the Tab's keys I could think of, but the Tab just won't turn on.
I guess I hardbricked my device (as explained in this thread)
I don't think I'll be able to apply the Unbrickable process explained here.
Having said that, my question is: Is there anything else I can do at home to revive my Tab, or do I need to send it to Samsung repair center?
-Adel
I think you brick it.
Flashing bad boot loader kills the tab.
Sent from my GT-I9300 using xda app-developers app
You can also send it to mobiletechvideos.com.
priyana said:
I think you brick it.
Flashing bad boot loader kills the tab.
Sent from my GT-I9300 using xda app-developers app
Click to expand...
Click to collapse
If you've completely killed your tab, what can be done to fix it. I have a similar problem with my tab in that it gets to the screen that says samsung galaxy tab and then stops there. I have been searching the net and have rooted the tab and then tried to flash firmware but i am struggling to get the tab to read the ext sd card with the firmware on it.I don't really know my way around this type f thing but have to figure it out because I can't afford to take it in to be repaired right now. Advise will be appreciated.
G
komplotter said:
If you've completely killed your tab, what can be done to fix it. I have a similar problem with my tab in that it gets to the screen that says samsung galaxy tab and then stops there. I have been searching the net and have rooted the tab and then tried to flash firmware but i am struggling to get the tab to read the ext sd card with the firmware on it.I don't really know my way around this type f thing but have to figure it out because I can't afford to take it in to be repaired right now. Advise will be appreciated.
G
Click to expand...
Click to collapse
Your problem is different from OP.
Can you boot to download mode? Can you boot to recovery, if so which recovery (stock or cwm).
Ave you tried Overcome method , as in my signature?
Sent from my GT-P1000 using xda app-developers app
priyana said:
Your problem is different from OP.
Can you boot to download mode? Can you boot to recovery, if so which recovery (stock or cwm).
Ave you tried Overcome method , as in my signature?
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi Priyana,
Thanks for your reply. Yes, as far I could tell from reading up on it, I would guess mine is not bricked.
I can boot to download mode and to recovery - cwm (v3.0.0.5). I have tried downloading Overcome and anything else I thought might work but this is where I get stuck. I've wiped the cache and other things like that described on the net and on videos (actually this is what got me into this in the first place). When I copy a .zip file onto the external sd card and put it in the tab, I can't install the zip from the sd card because it can't find the directory I made. I'll have a look in your signature and see what I can find there but any guidance would be much appreciated.
Komplotter,
Yeah, I am not sure about cwm 3.0 accessing external SD.
Try using overcome restock, jump to page 7 PDF.
Flash stock, then overcome kernel.
That gives cwm 5.0
Sent from my GT-P1000 using xda app-developers app
priyana said:
Komplotter,
Yeah, I am not sure about cwm 3.0 accessing external SD.
Try using overcome restock, jump to page 7 PDF.
Flash stock, then overcome kernel.
That gives cwm 5.0
Sent from my GT-P1000 using xda app-developers app
Click to expand...
Click to collapse
Hi,
I managed to get CWM 5.5.0.4 and get ICS installed in my tab by using two files (CF-Root-TAB7_XX_OXA_JQ1-v3.3-CWM3RFS and P1000XXJQ1_P1000XXJQ1_P1000XXJPZ). I would still like to use Overcome and I have had a brief look at the installation guide. I'll have a more thorough look and then give it a shot. I see that there is a version 4.1.0. Would I use that in that same way as the 4.0.0 ROM, because the Overcome7_ROMv4_Wipe file won't extract (there seems to be a problem with it and I've downloaded it twice).
You don't need the overcome ROM.
Just GB stock safe and overcome kernel.
Sent from my GT-P1000 using xda app-developers app

[Q] My device is boot looped, reflashing doesn't work

So I had baked rom 4.2.2, tried to flash back to 2.3.6 It did the flashing process but My phone gets stuck at the samsung logo.
I've tried tutorials and reflashing with no luck
Please help
Perhaps an idea to let us know if you have an Samsung Galaxy S (I9000) or Samsung Galaxy S Plus (I9001)
Download a file called dbsdata.rfs.tar
Doesn't matter whether you're an S or an S+ I believe (but please someone clarify)
EDIT: http://forum.xda-developers.com/showthread.php?t=2149455 Take a look here, download given
Put the phone into download mode, connect it to PC and open Odin
Then under PDA select dbadata.rfs.tar
Let it flash in
Sent from my GT-P7510 using Tapatalk HD
Soryuu said:
Download a file called dbsdata.rfs.tar
Doesn't matter whether you're an S or an S+ I believe (but please someone clarify)
EDIT: http://forum.xda-developers.com/showthread.php?t=2149455 Take a look here, download given
Put the phone into download mode, connect it to PC and open Odin
Then under PDA select dbadata.rfs.tar
Let it flash in
Sent from my GT-P7510 using Tapatalk HD
Click to expand...
Click to collapse
Thank you!

Categories

Resources