[Q] Help installing rom - Galaxy S I9000 Q&A, Help & Troubleshooting

Installed Simply Honey 2.3.4, cant acess clockwork recovery, try to apply update.zip in stock recovery but i get E:signature verification failed.

You need a kernel with CWM

Update.zip only worked with 2e recovery. As per above post, flash a custom kernel with cwm included.

i little more info please
Can someone please link to a working kernal and Odin instructions on how to flash
Thanks so much

the answer
Is here http://www.addictivetips.com/mobile/how-to-install-clockworkmod-recovery-on-samsung-galaxy-s-i9000/
stupid easy

Thanks for all the help peeps

Related

[Q] Unable to flash Clockworkmod recovery, please help!

I was having similar problem flashing before with same error. I used cf-root by chainfire and its working really well now. Maybe this will help you. link below
http://forum.xda-developers.com/showthread.php?t=788108
Use one of the above 2 posters options. The main problem is that you need to downgrade from the Froyo 3e recovery to 2e recovery, which is included in most custom kernels. After flashing CWM will work perfect.
Thanks for the help guys, installed SpeedMod and now it works fine!

[Q] Can't flash ClockworkMod Recovery mode

I have 3e Froyo, rooted with superoneclick and when I'm flashing to clockwork it goes straight to the stock recovery mode,
Do I need to root with another program ? (rooting manually gives me the "signature failed" error)
Thanks
Look at instructions in this thread to get 2e recovery first:
http://forum.xda-developers.com/showthread.php?t=886112
Once you have 2e recovery then you use it to apply update.zip of CWM without signature error.
IMPORTANT : Make sure you download the correct version of CF-root for your firmware.

[Q] CWM recovery how to?!

I got problem i can't get into CWM recovery i download update.zip and put it on sdcard but when i go recovery ( volume up, power, home ) and go ":apply update.zip" I got error...
E:failed to verify whole-file signature
E:signature verfication failed
instalation aborted
Phone is rooted without lag fix on. I am on stock 2.2 with 3e recovery.
PDA: XFJP7
PHONE: XXJPP
CSC: XXJP7
Any help to get into cwm recovery i want to put custom rom ( DOC ).
MeBeSad said:
I got problem i can't get into CWM recovery i download update.zip and put it on sdcard but when i go recovery ( volume up, power, home ) and go ":apply update.zip" I got error...
E:failed to verify whole-file signature
E:signature verfication failed
instalation aborted
Phone is rooted without lag fix on. I am on stock 2.2 with 3e recovery.
PDA: XFJP7
PHONE: XXJPP
CSC: XXJP7
Any help to get into cwm recovery i want to put custom rom ( DOC ).
Click to expand...
Click to collapse
with what did you root it? superoneclick? z4root?
you need to have recovery 2e, not 3e, becouse u can't apply update zips that are not signed. u can apply them only with recovery 2e.
just unroot, and root back again with whis
[21.12.2010][CF-Root v1.3] JPH/K/6/M/A/O/U/X/Y - su+busybox+2e, CWM compat!
download the JPO file, it will be just fine. read the instructions there on how to root. after rooting, leave the update.zip on sd card and enter recovery again. press install from update.zip and you will have CWM
cheers
|nvari said:
with what did you root it? superoneclick? z4root?
you need to have recovery 2e, not 3e, becouse u can't apply update zips that are not signed. u can apply them only with recovery 2e.
just unroot, and root back again with whis
[21.12.2010][CF-Root v1.3] JPH/K/6/M/A/O/U/X/Y - su+busybox+2e, CWM compat!
download the JPO file, it will be just fine. read the instructions there on how to root. after rooting, leave the update.zip on sd card and enter recovery again. press install from update.zip and you will have CWM
cheers
Click to expand...
Click to collapse
I did root with z4root. Are you sure i need to download JPO file? and i just need to flash it with odin?
yes, i had JP7 when i bought my phone, and i rooted with CF-Root-XX_XEU_JPO-v1.2-Busybox-1.17.1, i still have the file on the PC (now i'm on 2.2.1 JPY)
be carefull to have the corect drivers installed, cose' you will need odin.

[Answered] stuck on recovery verification error SGSI9000

I'm stuck in a strange problem on my Galaxy S I9000
i'm running firmware 2.3.3 gingerbread JPJV6
it is rooted
i installed rom manager
i hit Flash clockworkmod recovery (on rom manager)
choosed my phone *samsung galaxys i9000*
downloded and installed successfully (alleged)
hit reboot to cwm recovery (on rom manager)
it reboot .. Android system recovery <3e>
and in red text (E:failed to verify whole-file signature "and" E:signature verification failed)
.............................
i don't know what's wrong here ... all i wanted to do is to apply updatefile.zip of cyanogen mod ....
..............................
i downloaded the updatefile of CWM and renamed to update.zip and tried to update from the android system recovery 3e it gave me same red error
..............................
can some one help me here please i'm stuck and don't know what to do .
I had some kind of this message one time, try to go in download mode to write again the PIT file.
i didn't understand what you mean by write again the PIT file .... you meant open odin3 get another PIT file ? or re-flash the gingerbread and then root it all over again ? you think this would fix anything ? i'm still confused not sure what to do
If you want CM, just flash custom kernel as a PDA in Odin. You will get CWM.
Then go to CM thread and follow instrcutions.
one last question ........ can you suggest a kernel to me .. I'm on rooted 2.3.3 gingerbread JPJV6 ..
3e is your problem, it only allows Samsung-signed packages. I'm using ChainFire's CF-Root kernel with stock JVT (until I get TeamHacksung's ICS working properly!)
A7madramadan said:
one last question ........ can you suggest a kernel to me .. I'm on rooted 2.3.3 gingerbread JPJV6 ..
Click to expand...
Click to collapse
Well, if you're going to CM, it is same what kernel to use when flashing CM. Just pick one up, like Semaphore, download it, put it in Odin as a PDA, flash it. Then you have CWM. In CM you can't use what ever kernel you want
thanks i'll download semaphore kernel and see what's gonna happen i appreciate your help here really

[Q] android system recovery <3e>

Ok... from the top - I've done a good amount of flashing custom ROMs (B & N Nook and Captivate) and reading on forums but I'm currently stumped. I can't boot into the ClockworkMod recovery - instead I go to the stock android system recovery <3e>. This has been my complete procedure:
1 - Odin3 one-click downloader and connect phone in downloading... mode, click "start" to go back to stock
2 - odin one click "master clear"
3 - Samsung Kies update to Android 2.2 froyo and then Android 2.3 Gingerbread
4 - One click root
5 - Put .zip of ROM on internal sd root
6 - Odin3 v1.82 load ClockworkMod Recovery .tar
Now here is where I am stuck - I have the most up to date ClockworkMod Recovery but I can't boot into anything but the stock android system recovery <3e> (either through the app or by holding volume up and down and powering on) - where if I change the zip file name to update and try to apply update from sdcard I get an error that the signature verification failed. I'd like to install the latest build of ICS but I am just stuck - any help would be greatly appreciated!
Thank you,
You'll need a kernel with the non-3e recovery baked in. You can either flash a Gingerbread kernel with CWM (e.g. Boog's kernel) or flash a stock gingerbread rom with CWM in the kernel.
Ok - thank you. I have downloaded that Heimdall one-click .jar file. However I'm having trouble opening it... I feel really foolish ont his but if I extract the files I see a readme file that says I shouldn't be reading it and I have gone the wrong way. But if I open the unextracted file it tries to open in WinRAR and again non of the files seem like a program file that I can just open and run. Sorry about this...
No problem - just double-click the file. The .jar is an executable file that will install the necessary drivers, open the heimdall program, and get everything ready to flash. Once it's ready and sees your phone in download mode, all you have to do is click flash and it will do the rest.
I have now figured out ICS - I think I had the wrong .zip I was trying to install... Does the ICS allow for overclocking?
Ok - my apologies again for keeping going with this (but my main goal is to get to ICS) with that kernel it wouldn't let me install ICS (but I was able to do the latest CyanogenMod). On the Team Hacksung Wiki page FAQ on Galazy S it looks like CM7 kernels don't work - did the one I installed from the above thread have a CM7 kernel?
Does anyone know of a specific kernel I can use to go from stock 2.3.5 so I can boot into ClockworkMod Recovery and install the ICS zip?
I'm sorry - I needed to update or install Java... Then I needed to install the correct drivers - automatically routed to this through the Heimdall program so it was easy enough (I think this has to do with switching between ODIN and Heimdall). Thank you again so much for the help. Time to give ICS a shot
YouTube ics video I had the same issue boog kerneral with cwm baked in it att boot loaders follow the instructions I'm using works great
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Flash back to stock 2.1 which includes the 2e recovery which doesn't have signature checks. With that you can flash a cwm zip and get into the clockworkmod recovery. On the captivate you gotta reinstall the the update zip twice, once to install cwm, the other to actually go into cwm.
Sent from my glitched ICS Captivate using XDA App
cmilldrummin said:
Flash back to stock 2.1 which includes the 2e recovery which doesn't have signature checks. With that you can flash a cwm zip and get into the clockworkmod recovery. On the captivate you gotta reinstall the the update zip twice, once to install cwm, the other to actually go into cwm.
Sent from my glitched ICS Captivate using XDA App
Click to expand...
Click to collapse
I wouldn't recommend flashing back to 2.1, as it is much easier to simply flash a kernel with CWM baked in.
That is also an option, both able to be done with several clicks of a button.
Sent from my glitched ICS Captivate using XDA App
any help?
i try to enter to APPLY SDCARD:UPDATE.ZIP
but have the same error :
E: failed to verify whole-file signature
E:signature verifcation failed
i have galaxy i9000b
also have the superuser , 2.2.1 froyo and wanna upg to ice cream or anything new
i read i have to change the android systema recovery <3e> to 2e ??
here i found a lynck with 3e-fix-unzip-uninstall
but these is for Captivate and doesn't work for i9000b ?
Yea 3e recovery has a signature check, and clockworkmod zips are not officially "signed." Either flash back to stock 2.1 eclair which has 2e recovery w/o signature checks, or flash a custom kernel with cwm already included, as suggested above. I cannot speak for if the modded 3e recovery will work on an i9000b.
Sent from my glitched ICS Captivate using XDA App
Edit: this 3e mod should work on the i9000b, and has worked great for me http://forum.xda-developers.com/showthread.php?t=731989
Sent from my glitched ICS Captivate using XDA App
Thanks for this link

Categories

Resources