Accidental Calls from opening keyboard - Motorola Droid and Milestone General

Over the last few months I've lost some weight (so most of my shorts and pants are a little big now) and being the type of guy to put his phone in his pocket, I've been getting quite a few accidental calls.
Yes I am locking it 99% of the time. What happens is that I'm using a non-pattern unlock and while its moving around in my pocket my phone ends up opening the keyboard. What does this do? It wakes the screen. A little more tumbling around in my pocket = unlocked! and so on .
Is there a way to disable this? I can't seem to find one. I checked out an app called Confirm Call or something like that and it's just a button to confirm. Since it's just a button and not a pattern it'll just get tapped anyway in my pocket.
I'm trying to avoid using pattern lock as pattern lock make it tough to answer/check the phone at a traffic light or similar situations :-/

I think I've trawled the internet enough to know there doesn't seem to be a real way of doing this as far as disabling slider wake-up, and no dialers seem to use anything other than a Call Confirm button which would just be the same thing all over again, with one extra tap :-/.
There is one but doesn't seem to be able to disable slider wake up in 2.2/2.3 (or just 2.3)

What type of app do you want?
Elaborate what you need so people may help you.
You can try using slider only. Try if you can keep only one letter password and also disable press ok button after entering password.
Sent from my Milestone using XDA App

What I think would essentially work is an app or way by script that;
Disables slider-open screen wake.
I've searched about this and there doesn't seem to be a way that works on GB, only for eclair and maybe froyo.
In the mean time I've just realised that I could just put the dialer on a different bottom shortcut row . At least it makes it really difficult to make accidental calls but doesn't solve the whole unlocking-in-pocket problem I have and judging by the posts about it, quite a few others too.

Related

Kaiser problems

Hello!
I have came across 2 annoying problems - maybe somebody can help with them.
1) Pressing IE key + action (dpad center key) invokes screen alignment application. I'm using S2U2 and can't find a way to prevent this shortcut from working when phone is locked by S2U2. Because of that screen alignment is accidentally launched often enough to become major annoyance.
Is there any way to fix it? Like disabling screen alignment shortcut, configuring S2U2 to lock hardware keys or in the worst case fully disabling IE key ?
2) The second problem - sometimes i find my kaiser switched to landscape mode. It has happened only when i'm reaching for phone in pocket to answer a call - so it's possible i've accidentally pressed some keys or something. It happened also after i disabled autoswitching to landscape mode after sliding it open.
Of course after it has switched to landscape mode it switches back to portrait, and during this time (which can take few secs and is annoying) i cannot answer the call.
For #1 - stop pressing the IE and Action key at the same time. Pretty simple fix.
For #2 - I don't really have a good answer for you. I would have suspected you were opening the keyboard slightly when pulling it from your pocket, but that wouldn't matter if you disabled the function. So, can't say for sure... are you running 3rd party apps, different ROM, etc.?
raywiper said:
Hello!
I have came across 2 annoying problems - maybe somebody can help with them.
1) Pressing IE key + action (dpad center key) invokes screen alignment application. I'm using S2U2 and can't find a way to prevent this shortcut from working when phone is locked by S2U2. Because of that screen alignment is accidentally launched often enough to become major annoyance.
Is there any way to fix it? Like disabling screen alignment shortcut, configuring S2U2 to lock hardware keys or in the worst case fully disabling IE key ?
2) The second problem - sometimes i find my kaiser switched to landscape mode. It has happened only when i'm reaching for phone in pocket to answer a call - so it's possible i've accidentally pressed some keys or something. It happened also after i disabled autoswitching to landscape mode after sliding it open.
Of course after it has switched to landscape mode it switches back to portrait, and during this time (which can take few secs and is annoying) i cannot answer the call.
Click to expand...
Click to collapse
What you are describing as annoying are conveniences to those of us who don't carry our phones in our pockets. No, HTC does not make double commands for every function, one to make the phone easier to use and one to disable all the " easy " functions for those who insist on carrying around a $500 phone like it was a pack of 25 cent gum.
A little preachy? Good!
Ask the other members here if this sounds familiar: "Cheap f**king phone, screen cracked first week I had it, I took it out of my pocket one day.........." My touch screen no longer works, I took it out of my pocket one day............"
50% of all the bad things that happen to people's phones around here start with. "When I took the phone out of my pocket........"
Want your phone to continue to work great? Make believe it is an expensive piece of electronics. Take f**king care of it
P.S. Ooh big step down off the soap box
denco7 said:
What you are describing as annoying are conveniences to those of us who don't carry our phones in our pockets. No, HTC does not make double commands for every function, one to make the phone easier to use and one to disable all the " easy " functions for those who insist on carrying around a $500 phone like it was a pack of 25 cent gum.
A little preachy? Good!
Ask the other members here if this sounds familiar: "Cheap f**king phone, screen cracked first week I had it, I took it out of my pocket one day.........." My touch screen no longer works, I took it out of my pocket one day............"
50% of all the bad things that happen to people's phones around here start with. "When I took the phone out of my pocket........"
Want your phone to continue to work great? Make believe it is an expensive piece of electronics. Take f**king care of it
P.S. Ooh big step down off the soap box
Click to expand...
Click to collapse
*sniffs* hmm whats that smell, its the buring of you being flamed BIG TIME
denco7 said:
Ask the other members here if this sounds familiar: "Cheap f**king phone, screen cracked first week I had it, I took it out of my pocket one day.........." My touch screen no longer works, I took it out of my pocket one day............"
50% of all the bad things that happen to people's phones around here start with. "When I took the phone out of my pocket........"
Click to expand...
Click to collapse
I'm not so sure, maybe some people are just careless fools.
I've had my Kaiser for a few months and a Wizard before than for 18 months. Both have been kept in my pocket pretty much constantly and have never had anything more than the slightest of scratches on the casings.
Then again, i'm not stupid enough to keep my phone in the same pocket as coins, keys or other myriad sharp things...
MrHorus said:
I'm not so sure, maybe some people are just careless fools.
I've had my Kaiser for a few months and a Wizard before than for 18 months. Both have been kept in my pocket pretty much constantly and have never had anything more than the slightest of scratches on the casings.
Then again, i'm not stupid enough to keep my phone in the same pocket as coins, keys or other myriad sharp things...
Click to expand...
Click to collapse
Where as a lot of other people unfortunately are
Well, to give you a tip about question #2 if you are going to carry it in the beltcase that came with the phone. If you are not careful pusing the phone up of the case you might just push the keyboard part and it doesn´t take much to trigger landscape mode. By now I get the phone up without this happening but it took some getting used to.
And I would not advise carrying the phone in your pants front pocket. A friend of mine cracked the screen of his brand new N95 this way, tight designer jeans pocket in this case = dead expensive phone.
denco7 said:
Want your phone to continue to work great? Make believe it is an expensive piece of electronics. Take f**king care of it
Click to expand...
Click to collapse
And what should i do ? Keep it home on the shelf ? A phone is meant to use it. I've found that the screen is hard to clean because of the higher edges. What would be your solution - don't touch it ? The phone is slow when switching to landscape and back - don't use landscape mode ? If something is wrong - it's my fault for trying to use it ?
*rant off*
Actually i was not correct (blame my english) - i'm carrying it in a waist case, not pocket. And from what i've gathered - the magnetic lock could be the reason of switching to landscape mode. I've read something about magnetic locks triggering the slideout sensor.
But my collegue said he disabled autoswitching to landscape mode and was still experiencing this problem (have to doublecheck it though).
As for first case (screen align shortcut) - can't help. I often accidentally press them when taking out of case. Tried to install AEBPlus and remap some buttons, but that didn't help. It actually suprises me why HTC choosed so easily pressed button combination.
A solution would be to stop using S2U2, as the default device lock correctly locks the keypad and this shortcut dosesn't work. It would be pity though, as i came to like S2U2.
[WARNING]
Don't flame each other
If you have a solution post it, otherwise keep quiet
The OP posted a legitimate question, if you don't have an answer, or think the questing is silly, then don't post and leave the thread alone
[/WARNING]

(REQUEST) Disabling Auto-lock

This one aspect of my phone has been really bugging me. We don't have the option to disable the automatic locking of our phones. You could enable an infinite screen timeout, but that doesn't really solve the problem as it introduces a new problem (increased drain on the battery due to the display being on the whole time).
It'd be nice if we could control those two settings independently. One is to be able to control screen timeout, the other would be to enable/disable autolocking our phones.
The reason this is useful for someone like me is that I usually leave my phone on the desk when I'm not using it. In my situation the auto-locking is just a huge pain because I'm not worried about accidentally hitting any buttons while the phone is on the desk nor am I worried about security/privacy issues.
Anyone see a need?
I think lockbot gives you an option of how long before the lock screen goes into affect if you'd be willing to use an app for a lock screen...
erikikaz said:
This one aspect of my phone has been really bugging me. We don't have the option to disable the automatic locking of our phones. You could enable an infinite screen timeout, but that doesn't really solve the problem as it introduces a new problem (increased drain on the battery due to the display being on the whole time).
It'd be nice if we could control those two settings independently. One is to be able to control screen timeout, the other would be to enable/disable autolocking our phones.
The reason this is useful for someone like me is that I usually leave my phone on the desk when I'm not using it. In my situation the auto-locking is just a huge pain because I'm not worried about accidentally hitting any buttons while the phone is on the desk nor am I worried about security/privacy issues.
Anyone see a need?
Click to expand...
Click to collapse
Well... I'll answer your question... But this won't be helpful (Just a warning )
A need? No.. I honestly don't find it troublesome to swipe my finger across the screen after pressing the trackball (or Power button if you're not rooted/haven't setup Trackball Wake)
So, I don't really see a need. But good luck finding someone to accomplish your request. Just seems like it'd be a fair amount of work, to remedy 1 seconds time... Just my $.02
Try ScreenModeWidget at market, free.
choose awake stay.
Try ScreenModeWidget at market, free.
choose awake stay.
Look in the market for "curvefish" he's a developer of widgets and has a lock screen on off widget that will let you turn it off then back on without having to reset the pattern. Hope that helps!
Keyguard disabler on the market. It works for me. I set it after a reboot and it works. It has a option to start on start but I just do it manually with the shortcut.
actually, i've been looking for the same solution as you are looking for! even i find it highly anoying when i keep the fone on my desk and have to sweep the screen each time i want to check it.
ideally, i'm looking for something likr what u get in the 5800.... the screen comes back on (after timning out) when you tap on the screen, unless u lock it explicitly via the hardware button...
neways, u kud try "no luck" which simply disables the lock screen. when the screen times out, pressing the hardware "home' or "lock/unlock" buttons brings the screen back on without having to go thru the unlock procedure...
Cheers,
I've been using touchscreen smartphones since the Omnia came out and never once have i needed a lock screen. I can't for the life of me work out why anyone would need anything more than a screen off/screen on button.
I'm using No Lock from the market now. It has a handy toggle widget/icon for enabling or disabling the lock function. As a bonus it allows screen wake on Trackball and volume buttons.
+1 for No Lock! It's the best way to get around that swipe pain.

This device drives me nuts

Is there ANYTHING I can do to make this device work in a sensible way?
I mean I find it deeply unsettling that I have yet to see anyone else complain about the huge design flaw this phone has.
That being, when I receive a call, the touch screen activates at the slightest touch. That doesn't make sense because I don't tie it to my wrist... I carry it in my pocket or my belt clip and even in my belt clip it presses random spots on the touch screen. I want it to not do that, first of all. In fact I don't want the phone to even turn on touch activation until I give it clearance to turn on, because otherwise it will stay there and randomly press buttons until I check my phone and realize someone called me an hour ago.
Because that's the thing—I need it on vibrate a vast majority of the time, I can't feel it vibrate but it'll open random programs or do random crap. I can always tell because whenever I decide to reach down and check my phone I feel it overheating, and I think, "Yup. Someone called me and I didn't hear or feel it vibrate." That's actually ridiculous. That's severely headache inducing at how completely backwards it is without the option to change it in settings. At least not that I've seen. As I've said, no one else is complaining about it... so what are you guys doing?
I'm sorry but as I said, this phone drives me nuts. I can't help but feel angry just by talking about it.
Actually you could either turn on the screen lock so that even if it turns on, it's locked and none of the buttons or screen touching will do anything, and the machine will turn itself off after a while.
Or,
you can install BSB tweaks and set it so that the phone doesn't turn on unless you tell it to.
Most of the time it's not the device, it's the user. Especially obvious when reading user reviews and most users claim features don't exist when in fact they never found them. Or phone is capable of certain things, but the user is not only unaware, they are angry the features are not there.
GET TO KNOW YOUR DEVICE or use available tweaks and information
use a loud ringtone, use vibrate, use a screenlock program... (S2U2 is excellent, but you may find it complex).
Or extend the phone ring time before it goes into voicemail (that's in phone settings I recall)
The phone is not perfect, but it can very easily be configured to avoid accidental answering or not noticing the call in the first place. That said, the standard options are not good...
To be fair, I'm not stupid, but I am pretty ignorant when it comes to stuff like this. Bear in mind I've been using an old flip phone for the majority of my life, and I've spent a good amount of time looking through my X1 for a setting that would make my phone work better. I've found nothing that would keep the touch screen off for incoming calls or texts, which genuinely irks me.
Yes I tried locking the phone for a while, but it's a pain getting a call and then not being able to answer in time because I notice it late, pull it out, and then have to unlock it to answer. Also, locking the phone didn't stop the touch screen from turning on and pressing random buttons... it was just that with it locked there were no buttons to press except the digit code and I might be right to guess that my phone would lock me out completely if I randomly hit the wrong buttons enough times. Also the backlight was draining the battery and it was overheating anyway. It didn't make a difference.
I also spent a generous amount of time on the internet looking for solutions, but as I've said, no one else seems to have had my problem, so I was certain I wouldn't find a solution until I asked for myself. Believe me, I wouldn't have posted anything here if I'd found one.
Anyway I'll try "tweaking" it as was suggested. Thanks for the help.
(Also bear in mind having to "tweak" a device DOES suggest it was badly designed in the first place, which was kind of my point. Paul C knows what I'm talkin' 'bout.)
Peace.
Faceeat said:
To be fair, I'm not stupid, but I am pretty ignorant when it comes to stuff like this. Bear in mind I've been using an old flip phone for the majority of my life, and I've spent a good amount of time looking through my X1 for a setting that would make my phone work better. I've found nothing that would keep the touch screen off for incoming calls or texts, which genuinely irks me.
Yes I tried locking the phone for a while, but it's a pain getting a call and then not being able to answer in time because I notice it late, pull it out, and then have to unlock it to answer. Also, locking the phone didn't stop the touch screen from turning on and pressing random buttons... it was just that with it locked there were no buttons to press except the digit code and I might be right to guess that my phone would lock me out completely if I randomly hit the wrong buttons enough times. Also the backlight was draining the battery and it was overheating anyway. It didn't make a difference.
I also spent a generous amount of time on the internet looking for solutions, but as I've said, no one else seems to have had my problem, so I was certain I wouldn't find a solution until I asked for myself. Believe me, I wouldn't have posted anything here if I'd found one.
Anyway I'll try "tweaking" it as was suggested. Thanks for the help.
(Also bear in mind having to "tweak" a device DOES suggest it was badly designed in the first place, which was kind of my point. Paul C knows what I'm talkin' 'bout.)
Peace.
Click to expand...
Click to collapse
First of all tweaking does not mean a phone was badly designed, tweaking or modding gives the option to add, remove, or change anything you want in your phone. With your logic every smart phone was badly design becuase everybody tweaks their phones. And what you are saying makes no freaking sense. How can you not answer a call when your phone is lock, the incoming call pops up on the screen? How is your phone turning on and pressing random buttons when it's locked lol? How about you give more info on what rom you are using becuase what your saying makes no dam sense.
Oh, come on, man. It was my first smart phone. If I wasn't giving it the benefit of the doubt that I COULD do something about my issues, I would've taken the phone back. Instead I posted here and asked, because I was fed up using the search function trying to figure out what I was doing.
With your logic every smart phone was badly design becuase everybody tweaks their phones.
Click to expand...
Click to collapse
I'm sure most people don't tweak their phone to fix rudimentary issues that cripple the usability of the phone.
Don't get me wrong, I'm GLAD my issue can be fixed, and thank you. I'm just saying. I didn't know, and the result of not being able to figure it out was me being upset with the device.
Do you want to continue this pointless argument or can we just drop it now?
How can you not answer a call when your phone is lock, the incoming call pops up on the screen? How is your phone turning on and pressing random buttons when it's locked lol?
Click to expand...
Click to collapse
The screen turns on regardless of whether or not it's locked. It rings, and the screen turns on, but instead of allowing you to answer right away, it prompts you for the pin to unlock it. So I CAN answer a call, just sometimes not fast enough because of factors I already specified.
And if I'm not aware I'm being called, when I miss the call the screen stays on in my belt clip, and every time the screen is touched, the backlight remains on. Since it keeps being touched, it never shuts off. And the only buttons on the screen are the pinpad numbers, so it just hits those instead. This is how I got the phone.
So, since whether I lock it or not I get the same annoyances, I choose not to lock it.
Also I have yet to find a tweak that keeps the phone's touch response off for receiving calls, and turns off the screen entirely when or if the call is missed. I would really benefit from something like that to prevent it opening random programs or texting landlines with "aufgfdjkw"...
I'll keep looking.
Faceeat said:
Oh, come on, man. It was my first smart phone. If I wasn't giving it the benefit of the doubt that I COULD do something about my issues, I would've taken the phone back. Instead I posted here and asked, because I was fed up using the search function trying to figure out what I was doing.
I'm sure most people don't tweak their phone to fix rudimentary issues that cripple the usability of the phone.
Don't get me wrong, I'm GLAD my issue can be fixed, and thank you. I'm just saying. I didn't know, and the result of not being able to figure it out was me being upset with the device.
Do you want to continue this pointless argument or can we just drop it now?
The screen turns on regardless of whether or not it's locked. It rings, and the screen turns on, but instead of allowing you to answer right away, it prompts you for the pin to unlock it. So I CAN answer a call, just sometimes not fast enough because of factors I already specified.
And if I'm not aware I'm being called, when I miss the call the screen stays on in my belt clip, and every time the screen is touched, the backlight remains on. Since it keeps being touched, it never shuts off. And the only buttons on the screen are the pinpad numbers, so it just hits those instead. This is how I got the phone.
So, since whether I lock it or not I get the same annoyances, I choose not to lock it.
Also I have yet to find a tweak that keeps the phone's touch response off for receiving calls, and turns off the screen entirely when or if the call is missed. I would really benefit from something like that to prevent it opening random programs or texting landlines with "aufgfdjkw"...
I'll keep looking.
Click to expand...
Click to collapse
For the 2nd time what rom are you using? 6.1 or 6.5? If it keeps being touched on your belt clip why not just keep your phone in your pocket instead? Also what is your backlight power time settings, like what is the time intervals of when you screen shuts off? Also maybe the latest version of the lock app S2U2 V2.41 might solve your problems. I've had my phone for 8 month's and have never experienced what you are saying or herd of but then again I don't keep my phone on a beltclip I keep it in my pocket. It sounds like S2U2 2.41 should help because it gives access to those options you want to change in the S2U2 settings.
This seems to be a rom problem. My phone does nothing you described. After the screen goes off it does not react to any touching of the screen at all. When its in standy mode (screen off) and a call comes in it reactivates the screen and the call can be answered either by touching the corresponding area of the screen or by pressing the green hardware button. The same behaviour can be witnessed when I lock the phone prior to the screen turning off. So I can say I have never experienced problems like you. My phone runs the latest stock rom for Switzerland (German) and is not branded.
altae said:
This seems to be a rom problem. My phone does nothing you described. After the screen goes off it does not react to any touching of the screen at all. When its in standy mode (screen off) and a call comes in it reactivates the screen and the call can be answered either by touching the corresponding area of the screen or by pressing the green hardware button. The same behaviour can be witnessed when I lock the phone prior to the screen turning off. So I can say I have never experienced problems like you. My phone runs the latest stock rom for Switzerland (German) and is not branded.
Click to expand...
Click to collapse
My phone is the same way but I'm on a custom rom. He might have to flash is phone if nothing else works.
Faceeat said:
I'm sure most people don't tweak their phone to fix rudimentary issues that cripple the usability of the phone.
Click to expand...
Click to collapse
Everyones different, every one wants something to work a little differently.
Faceeat said:
The screen turns on regardless of whether or not it's locked. It rings, and the screen turns on, but instead of allowing you to answer right away, it prompts you for the pin to unlock it. So I CAN answer a call, just sometimes not fast enough because of factors I already specified.
And if I'm not aware I'm being called, when I miss the call the screen stays on in my belt clip, and every time the screen is touched, the backlight remains on. Since it keeps being touched, it never shuts off. And the only buttons on the screen are the pinpad numbers, so it just hits those instead. This is how I got the phone.
So, since whether I lock it or not I get the same annoyances, I choose not to lock it.
Also I have yet to find a tweak that keeps the phone's touch response off for receiving calls, and turns off the screen entirely when or if the call is missed. I would really benefit from something like that to prevent it opening random programs or texting landlines with "aufgfdjkw"...
I'll keep looking.
Click to expand...
Click to collapse
As mentioned previously there are many alternitive unlocking programs
Slide to unlock 2 (S2u2) is very good, customisable and free.
Here is the website http://ac-s2.com/ you can also find threads about it on XDA Developers.
I am currently using Throttle lock, Provides extra security without having to use pins, customisable, and free here is the website http://www.throttlelauncher.com/portal/Products/ThrottleLock/throttlelock-09
Once again you can find threads about it on XDA Developers.
to use either of these programs, just download the .cabs from the websites, transfer them to your phone and click on them to begin installation.
hope that helps.
For the 2nd time what rom are you using? 6.1 or 6.5?
Click to expand...
Click to collapse
6.1
Everyones different, every one wants something to work a little differently.
Click to expand...
Click to collapse
Yes, but I'm pretty sure no one wants their phone wasting batteries.
If it keeps being touched on your belt clip why not just keep your phone in your pocket instead?
Click to expand...
Click to collapse
What difference would that make? I keep other things in my pocket that are probably more likely to hit the touch screen. Besides, I got the phone before I got a belt clip. It was in my pocket first. I thought the belt clip would make it better. Since it doesn't I still prefer the belt clip for the phone's accessibility.
Also what is your backlight power time settings, like what is the time intervals of when you screen shuts off?
Click to expand...
Click to collapse
On that screen in the settings there's an option to turn off the device after a certain amount of time. Before, when I was in those settings, I had it unchecked, thinking it would turn the phone off completely. But it does exactly what I want—it disables the touch screen after a minute.
Still, that's not a perfect solution, but it helps a lot. That plus the lock app should make it well within working standards. Thank you.
SORRY FOR WASTING YOUR TIME GUYS. I take back what I said. I'm now an enlightened individual. I can build rainbows with my mouth.
Faceeat said:
Is there ANYTHING I can do to make this device work in a sensible way?
I mean I find it deeply unsettling that I have yet to see anyone else complain about the huge design flaw this phone has.
That being, when I receive a call, the touch screen activates at the slightest touch. That doesn't make sense because I don't tie it to my wrist... I carry it in my pocket or my belt clip and even in my belt clip it presses random spots on the touch screen. I want it to not do that, first of all. In fact I don't want the phone to even turn on touch activation until I give it clearance to turn on, because otherwise it will stay there and randomly press buttons until I check my phone and realize someone called me an hour ago.
Because that's the thing—I need it on vibrate a vast majority of the time, I can't feel it vibrate but it'll open random programs or do random crap. I can always tell because whenever I decide to reach down and check my phone I feel it overheating, and I think, "Yup. Someone called me and I didn't hear or feel it vibrate." That's actually ridiculous. That's severely headache inducing at how completely backwards it is without the option to change it in settings. At least not that I've seen. As I've said, no one else is complaining about it... so what are you guys doing?
I'm sorry but as I said, this phone drives me nuts. I can't help but feel angry just by talking about it.
Click to expand...
Click to collapse
Maybe a magnet on your belt phone keeper
turns on the phone...........
Recently I also discovered that keeping X1 close to a second mobile phone MAKES X1 randomly open apps by itself....
Crazy but true!!!!
Once somebody calls you and quits,
without your reaction there's no way you can activate anything if your phone is locked with a code....
A short press of the power button suspends the screen? lol.
I was about to say it but sean0r beat me to it (by weeks lol)
I felt the same thing when I first bought the phone (1-2 hours).
I just usually set my backlight to turn off after 10-30 secs. (Settings->Power->Advance Tab)
And I also don't use the lock feature since I think it's more of a hassle then to just turn the screen off (power button, like sean0r said) then turn the screen on again when I'm about to use it. It basically does the same thing like the lock/unlock button, it help prevents unwanted screen touch, only I feel it's way way more faster than the unlock button (even if you configured the lock/unlock button, to lock quicker).
And since you're new, if you haven't used any of the great custom ROMs you should definitely try it!! Read the guides carefully though, I warn you it might be addictive =D
The custom ROMs and this great XDA community is what made me keep this phone despite this phone's poor poor poor poor poor...I mean horrible build quality! Sony should thank these guys...seriously...
Sorry for bumping an old thread...
I'll rebump - flash Mr. Rusch's Touch X ROM if you are a noob. It is slick, stable, and well configured by default.
It isn't the flashiest, but it is stable and convenient. I highly recommend for beginners.
Sounds like you're using the actual security lock with password, try just using the keylock where you slide it to use it. (Like iphone)
regardless, I think you should flash energie rom on your phone.
Ive flashed many many roms including spikegottis, 826x, and even various Titanium roms but energie is the best overall for speed, apps and reliability

[Q] dual answering window

How come I sometimes see buttons, and sometimes has to use slider to answer? This is bugging me of totally.
I've had this problem from the start with stock rom to cooked rom!
No one has this problem too? I prefer the slider, and would want that to Always display. Cause when the phone is in my pocket it tends to answer or decline calls
I have the same thing. I believe it's because when your phone is locked, it's the slider. When it's not locked, there's the buttons
There must be a solution to this; I hope. I want to use sliders only, since the phone answers itself when in pocket and the buttons are on display.
Well its the way it is because when it's in your pocket, it should be locked, therefore activating the slider feature... I'm sure there is a way to always use the slider...
firesting said:
Well its the way it is because when it's in your pocket, it should be locked, therefore activating the slider feature... I'm sure there is a way to always use the slider...
Click to expand...
Click to collapse
The problem for me is that it's answering while I take it up, so I rarely have a moment to see if it's slider or buttons. But when it's on the table it's mostly slider. Hate the buttons. But with an app I use (full screen caller id) I get to slide, but the problem is while answering I have to slide through the app and then either slide again or push the button. Which is killing me... have written to the app developer about this a week ago, with no answer or update. So how do I change so I always use default answering mode as slider??

Button-less Wake!

The main defect with the Note 3 is that it requires a button-press to wake-up.
Let this thread be a collective bounty of alternative solutions until we can Slide2Wake which requires kernal changes and AT&T to unlock the bootloader.
Sign this petition in the meantime while you read on:
http://www.change.org/petitions/at-t-unlock-our-samsung-galaxy-note-3-bootloader
Working solutions:
-Use a proximity sensor app (very hit and miss) (https://play.google.com/store/apps/details?id=com.omd.autoscreenon&hl=en)
-Use the S View cover (also hit and miss and unpreferred by many)
Any other solutions please add!
Why would you want a huge wake lock like that? A simple press of the home button is much easier IMHO. I'd rather not have to swipe across the screen to turn the screen on
RErick said:
Why would you want a huge wake lock like that? A simple press of the home button is much easier IMHO. I'd rather not have to swipe across the screen to turn the screen on
Click to expand...
Click to collapse
You're right. It's a considerable battery drain. The surprising thing is.. in the end, the smoothness of button-free operation becomes *worth it* IMHO.
I turn my phone on and off a lot to check stuff. I'll look at my to do list then press the corner SwipePad shortcut to turn it off. Then I'll remember something while moving up a bit in the line and **without even looking down for a button** and half-entranced in contemplation still I'll swipe from one side of the phone to halfway to the other and it is ON by the split second both my hands hold it to to make a note or reminder, look up something, etc. after which i'll immediately press the corner shortcut again to turn it off and my phone stays in one hand while I people-watch.
For some reason this is much more relaxed and makes me feel like the phone is like a second brain where I don't even need to create mnemonic devices called loci as much like I used to.
Maybe that's what's making my memory kind of crappy. Maybe should go back to doing that for my to-do lists. Might improve my memory. ANYWAY. my point is:
(1) it's less mechanical effort to swipe and
(2) I like to save my buttons and don't want to eventually have to replace the home button on the Note 3 for like $50 or whatever.
I guess it's not that big a deal.
If I did have that feature though I wouldn't miss anything else from past phones especially since the Note 3 is big enough to fit in one hand BARELY and could do a HALF-swipe to wake feature.
**pretends to do it now**
I'm crazy.
I would like a solution to this as well. Tried the light sensor app but that wasnt working well. Really wish we had tap-on.
I really like not hitting any physical buttons because this phone is huge and unwieldy. Still love it though.
https://play.google.com/store/apps/details?id=com.spazedog.xposed.additionsgb
I assigned the power button to holding down the back button. That saves a little bit of button-life.
The app also is designed to support the same while the screen is off... but it doesn't seem to work yet.
Would be super awesome though to be able to turn the screen off and on while the back button is held. Just not there yet.
Screen on with swipe is the next best.. though much more battery intensive.
Has anyone just simply tried pressing the simple wake button on the side of the phone once? I mean you already have your hand on it most of the time since it is where your fingers are if you are holding the phone in one hand.
Also for you slider guys, it takes many more muscles to frown and it is the same to slide. Much better to smile and press one single button already under your thumb when you are holding the phone.
Solarenemy68 said:
Has anyone just simply tried pressing the simple wake button on the side of the phone once? I mean you already have your hand on it most of the time since it is where your fingers are if you are holding the phone in one hand.
Also for you slider guys, it takes many more muscles to frown and it is the same to slide. Much better to smile and press one single button already under your thumb when you are holding the phone.
Click to expand...
Click to collapse
Congratulations Captain Obvious. You are the first person to ever think of that!
/\/\ sarcasm /\ /\
Read above about my experience with button-less waking in the SGS2.
Besides that, you're wrong, my thumb is actually closer to the screen than the power button when I am holding it.
And it's no effort at all. That's the whole point. It's the same slide necessary in receiving a call. No physical PUSHING required.
I can turn my phone on twice per second easily by linking one of the touch buttons to "power" as well. With zero concern for screwing up any physical buttons.
Anyway please only write in this thread if you have something that will contribute to the idea of "button-less wake"
I'm only looking for creating solutions to that.
megamorphg said:
I can turn my phone on twice per second easily by linking one of the touch buttons to "power" as well. With zero concern for screwing up any physical buttons.
Click to expand...
Click to collapse
Well it looks like you've solved your own problem right? So should this be closed? I'll answer my own question, yes
Sent from my SM-N900A using xda app-developers app
Roundtableprez said:
Well it looks like you've solved your own problem right? So should this be closed? I'll answer my own question, yes
Sent from my SM-N900A using xda app-developers app
Click to expand...
Click to collapse
I'm talking about my SGS2 (last phone).
If Note 3 has a button-less wake feature then can close this.
I think that won't happen till ATT lifts the lock tho..
Best buttonless Wake Achieved
S View cover
P.s.: for those who prefer a different case: just wait till bootloader is unlocked > kernel unlocked > slide function can be made.
thread closed.

Categories

Resources