Database Develop

[Q] Strange problem with Kies Mini

I'm having a problem with Kies Mini that I haven't seen discussed here and am hoping someone can help. When I start up the program I get the intro splash screen but after a few seconds the Mini window just whites out. I think the program is still running when this happens, and it even seems to recognize the usb-attached Captivate. But it's impossible to use with the blanked window. If it matters, I run Windows 7 64 bit.
Does anyone have an idea about what's going on? Is there a way to get Kies Mini to work on my PC?
Thanks in advance,
DW

Never saw that, but i can offer some kies mini suggestions:
1. Try connecting phone first and going into Kies mode on phone, after phone says connected, then open Kies mini (this is the only way mine works)
2. Kies Mini seems to dislike the "generic" Samsung drivers - so make sure those are not installed.
3. If you want to start over, uninstall Kies, Kies Mine, and any Samsung drivers in add/remove programs; then reboot and install captivate specifice drivers, then Kies Min
4. Plug phone in and fire up Media Player mode disconnect, then try Mass storage mode - doing these modes helps windows install the correct drivers for all functions
Hopefully some of this will help....

[Q] Problem while connecting to Kies

Hi,
I am having a strange problem while connecting my Galaxy S to kies. I've seen all related threads on this forum but none of them worked for me.
When I start kies and connect my phone to my PC. The kies just keeps on trying to connect to the phone but never connects.
That means the phone is detected by PC but Kies cannot make a connection to it. I tried reinstalling Kies Drivers but it didn't work either.
Here is the Kies and mobile Firmware version that I am using:
Kies: 2.0.0.11044_11
Firmware: I9000DDJG4

adilshoukat said:
Hi,
I am having a strange problem while connecting my Galaxy S to kies. I've seen all related threads on this forum but none of them worked for me.
When I start kies and connect my phone to my PC. The kies just keeps on trying to connect to the phone but never connects.
That means the phone is detected by PC but Kies cannot make a connection to it. I tried reinstalling Kies Drivers but it didn't work either.
Here is the Kies and mobile Firmware version that I am using:
Kies: 2.0.0.11044_11
Firmware: I9000DDJG4
Click to expand...
Click to collapse
Have you tried completely uninstalling Kies, rebooting PC and then a fresh install of an older version of Kies?

[SOLVED] P7300 can't connect via USB, Windows 7 64

Used to work fine, last time I connected was doing an upgrade about 3 weeks ago to the UCLA modem and kernel and 2.3.6 ROM.
Today I tried to connect via USB to transfer a new book I'd downloaded, and Windows didn't recognize the device. Has the error USB Device not recognized.
It shows on the device in the status area that MTP is installed, and it says on the device that USB is connected.
Tried everything. I have the latest version of Kies, uninstalled and re-installed. Deleted the device, let windows re-install it. The tablet charges fine via the same cable. I've tried different USB ports.
My Samsung Galaxy S2 Skyrocket connects on the same computer, seen by Kies, can transfer USB. Works on the same USB port!
And of course I have USB debugging turned on.
Any thoughts. I am certain it was due to the change of ROM.

Bump........

Hi Harry_fine,
Try it :
- Disable usb debug mode
- Lock the screen <-- very important step.If you don't do this, kies doesn't recognize the Tab*
- Connect Tab via USB to Win7 64Bit
- Start Kies
To get kies to recognize the tab, you need to have the original touchwiz launcher set as the default launcher
I seen this on other post. May be it can help you.
Good luck.

harry_fine said:
Used to work fine, last time I connected was doing an upgrade about 3 weeks ago to the UCLA modem and kernel and 2.3.6 ROM.
Click to expand...
Click to collapse
Are you sure you are in correct forum? I have never heard about UCLA modem or 2.3.6 ROM for GT8.9
Latest modem we have is KJ6 and Android version should be 3.2

Sorry, I was confusing this with my Galaxy S2 Skyrocket.
This is 2.6.36.3 kernel, Android 3.2, which I think is the latest official stock for the Tab. I think I used P7300XWKL4_P7300ATOKI1_P7300XXKJ6_HOME.tar.md5 for the upgrade.

Didn't work, same problem. Anyone else?

Tried a solution I found online, found some very long file extensions on the SDCARD, removed them, rebooted phone, and now no problem connected as a drive using MTP, and installing driver.

so what's the solution??

lastiko said:
so what's the solution??
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=31929746&postcount=236
Simply install the drivers, reboot the PC, then connect the device.

subtil123 said:
Hi Harry_fine,
Try it :
- Disable usb debug mode
- Lock the screen <-- very important step.If you don't do this, kies doesn't recognize the Tab*
- Connect Tab via USB to Win7 64Bit
- Start Kies
To get kies to recognize the tab, you need to have the original touchwiz launcher set as the default launcher
I seen this on other post. May be it can help you.
Good luck.
Click to expand...
Click to collapse
it really works out.......thank you :good:
i have a galaxy note 10.1 and it didnt recognize not even the Adapter Cable.....

I have Samsung P7300
just want to root it, but my PC does not even recognize it. not even Kies..
done all the things searching on XDA and other sites, but still the same Problem,
I cant even find the MTP thing under USB Storage.
I can Connect my Samsung galaxy S Plus i9001 to it.
i have installed/uninstalled Drivers, and kies many times.
My problem is why there is NO MTP Option in this device, it is not even rooted.
.

[Q] Cannot connect to kies

hey guys
i am not able to connect to kies.
It always show some error asking to activate usb debugging and says connect in pc studio mode
i uninstalled and reinstalled kies but still not working
when i connect my phone to pc it recognizes the hon and also starts charging
plz help

sitanshu91 said:
hey guys
i am not able to connect to kies.
It always show some error asking to activate usb debugging and says connect in pc studio mode
i uninstalled and reinstalled kies but still not working
when i connect my phone to pc it recognizes the hon and also starts charging
plz help
Click to expand...
Click to collapse
Disable USB debugging.

i have disabled usb debugging but sam problem continues ..
this has happened after i got an update on kies

Update Kies and also try different USB ports.

tried all things but cannot connect to kies
the message is shown as
reconnect the device in samsung kies mode
current connections not supported by kies
i have disabled the usb debugging mode from setting>application>development>usb debugging
can someone help me with this
thanks

I have the same problem. Anyone know what to do?

Same problem here.. think it's modded ICS rom related... hope it'l get solved once official ICS gets released...
Sent from my GT-N7000 using xda premium

im on stock LA4

On my build I've found that my front usb ports fail when connecting to kies 99% of the time, but back ports are pretty reliable.
I take it you don't have root or cwm? These will affect kies connection. Also if you've frozen any samsung apps, it's likely kies will fail. To be honest, even when I was fully stocked it failed often, buggy as hell.
Another thing to try, put it in usb storage mode, connect in a back port so it loads drivers, disconnect. Then attach in same port in normal mode. Sometimes this can help. If no luck, try kies wifi after having attached in usb storage mode.
Good luck.
Sent from my GT-N7000 using xda premium

No root and kies wifi also fail :/

Had the same problem. Windows 7 home, 64-bit.
Today I shut down the Samsung Note, then put it on again and ..... no problem with the connection to KIES. I hope it will connect again tomorrow and on.

Actually i unonstalled the kies firat and then all samsung drivers(this is imp. And must)......reinstalled them and connected the phone
Now all good kies recognises my phone
Sent from my GT-N7000 using xda premium

ICS and Kies are not compatible.
Sent from my SGH-I777 using XDA

CaliCal said:
ICS and Kies are not compatible.
Sent from my SGH-I777 using XDA
Click to expand...
Click to collapse
Kies is there only on Samsung issued firmware..
Kies will not work on anything that is custom .. be it GB or ICS

Seems this problem has resurfaced. I am on ICS - upgraded via Kies, then rooted.
Now Kies gives me the 'usb debugging' error, regardless of what is set for USB debugging and will not connect.
This is an updated Kies - and it appears there is an updated HK ICS rom out.
Comments?
Thanks

Cannot connect to Kies: neverending "connecting"

I've latest KIES version, the tab is rooted and cwmodded but stock rom. When I try to connect it to kies I get a neverending "connecting", so basically it never establishes a connection. I tried reinstaling drivers and with and without debug usb, but no luck. Do you have any clue?

same as my tab,
Sent from my GT-I9300 using xda app-developers app

Problem with KIES
My tablet is not rooted, it have stock rom, haven't changed anything. I have installed latest KIES on my laptop with Win 7 x64. When I try to connect my tablet to PC, I can access it's contains, but if I try to connect to KIES it say: Cannot start service on the device. Please disconnect and reconnect the device. I try that too, but every time it's the same. I have tried to re-install KIES couple of times, but it's always the same story... Anybody have some ideas?

I able to connect in the pass, that was how I get android 3.1 upgraded to 3.2
Sent from my GT-I9300 using xda app-developers app

I had the same issue, then I reinstalled the drivers, REinstalled KIES and there even was some messing around in "services". for WIFI connection thou, but it fixed my connection issue via cable.

When I bought my "8.9 tab wifi only"and plugged it up for the first time i had no problems using kies. It updated to 3.2 the NEVER worked again.Once you install kies it installes your drivers. If you uninstall kies it will ask if you want to keep the drivers or uninstall them."KEEP THE DRIVERS" I don't use kies at all. I use drag-n-drop to transfer files.You may also notice at times when moving files"mostly video" that windows explorer will crash"may just be my p.c." but a way around that is to simply zip the file,move it to your device,unzip from device using a file manager,I use "file manager HD"

Galaxy Tab 8.9 not connecting to Kies
Same problem here, Connected first time to Kies but since updating Kies I have never been able to connect.
Uninstalled and Reinstalled various times, restarting computer but still inop.

kies has many problems in its own software... ur pc can see it very well... samsung released a "Piece of Cr*P" software to just show themselves... Kies isnt really useful for anything rather than updates and syncronizing...
I saw someone posted a quote from samsung about the kies problem, and the only answer was its kies thats messing, not the tablet
I had this problem and I fixed it by reinstalling kies and basically enabling WIFI synk from pc (Kies setup guide) and after that it works from the USB.
(sorry for typos)

I had a similar problem but I ended up downloading the latest version of keis first. I also checked to make sure my computer was up to date with the latest usb drivers. After an update the Samsung keis software recognized my tab and was up and running.
Sent from my GT-P7310 using Tapatalk 2

first you should have usb debugging off
second, I tried all sorts of solutions (like uninstall/ install back again for kies or drivers and so on). I think there is a problem with the drivers.
If you plug in your tab, go to device manager and look for unknown devices or so (entries with exclamation marks and so )
I got it installed as samsung composite usb but also got part of the drivers not being correctly installed ( PCI flash memory having exclamation mark)
the only solution I found was to factory reset the tab. I did this and the tab is now recognized by Kies via USB without doing any additional work to the drivers or kies installation
latest kies version as of the post date, Windows 7 professional x64.
I still don't know if it was some wrong setting for an app or the firmware itself had something messed.
by the way, the tab was only 2 weeks old and it didn't connect from the very first time although the tab was just out of the box with no root/CWM recovery. just everything stock with normal apps and it didn't connect.

it happen to my nexus, but when I change to other PC, it working fine.. my 8.93G connecting very good for this moment and hope it will till i sell it..