Database Develop

Gear Live and burn-in

Since Android Wear has the screen on all the time, and the Gear Live is AMOLED wouldn't burn in be an issue? the galaxy gears on display at retail stores have a bit of a burn in problem.

nolandynamite said:
Since Android Wear has the screen on all the time, and the Gear Live is AMOLED wouldn't burn in be an issue? the galaxy gears on display at retail stores have a bit of a burn in problem.
Click to expand...
Click to collapse
From what I've read, the watches are "always on" in the sense at the screen stays on, but the lighting is turned off. So instead of having to refresh the UI every time the watch is seen, it just turns the light on. Similar to a backlight for a laptop. Display models are usually always lit so they burn in due to the display being lit 24/7.

mitch27 said:
From what I've read, the watches are "always on" in the sense at the screen stays on, but the lighting is turned off. So instead of having to refresh the UI every time the watch is seen, it just turns the light on. Similar to a backlight for a laptop. Display models are usually always lit so they burn in due to the display being lit 24/7.
Click to expand...
Click to collapse
As far as I am aware, AMOLED has no backlight...that's sort of the point...every pixel "burns" individually.

CommanderROR said:
As far as I am aware, AMOLED has no backlight...that's sort of the point...every pixel "burns" individually.
Click to expand...
Click to collapse
I said similar because not everyone is familiar with the way AMOLED's work. But the same thing occurred at his Best Buy as would any modern portable display, device is constantly lit, and resulted in burn in.

I'm sure the user has an option to turn off the display if they choose to.
Sent from my SM-N900T using XDA Premium 4 mobile app

they also have dark mode and dim (holding palm over the screen) don't they?
hopefully there'll be something within all this to prevent issues.

Only LG G Watch has "Always-on" display, Gear Live and Moto 360 have a button to turn it on and yes in the Setting you have an option to adjust the brightness.

Hreidmar said:
Only LG G Watch has "Always-on" display, Gear Live and Moto 360 have a button to turn it on and yes in the Setting you have an option to adjust the brightness.
Click to expand...
Click to collapse
After watching like, 40 videos, I'm pretty sure that they all have always on. The button on the Gear Live and the 360 are to act as a physical way of turning off the display entirely as LG allows by covering it with your palm. But yeah, from what I've seen, the Gear Live goes into the same low power greyscale mode that the G Watch goes into, and both support wrist flicking to activate the display.

DrawnToLife said:
After watching like, 40 videos, I'm pretty sure that they all have always on. The button on the Gear Live and the 360 are to act as a physical way of turning off the display entirely as LG allows by covering it with your palm. But yeah, from what I've seen, the Gear Live goes into the same low power greyscale mode that the G Watch goes into, and both support wrist flicking to activate the display.
Click to expand...
Click to collapse
I did watch about 40 videos too lol and LG G Watch was the only advertised as "screen always on" as Gear Live has Super AMOLED display and even greater resolution than LG G Watch so the Gear Live would burn out in matter of hours.
LG G has 400 Mah battery, IPS display and lower resolution so it can withstand being "always-on" for at least 36 hours as advertised.

Hreidmar said:
I did watch about 40 videos too lol and LG G Watch was the only advertised as "screen always on" as Gear Live has Super AMOLED display and even greater resolution than LG G Watch so the Gear Live would burn out in matter of hours.
LG G has 400 Mah battery, IPS display and lower resolution so it can withstand being "always-on" for at least 36 hours as advertised.
Click to expand...
Click to collapse
Except, you know, on the official Google page, and in the videos that I've seen, the screen also just times out to a low power, black and white screen (referring to the Gear Live). Super AMOLED is more power efficient in idle / dark screens due to the nature of individual pixel lightning, so I don't really understand what you mean by the Gear Live would burn out in a matter of hours (they should be relatively the same from what I can tell).
Always on = standby (i.e low brightness, dark screen). It does not mean full brightness, always coloured watch face. No way in hell. If that was the case, why would the displays time out in what appears to be 5-10 seconds?
Yeah.. I'm going to wait on conclusive battery testing before making my purchase. I've got like a week anyways, might as well.
Also, I'm legitimately concerned about screen burn in now, given the nature of AMOLED.

DrawnToLife said:
Except, you know, on the official Google page, and in the videos that I've seen, the screen also just times out to a low power, black and white screen (referring to the Gear Live). Super AMOLED is more power efficient in idle / dark screens due to the nature of individual pixel lightning, so I don't really understand what you mean by the Gear Live would burn out in a matter of hours (they should be relatively the same from what I can tell).
Always on = standby (i.e low brightness, dark screen). It does not mean full brightness, always coloured watch face. No way in hell. If that was the case, why would the displays time out in what appears to be 5-10 seconds?
Yeah.. I'm going to wait on conclusive battery testing before making my purchase. I've got like a week anyways, might as well.
Also, I'm legitimately concerned about screen burn in now, given the nature of AMOLED.
Click to expand...
Click to collapse
i've been concerned about screen burn in from time to time as well (most recently with the gnex). but then i realized it is highly unlikely i'll have the device for long enough to achieve burn in and/or notice

I've been playing with my Gear Live for a couple of days, so here's what I can tell :
- The screen is "Always On" by default, which means it will get dimmer and switch to a black background on most watch faces (and for AMOLED, black means "off").
- You can set it to turn off completely.
- In order to dim it (or turn it off depending on the settings) you can either wait, cover the screen with your hand, or use the physical button... The button is not really practical and seems to serve absolutely no purpose since you can use the screen.
- I haven't noticed any burn-in at all yet
- I think I noticed that from time to time the facewatch (I'm using the one with the digital hour in the center and analog minutes, I think it's called "digitalog" ) switches a few pixels to the right or to the left. My guess is it is to prevent burn in, I know most plasma TVs do that too.
- I had a Galaxy S2 for several years before switching to a Nexus 5, and yes, the toip of the screen where the notification bar usually is was burnt-in (or rather I think the whole screen was burnt except for this black bar). It was noticeable on full screen apps but never bothered me. Even if it happens on the Gear Live I can't see it bothering me... It's not like I'll be watching movies on it...
So my guess is you should be fine... But if you're really worried you can always disable "Always On".

BlueScreenJunky said:
I've been playing with my Gear Live for a couple of days, so here's what I can tell :
- The screen is "Always On" by default, which means it will get dimmer and switch to a black background on most watch faces (and for AMOLED, black means "off").
- You can set it to turn off completely.
- In order to dim it (or turn it off depending on the settings) you can either wait, cover the screen with your hand, or use the physical button... The button is not really practical and seems to serve absolutely no purpose since you can use the screen.
- I haven't noticed any burn-in at all yet
- I think I noticed that from time to time the facewatch (I'm using the one with the digital hour in the center and analog minutes, I think it's called "digitalog" ) switches a few pixels to the right or to the left. My guess is it is to prevent burn in, I know most plasma TVs do that too.
- I had a Galaxy S2 for several years before switching to a Nexus 5, and yes, the toip of the screen where the notification bar usually is was burnt-in (or rather I think the whole screen was burnt except for this black bar). It was noticeable on full screen apps but never bothered me. Even if it happens on the Gear Live I can't see it bothering me... It's not like I'll be watching movies on it...
So my guess is you should be fine... But if you're really worried you can always disable "Always On".
Click to expand...
Click to collapse
How is the battery though? Think you can get through a solid day with heavy notification flow? That's all I really care about.

BlueScreenJunky said:
- I think I noticed that from time to time the facewatch (I'm using the one with the digital hour in the center and analog minutes, I think it's called "digitalog" ) switches a few pixels to the right or to the left. My guess is it is to prevent burn in, I know most plasma TVs do that too.
Click to expand...
Click to collapse
I have a Gear Live, and can confirm this is true. I've seen it on multiple watch faces.

DrawnToLife said:
Except, you know, on the official Google page, and in the videos that I've seen, the screen also just times out to a low power, black and white screen (referring to the Gear Live). Super AMOLED is more power efficient in idle / dark screens due to the nature of individual pixel lightning, so I don't really understand what you mean by the Gear Live would burn out in a matter of hours (they should be relatively the same from what I can tell).
Always on = standby (i.e low brightness, dark screen). It does not mean full brightness, always coloured watch face. No way in hell. If that was the case, why would the displays time out in what appears to be 5-10 seconds?
Yeah.. I'm going to wait on conclusive battery testing before making my purchase. I've got like a week anyways, might as well.
Also, I'm legitimately concerned about screen burn in now, given the nature of AMOLED.
Click to expand...
Click to collapse
I own a Gear Live and can confirm that it does indeed have an always on display (which can be toggled from settings) that dims to gray scale when not in use just like the G Watch.
At the same time I can also confirm that having my watch now just around 3 weeks has already showed some very minor signs of burn-in. Typically when in apps or settings. As I said though its very minor and not really noticeable unless you're looking for it. That said though it is there.
Also to clear up battery life the Gear Live can withstand 36hours of always on screen. While I typically charge my watch each night I have tested it and can get it to run from one morning through to the following night before the battery reaches 5%. This is with the Always-on display option enabled.

Are you guys leaving the screen on all night when you're sleeping? I know its not lit up all the way but like the dimmed version of the screen. Like I'm using the simple clock. You think its okay to leave that on all night? I'm thinking it'll be okay cause it'll gradually change over night so it's not technically sitting on one time for 7 hours.
Sent from my XT1060 using XDA Free mobile app

tu3218 said:
Are you guys leaving the screen on all night when you're sleeping? I know its not lit up all the way but like the dimmed version of the screen. Like I'm using the simple clock. You think its okay to leave that on all night? I'm thinking it'll be okay cause it'll gradually change over night so it's not technically sitting on one time for 7 hours.
Sent from my XT1060 using XDA Free mobile app
Click to expand...
Click to collapse
I am a little worried about burn in myself so I turn the device off at night when I charge it. Even though the pixels should shift with the default watch faces I just think it's a safer bet to power it off.

[Q] Screen flicker

When I put my nexus to charge, screen flickers like it needs more power. But when I increase the brightness it goes away or I can't see it. Tried a different power outlet as well. And I'm using the turbo charger.
Anyone experiencing this?

I just received my Nexus 6 and I notice a lot of screen flickering if I have the brightness set to low or up to 25% ...I see more flickering when I have the ambient lighting option enabled in settings. If I put the brightness to 50% or more it kind of eliminated the flickering...I am worried because I'm starting to question if this might be considered a defective display. Thanks

Yep, I got mine on launch day with T-Mobile. The screen flickers at lower brightness levels, at first I thought it was my eyes or I was just going crazy.
But it definitely is flickering, kinda similar to filming a fat old CRT TV with your video camera for your Halo 2 Super Bounce Montages (too a much lesser extent).
I'm a bit worried that it might burn out one day...
Also, my display is uneven.
I haven't looked into it yet, but maybe someone here could tell me -- should I contact Motorola or T-Mobile for a replacement? I have a feeling T-Mobile will charge me for it.

I get this too. Is it something we just have to live with?

Image retention or burn in?

Hey all,
A few days ago, I bought a secondhand nexus 6. I've noticed some burn in (navbar) and I tried this app: https://play.google.com/store/apps/details?id=com.tinyroar.amoledburninfix. The last 2 days I've let it run around 2 hours in total. It looks like it does help wear the pixels evenly. But I've also noticed, this evening, that if I do the test mode (gray screen) right after the "fix mode", the navbar ghost is almost gone. But if I run the test mode after normal usage (so when I don't use the "fix mode" for a while" I see more navbar ghosting. So what can explain the difference? Is the navbar ghosting that I see on a grey background image retention? Does it mean that the screen isn't that much affected with burn in because I don't see the navbar after using the "fix mode" (invert colors)?
Also, when I use the grey screen mode, it looks like I see the "ghost" of the clock in the right upper corner. The thing is, I can see the hour and minutes that where shown on the screen last minutes before testing with the grey screen. Does that confirm that this is image retention?
I'd like to hear your thoughts
Greets,
Swa100

I don't quite understand this issue as well. I bought my Nexus 6 brand new. I have not had it for quite a full month yet. I am already seeing "burn in" / "image retention" / "ghosting" from the Nav bar mainly but the status bar as well. I can only notice it in the "Amoled Burn-in Fixer" app when on the test burn in grey screen. I can not notice it anywhere else. Every once in a while I will turn off adaptive brightness, max out brightness, and run the "fix" for about 15 minutes. It literally disappears / fixes it. However, a few days later, it comes back. This is why I just run it once a week or so. I feel it will help even pixel wear, and it appears to be working overall.
This seems to be a VERY common problem on the Nexus 6. Remember, Samsung is the only manufacturer of AMOLED displays. I am assuming that their quality control department has different grading for their panels. Highest they keep for themselves, second they sell, third they throw out? Also, I have heard that burn in is much less common on the Samsung S series and Notes which also feature AMOLED displays. This is due to Samsung featuring a home button and capacitive buttons on each side of the home button. (no nav bar) Also their status bar is usually transparent. It seems to me that Samsung is well aware that AMOLED panels are subject to burn in / image retention and they kind of stay a step ahead of it by having buttons rather than a nav bar and the transparent status bar. Also if I remember right, their status bar symbols and numbers are a light blue rather than white, which is the color that is the hardest on AMOLED displays.

Rektifying said:
I don't quite understand this issue as well. I bought my Nexus 6 brand new. I have not had it for quite a full month yet. I am already seeing "burn in" / "image retention" / "ghosting" from the Nav bar mainly but the status bar as well. I can only notice it in the "Amoled Burn-in Fixer" app when on the test burn in grey screen. I can not notice it anywhere else. Every once in a while I will turn off adaptive brightness, max out brightness, and run the "fix" for about 15 minutes. It literally disappears / fixes it. However, a few days later, it comes back. This is why I just run it once a week or so. I feel it will help even pixel wear, and it appears to be working overall.
This seems to be a VERY common problem on the Nexus 6. Remember, Samsung is the only manufacturer of AMOLED displays. I am assuming that their quality control department has different grading for their panels. Highest they keep for themselves, second they sell, third they throw out? Also, I have heard that burn in is much less common on the Samsung S series and Notes which also feature AMOLED displays. This is due to Samsung featuring a home button and capacitive buttons on each side of the home button. (no nav bar) Also their status bar is usually transparent. It seems to me that Samsung is well aware that AMOLED panels are subject to burn in / image retention and they kind of stay a step ahead of it by having buttons rather than a nav bar and the transparent status bar. Also if I remember right, their status bar symbols and numbers are a light blue rather than white, which is the color that is the hardest on AMOLED displays.
Click to expand...
Click to collapse
Try using the app to "fix" the burn in and check it directly after in the test mode. Then just use your phone for a few min and test it again. Do you also see the difference after a few minutes already? This must be image retention, right? So does that mean that the screen it's "normal state" is right after the "fix mode"? And the ghosting you see after a few minutes is just image retention?

How to avoid the AMOLED flickering?

I've recently bought the 9.7" version of the Tab S2. I was aware of how unrealistic and oversaturated the AMOLED display is on default setting, but luckily this can be turned off, so it was the very first thing i did (though now the white balance is off, but at least it is not oversaturated).
Unfortunately i wasn't aware the fact that the display at below ~75% brigthtness flickers. The lower the brightness the more disturbing it is. And it drives me crazy. I hate the flickering cheap cr*p LED light bulbs, i hate that most notebook screens with LED backlight are non PWM free, and are flickering And after having this tablet for three days, i am hating it too. I frankly believe these products should be banned, because it hurts your eye, and your brain. I thought when we said good bye to CRT monitors, flickering screens will never be an issue again. Unfortunately they are :/
After googling the internet i found this article gs5.wonderhowto.com/how-to/eliminate-screen-flicker-lower-minimum-brightness-android-0157760 but the solution unfortunately requires a rooted device, wich would trip the knox and void the warranty, so it's a no no for me. Then I found several other apps on the play store which are doing the same without requiring root access: drawing a black overlay over the screen and you can set the transparency of it, so you can get a lower brightness without the flickering, because your screen brightness is around maximum, the lowered transparcy of the black overlay makes it less bright. Unfortunately none of these apps work like the one for the rooted devices, wich has a second slider at status bar, so instead of the brightness you can change the transparency at the notification screen. The non rooted apps i found do not work this way, they don't have the extra slider, you need to tap them, so you can get to where you can change the trasnparency and that's very uncomfortable. I tried so far Darker and three other Screen Filter apps, but none of them works with a second slider :/ Also using the Screen Filter apps when there is a smooth color transition on the dipslay (default background picture for example) gives ugly end result. Using a Screen filter app might reduce battery life so i might need to charge it more often (i don't care), but since the display is not flickering, it is always on, it might will burn in faster (i do care, i intend to use this tablet for 3+ years) So i am currently in debate wether i should return this product and get my money back or not. It is a really great device, but this terrible flickering of the AMOLED screen makes me super unhappy, wish it had an IPS display :/
If this is an issue for you too, and you found a Screen Filter app with a second slider at the notification area (without requiring root permissions) please let me know.

Is this just an s2 thing, nothing of the sort on my tab s?
Sent from my SM-T280 using XDA-Developers mobile app

It's not an S2 issue, I've seen several other phones and tablets in low light conditions set to a low brightness flickering like mine.. But you can test it, set a low brightness and start waving your finger in front of the screen like crazy. If you see ~10 seperate fingers -like in the picture attached- instead of one blurry (what you should see if there was a constant backlight), than yours is flickering too.

asdfh said:
It's not an S2 issue, I've seen several other phones and tablets in low light conditions set to a low brightness flickering like mine.. But you can test it, set a low brightness and start waving your finger in front of the screen like crazy. If you see ~10 seperate fingers -like in the picture attached- instead of one blurry (what you should see if there was a constant backlight), than yours is flickering too.
Click to expand...
Click to collapse
I see what you mean, but it doesn't bother me as there is no perceivable flickering at all and it only happens when the brightness is below a certain level.

If that certain level would be around 20% brightness i wouldn't care. I haven't tested out yet, but that certain level is somewhere below 70% So -for me- it would flicker all the time.

Eh, there is no screen flickering but your finger is flickering over a light source aka *screen*. It's an optical illusion you are referring to.

I am also very sensitive to pwm on displays, it takes me less than a minute to feel sick from the display having pwm.
Any further solutions to this? Thank you.

I'm using the the app 'Night Screen' it does the job on Android 7.0 on my LG G6 which uses pwm under 35% of brightness even though this is an ips screen. Hope it helps.

asdfh said:
I've recently bought the 9.7" version of the Tab S2. I was aware of how unrealistic and oversaturated the AMOLED display is on default setting, but luckily this can be turned off, so it was the very first thing i did (though now the white balance is off, but at least it is not oversaturated).
Unfortunately i wasn't aware the fact that the display at below ~75% brigthtness flickers. The lower the brightness the more disturbing it is. And it drives me crazy. I hate the flickering cheap cr*p LED light bulbs, i hate that most notebook screens with LED backlight are non PWM free, and are flickering And after having this tablet for three days, i am hating it too. I frankly believe these products should be banned, because it hurts your eye, and your brain. I thought when we said good bye to CRT monitors, flickering screens will never be an issue again. Unfortunately they are :/
After googling the internet i found this article gs5.****************/how-to/eliminate-screen-flicker-lower-minimum-brightness-android-0157760 but the solution unfortunately requires a rooted device, wich would trip the knox and void the warranty, so it's a no no for me. Then I found several other apps on the play store which are doing the same without requiring root access: drawing a black overlay over the screen and you can set the transparency of it, so you can get a lower brightness without the flickering, because your screen brightness is around maximum, the lowered transparcy of the black overlay makes it less bright. Unfortunately none of these apps work like the one for the rooted devices, wich has a second slider at status bar, so instead of the brightness you can change the transparency at the notification screen. The non rooted apps i found do not work this way, they don't have the extra slider, you need to tap them, so you can get to where you can change the trasnparency and that's very uncomfortable. I tried so far Darker and three other Screen Filter apps, but none of them works with a second slider :/ Also using the Screen Filter apps when there is a smooth color transition on the dipslay (default background picture for example) gives ugly end result. Using a Screen filter app might reduce battery life so i might need to charge it more often (i don't care), but since the display is not flickering, it is always on, it might will burn in faster (i do care, i intend to use this tablet for 3+ years) So i am currently in debate wether i should return this product and get my money back or not. It is a really great device, but this terrible flickering of the AMOLED screen makes me super unhappy, wish it had an IPS display :/
If this is an issue for you too, and you found a Screen Filter app with a second slider at the notification area (without requiring root permissions) please let me know.
Click to expand...
Click to collapse
So here is the app( https://play.google.com/store/apps/details?id=org.js.oledsaver ) to avoid pwm & use the phone with low brightness.
App name is OLED SAVER
It's simple. You install it & follow the instructions & use it. Enjoy! ?
---------- Post added at 07:04 PM ---------- Previous post was at 06:58 PM ----------
Babakkardan said:
I am also very sensitive to pwm on displays, it takes me less than a minute to feel sick from the display having pwm.
Any further solutions to this? Thank you.
Click to expand...
Click to collapse
https://play.google.com/store/apps/details?id=org.js.oledsaver

harigavara said:
So here is the app( https://play.google.com/store/apps/details?id=org.js.oledsaver ) to avoid pwm & use the phone with low brightness.
App name is OLED SAVER
It's simple. You install it & follow the instructions & use it. Enjoy!
---------- Post added at 07:04 PM ---------- Previous post was at 06:58 PM ----------
https://play.google.com/store/apps/details?id=org.js.oledsaver
Click to expand...
Click to collapse
Thanks for answering this 3 years old post I used Darker in the last three years to eliminate the flckering and was happy with it. I checked OLED Saver now, but it's permissions says to me it's a big no no.
Unfortunately, since Android 8 apps cannot draw a an overlay over system areas (notification bar etc., thanks google! ), so i guess i'll never have an OLED screen phone/tablet again.

Question Avoid keyboard burn-in

Hello all, my past 3 AMOLED phones have been facing burn-in where the keyboard is displayed as I tend to chat a lot! Can anyone give me an option to avoid it? Please don't troll and say use less keyboard!

Might help if you keep the brightness on the lower side, other than that seems like catch22

Also choose a darker theme for the keyboard.

Maddmatt said:
Also choose a darker theme for the keyboard.
Click to expand...
Click to collapse
That's why it kept happening for me... The I turn it to light mode and then the burn in goes away!

Dark mode will help reduce it, but I leave my phone set to auto switch light and dark mode based on sunrise and sunset, this way whatever app I'm using also switches, so the light and dark apps, flip button colours as well so anything white on a black screen also becomes black on a white screen so it helps reverse any burnin in that sense too.
For example, texting apps usually also have white icons at the top which can burn in with dark mode, so if you switch to light mode, the same icons are now black on a white screen, so the screen burns but the icons don't, so it all slowly burns in together and nothing becomes noticeable.
Been doing this after getting burnin on my S10+ using only darkmode and light icons left burnin. And then on my S20 Ultra I did the flipping light and dark mode and never had issues but I also had the full screen settings to hide the pinhole camera so it made the entire top black, and then One UI 3.0 came out and they removed that option so now you can't hide the pinhole camera and I had a burnin bar across the top from where it was black lol.
Now on my S21 Ultra I have the light and dark mode set to flip at sun rise and sun set, and I can't hide the pin hole so maybe third phone is the charm here and I won't have any burnin at all this time haha.
Hope this helps.

There is no burn in with AMOLEDs; they have a finite lifespan and get dimmer as they age before finally failing after many 10's of thousands hours.
Don't over drive them by using them at maximum or near maximum levels.
High energy blue pixels are the most susceptible to damage, red the least because of its longer wavelength.
Use manual brightness control. Avoid going much over 50%.
Using full brightness reduces pixel lifespan as probably does high temperatures ie direct sunlight.
Limit usage at full brightness by the second*.
Using manual control ensures you're aware of it and keeps the phone from auto jacking it up on you when not really needed.
Turn it down in low light; don't burn out your retina's as they aren't replaceable.
Use dark mode whenever possible. Use dark or black wallpaper. You Good Lock to get rid of the stutus bar icons; simply use the pull down notification screen.
My 10+ gets heavy usage every day with a lot of keyboard time. At 15+ months there is no discernible weakness or dead pixels of any color at any brightness level.
*this is especially important with static images

bANONYMOUS said:
Dark mode will help reduce it, but I leave my phone set to auto switch light and dark mode based on sunrise and sunset, this way whatever app I'm using also switches, so the light and dark apps, flip button colours as well so anything white on a black screen also becomes black on a white screen so it helps reverse any burnin in that sense too.
For example, texting apps usually also have white icons at the top which can burn in with dark mode, so if you switch to light mode, the same icons are now black on a white screen, so the screen burns but the icons don't, so it all slowly burns in together and nothing becomes noticeable.
Been doing this after getting burnin on my S10+ using only darkmode and light icons left burnin. And then on my S20 Ultra I did the flipping light and dark mode and never had issues but I also had the full screen settings to hide the pinhole camera so it made the entire top black, and then One UI 3.0 came out and they removed that option so now you can't hide the pinhole camera and I had a burnin bar across the top from where it was black lol.
Now on my S21 Ultra I have the light and dark mode set to flip at sun rise and sun set, and I can't hide the pin hole so maybe third phone is the charm here and I won't have any burnin at all this time haha.
Hope this helps.
Click to expand...
Click to collapse
you say you had burn in from keeping a black bar in the area where the pinhole was?
that doesnt make any sense. If it was black those pixels were off and there wouldnt be any burn in
ಠ_ಠ

Get Gboard, And change it to a dark skin, I've never had any problems

sesnut said:
If it was black those pixels were off and there wouldnt be any burn in
Click to expand...
Click to collapse
Reverse burn in, the screen area being used has a yellowish tone to it from being worn in over time, no matter how long the display is on, it's always burning in and the colour always adjusts over time from the burn in, it's the image retention burn in that people talk about, but the entire screen is always burning the entire time it's used. So by never using the top area the pixels are fresh and have a cooler tone to them than the rest of the screen as a result of this.

VICosPhi said:
Might help if you keep the brightness on the lower side, other than that seems like catch22
Click to expand...
Click to collapse
Indeed. And to add, perhaps occasionally change from white to black keyboard to even things out.

This is a good one. Says something about fast charging and not showing this message again. Guess they forgot to check don’t show again.

No offence but:
Pay 1.2K for phone after you see super HDR, huge brightness etc. and then limit everything to minimum? Seriously?
If I see them, I will ask EE(my phone provider) to replace it. I had same issue with OP 7 Pro, screen burn ins, they have replaced phone.

joloxx9joloxx9 said:
No offence but:
Pay 1.2K for phone after you see super HDR, huge brightness etc. and then limit everything to minimum? Seriously?
If I see them, I will ask EE(my phone provider) to replace it. I had same issue with OP 7 Pro, screen burn ins, they have replaced phone.
Click to expand...
Click to collapse
Some countries like the UK have better consumer laws than others.

Sukrith said:
Hello all, my past 3 AMOLED phones have been facing burn-in where the keyboard is displayed as I tend to chat a lot! Can anyone give me an option to avoid it? Please don't troll and say use less keyboard!
Click to expand...
Click to collapse
From normal use there will be no burnin. However, if you keep your display on showing the keboard all the time it will burn in. Also pixels start to burn in once they are on

kpwnApps said:
From normal use there will be no burnin. However, if you keep your display on showing the keboard all the time it will burn in. Also pixels start to burn in once they are on
Click to expand...
Click to collapse
Mate - I had burn ins on my screen from things like clock etc, you cannot get rid of them, and it is a design flown, as long there is nothing in instruction etc.

joloxx9joloxx9 said:
Mate - I had burn ins on my screen from things like clock etc, you cannot get rid of them, and it is a design flown, as long there is nothing in instruction etc.
Click to expand...
Click to collapse
Samsung shifts the AOD clock to help prevent this. However I use only tap on AOD now.
Perps know the deal, organic LEDs have a finite lifespan. Yeah you can drive your car as fast as it will go but you probably don't because you know it wouldn't last very long.
You wonder why the price tag keeps going up?
Freebies are never free.
Using in direct sunlight or at 80+% is just asking for it. In most cases completely avoidable. One can at least limit the time of use at full brightness and not have a homescreen that looks like a Vegas billboard.

blackhawk said:
Samsung shifts the AOD clock to help prevent this. However I use only tap on AOD now.
Perps know the deal, organic LEDs have a finite lifespan. Yeah you can drive your car as fast as it will go but you probably don't because you know it wouldn't last very long.
You wonder why the price tag keeps going up?
Freebies are never free.
Using in direct sunlight or at 80+% is just asking for it. In most cases completely avoidable. One can at least limit the time of use at full brightness and not have a homescreen that looks like a Vegas billboard.
Click to expand...
Click to collapse
So they should not sell them in countries like Spain etc as there is too much sun

joloxx9joloxx9 said:
So they should not sell them in countries like Spain etc as there is too much sun
Click to expand...
Click to collapse
I live in Texas desert, the sun here is intense.
It burns out LED traffic lights all the time; OLEDs are far less tolerant.
Simply use in the shade.
The individual pixels are microscopic. That they work at all is amazing let alone being capable of high lumen output with extremely excellent color/gamma rendering.
The AMOLED matrix has 10's of thousands of active solid state components not just the OLED pixels themselves. All are hest sensitive plus the fact the display is helping to dissipate mobo heat while producing heat of it's own. The most heat sensitive component, the OLED is smack on top of this glass heatsink*.
Direct sunlight in especially high ambient temperatures is a real bad plan. You can fry any display like this.
Know, understand and respect their limitations. You will be rewarded with a long lived gorgeous display.
*glass is a good thermal insulator. Do tempered glass protective screens increase the thermal burden? Most likely. If cool at first the added mass will be protective but once the device (or the sun) heats that mass up things will go down hill from there and the display temperature will rapidly climb.

joloxx9joloxx9 said:
So they should not sell them in countries like Spain etc as there is too much sun
Click to expand...
Click to collapse
Common sense should prevail I guess. I live in a place hotter than Spain. If I were to use my device in the middle of the day in bright sun light it’ll cook after 15mins. Hence why I don’t. But then would any other device.

blackhawk said:
I live in Texas desert, the sun here is intense.
It burns out LED traffic lights all the time; OLEDs are far less tolerant.
Simply use in the shade.
The individual pixels are microscopic. That they work at all is amazing let alone being capable of high lumen output with extremely excellent color/gamma rendering.
The AMOLED matrix has 10's of thousands of active solid state components not just the OLED pixels themselves. All are hest sensitive plus the fact the display is helping to dissipate mobo heat while producing heat of it's own. The most heat sensitive component, the OLED is smack on top of this glass heatsink*.
Direct sunlight in especially high ambient temperatures is a real bad plan. You can fry any display like this.
Know, understand and respect their limitations. You will be rewarded with a long lived gorgeous display.
*glass is a good thermal insulator. Do tempered glass protective screens increase the thermal burden? Most likely. If cool at first the added mass will be protective but once the device (or the sun) heats that mass up things will go down hill from there and the display temperature will rapidly climb.
Click to expand...
Click to collapse
And this was me think you lived in the Mojave desert.