Related
Posting for a friend -
I have a SPH-P100 Sprint Galaxy Tab and I have been stuck @ the Samsung logo for a few days now. It seems to boot as normal (samsung animation and chime) then pulses the samsung logo for a while then eventually the pulsing just stops and sticks. I have flashed to every Sprint rom and kernel available and still no luck -_- but what I do know is that when I enter adb logcat while it is booting it shows all the apps i had on the stock ROM trying to start or install. I'm not sure how but all the games and apps are still there on the internal sd/nand or whatever it is called. All the 3rd party stuff i bought etc, please help my tab is stuck -_-.
I have the same Problem and my sprint tab stuck at the Samsung logo
what should i do ????
please help me .
So you can still get into download
mode? If so check the zypher Rom thread. It has the stock tab Rom without modem
Sent from my PC36100 using Tapatalk
We've tried zypher.. including the one w/o modem.
it is still not working
Not working
it is as dead as a nail (i am the friend btw) when it is booting in logcat i can see all my old apps which i think is stopping me from booting. i also get a Mismatch UID error.
it is still not working
Did u tick the repartition box?
Sent from my GT-P1000 using XDA App
quattr0 said:
Did u tick the repartition box?
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
some roms I tick and some I did not tick
i have same problem
i try many roms
i think the device is dead
is there are any original rom for sph p-100 ?
Use ROM EA24
I have same problems, and i flashed some Roms from internet, but not luck, until i found Rom EA24 in this forums. Use this, and my galaxy likes new one.
Use the ea24 update and flash with Odin in download mode. Look in Dev section for link.
Sent from my SPH-P100 using XDA Premium App
Have tried flashing ea24 but still stuck on samsung logo...
Already 3 days cannot properly sleep...
Please help.... Any body have any other solution???
Search for the no modem DJ30 file in here. That's important. Flash it with ODIN in the PDA section. Do not flash anything else. That should fix any issues you have, I hope.
Here's the link http://www.multiupload.com/WDKOUJSM2G download that. No need to repartition, so make sure it's unchecked.
You can also try to get to the recovery either vol up or vol down + power and format the device.
Sent from my SPH-P100 using Tapatalk
shoman24v said:
Search for the no modem DJ30 file in here. That's important. Flash it with ODIN in the PDA section. Do not flash anything else. That should fix any issues you have, I hope.
Here's the link http://www.multiupload.com/WDKOUJSM2G download that. No need to repartition, so make sure it's unchecked.
You can also try to get to the recovery either vol up or vol down + power and format the device.
Sent from my SPH-P100 using Tapatalk
Click to expand...
Click to collapse
THANK YOU!!!. Reminder. the file in the multiupload link is in .rar format. you will need a .rar decompressor to get to it. I after countless hours finaly rooted,flash a clockworkmod recovery and flashed the rom that make my samsung sprint galaxy tab work again!!!!!!!!!!!!!!!!. once again, THANK YOU MUCH!!!!!!!!!!!!!
Help!
shoman24v said:
Search for the no modem DJ30 file in here. That's important. Flash it with ODIN in the PDA section. Do not flash anything else. That should fix any issues you have, I hope.
Here's the link http://www.multiupload.com/WDKOUJSM2G download that. No need to repartition, so make sure it's unchecked.
You can also try to get to the recovery either vol up or vol down + power and format the device.
Sent from my SPH-P100 using Tapatalk
Click to expand...
Click to collapse
Hi there, Is there any way I just can download this file? This link takes me to download the ilivid download (Crap) manager thing, but to no avail.
Any help with the file will be appreciated. Thank you.
Hello,
guys i need your help...one week ago my european unbranded tab suddlenty died after repartitioned with wrong pit and flash with jmk (only download mode and samsung logo) Now,i try the new gingerbread with bootloaders, odin done his job,now i have is coming into recovery but new things come up....
E:Error in/cache/recovery/sec_cscs.zip (status 7) Instalation aborded (this after odin finish and restart)...
I put in recovery and is coming E:cant open directory/system/app/ (no such file or directory) copy applications failed
wipe cache- E:format_volume:rfs format failed on/dev/block/stl11
cache wipe complete
wipe date- the same as above but /mncblkop2
/stl10
/stl11
Do you thing we can revive this device?
Sorry for my english and thank you for speding time to reading this
It looks like you have a signed bootloader.
I could revive my tab as followed:
Go to http://www.samfirmware.com/ download the JJ4 firmware, flash that firmware, including rom, modem & CSC with partition on.
Your Tab will probably come to life then.
Then you can upgrade from there on, if you like.
I hope this will work for you too.
have the same problem (P1000, neverlocked)
JJ4 is one i didnt try ... would have a look, hope it would work
tried until now
P1000XWJMI
P1000XWJMK
P1000XXJHA
P1000XXJI2
P1000XXJI4
P1000XXJK5
P1000XXJMA
P1000XXJME
but no one of these helped. Some only let me use the DL mode, others would reactivate the soft buttons, but no chance for get a Android boot :/
pong
dap,jj4 not working i mean odin succes but no bootloding or recovery
Frantech.
Just follow what rwa66 said, I had exacly the same issue and he helped me getting my tab up and running:
1- Download and flash JJ4
Your tab might be still stuck on the boot logo. Just turn it off, then go to download.
2 Flash GB 2.3.3 (following Chainfire instructions ) and your tab will boot normally.
Sent from my GT-P1000 using XDA Premium App
Pong0820,
JJ4 is a full ROM it should resolve the csc errors. Even if your tab doesn't boot or gets stuck on boot, flash again GB 2.3.3
Good luck
Sent from my GT-P1000 using XDA Premium App
doing now,thanks tupo05
frantech said:
doing now,thanks tupo05
Click to expand...
Click to collapse
Good luck. I hope your tab will be up and running again.
Sent from my GT-P1000 using XDA Premium App
incredible!!!!!!!!!! my tab is back!!!!!! with ginger,f..k!!!
the trick,i believe,is after odin is finish to flash ginger is to to put direcly in download mode (without loading) to flash adbdata.....thank you tupo5 and to all wonderful team
frantech said:
incredible!!!!!!!!!! my tab is back!!!!!! with ginger,f..k!!!
the trick,i believe,is after odin is finish to flash ginger is to to put direcly in download mode (without loading) to flash adbdata.....thank you tupo5 and to all wonderful team
Click to expand...
Click to collapse
Congrats man. Welcome back lol
Sent from my GT-P1000 using XDA Premium App
youre really incredible ... nothing else to add. feel squeezed and kissed
pong
Good to hear Pong. Enjoy your GB 2.3.3
Sent from my GT-P1000 using XDA Premium App
i have same error..
i have a samsung galaxy tab verizon cdma. sch-i800.
but in 99% stop in MOVINAND... not show error...
i have disconnect manualy. and show this error...
help me please !
man,really i dont know much about verizon,t-mobil,i have european tab...but about movinant failed because you use wrong pit with that rom you flash(maybe i am wrong but it happend to me)
I'm in a similar situation. Battery ran out during Odin process. Now it won't acknowledge the Tab when plugged in. I've put it on charge but still nothing. Is there any way I can solve this?
leave odin on,your tab conected and wait for odin to find yout tab(minutes,hours)
try first with wall charger few hours.....and then follow instructions on this topic or whatever you want to do
thanks frantech.
The issue is that my screen is completely blank. Can't get it even in to download mode. No combination of buttons does anything and connecting it to the computer doesn't even trigger that a usb device has been connected.
Is the only option to just leave it there with Odin?
IT IS WORKED!!! How AMAZING it is!!
OMG DUDE IT IS REALLY WORKED!!!
I got almost same bricked situation of my SGT!!!
Once i really think my GT have to send back to samsung...... but i have the last try of you guys' suggestion, IT IS WORKED!!!
IT IS SO AMAZING N UNBELIEVABLE!!!
Thanks alot dude!!! You save my SGT!!! n my pocket!!! Thanks~
Now my SGT has reborn from deadly bricked!!
Every1 got such problem can try this solution~
hi i have a Samsung Tab P1000 and now its not powering on after i forced to switch off from downloading mode,because I'm trying to update from Froyo 2.2 to gingerbread 2.3.3 but after following the instruction from opening the odin, putting the pit file and PDA file and i click the start its only showing the setupconnection.......please help me.....thank you
did you try to charge it? If not do that and flash again.
yes....i tried to put in charge and it showing like this in the photo but if i remove from tha charger i cannot powering on and the icon will disappear.....
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Samsung gtp 1000
cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
hi guy i ve the same problem, pls i just need to know if is an hard brick or just a soft.
I ve read many trhead on forum and i ve seen that if is hard brick i must use resurrection program but i cant find no link.
pls some one can post me? tnx
cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
That diagram you had is the same thing as the download mode. So treat it as such and flash your rom and kernel normally and it should work. I had the same problem before. To be sure, tried the following thread. Go to the 3rd post in this thread and follow the installation instruction. It will work. http://forum.xda-developers.com/showthread.php?t=1382055
I get that every now and then too. I reinstall the drivers (included with Kies), and reboot the computer. After that it will work.
Froyo to Gingerbread -- Please be extra careful when flashing
cabansagarchie27 said:
i tried to flash again may tab using the odin it showing pass but its not continue to reboot......now its totally off
Click to expand...
Click to collapse
Does ODIN still recognize your Tab? If you are upgrading from froyo to gingerbread, you may need to load new PIT file as well as new dbdata.rfs.
If ODIN still recognize your Tab, try to download your choice of firmware again with PIT file included. I'll attach a working PIT for you.
Note: Please extract the attached file to get the .PIT file and put it on PIT field on ODIN along with your choice of firmware you are flashing.
Once you are done and reboot, mostlikely you'll be in a boot-loop stuck at SAMSUNG screen. Now reboot to download mode again, then flash the DBDATA.rfs.tar I attached on the following post in PDA field on ODIN:
http://forum.xda-developers.com/showpost.php?p=23348040&postcount=121
i dont have the icon
wakak make sure you got the proper Samsung driver installed!
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
dana25 said:
After installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
RubenStauttener said:
I think you have a hard brick.....
Maybe JIG / JTAG can help.
Sent from my GT-S5830i using xda premium
Click to expand...
Click to collapse
would you provide me with that or tell me how?
dana25 said:
Hi,
could anyone help!
my device is galaxy ace s5830i
i have already rooted my device and used CW Recovery and taken a copy of my original system .oki
i wanted to set up a custom rom i restarted and reset and deleted the cash then installed the rom.
i think it was Retribution beta
then i wanted to update to that custom rom (MindCR ICS)
all i did i restarted my phone of course went into R mode and reset and deleted the cash then installed that next custom rom .
after installing completed when i rebooted it only gave me (samsung galaxy ace s5830i) logo and doesn't open the system when i restart it doesn't go into recovery or download mode it only gives me again the same logo.
even when i press long power button it shuts down and opens automatically.
is there any help knowing that i have already taken a copy of my system.
Click to expand...
Click to collapse
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Viprdxd said:
I have this problem before and i managed to use ODIN3 v1.83 (can use Odin3 v3.07) to detect my phone and flash a stock rom onto the device. I followed the advice given on this excellent thread by Supermini.
http://forum.xda-developers.com/showthread.php?t=1071970
As mentioned on his thread make sure you have the latest stock firmware from the sammobile site or by using Check Fus Downloader as per the guide in Rafael thread http://forum.xda-developers.com/showthread.php?t=1551156, a working samsung USB driver to detect your mobile on your PC and a copy of ODIN3 v1.83 (or v1.84, v1.87, v3.07 run ODIN in administrator mode if using in windows). Ultimately if this this fails you could always try a USB jig which can be purchased from ebay, etc. to get the phone into download mode.
Good luck and if this helps make sure you send a thank you to Supermini.
Click to expand...
Click to collapse
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
bro i think u most probably bricked ur phone but dont worry try opening download mode. then using the odin u install ur stock rom. Then u can access ur r mode. but try to read the entire procedure..of flashing the rom.
dana25 said:
thanks and sorry for late but as i told you i cant go into rev or download mode i tried to use odin 1.8 and the latest version but it doesn't recognize my phone shall i lose hope!
Click to expand...
Click to collapse
So . . . last thing to rescue your phone is buy on e-bay or in other place JIG if it isn't help you then try in phone service and say you tried install new ROM with Kies and your phone is brick (maybe it'll work).
Say to Service Centre Representatives that you kept your at charging last night
And when you woke up
It was not booting up
Pretend as if you dunno anything about root or ROM
They fixed my bricked phone
I am not sure if I am breaking any forum rule by telling this
Hey bro sorry for the late reply also, please before you do anything else try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Please keep us updated so we can help you if you need it.
Sent from my Nexus 7 using xda app-developers app
Why will it be hardbricked if the custom roms are based on s5830i stock roms?
But it is probable that we did I not flash the rom properly as per procedure..so is there a chance that it be bricked? Else the rom may have some problem... just telling the probability
Sent from my GT-S5830i using xda premium
Help me .
help me on fixing my ace s5830i , my problem is after flashing it with RazoDroiD my phone seems to be ok , i decided to change my firmware by a stockrom using Odin mode or the Volume Up+Down+On off it stays on blank screen . Can you help me on fixing this ? and what do you call this problem .
Try following my instructions.
1) download Odin v3.07
2) source the stock firmware you want to flash from sammobile.
3) make sure you have the Samsung mobile driver.
4) open and run Odin as administrator and load the single file in the PDA and highlight the tick box.
5) shut the phone down and take out your Sim card.
6) put the mobile into download mode as normal (press both up/down vol keys +power)
7) connect the phone to the PC and check in Odin to make sure its com port is detected.
8) then flash through Odin as normal.
I understand what your saying about no download screen appearing, I have found through experience that custom kernels can cause no download screen to appear. Normally with stock kernel this is not a problem but with custom kernels sometimes all you get is a black screen. Ignore this and just make sure that Odin is detecting the phone and try to flash, chances are it will flash the stock ROM and kernel. If you get the setup connection error in Odin and the fail 0\1 just try another USB port on your PC and keep persevering.
Follow this and don't worry about black screen just make sure Odin detects your PC com port.
Sent from my Nexus 7 using xda app-developers app
i was trying to unlock the phone because i could not use my sim card.and now i cant turn in on.it don't go in download mode or anything other(the screen is always black) but luckily
the odin program recognize it but it always stuck on setup connection.what must i do???i've tried everything.
markoskag25 said:
i was trying to unlock the phone because i could not use my sim card.and now i cant turn in on.it don't go in download mode or anything other(the screen is always black) but luckily
the odin program recognize it but it always stuck on setup connection.what must i do???i've tried everything.
Click to expand...
Click to collapse
it used andoid 2.3.3
unbrick galaxy ace
hey markoskag25,
i had the nearly the same issue (stuck on setupconnection),
i first try with a rom containing 4 files (pda, csc, etc..) didnt work. then tried with a single file rom (one file gignerbread ) n then it worked, using odin 4.38 .
pakeejy said:
hey markoskag25,
i had the nearly the same issue (stuck on setupconnection),
i first try with a rom containing 4 files (pda, csc, etc..) didnt work. then tried with a single file rom (one file gignerbread ) n then it worked, using odin 4.38 .
Click to expand...
Click to collapse
can you send me the files of what i must done?im a noob in android mobiles
pakeejy said:
hey markoskag25,
i had the nearly the same issue (stuck on setupconnection),
i first try with a rom containing 4 files (pda, csc, etc..) didnt work. then tried with a single file rom (one file gignerbread ) n then it worked, using odin 4.38 .
Click to expand...
Click to collapse
it stuck again on setup connection
markoskag25 said:
i was trying to unlock the phone because i could not use my sim card.and now i cant turn in on.it don't go in download mode or anything other(the screen is always black) but luckily
the odin program recognize it but it always stuck on setup connection.what must i do???i've tried everything.
Click to expand...
Click to collapse
Goto Sammobile.com & register there choose the firmware according to your reigion.....then try to flash it via Odin....there are lots of videos in youtube about flashing ace via odin....
****It is moresafe to flash the firmware version which u had last
**** do at your own risk...im not responsible...:beer: the luck is still Odin recognize your phone!!!
*** use google & youtube for process!!
Sent from my GT-S5830 using xda app-developers app
Mayhem66 said:
Goto Sammobile.com & register there choose the firmware according to your reigion.....then try to flash it via Odin....there are lots of videos in youtube about flashing ace via odin....
****It is moresafe to flash the firmware version which u had last
**** do at your own risk...im not responsible...:beer: the luck is still Odin recognize your phone!!!
*** use google & youtube for process!!
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
i cant do it cause odin always stop an setup connection .:/ do you know what must i do???
Hi markoskag25!
Perhaps you could read this
"How to unbrick galaxy ace...WORKING 100%"
by pagadalachetan
You could also try doing your questions in Galaxy Ace S5830 Q&A
Good luck!
BajoPrimate said:
Hi markoskag25!
Perhaps you could read this
"How to unbrick galaxy ace...WORKING 100%"
by pagadalachetan
You could also try doing your questions in Galaxy Ace S5830 Q&A
Good luck!
Click to expand...
Click to collapse
thanks for the help but my phone cant boot in any mode :/
markoskag25 said:
thanks for the help but my phone cant boot in any mode :/
Click to expand...
Click to collapse
Hi markoskag25!
Prehaps in How to unbrick Samsung Galaxy Ace by SuperMini
you could find more possible solutions: removing the battery and putting again before odin... , with an usb jig ...
Anyway, good luck.
BajoPrimate said:
Hi markoskag25!
Prehaps in How to unbrick Samsung Galaxy Ace by SuperMini
you could find more possible solutions: removing the battery and putting again before odin... , with an usb jig ...
Anyway, good luck.
Click to expand...
Click to collapse
the usb jig dont work..:/
markoskag25 said:
the usb jig dont work..:/
Click to expand...
Click to collapse
MY phone is also in the same state now,
what did you do to make it work,
my phone got detected but hangs at setup connection in odin and no answer from phone in z3x,
please advice me on this,
thank you.