i have a rogers canadian captivate.rooted and unlocked.deleated stock tw launcher by mistake and did a hard reset.well on step 4 of the new set up process it says phone setup wizard not responding and askes to force close.and takes me right back to step 1 of set up.i know if i can get to the web and download a launcher than i can open it from notificatio bar. please help.
Can you push stuff through adb?
Sent from my SGH-T959V using XDA App
Juls317 said:
Can you push stuff through adb?
Sent from my SGH-T959V using XDA App
Click to expand...
Click to collapse
Since he just factory reset a stock rom, it isnt set to debugging mode, so adb isnt an option...
Good point...hmmmmmm
Sent from my SGH-T959V using XDA App
Because you cant push a launcher or get into any settings menu, my only suggestion would be to flash a new rom. And assuming that the rom you just flashed (being completely stock), you wont have the 3 button combo although I suggest you try it. (Im not sure about the combos for 2.2 roms).
If you cant get into recovery/download through any method, my next suggestion is to buy/build a JIG and force your device into download mode, by which you can use ODIN to flash a rom.
You can make a jig for about a dollar or buy one for about 10. (Best purchase i made). Just take a look around the forums for more info on this.
yes i can get into where it says reboot system now,reinstall packages delete data ya know. not much experiance
and i can still get the usb modes when i plug in usb. kies media player mass storage.just an amature
Not sure if it would work...but odin3 v1.0 had a option for enable debug .could he just do that? Then adb push /system/app/launcher.apk? See pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SGH-I897 using XDA Premium App
need more suggestions.paid 500 canadian with no contract.might as well of flushed it down the toilet
There is a Canadian Odin one click somewhere. Look harder.
Canadian one click using Heimdall not Odin. Good news is Heimdall is cross platform and can be used on PC, Mac, and Linux. Read the thread and the instructions are in the OP. Good Luck!
Here's the link http://forum.xda-developers.com/showthread.php?t=1191094
So give me the link
Sent from my GT-P1000R using XDA App
I have the heimdall ready and in download mode on captivate.ok where it says load package i hit browse and it takes me to all the files in heimdall but i dont know what to choose.this is how much of an ameture i am.i cant even flash a rom.pleas help me
Sent from my GT-P1000R using XDA App
Canadian odin one click? Need a link.ill try this one also
Sent from my GT-P1000R using XDA App
Can't you bypass phone setup? Maybe this video will help.
http://www.youtube.com/watch?v=L5XjF6sPef4&feature=youtube_gdata_player
Sent from my SAMSUNG-SGH-I896 using XDA App
http://forum.xda-developers.com/showpost.php?p=16098171&postcount=5
That's where the download is for the package for Canadian stock. I am not at my pc to walk you through where the package goes on Heimdall.
Sent from my blazing fast Captivate running Continuum GB ROM using Tapatalk Pro
thankyou soooooooo much. i decided to try your odin flash and worked very well.i cant believe how easy it was.only problem is i cant connect to samsung kies.but i dont care.who needs it for firmware update when i know how to flash roms now. again thank you.saved me alot of cash
jamesrfraser said:
thankyou soooooooo much. i decided to try your odin flash and worked very well.i cant believe how easy it was.only problem is i cant connect to samsung kies.but i dont care.who needs it for firmware update when i know how to flash roms now. again thank you.saved me alot of cash
Click to expand...
Click to collapse
That's because Kies isn't supported in the US and you don't need it anyway! Glad to hear you're up and running again.
worked great thankyou.except ended up with the at&t version.thats ok.now i know how to flash a rom.thanks again
jamesrfraser said:
worked great thankyou.except ended up with the at&t version.thats ok.now i know how to flash a rom.thanks again
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=16098171&postcount=5
That's the link for the Canadian Stock Heimdall package.
Be careful when flashing ROMS, be certain to read the instructions carefully and read the thread too, usually you will find all the information you need, any problems to expect and how to recover from these problems. Good Luck and happy flashing!
Related
Hello all. If you are as tired of this ODIN method as i am, than you on the same boat. This sucks. But its all we have. So i have made a visual guide to odin. Attached below.Its a JPEG. Feel free to download it, rather than flip from pages to pages to find it. Thanks again. Any other requests please email me [email protected]
Here goes.
REMEMBER PEOPLE I AM IN NO WAY RESPONSIBLE IF YOU DECIDE TO BLOW UP THE DISCOVERY CHANNEL, WARS, FIGHTS, and in NO WAY responsible for bricking if
Trust me, i have been in this scene 2 years now, since the g1, and i can bet that this phone will continue to blow peoples minds with its capabilities. This ODIN, is pre-historic. But the best way. I know there are 45 other flashing programs, guides, but none of them helped me like i bet this will help you. If you need any more screenshots of the process shoot me an email, or gtalk. Thanks again guys/girs.
-Groid
YOU CANT FOLLOW 1-6? - GET OUT OF HERE
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I Can also do screens of all Lag-Fix applications, but only on request, cause once you get this, and clockwork. You should have the phone mastered.
added to the bible
Thanks for the thread. almyz125 has added it to the 'Vibrant directory' which is already a sticky.
Glad i could help guys. Anything else, let me know.
thanks!
Thanks Groid!
I have not used Odin yet as I am new to Android, but I am positive I will at some point.
One thing that would really help this guide would be all the necessary files that you reference. I know they can be found via a search.... but it can be pretty nerv-racking when trying what you need when your device is dying.
Just a suggestion.
Thanks/ Andrew/
You might wanna also add that you need to remove both your sim card and memory card in order for Odin to flash your phone.
Sent from my SGH-T959 using XDA App
rei165 said:
You might wanna also add that you need to remove both your sim card and memory card in order for Odin to flash your phone.
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Why would you need to remove anything, I've used ODIN about seven times and the only thing I had to do was have the phone in download mode...
vamopyros_wrath said:
Why would you need to remove anything, I've used ODIN about seven times and the only thing I had to do was have the phone in download mode...
Click to expand...
Click to collapse
+1 It is not necessary to have odin flash your kernel.
maybe mixed results? for me, i cant flash back to stock nor can i flash the kernal without removing both sim and memory card. if i have the sim and memory card inserted it gets stuck at the "zimage" part.
I've had it stick there before too, but I usually just close odin, unplug my phone, open odin again, and plug my phone in again. usually after that it works
rei165 said:
You might wanna also add that you need to remove both your sim card and memory card in order for Odin to flash your phone.
Click to expand...
Click to collapse
They say so, i do, but once did with them in, and i was okay. But better to be safe than sorry.
And i will be posting the links to the various files, or the page that has the linkage, it is in the Bible along with this guide. Anything else let me know.
Sent from my iPhone6 with a$$-wiping capabilities, oh and FaceTime.
Its a joke people..
Thanks for this. While I felt like I had the steps in my head right for flashing ODIN...It was super helpful to have a pic reference.
does anyone know what the differences are between the 512 pit file and the 803 pit file floating around? Im assuming there different partition size layouts but whats the deal? I guess people have flashed the 803 pit file and it works the same as the 512 but what really changes i have yet to find??
please delete. answer found.
You justg saved my butter! My Bionix butter that is. Thanks guys, you guys are the best
the difference i do know is that the 803 pit file changes your entire system, and the way it runs. It sets it up differently, thats why you need it for generally most Froyo's or deviations of the i9000 2.2 (803.pit).
So other than a number, and a file system change .. not a thing
This was working just fine until I installed Master Rom 1.1 Now I can't use Odin. It'll load like it always did, I go to download mode and get everything set right on Odin and it Go and then it hangs. I've tried this process now 20 times to no avail. Any ideas what's hanging it up?
Use odin 1.3 not 1
Sent from my SGH-T959 using XDA App
hydrogenman said:
Use odin 1.3 not 1
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
Tried that,unfortunately didn't work.
where is the downlaod visual guide?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OK I bought an used Captivate is firmware is 2.3.3
baseband i897uckf1
Kernel 2.6.35.7-i897uckf1-cl273832
build.number gingerbread. Uckf1
My problem is that I think it's rooted but no superuser.apk. so I downloaded it from the market, but it tells me that the binary is outdated. I tried to update the binary but su force closed. I tried super one click method, also many other ways to root but when I got into recovery there's no options for reinstall package . Also it doesn't have the 3 button combo to boot into recovery. So I want to go back to stock and go from there and see if I can root and start using custom roms. What can I do? Wolf's toolbox already soft bricked my brothers captivate so any options so I don't go blind here.?
Sent from my Inspire 4G using XDA Premium App
I would use odin to put the phone on a stock firmware. I've done this on an epic 4G, a sister to the captivate . I'm sure there's a guide to use odin and stock firmware somewhere on the forum. After its stock reroot and blah blah etc. That way you know everything is done right if you did it yourself.
Sent from my Nexus S 4G using Tapatalk
ok but do i need any boot loaders? because i read that going from gingerbread to stock you need bootloaders.
also theres 3 stocks f6, h2, h3 so which one is the safest one to flash? i really dont want to brick the phone
You already have gingerbread bootloaders so you don't need to touch them (its safer to not mess with bootloaders). If your looking for gingerbread stock its KH3 use this one with no bootloaders http://forum.xda-developers.com/showthread.php?t=1269524
Silence will Fall
Captain_Nero said:
You already have gingerbread bootloaders so you don't need to touch them (its safer to not mess with bootloaders). If your looking for gingerbread stock its KH3 use the one with no bootloaders if you want froyo then its KB2.
Silence will Fall
Click to expand...
Click to collapse
OK thanx for that now with my problem rooting the phone. Theres no option for reinstall packages and when i try to update the binaries it FC, What can I doo to root and flash Roms? Thanx again
If your going to Flash a ROM on it there is no need to Root.
Silence will Fall
Im kinda confused..... in order to flash the rom I need rom manager and ton use rom manager I need root permissions so, any other way?????
Man thanx alot, I flash H3 and my recovery changed, I'm such a dumbass, well trial and error as they say, right. Many many thnx.
If you follow the link captain Nero gave you it is to an Odin packaged GB ROM. You don't use room manager for this, you flash you're phone using Odin from a widows computer.
Also you don't need root to flash with Odin.
Sent from my SAMSUNG-SGH-I897 using XDA App
lordpipa said:
Im kinda confused..... in order to flash the rom I need rom manager and ton use rom manager I need root permissions so, any other way?????
Man thanx alot, I flash H3 and my recovery changed, I'm such a dumbass, well trial and error as they say, right. Many many thnx.
Click to expand...
Click to collapse
Yes that particular one comes with cwm cooked in.
Sent from my SAMSUNG-SGH-I897 using XDA App
dayv said:
If you follow the link captain Nero gave you it is to an Odin packaged GB ROM. You don't use room manager for this, you flash you're phone using Odin from a widows computer.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
Yes my bad, I meant custom roms, because when I booted into recovery before flashing the GB Rom from the link, all I got was the original recovery as I posted on the photo. But now thanx to you guys everything is up and running. Again many thanx
Just use a kernel with CWM cooked with it. You can use Boog's KH3 cwm kernel or Design Gear's KF1 cwm Kernel (step 2)
Hi, Some weeks ago i tryed to flash a room on, but all i got was a bootloop of some kind. Then i tryed to flash Firmware and it got stuck at the process, so i waited for the tab to run out of battery, next thing you know, it didnt show any signs of life, i tryed filling it for 4 hours and more but it didnt work.
Any ideas how to ressurect it? I tryed to google it alot of times but everything lead up to here...
0:[COM3]
i get this so it recognizes the device?
what should i do now? im realy not good in english and understanding all of those phrazes...I would realy apreciate some help.
pitastrudl said:
0:[COM3]
i get this so it recognizes the device?
what should i do now? im realy not good in english and understanding all of those phrazes...I would realy apreciate some help.
Click to expand...
Click to collapse
Follow the guide here to flash the stock rom : http://www.teamovercome.net/p1000/?page_id=17
its wierd, duddenly odin doesnt recognize the tab??? i didnt change anything...
Sent from my desire hd using miui
pitastrudl said:
its wierd, duddenly odin doesnt recognize the tab??? i didnt change anything...
Sent from my desire hd using miui
Click to expand...
Click to collapse
Try reinstalling the drivers...
So, after a long time i came across it again, sorry for waking the thread from the dead, but its better than just to create a new one. So im fairly new to flashing samsung firmware, so to speak i have no idea how it goes. I have a htc and its fairly simple. So now i connected it and widnows installed the drivers and i did kies.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
So i ran odin and it detected it! So is there a slim chance to save it?
Yes. If it is detected in download mode.
Follow my signature to sos_sifou's thread for overcome files.
Download the pdf guide and GB-stock-safe-v5 and jump to guide page 7.
Follow as in the picture on that page.
Sent from my GT-I9300 using xda app-developers app
The tab does not respont to anything,it wont turn on by any means , but windows and odin detected it. I've seen that you can unbrick it from soft brick but i cant get to download mode
Try OneClickUnbrick,
search for it.
Sent from my GT-P1000 using xda app-developers app
Tried it, didnt work, when i clicked it it jsut sent me to the help centre, where i had to install three things, framework.net for windows which i have,heimdall i had, and the other thing it installed, so i rebooted the computer and it still did not detect it. It states in the thread that the oneclickunbrick is for soft bricks. And i cant even reach the boot logo nor download mode.
pitastrudl said:
Hi, Some weeks ago i tryed to flash a room on, but all i got was a bootloop of some kind. Then i tryed to flash Firmware and it got stuck at the process, so i waited for the tab to run out of battery, next thing you know, it didnt show any signs of life, i tryed filling it for 4 hours and more but it didnt work.
Any ideas how to ressurect it? I tryed to google it alot of times but everything lead up to here...
Click to expand...
Click to collapse
You have to give it to repair , no other solution for coma brick
Hello guys,
This phone is giving me headaches. Once I rooted the phone is not allowing me to to flash CWM and nothing at all but continue stock. Im looking like a paranoid for the Pit file and the flash rom for me to go stock 100% but there is nothing in the forum to well organized I guess that I have missed looking for it or getting lucky to find it.
Im on 2.3.3 right now and the more I do factory reset the more the superuser stays installed. Pleas advise how to successfully flash my phone from scratch for me to install one of the custom ported roms we have in the forum.
I came from Samsung Vibrant with an experience of more then 1000 flashes. I think the bad thing about this phone is that we have to navigate over 7 different forums to get the info correctly and is very confusing.
Guys I also dont have Network Signal meaning I cant use the phone.
Thanks guys very much for any help
SVLAN said:
Hello guys,
This phone is giving me headaches. Once I rooted the phone is not allowing me to to flash CWM and nothing at all but continue stock. Im looking like a paranoid for the Pit file and the flash rom for me to go stock 100% but there is nothing in the forum to well organized I guess that I have missed looking for it or getting lucky to find it.
Im on 2.3.3 right now and the more I do factory reset the more the superuser stays installed. Pleas advise how to successfully flash my phone from scratch for me to install one of the custom ported roms we have in the forum.
I came from Samsung Vibrant with an experience of more then 1000 flashes. I think the bad thing about this phone is that we have to navigate over 7 different forums to get the info correctly and is very confusing.
Guys I also dont have Network Signal meaning I cant use the phone.
Thanks guys very much for any help
Click to expand...
Click to collapse
I think you are in the wrong forum this is for the galaxy exhibit 4g aka the exhibit 2. I say this because I think the stock ROM that the exhibit 2 came with was 2.3.5
Sent from my Nexus 7 using xda app-developers app
well the Firmware version of this phone is 2.3.3
with a kernel version 2.6.35.7-T759UVKE8-CL205219
BUILD NUMBER is GINGERBREAD.UVKE8
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The phone I have is that one above
thanks
SVLAN said:
The phone I have is that one above
thanks
Click to expand...
Click to collapse
Sorry man, wrong phone, try googling xda stock t759. Yours is t759 ours is t679. Best of luck
Sent from my Nexus 7 using xda app-developers app
OMG this phone is getting me so frustrate it very soon it will meet my wall.
Do we have a forum for this phone here at XDA?
thanks
SVLAN said:
OMG this phone is getting me so frustrate it very soon it will meet my wall.
Do we have a forum for this phone here at XDA?
thanks
Click to expand...
Click to collapse
No forums, but there are threads. Just Google xda t759 stock and read around. I know that a stock Odin flash able package is available, but I don't remember where. Also post in their forums because although our phones are very similar I don't know the exact steps/files for your phone.
Sent from my Nexus 7 using xda app-developers app
Sorry wrong no forms at all t759 they all were removed!
Sent from my SGH-T759 using xda premium
Stuck at Samsung Boot image. PLZZZ help. Will "DONATE" to whom ever that can help
Hi guys,
Please help me fix my Note 5!!!
Quick background story:
Bought it on ebay "As Is". Guy said it got stuck while using Samsungs smart switch software. Phone still has intact Knox ("0") so warranty is intact.
But I dont want to take the warranty exchange route yet. It is on 6.0.1 PD2 or PH2 (i forget, I am at work at the momemnt) because thats what smart switch says
that it is going to restore.
Things I have done: (Used multiple cables, using Win10)
- Tried Emergency restore via Smart Switch. -- No success. It says something like cant restore.
- Used Odin 3.7 & 3.12.6 to flash stock PD2 or PH2 firmware. Odin flashes the rom now (it wasnt earlier) and when the phone reboots it stays at "Samsung Logo" and
doesnt move on.
- Cant get to recovery. It just does nothing when holding the buttons.
- I can only get to Download screen.
So, I dont know what to do now. I was able to get my previous note 5 working by using odin but this one is just stuck.
I would really appreciate all the help.
Thanks.
EDIT:
Forgot to mention that FRP is Locked
Hope this will help .. no donation needed
http://forum.xda-developers.com/showthread.php?t=3293306
Sent from my SM-N920C using XDA-Developers mobile app
firefox50 said:
Hope this will help .. no donation needed
http://forum.xda-developers.com/showthread.php?t=3293306
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
Hi,
Thanks for the quick response. I forgot to mention that FRP is locked unfortunately. Will that be an issue? I have spent literraly 6-7 hours searching XDA and downloading stuff yesterday with no success.
Thanks.
firefox50 said:
Hope this will help .. no donation needed
http://forum.xda-developers.com/showthread.php?t=3293306
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
@firefox50
Hi,
So I tried going to the link and unfortunately it did not work . The software to repack the (boot.img, recovery.img, system.img) does not work for some reason. Tried using 7zip, but I cant find a way to combine the 3 img files into .tar files. What am I missing here?
Spent another 3 hours after work today fiddling with this . The wife is def not happy.
Any other suggestions?
Plzzz help a guy out.
You can try to install TWRP recovery by odin. Boot into download mode then connect your phone to the computer. Once done you will need to download some files which will install the recovery by odin. Next hold the volume up, power, and home button until twrp recovery comes up then connect the storage to your pc and install a custom rom and hopefully this might fix it. This will void warranty so do this at your own risk.
How to root: https://youtu.be/epLA2EjGXTg
Custom Rom: http://www.drketanrom.com/note5-n920i.html
bighit101 said:
@firefox50
Hi,
So I tried going to the link and unfortunately it did not work . The software to repack the (boot.img, recovery.img, system.img) does not work for some reason. Tried using 7zip, but I cant find a way to combine the 3 img files into .tar files. What am I missing here?
Spent another 3 hours after work today fiddling with this . The wife is def not happy.
Any other suggestions?
Plzzz help a guy out.
Click to expand...
Click to collapse
Hi .. and sorry for late reply.. plz follow the instructions as shown in attached picture.. dont use 7zip or whatever just use the tool provided in the original thread.. hope it works
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N920C using XDA-Developers mobile app
firefox50 said:
Hi .. and sorry for late reply.. plz follow the instructions as shown in attached picture.. dont use 7zip or whatever just use the tool provided in the original thread.. hope it works
Sent from my SM-N920C using XDA-Developers mobile app
Click to expand...
Click to collapse
@firefox50
Thanks again for replying back. Really appreciate you trying to help me. I am at work so will try it again tonight. But the tool gives an error everytime. I am using win10. Could that be an issue?