Ok so i just rooted my sgs with superoneclick and im trying to install cwm recovery but when it reboots its starts in my normal recovery (3e) and fails during install. Can someone guide me in the right direction?This is what it says:
installing package
Finding update package
Verifying update package
E:failed to verify whole file signature
E:signature verification failed
I have tried over a wifi connection and 3g but both to no avail.
Model GT I9000M
Firmware 2.3.3
Baseband I9000UGKG3
Kernel 2.6.35.7-I9000UGKG3
[email protected]#2
Build Gingerbread.GKG3
PS I have no problem flashing using odin and starting from scratch. I just want my phone to run to the best of its ability. So please reccomend the best build, rom, theme and apps to have too.
Thanks in advance to all responses.
well 3e recovery can't flash unsigned zips from recovery so try flashing another kernel via odin that has support for i9000m
Any ideas on the best kernel to flash that supports i9000m?
Sent from my GT-I9000M using XDA App
Since you know how to flash. Go to this link to download and flash JVT pda, kg3 modem and csc with 512pit in odin. It wont bootloop and then you can flash any jvt kernel as pda. http://forum.xda-developers.com/showthread.php?t=1102881
themate1987 said:
Since you know how to flash. Go to this link to download and flash JVT pda, kg3 modem and csc with 512pit in odin. It wont bootloop and then you can flash any jvt kernel as pda. http://forum.xda-developers.com/showthread.php?t=1102881
Click to expand...
Click to collapse
I am having the same problem on my Samsung Galaxy S GT-I9000.
Will the solution you have posted work for me too?
Yes. You can flash any kernel for gt-i9000 you want via odin. But make sure you flash correct version for your firmware or it will give you bootloop
Sent from my GT-I9000 using XDA Premium App
Many thanks! Going to try this now. Been wanting 4.0.1 on my SGS for ages.
Hello.
I'm having almost the same problem.
I can use the usb un the phone.
I have 3e recovery installed and i woul like to instal clockwork mode.
There's a different way to flash clockwork mode?
I've tried from RomManager but the signature is verified and doesn't work.
Thank you in advance.
iepuryla said:
There's a different way to flash clockwork mode? .
Click to expand...
Click to collapse
Yes, it should be flashed using Odin3, together with a kernel, will work better than ROM manger, so go here and follow the instructions.
Check this out! You , YES! you are an " Android ". Not your phone but U.
Related
Hi all,
I installed JPY (2.2.1) Rom on my SGS yesterday, rooted my phone with SuperOneClick.
Tested the phone, everything is ok and the root is also ok.
Then installed Clockworkmod, flash cwm recovery 2.5.1.2, click on Backup, the phone automatic rebooted but presented my with a normal recovery screen.
In it I can do something like; a factory reset, clean card data, restart or click on update.zip (I thing that goes to the update.zip that cwm put on my sdcard).
But when I click it gives this error:
Install from package...
Finding update package...
Opening update package...
Verifying update package...
E: failed to verify whole-file signature
E: signature verification failed
Tried everything... What can I do in order to cwm works and backups my sgs??
All the help is appreciated...
Thanks,
you loose 2e recover when going to froyo.. needed for clockwork ..
flash a kernel that restores it ie
chainfire/cf or speedmod or backlight notifiction ie bln kernel.
lgkahn said:
you loose 2e recover when going to froyo.. needed for clockwork ..
flash a kernel that restores it ie
chainfire/cf or speedmod or backlight notifiction ie bln kernel.
Click to expand...
Click to collapse
So what are you saying is that CWR doesn't work with 3e recovery? Only with 2e?
Because 3e does not allow unsigned zips hence the error message..
Sent from my GT-I9000 using XDA App
Sâmes problem for me... No solution found yet ...
Sent from my GT-I9000 using XDA App
install CF-root http://forum.xda-developers.com/showthread.php?t=788108 to get 2e recovery then reflash CWM recovery and try again...
striken said:
So what are you saying is that CWR doesn't work with 3e recovery? Only with 2e?
Click to expand...
Click to collapse
ah ya.. the "needed for clockwork" in my original message pretty much states that.
android.francis said:
Because 3e does not allow unsigned zips hence the error message..
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
Thanks for the explanation,
Didn't know why it works with one and not the other...
Anyway, its working now, thanks for all the help!
For anyone that has the same problem, here is what I did:
Flashed the phone with I9000XXJPY and with Odin. You can find JPY here: http://www.multiupload.com/UHJNT0K1F2
Put PIT 512 in PIT and in PDA put the file JPY_JPY_JPY.tar (no repartition selected).
Shutdown the phone after it starts.
Start Odin again and in PDA put this file: CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
You can download it here:
http://forum.xda-developers.com/showthread.php?t=788108
After that you can install CWM. When you click in backup and the phone restarts see if 2e restore appears in top of the screen if so all is ok.
Also, if a normal screen appears just click in update.zip and after that you will see the cwm screen.
In the cwm recovery screen the sgs buttons are like this: back button is the “enter” and the “menu” is the back button.
P.S. If you need to install TPH for Portuguese language just tell me, cause the CSC installed is KOR and you don't have TPH in CSC file to install.
Once again, Thanks to all who help me!
striken said:
Thanks for the explanation,
Didn't know why it works with one and not the other...
Anyway, its working now, thanks for all the help!
For anyone that had the same problem, here is what I did:
Flashed the phone with I9000XXJPY and with Odin. You can find JPY here: http://www.multiupload.com/UHJNT0K1F2
Put PIT 512 in PIT and in PDA put the file JPY_JPY_JPY.tar (no repartition selected).
Shutdown the phone after it starts.
Start Odin again and in PDA put this file: CF-Root-XX_XEU_JPY-v1.3-BusyBox-1.17.1
You can download it here:
http://forum.xda-developers.com/showthread.php?t=788108
After that you can install CWM. When you click in backup and the phone restarts see if 2e restore appears in top of the screen if so all is ok.
Also, if a normal screen appears just click in update.zip and after that you will see the cwm screen.
In the cwm recovery screen the sgs buttons are like this: back button is the “enter” and the “menu” is the back button.
P.S. If you need to install TPH for Portuguese language just tell me, cause the CSC installed is KOR and you don't have TPH in CSC file to install.
Once again, Thanks to all who help me!
Click to expand...
Click to collapse
Great explanation but for the record (for anyone looking for a solution), if you're already on a 2.2 firmware, you can simple start at the step of flashing a custom kernel that supports CWM (i.e. there's no need to first flash to JPY).
gtg2 said:
Great explanation but for the record (for anyone looking for a solution), if you're already on a 2.2 firmware, you can simple start at the step of flashing a custom kernel that supports CWM (i.e. there's no need to first flash to JPY).
Click to expand...
Click to collapse
That's a thing I didn't know.
Winrar is asking for a password?
imprezzadude said:
Winrar is asking for a password?
Click to expand...
Click to collapse
On what files?
On the I9000JPY file. Sorry i didnt specify. Been a loong day lol
I am Facing Similar problem...
i wanted to install new rom on my phone ...i.e. darky's v 8.0
so i rooted my phone with z4root, then downloaded the rom and the update.zip file for clockward mod on to internal sd card..
and when tried to run update.zip file in normal recovery mode to get into clockward recovery i got the same signature error
i looked for solutions..got to know about rom manager..downloaded it and installed clockward mod through it..and then tried to reboot into clockward recovery ...it will bring me to same normal recovery screen...so basically stuck and cant get to clockward recovery...please help
my phone details
model gt-i9000
firmware:2.2
baseband : i9000zsjpe
deepumalik said:
I am Facing Similar problem...
i wanted to install new rom on my phone ...i.e. darky's v 8.0
so i rooted my phone with z4root, then downloaded the rom and the update.zip file for clockward mod on to internal sd card..
and when tried to run update.zip file in normal recovery mode to get into clockward recovery i got the same signature error
i looked for solutions..got to know about rom manager..downloaded it and installed clockward mod through it..and then tried to reboot into clockward recovery ...it will bring me to same normal recovery screen...so basically stuck and cant get to clockward recovery...please help
my phone details
model gt-i9000
firmware:2.2
baseband : i9000zsjpe
Click to expand...
Click to collapse
How about
1. Repartition with a 512 pit from odin.
2. Flash Stock JM8 or JM9 (Usually i am flashing JM8 when things get messed)
3. Use update zip and install clockworkmod from it . (you will not have any signature errors because now you have recovery 2e)
4. Sometimes you will have to apply sd card update twice to get to CWM.
5. Vola, now you have working clockworkmod recovery and you can flash whatever the things you want with it
androidsl said:
How about
1. Repartition with a 512 pit from odin.
2. Flash Stock JM8 or JM9 (Usually i am flashing JM8 when things get messed)
3. Use update zip and install clockworkmod from it . (you will not have any signature errors because now you have recovery 2e)
4. Sometimes you will have to apply sd card update twice to get to CWM.
5. Vola, now you have working clockworkmod recovery and you can flash whatever the things you want with it
Click to expand...
Click to collapse
horrible suggestion you both need to search b4 posting.. been posted multiple at least 20 times now.. you DONT need to go install a new rom and blow everything away on your phone just to get 2e recovery so clockwork works.. search search.. there are kernels out there you can flash to get back 2e recovery
lgkahn said:
horrible suggestion you both need to search b4 posting.. been posted multiple at least 20 times now.. you DONT need to go install a new rom and blow everything away on your phone just to get 2e recovery so clockwork works.. search search.. there are kernels out there you can flash to get back 2e recovery
Click to expand...
Click to collapse
Oh yeah. forgot to mention it. there is a post that have a kernel which gives you recovery 2e on JPY firmware. (Don't know other firmwares has it or not)
Anyway, in my case i like to blow everything and start all over when i got messed up. because i don't use my sgs for very precious works. i'm just playing with it
Kudos to the lgkahn for bringing this kernel thing up
lgkahn said:
horrible suggestion you both need to search b4 posting.. been posted multiple at least 20 times now.. you DONT need to go install a new rom and blow everything away on your phone just to get 2e recovery so clockwork works.. search search.. there are kernels out there you can flash to get back 2e recovery
Click to expand...
Click to collapse
I am really a starter..when it comes to all this will be able guide me a little bit please..what exactly do you mean and what do i search for...thanks a lot for all your help...
Okay..seems like this thread is getting nowhere..
Go to the android development section and look for hardcore's speedmod kernel. Download the latest version and flash it via Odin.
Btw, let me give you a tip once you are in hardcore's thread. PLEASE READ THE FIRST 3-4 POSTS AND FOLLOW INSTRUCTIONS.
I don't think you are exerting enough effort to research here in the forum so I just gave you one of the simplest and shortest step to have CWM directly.
Sent from my GT-I9000 using XDA App
is it OK to use Stericssion autosin.bat to sign the update.zip downloaded by CWM and then flash it using recovery 3e? We will not have to flash the CF Kernel.
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Best option for bell users is darkys rom. For further info check darky's rom info
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the <3e> recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Sent from my GT-I9000 using XDA App
Lyon huntington said:
I messed up my Bell SGS playing with odin.
Lost the 3 button options and ended up hacking a jig to get it into DL mode. done
Goal - a Functioning phone. Now what?
Thinking I should odin the I9000M_JL2_JL2_JL2_JL2_UG_BMC.tar.
But with or without repartition?
Can I use any 512pit?
I think repartitioning is where i messed it up.
Now all of this happened because I wanted seeARMS.JL2.v0.4 but couldn't update with the recovery mode.
Knowing that seeArms is my second (first?) goal, is there a different firmware I should flash something other than BMC to give me back update functions, but stable to resuscitate my phone?
There's ages of material here and I don't want brick my phone or waste time, I've done enough of that by myself.. now I'm looking for some expert opinion.
thanks
Click to expand...
Click to collapse
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
repartition yes? .pit universal?
Jason123420 said:
Flash the stock JL2 firmware with Odin the use super one click to root your phone then flash a new kernel with SGS Kernal flasher from the market... then u will have clockwork recovery then wipe and flash seeArms! Its a great rom but not as fast as darkys
Get the stock firmware from samfirmware.com u can get the .pit file from there to
Sent from my bell GT-I9000m using XDA App
Click to expand...
Click to collapse
So the stock JL2 that I have is a .tar and .dll
I have a 512.pit from a beta 2.2 , are they different?
Did I mention boot problems too? Hanging @ Samsung, no splash ani.
I guess the .pit means yes on repartition?
Thanks
Just use the stock firmware and .pit from samfirmware.com and when Odin is open do not tick off repartirion... just put the .pit in it's spot and the tar in th's PDA part and flash
Sent from my GT-I9000 using XDA App
Now I'm no pro... I just flashed a rom once and got stuck in a boot loop and this is what worked for me
Sent from my GT-I9000 using XDA App
Recovery back but can't mount /dev/block/stl10
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Sorry man like I said I'm no pro... ide flash stock jl2 back and send it back to Samsung for repair maybe they will do something for your warranty
Sent from my GT-I9000 using XDA App
Lyon huntington said:
Decided to try Darkys v9.2 Resurrection.. no go.
Flashed JL2 and got recovery back but crash after animation.
3e recovery shows me Can't mount /dev/block/stl10.
some threads say dead, others make ref. to old builds.
any current ideas?
thanks
Click to expand...
Click to collapse
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
It's Alive! - Can't mount /dev/block/stl10 fixed.
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
tsinc said:
Download a full firmware for your model and locale (with dbdata in it) and flash it with repartition with the pit proposed (samfirmware.com) then, I believe, you will have a full functioning phone. If everything is ok, then flash ... whatever.
Click to expand...
Click to collapse
Yes, do this. For repartition to work the .tar has to have dbdata.rfs, otherwise it won't work.
Then flash a speedmod kernel with odin for root/cwm and flash you're favourite custom rom
unlock&root owngrade or speedmod kernel? suggestions?
Forgot to mention that all this started after I got the phone back from Bell service after SD card failure.
I know mod methods changed with the latest firmware, as I had used the update.zip method that is now unavailable.
My phone went in unlocked and rooted
the phone came back re-locked (old code doesn't work? wtf?),
and it was unrooted w/3e recovery
Can the phone unlock code change?
Will downgrading to 2.1 make unlocking easier?
or is unlocking just as simple after a speedmod kernel with odin for root/cwm
Which is better?
downgrade the firmware to 2.1 and root using the old update.zip method or speedmod kernel?
Which kernel? (link please )
cheers
Lyon huntington said:
Hey All,
Got it all working again.
Repaired: Can't mount /dev/block/stl10
the fix: A full firmware (pda/csc/phone/pit) flash w/repartition.
Flashed w/repartition - I9000XXJP2.7p. (the only FULL firmware I had on-hand)
on reboot the system does a media check and was successful in reformatting and mounting the internal SD.
Phone didn't like the ROM and still logo of death, but..
A quick Jig into Download Mode..
Flashed I9000UGJL2_homebinary_add_param.tar with no repartition
(can't remember if I used .pit).
And Success!! my phone is alive and running 2.2
Thanks for the help, and hopefully this thread can help others.
Everyone should build/get a jig
There is nothing more awesome than being able to force download your non-booting phone.
I could not have done this repair without one.
http://forum.xda-developers.com/showthread.php?t=819551.
The only problem now is it's back to stock...
oh phone, how can I crash you next?
thanks again everybody!
Click to expand...
Click to collapse
All you did was flash UGJL2 with no repartition and it brought your phone back?
Kops said:
All you did was flash UGJL2 with no repartition and it brought your phone back?
Click to expand...
Click to collapse
You know what....I've been trying various combinations of CSC/MODEM/PIT and everything to get this phone running again.
All I did was select a FULL UGJL2, and thats IT. NO pit, NO repartition, and it worked
The best way to revive your I9000m is to first flash JPC (a three file ROM) with 512 PIT and repartition ticked. The phone will still be in a boot loop. Then flash the JL2 PDA without repartition or PIT. The best way to go back to stock! Has always worked for me. I9000m's are not the same as other I9000's and do not flash repartition and the PDA in the same flash! Good luck!
I'm stuck in a strange problem on my Galaxy S I9000
i'm running firmware 2.3.3 gingerbread JPJV6
it is rooted
i installed rom manager
i hit Flash clockworkmod recovery (on rom manager)
choosed my phone *samsung galaxys i9000*
downloded and installed successfully (alleged)
hit reboot to cwm recovery (on rom manager)
it reboot .. Android system recovery <3e>
and in red text (E:failed to verify whole-file signature "and" E:signature verification failed)
.............................
i don't know what's wrong here ... all i wanted to do is to apply updatefile.zip of cyanogen mod ....
..............................
i downloaded the updatefile of CWM and renamed to update.zip and tried to update from the android system recovery 3e it gave me same red error
..............................
can some one help me here please i'm stuck and don't know what to do .
I had some kind of this message one time, try to go in download mode to write again the PIT file.
i didn't understand what you mean by write again the PIT file .... you meant open odin3 get another PIT file ? or re-flash the gingerbread and then root it all over again ? you think this would fix anything ? i'm still confused not sure what to do
If you want CM, just flash custom kernel as a PDA in Odin. You will get CWM.
Then go to CM thread and follow instrcutions.
one last question ........ can you suggest a kernel to me .. I'm on rooted 2.3.3 gingerbread JPJV6 ..
3e is your problem, it only allows Samsung-signed packages. I'm using ChainFire's CF-Root kernel with stock JVT (until I get TeamHacksung's ICS working properly!)
A7madramadan said:
one last question ........ can you suggest a kernel to me .. I'm on rooted 2.3.3 gingerbread JPJV6 ..
Click to expand...
Click to collapse
Well, if you're going to CM, it is same what kernel to use when flashing CM. Just pick one up, like Semaphore, download it, put it in Odin as a PDA, flash it. Then you have CWM. In CM you can't use what ever kernel you want
thanks i'll download semaphore kernel and see what's gonna happen i appreciate your help here really
Hi,
I have a problem when trying to flash my galaxy s and install ICS Dark night v5.5.
When I try updating the kernel using ODIN, my phone gets into bootloop.
It is a froyo installed phone. Also, I am unable to get recovery mode. It enters download mode though.
Can anyone help me out in this??? I am very new to this stuff... I am a beginner...
Held up in this for a couple of weeks.....
Thanks,
Sridhar
If you can boot into download mode, use ODIN to flash a stable rom, then get CWM and your back to where you were, hold off the nightly builds or post in the Cyanogenmod official thread or forums.
Thanks a lot... That did work.. But now i have got Mobile network not available error after flashing.....
Probably best to mention which version of software you are using and the source...
Best option is to flash stock gingerbread version via Odin.
www . theandroidsoul . com / xxjvu /
sorry can't put correct address in yet dont have enough thanks...
it would be better to update to any stable stock rom, go to sammobile.com...
i suggest you update to the latest firmware or ics stock rom for i9000 via odin then root that firmware you have chosen(CF-ROOT) and then update the custom rom darknight v5.5 via cwm...
I think you need gingerbread bootloaders for ics.. You were on Froyo, so it won't work.. You'll need to install a stock gingerbread rom with the pit file and repartition.. After that you can try an ics rom..
I found this thread. After attempting to get CM9 onto my S it wouldn't boot so I used odin to install a stock from from sammobile but now the phone just boot loops.
Could someone please help me.
More info:
After the odin flash - I get a screen like the recovery menu saying things such as "E:Format_volume:rfs format failed on /dev/block/stl10" and things of a similar nature - will have to see what the others say.
Any ideas?
You probably flashed a rom without bootloaders. Try flashing a 3 file rom from here and repartition with 512 pit.
http://forum.xda-developers.com/showthread.php?p=14273101
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Thank you. Will try that tonight
Sent from my GT-I9000 using XDA
vanisleryan said:
You probably flashed a rom without bootloaders. Try flashing a 3 file rom from here and repartition with 512 pit.
http://forum.xda-developers.com/showthread.php?p=14273101
Sent from my I9000 running JW5 with Dmore3.3 and Semaphore 2.7.4
Click to expand...
Click to collapse
Thank you sooooo much that worked an absolute treat.
Sent from my GT-I9000 using XDA
Got it back to it's original state....would like to update to 4.1.1 of someone call tell me the correct files to use?
Thanks
Hi, I did a search but wasn't able to find an answer...
This is what was running on my phone:
AT&T Samsung Captivate SGH-1897 Rooted
Android V/ 4.0.4
Baseband V/ I9000UGKG3
Kernel V 3.0.8-g2311908/[email protected] #1
Cyanogenmod V/9-20120819-nightly-captivatemid
I placed these three zip files on to the phone:
cm-10-20121118-NIGHTLY-captivatemtd.zip
gapps-jb-20121011-signed.zip
kernel_V10_4_2_15.zip
I use recovery cwm 6.0.1.2 and did a backup
I then use it to install "kernel_V10_4_2_15.zip" it FAILED so I then used recovery to install "cm-10-20121118-NIGHTLY-captivatemtd.zip" it FAILED
So, I use recovery to put the backup on...and it show cyanogen (mod) 9 FLASHING and would NOT boot.
I went back to recovery....did advanced restore and restored BOOT SUCCESSFUL
then I restored SYSTEM SUCCESS
then I did reboot
the cyanogen (mod) 9 FLASHING and will not go any further.
I was trying to update the phone to 4.1.1 and now have NOTHING...
Can anyone help and tell me what I have to do. I can still get into recovery cwm 6.0.1.2
Thanks will be watching for some help...:crying::fingers-crossed:
MORE INFORMATION:
I went back into recover (after it would not boot the first time) and cleared the cache
this is the error report I received:
checking for extendedcommand
file not found
Wiping cache
formatting cache
mtd not erasing bad block @ 0x0x00100000
I can't partition unsafe device /dev/block/mmcblkopi
I can't format volume unknown, volume external_sd
I can't partition unsafe device /dev/block/mmcblk1p1
failed to mound /dev/block/mmcb1k0p2
invailid argument
Have you tried getting in DL mode and flashing stock KK4?
I think that's your easiest/fastest solution.
From there, flash corn kernel to get root and flash the ROM you want as per their instructions.
Stuck on the AT&T screen
BWolf56 said:
Have you tried getting in DL mode and flashing stock KK4?
I think that's your easiest/fastest solution.
From there, flash corn kernel to get root and flash the ROM you want as per their instructions.
Click to expand...
Click to collapse
Thanks...I flashed the KK4 and the corn kernel and I am STUCK on the AT&T screen. I can still get into download mode but no longer can I get CWM recovery...
Any suggestions?
Thanks
Donna aka gramme
I put the phone in DL mode and used:
i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe.exe
I am now at stock....how can I get to 4.1.1? Any help here? Do I just put on the Cyanogenmon10 or do I have to do something else. I am very confused now...not rooted either
Thanks
gramme66 said:
Thanks...I flashed the KK4 and the corn kernel and I am STUCK on the AT&T screen. I can still get into download mode but no longer can I get CWM recovery...
Any suggestions?
Thanks
Donna aka gramme
I put the phone in DL mode and used:
i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe.exe
I am now at stock....how can I get to 4.1.1? Any help here? Do I just put on the Cyanogenmon10 or do I have to do something else. I am very confused now...not rooted either
Thanks
Click to expand...
Click to collapse
What button combo are you using to get in recovery?
Also, I would suggest to re-download Corn kernel and re-flash it.
gramme66 said:
Thanks...I flashed the KK4 and the corn kernel and I am STUCK on the AT&T screen. I can still get into download mode but no longer can I get CWM recovery...
Any suggestions?
Thanks
Donna aka gramme
I put the phone in DL mode and used:
i897uckk4 Odin One Click CONTAINS Bootloaders, Re-partition, Full Wipe.exe
I am now at stock....how can I get to 4.1.1? Any help here? Do I just put on the Cyanogenmon10 or do I have to do something else. I am very confused now...not rooted either
Thanks
Click to expand...
Click to collapse
Now after getting back to GB 2.3.5 and I am rooted...I am NOT able to update to ICS 4.0.4 where I was...when I use the CWM recovery to flash the zip it says signature failed....Is there something that will flash a zip file via download mode?
Thans
ka
gramme66 said:
Now after getting back to GB 2.3.5 and I am rooted...I am NOT able to update to ICS 4.0.4 where I was...when I use the CWM recovery to flash the zip it says signature failed....Is there something that will flash a zip file via download mode?
Thans
ka
Click to expand...
Click to collapse
You're simply not rooted. go in recovery and make sure root is enabled (assuming you flashed corn kernel that is).
Was Rooted...all is fine now...
BWolf56 said:
You're simply not rooted. go in recovery and make sure root is enabled (assuming you flashed corn kernel that is).
Click to expand...
Click to collapse
Thanks for your response...I finally figured it all out!!!!!!!!!! My CWM was stock which is 3e recovery and requires signature verification....I had NOT use the corn kernel but flash some zip file that roots...don't remember the name. I then realized that it probably did NOT install CWM a newer version so I put the corn kernel on that would put on CWM that would work...Once I had the proper recovery on I was able to put my 4.0.4 back on and CMod9. Then nothing worked properly everything not working like Gmail Media something so I put on gapps the latest that didn't help. I put my TB on that didn't work well 5 failed....google mail would still not work and the something media kept giving a bad message...
I went into recovery and put on a recovery back up I had done 2 days ago and ALL is now WORKING great...
I still want to update to 4.1.1 Jelly Bean but the files I have don't work so I need to look around for a different ROM and ideas would help.
Thanks again for your time...
Donna aka gramme
I recommend this Rom by the Collective... http://forum.xda-developers.com/showthread.php?p=31145604
Sent from my SGH-I897 using xda premium
4-2ndtwin said:
I recommend this Rom by the Collective... http://forum.xda-developers.com/showthread.php?p=31145604
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
+1
10char