[Answered] stuck on recovery verification error SGSI9000 - Galaxy S I9000 Q&A, Help & Troubleshooting

I'm stuck in a strange problem on my Galaxy S I9000
i'm running firmware 2.3.3 gingerbread JPJV6
it is rooted
i installed rom manager
i hit Flash clockworkmod recovery (on rom manager)
choosed my phone *samsung galaxys i9000*
downloded and installed successfully (alleged)
hit reboot to cwm recovery (on rom manager)
it reboot .. Android system recovery <3e>
and in red text (E:failed to verify whole-file signature "and" E:signature verification failed)
.............................
i don't know what's wrong here ... all i wanted to do is to apply updatefile.zip of cyanogen mod ....
..............................
i downloaded the updatefile of CWM and renamed to update.zip and tried to update from the android system recovery 3e it gave me same red error
..............................
can some one help me here please i'm stuck and don't know what to do .

I had some kind of this message one time, try to go in download mode to write again the PIT file.

i didn't understand what you mean by write again the PIT file .... you meant open odin3 get another PIT file ? or re-flash the gingerbread and then root it all over again ? you think this would fix anything ? i'm still confused not sure what to do

If you want CM, just flash custom kernel as a PDA in Odin. You will get CWM.
Then go to CM thread and follow instrcutions.

one last question ........ can you suggest a kernel to me .. I'm on rooted 2.3.3 gingerbread JPJV6 ..

3e is your problem, it only allows Samsung-signed packages. I'm using ChainFire's CF-Root kernel with stock JVT (until I get TeamHacksung's ICS working properly!)

A7madramadan said:
one last question ........ can you suggest a kernel to me .. I'm on rooted 2.3.3 gingerbread JPJV6 ..
Click to expand...
Click to collapse
Well, if you're going to CM, it is same what kernel to use when flashing CM. Just pick one up, like Semaphore, download it, put it in Odin as a PDA, flash it. Then you have CWM. In CM you can't use what ever kernel you want

thanks i'll download semaphore kernel and see what's gonna happen i appreciate your help here really

Related

[Q] Clockworkmod Recovery error: signature verification failed!

Hi all,
I installed JPY (2.2.1) Rom on my SGS yesterday, rooted my phone with SuperOneClick.
Tested the phone, everything is ok and the root is also ok.
Then installed Clockworkmod, flash cwm recovery 2.5.1.2, click on Backup, the phone automatic rebooted but presented my with a normal recovery screen.
In it I can do something like; a factory reset, clean card data, restart or click on update.zip (I thing that goes to the update.zip that cwm put on my sdcard).
But when I click it gives this error:
Install from package...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Tried everything... What can I do in order to cwm works and backups my sgs??
All the help is appreciated...
Thanks,
you loose 2e recover when going to froyo.. needed for clockwork ..
flash a kernel that restores it ie
chainfire/cf or speedmod or backlight notifiction ie bln kernel.
lgkahn said:
you loose 2e recover when going to froyo.. needed for clockwork ..
flash a kernel that restores it ie
chainfire/cf or speedmod or backlight notifiction ie bln kernel.
Click to expand...
Click to collapse
So what are you saying is that CWR doesn't work with 3e recovery? Only with 2e?
Because 3e does not allow unsigned zips hence the error message..
Sent from my GT-I9000 using XDA App
Sâmes problem for me... No solution found yet ...
Sent from my GT-I9000 using XDA App
install CF-root http://forum.xda-developers.com/showthread.php?t=788108 to get 2e recovery then reflash CWM recovery and try again...
striken said:
So what are you saying is that CWR doesn't work with 3e recovery? Only with 2e?
Click to expand...
Click to collapse
ah ya.. the "needed for clockwork" in my original message pretty much states that.
android.francis said:
Because 3e does not allow unsigned zips hence the error message..
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks for the explanation,
Didn't know why it works with one and not the other...
Anyway, its working now, thanks for all the help!
For anyone that has the same problem, here is what I did:
Flashed the phone with I9000XXJPY and with Odin. You can find JPY here: http://www.multiupload.com/UHJNT0K1F2
Put PIT 512 in PIT and in PDA put the file JPY_JPY_JPY.tar (no repartition selected).
Shutdown the phone after it starts.
Start Odin again and in PDA put this file: CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
You can download it here:
http://forum.xda-developers.com/showthread.php?t=788108
After that you can install CWM. When you click in backup and the phone restarts see if 2e restore appears in top of the screen if so all is ok.
Also, if a normal screen appears just click in update.zip and after that you will see the cwm screen.
In the cwm recovery screen the sgs buttons are like this: back button is the “enter” and the “menu” is the back button.
P.S. If you need to install TPH for Portuguese language just tell me, cause the CSC installed is KOR and you don't have TPH in CSC file to install.
Once again, Thanks to all who help me!
striken said:
Thanks for the explanation,
Didn't know why it works with one and not the other...
Anyway, its working now, thanks for all the help!
For anyone that had the same problem, here is what I did:
Flashed the phone with I9000XXJPY and with Odin. You can find JPY here: http://www.multiupload.com/UHJNT0K1F2
Put PIT 512 in PIT and in PDA put the file JPY_JPY_JPY.tar (no repartition selected).
Shutdown the phone after it starts.
Start Odin again and in PDA put this file: CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
You can download it here:
http://forum.xda-developers.com/showthread.php?t=788108
After that you can install CWM. When you click in backup and the phone restarts see if 2e restore appears in top of the screen if so all is ok.
Also, if a normal screen appears just click in update.zip and after that you will see the cwm screen.
In the cwm recovery screen the sgs buttons are like this: back button is the “enter” and the “menu” is the back button.
P.S. If you need to install TPH for Portuguese language just tell me, cause the CSC installed is KOR and you don't have TPH in CSC file to install.
Once again, Thanks to all who help me!
Click to expand...
Click to collapse
Great explanation but for the record (for anyone looking for a solution), if you're already on a 2.2 firmware, you can simple start at the step of flashing a custom kernel that supports CWM (i.e. there's no need to first flash to JPY).
gtg2 said:
Great explanation but for the record (for anyone looking for a solution), if you're already on a 2.2 firmware, you can simple start at the step of flashing a custom kernel that supports CWM (i.e. there's no need to first flash to JPY).
Click to expand...
Click to collapse
That's a thing I didn't know.
Winrar is asking for a password?
imprezzadude said:
Winrar is asking for a password?
Click to expand...
Click to collapse
On what files?
On the I9000JPY file. Sorry i didnt specify. Been a loong day lol
I am Facing Similar problem...
i wanted to install new rom on my phone ...i.e. darky's v 8.0
so i rooted my phone with z4root, then downloaded the rom and the update.zip file for clockward mod on to internal sd card..
and when tried to run update.zip file in normal recovery mode to get into clockward recovery i got the same signature error
i looked for solutions..got to know about rom manager..downloaded it and installed clockward mod through it..and then tried to reboot into clockward recovery ...it will bring me to same normal recovery screen...so basically stuck and cant get to clockward recovery...please help
my phone details
model gt-i9000
firmware:2.2
baseband : i9000zsjpe
deepumalik said:
I am Facing Similar problem...
i wanted to install new rom on my phone ...i.e. darky's v 8.0
so i rooted my phone with z4root, then downloaded the rom and the update.zip file for clockward mod on to internal sd card..
and when tried to run update.zip file in normal recovery mode to get into clockward recovery i got the same signature error
i looked for solutions..got to know about rom manager..downloaded it and installed clockward mod through it..and then tried to reboot into clockward recovery ...it will bring me to same normal recovery screen...so basically stuck and cant get to clockward recovery...please help
my phone details
model gt-i9000
firmware:2.2
baseband : i9000zsjpe
Click to expand...
Click to collapse
How about
1. Repartition with a 512 pit from odin.
2. Flash Stock JM8 or JM9 (Usually i am flashing JM8 when things get messed)
3. Use update zip and install clockworkmod from it . (you will not have any signature errors because now you have recovery 2e)
4. Sometimes you will have to apply sd card update twice to get to CWM.
5. Vola, now you have working clockworkmod recovery and you can flash whatever the things you want with it
androidsl said:
How about
1. Repartition with a 512 pit from odin.
2. Flash Stock JM8 or JM9 (Usually i am flashing JM8 when things get messed)
3. Use update zip and install clockworkmod from it . (you will not have any signature errors because now you have recovery 2e)
4. Sometimes you will have to apply sd card update twice to get to CWM.
5. Vola, now you have working clockworkmod recovery and you can flash whatever the things you want with it
Click to expand...
Click to collapse
horrible suggestion you both need to search b4 posting.. been posted multiple at least 20 times now.. you DONT need to go install a new rom and blow everything away on your phone just to get 2e recovery so clockwork works.. search search.. there are kernels out there you can flash to get back 2e recovery
lgkahn said:
horrible suggestion you both need to search b4 posting.. been posted multiple at least 20 times now.. you DONT need to go install a new rom and blow everything away on your phone just to get 2e recovery so clockwork works.. search search.. there are kernels out there you can flash to get back 2e recovery
Click to expand...
Click to collapse
Oh yeah. forgot to mention it. there is a post that have a kernel which gives you recovery 2e on JPY firmware. (Don't know other firmwares has it or not)
Anyway, in my case i like to blow everything and start all over when i got messed up. because i don't use my sgs for very precious works. i'm just playing with it
Kudos to the lgkahn for bringing this kernel thing up
lgkahn said:
horrible suggestion you both need to search b4 posting.. been posted multiple at least 20 times now.. you DONT need to go install a new rom and blow everything away on your phone just to get 2e recovery so clockwork works.. search search.. there are kernels out there you can flash to get back 2e recovery
Click to expand...
Click to collapse
I am really a starter..when it comes to all this will be able guide me a little bit please..what exactly do you mean and what do i search for...thanks a lot for all your help...
Okay..seems like this thread is getting nowhere..
Go to the android development section and look for hardcore's speedmod kernel. Download the latest version and flash it via Odin.
Btw, let me give you a tip once you are in hardcore's thread. PLEASE READ THE FIRST 3-4 POSTS AND FOLLOW INSTRUCTIONS.
I don't think you are exerting enough effort to research here in the forum so I just gave you one of the simplest and shortest step to have CWM directly.
Sent from my GT-I9000 using XDA App
is it OK to use Stericssion autosin.bat to sign the update.zip downloaded by CWM and then flash it using recovery 3e? We will not have to flash the CF Kernel.

[Q] cwm not installing with recovery 3e

Ok so i just rooted my sgs with superoneclick and im trying to install cwm recovery but when it reboots its starts in my normal recovery (3e) and fails during install. Can someone guide me in the right direction?This is what it says:
installing package
Finding update package
Verifying update package
E:failed to verify whole file signature
E:signature verification failed
I have tried over a wifi connection and 3g but both to no avail.
Model GT I9000M
Firmware 2.3.3
Baseband I9000UGKG3
Kernel 2.6.35.7-I9000UGKG3
[email protected]#2
Build Gingerbread.GKG3
PS I have no problem flashing using odin and starting from scratch. I just want my phone to run to the best of its ability. So please reccomend the best build, rom, theme and apps to have too.
Thanks in advance to all responses.
well 3e recovery can't flash unsigned zips from recovery so try flashing another kernel via odin that has support for i9000m
Any ideas on the best kernel to flash that supports i9000m?
Sent from my GT-I9000M using XDA App
Since you know how to flash. Go to this link to download and flash JVT pda, kg3 modem and csc with 512pit in odin. It wont bootloop and then you can flash any jvt kernel as pda. http://forum.xda-developers.com/showthread.php?t=1102881
themate1987 said:
Since you know how to flash. Go to this link to download and flash JVT pda, kg3 modem and csc with 512pit in odin. It wont bootloop and then you can flash any jvt kernel as pda. http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
I am having the same problem on my Samsung Galaxy S GT-I9000.
Will the solution you have posted work for me too?
Yes. You can flash any kernel for gt-i9000 you want via odin. But make sure you flash correct version for your firmware or it will give you bootloop
Sent from my GT-I9000 using XDA Premium App
Many thanks! Going to try this now. Been wanting 4.0.1 on my SGS for ages.
Hello.
I'm having almost the same problem.
I can use the usb un the phone.
I have 3e recovery installed and i woul like to instal clockwork mode.
There's a different way to flash clockwork mode?
I've tried from RomManager but the signature is verified and doesn't work.
Thank you in advance.
iepuryla said:
There's a different way to flash clockwork mode? .
Click to expand...
Click to collapse
Yes, it should be flashed using Odin3, together with a kernel, will work better than ROM manger, so go here and follow the instructions.
Check this out! You , YES! you are an " Android ". Not your phone but U.​

ICS,Stuck in bootloop

guyz plz help me
i have been using teamhacksung's ics port on my i9000
nd now..i updated it to build 12 and everything was fine
i just it for about 12-15 hrs
and then it restarted...and i was stuck in a bootloop
then i removed the battery and tried to open cwm
but still i was in a bootloop
then i flashed speedmod kernel...
and ws able to open clockworkmod...but it was 2.5.1.0 and not 5.5
And i am not able to flash any rom coz i get (status 7) error
plzz help me
plz
plz
plz
did u do a nandroid backup,you could also try darky 10.2 re im not sure if it will work because you were on ics,you could ask one of the darkycrew on the darkyrom forum goodluck
Flash this ROM (Its Froyo 2.2.1) using Odin:
http://dl.dropbox.com/u/665428/AndroidWorld/Herstelbestanden/I9000XXJPU.zip
Make sure repartitioning is checked in Odin
PIT: s1_odin_20100512.pit
PDA: I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
PHONE: MODEM_I9000XXJPU.tar.md5
CSC: GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Flash.
Now you're back at Froyo 2.2.1
If you want CWM back flash speedmod K13E using Odin (make sure repartition is unchecked)
Put it in PDA
Flash
Link:
http://forum.xda-developers.com/attachment.php?attachmentid=566807&d=1302623831
Now you can flash any Rom you want again
[Solved]
I flashed boot.img file using heimdall
and it is working fine once again
Thanks Valinorian,you help me to!
Hello guys!
Im new to the forum but i was using teamhacksungs ics port since middle of december from build 6 on to build 12 without any problems. but last weekend (my i9000 has been on build 13 for some days) i took a look on my phone to get the time and then i saw it was booting. but nothing happened it was stuck in a bootloop.
i removed the battery for some hours and tried to boot but it still gets a bootloop.
im not able to get into recovery mode, only downloadmode is possible.
help me plz, what can i do?
thx for your answers
greets steve
Look three posts above yours. It is explained in detail what to do.
Does anyone READ around here?
boot into download mode...and use heimdall to flash boot.img(in the teamhacksung's rom)(any build)
and then boot again...it will surely boot...
but i recommend onecosmic's ROM
but u did not do the process flashing back to 2.2.1?
I have never used heimdall and im a noob in flashing (it was easy with cwm recovery and the ics port)
thank you very much! i got it
The bootloop problem was covered several times - it happens kinda randomly, so the best workaround would be:
1. If you can boot into recovery - flash the same ROM again.
2. If not - go into download mode, flash stock ROM, install ICS again.

[Q] android system recovery <3e>

Ok... from the top - I've done a good amount of flashing custom ROMs (B & N Nook and Captivate) and reading on forums but I'm currently stumped. I can't boot into the ClockworkMod recovery - instead I go to the stock android system recovery <3e>. This has been my complete procedure:
1 - Odin3 one-click downloader and connect phone in downloading... mode, click "start" to go back to stock
2 - odin one click "master clear"
3 - Samsung Kies update to Android 2.2 froyo and then Android 2.3 Gingerbread
4 - One click root
5 - Put .zip of ROM on internal sd root
6 - Odin3 v1.82 load ClockworkMod Recovery .tar
Now here is where I am stuck - I have the most up to date ClockworkMod Recovery but I can't boot into anything but the stock android system recovery <3e> (either through the app or by holding volume up and down and powering on) - where if I change the zip file name to update and try to apply update from sdcard I get an error that the signature verification failed. I'd like to install the latest build of ICS but I am just stuck - any help would be greatly appreciated!
Thank you,
You'll need a kernel with the non-3e recovery baked in. You can either flash a Gingerbread kernel with CWM (e.g. Boog's kernel) or flash a stock gingerbread rom with CWM in the kernel.
Ok - thank you. I have downloaded that Heimdall one-click .jar file. However I'm having trouble opening it... I feel really foolish ont his but if I extract the files I see a readme file that says I shouldn't be reading it and I have gone the wrong way. But if I open the unextracted file it tries to open in WinRAR and again non of the files seem like a program file that I can just open and run. Sorry about this...
No problem - just double-click the file. The .jar is an executable file that will install the necessary drivers, open the heimdall program, and get everything ready to flash. Once it's ready and sees your phone in download mode, all you have to do is click flash and it will do the rest.
I have now figured out ICS - I think I had the wrong .zip I was trying to install... Does the ICS allow for overclocking?
Ok - my apologies again for keeping going with this (but my main goal is to get to ICS) with that kernel it wouldn't let me install ICS (but I was able to do the latest CyanogenMod). On the Team Hacksung Wiki page FAQ on Galazy S it looks like CM7 kernels don't work - did the one I installed from the above thread have a CM7 kernel?
Does anyone know of a specific kernel I can use to go from stock 2.3.5 so I can boot into ClockworkMod Recovery and install the ICS zip?
I'm sorry - I needed to update or install Java... Then I needed to install the correct drivers - automatically routed to this through the Heimdall program so it was easy enough (I think this has to do with switching between ODIN and Heimdall). Thank you again so much for the help. Time to give ICS a shot
YouTube ics video I had the same issue boog kerneral with cwm baked in it att boot loaders follow the instructions I'm using works great
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
Flash back to stock 2.1 which includes the 2e recovery which doesn't have signature checks. With that you can flash a cwm zip and get into the clockworkmod recovery. On the captivate you gotta reinstall the the update zip twice, once to install cwm, the other to actually go into cwm.
Sent from my glitched ICS Captivate using XDA App
cmilldrummin said:
Flash back to stock 2.1 which includes the 2e recovery which doesn't have signature checks. With that you can flash a cwm zip and get into the clockworkmod recovery. On the captivate you gotta reinstall the the update zip twice, once to install cwm, the other to actually go into cwm.
Sent from my glitched ICS Captivate using XDA App
Click to expand...
Click to collapse
I wouldn't recommend flashing back to 2.1, as it is much easier to simply flash a kernel with CWM baked in.
That is also an option, both able to be done with several clicks of a button.
Sent from my glitched ICS Captivate using XDA App
any help?
i try to enter to APPLY SDCARD:UPDATE.ZIP
but have the same error :
E: failed to verify whole-file signature
E:signature verifcation failed
i have galaxy i9000b
also have the superuser , 2.2.1 froyo and wanna upg to ice cream or anything new
i read i have to change the android systema recovery <3e> to 2e ??
here i found a lynck with 3e-fix-unzip-uninstall
but these is for Captivate and doesn't work for i9000b ?
Yea 3e recovery has a signature check, and clockworkmod zips are not officially "signed." Either flash back to stock 2.1 eclair which has 2e recovery w/o signature checks, or flash a custom kernel with cwm already included, as suggested above. I cannot speak for if the modded 3e recovery will work on an i9000b.
Sent from my glitched ICS Captivate using XDA App
Edit: this 3e mod should work on the i9000b, and has worked great for me http://forum.xda-developers.com/showthread.php?t=731989
Sent from my glitched ICS Captivate using XDA App
Thanks for this link

Help getting cwm

Hey everyone, i currently own a rooted galaxy s i9000 that runs 3e recovery and a really buggy custom Israeli rom.
I would like to flash another rom but 3e needs rom verification or something like that so i can't really work through it.
I understand that i should use ODIN to flash CF-Root, but the rom has changed the build number somehow so i don't know which version to use.
Some info:
Android Number:2.3.3
Build NumberilotxRom JVH GINGERBREAD V1.1.2
If you could post a link to the right CF-Root and ODIN files i should use and some basic instructions i would be very grateful.
Thanks in advance, Daniel.
Download this "update.zip". Place it in your SD card. Power off and boot into recovery with the 3 button combination (press power, volume up and home button till you see the boot logo) and select "apply sdcard: update.zip". DO NOT DELETE THIS FROM SD. You should have CWM installed now. Let me know if you have any problem.
GendelD said:
Hey everyone, i currently own a rooted galaxy s i9000 that runs 3e recovery and a really buggy custom Israeli rom.
I would like to flash another rom but 3e needs rom verification or something like that so i can't really work through it.
I understand that i should use ODIN to flash CF-Root, but the rom has changed the build number somehow so i don't know which version to use.
Some info:
Android Number:2.3.3
Build NumberilotxRom JVH GINGERBREAD V1.1.2
If you could post a link to the right CF-Root and ODIN files i should use and some basic instructions i would be very grateful.
Thanks in advance, Daniel.
Click to expand...
Click to collapse
flash GingeBread 2.3.6(Maybe xxjvu or JW4) and flash cf-root.
you may follow this http://forum.xda-developers.com/showthread.php?t=2149455
to use custom rom GB 2.3.6 is a good start, if you want to flash cm10.1 i suggest after you flash CM7(GB) -> cm9 (ICS) ->CM10 (JB) to avoid lost imei.

Categories

Resources