I recently upgraded my sgs to 2.3.4 xxjvq and rooted it. but i am facing an issue that I can't turn on my phone's bluetooth. However it works when I restart my device but if I reboot the device then again it stops working for strange reasons. I thought it to be cf-root 3.7 kernel issue and updated my busybox but still it does not help.
Please help!
It's to do with your kernel. Try a different one.
can u suggest the same?
Are you running a stock or a custom ROM?
If you're using a custom and it comes with a kernel, try that.
If you're on stock, give Galaxian a go.
I'll give galaxian a try...thnx for d information!
I'm using CF-Root 3.7 and got the same issue. I wiped Dalvik cache, reboot the phone and now all is working fine.
GARVENAR said:
I'm using CF-Root 3.7 and got the same issue. I wiped Dalvik cache, reboot the phone and now all is working fine.
Click to expand...
Click to collapse
thanks for your input...i will try this before going for custom rom
Related
Ive just installed 2.3.3 stock and rooted it. I have CWM v2.5.1.3 - Voodoo Lagfix...
But i have a big problem, a cant flash anything, i mean, i can flash and all but after that my phone wont boot, it is stuck at galaxy logo... :/
disable voodoo lagfix and install again, try this
Stuck for how long? it can take a while for a new rom's first boot.
orodrethlars said:
Stuck for how long? it can take a while for a new rom's first boot.
Click to expand...
Click to collapse
Ive waited for 30min
Rayman206 said:
disable voodoo lagfix and install again, try this
Click to expand...
Click to collapse
I did this but again, it doesnt work
What are you trying to flash? Darkys v10 kernel worked like a charm for me when flashing that rom. And newest speedmod kernel should work for any new rom install.
try
That's unfortunate, try clearing Dalvik Cache, Cache and reboot whithout lagfix. If this doe not help try reflashing or factory reset. Worked for me.
android167 said:
I did this but again, it doesnt work
Click to expand...
Click to collapse
I had this problem too while I was flashing it along with Darky's 10 RC3, however I did factory reset and tried again few times, and it just worked. I don't know how, but it did. Maybe you should try again.
I tried to install the illuminance Rom last night, and it kept getting stuck at the ATT logo. I reflashed back to stock did a master clear, flashed a stock 2.3.5 uckj3 gingerbread Rom with corn kernel v307 also ATT gingerbread boot loaders. I used CWM to install the ROM, it'll restart then get stuck and get stuck at the ATT logo....is there something I'm missing? I've installed other ROM and have had no issues until now?!?!
If you used Corn kernel, are you sure you where on RFS format and not ex4?
it was rfs format before I tried to install
Did you make the file (don't remember exactly wich) that disable Voodoo. There is no reason for it to bootloop. After you flashed stock did you let it boot up? Maybe try with Boog kernel to flash then flash wich ever kernel you want to use?
I'll try the boog kernel.....I also ensured that the lagfix for system and data was disabled through CWM recovery ....in the install instructions it stated that it would take awhile to boot, I let it set for two hours. One thing I noticed is that 150 jpegs were installed
Sent from my SAMSUNG-SGH-I897 using xda premium
Doubt this might be it but, If you set it on CWM to disable lag fix reboot in cwm then flash. Random thought.
LOL....did that also.
Sent from my SAMSUNG-SGH-I897 using xda premium
Guess I'll start over clean again....
SGH-I897 Cappy
I897UCKJ3 2.3.5 Gingerbread
Corn kernel UCKJ3 V307
FASTY III V1 KJ3
Tegrak OC Ultimate
lilbigdude1 said:
Guess I'll start over clean again....
SGH-I897 Cappy
I897UCKJ3 2.3.5 Gingerbread
Corn kernel UCKJ3 V307
FASTY III V1 KJ3
Tegrak OC Ultimate
Click to expand...
Click to collapse
My boot getting stuck got fixed after Wipe data/factory reset in CWm, wipe cache, wipe Dalvik cache, - all three -then install illuminance. Tried that ? Starting from stock KJ3 no bootloaders.
Importantly: Can you boot with just Illuminance boog kernel (the one that comes wiht the ROM, no other kernel flashed)? I presume you cannot boot a fresh Illuminance install............if this is the case wiping as above should help.
I finally got illuminance to install, and is working great.
this may seem like over kill but everytime I flash a new ROM I start from scratch and flash to stock and master clear and then build from therethis is the first time that I ever had any issues by doing it this way. usually I have it setup up in 10 to 15 minutes it seems to save any issues later down the road as far as being buggy.
Glad to hear it
Hi, I tried to install Illuminance 1.1, but I think the file is corrupted. I downloaded it twice, from different locations, and its the same zip file.
I tried to decompress it before installing it, just to check file consistency, but lots of files can´t be decompressed.
Anyone had this problem? If not, any way /any where to safely download it?
Thanks!
In the Illuminance Rom Thread, in the OP, there is a link to IlluminatedOne's website, where u can find a good non-corrupted download and u will also find the installation instructions.
Not sure why u think u had a corrupted download ?? But u should b good to go once u get to the website.
As of this version 1.1 release, u should only be downloading the Illuminance Rom from said website.
Sent from i897uckj3
I downloaded my version from Mega-upload. I tried it again last night just for...you know....and received the same results of being stuck on the att logo for hours. as usual i flashed to stock and master cleared, GB boot loaders, reinstalled stock 2.3.5 and reinstalled luminance and before i rebooted i installed the samurai kernel, then rebooted and everything worked as normal....so being fairly new to the whole Dev scene i don't know why that would make a difference, but it works fine and it didn't get stuck on the att logo.
oh and thanks twin I'll try and go to the website and check it out
I try to install but don't work... after that i flash it, the phone lock to logo screen "google" and i can't go to CWM i must use odin to reflash. If install rc3.1 it's all ok.
Where is the problem?
Thanks.
Did you try looking at the help page on the thread in the development section? It's right before the post is finished, there will be a link that will lead you there.
Hope that helps, if not I can try to just copy and paste the instructions hahaha
scheccia said:
I try to install but don't work... after that i flash it, the phone lock to logo screen "google" and i can't go to CWM i must use odin to reflash. If install rc3.1 it's all ok.
Where is the problem?
Thanks.
Click to expand...
Click to collapse
Did you do a full wipe before flashing RC4.1?
kabracity said:
Did you do a full wipe before flashing RC4.1?
Click to expand...
Click to collapse
yes... i try to flash a miui rom first also.
I try to do a full wipe... i try to install a original rom... but when i flash rc4.1 the phone stuck to logo.
Ensure you have backed up your EFS directory; if you don't know how ask.
To be honest, there appears to be some inconsistency in the reliability of the 4.1 RC release (across handsets); I have had persistent WIFI issues and then when the wifi fix was released I found the phone to just be a little laggy.
My advice if RC 3.1 works well for you is to keep it on there for now and wait for the next release they make.
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
torrentship said:
Ensure you have backed up your EFS directory; if you don't know how ask.
To be honest, there appears to be some inconsistency in the reliability of the 4.1 RC release (across handsets); I have had persistent WIFI issues and then when the wifi fix was released I found the phone to just be a little laggy.
My advice if RC 3.1 works well for you is to keep it on there for now and wait for the next release they make.
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
Click to expand...
Click to collapse
I agree with you... RC3 was fine for me... fast and all worked... RC4 has some wifi issues... It switch on/off and doesnt stop till i reboot the phone... im thinking about to downgrade to RC3.1 and wait till the next release...
Sent from my GT-I9000 using XDA App
torrentship said:
However, if you still wish to flash it, there is no 100% working way - just keep factory reset, dalvik wipe, cache wipe, reset until it starts working! That's what I did as the original instructions did not work for me.
Click to expand...
Click to collapse
Yes i try it(no backup efs)
If i flash 2 time the rom the phone stuck it and i can't enter in cmw
.. is the only rom that give me this problem... bha...
Hello, have you tried to download the rom again? Maybe it's a bad download..
That's odd, for me i got stats 7 but was because i was flashing the I9000B version and my phone was with the CWM for I9000. Try using odin and flash a sotck rom, after that install the CWM and then the RC4.1.
If anyone want to know the procedure that i do to install the RC4.1 is this:
Starting for CM7 --> flash the ARO 2.3.3 rom to re-write the bootloader (check this option in odin) --> flash the ZTO 2.2 rom to re-partition in original size partitions --> flash the 2.2.1 ARO because it's a nice rom and don't have all the trash that is present in ZTO version --> through kies flahs the ARO 2.3.3 original.
After that the procedure to install the RC4.1 is the standard: flash CWM then install the ROM.
I had problems going from 3.1 to 4.1. Same issue as OP.
Process I followed:
-Flashed CWM through heimdall
-Flashed devil kernel
-Flashed CM7 (had to do this twice in a row)
-Flashed ICSSGS 3.1
-Flashed 4.1 but before I rebooted my phone, I flashed Devil one last time.
Since then, phone has been rocking along just fine!
Sent from my GT-I9000 using Tapatalk
Bena1988 said:
Hello, have you tried to download the rom again? Maybe it's a bad download..
Click to expand...
Click to collapse
Yes... three times.
I'm having the same problem here.
I tried the first point on the Common Issues page but I'm still not able to go into CWM!
I flashed the Speemod Kernel using heimdll but I can't go back to CM7. I'm getting a Stat 7 error.
Also tried the Devils kernel (Devil_1.0_CFS) with no help ....
Any ideas?
Just wondering...
MaesterB said:
I had problems going from 3.1 to 4.1. Same issue as OP.
Process I followed:
-Flashed CWM through heimdall
-Flashed devil kernel
-Flashed CM7 (had to do this twice in a row)
-Flashed ICSSGS 3.1
-Flashed 4.1 but before I rebooted my phone, I flashed Devil one last time.
Since then, phone has been rocking along just fine!
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
why on earth did you flash the CM7 as a part of the process? I always have just downloaded an appropriate kernel (devil, stockplus etc..) + ICS ROM (latest was RC4.1), once I'd rooted my stock 2.3.6 ROM with CF-Root (takes only 5 minutes). ICSSGS' ROMs can be applied straight on top of any previous ROM, the only requirement is that you have root privileges + CWM installed. Flashing CM7 is often frustrating, at least for me. I personally see no point in flashing it before the ICS ROM. If you know better, pleasy enlighten me
Arvokm said:
why on earth did you flash the CM7 as a part of the process? I always have just downloaded an appropriate kernel (devil, stockplus etc..) + ICS ROM (latest was RC4.1), once I'd rooted my stock 2.3.6 ROM with CF-Root (takes only 5 minutes). ICSSGS' ROMs can be applied straight on top of any previous ROM, the only requirement is that you have root privileges + CWM installed. Flashing CM7 is often frustrating, at least for me. I personally see no point in flashing it before the ICS ROM. If you know better, pleasy enlighten me
Click to expand...
Click to collapse
Thats the way I do all went well...
Sent from my GT-I9000 using XDA App
Advice please...stuck at bootscreen! (followed instructions in crash thread s follows
1. Was on rocket rom v10 with notecore.
2. Flashed abyss
3. 3 wipes + JBroid cleaner
4. Flashed crash 8.2
5. Rebooted
6. Stuck on 'galaxy note' boot screen, tried rebooting. Still stuck. (waited over 10 minutes)
Advice please!!
Did you try booting to recovery and flashing again? Or try clearing cache and delvik cache.
barretp said:
Did you try booting to recovery and flashing again? Or try clearing cache and delvik cache.
Click to expand...
Click to collapse
Yes, tried booting into recovery and wiping again, didn't work. Tried reflashing, still stuck. Tried flashing a different kernel, still stuck.
What's going on?!
Edit: I'm suspecting JBroid might be the issue here..have flashed in the past with no problem but this time decided to use JBroid (as advised in crash thread)..
When you say wiping, do you mean factory reset or wiping cache? If those didn't work flash a stable CM9 kernel, reboot in recovery, and then try to flash again.
barretp said:
When you say wiping, do you mean factory reset or wiping cache? If those didn't work flash a stable CM9 kernel, reboot in recovery, and then try to flash again.
Click to expand...
Click to collapse
Tried both. First just wiping cache/dalvik, then just doing factory reset (after installing notecore because of mmc_erase bug). Neither worked! The only kernels I have on my sd are notecore, abyss. Running out of options..may just try flasing rocket rom again..
octavian90 said:
Tried both. First just wiping cache/dalvik, then just doing factory reset (after installing notecore because of mmc_erase bug). Neither worked! The only kernels I have on my sd are notecore, abyss. Running out of options..may just try flasing rocket rom again..
Click to expand...
Click to collapse
Try flashing a pre rooted stock GB firmware and see if you get the phone to work. Then, try flashing from there.
glevitan said:
Try flashing a pre rooted stock GB firmware and see if you get the phone to work. Then, try flashing from there.
Click to expand...
Click to collapse
Flashed back to RR v10 without any problems. Not sure why Crash wouldn't install but that was quite a scare!
octavian90 said:
Flashed back to RR v10 without any problems. Not sure why Crash wouldn't install but that was quite a scare!
Click to expand...
Click to collapse
glad you have your phone back. Maybe a bad download?
Sent from my GT-N7000 using xda app-developers app
Really digging the positive advice from everyone, thanks! It was a bad download. Downloaded again and flashed just fine =D.
Sent from my GT-N7000 using Tapatalk 2
Hi guys
My friend has a Galaxy Ace running Froyo 2.2, everything went so OK till he tried to update into Gingerbread 2.3.4 via Odin & cooper
Device boots well and everything is smoothly good, but when he tried to access WiFi, it not works yet!!! The Bluetooth stopped working too
Tried to give him another version of GB 2.3.6 also flashable via Odin, nothing changed!! Tried to flash 4.2.2 CyanogenMod, thinking it's a Kernel issue, nothing changed too still not working
any help?!!
TeraXimoS said:
Hi guys
My friend has a Galaxy Ace running Froyo 2.2, everything went so OK till he tried to update into Gingerbread 2.3.4 via Odin & cooper
Device boots well and everything is smoothly good, but when he tried to access WiFi, it not works yet!!! The Bluetooth stopped working too
Tried to give him another version of GB 2.3.6 also flashable via Odin, nothing changed!! Tried to flash 4.2.2 CyanogenMod, thinking it's a Kernel issue, nothing changed too still not working
any help?!!
Click to expand...
Click to collapse
Flash a fresh stock via Odin and then do wipe data/factory reset and wipe cache partition if it doesn't work you could try to flash CF-Root b84 kernel over android gingerbread it contains useful libs and wifi modules
Recently he told me something strange!!!
he flashed CyanogenMod 4.2.2 without being rooted yet!!! only custom recovery was installed.... can it be strange??
TeraXimoS said:
Recently he told me something strange!!!
he flashed CyanogenMod 4.2.2 without being rooted yet!!! only custom recovery was installed.... can it be strange??
Click to expand...
Click to collapse
No, but I don't like this method CM roms are pre-rooted
Tried to flash the Kernel with CWM first time. It says installtion aborted
so Flashed another version of CWM and tried again.. it flashed successfully but WiFi still doesnt work at any case
Any help??
TeraXimoS said:
Tried to flash the Kernel with CWM first time. It says installtion aborted
so Flashed another version of CWM and tried again.. it flashed successfully but WiFi still doesnt work at any case
Any help??
Click to expand...
Click to collapse
...do 3 wipes via CWM 5.0.2.6 FIXED and then use Odin to flash a fresh stock finally do wipe data/factory reset and cache partition. Check out if your wifi works, if not flash ROOT + CWM and finally flash Cf-Root b84. If your wifi still not working, It might be a hardware trouble
Can it really be a hardware fail?? Everything was working PERFECTLY just before update!!
Up
TeraXimoS said:
Up
Click to expand...
Click to collapse
Try dialing *#*#526#*#* in Stock rom