Something strange happened to my SGS about 3 times over the last few months.
1 – When I tried to use the SGS after a few hours lying on the table, the screen was blank even after pressing the Home button or power button. I tried calling the mobile from another phone it was not out of service but I heard no ringtone playing from the SGS. After a hour or two it just came back into full display.
2 – Couple of weeks earlier, I was charging the SGS and when I checked back the screen was blank. I tried pressing many buttons but it never came back in to full display. I removed the battery and put it back on and it started.
3 – Just yesterday the screen was blank when I checked in the morning. I pressed the power button for more than 4 seconds and did that again and then the phone powered on.
Has this kind of issue happened to any of you with the SGS?
http://www.youtube.com/watch?v=9waFvFlywAs&lc
Thanks
Mike
Are you on any custom firmware at all?? I suggest....if you are, reflashing back to stock, then rooting again, then flashing custom firmware again, but before you flash custom, go to mounts and storage, format system, data, cache and datadata, then wipe dalvik cache too. Can you confirm whether you can enter download mode?? Cheers bud
Sent from my CM7 modded I9000. Kernel is one mean son of a Glitch!
I am not on a custom firmware. It is using standard Android 2.3.3 for Samsung Galaxy S. Yes I can do the three button recovery mode
1. Power Off
2. Press and hold Volume Up + Home Key
3. Continue holding those buttons and then press and hold power.
4. When you see the logo pop up release power ONLY
5. Keep holding two buttons from step 2 until you enter recovery mode.
I got the same problem.. It goes into the BSOD during a call or just after handup. I am on Darky's 10.2RE
Related
Hi
I have just tried to update to 2.2, i updated Kies first, connected my phone, it came back saying update available, fully charged battery, all seemed to go ok, phone rebooted, but when coming back up I get the logo, and the start up music, then it vibrates a bit the keys on bottom left and right are lit up, screen black and doesn't seem to do anything.
I have removed battery, have tried 3 button restore (no effect) it just keeps vibrating every min or so.
holding the power button restarts it, thats about all i can get it to do.
Have I ruined the phone?? please help.
boycey66 said:
Hi
I have just tried to update to 2.2, i updated Kies first, connected my phone, it came back saying update available, fully charged battery, all seemed to go ok, phone rebooted, but when coming back up I get the logo, and the start up music, then it vibrates a bit the keys on bottom left and right are lit up, screen black and doesn't seem to do anything.
I have removed battery, have tried 3 button restore (no effect) it just keeps vibrating every min or so.
holding the power button restarts it, thats about all i can get it to do.
Have I ruined the phone?? please help.
Click to expand...
Click to collapse
First question... Did you have a lagfix on the phone before you tried to update it?
Second question... If you answered yes to question one... Did you remove / disable the lagfix before you flashed through Kies?
i had lag fix and was rooted, i plugged it in to laptop and it was recognised and said update 2.2 available, so i thought that was ok.
Now it is as i describe as above, i get battery logo if i plug into laptop, bottom left and right keys are lit but don't do anything, screen is black and vibrates every couple of minutes, if i hold power button get the GT galaxy s screen then the music, then the S galaxys screen which goes black with the two keys lit, if i press power button again it goes off and to the battery logo again.
Cannot get odin or kies to recognise phone plugged in, or get it into recovery or download mode
boycey66 said:
i had lag fix and was rooted, i plugged it in to laptop and it was recognised and said update 2.2 available, so i thought that was ok.
Now it is as i describe as above, i get battery logo if i plug into laptop, bottom left and right keys are lit but don't do anything, screen is black and vibrates every couple of minutes, if i hold power button get the GT galaxy s screen then the music, then the S galaxys screen which goes black with the two keys lit, if i press power button again it goes off and to the battery logo again.
Cannot get odin or kies to recognise phone plugged in, or get it into recovery or download mode
Click to expand...
Click to collapse
you didn't answer the question but I will assume that you were using a lagfix but did not disable it before you tried to update you phone.
try removing the battery for a few minutes and try going to download mode (hold vol down + home + power)
Go into recovery mode (vol up + home + power 'till screen switches on) and select the delete data/cache (?) option with the volume keys, using the middle button to confirm. Your phone will work, but unfortunately, you'll loose all your app/settings =/
Should have un-lagfixed before updating :-s
let us know if Rawat's way worked for you.
I had disabled my lagfix too when updating to doc jk3 using cwm and same thing happened to me.
Only way i fixed it was to flash my phone's stock rom, jh2 2.1 using odin3 v1.3 and the firmware from samfirmware. (pda only, no pit, no repartition)
then i upgraded to froyo again and it worked.
I just attempted to root my Galaxy Note using the instructions found on the development forum and I thought everything went well. Now, however, once the phone starts it wont turn on again - if I press the power button the screen back light comes on but thats it. I have to remove the battery to restart it, but then the same thing happens again. Any idea how to fix this?
Will it go into download mode if so flash a stock rom with odin
Sent from my GT-N7000 using XDA Premium HD app
LightinDarkness said:
I just attempted to root my Galaxy Note using the instructions found on the development forum and I thought everything went well. Now, however, once the phone starts it wont turn on again - if I press the power button the screen back light comes on but thats it. I have to remove the battery to restart it, but then the same thing happens again. Any idea how to fix this?
Click to expand...
Click to collapse
Power off your phone - take out your battery if necessary and wait about a minute, then put it back in.
Press volume up + home + power and hold, see if you can get into Recovery.
If you can, wipe cache, dalvik and do a factory reset.
Try to reboot.
chasmodo said:
Power off your phone - take out your battery if necessary and wait about a minute, then put it back in.
Press volume up + home + power and hold, see if you can get into Recovery.
If you can, wipe cache, dalvik and do a factory reset.
Try to reboot.
Click to expand...
Click to collapse
I did all that and everything went through, same problem though after reboot - once the screen turns off, hitting the power button only makes the back light go on and the screen itself doesnt seem to turn on. The phone seems to function "as normal" - it even reboots fine - until I have to turn the screen on using the power button after initially booting it up.
LightinDarkness said:
I did all that and everything went through, same problem though after reboot - once the screen turns off, hitting the power button only makes the back light go on and the screen itself doesnt seem to turn on. The phone seems to function "as normal" - it even reboots fine - until I have to turn the screen on using the power button after initially booting it up.
Click to expand...
Click to collapse
If that's still the case, I'd try to boot into download mode and flash a stock rom (as was suggested above).
I had just installed the latest ics fw on my note previously running gingerbread and never had a problem. After i downloaded the 316mb update( approx size, don't remember the actual size) and installed it the phone was on the packet installation screen with a bar on the bottom. The bar filled up in half an hour and i kept waiting for another hour but nothing happened. After that i shut down my phone and restarted it again. It showed up the galaxy note n-7000 screen and then the android bot with diamond on the screen for a couple of seconds and then the screen turned black. Then i took out the battery and tried to restart the phone again but to no avail. All it shows is the galaxy note screen and then a black screen. I have never modded my phone and it was absolutely stock. What is wrong with this phone, and any chance i could fix it up myself rather than going to the service center because i am out of city for a month and need my phone for work real bad. Thanks in advance for any help provided.
PS : Tried the home button + volume down button and power button trick that does bring me to a caution screen of installing custom OS.
PSS : And now when i start up the phone with charger plugged in it just keep displaying the battery on the screen.
hitanshubhalla said:
I had just installed the latest ics fw on my note previously running gingerbread and never had a problem. After i downloaded the 316mb update( approx size, don't remember the actual size) and installed it the phone was on the packet installation screen with a bar on the bottom. The bar filled up in half an hour and i kept waiting for another hour but nothing happened. After that i shut down my phone and restarted it again. It showed up the galaxy note n-7000 screen and then the android bot with diamond on the screen for a couple of seconds and then the screen turned black. Then i took out the battery and tried to restart the phone again but to no avail. All it shows is the galaxy note screen and then a black screen. I have never modded my phone and it was absolutely stock. What is wrong with this phone, and any chance i could fix it up myself rather than going to the service center because i am out of city for a month and need my phone for work real bad. Thanks in advance for any help provided.
PS : Tried the home button + volume down button and power button trick that does bring me to a caution screen of installing custom OS.
PSS : And now when i start up the phone with charger plugged in it just keep displaying the battery on the screen.
Click to expand...
Click to collapse
how u are using three button technique. first press volume up then home button and then power button all one by one as mentioned in the same order then just hold three till u reach boot menu.
^
Tried it again thrice again exactly in the same order you asked to but same thing happens. The galaxy note n-7000 screen flashes twice and then the android bot with blue ball/diamond for couple of seconds and the screen goes blank.
Though i can access the download menu by pressing volume down + home button + power button
try instal new rom using odin and download menu.....have u tried the same by removing battery also.
What Rom where you on before this problem happened? Were you rooted?
Best to follow this to the letter
Go into download mode.
Pc odin stock rom from www.sammobile.com for your countries phone with pit file for your phone.
Exact way is in dr Ketans thread in sticky section of development.
Do not do factory reset or wipe data on ICS period
Sent from my GT-N7000 using Tapatalk 2
Hi to all the xda members this is my first post here :laugh:
About a month ago i decided to fix the screen (black screen no image) of my S3 mini, so i buught a replacement on ebay. after a few days and some youtube videos i change the screen and the protector glass and the phone was working again then i take the phone and install it the CWM recovery because a read that is a good tool to have on a android phone, after a few days of use (no hits no water no fallen) the color of the phone was incredibly oversaturated and too much bright but to be honest i keep using it like that. few more days later the screen suddenly turn green.
The phone boots normal you can hear the noise and even answer a call if you know where to touch So i think in trying to wipe the cache using the CWM (entering using the volume up + home + power method) calculating how many times to touch the volume down button and the power button to get it done, btw it's 3 time volume down 1 power button 7 more times volume down and 1 another power button. But when i touch the first time the power button the phone just boot up normally so i put more attention and when it turn on using without releasing the 3 button the phone makes a little vibration but after a few seconds there is no second vibration.
In this point and just out of ideas, i don't have warranty for the phone here in my country, so i think the big question here is should i buy a new screen or is another kind of problem???
P.S: sorry for the long post and my bad english
no ideas with the problem???
i little update with my problem:
after reading a lot looking for a solution (or at least understand the problem) i try to install a custom rom using odin but still nothing change, after that i use the aokp rom from maclaw page and still nothing, so i say to myself you should try using the kies, so i give it a chance to the kies but it fails so i went back to install a stock rom using odin and after the reboot the phone screen shows a boot logo (a X with the sames color that the windows) so there it was the screen working like it should. after like 15 min the logo was still there so i remove the battery and try to enter to the recovery to make a wipe, after pressing the 3 combinations button shows up the first logo in white letters but after that the same screen problem from the begining showing just artifacts.
after all that i try to flash everything back to stock and make a repartition (using a pit file that i found here on xda) but this time using heimdall instead of odin and still no change.
at this point i am out of ideas, i would listen to any recomendation no matter how crazy it sound just want my phone back to work
it is possible to make a "nand erase all" to the phone using odin and after make a repartition flash stock files using heimdall???
will the phone be able to boot into download mode after a nand erase???
htt p://imageshack.com/a/img4/3673/rsbh.jpg
that is a picture of the screen
I have an xperia z with unlocked bootloader and recently flashed a customised 5.1.1 rom, observing that the phone was overheating abnormally (60°c with only a few apps running) I thought a wipe and reset would help me, so got into recovery (twrp) wiped data and cache without touching internal.
Once done I dint see it telling me that SuperSU is missing and accidentally skipped it (I already have root) . The phone started rebooting and went blank. I think the only option is to flash stock again but I wanted a clarification on the use of buttons..
Vol+ + power restarts it again to the blank screen.
Vol- + power or vol+ + power to start the phone again lands me to blank screen after logo
Now to turn it off again Im holding all the three buttons, it vibrates once and reboots if I leave , if I still hold it after one vibration, it now vibrates three times and turns off.
Can anyone explain what exactly are these vibes in the last point , is it kind of a reset , can it help me any way in the future? (I'm still a noob, I just follow the instructions and have used a lots of roms on lots of phones)
I'm soooo sorry for making it a long story, its my first question..
Welcome
Because XZ doesn't have removable battery buttons combination is kinda way of pulling battery out. You only hold power button and volume up together, first vibration is rebooting device, and if you hold little more until you feel 3 vibrations it's power off, as you find out your self.
All the Best.
Sent from my D2303 using Tapatalk
Oh thank you
So I don't have to be further trying to mess with the buttons and just flash a fresh rom. Thanks