Related
*Update: These instructions now seem to be outdated. I will started an updated thread here: http://forum.xda-developers.com/showthread.php?t=648045
------------
(sorry I tried to post some live links, but the forum won't allow them cause I'm a new user, so this may not be as helpful as I hoped...)
I just spent some hours wading through the forums to find complete instructions for installing the newer android builds using the WM haret.exe linux booter (rather than flashing the entire phone and loosing WM) on my touch Vouge.
I am a bit of a newb, but since I did not find complete instructions, and had to figure some things out using trial and error I thought I would post what I did figure out here in hopes of helping others.
First ignore the install instructions here. sourceforge.net/apps/trac/androidhtc/wiki/HowToInstall . They are old and need to be updated.
Erase all previous android files from your sd card
Go here: sourceforge.net/projects/androidhtc/files/
haretinstall.zip
open the zip and place the andboot folder and all its contents on the / directory of your SD card
then download eclair252_androidinstall.zip
unzip eclair252_androidinstall.zip to get androidinstall.tar
copy androidinstall.tar to your sdcard /andboot folder
(unnecessarily steps deleted - see below)
Then on your phone's file explorer run haret.exe from /andboot folder on you sd card
click run and immediately hold the volume switch up as linux boots
the boot menu appears. choose install
if the installation hangs hold volume up again, and choose quit
As I said I'm new at this, so my instructions may be off or misguided. If so please post with corrections. I just know I was looking for a guide like this and couldn't find one so hope this helps someone.
umbilicalbungee said:
(sorry I tried to post some live links, but the forum won't allow them cause I'm a new user, so this may not be as helpful as I hoped...)
I just spent some hours wading through the forums to find complete instructions for installing the newer android builds using the WM haret.exe linux booter (rather than flashing the entire phone and loosing WM) on my touch Vouge.
I am a bit of a newb, but since I did not find complete instructions, and had to figure some things out using trial and error I thought I would post what I did figure out here in hopes of helping others.
First ignore the install instructions here. sourceforge.net/apps/trac/androidhtc/wiki/HowToInstall . They are old and need to be updated.
Erase all previous android files from your sd card
Go here: sourceforge.net/projects/androidhtc/files/
download basefiles.zip
open the zip and place the andboot folder and all its contents on the / directory of your SD card
then download eclair252_androidinstall.zip
unzip eclair252_androidinstall.zip to get androidinstall.tar
copy androidinstall.tar to your sdcard /andboot folder
then download vogueeclairnbh.zip
unzip vogueeclairnbh.zip to get VOUGIMGx480.NBH
copy VOUGIMGx480.NBH to your sdcard /andboot folder
Then on your phone's file explorer run haret.exe from /andboot folder on you sd card
click run and immediately hold the volume switch up as linux boots
the boot menu appears. choose install
if the installation hangs hold volume up again, and choose quit
As I said I'm new at this, so my instructions may be off or misguided. If so please post with corrections. I just know I was looking for a guide like this and couldn't find one so hope this helps someone.
Click to expand...
Click to collapse
Actually, you just answered my question (which I never posted) about NoRootFS.... Thanks for posting this!!!!
THANK YOU!!!
can you explain what is the benefits of doing it this way compared to the way its always been for me. it was as simple as downloading the sqsh package zip file from my favorite build here. witch included all the files i needed to run anroid. I copied the android folder from the zip file to the root of my sd card and simply ran haret exe. It used to be complicated but not now that most builds include all the basefiles needed for boot. I never had to hold any volume buttons or install anything. i probably look dumb for asking this.
incubus26jc said:
can you explain what is the benefits of doing it this way compared to the way its always been for me. it was as simple as downloading the sqsh package zip file from my favorite build here. witch included all the files i needed to run anroid. I copied the android folder from the zip file to the root of my sd card and simply ran haret exe. It used to be complicated but not now that most builds include all the basefiles needed for boot. I never had to hold any volume buttons or install anything. i probably look dumb for asking this.
Click to expand...
Click to collapse
Although I have not yet tried myself because I have a Polaris and WiFi is not yet working, my understanding is that NoMoRootFS makes more space available for the ROM and makes it easier for developers to roll out updates. In the thread for Myn's (most excellent) Warm Donut, there are several themes and updates that can only be applied to Rev2 if you have installed via NoMoRootFS.
umbilicalbungee said:
First ignore the install instructions here. sourceforge.net/apps/trac/androidhtc/wiki/HowToInstall . They are old and need to be updated.
Erase all previous android files from your sd card
Go here: sourceforge.net/projects/androidhtc/files/
download basefiles.zip
open the zip and place the andboot folder and all its contents on the / directory of your SD card
then download eclair252_androidinstall.zip
unzip eclair252_androidinstall.zip to get androidinstall.tar
copy androidinstall.tar to your sdcard /andboot folder
[*]then download vogueeclairnbh.zip
[*]unzip vogueeclairnbh.zip to get VOUGIMGx480.NBH
[*]copy VOUGIMGx480.NBH to your sdcard /andboot folder
Then on your phone's file explorer run haret.exe from /andboot folder on you sd card
click run and immediately hold the volume switch up as linux boots
the boot menu appears. choose install
if the installation hangs hold volume up again, and choose quit
Click to expand...
Click to collapse
I think that this step is not needed. The NBH files were made for flash your phone. If you run Haret is not needed.
Am I right?
ryomahino said:
I think that this step is not needed. The NBH files were made for flash your phone. If you run Haret is not needed.
Am I right?
Click to expand...
Click to collapse
correct. with the OP method, the .nbh file is just taking up space. you never need to do anything with a .nbh file if you are using haret. OP, please fix and I will add to my list of FAQs, otherwise very informative. thx.
Help
I can't get this to boot on my Vogue. The black Linux screen pops up & starts running but stops. The last line says...
[ 2.226233] Rebooting in 3 seconds.._
I've followed your instruction to the letter & can't see to get it to work. Anyone have suggestions?
Emmie0702 said:
I can't get this to boot on my Vogue. The black Linux screen pops up & starts running but stops. The last line says...
[ 2.226233] Rebooting in 3 seconds.._
I've followed your instruction to the letter & can't see to get it to work. Anyone have suggestions?
Click to expand...
Click to collapse
Did you get into the install menu by holding volume up? easiest and quickest way to help you is if you describe exactly what you did - I know it is similar to the OP, but just give a step by step in your own words.
I did all of the steps but linux boot stops at : failed to reach system.img on SD Card...
tatnai said:
Did you get into the install menu by holding volume up? easiest and quickest way to help you is if you describe exactly what you did - I know it is similar to the OP, but just give a step by step in your own words.
Click to expand...
Click to collapse
Did didn't get past the Linux menu. It only ran for about 4 or 5 seconds then locked up. I had to soft reset to get my phone functioning again.
I did exactly what the instructions in the 1st post said to do.
Downloaded andboot file to \storage card\andboot
Downloaded androidinstall.zip & placed in the andboot file
Clicked haret.exe
Selected run while holding up the volume key
I read in the post that the below items were not necessary so I skipped them:then download vogueeclairnbh.zip
unzip vogueeclairnbh.zip to get VOUGIMGx480.NBH
copy VOUGIMGx480.NBH to your sdcard /andboot folder
I'm running stock rom. My carrier is nTelos (CDMA).
I notice that your rom version and radio version are not the latest. You may have to ungrade those before you can get it to run.
Emmie0702 said:
Did didn't get past the Linux menu. It only ran for about 4 or 5 seconds then locked up. I had to soft reset to get my phone functioning again.
I did exactly what the instructions in the 1st post said to do.
Downloaded andboot file to \storage card\andboot
Downloaded androidinstall.zip & placed in the andboot file
Clicked haret.exe
Selected run while holding up the volume key
I read in the post that the below items were not necessary so I skipped them:then download vogueeclairnbh.zip
unzip vogueeclairnbh.zip to get VOUGIMGx480.NBH
copy VOUGIMGx480.NBH to your sdcard /andboot folder
I'm running stock rom. My carrier is nTelos (CDMA).
Click to expand...
Click to collapse
Stevevo said:
I notice that your rom version and radio version are not the latest. You may have to upgrade those before you can get it to run.
Click to expand...
Click to collapse
always good to have latest radio. i don't know if it will interfere with you booting linux, usually it creates problems with gps or data once you are in android. but who knows, anything is possible I suppose.
list the files that are in /sdcard/andboot/ emmie0702
I've always wanted to update me ROM but there is not a Server cab out there that will give me back my settings for nTelos. Its a small cell network therefore no one has bothered to create one (I really can't blame them). So I've never tried it out of fear of Bricking my phone. For some reason nTelos did not offer WiFi, GPS or MMS with this phone through their network (didn't know that until AFTER I bought it). They have it for other phones but not this one for some reason. That was a little annoying when I 1st got it but I've leaned to live without it. I love my phone even w/o those things. I get pics emailed to me & can email them to other's phone through their carrier address (eg [email protected]). WiFi would be nice but I never use GPS. As far as the Radio. I assume it sort of the same step. I pretty much have to install it & it will wipe out or "Hard Reset" my phone, right...causing me to losing all my network info?
Here are the files I have in the andboot folder:
androidinstall
default
haret
initrd
READE-BASEFILES
zImage
zImage-eclair
** I could not file the "eclair252_androidinstall.zip" file to download so I downloaded the androidinstall.zip under the "2010-01-05" folder from sourceforge.net/projects/androidhtc/files/. Could that be the problem or could it be a combination of my Radio/ROM & the androidinstall tar I downloaded?
Thanks for the help guys!
is it androidinstall.zip or androidinstall.tar?
tatnai said:
is it androidinstall.zip or androidinstall.tar?
Click to expand...
Click to collapse
File Name: androidinstall
File Type: WinRAR archive (.tar)
Emmie0702 said:
I've always wanted to update me ROM but there is not a Server cab out there that will give me back my settings for nTelos. Its a small cell network therefore no one has bothered to create one (I really can't blame them). So I've never tried it out of fear of Bricking my phone. For some reason nTelos did not offer WiFi, GPS or MMS with this phone through their network (didn't know that until AFTER I bought it). They have it for other phones but not this one for some reason. That was a little annoying when I 1st got it but I've leaned to live without it. I love my phone even w/o those things. I get pics emailed to me & can email them to other's phone through their carrier address (eg [email protected]). WiFi would be nice but I never use GPS. As far as the Radio. I assume it sort of the same step. I pretty much have to install it & it will wipe out or "Hard Reset" my phone, right...causing me to losing all my network info?
Here are the files I have in the andboot folder:
androidinstall
default
haret
initrd
READE-BASEFILES
zImage
zImage-eclair
** I could not file the "eclair252_androidinstall.zip" file to download so I downloaded the androidinstall.zip under the "2010-01-05" folder from sourceforge.net/projects/androidhtc/files/. Could that be the problem or could it be a combination of my Radio/ROM & the androidinstall tar I downloaded?
Thanks for the help guys!
Click to expand...
Click to collapse
you should be able to update your radio without touching your rom, there is a radio only version of 3.42.50, see the faqs noob guide to flashing, it is in there.
I am unsure what you downloaded; it looks like you have the right basefiles, but if you got androidinstall.zip from 2010-01-05 I don't think it will have anything compatible with the norootfs method, and is probably causing your problem.
delete androidinstall.tar, download this and drop the androidinstall.tar that is inside into your sdcard/andboot/ folder. then run haret and keep holding volume up until you see the install menu. then post back.
tatnai said:
you should be able to update your radio without touching your rom, there is a radio only version of 3.42.50, see the faqs noob guide to flashing, it is in there.
I am unsure what you downloaded; it looks like you have the right basefiles, but if you got androidinstall.zip from 2010-01-05 I don't think it will have anything compatible with the norootfs method, and is probably causing your problem.
delete androidinstall.tar, download this and drop the androidinstall.tar that is inside into your sdcard/andboot/ folder. then run haret and keep holding volume up until you see the install menu. then post back.
Click to expand...
Click to collapse
OK. Same thing...phone locks up at the same place. I downloaded the file you attached & downloaded the VOGUIMG.nbh file that was linked on PPCGeeks. I followed the instructions on PPCGeeks post "This is the vogue radio 3.42.50 designed for the vogue (this is not the titan port). I removed it directly from the bell rom and recomplied it as a radio only .nbh. This is a radio only rom designed to be flashed from bootloader from sd card and doesn't require a hard reset. Copy VOGUIMG.nbh to root of fat32 micro sd card 2gb or less and place phone in bootloader and it will run."
I still get the same outcome. Both your attachment & the VOGUIMG.nbh file are located \Storage Card\ on my phone. When the Radio instructions say its designed to be flashed from Bootloader what exactly does that mean? Do I need a program for that or is it suppose to start when I Run the default.txt after I select haret in the andboot folder?
the place you got the link to the radio only version also has instructions on how to flash your phone - see the before starting area. short: get into bootloader mode, then flash.
I still think there is something else that you are doing wrong, I just can't put my finger on it right now; i'm hoping others will be able to help.
tatnai said:
the place you got the link to the radio only version also has instructions on how to flash your phone - see the before starting area. short: get into bootloader mode, then flash.
I still think there is something else that you are doing wrong, I just can't put my finger on it right now; i'm hoping others will be able to help.
Click to expand...
Click to collapse
OK. I figured out how to get it in bootloader mode (power button + camera + soft reset). The Red/Blue/Green screen pops up & then a Grey screen that says "loading...". Its been "loading" for over 5 minutes now. What could be the problem?
Hey all, I'm currently in RA after flashing the recovery image , and I'm trying to install the FRESH rom on there but for some reason when I try to "Flash zip from sdcard" it's telling me "No zip files found." Why is that? I have the whole zip folder placed in the main SD card, so why is it telling me it's not found?
BOOGIE_BOTZ said:
Hey all, I'm currently in RA after flashing the recovery image , and I'm trying to install the FRESH rom on there but for some reason when I try to "Flash zip from sdcard" it's telling me "No zip files found." Why is that? I have the whole zip folder placed in the main SD card, so why is it telling me it's not found?
Click to expand...
Click to collapse
I responded to you on http://GeekFor.Me, but the reason is because RA looks in the root of sdcard, the zips can't be inside of any folders.
So does that mean I have to take out all the individual files and place them directly into the root of the sdcard? Because I just basically copied the download folder and dropped it into the root. Thanks for the reply
BOOGIE_BOTZ said:
So does that mean I have to take out all the individual files and place them directly into the root of the sdcard? Because I just basically copied the download folder and dropped it into the root. Thanks for the reply
Click to expand...
Click to collapse
You need to leave the files in a .zip, but yea that zip needs to be on the root of the sdcard.
The only file you need to install the rom is fresh-cdma-hero-20d.zip (for fresh rom 2.0d). Any other zips are just addons or tweaks or whatever they may be.
flipzmode said:
You need to leave the files in a .zip, but yea that zip needs to be on the root of the sdcard.
The only file you need to install the rom is fresh-cdma-hero-20d.zip (for fresh rom 2.0d). Any other zips are just addons or tweaks or whatever they may be.
Click to expand...
Click to collapse
Hmm, I'm on a Mac and maybe it's me but the link I download from gives me an actual folder rather than a zip. And when I rename the folder to a zip, it gives an error. Is there a mirror link to download an actual zip folder?
Boogie when you download it dont opening after it finishes downloading .. just use the finder to navigate to where its at and then copy that to your sd .. when you open it on a mac it will automatically create the extracted folder .. hope this helps ...
Sounds like your using Safari to download it. To make this easier in the future go to Safari > Preferences > General and make sure that "Open safe files after downloading" is NOT check-marked.
Safari is unpacking the zip file for you. The file you want is in your trash bin, drag it to the root of your SD card and that's it..
Ok I'm gonna give it another go. Since I made it all the way through to the RA stage, there's no reason I shouldn't be able to flash the rom is there?
Thanks for all the help everyone I finally got it to flash the FRESH rom, but once I rebooted it, it's still in the "HTC" branded screen. Is it loading? It's not going anywhere but this screen, although I know it's doing something because the animation shine is moving.
BOOGIE_BOTZ said:
Thanks for all the help everyone I finally got it to flash the FRESH rom, but once I rebooted it, it's still in the "HTC" branded screen. Is it loading? It's not going anywhere but this screen, although I know it's doing something because the animation shine is moving.
Click to expand...
Click to collapse
After flashing a new ROM, it can take up to 10 minutes or so to load.
Nice Everything is all good! Now my last question is how do I get the removed apps from the ROM back onto here? I actually prefer to have some of those programs back onto the phone.
BOOGIE_BOTZ said:
Nice Everything is all good! Now my last question is how do I get the removed apps from the ROM back onto here? I actually prefer to have some of those programs back onto the phone.
Click to expand...
Click to collapse
There is a link in the release notes to download all the removed apk's from Fresh Rom. You will then need to use adb push to push them back to /system/app. Search for how to setup adb on a mac as I honestly don't know.
I get this error:
http://imgur.com/lpaNW.png
I've tried setting my phone to r/w and r/o over and over again in Root Explorer, but no luck. I have no idea what to do. I could format, but I'm not sure if that would work and I would really like to keep all my files.
Which rom is running? Which o/s on the computer? Which storage on the phone?
There was trouble with SD card in the Vibrant ASOP ish JK2 1.1 thread Vibrant Thread search
cappysw10 said:
Which rom is running? Which o/s on the computer? Which storage on the phone?
There was trouble with SD card in the Vibrant ASOP ish JK2 1.1 thread Vibrant Thread search
Click to expand...
Click to collapse
Darkyy's 5.2 captivate ROM on Windows 7. Not sure what you mean by which storage, but every file is affected. I've been searching for a while with no results :-/
I need to upgrade badly. I'm having problems with getting calls now, too. Some files can be copied onto my computer fine, but many of them give me "Error 0x80070057: The parameter is incorrect."
http://www.multiupload.com/DQESXQN78U
that's my zip package. it has
odin 1 click stock
Clockwork Mod Update Zip
xcals kernel
the new modem jl3
and nexus s live wallpaper.
zippox180 said:
i decided to make a zip that includes the odin 1 click to stock, a cwm update zip that can be put on the sd card and installed by booting into recovery and selecting reinstall packages, the jl3 modem, xcals 2.2.1 kernel and the nexus s live wallpaper which can be installed by placing the LiveWallpaper.apk into system/app.
This is not one big whole flashable zip. it is a zip that includes what seems like the most common items i could think of in one folder so you dont have to search. i hope this is helpful for some.
Odin 1 click-open the odin file first, then put your phone in download mode and start the one click
CWM update.zip-copy to internal sd card, 3 button combo into recovery,reinstall packages(might take a few times)
jl3 modem- flash with CWM, boot cwm recovery, select install zip from sd card,choose zip and select the jl3update
xcals 2.2.1 kernel- flash with CWM, boot cwm recovery, select install zip from sd card,choose zip and select the kernel zip
LiveWallpaper Nexus s- move copy livewallpaper.apk to internal sd and move to system/app via root explorer or something of that sort
Again hope this helps somebody
Click to expand...
Click to collapse
this will get you back to stock and you can then copy the cwm update zip. and install the rom of your choice although i would stay away from the one that gave you problems.
zippox180 said:
http://www.multiupload.com/DQESXQN78U
that's my zip package. it has
odin 1 click stock
Clockwork Mod Update Zip
xcals kernel
the new modem jl3
and nexus s live wallpaper.
this will get you back to stock and you can then copy the cwm update zip. and install the rom of your choice although i would stay away from the one that gave you problems.
Click to expand...
Click to collapse
Awesome, thanks! I'll start getting my phone fixed when I get home from work. I don't think there's anything else I can do to get my files copied over, but I can probably just back them up on my phone somehow.
im trying to flash paragon rc5. i follow the instructions, but when i go to choose sd card... and click on paragon.zip as file to use in clockwordmod recovery manager, it loads okay, then says replacing recovery manager and reboots. what did i do wrong?
To flash rom you should boot into recovery, select ingersoll zip from sd, choose zip, select parogon, confirm, done
Well when i do, it acts like its going to install, but then says "replacing recovery manager with clockwork..." then exits and reboots into the normal recovery screen.
Each time i get into recovery it is the normal one. I have to go to reinstall packages to get to the clockworkmod one. Something tells me thats not right.
Could this have happened because i installed rom manager and it didnt say i needed it?
Sounds like you are flashing an update.zip to get clock work recovery. i think you need to confirm you downloaded the correct file
What happened was i installed rom manager, got recovery manager through it, then downloaded paragon and its update.zip file. So am i basically flashing the recovery manager right now?
Sounds like it, are you on stock?
Paragon rom zip should be like 170mb in size
Rooted, but otherwise stock. Have already wiped all my data on it in preparation.
What im trying to do is this- have update.zip and paragon.zip in main internal sd folder. Go into recovery---reinstall---then it loads clockwork, then go to from sd---choose--- and if i pick paragon.zip it still does it.
let me clarify this, basically you do not need rom manager here.
1. download the update.zip and put it in your sdcard root folder;
2. download the rom file (170mb one) and put it in your sdcard; not necessary to be the root folder;
3. suppose you are on the stock rom; shut down your phone and use key combo to get into recovery mode;
4. apply the changes (i remember it is the second option), you may need to do it twice. you should now be in the cwm;
5. use the menu in the cwm to browse and install the rom file
6. reboot your phone. done.
Boot phone up normally. Delete paragon file you have. Redownload. Like I said the file should be like 170mb.
Update.zip goes in the root folder? Where is that? I couldnt find it anywhere....
The file is about 170mb. I know thats correct, im thinking since i had already installed cwm i moght have screwed up.
when you select reinstall packages you should go into green recovery/clockwork recovery.
If that works boot phone, open rom manager, select install rom from sd, select paragon
check the attached file.
Thats the update.zip i have. Now where do i put the damn thing?
Your internal sd card. Dl to phone, go to my files app, open dl folder find file select copy, click paste. Should now be where you need it
mm01 said:
Thats the update.zip i have. Now where do i put the damn thing?
Click to expand...
Click to collapse
copy to your sdcard root directory.
mm01 said:
Thats the update.zip i have. Now where do i put the damn thing?
Click to expand...
Click to collapse
/sdcard
10char
wonner said:
/sdcard
10char
Click to expand...
Click to collapse
ok, ok, i will let you guys help him ... lol
I feel.....stupid. Like, asking if a mac gets bluescreens stupid. I renamed the files on my pc alot, and upon closer inspection, discovered... *Ahem* xp had decided to rename the cwm fole the same as the rom file (yeah, lets go with that...). So i was flashing cwm.
Im going to let my battery charge and then try it. Will post results tomorrow morning. Thanks for all the help guys!
mengbo said:
ok, ok, i will let you guys help him ... lol
Click to expand...
Click to collapse
Sorry, I didn't mean to step on your toes. We all posted at the same time.
Got it all up and running. Works infinitely many times better than it did stock. Got a gps lock in about 5 seconds. Im loving this phone again.
Hey there =)
I'm a proud owner of a Optimus 2x. I've rooted my phone and flashed the "stock rom" ( From this topic) and downloaded 2 Custom ROMs ( Thisone and another one from a dutch forum).
However, when I go to CWM and do a Backup and complete wipe, when I wan't to flash the rom (as said how to do it in the topics) I get things like this:
"Finding udate package. . .
Opening update package. . .
E:Can't open /sdcard/update.zip (bad)
Toggle signature verification: on/off
Toggle script asserts: on/off
I tried all possible options.
When I got the signature verification ON, then CWM says the signature is not verified
I worked with both V10A and V10B, both don’t work
What do I do wrong?
Killastyle said:
Hey there =)
I'm a proud owner of a Optimus 2x. I've rooted my phone and flashed the "stock rom" ( From this topic) and downloaded 2 Custom ROMs ( Thisone and another one from a dutch forum).
However, when I go to CWM and do a Backup and complete wipe, when I wan't to flash the rom (as said how to do it in the topics) I get things like this:
"Finding udate package. . .
Opening update package. . .
E:Can't open /sdcard/update.zip (bad)
Toggle signature verification: on/off
Toggle script asserts: on/off
I tried all possible options.
When I got the signature verification ON, then CWM says the signature is not verified
I worked with both V10A and V10B, both don’t work
What do I do wrong?
Click to expand...
Click to collapse
Try to select zip file from SD Card. If you have renamed the ROM to update.zip this should work fine, if that's the case the update.zip is corrupted.
I’ve already tried that to, doesn’t work. I suppose that a ‘’physical’’ MicroSD means one you can touch, so a real one (I got one and placed the ROMs on the MicroSD). I also tried making the .zip files a ‘’Read Only’’. I just keep getting the same screen that it doesn’t work.
And is there also a difference between a NANDROID backup and the backup I do in CWM?
Killastyle said:
I’ve already tried that to, doesn’t work. I suppose that a ‘’physical’’ MicroSD means one you can touch, so a real one (I got one and placed the ROMs on the MicroSD). I also tried making the .zip files a ‘’Read Only’’. I just keep getting the same screen that it doesn’t work.
And is there also a difference between a NANDROID backup and the backup I do in CWM?
Click to expand...
Click to collapse
Yes, you need a physical SD card. See if it gets mounted in CWM. Nandroid backup is the backup you do from the backup/restore menu in CWM.
If you keep getting the same screen you have not selected the zip file that contains the ROM. Your CWM is looking for update.zip that should reside on the root of your physical SD card. If you select choose zip you can navigate to the rom zip file you downloaded.
How can I check if it gets mounted in CWM? I can find the update.zip (I renamed the zip file myself to update.zip) When I check in Astro I go to "sdcard/_ExternalSD" and there is on the root of the external SD the update.zip package..
However, I've done a backup back to the standard rom and now I see the LGE-Version is back to LGP990-V10a. Here are all my specs:
Basebandversion: 1035.21_20110223
Kernel: 2.6.32.9
Buildnumber: FRG83G
LGE: LGP990-V10a .
Can you maybe explain to me step by step how I can do a custom rom again? I think I have to start from scratch again?
Killastyle said:
How can I check if it gets mounted in CWM? I can find the update.zip (I renamed the zip file myself to update.zip) When I check in Astro I go to "sdcard/_ExternalSD" and there is on the root of the external SD the update.zip package..
However, I've done a backup back to the standard rom and now I see the LGE-Version is back to LGP990-V10a. Here are all my specs:
Basebandversion: 1035.21_20110223
Kernel: 2.6.32.9
Buildnumber: FRG83G
LGE: LGP990-V10a .
Can you maybe explain to me step by step how I can do a custom rom again? I think I have to start from scratch again?
Click to expand...
Click to collapse
First off, if you install MCR Fr12 then go and update your baseband to the newest one. Follow these instructions: http://forum.xda-developers.com/showthread.php?t=1008070
Download the MCR Fr12 again to ensure that it's not corrupted, check the MD5 of the zipfile and compare it with the one stated in the first post.
Put the zipfile on the external SD card, no need to rename it.
Reboot into CWM, and (not having my phone here, so maybe I don't remember the exact phrases) advanced menu/toggle signature check off and wipe all data (cache/user/dalvik)
install zip from SD card (not apply update.zip) and navigate to the downloaded rom and press power to select it. This should install MCR Fr12 without problems.
Hope it helps.
Edit: Are you able to browse the SD from CWM ? If not try formatting the SD card in your PC as FAT(32).
I haven't done it this way before, so I'm gonna check it out
And I think I'm able to browse the SD from CWM, because when I do ''Install zip from SD card" i can navigate trough the maps I created and the update file is on the root. I will try this asap ! I hope this works thx
edit: How can I check the MD5 of the zipfile?
The: E:Can't open /sdcard/update.zip (bad)
can refer to a corrupted update.zip so try and download it again
Tayutama said:
The: E:Can't open /sdcard/update.zip (bad)
can refer to a corrupted update.zip so try and download it again
Click to expand...
Click to collapse
+1
Had this error many times on my old Hero
Tayutama said:
The: E:Can't open /sdcard/update.zip (bad)
can refer to a corrupted update.zip so try and download it again
Click to expand...
Click to collapse
So that means that all the 4 different times I downloaded the file it has gone corrupted?
Killastyle said:
So that means that all the 4 different times I downloaded the file it has gone corropted?
How can I check the MD5 files?
Click to expand...
Click to collapse
Maybe
Try searching for winMd5SumPortable, nice tool to check MD5 sums.
Killastyle said:
So that means that all the 4 different times I downloaded the file it has gone corropted?
How can I check the MD5 files?
Click to expand...
Click to collapse
Well it might refer to a corrupted download
What is the size of the file after you downloaded it?
Also regarding checking MD5 i use a program called HashTab.
It's a a small program that adds a tab when you check a files properties.
EDIT: also that error can also just be it looks for a file called update.zip but can't find it.
In windows you might see the file as update.zip but in reality it's called update.zip.zip and that also courses that error.
If you haven't renamed it, then choose install zip from SD card instead of install update.zip in CWM and then select the file
And still it doesn't work. I've checked the MDA on the file where I downloaded it to, then it's correct. However, as soon as I copy/paste or cut/paste the file to my MicroSD root, the MDA doesn't match anymore. Can that be the reason?
I might have the solution. When I do a full wipe via CWM, the base version goes back to V10a, maybe that is the solution. I will download the file directly to the MicroSD right now. I let you guys know if its working
Edit: omfg, I found out, I think it's working right now. I formatted and mounted the MicroSD via CWM, copied the file to the MicroSD and the MD5 was now still the same. Right at this moment my phone is writing it to the system. So it was probably the MicroSD not correctly formatted or such... Thx for all the help guys
Killastyle said:
I might have the solution. When I do a full wipe via CWM, the base version goes back to V10a, maybe that is the solution. I will download the file directly to the MicroSD right now. I let you guys know if its working
Edit: omfg, I found out, I think it's working right now. I formatted and mounted the MicroSD via CWM, copied the file to the MicroSD and the MD5 was now still the same. Right at this moment my phone is writing it to the system. So it was probably the MicroSD not correctly formatted or such... Thx for all the help guys
Click to expand...
Click to collapse
is there any update to this i also get this kind of error/