help bricked sgs (tried eeverything from various sources) - Galaxy S I9000 Q&A, Help & Troubleshooting

hi i have a samsung galaxy s i got it given and thought i could follow some guides to unbrick it, it turns on and goes too the samsung galaxy s screen and wont pass it then after a while turns off, if i plug it into comp or charger empty battery with a round thing in the middle comes on and thats about it no movement or anything, i couldnt get into download mode or recovery so i got my self a jig and then could get into download mode folloewed various guides using different rom/firmwares fro tese tutorials and odin says it was successfull but i still cant get past the galaxy screen, but i can now get into download mode now with out the juse of jig but still no luck passing the galaxy s screen, currently got I9000XWJM5 with pit 512. i cant get sdk to work too as my comp wont pick it up so i cant force it into recoery mode this way any help please or am i wastin my time on a proper brick
thanks nick

Hey bud, if you think of the galaxy s as a computer for a sec....you have the BIOS right? It sounds to me that your galaxy s "BIOS" is corrupt. Are you sure your flashing firmware correctly? Pit, PDA, modem/phone, csc, also make sure repartition is ticked too, go back to Froyo XXI9000JPU and let me know if you need help OK?
Sent from my GT-I9000 using XDA Premium App

thanks for tha, i tried I9000XXJPU ## 512.PIT 2.2.1 2010 December from the samfirmware site, i have been using Pit, PDA, modem/phone, csc, and ticked the repartition, it goes throught the motions then the phone resets hanging at the same point as before, and odin says successfull i got no idea now and been trawling through forums for two days . any help please .

nick_gibson said:
thanks for tha, i tried I9000XXJPU ## 512.PIT 2.2.1 2010 December from the samfirmware site, i have been using Pit, PDA, modem/phone, csc, and ticked the repartition, it goes throught the motions then the phone resets hanging at the same point as before, and odin says successfull i got no idea now and been trawling through forums for two days . any help please .
Click to expand...
Click to collapse
Go through the process again, but tick repartition and bootloader update. That should fix it bud
Sent from my GT-I9000 using XDA Premium App

tried it again and still no luck

nick_gibson said:
tried it again and still no luck
Click to expand...
Click to collapse
The best thing I can advise you to do then bud is send it off to Samsung, and blame it on kies, that's what I did and they fixed mine for free under warranty, sorry I couldn't be more help bud
Sent from my GT-I9000 using XDA Premium App

Before you do that try a Darky Odin rom. Some stock roms do not have all the right files (as you do not need them I think with kies and if not re partitioning). Worth a shot. Let us know the results.
also may want to try a wipe and format of the cache and data and db_data partitions from recovery (can you get to recovery?)
Usually you are not hard bricked if you can get to download mode. You may still have a screwed phone with a hardware failure (but not one like any I've seen described) but you're not bricked.
Edit: working on another thread here with a similar situation. Try another version of Odin (like EZ odin) I know I had one that just would not work.
G

thanks fr help but still no good and cnt get into recovery mode

hmmm.. try ezbase it should give u a clean install... http://forum.xda-developers.com/showthread.php?t=991792.. after install wait for atleast 20 mins first boot may take time..
hope it helps!!

still the same thanks 4 help so far

Related

[Q] Captivate Boot Loop after Odin one click

Hello all and thx in advance.
ATT Captivate batch 1010
I had Cognition 2.3 I think on my phone and it worked great however I wanted to try a different ROM so I attempted to restore my phone to stock using ODIN one click. I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Now I am stuck in a boot loop that either shows the white ATT logo screen flashing every couple seconds or the phone off charge screen re starting every couple seconds.
I bought a USB Jig and it works great so I can get into D/L mode easily but I have tried flashing the stock firmware at least 6 times now using different machines, different ports, different versions of ODIN and I've searched around these forums and others for several hours trying to find a solution. It seems that I needed to erase my user data in recovery mode and removed the lag fix before I did this but it is what it is. I have tried to get to recovery mode to no avail. All I can get to is download mode.
Any ideas on what I should/can do?
any help will be greatly appreciated.
Rob
Aircraft123 said:
I realized after that that I never disabled the voodoo lag fix or deleted my user data.
Click to expand...
Click to collapse
Neither are necessary for Odin use.
ATT Captivate batch 1010
Click to expand...
Click to collapse
I think that you may need to use the Froyo Odin (JI6).
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36
CM7
please help, i have the same problem, was flashing back to stock from a serendipit 5.12 so that i could get the 6.0 version... all went as planned until odin said "reset" which was my cue to unplug and that the process was complete.... i unplugged the phone and tried to reboot and now it does exactly as the first post described, at&t logo then black screen, then back to the at&t logo then black screen again... my computer doesnt recognize my phone none of the methods of getting to download screen will work... no matter how many times i pull the sd, sim, and batt, no matter the button combination i use or which order i use them in.... same result... i cant afford a new phone i need help, i will donate also... i knew this stuff was over my head, but "curiosity killed the cat" i guess...
I had the exact same problem. Try this method, it's the one that worked for me when all others failed... But remember to follow it EXACTLY.
1. Pull out the battery.
2. Hold Volume UP+DOWN (Don't let go of them until you see the download screen).
3. Stick in the USB (which is connected to the computer).
4. Put the battery back in.
If not, you might need to get a USB Jig.
That Froyo Odin link worked!
Thanks guys I flashed to Froyo and it worked!
I've since flashed clockwork recovery and gotten Serendipity 6.1
As far as getting into download mode I had to use one of the USB jigs.
I ordered one from the guy who does the rom reviews but you could make one as well.
On another note the new ROM seems to be discharging my battery really fast
Before I start investigating it as a problem I am going to charge it completely then let it discharge completely to calibrate it.
Thanks again guys
Rob
I just fixed mine last night, I had the exact same problem because of the exact same upgrade. What you need to do is get or make a usb jig. There's a couple resources around here for how to do it.
Here's a video showing how to make one:
http://www.youtube.com/watch?v=Rdn5GoRjhn0
Once I got my phone into download mode, I used Darky's ROM Resurrection Edition ( http://forum.xda-developers.com/showthread.php?t=940671 ) to restore my phone. Just scroll down to where it says "Files Needed" and download the Captivate version. Once you have that downloaded, use the jig to put your phone into download mode and follow the directions in the Darky's video (jump to about 2:30 into the video). Once I had my phone booting, I used clockwork to install Serendipity 6.
Hope that helps you as much as it helped me!!
went to radio shack, got all the stuff to make a jig and i was able to get my phone into download mode! now to try darko...... thanks everyone!
odin doesnt reconize phone
which odin3 are you using? 1.7? or the one click to stock?
you mentioned you had the bootloop problem before, so you should be using odin 1.7 with 2.2 stock.
open odin
get phone into download mode with your nice jig
unplug jig and plug in computer
box in odin should turn yellow.
And make sure you have the correct drivers installed. CRUCIAL.
Multiupload links not working
I'm stuck in the same situation as the OP.
I've been trying to use the method mentioned in the quote below, but the multiupload links are not working for me. I've been trying for 2 days to get to these files.
Breakin' Ranh said:
**Another thing, read the whole thing before doing it! If you're not confident whatsoever about this process, don't do it**
1. Download the following:
I897UCJH2 Firmware
password: samsung-firmwares.com
http://www.multiupload.com/B5OFPPOJFZ
512 PIT
http://www.multiupload.com/I5WICSBFJ1
ODIN3
http://www.multiupload.com/DLS7TWUVPY
Click to expand...
Click to collapse
Here's a link to the thread for more clarification:
http://forum.xda-developers.com/showpost.php?p=10056254&postcount=36I've
Would anyone happen to have these files and be willing to share them?
^
Have u tried the Odin or Heimdall One Clicks in the development stickied thread ??
Sent by XDA Premium App
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
lllll Nova lllll said:
Yep, tried the Odin one click - caught in a boot loop with the AT&T Logo. I have yet to try the Heimdall one.
UPDATE
Tried Odin and Heimdall One-Clicks - unsuccessful. I'm think I will need the stock Eclair firmware file with Odin and the pit file.
Click to expand...
Click to collapse
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
ScruffMcG said:
You ever get this to work? - I'm in a similar situation. all flashes 'work' but get stuck at ATT on boot. Not sure Eclair is an option or not since mine is a refurbished phone that started on 2.2
Click to expand...
Click to collapse
If one-clicks aren't working, you might need to grab the full version of Heimdall or Odin and flash a full package. Some of the newer phone builds don't like one-clicks.
^ +1
See this thread...the original Stock i897ucKK4 thread... http://forum.xda-developers.com/showthread.php?p=19587108
Then see post #57 for the regular Odin to use and instructions on what to do with the firmware.
Sent from my SAMSUNG-SGH-I777 using xda premium

[Q] Brick(death) before gingerbread,now in assisted coma

Hello,
guys i need your help...one week ago my european unbranded tab suddlenty died after repartitioned with wrong pit and flash with jmk (only download mode and samsung logo) Now,i try the new gingerbread with bootloaders, odin done his job,now i have is coming into recovery but new things come up....
E:Error in/cache/recovery/sec_cscs.zip (status 7) Instalation aborded (this after odin finish and restart)...
I put in recovery and is coming E:cant open directory/system/app/ (no such file or directory) copy applications failed
wipe cache- E:format_volume:rfs format failed on/dev/block/stl11
cache wipe complete
wipe date- the same as above but /mncblkop2
/stl10
/stl11
Do you thing we can revive this device?
Sorry for my english and thank you for speding time to reading this
It looks like you have a signed bootloader.
I could revive my tab as followed:
Go to http://www.samfirmware.com/ download the JJ4 firmware, flash that firmware, including rom, modem & CSC with partition on.
Your Tab will probably come to life then.
Then you can upgrade from there on, if you like.
I hope this will work for you too.
have the same problem (P1000, neverlocked)
JJ4 is one i didnt try ... would have a look, hope it would work
tried until now
P1000XWJMI
P1000XWJMK
P1000XXJHA
P1000XXJI2
P1000XXJI4
P1000XXJK5
P1000XXJMA
P1000XXJME
but no one of these helped. Some only let me use the DL mode, others would reactivate the soft buttons, but no chance for get a Android boot :/
pong
dap,jj4 not working i mean odin succes but no bootloding or recovery
Frantech.
Just follow what rwa66 said, I had exacly the same issue and he helped me getting my tab up and running:
1- Download and flash JJ4
Your tab might be still stuck on the boot logo. Just turn it off, then go to download.
2 Flash GB 2.3.3 (following Chainfire instructions ) and your tab will boot normally.
Sent from my GT-P1000 using XDA Premium App
Pong0820,
JJ4 is a full ROM it should resolve the csc errors. Even if your tab doesn't boot or gets stuck on boot, flash again GB 2.3.3
Good luck
Sent from my GT-P1000 using XDA Premium App
doing now,thanks tupo05
frantech said:
doing now,thanks tupo05
Click to expand...
Click to collapse
Good luck. I hope your tab will be up and running again.
Sent from my GT-P1000 using XDA Premium App
incredible!!!!!!!!!! my tab is back!!!!!! with ginger,f..k!!!
the trick,i believe,is after odin is finish to flash ginger is to to put direcly in download mode (without loading) to flash adbdata.....thank you tupo5 and to all wonderful team
frantech said:
incredible!!!!!!!!!! my tab is back!!!!!! with ginger,f..k!!!
the trick,i believe,is after odin is finish to flash ginger is to to put direcly in download mode (without loading) to flash adbdata.....thank you tupo5 and to all wonderful team
Click to expand...
Click to collapse
Congrats man. Welcome back lol
Sent from my GT-P1000 using XDA Premium App
youre really incredible ... nothing else to add. feel squeezed and kissed
pong
Good to hear Pong. Enjoy your GB 2.3.3
Sent from my GT-P1000 using XDA Premium App
i have same error..
i have a samsung galaxy tab verizon cdma. sch-i800.
but in 99% stop in MOVINAND... not show error...
i have disconnect manualy. and show this error...
help me please !
man,really i dont know much about verizon,t-mobil,i have european tab...but about movinant failed because you use wrong pit with that rom you flash(maybe i am wrong but it happend to me)
I'm in a similar situation. Battery ran out during Odin process. Now it won't acknowledge the Tab when plugged in. I've put it on charge but still nothing. Is there any way I can solve this?
leave odin on,your tab conected and wait for odin to find yout tab(minutes,hours)
try first with wall charger few hours.....and then follow instructions on this topic or whatever you want to do
thanks frantech.
The issue is that my screen is completely blank. Can't get it even in to download mode. No combination of buttons does anything and connecting it to the computer doesn't even trigger that a usb device has been connected.
Is the only option to just leave it there with Odin?
IT IS WORKED!!! How AMAZING it is!!
OMG DUDE IT IS REALLY WORKED!!!
I got almost same bricked situation of my SGT!!!
Once i really think my GT have to send back to samsung...... but i have the last try of you guys' suggestion, IT IS WORKED!!!
IT IS SO AMAZING N UNBELIEVABLE!!!
Thanks alot dude!!! You save my SGT!!! n my pocket!!! Thanks~
Now my SGT has reborn from deadly bricked!!
Every1 got such problem can try this solution~

[Q] GT-I900 stuck at boot

Hello people!
I have a problem with my Phone.. When I turn it on, i get that standard screen that says " Galaxy S GT-I9000 Samsung " And then it starts to vibrate 3 short times and then 1 longer time... And it keeps looping! I already got in the 3 button menu and tried everything but nothing works! (I can still enter the download menu) Can I fix this without reflashing?
Thanks!
Greetz
VivaLaPascal said:
Hello people!
I have a problem with my Phone.. When I turn it on, i get that standard screen that says " Galaxy S GT-I9000 Samsung " And then it starts to vibrate 3 short times and then 1 longer time... And it keeps looping! I already got in the 3 button menu and tried everything but nothing works! (I can still enter the download menu) Can I fix this without reflashing?
Thanks!
Greetz
Click to expand...
Click to collapse
No chance, reflash a clean version with Odin or Heimdall
Ok ! im now studying the tutorial of odin how to flash, so i think that it will work !
Bought my phone in Portugal so I9000XXJPO Firmware and a 803.PIT file would be ok right ?
Thanks by the way for the quick repsonding!
Update: I flashed my phone with this firmware and bitfile with Odin, it worked fine it said pass at the end... Now the phone rebooted and I got the start up screen and in the end the Glowing S, but now I have a black screen and vibrates irregulary, Does somebody knows if something went wrong ? Shall I reflash it?
Did you check the 're-partition' box when doing your flash ?
jc
If he chose pit "re-partition" was propably enabled
Wysłano z GT-I9000 z użyciem Tapatalk
Yes but sometimes whilst using Odin V1.3 when choosing pit it doesn't always tick itself automatically, thats why they usually tell you to check.
@VivaLaPascal, you should have taken it back to the carrier, as it sounds like this was an problem you did not cause, but nevermind now. Yes reflash the firmware and make sure re-partition is checked. If that doesn't work tell us what happened
BTW how sure are you of your firmware, because that is froyo firmware, did you not update to gingerbread through Kies or anything?
I already found the error, I had used the wrong Pit file . I went to samfirmware and it said that with I9000 XWJS5 I had to use a 803 pitfile. So I did it, in the end it was a 512 XD
Talon26 said:
@VivaLaPascal, you should have taken it back to the carrier, as it sounds like this was an problem you did not cause, but nevermind now. Yes reflash the firmware and make sure re-partition is checked. If that doesn't work tell us what happened
Click to expand...
Click to collapse
The phone was already illegally maked sim lock free/and rooted so I thought I could not bring it back .. The error occured after changing font by some crazy ass 5 * rated app named Jrummy's root toolbox XD I will never use it again! But everything is solved now, thanks for the help anyway!

Galaxy Note fails while booting (yellow triangle)

Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Can you exactly give the file name, which you have used to flash PDA section? and size of it
Titek said:
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Click to expand...
Click to collapse
1. It doesn't matter while flashing using PC Odin.
2. Are you sure about which ROM you flashed ( Suspecting you have flashed Custom ROM)
3. Their is way to remove Triangle (!) , you should use JIG
follow the link for more details.
http://forum.xda-developers.com/showthread.php?t=1354888
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
The file I could find using google was about 8Mo and the flash was quite fast.
(I used it for the PDA part)
I also referred to that thread :
(http://forum.xda-developers.com/showthread.php?t=1329360)
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: http://www.multiupload.com/YB9EL8D8O3
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
using the file for KKA, but then, next flashing, the yellow triangle...
I'm working right now but I can repost here in a few hours the exact name of the file I have found using google that I could not find over here.
Anyway, do you think I can "repair" it without any JIG USB?
And yes, it was on a custom rom (the phone is just new, only a few hours in my hands ) but it's not my first one (i could flash a HD2 and the Samsung Tablet with no problems...
Titek said:
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
Click to expand...
Click to collapse
This thing you did wrong, I have made lot effort to update Rooting guide here, still somebody How can find this guide i dont know.
Basically you have flashed with Netchip method, which was very first appeared, but later netchip also said, to not to use, b'coz it causing raise Flash counter
as well yellow triangle.
Now onwards remember, NEVER use PC ODIN to Flash Any Custome ROM/Kernel.
I am updating link here soon, how to reset your counter. You requires JIG for that
Edit : here is guide how to reset binaru count, n remove yellow triangle
http://forum.xda-developers.com/showthread.php?t=1354888
-------------------
BTW till you get JIG, just go to this thread http://forum.xda-developers.com/showthread.php?t=1424997 and download and flash ROM using PC odin(here it is stock ROM u can use it safely). you will get your phone working. later you can reset counter with JIG
Download my guide from here, how to update ROM, you can use Updating ROM with PC Odin section from guide.
Many thanks again, dr.ketan for such reply so fast
Hmmmm then I will have to wait for a JIG. I will order a JIG, it seems the price is not so expensive.
Thanks again for your comments and help, much appreciated
Ya jig is costing just 1-2 usd
Sent from my GT-N7000 using xda premium
dr.ketan said:
Ya jig is costing just 1-2 usd
Even you can make it at home, guide link is inside previous msg (how to use jig)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Titek said:
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Click to expand...
Click to collapse
See, JIG is required for totally different reason.
Your issue regarding, not connecting kies / Booting phone, won't be solved by JIG.
Jig can b use in two condition. One when you are unable to enter in download mode. I think, you dont have this issue
another To reset counter, for which you require JIG in your case.
Error you are facing right now during booting of device, can be solved by Reflashing ROM. You can flash any stock ROM with PC Odin, shud be enough to solve it.
Now regarding use of JIG, just enter in download mode, check Lt upper corner of devoce, it will have number of flash you have performed, i think in your case it must be 1 or more. which in normal case should be zero. Only To reset that counter, you needs Jig.
Thanks again.
Well, I download another stock rom but I got a "fail" (red color) above "id:com", when flashing on ODIN.
I am using Windows7 and tested the compatibility mode, the problem remains.
I have .md5 file that I put on PDA part. Then I click on Start but nothing, except the "fail" message.
When turning off the phone and on, I got the other message, said in my previous post :
"Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again."
So, Am I missing something.
About the download mode, the number is 7 in fact.
Oh I remember the file I wanted to flash via ODIN : netchip-cwm-update2.tar
It seemed to work just because the phone turned off and I got a "green" message that said that it was ok. (PASS).
I read one of your thread, when nothing works, so that man should go here :
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
but the file (link) is not working now, so I can not get the file to test :s
But since then, I can not boot on Android anymore...
Yes unfortunately link is down since 2 days
Ya thats i guessed when i read you have used superuser zip, i have said earlier in 1 msg, you have used netchip.
Anyway, once go to recovery (vol up +home+power)n wipe data, clear cache, clear dwlvic caxhe.
Then put phone in download mode. Close firewall/antivirus on pc, open odin, connect device with download mode(vol down+home+power), if id com glow yellow, thn proceed with start
Gudluck
Sent from my GT-N7000 using xda premium
The main problem is that, too.
I can not enter Recovery, I got the yellow triangle.
I can only go in download mode, and when turning off and on the phone, the message said above :s
is JIG the only way to solve all that?
is my phone "blocked"? I am trying to test another stock rom, I'll give it a try and let you guess what happens.
EDIT 22:37:
The flash with that rom (N7000XXLA4_N7000DREKL1_DRE) has failed, even if it is a stock one.
Can I try to use any other rom from another country? Before I tried to flash the rom, I saw it was a KKA. Can I try so with a LA3 or something else, still stock one?
Oh man, that's so bad....
I think I found the problem...
I am using Windows7 64 bits.
My wife is on WindowsXP and I am using Odin on her netbook, and it's quite better !
the flashing is going on.
Hey !!!! that's all good !!!!! ^^'
My Galaxy Notes is working again ^'^'
Maybe should it be mentionned to be careful when using Windows7 64 bits, if some other members would have the same problem when flashing their roms?
Congrates !
ya it is common problem(win7), many time it has been discussed , but it is not that everytime it not works, but it happens in few cases.
When reading your answer yesterday, I thought I might had a chance to make my Galaxy Note working again without JIG.
Now I've downloaded Samsung drivers, for Windows7 64 bits, and I can flash with no problem. I'm backing up and can use CWM
Thanks again for your help and answers
I had the same problem, but then I decided to use the ORIGINAL usb cable and see: it did the trick !!!. Even on Windows 10 64bit !.

Bricked + Stuck at download screen

Bricked + Stcuk at download screen
Hello guys,
So i created a really messy situation for me. I flashed a lot of ics rom's and was not happy with any of them so was trying to odin back to gb stock rom and flash my old gb custom rom but the odin on pc got stuck at "Getting pit details " and phone was at 1/10 the progress bar..it stuck there for abt 10mins and i decided it's not going anywhere and stuck so i pulled the cable and the phone was hard-bricked. it was not responding to anything. Surprisingly enough in morning i was able to get into download mode but now when i try to flash from odin it get's stuck at "Setup connection" and just stays there. Any Ideas ?
Edit: The phone gets detected in windows and drivers get installed but adb says unknown. or device not found for any commands that i try
Edit #2 :Flashed a Md5 i had and the phone booted into recovery giving all sorts of error E:/data not found and sorts. Not sure what i can do ahead. The odin all in one package get stuck at Setting pit file
See this... Captivate Connection Issues...
And u may need to try a Heimdall One Click if the Odin doesn't work after seeing the thread above.
See here for Odin or Heimdall One Clicks... http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SAMSUNG-SGH-I777 using xda premium
4-2ndtwin said:
See this... Captivate Connection Issues...
And u may need to try a Heimdall One Click if the Odin doesn't work after seeing the thread above.
See here for Odin or Heimdall One Clicks... http://forum.xda-developers.com/showthread.php?p=18370912
Sent from my SAMSUNG-SGH-I777 using xda premium
Click to expand...
Click to collapse
Bud thanxx for the reply i just fixed it
had an old package of I9000 lying in the comp...used the pda first to fix the filesystem then used all pit,phone,pda, the last package and the phone took it...now i am back to my custom gb f/w yeah i was considering Heimdall but playing around somewhat with odin worked
Good deal.
Some Captivates do not like the One Clicks, but will accept the flashing of the Firmware through the regular Odin.
Sent from my SAMSUNG-SGH-I777 using xda premium

Categories

Resources