guyz plz help me
i have been using teamhacksung's ics port on my i9000
nd now..i updated it to build 12 and everything was fine
i just it for about 12-15 hrs
and then it restarted...and i was stuck in a bootloop
then i removed the battery and tried to open cwm
but still i was in a bootloop
then i flashed speedmod kernel...
and ws able to open clockworkmod...but it was 2.5.1.0 and not 5.5
And i am not able to flash any rom coz i get (status 7) error
plzz help me
plz
plz
plz
did u do a nandroid backup,you could also try darky 10.2 re im not sure if it will work because you were on ics,you could ask one of the darkycrew on the darkyrom forum goodluck
Flash this ROM (Its Froyo 2.2.1) using Odin:
http://dl.dropbox.com/u/665428/AndroidWorld/Herstelbestanden/I9000XXJPU.zip
Make sure repartitioning is checked in Odin
PIT: s1_odin_20100512.pit
PDA: I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
PHONE: MODEM_I9000XXJPU.tar.md5
CSC: GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Flash.
Now you're back at Froyo 2.2.1
If you want CWM back flash speedmod K13E using Odin (make sure repartition is unchecked)
Put it in PDA
Flash
Link:
http://forum.xda-developers.com/attachment.php?attachmentid=566807&d=1302623831
Now you can flash any Rom you want again
[Solved]
I flashed boot.img file using heimdall
and it is working fine once again
Thanks Valinorian,you help me to!
Hello guys!
Im new to the forum but i was using teamhacksungs ics port since middle of december from build 6 on to build 12 without any problems. but last weekend (my i9000 has been on build 13 for some days) i took a look on my phone to get the time and then i saw it was booting. but nothing happened it was stuck in a bootloop.
i removed the battery for some hours and tried to boot but it still gets a bootloop.
im not able to get into recovery mode, only downloadmode is possible.
help me plz, what can i do?
thx for your answers
greets steve
Look three posts above yours. It is explained in detail what to do.
Does anyone READ around here?
boot into download mode...and use heimdall to flash boot.img(in the teamhacksung's rom)(any build)
and then boot again...it will surely boot...
but i recommend onecosmic's ROM
but u did not do the process flashing back to 2.2.1?
I have never used heimdall and im a noob in flashing (it was easy with cwm recovery and the ics port)
thank you very much! i got it
The bootloop problem was covered several times - it happens kinda randomly, so the best workaround would be:
1. If you can boot into recovery - flash the same ROM again.
2. If not - go into download mode, flash stock ROM, install ICS again.
Related
Hi guys,
My first post, so don't be too harsh
So, I'm stuck with a boot loop. Here's what I did:
- flashed Gingerbread 2.3.3 XXJVK with PIT file via ODIN
- flashed supercurio kernel by ficeto using ODIN (PDA)
- copied Darky's V10 RC3 zip file on phone's sd card
- rebooted in Dark Core Recovery and flashed the Darky's V10 RC3 ROM
- no errors so far, everything went smooth.
But now I'm stuck in a boot loop.
Please advise & thanks !
I guess you have to flash stock rom (or Darky Resurr.) with odin :/
Working again!
I did everything from the beginning, except this time I used K13D instead of Supercurio.
And now it's working like a charm ...
Firmware 2.3.3
Kernel: 2.6.35.7-I9000XXJVK-CL75655 [email protected] #2
Build number: Darky's v10.0 RC3
Thanks again !
I was in the same situation. The idea is that you have to flash a compatible kernel for your ROM (ie : if you use 2.2.1 firmware you can basically flash any ROM from Speedmod`s kernel to Voodo LaggFix; if you are on 2.3.3 thare are few kernels available because the devs didn`t have enough time for compiling, etc. so you have to wait). Yesterday I tested 2.3.3 Darky 10.0 RC4 Gingerbread and I had a semi-lagg experience (the only cool thing is the animation when you scroll up or down - it`s a light). So I reflashed 2.2.1 with Darky Ressurection via Odin and then I put Ultimate ROM with DamianGto (latest) kernel - I score around 1900 in Qadrant with 1200Mhz OV and 24mv UV - but it`s cool and no lagg.
I was a begginer too, but from my experience if you have any problem (bootloop, freezeloop) go into download mode, prepare Odin and just flash the device again with Darky Ressurection 9.2 to make a safe downgrade (All info is in the .zip package, PDF format).
Hi guys,
i have also the problem with the bootloop. I can´t swich in cwm or anything else.
I hear a very fast speach and then the galaxy starts the next time.
I was updating from v9.5 to v10 RC6 follwoing this:
ww.darkyrom.com/community/index.php?threads/guide-installing-rc6-need-to-flash-dark_core_2-2-first.2382/[/url]
It was fine and the phone was working fine. then i have start the lagfix in cwm. since my phone is in bootloop.
Have any idea? plz help... and i´m sorry for my bad english...
the noise you are hearing is the lagfix being installed.
this is normal on darkys rom / voodoo kernels.
try again and give it 10 mins, if it still does not boot, re flash through odin and give it some time.
if you pull battery out / switch off whilst lagfix is being installed you will get serious issues.
Hi guys,
i have flashed Ficetos JVB a second time with odin 1.3. It does´t work at all. Bootloop is coming back after the restart.
Hi azzledazzle,
i have really done it maybe one hour ago... i mean to pull the battery out....
what can i do now to manage this problem?
kannixdafür said:
Hi azzledazzle,
i have really done it maybe one hour ago... i mean to pull the battery out....
what can i do now to manage this problem?
Click to expand...
Click to collapse
boot into download mode
flash darkys 9.2 resurrection edition through odin.
make sure you have pit and re-partition.
let it boot - 10 mins max
install whatever version of darkys you want in recovery menu.
Hi azzledazzle,
at first... thanks for your immediately help!
i have flashed darkys 9.2 resurraction edition... but it still in bootloop even after 10 min boottime... (can´t hear an noise this time)
have you any idea?
did you use 512 pit ? and did you check re-partition and finally did you load the .tar md5 into pda section ??
if you did all of that and it still didnt work.
flash back to stock eclair and try again
Hello,
I own a I-897 Captivate model, and I had a custom 2.3.4 gignerbread rom recently..
Latley I tried to move to cognition becuase the other rom did problems for me..
So I followed the guide, and when I first flashed the kernel I wasn't using any pit file..
So it's just stuck on odin with nothing happening, so I closed odin and rebooted my phone.
Then the phone showed me a logo with phone and computer with X between them.
So I flashed again using the pit then I got to the recovery, where I tried to install the cognition 5.2 without succes, it finished the install, but when I rebooted it just kept switching between the boot screen of AT&T and Galaxy S GT I9000..
So I tried to use my Nandroid backup, but it just won't work, I tried to install it manually and still it isn't working..
So I tried to instal my previous rom and succeeded, but now when I reboot it it just loading the Talon logo, finishes it and stuck on the end of the loading without any action...
So, I can use the download mode and odin.
What should I do?
Thank you very much.
What build number is your phone
Sent from my I897 using XDA Premium App
Okay, ive installed 2.1 stock and its works.
Now can someone give me step by step guide to install cyanogen rom or cogntion
or whats the best rom is.. Thanks.
Gibieyal said:
Okay, ive installed 2.1 stock and its works.
Now can someone give me step by step guide to install cyanogen rom or cogntion
or whats the best rom is.. Thanks.
Click to expand...
Click to collapse
Please I beg you to stop what you're doing and just Read, Read like your life depends on it and keep reading till you can flash with utter confidence least you permanently brick your Cappy.
Sent From My SGS Captivate 2.3.5 Biffmod
I have read tons of time,
I tried to install Cyanogenmod, but it seems when I get to the recovery it doesn't work..
I flashed the recovery through CWM, but its very limited and blue not bright green or yellow as always.
I only got 4 options:
Reboot
Re-Install packges
Wipe user data
Wipe cahce
How do I get my recovery work properly?
That's not CMW that's the regular 3e recovery. You'll need to flash a kernel with CMW built in or one with an alternate recovery (I usually use an Onix kernel)
Sent From My SGS Captivate 2.3.5
I've flashed a full gingerbread stock rom, with boot loaders and it works fine,
but now I can't get to the download mode, so I cant flash the rooted kernel..
I'm stucked unrooted, How can I root it?
It's Gingerbread 2.3.3 UCKF1 Build stock rom.
Pull out your battery, Sim, and SD card. Plug your usb cable into a usb port on the back of your computer then plug it into your phone. Hold volume up and down then reinsert your battery, should boot into download mode.
Sent From My SGS Captivate 2.3.5
Hi guys,
i just got a Galaxy S (international, germany) and wanted to flash Clockwork Mod so i can flash a custom rom (miui). I got it with version 2.2 so i rooted it with z4root 1.3 and then tried RomManager to get CWM on it. But it did always reboot into Samsung stock recovery mode. So i tried this Odin3 1.7 and flashed a Kernel and got into a bootloop (First this one, then i used the one promoted in this video (YouTube Video, description XDA Thread with promoted Kernel. Phone now stuck at booting (isn`t even bootlooping, just stuck at the GALAXY S GT etc. logo. I still can reach the Download Mode.
Can anyone please help how to get at least the phone working again I`m really desperatly.
Greetings from Germany & Merry Christmas
Alch
Install a new Rom with odin will make your phone boot again.
2.2 is probably too old now.
Upgrade to Gingerbread Stock using Odin. Turn on Repartition and follow the instructions to flash.
Download a Custom Kernel for the Gingerbread firmware that you flashed. Every Kernel except the stock comes with CWM Recovery.
Copy the MIUI zip file to sdcard and flash it with recovery. It should boot right up.
If you are still having bootloops, try doing a factory reset and then boot MIUI.
Don't try things that you aren't experienced with.
Anyway, download odin 1.85, flash stock Froyo, launch Kies, update to official Gingerbread, launch Odin, flash Semaphore Kernel and GG.
Merry Christmas!
How can i flash Stock Froyo/Gingerbread trough Odin? Can`t find anything usefull @ google
btw i can reach Recovery Mode (CWM / Speedmonk something)
(Kinda experienced by flashing around with my N1 for around 2 years now, but never heard about this Odin Program)
thanks for help anyway
AlchemistEDW said:
How can i flash Stock Froyo trough Odin? Can`t find anything usefull @ google
(Kinda experienced by flashing around with my N1 for around 2 years now, but never heard about this Odin Program)
Click to expand...
Click to collapse
I am not going to help you with this one. You need to get comfortable with the forum and its contents first. Read all the guides and stickies before proceeding with Firmware flashing. There are many different types of firmwares with Bootloaders which are often dangerous to flash and few without bootloaders. Hence, first go through the guides and go with the flashing only when you are confident that you are doing everything in right order.
http://forum.xda-developers.com/showthread.php?t=1379853
Just do what dhiru1602 says. after you flashed it with the latest Gingerbread ,
flash the cf-root kernel with odin . than download the latest galaxian/semaphore kernel, copy it to your internal sd-card and flash it with the app SGS Kernel Flasher . you can find that app on the market. good luck mate !
Thanks guys, u really saved christmas for me Just booted up the latest Miui Rom!
Happy Holidays
Alch
[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Odin doesnt care about whats currently on your phone . Just go to samfirmware. Com, find a nice stock rom (2.3.3) for i9000, and flash it with odin. If you dont know how to use odin: use the search button in the i9000 section ''how to use odin''. keep us updated / or if you have any other questions :thumbup:
Stoux
Edit: Check this thread out http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using xda premium
hey
when i screwed my sgs, odin + darky ressurection rom helped
i can't post a link , google "Darkys_v9.2_Resurrection_Edition.zip" ,though i can't remember if i used that version. some got removed, try to look for a sourceforge link. That still works
and see the reply above how to use odin
Hey,
There are also lots of tutorials on youtube, and other sites to show how to flash an original rom. I also screwed up my install of CM9. And then I followed this guide to get the original rom running again.
w w w.theandroidsoul.com/download-install-xxjvs-firmware-update-galaxy-s-i9000-to-android-2-3-5/
After that, use this link for rooting + CWM:
w w w.theandroidsoul.com/root-xxjvs/
Greets from Holland !
PS: can't link -_- so you have to copy and paste the URL.
Skeesicks said:
[email protected],
after successfully flashing CM9 to my Defy I convinced my friend to go to ICS as well...so far so good/bad!
I followed the guide to install CMW recovery and did a backup of the stock ROM.
After this I copied CM9 nightly and the google apps package to the internal memory...apperantely the zip package of the google apps was bad, so i tried to boot into CM9..it took a damn long time, so I removed the battery (OK, bad move...but so be it don't bit*h about it!)..CM9 booted but said someting about "encryption of the storage failed..please do a factory wipe"......I did so, using CWM recovery...which ended me up in a boot loop without having access to CMW recvry.
So I thought, flashing the zImage again with heimdall will have the bootloader rewritten (maybe the 2nd bad move this day) so I can access recovery again...I imagined zImage was kinda like a BIOS of a PC...apparently it is NOT
After some google-f00 I found out I have to flash an official FW from samsung, with repartitioning,using odin, am I right?
But the probel is, that they tell me to do a *#7465625# to find out details about the stock firmware...but this is not bossible because the phone hangs at the galaxy s boot logo.
So my question is...what can I do to access either recovery or the stock firmware with a phone stuck at boot logo (i can boot into download mode) and having only a nandroid backup of the stock rom?
Can anybody tell me what to do without spending 200 coins to obtain another SGS for my friend (Yeah, I told him that the risk is to brick the SGS, but I have a kind of guilty conscience.
Hope someone can help...
Thanks a lot!
Click to expand...
Click to collapse
hmmm... i read from another site there are some custom rom that requires the phone to be in a rooted stock rom or another custom rom...
example:
to install Galaxy S GT I9000 with Orange Amestris v7.3 ROM Custom Firmware you need to be on stock XWJW1 or XXJVU Firmware since the baseband of "amestris" would be on xwjw1 or xxjvu or custom rom with the same baseband...
what stock rom/firmware the phone was in anyway?im guessing gingerbread stock rom? you still got a chance to update it right since you can access download mode...
from what i can remember, i updated my boyfrnd's s2 from gingerbread to official ics from "sammobile".com (remove quote)
then updated it to a custom rom...
well this might be irrelevant but this is how i updated my galaxy s:
well on my galaxy s i updated it from gingerbread stock rom rooted to gingerbread miui then to ics miui andy's version, since im on ics i have successfully tried different ics custom rom like darknight, slimics, elite etc...
hope this kinda help =]
Thanks a lot...I flashed the original firmware (it didn't start properly, but I don't care) and with this was able to flash the zImage again...then I was able to access bootloader and reinstall CM9
Guys I've got a problem with my Galaxy S i9000 with CM9. It stopped working after restart (endless loop on Cyangenmod logo) and now I'cant get to recovery mode. Only download mode works, so I think that I must to flash it with ODIN. And there is a problem, because I can't find proper CM9 ROM files for ODIN. And what version of ODIN should I use? Now I've got 4.38 and phone is visible - it's OK?
I will be very pleased for ROM files to ODIN and some instructions how to flash it propely. I've read many threads from morning, but I can't find ROMs
Hi there,
afaik there are no CM Versions flashable via ODIN.Use ODIN to flash a Stock firmware, then install ClockworkModRecovery and Install CM9 via CWM.
You should try to take Out your Battery for about 5 minutes and try to enter Recovery Mode.
About the Odin Version: If you look at different "howto use ODIN tutorials" there are different Versions "recommended" I've used multiple ODIN Versions eg 1.3 / 1.83 and every Version made a good job.
Give this a try if Battery-out for 5 Minutes does't take you back to recovery
http://hdtechvideo.com/community/index.php?threads/flashing-rom-using-odin-step-by-step.64/
Regards
Geniac
Opson said:
Guys I've got a problem with my Galaxy S i9000 with CM9. It stopped working after restart (endless loop on Cyangenmod logo) and now I'cant get to recovery mode. Only download mode works, so I think that I must to flash it with ODIN. And there is a problem, because I can't find proper CM9 ROM files for ODIN. And what version of ODIN should I use? Now I've got 4.38 and phone is visible - it's OK?
I will be very pleased for ROM files to ODIN and some instructions how to flash it propely. I've read many threads from morning, but I can't find ROMs
Click to expand...
Click to collapse
Opson said:
Guys I've got a problem with my Galaxy S i9000 with CM9. It stopped working after restart (endless loop on Cyangenmod logo) and now I'cant get to recovery mode. Only download mode works, so I think that I must to flash it with ODIN. And there is a problem, because I can't find proper CM9 ROM files for ODIN. And what version of ODIN should I use? Now I've got 4.38 and phone is visible - it's OK?
I will be very pleased for ROM files to ODIN and some instructions how to flash it propely. I've read many threads from morning, but I can't find ROMs
Click to expand...
Click to collapse
you should flash the stock rom got 3 type file, that mean the file after download got pda, csc and modam file, like 2.3.6 XXjvu, please dont flash the file after download only have 1 file only, like XXjw5.