Related
What is happening? Pulled battery 5 times already today...what should I do and would pulling battery as often as this affect my phone or battery?
-------------------------------------
Sent via the XDA Tapatalk App
Anyone?
-------------------------------------
Sent via the XDA Tapatalk App
What sort of set up are you running there?
Stock, non-rooted N1? Or did you upgrade to FroYo over an existing install using Paul's zip? Any applications installed? When is the phone freezing?
Would love to help, but I think we're going to need a little bit more information from you first.
What sort of set up are you running there?
Stock, non-rooted N1? Or did you upgrade to FroYo over an existing install using Paul's zip? Any applications installed? When is the phone freezing?
Would love to help, but I think we're going to need a little bit more information from you first.
Click to expand...
Click to collapse
Previously rooted N1 back to stock rom prior installing froyo from Paul's direct install file for rooted N1 because I lacked stock recovery image.
Basic apps installed like ebuddy news apps etc. didn't install anything different from old install.
Like I mentioned phone stalls in while in sleep mode. Need to pull battery. Cannot soft or hard reset phone.
Ive been reading a lot on xda and didnt notice this occurring in pther phones thats y i decided to open a new thread.
Any help is appreciated thanks!
-------------------------------------
Sent via the XDA Tapatalk App
rensky said:
Previously rooted N1 back to stock rom prior installing froyo from Paul's direct install file for rooted N1 because I lacked stock recovery image.
Basic apps installed like ebuddy news apps etc. didn't install anything different from old install.
Like I mentioned phone stalls in while in sleep mode. Need to pull battery. Cannot soft or hard reset phone.
Ive been reading a lot on xda and didnt notice this occurring in pther phones thats y i decided to open a new thread.
Any help is appreciated thanks!
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
Did you wipe? If not, usually a wipe helps. I wiped and have not had a single issue of FC...Freezing or anything. I went from Enom to Wipe to Paul's Zip with Radio.
I have the same problem. Until now the screen stayed black after the other party ended the call. Had to pull battery 3 times.
Problem exists even after reflashing, wiping and clearing storage.
Im om pre-rooted frf50 from paul. Gonna try with an older radio..
Previously rooted N1 back to stock rom prior installing froyo from Paul's direct install file for rooted N1 because I lacked stock recovery image.
Click to expand...
Click to collapse
Did you wipe? If not, usually a wipe helps. I wiped and have not had a single issue of FC...Freezing or anything. I went from Enom to Wipe to Paul's Zip with Radio.
Click to expand...
Click to collapse
I did wipe prior flashing to Paul's zip with radio.
-------------------------------------
Sent via the XDA Tapatalk App
I have the same problem. Until now the screen stayed black after the other party ended the call. Had to pull battery 3 times.
Problem exists even after reflashing, wiping and clearing storage.
Im om pre-rooted frf50 from paul. Gonna try with an older radio..
Click to expand...
Click to collapse
Can u post whether flashing with an older radio will help and provide link to the older radio? Thanks! Hope it works for you.
-------------------------------------
Sent via the XDA Tapatalk App
rensky said:
Can u post whether flashing with an older radio will help and provide link to the older radio? Thanks! Hope it works for you.
-------------------------------------
Sent via the XDA Tapatalk App
Click to expand...
Click to collapse
I am testing with 4.04.00.03_2
http://forum.xda-developers.com/showpost.php?p=6026480&postcount=3
SurfHost said:
I am testing with 4.04.00.03_2
http://forum.xda-developers.com/showpost.php?p=6026480&postcount=3
Click to expand...
Click to collapse
does it work?
Im having similar issues with my 2.2 installation. I have it installed on my wife's non-rooted N1.
Not just that but the market is not even usable. Even if I clear cache.
Again, her phone is not rooted, I wipped everything from her phone then applied Froyo and its been a nightmare. Her phone isn't even stable enough to use and I cant seem to figure it out.
I need to find a way back to 2.1 without having to root her phone. She is adamant about me not doing that to her phone even though Ive rooted all the phones I've ever used with no issues.
I was having the same problem on my N1. Started suddenly two days after the manual upgrade to 2.2. The phone would either freeze to a black screen or sometimes the live wallpaper would continue but the phone was unresponsive even to the power button. Needed to pull the battery to restart.
It stopped after I:
* Turned off live wallpaper
* Uninstalled LauncherPro Beta
* Removed the Pure Calender Widget (was broken after 2.2 update anyway)
* Charged the battery (was down to below 10% when it started happening repeatedly).
Anyone one of them (or none of them) could have been the culprit. My guess it was one of the last two (PureCalender or battery) but haven't had time to troubleshoot it. Try some of these and see if it helps.
Ive tried all that on her phone. I just wiped it again completely and re flashed just in case that was the issue. Phone still had all the issues described in this thread.
I wiped the sd card, wiped all previous system files via the stock recovery and re flashed the update zip. You cant get anymore clean than that and its still so unstable the phone its unusable. I have to either hope soft booting works or pull the battery as a last ditch.
Is there any way I could downgrade her phone to 2.1 without rooting? I tried the shipping rom in the sticky above but it seems that isn't totally legit for stock use because the phone doesn't like how its signed.
I guess I could call google/htc tomorrow but who knows where that'll get me. The only bonus iud that her phone is not rooted so she didn't really have her warranty voided.
-------------------------------------
Sent via the XDA Tapatalk App
I was having the same problem on my N1. Started suddenly two days after the manual upgrade to 2.2. The phone would either freeze to a black screen or sometimes the live wallpaper would continue but the phone was unresponsive even to the power button. Needed to pull the battery to restart.
It stopped after I:
* Turned off live wallpaper
* Uninstalled LauncherPro Beta
* Removed the Pure Calender Widget (was broken after 2.2 update anyway)
* Charged the battery (was down to below 10% when it started happening repeatedly).
Anyone one of them (or none of them) could have been the culprit. My guess it was one of the last two (PureCalender or battery) but haven't had time to troubleshoot it. Try some of these and see if it helps.
Click to expand...
Click to collapse
I was worried if I was the only one with this problem. Phone improved today (3rd day of using) but I didn't do anything to it. Only hanged once when someone called. Hanged on calling in screen and had to pull battery.
Only once compared to 7 times yesterday!
-------------------------------------
Sent via the XDA Tapatalk App
rensky said:
does it work?
Click to expand...
Click to collapse
Yes until now it does. Sometimes the power button is reacting a little late but i havent had to pull the battery yet with the older radio.
You might want to download it again and flash that to see if you had a corrupt download. First copy all data from the sd and partition it. Just make everything fat. I havent used the stock recovery in ages so I cant recall if you can partition from there, if you cant, do it on the pc. Wipe everything that the stock recovery can wipe. Then try to flash your new download of the update. You can do this fairly quickly and its worth a try before you go through the process of reverting to 2.1.
krabman said:
You might want to download it again and flash that to see if you had a corrupt download. First copy all data from the sd and partition it. Just make everything fat. I havent used the stock recovery in ages so I cant recall if you can partition from there, if you cant, do it on the pc. Wipe everything that the stock recovery can wipe. Then try to flash your new download of the update. You can do this fairly quickly and its worth a try before you go through the process of reverting to 2.1.
Click to expand...
Click to collapse
I'll give this a shot when I get home from work. I'll report back on if it works or not. Thanks for the idea.
Interesting, not that I'm complaining, but after a few days of using 2.2 it seems more stable now....? haven't had any freezes today...yet.
Power button response also getting better.
-------------------------------------
Sent via the XDA Tapatalk App
I haven't had any issues for a few days as well. Still wondering if it had to do with the battery level.
-------------------------------------
Sent via the XDA Tapatalk App
SurfHost said:
I have the same problem. Until now the screen stayed black after the other party ended the call. Had to pull battery 3 times.
Problem exists even after reflashing, wiping and clearing storage.
Im om pre-rooted frf50 from paul. Gonna try with an older radio..
Click to expand...
Click to collapse
Older radios are not 100% compatible.
I'm not new to this sort of stuff either. I used odin one time on my phone with no issues what so ever. my wife just had to make a warranty claim on her phone and we just got the replacement, asked her if she wanted me to root and put cognition on and she said sure
Well it had stock 2.2 on it and it wouldn't install clockwork recovery. upon reading that it was the update causing the problem I figured id just use odin to take the phone back to 2.2. I used a brand new charge cable I've only had for 3 weeks and things started fine but eventually the screen went black and odins progress bar stopped moving... 15 mins went by and nothing was happening... so I knew it was messed up and I unplugged it...
And $125 later I have an ins replacement on the way. Understand that I've been doin this for six months and this is the first time I've ever had a problem... so what happened? major hit to my confidence here!
Sent from my SAMSUNG-SGH-I897 using XDA App
Cor-master said:
I'm not new to this sort of stuff either. I used odin one time on my phone with no issues what so ever. my wife just had to make a warranty claim on her phone and we just got the replacement, asked her if she wanted me to root and put cognition on and she said sure
Well it had stock 2.2 on it and it wouldn't install clockwork recovery. upon reading that it was the update causing the problem I figured id just use odin to take the phone back to 2.2. I used a brand new charge cable I've only had for 3 weeks and things started fine but eventually the screen went black and odins progress bar stopped moving... 15 mins went by and nothing was happening... so I knew it was messed up and I unplugged it...
And $125 later I have an ins replacement on the way. Understand that I've been doin this for six months and this is the first time I've ever had a problem... so what happened? major hit to my confidence here!
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Your prob is due to the new phones that come with 2.2 don't always work with one click Odin. Should use the recovery work around for it instead
should of known....ugh... wish I would of known this yesterday I would of been $125 richer and minus one angry wife. What about my phone now? its runing cognition 4.4.2. In light of what's happened I'm thinking about going back to stock myself and staying there... Will odin work on my phone or is there another way?
Sent from my SAMSUNG-SGH-I897 using XDA App
you could use the Odin one click for JH6, that'll take you back to eclair and you can use the Kies mini to update to 2.2 KB1
or...
you could use full odin to flash the 2.3.3 basic theres a great TUT for it. let me grab some links...
the TUT; http://forum.xda-developers.com/show...&highlight=tut
the odin to Eclair: http://forum.xda-developers.com/showthread.php?t=731989&highlight=odin+one+click
if your going to choose the gingerbread path make sure you READ a lot.
And I wouldn't lose to much confidence over it. If you look at some of the "big shots" they usually have hard-bricked a captivate.
Thanks for the reply... yeah my confidence is bruised but its hard to turn back now. Just def don't ever wanna find myself in this situation ever again. I am interested in going to gingerbread, in fact very interested. I've started to look into it I'm gonna read more before I make the big jump.
Sent from my SAMSUNG-SGH-I897 using XDA App
Thanks for the reply... yeah my confidence is bruised but its hard to turn back now. Just def don't ever wanna find myself in this situation ever again. I am interested in going to gingerbread, in fact very interested. I've started to look into it I'm gonna read more before I make the big jump.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Good to know, just follow the tutorial to a T and you'll be all set
Sent from my captivate flying firefly!
Different versions of the captivate brick when you use the 1 click Odin. Use this:
http://forum.xda-developers.com/showthread.php?t=995143
Wow same thing happened to me aswell, it scares you for future flashes.
Sent from my SAMSUNG-SGH-I896 using XDA App
Next time, (hopefully there won't be a next time for you) you should first hit up samsung warranty first. If you have att, try them before samsung. I hard bricked my phone, sent it to samsung, they fixed it, no charge and sent it back. It took about 12 days, but it was FREE. Just an fyi.
Sent from my GT-I9000 using XDA App
Jeepin' Rock Climber said:
Different versions of the captivate brick when you use the 1 click Odin. Use this:
http://forum.xda-developers.com/showthread.php?t=995143
Click to expand...
Click to collapse
What happens if your running a gingerbread rom with updated bootloaders and you decide that you want to go back to froyo and elair. Is your only option odin one click to restore the bootloaders?, what if your captivate is one of those unlucky ones that like to brick with odin one click? Would you be stuck on gingerbread?
You can use 2.2 roms with gb bootloaders, they are backwards compatible. Just make sure there are no bootloaders in the rom you flash.
Sent from my GT-I9000 using XDA App
Oh I see thanks.
Sent from my SAMSUNG-SGH-I897 using XDA App
Wait so if i flashed gingerbread bootloaders and my phone is not compatible with odin one click, is there no way to get back onto froyo/eclair bootloaders? I understand that you can still flash froyo roms without bootloaders but you can always make a mistake and flash froyo bootladers bricking your phone.
You can use the regular JH6 flash back just not the one with the three button mod, this is because the three button mod replaces 1 out of 2 bootloaders and they won't match but the JH6 only replaces both (or none not sure) and they do match
Sent from my captivate piecing together mosaic!
What's the difference between jf6 and jh6?
Sent from my SAMSUNG-SGH-I897 using XDA App
Check stuff from studacris on this forum. He's very knowledgeable and helpful. I saw somewhere where he wrote about using odin one click to flash stock with any build. You'll get a bootloop, or a soft brick, and then put in download and flash the jf6 secure with odin. That way you have boots and stock. Don't quote me on any of this. I'm going off memory and might have some of this wrong. Don't want anyone mad at me for the wrong info. Just read into his posts, before trying any of this. You'll definitely learn a lot.
Sent from my SAMSUNG-SGH-I897 using XDA App
This was what I was taking about.
studacris said:
sounds like you have a later build phone that doesnt like odin one click...thats all your gonna get out of it is a bootloop
get into download mode and use this package:http://forum.xda-developers.com/showthread.php?t=995143
if you go to gingerbread and want to revert back to stock bootloaders you will have to use one click, even though you will end up in a bootloop and then use the package i posted to get it up and running completly sotck.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I897 using XDA App
Sent from my SAMSUNG-SGH-I897 using XDA App
Hi all,
Sorry if i sound stupid, but I am new to all of this. I am trying to flash a gingerbread ROM onto my Rogers branded captivate. Currently I am running Rogers stock Froyo.
I have rooted and unlocked my phone using one click root, and the SGS unlock tool from the android market. I have also applied Ryans OCLF. I have busybox installed and the lasted version of Rom Manager.
However, every time i go to backup my stock rom using rom manager, nothing happens. I try to first flash the Clockwork Mod recovery, select the Captivate file and let the phone reboot, black screen with a yellow exclamation point in a white triangle with a Droid device laying under it. It will sit there forever until I manually restart the phone, at which point it acts fine.
I have backed up using titanium backup but cannot do it thru ROM manager. I have read countless forums, but it havent found a solution that works.
So i decided to proceed without a backup. I tryed to put the phone in download mode using the buttons so that I can flash it using ODIN but it doesnt go into download mode using any of the buttom press methods. I have tried to reinstall the packages from the boot menu, but i then get an error saying "e: failed to verify whole signature...."
I have also put a copy of the recently leaked gingerbread rom on my SD card and tried to install the ROM using rom managers install ROM from SD card, but i get the same black screen with yellow exclamation point and nothing happens until i maually start the phone.
I have no clue what I am missing? How to fix this? I have read and watched so many tutorials, followed all the steps. THey seem so easy on paper, but nothing that is supposed to happen, happens for me. Anyone have any suggestions on what I am doing wrong?
Please help!!
You need to follow installation instructions in the thread for whatever GB rom you are installing TO THE LETTER.
Which one are you trying?
You need to search for fixing the 3e recovery. 3e won't let you install custom roms. Also rom manager is just a gui interface for clockwork mod so in. wouldn't use it
Sent from my GT-I9000 using XDA App
cappysw10 said:
You need to follow installation instructions in the thread for whatever GB rom you are installing TO THE LETTER.
Which one are you trying?
Click to expand...
Click to collapse
I was trying to install the Official Gingerbread 2.3.3 for Captivate that was just leaked for the ATT captivate. I beleive the build number is I897UCKF1.
I do remember seeing the 3e recovery in the boot menu. Thanks alot, I will try to find a recovery fix and try that, then post the update.
Thanks alot for the suggestions so far. Its greatly appreciated!
Please for the love of all that is good in the world, do some research before you brick yourself for good. All of your issues would have not happened had you read more first before jumping in. I have seen far to many of these types if threads lately. Yes it takes a few hours to go through the threads but you save yourself the time you would spend (sometimes days) fixing your mistake.
zelendel said:
Please for the love of all that is good in the world, do some research before you brick yourself for good. All of your issues would have not happened had you read more first before jumping in. I have seen far to many of these types if threads lately. Yes it takes a few hours to go through the threads but you save yourself the time you would spend (sometimes days) fixing your mistake.
Click to expand...
Click to collapse
Your absolutely right, I did ALOT of reading, been doing so alot over a few weeks. Unfortunately, (or perhaps, I did not do enough digging) none of the tutorials, even the ones for beginners that i found on this forum mentioned anything about finding a fix for the 3e recovery. No one mentioned that the 3e Recovery bundled with the Rogers version of Froyo did not allow the install of custom roms, it also did not allow backups. Thanks to Crystalhand for letting me know this.
Anyway i found this link which helped:
http://forum.xda-developers.com/showthread.php?t=909213
I am FINALLY able to make a full backup image of my stock ROM and apps using CWM. This puts me more at ease now knowing i can also revert to stock if i install a rom that is not working properly for me.
The backup is completing as I type this. I will update again once I am able to install the gingerbread Rom I wanted to install.
Thanks again to all of you for the help!
that backup is not to restore the stock rom directly from whatever you flash. that is an imaage of your set up on stock rom. so you have to use odin to flash back to that stock rom you are on then restore that backup and it will be like you never flashed anything at all. if you just restore that backup onto the custom rom you flash it will not work properly.
the app backup your making with titanium backup will restore your apps on whatever you flash, but the rom backup doesnt work like that.
I would suggest using designgears odin 1 click, becuase no offence but you seen new and that would be least likely way for you to hard brick going to gb... Good luck
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Flashing is usually easy and safe (for the most part). But if something happends and it gets bricked u could always make/buy jigs. Easiest way to make I've seen is
forum.xda-developers.com/showthread.php?t=841512
Or you can buy them for about $8 maybe more depending your location (making em can cost less). The only thing I haven't tested the jig with is messed up bootloaders, example flashing gb bootloaders and flash froyo secundaries, everything else the jig works (atleast my experience)
Sent from my SGH-I897 running Cog 5 Beta 2
prbassplayer said:
Flashing is usually easy and safe (for the most part). But if something happends and it gets bricked u could always make/buy jigs. Easiest way to make I've seen is
forum.xda-developers.com/showthread.php?t=841512
Or you can buy them for about $8 maybe more depending your location (making em can cost less). The only thing I haven't tested the jig with is messed up bootloaders, example flashing gb bootloaders and flash froyo secundaries, everything else the jig works (atleast my experience)
Sent from my SGH-I897 running Cog 5 Beta 2
Click to expand...
Click to collapse
With messed up bootloaders you have to jtag
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
leezrd said:
With messed up bootloaders you have to jtag
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Well that's good to know. I'm not paying $150 for a jtag.
Sent from my SGH-I897 running Cog 5 Beta 2
$50 not $150.
prbassplayer said:
Well that's good to know. I'm not paying $150 for a jtag.
Sent from my SGH-I897 running Cog 5 Beta 2
Click to expand...
Click to collapse
Actually $50 by connexion 2005 but still expensive got something you don't need you to do
EDIT: Nevermind studacris beat me by a couple second to it
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
studacris said:
$50 not $150.
Click to expand...
Click to collapse
Oh? where?
Edit:
leezrd said:
Actually $50 by connexion 2005 but still expensive got something you don't need you to do
EDIT: Nevermind studacris beat me by a couple second to it
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
Click to expand...
Click to collapse
Dosen't he charge $50 for a fix? not the jtag itself?
Mobiletechvideos.com
WOW! HOLY CRAP THIS PLACE IS DEAD! Its been a while since I read around these Zio places. Yup, my ol Zio still bootlooped (its around here somewhere). I tried all the "guides" n zip's and skd's and all that other.....stuff, its koo gathering and installing stuff and gettin that lil rush of hope, but then one lil thing goes wrong or ain't in the step-by-step guied, BOOM- all bad, and nobody's around all of a sudden. Alot of HERE, TRY THIS POST FROM SO N SO (not for the Zio), GO TO BLAHBLAH.COM install that n profit (evil setup to rom someone's phone AND wipe it clean), BUT ITS ALL MY BAD, NEWBIE like me shouldn't mess with roots n roms. Don't get me wrong, if I can find somebody that would fix it for cash, id go back to my zio and chuck this HALLWIE A2 (whatever its called) to a dev. Well, I'm probly gona get smashed for posting this. DEEEEP BREATH........K, I FEEL BETTER NOW.
Now I'm soo broke I cant even pay attention!
What you need help on? Bootloop fix? I can help you. Pm me on the details. Could you still get into faatboot or recovery? What service sprint or cricket!?
Sent from my Zio using XDA App
My zio is messed up too. I have no home/launcher or whatever you wanna call it. I can't get to settings to enable usb debugging either so none of the adb stuff works for me (so far). New to this and I don't want to buy another phone just yet. More details can be provided as to how this happened if needed. ty.
Not sure where it is but there was a fast boot zip of launcher apk. If you boot your phone into fast boot and cwm copy the zip to the phone and then flash the zip to your Zio it should resolve the issue
Sent from my Zio
Krsmqn said:
My zio is messed up too. I have no home/launcher or whatever you wanna call it. I can't get to settings to enable usb debugging either so none of the adb stuff works for me (so far). New to this and I don't want to buy another phone just yet. More details can be provided as to how this happened if needed. ty.
Click to expand...
Click to collapse
I can make a launcher apk. flashable zip for ya,just let Me know.
Sent from my LG-P509 using xda premium
openZIO Rom issue
Hi, I just installed the openZIO 2.1.2 ROM. Everything worked fine, but after rebooting and going through the initial set up (i.e. the google user setup blahblah) the VTL Launcher continually force closes and I can't do anything but go back and recover my original boot.img has anyone else had this kind of issue? Any possible fixes? Any help would be appreciated, I know not to many people are in using the Zio forums anymore... but yeah.. Thanks in advance
Try Reflashing again
Sent from my LG-P509 using xda premium
I've actually already done that, and it's still doing the same thing. I've deleted and re-downloaded the ROM, and re-flashed it to my phone, and still having the same issue. VTL Launcher just continually force closes, and it sucks cause I've been waiting months to get to install the ROM cause I couldn't afford a new USB cord. I've read so much on this ROM and everything for the Zio and was excited to actually be able to overclock my phone, and get some pretty good performance boosts out of it. Now I got one, and can't get it to work.. what a sad day
Could you explain your steps when flashing?
Sent from my LG-P509 using xda premium
well I first move the .zip to the sd, then power down and boot up CWM, and "install from SD card" and once it's finished flashing, I reboot the phone. when it comes back up my kyocera logo comes back up and it takes me through the first-boot programming (google sign-in) and once I input my un/pw and sign in, it tells me that VTL had an error and must hit force close. and once I hit force close it continues to come up saying the same thing over and over again. so I rebooted my phone, still the same thing. SO I go back through and flash it back to my original boot.img. I have gone through and completely deleted the openZIO 2.1.2.zip file and re-downloaded it, and gone through the same steps to see if maybe it was just a bad file somehow. But to no avail, still having the same issues.
After you boot into cwm : wipe cache partition, then go into mounts and storage, format: system, data, cache :then go into advanced and wipe dalvick cache.
Now flash rom
Sent from my LG-P509 using xda premium
Ok just went through with what you had mentioned, and still getting the same results. "Sorry! The application VTL.Launcher (process android.process.acore) has stopped unexpectedly. Please try again. with the only option to force close. As soon as I force close, the same message pops up
Have you tryed flashing my rom?
I would try that, and see what happens.
You can always push a launcher with adb or Droid commander.
Sent from my LG-P509 using xda premium
doing this now actually.. been reading for the last hour or so and seems like you did some good work on the ROM. it's flashing now, hopefully all works well I'm excited to see how it goes.
Well it flashed and well... seems to be having a strange issue.
When switching screens, it seems to glitch out? Like you see the icons, and when you switch screens, it's like the icons move but it freezes different frames. imma re-flash it in the morning to see if that helps any.
XCmaster said:
doing this now actually.. been reading for the last hour or so and seems like you did some good work on the ROM. it's flashing now, hopefully all works well I'm excited to see how it goes.
Well it flashed and well... seems to be having a strange issue.
When switching screens, it seems to glitch out? Like you see the icons, and when you switch screens, it's like the icons move but it freezes different frames. imma re-flash it in the morning to see if that helps any.
Click to expand...
Click to collapse
Im outta suggestions, I think you might have a hardware problem, but can't be for sure on that.
I've never heard of anybody having that problem, let me know if you get the issue resolved
Sent from my LG-P509 using xda premium
could defiantly be, this phone is well over a year old and has been dropped quite a number of times lol.
XCmaster said:
could defiantly be, this phone is well over a year old and has been dropped quite a number of times lol.
Click to expand...
Click to collapse
Was your phone acting like that before you flashed openzio?
Sent from my LG-P509 using Tapatalk 2
Nope, I've never had these issues before. And I can still flash it back to my original boot.img and it works like before. I've never had any problems with it, so that's why I'm surprised this is happening lol
XCmaster said:
Nope, I've never had these issues before. And I can still flash it back to my original boot.img and it works like before. I've never had any problems with it, so that's why I'm surprised this is happening lol
Click to expand...
Click to collapse
I guess then its probably not a hardware issue.. hmm.. its almost Like the roms your flashing are getting corrupted some how.
Sent from my LG-P509 using Tapatalk 2
hmm.. .well maybe I'll format my sd and do a factory reset on the phone first, then try to flash the rom?
Hi all, I have looked all over the place, I need help.
Here are my Current "About Device"
Hardware Version: I800.0.3
Model Number: SCH-I800
Firmware: 2.3.5
Baseband Version S:I800.0.3V.E104
Kernel Version: 2.6.35.7-dsb9938.VZW.GTab.E104.1.1.2
I have looked at the "back to stock" threads, multiple DL links are no longer available.
I had rooted, and Flashed a "Cube" ROM quite some time ago. A while after that I messed something up with the built in "overclocking" type app. Set it to the side and kind of forgot about it. Fast forward to know, I would like to get it working for my son to use, but there are a few issues that keep us from using it. I kept getting all sorts of random force closes, so I was able to get in recovery, and tried to wipe everything. This somewhat worked for a while, but now I am getting a force close from Facebook (which isn't installed, and I have narrowed it down to a contact synching issue) and I keep getting a popup for an OTA system update. I have tried to do the update, but I think the recovery is keeping it from completing.
Long story short, I know this device is a bit older, but where should I start from? I am ok with a fresh, wipe everything start. Not looking for a crazy ROM, but just a everything works ROM. I am ok with GB, ICS, etc, I just want it to be fully functioning. I plan on adding the tablet on my account so I can stop tethering for my son to use it. This has been the only device I have ever needed to ask for help, I am just not so used to the ODIN type stuff.
Thanks in advance.
I tried to do a reset, and wipe from CW recovery. Then restore, it has been stuck on the black with white Samsung screen for about 10 minutes. Don't know what else to do right now.
Sent from my SCH-I605 using xda premium
http://forum.xda-developers.com/showthread.php?p=42913151
Sent from my GT-N7100 using xda app-developers app
priyana said:
http://forum.xda-developers.com/showthread.php?p=42913151
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Much appreciated, long/slow download, but hope it works.
Wish I could get into recovery, I would just flash from the card.
Sent from my SCH-I605 using xda premium
There's a very new thread that should help you get back to stock. http://forum.xda-developers.com/showthread.php?t=2383201
As far as what to put on it, I highly recommend this CM10.1 ROM. It runs very smoothly, but if you want to activate data, I think you have to go back a bit for a working kernel. http://forum.xda-developers.com/showthread.php?t=2043421 The CDMA version is the p1c.
I don't know if you have come across this yet, but unlike any device I had flashed before, the GTab recovery has to be flashed with a corresponding kernel. You can't just flash the recovery to get into recovery.