Advice please...stuck at bootscreen! (followed instructions in crash thread s follows
1. Was on rocket rom v10 with notecore.
2. Flashed abyss
3. 3 wipes + JBroid cleaner
4. Flashed crash 8.2
5. Rebooted
6. Stuck on 'galaxy note' boot screen, tried rebooting. Still stuck. (waited over 10 minutes)
Advice please!!
Did you try booting to recovery and flashing again? Or try clearing cache and delvik cache.
barretp said:
Did you try booting to recovery and flashing again? Or try clearing cache and delvik cache.
Click to expand...
Click to collapse
Yes, tried booting into recovery and wiping again, didn't work. Tried reflashing, still stuck. Tried flashing a different kernel, still stuck.
What's going on?!
Edit: I'm suspecting JBroid might be the issue here..have flashed in the past with no problem but this time decided to use JBroid (as advised in crash thread)..
When you say wiping, do you mean factory reset or wiping cache? If those didn't work flash a stable CM9 kernel, reboot in recovery, and then try to flash again.
barretp said:
When you say wiping, do you mean factory reset or wiping cache? If those didn't work flash a stable CM9 kernel, reboot in recovery, and then try to flash again.
Click to expand...
Click to collapse
Tried both. First just wiping cache/dalvik, then just doing factory reset (after installing notecore because of mmc_erase bug). Neither worked! The only kernels I have on my sd are notecore, abyss. Running out of options..may just try flasing rocket rom again..
octavian90 said:
Tried both. First just wiping cache/dalvik, then just doing factory reset (after installing notecore because of mmc_erase bug). Neither worked! The only kernels I have on my sd are notecore, abyss. Running out of options..may just try flasing rocket rom again..
Click to expand...
Click to collapse
Try flashing a pre rooted stock GB firmware and see if you get the phone to work. Then, try flashing from there.
glevitan said:
Try flashing a pre rooted stock GB firmware and see if you get the phone to work. Then, try flashing from there.
Click to expand...
Click to collapse
Flashed back to RR v10 without any problems. Not sure why Crash wouldn't install but that was quite a scare!
octavian90 said:
Flashed back to RR v10 without any problems. Not sure why Crash wouldn't install but that was quite a scare!
Click to expand...
Click to collapse
glad you have your phone back. Maybe a bad download?
Sent from my GT-N7000 using xda app-developers app
Really digging the positive advice from everyone, thanks! It was a bad download. Downloaded again and flashed just fine =D.
Sent from my GT-N7000 using Tapatalk 2
Related
Ive just installed 2.3.3 stock and rooted it. I have CWM v2.5.1.3 - Voodoo Lagfix...
But i have a big problem, a cant flash anything, i mean, i can flash and all but after that my phone wont boot, it is stuck at galaxy logo... :/
disable voodoo lagfix and install again, try this
Stuck for how long? it can take a while for a new rom's first boot.
orodrethlars said:
Stuck for how long? it can take a while for a new rom's first boot.
Click to expand...
Click to collapse
Ive waited for 30min
Rayman206 said:
disable voodoo lagfix and install again, try this
Click to expand...
Click to collapse
I did this but again, it doesnt work
What are you trying to flash? Darkys v10 kernel worked like a charm for me when flashing that rom. And newest speedmod kernel should work for any new rom install.
try
That's unfortunate, try clearing Dalvik Cache, Cache and reboot whithout lagfix. If this doe not help try reflashing or factory reset. Worked for me.
android167 said:
I did this but again, it doesnt work
Click to expand...
Click to collapse
I had this problem too while I was flashing it along with Darky's 10 RC3, however I did factory reset and tried again few times, and it just worked. I don't know how, but it did. Maybe you should try again.
I'm currently on jellycore (hydracore kernel), I download the ICS rom below and tried to flash it via CWM. I wiped cache/dalvik and installed from SD, everything seemed to go ok but now the phone will only boot to the samsung logo.
http://forum.xda-developers.com/showthread.php?t=1872965
Do you think I should try and install an older ROM like gingerbread via PC-Odin ?
Thanks,
mug2k said:
I'm currently on jellycore (hydracore kernel), I download the ICS rom below and tried to flash it via CWM. I wiped cache/dalvik and installed from SD, everything seemed to go ok but now the phone will only boot to the samsung logo.
http://forum.xda-developers.com/showthread.php?t=1872965
Do you think I should try and install an older ROM like gingerbread via PC-Odin ?
Thanks,
Click to expand...
Click to collapse
Why did you only wipe cache and dalvik? You should've wiped data as well. Boot back into Recovery. Flash the Hydracore kernel (if you don't have that, flash the Jellycore ROM because it has the kernel). Reboot recovery. Wipe data, cache and dalvik. Flash stock ICS again. Boot.
andreww88 said:
Why did you only wipe cache and dalvik? You should've wiped data as well. Boot back into Recovery. Flash the Hydracore kernel (if you don't have that, flash the Jellycore ROM because it has the kernel). Reboot recovery. Wipe data, cache and dalvik. Flash stock ICS again. Boot.
Click to expand...
Click to collapse
I'm currently in download mode because I was going to install GB via PC-Odin. Can I just turn off the phone ?. Also is the ROM in the OP ok to flash once I've re-flashed hydracore ?.
mug2k said:
I'm currently in download mode because I was going to install GB via PC-Odin. Can I just turn off the phone ?. Also is the ROM in the OP ok to flash once I've re-flashed hydracore ?.
Click to expand...
Click to collapse
It should give you an option to reboot in download. But you can just hold down volume up + power + home button and restart to recovery.
After you re-flash Hydracore AND REBOOT RECOVERY, you can flash whatever stock ICS you want, just make sure you wipe data, cache and dalvik.
DO NOT WIPE DATA BEFORE YOU REBOOT RECOVERY! Can't stress enough.
andreww88 said:
It should give you an option to reboot in download. But you can just hold down volume up + power + home button and restart to recovery.
After you re-flash Hydracore AND REBOOT RECOVERY, you can flash whatever stock ICS you want, just make sure you wipe data, cache and dalvik.
DO NOT WIPE DATA BEFORE YOU REBOOT RECOVERY! Can't stress enough.
Click to expand...
Click to collapse
Just to be 100% sure, wipe data, cache and dalvik AFTER I've flashed hydracore, rebooted recovery and flashed stock ICS.
mug2k said:
Just to be 100% sure, wipe data, cache and dalvik AFTER I've flashed hydracore, rebooted recovery and flashed stock ICS.
Click to expand...
Click to collapse
You can flash hydracore, reboot recovery, wipe data, cache and dalvik, then flash stock ICS.
Still stuck on the samsung logo, must be something wrong with the ROM I have.
edit: its ok, just took a while
mug2k said:
Still stuck on the samsung logo, must be something wrong with the ROM I have.
edit: its ok, just took a while
Click to expand...
Click to collapse
Good.
It does take longer to boot the first time, especially on TW roms.
andreww88 said:
Good.
It does take longer to boot the first time, especially on TW roms.
Click to expand...
Click to collapse
Appreciate the help dude, got a bit scared for a while. Thought I bricked it
I own a Samsung Galaxy Ace S5830 running on android 2.3.6 with build number GINGERBREAD.DDKQ8.I successfully rooted my device(SU icon in the app drawer), flashed cwm5.0.2.6 with no error.
I flashed gingercruzt 2.2, cm 7.1,7.2,9,10 with the following instructions:
1) Wipe data/factory reset
2) Wipe cache partition
3) Under advanced, wipe dalvik cache
4) Flashed the rom.
After rebooting for the first time, this happens(for every rom I tried):
The phone boots into the rom(the capacitive buttons get turned on) -> setup window is reached -> then the phone starts booting again->in further boots it reaches cm logo only and keeps on booting again and again.
I tried wiping data, cache partition, dalvik cache and reboot. None of it worked.
I flashed the roms again .But still stuck at bootloop.
Ps : I randomly took my sim out and did a complete wipe and the roms work fine!!!.
But with sim again, the same problem persists.
PLEASE HELP.THANKS IN ADVANCE.
If you have installed any custon rom previous than i suggest you to first flash fresh ddkq8 stock and than try to install ur custom rom..
It might be happening because of previous rom data !
Sent from my GT-S5830 using xda app-developers app
gb2793 said:
I own a Samsung Galaxy Ace S5830 running on android 2.3.6 with build number GINGERBREAD.DDKQ8.I successfully rooted my device(SU icon in the app drawer), flashed cwm5.0.2.6 with no error.
I flashed gingercruzt 2.2, cm 7.1,7.2,9,10 with the following instructions:
1) Wipe data/factory reset
2) Wipe cache partition
3) Under advanced, wipe dalvik cache
4) Flashed the rom.
After rebooting for the first time, this happens(for every rom I tried):
The phone boots into the rom(the capacitive buttons get turned on) -> setup window is reached -> then the phone starts booting again->in further boots it reaches cm logo only and keeps on booting again and again.
I tried wiping data, cache partition, dalvik cache and reboot. None of it worked.
I flashed the roms again .But still stuck at bootloop.
Ps : I randomly took my sim out and did a complete wipe and the roms work fine!!!.
But with sim again, the same problem persists.
PLEASE HELP.THANKS IN ADVANCE.
Click to expand...
Click to collapse
Problem could be your simcard? How is that even possible. Try flashing with your sim out then insert it after the rom is installed.
SuperAce609 said:
Problem could be your simcard? How is that even possible. Try flashing with your sim out then insert it after the rom is installed.
Click to expand...
Click to collapse
I tried this after discovering the sim "problem" but it didn't work out.
bhumit22 said:
If you have installed any custon rom previous than i suggest you to first flash fresh ddkq8 stock and than try to install ur custom rom..
It might be happening because of previous rom data !
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
When i flashed my first custom rom(cm 7.1), i was on fresh ddkq8 stock rom. But the problem still occured.
Though i will give it a try again.
gb2793 said:
When i flashed my first custom rom(cm 7.1), i was on fresh ddkq8 stock rom. But the problem still occured.
Though i will give it a try again.
Click to expand...
Click to collapse
It would be a great advisable idea if you flash stock rom via odin every time when you want to switch from one cusom rom to other...
Sent from my GT-S5830 using xda app-developers app
bhumit22 said:
It would be a great advisable idea if you flash stock rom via odin every time when you want to switch from one cusom rom to other...
Sent from my GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
as told by you, I flashed stock rom and then rooted my phone, installed cwm and then flashed cm9.
I am still stuck on the boot loop...
PLZ HELP
gb2793 said:
as told by you, I flashed stock rom and then rooted my phone, installed cwm and then flashed cm9.
I am still stuck on the boot loop...
PLZ HELP
Click to expand...
Click to collapse
Did you mount the /system? Sometimes you have to do this.
Boot into CWM, mounts and storage > mount /system
Check to see that everything is mounted, sd-ext may or may not work, don't worry about it, it's a big in most CM9 ROMs
Hello guys, i have a Note on stock ICS 4.0.4 and i was using SpeedMod kernel untill a few minutes ago, but now i tried to flash HydraCore v7 Standard(From here https://www.dropbox.com/sh/tgt862w7t0dbbwf/wtCeOLxSsU/HydraCore 7 ) and after that my phone refuses to boot, it only gets to "Samsung Galaxy Note GT-N7000" screen but after that the screen just turns black and i need to remove the battery to try again or to go into CMW.
I tried to reflash the SpeedMod .zip but it doesn't work(The CMW version changes, but i still can't boot).
I'm a noob, brought my Note two months ago and i am an Android noob(Came from iOS).
Could someone here PLEASE help me?
Quimerinha said:
Hello guys, i have a Note on stock ICS 4.0.4 and i was using SpeedMod kernel untill a few minutes ago, but now i tried to flash HydraCore v7 Standard(From here https://www.dropbox.com/sh/tgt862w7t0dbbwf/wtCeOLxSsU/HydraCore 7 ) and after that my phone refuses to boot, it only gets to "Samsung Galaxy Note GT-N7000" screen but after that the screen just turns black and i need to remove the battery to try again or to go into CMW.
I tried to reflash the SpeedMod .zip but it doesn't work(The CMW version changes, but i still can't boot).
I'm a noob, brought my Note two months ago and i am an Android noob(Came from iOS).
Could someone here PLEASE help me?
Click to expand...
Click to collapse
Did you wipe cache and dalvik cache?
Next time read the threads for a new kernel or a new Custom Rom here in XDA and follow the installation instructions carefully. This reduces the chances of error dramatically.
But first try to clean the caches and reboot again.
Just wiped Dalvik Cache and Partition Cache but i still can't boot.
Quimerinha said:
Just wiped Dalvik Cache and Partition Cache but i still can't boot.
Click to expand...
Click to collapse
Please try the factoy reset.
As the poster before said: factory reset is a possibility.
But: only if you really sure you're using a recovery in a safe kernel. This should be from what you told before.
Another option I would try first:
So I would search for the Philz kernel for your ICS and install this first in CWM. Maybe you can boot with this into Android. If not this gives you a safe environment for factory reset or installing a new Rom
When you want revert from HydraCore v7 kernel you need to flash this:
http://forum.xda-developers.com/showpost.php?p=32806581&postcount=10783
After flashing this .zip, see if it boots properly, then you can try flash any other kernel that you want (speedmod, philz, or other version of HydraCore/Notecore)
Edit: oh I see this file isnt avilable anymore, so try this link:
https://docs.google.com/file/d/0B_a9lzwtDaN5VnNzME1YUWRKNVk/edit?usp=sharing
djoni_gitara said:
When you want revert from HydraCore v7 kernel you need to flash this:
http://forum.xda-developers.com/showpost.php?p=32806581&postcount=10783
After flashing this .zip, see if it boots properly, then you can try flash any other kernel that you want (speedmod, philz, or other version of HydraCore/Notecore)
Edit: oh I see this file isnt avilable anymore, so try this link:
https://docs.google.com/file/d/0B_a9lzwtDaN5VnNzME1YUWRKNVk/edit?usp=sharing
Click to expand...
Click to collapse
Thanks dude, you saved me!
Didn't need to do the factory resets, used this .zip and now i can boot. Think i will stay with that kernel for a while now Maybe later i get back to SpeedMod. But, anyway, thank you all for helping me out with this guys, I really appreciate it.
Hi,
I think I bricked my phone very well. I used Odin to put some GB Kernel in order to be able to upgrade to JB. Later I got into recovery mode and cleaned cache and many other things, but was unable to wipe data\factory reset, from there it all went down. I tried fixing it using this guide, but it didn't help. I still can get into download mode, though. And sometimes even into recovery, but it gives me tones of errors.
What can I do? How do I fix it now???
Thanks in advance!
Fix:
Try to flash a stock GB rom with Odin.
Kernel/ Upgrade to JB
After that flash a rooted kernel. Try CF-Root or Semaphore Kernel.
pila405 said:
Hi,
I think I bricked my phone very well. I used Odin to put some GB Kernel in order to be able to upgrade to JB. Later I got into recovery mode and cleaned cache and many other things, but was unable to wipe data\factory reset, from there it all went down. I tried fixing it using this guide, but it didn't help. I still can get into download mode, though. And sometimes even into recovery, but it gives me tones of errors.
What can I do? How do I fix it now???
Thanks in advance!
Click to expand...
Click to collapse
flash rom first, find ur own firmware, then flash rom using odin, if ur pet kernel first, there will be no rom to reset.
Sent from my GT-I9000 using xda premium
I indeed flashed stock GB, and managed to update to JB from there
Thank you very much guys!
pila405 said:
I indeed flashed stock GB, and managed to update to JB from there
Thank you very much guys!
Click to expand...
Click to collapse
Press the thanks button if someone helped you
Hi,
got one problem. hope im typing in right section.
Flashed my I9000 to 2.3.6 JVU plus CF-Root. Minutes later ive tried to flash Gamerzrom via CWM.
(done a full wipe / factory reset, wiped caches etc.).
After that Phone reboots and is stuck in a bootloop containing the Semaphore screen and i cannot
enter CWM again. I have to reinstall stock rom first and then root it again.
Dunno what im doing wrong at that point; am i using wrong kernel?
thanks in advance
that gamerzrom...2.3 or 4.2?
if u wanna flash to 4.x, need to flash cm9 first.flash twice, from 2.3 to cm9 to cm10.dont do shortcut please...
cm9 need to flash twice, bootloop will occur on first flash,use 3 button combo to go back to recovery,its da matter of releasing da 3 button,release it rite after u see da white sgs,if still cant, flash back firmware n redo step.
after flashing cm9, do not reboot,flash cm10 or gamerzrom,first flash will error,flash it back again n then reboot, do wipe everything except sd when in 2.3, and please...read first before asking