Related
I apparently am retarded. let me first off say that. Second, you are all Gods to begin with, however immortal Gods can you give me the knowledge to fix my issue.
I am running CM +JF 1.4 on my T-Mobile G1. Everything went pretty smooth, no large issues.
Used the CM Updater found on the market to find a couple of themes. Tried the Alien theme, no problems, checked out Enoch's theme, pretty nice, then tried "Marks Theme" and when I rebooted, the phone froze on the splash screen that says "Tmobile G1" I booted into recovery mode and wiped the data, and tried to reapply a different theme, with no success. It still just stays frozen on the splash screen. Any help would be SOOOOOOo appreciated. I would be fine with even a full wipe as long as I can get back up and running.
Mike
Just do a full wipe and reflash your rom.
..awww I miss JF.
Also, I cannot get the phone or the computer now to recognize my 8GB card. My 1GB card recognizes fine though.
ffff00 said:
Just do a full wipe and reflash your rom.
..awww I miss JF.
Click to expand...
Click to collapse
I had a friend who helped me mod it, and I am unsure of the exact steps. when you say a FULL WIPE, is that the wipe you are referring to through the recovery console?
It might be corrupted, you can probably still reformat it from console via parted.
I downloaded the current stable version from
wiki.cyanogenmod.com/index.php/Latest_version
to my SD card, renamed it to update.zip, then inserted it into the phone. I booted into recovery mode. I clicked wipe data, I then clicked apply update.zip, it said it verified the image, then installed the image. It still hangs at the splash screen.
phlash said:
I downloaded the current stable version from
wiki.cyanogenmod.com/index.php/Latest_version
to my SD card, renamed it to update.zip, then inserted it into the phone. I booted into recovery mode. I clicked wipe data, I then clicked apply update.zip, it said it verified the image, then installed the image. It still hangs at the splash screen.
Click to expand...
Click to collapse
Do you have a nandroid back up in recovery that you can go to? If so that would be the best route. If not then I suggest doing a full data/dalvik/ext wipe and reinstall your rom.
I am a moron....Please delete....
I was trying to use too new of a rom with older files.....i was using a version 5 because i was too retarded apparently to read that it wasn't compatible the way I was trying to do it. I am back up and running again. Sorry for the waste of time and space
thanks,
mike
We all have our moments. And it's not a waste of time =D
I bricked my CDMA Hero. I rooted it with the super one click, and installed a early version of froyo, and had some issues with it. I wanted to get it off, so I used CWM recovery, and formatted everything. Now when I turn it on it goes to the HTC opening screen, and stays there for hours until the battery dies. It will charge, but my computer doesn't recognize it, and it will not boot. What can I do?
Bricked means it is a brick and that is it, your phone still turns on so the good news is that it is not bricked.
Need some more info before anyone can help:
1. You reformatted everything using clockwork recovery
2. Did you re-install a new ROM?
3. Did you restore a nandroid backup?
I would recommend booting into recovery and wiping everything (factory reset and dalvik-cache) in recovery, then reinstall froyo - once you are booted and running you can figure out what you want to put on it. At least your phone would work then.
stonemad said:
I bricked my CDMA Hero. I rooted it with the super one click, and installed a early version of froyo, and had some issues with it. I wanted to get it off, so I used CWM recovery, and formatted everything. Now when I turn it on it goes to the HTC opening screen, and stays there for hours until the battery dies. It will charge, but my computer doesn't recognize it, and it will not boot. What can I do?
Click to expand...
Click to collapse
Just what Heaterz16 said...
I'm also pretty sure your phone isn't bricked, as long as you can still get into Recovery, it Most Likely can be Fixed!
I also Recommend trying to Wipe Everything, then Reinstalling a New Rom, Also as a Suggestion... If it were me I'd Probably Choose a Different ROM to install! My Very First ROM I Flashed was a Cyanogen one, and I had Trouble with it Booting Also!!
Try LiquidSense... its Only 2.1, but its Stable, It Boots Fast, and just plain out Fast as Hell!
You can always Switch to Whatever you want... Once you get your phone back to a Working Condition!
Good Luck!
Sent from my HERO200 using XDA App
I cannot get it into recovery now. It will turn on, but it stops at the initial HTC screen, and stays there until the battery dies. When I connect my phone with my computer, the computer recognizes it, but I can't seem to get the 2.1 exe from HTC.com download to the phone. My guess is I wiped the thing clean. Unfortuneately, I didn't back anything up.
I can't even get into recovery, it just sits on the HTC startup screen until the battery dies. It does recognize when I connect it to my computer, but running the 2.1 exe doesn't do anything.
Can you adb into the phone and flash a recovery?
I think that would be a helpful start.
stonemad said:
I can't even get into recovery, it just sits on the HTC startup screen until the battery dies. It does recognize when I connect it to my computer, but running the 2.1 exe doesn't do anything.
Click to expand...
Click to collapse
Pull the battery, hold volume down and power and you should boot into bootloader. I believe it is *home* to get you back into recovery. Then reinstall a new rom and you should be good to go.
kwahomba said:
Pull the battery, hold volume down and power and you should boot into bootloader. I believe it is *home* to get you back into recovery. Then reinstall a new rom and you should be good to go.
Click to expand...
Click to collapse
kwhomba,
he can't get into the recovery.
mtran2988 said:
kwhomba,
he can't get into the recovery.
Click to expand...
Click to collapse
t-y, got it. Yeah, then adb a new recovery image may be the only thing. But he may not even be able to get in then.
Just a matter of waiting right now.
He did say his computer was recognizing his device, so he might be ok.
If he can flash a new recovery, or even just adb.. then he can start rebuilding it.
stonemad:
You'll want to grab a recovery, and try to connect to your phone via ADB when it's on.
Then do adb shell
then : flash_image recover [name of recovery].img
let us know
Ok, I can get to the CWM recovery, there is no backup files, no recovery files, and no files on my sd card. I cannot seem to get an opperating system on. I mounted my phone to my computer and downloaded .zip files, but it still says no files available.
How do I flash a recovery, I can't find any files anywhere.
i have .zip files on my sd card to flash, but when I try to apply them it says no files found.
Ok, I have been working on this all day. Thank you to every body who answered. This is the situation as best as I see it. I can use the power and the down volume buttons to go to recovery mode. I have ClockworkMod 2.5 and can mount my computer to my sd card. It appears that I don't have an opperating system at all, or anything else on the phone. I have downloaded several .zip files and tried to install them, I can mount them, but when I try to apply them it states that there are no update.zip files on the sd card. I have deduced that I need an opperating system for an update to work, but I could be wrong. I am having a hard time finding the right files to use to get my phone to go. It seems salvageable, but I'm not sure how. People have sugested a couple of Mods to instal, but I don't know how to do that with what I have. CWM is asking for a update.zip, or a recovery.zip, but I don't know wich one at which time, or even how to get it to flash. That is what I think I know, but that is subject to change depening on what you all know.(showing just how foolish I really am) Thanks again people for you time and advice, I really do appreciate it.
Don't select "install update.zip", select "install zip from SD card" or whatever the option is called.
I've tried that too, it seems like all the software is gone. HTC, Sprint, Google, and Android. Does anybody have a download they think will work. I'm at the point to try anything.
stonemad said:
I've tried that too, it seems like all the software is gone. HTC, Sprint, Google, and Android. Does anybody have a download they think will work. I'm at the point to try anything.
Click to expand...
Click to collapse
What software are you talking about? Sprint, Google, and Android what, specifically? A download for what?
Mount usb storage in recovery, put rom of your choice on there, and flash?
what about kernals, how do I know that I have everything I need?
ROMs generally have kernels in the zip builds already. From the sounds of it, you're kind of lost at what you're doing.
Do you have a SD card reader? if so, plug in the SD card to your computer and pull over a ROM zip, like Cyanogenmod or whatever is to your liking.
Then in recovery, go to "install zip from sdcard"
go to "Choose zip from sdcard"
then search for the ROM zip you put on the sd card.
State exactly STEP BY STEP, what you are doing. Your phone is perfectly fine, you just dont have a ROM on your phone, which is why you cant boot. You're not missing kernels, or anything, you simply dont have the baseline of a ROM on your phone yet.
Post back
I don't know where or how to find a rom, I have heard good things about cyanogen, but can't seem to find where to download it. Is ClockworkMod a rom, and if so how do I use it. You're right, I got way in over my head, and now I just want my phone back the way I bought it. What is your favorite rom, and can you give me a link. Thanks again everyone.
Well I don't know what I did but this morning when my nookie froyo emmc was at 20 percent it decided to turn off and not turn on and won't turn on when charged and will not boot any sd cards. I feel stupid but after my nook working on emmc froyo for a week and now its not even turning on I feel very stupid. All help is appreciated, thanks!
Sent from my ADR6300 using Tapatalk
Have you tried booting to the CWR card yet? And using Samuelhalff's zip that restores the stock partitions? This seems to have worked for many people experiencing the fatal Froyo crash. Take a look at the 'Easily Restore to Stock" thread found here in the Nook forums. And in the end if your device truly won't turn on, then chances are the guys down at B&N won't be able to either. *Warranty*
Well I have tried monster root pack as a card but I haven't tried stock partitioning,i dont know where the thread is. But will this let me even boot an sd card ?
Sent from my ADR6300 using Tapatalk
RileyGrant said:
Were you running froyo off emmc? If so:
http://forum.xda-developers.com/showthread.php?t=931720
I recommend flashing this ROM instead though (pre-rooted 1.1):
http://forum.xda-developers.com/showthread.php?t=932145
And yes if you insert the CWR sdcard into the nook and hold the power button, it will power on. The reason it isnt powering on currently is because your froyo boot partition is corrupted, not because of the nook itself. The CWR sdcard has a different boot partition that your nook will see and boot to when you hold the power button down with the CWR sdcard in.
Click to expand...
Click to collapse
Thats my post from an earlier thread with someone having the same issues. It worked for him, it should work for you. Just make sure you follow the steps right and especially make sure your burning the Clockwork image to your SDcard correctly that way it will boot into Clockwork instead of staying black.
I'm gonna have to give these steps a whirl. The downloads are taking foreeeever.
Also had Froyo installed with CWM and just got finished installing gapps. I went to format an SD card, had no luck, and tried to reboot. Ol' Nookie decided not to come back to life after that.
edit: wait, instead of flashing the stock rom can I flash the pre-rooted 1.1 rom?
Just read this over on android central (in a thread about flashing honeycomb). I believe it is what I did and why my nook won't boot:
****While running Honeycomb from Internal Memory NEVER choose the option to format your SD Card from within Honeycomb. The files that were altered to let HC run internally will lead the OS to actually format your boot partition instead of your SD. If you need to format an SD, do it on your computer or in an Android phone, etc.*****
Click to expand...
Click to collapse
Drat. Just got my CWM image on my sd card. Here goes nothin! Will report back
OK, I have CWM booting off the SD card, i'm formatting system and data under mounts and storage, and then i'm installing the 1.0.1 complete restore. It goes through and then I got to reboot system. Then...nothing. Back to black screen. Help please!
I can pop the SD card back in and boot back to CWM. I've tried several times now with no luck
samuelhalff has a flashable zip that restores the boot partition for situations like this. Go look for it in the development forum. you should be able to flash it using CWR and your NC ought to boot.
eyecrispy, thank you! samuelhalff's boot zip followed by his 1.0.1 complete restore zip did the trick.
RileyGrant, thank you for your post as well. Much obliged!!
Mine just shows a blank screen. All I did was boot into ClockwordMod Recovery, make a backup, then reboot. I was going to flash the Honeycomb Rom, but decided to give it some more thought first. Now All I get is the blank screen, it won't power all the way off, and it won't power on or anything
EDIT: Managed to get it to turn off, but when I turn it back on it boots into recovery. I select Reboot System now, and it reboots back into recovery. Forgive me, I'm so new to this Nook Color thing lol
EDIT AGAIN: Tried using the Monster Pack or whatever, flashed the removeclockwork.zip, followed by the installclockwork.zip, then removed the SD card, rebooted, and went right back into Clockwork Recovery. What gives?
YUP Same thing happened to me. I have read all the posts in this thread and i did try to format the card i had in my nook in the brand new phiremod froyo rom. Now it wont boot at all. I have a CRW card on hand and it wont even boot that. Idk right now, nothing is working.
Try reading through the Dummies Guide to Fixing 'My Nook Won't Boot'.
I did it last night and I'm back up and running again. Here's my post for an abridged version of what I did last night: http://forum.xda-developers.com/showpost.php?p=11374824&postcount=29
I had the same problem until I flashed the repartition fix.
Give that a try
I've got the exact same problem as the OP. Running Froyo on EMMC with no problems for a few days, then I left it for a while and now it wont turn back on or boot from uSD.
I've tried long presses on the power key, usb cable power up, but nothing works. I've tried the v4 HC image and the clockwork recovery image and neither are booting.
I verified the CWR image on my android phone and it does boot on my phone, so the image is definitely okay.
Hate to think it, but could this be a battery management issue in the 0.6.7 image and the battery is now screwed? Doesn't seem like boot partition corruption to me.
Any comments or suggestions are welcomed
ChrisAC84 said:
Mine just shows a blank screen. All I did was boot into ClockwordMod Recovery, make a backup, then reboot. I was going to flash the Honeycomb Rom, but decided to give it some more thought first. Now All I get is the blank screen, it won't power all the way off, and it won't power on or anything
EDIT: Managed to get it to turn off, but when I turn it back on it boots into recovery. I select Reboot System now, and it reboots back into recovery. Forgive me, I'm so new to this Nook Color thing lol
EDIT AGAIN: Tried using the Monster Pack or whatever, flashed the removeclockwork.zip, followed by the installclockwork.zip, then removed the SD card, rebooted, and went right back into Clockwork Recovery. What gives?
Click to expand...
Click to collapse
how did you get yours to turn off, my screen says loading... and is stuck there. any help in getting mine to shut off would be helpful
Does holding power button for a few seconds turn it off?
Same thing happened to me, this fixed my problem: http://forum.xda-developers.com/showthread.php?t=986977
Sorry for asking what's probably a silly question, but I haven't seen an answer. Is this known to the Nookie dev(s) and being addressed? Just had it happen running Nookie 0.6.8 off the SD card. I was really enjoying it and just telling the wife how I think I'll flash it to the eMMC, but I might have to reconsider if this might occur. Battery was ~80%, no goof-ups reformatting anything. Locked the screen around 1:10 this afternoon & hadn't touched it since. Got home about an hour ago to turn it on, nothing. Disappointing, Nookie is pretty good!
nook color wont turn on
so what to do if i dont have a sd card with cwr or honeycomb (what i was trying to run)ive already called for the replacement, but i would still like to know what to do.
I found this thread after suffering the same or similar problem to everyone else. I turned off the screen and set my nc aside for a few minutes, then it would no longer boot. Screen just stayed black and was completely unresponsive to any input. Working my way through some troubleshooting, I plugged the nc into my computer via USB and it booted into CM7 instantly. I have no idea why this happened, but it's working fine now.
I rooted my nook yesterday using the autonooter 3.0 which i guess is not official, but anyways, I'm just not happy with it and I would like to get my Nook back to stock. However, when I try to do 8 failed boots, it won't cancel the boot when I press the power button. I mean I am jamming it down and it still goes through the boot.
Unfortunately, I also have not figured out how to get adb working. I followed the instructions on nookDevs and adb devices kept showing my SN as 11223344556677. Mind you it was showing up fine in device manager as Android composite ADB device. I figured heck with it I'll just root it. Now its not showing up at all.
So it seems like I'm hosed as far as resetting my nook. Any way out of this?
install clockwork recovery and use that to flash the stock rom.
ok well I installed ROM manager and then flashed CWR to my SD card. I then made a backup of my current rom in case I somehow decided to go back to it. But after selecting reboot system now in CWR it keeps booting into CWR. How do i get out of it?
Is the SD card flashed to CWR still in there? Is like a pc set to boot from the cd drive before hdd, no matter what, if theres a sd card in it, it will try to boot from it first..
You can remove the sd card when in CWR just remove it and then select reboot
Sent from one of those missing Droids
Yeah, I took it out. But for some reason it didnt recognize it wasnt in there. so it was pretty much boot cycling just it was going into CWR. I just flashed the stock 1.0.1 ROM so it's working now, just have to reregister the nook.
Ok so here's what happened.
I rooted my nook with autonooter 3.0.0, then I installed rom manager to install cwm. I installed the latest version of cwm and I tried to make a backup, it ended up in my nook only booting in cwm. So I found a cwm removal script and removed cwm. I booted my nook and opened rom manager and I decided to try an older version of cwm. I pressed make a backup in rom manager and it just went into a boot loop. I can't really turn off my nook, and I can't really turn it on. It just keeps going to "touch the future of reading", then turns off, then a couple of minutes later, goes back to "touch the future of reading". To make it clear, I do not have a backup.
So can anyone please assist me in fixing my nook? I'm in a dead end here.
Sounds like a boot loop try
Method one: Eight interrupted Boots
1. Power off the nook.
2. Tap the power button.
3. As soon as Welcome to the future of reading appears, hold the power button down to interrupt the boot process.
* If the boot animation does not appear, add 1 to your interrupted boot count.
* If the boot animation DOES appear, your interrupted boot count is reset to zero. Start over.
4. Repeat from step 2 until your failed boot count reaches 8. At this point, the nook will re-flash its /system partition. You will see the process on the right.
From Nook Devs
i went through this yesterday... i was told you can't brick a nook color so I restored it back to the original firmware...go to this website www.theunlockr.com then click the how to's then go to Android and look for Nook Color then look for how to restore to stock firmware and follow the instructions. they worked for me and I'm sure they will work for you also...Good Luck
Stupner said:
Method one: Eight interrupted Boots
1. Power off the nook.
2. Tap the power button.
3. As soon as Welcome to the future of reading appears, hold the power button down to interrupt the boot process.
* If the boot animation does not appear, add 1 to your interrupted boot count.
* If the boot animation DOES appear, your interrupted boot count is reset to zero. Start over.
4. Repeat from step 2 until your failed boot count reaches 8. At this point, the nook will re-flash its /system partition. You will see the process on the right.
From Nook Devs
Click to expand...
Click to collapse
Thing is, I can't power off or power on the nook.
I'm going to try and restore it to stock.
bennook said:
Ok so here's what happened.
I rooted my nook with autonooter 3.0.0, then I installed rom manager to install cwm. I installed the latest version of cwm and I tried to make a backup, it ended up in my nook only booting in cwm. So I found a cwm removal script and removed cwm. I booted my nook and opened rom manager and I decided to try an older version of cwm. I pressed make a backup in rom manager and it just went into a boot loop. I can't really turn off my nook, and I can't really turn it on. It just keeps going to "touch the future of reading", then turns off, then a couple of minutes later, goes back to "touch the future of reading". To make it clear, I do not have a backup.
So can anyone please assist me in fixing my nook? I'm in a dead end here.
Click to expand...
Click to collapse
You need to boot a stock image. Try this link http://www.androidtablets.net/forum...ll-clockwork-recovery-revert-stock-image.html
I'm So hoping someone will help me, I tried to root my device but it didn't work I couldnt get off the software so I installed 2gb clockwork 0.7 and nook complete restore 1.0.1 I followed all tutorials carefully, but when it comes to restore data it says no files found. Lost, I went ahead with the restore. It appeared to work except now I get a message flashing up that I cant read the screen just flashes and I think the partitions are lost too. I'm on the verge of tears. (im a girl dont judge) lol. And I'm lost with my expensive doorstop. PLEASE can anyone help me fix this as i'm at a loss (
No need to worry. The nice thing about the NC is that it will always boot from the SD card first. Sounds like you tried this...I suggest deleting everything you have (clockwork mod files, stock restore files etc) re-download everything and start fresh.
on your computer, format your uSD card, use Win32DiskImager to flash the clockwork mod boot image onto the uSD card and copy over the stock restore files. Place the uSD card into the NC and reboot. you should boot into clockwork mod and from there you can install the stock zip file from the uSD card.
GL!
Thanks,
I managed to get it working by resetting 8 times and booting a factory reset, but now it wont install any updayes and i'm stuck on the poo 1.01 software. I tried putting the official update on clockwork and booting from there but it says file bad with any version I use (screams in frustration)
This will fix your partitions
It was awhile ago, so I don't remember the exact steps, but the following file will fix everything...
nookie-froyo-0.6.8.custom.3.zip
When you unzip it you will get the following:
nookie-froyo-0.6.8.custom.3.img
You will need a program like 'WinImage' to write this image file to your SD Chip. Once done, boot your Nook with this chip and install Froyo. You probably don't want Froyo, but thats OK. This is just the first step... but it is key.... This install will 100% recreate and fix all your partitions.
Now you have two choices,
1. Find a stock nook image, and install it to your nook. I think it is 1.01
or
2. Find 'boot.img' and 'system.img' for the nook color. Write those to a bootable SD chip and install.
I am not sure if it was #1 or #2 that worked for me. Try #1 first. If it works, you will be able to start up your nook and register it with B and N. Then you can download their 1.2 update and install it as they instruct.
Good luck.
Follow this thread and you can get it back to original stock 1.0 or 1.01 and then do the updates as normal by waiting for OTA or sideloading them.
http://forum.xda-developers.com/showthread.php?t=931720
Thank you guys I've followed your steps and also looked around this site and im back on the latest stock software. I appreciate your help