Hi, so I installed voodoo lagfix but its slower then the one I was previously using so I'd like to go back to that one.
The one thing is that to get rid of it you have to flash the stock kernel.
Could someone provide me with the kernel for I9000UGJH2?
Thanks alot.
get it here
http://samfirmware.webs.com/samsungandroid.htm
need Odin and 512 pit
Do I have to reparatition? Will my info be wiped or just reset to the other file system?
Sent from Samsung Galaxy S on Telus
Sent from my GT-I9000M using XDA App
it will be best to repartition as most of the lag fixes changes your partitions
Thanks for the help, I'm gonna wait out froyo, there isn't any notable difference in the two lag fixes just quadrant score.
Sent from my GT-I9000M using XDA App
Hi guys,
Just yesterday i loaded Coldmod Rom... am loving the rom but it lags sometimes... i was wondering if there are any kernels recommended for Coldmod rom that will keep the battery life the same (or make it better) and help get rid of the lag that i get sometimes....
Quadrant score is coming to only 930-980.. im on the same kernel that flashed with the Coldmod 2.0 (default)
Thanks
Sent from my GT-I9000 using XDA App
Quandrant sucs , my phone is very fast more faster than JPY(1600~) score and with ColdMod 1200~ so dont trust those . i am using Fugu kernerls , about my battery 2 days ( playing games , music internet)
i think its good, so just try it
Yeah i was just reading up on that.... thanx bro
Sent from my GT-I9000 using XDA App
I tried flashing the fugu ultra kernel... now my phone wont detect the sim card
What settings should i use when usinf fuguapp?
Also i want to know how i can revert it back to the settings that are by default when i flash coldmold rom...
Sent from my GT-I9000 using XDA App
Another problem im getting is that the language reverts to espagnol instead of english after every reboot.
This happens only after i use fugu apps... how can solve this issue?
Sent from my GT-I9000 using XDA App
Hello all,
I have following problem: I installed Juwe's ROM, wiped cache and davlik cache as install guide said so.
ROM is very smooth and fast but it says my SIM is not inserted. But it is..
I need FAST replies !
Thanks a lot.. Hope someone could help me.
Take out sim, clean and try reinserting
Sent from my GT-I9000 using xda premium
Already did, no effect. Now I'm on stock JVR with Speedmod kernel, Juwe waiting for flashing >.<
Sent from my GT-I9000 using XDA App
if that happens next time,just install modem in the recovery by install zip from sd.
Here's the JVR one:
http://db.tt/7ZF7fbv
Should do the trick.
Thanks. I'll try & let you know does it work or not.
Sent from my GT-I9000 using XDA App
Hello I am running 2.3.6 stock FW with cf root kernal and a few mods (crt off, music/video player still works on low battery, cache scrolling off) so I need to install lagfix? Is wad my understanding that there was no need for it since 2.3 but I'm not sure any help would be appreciated
Sent from my GT-I9000 using xda premium
I dont think you will need it any more
If you want it speed up u can, but Lagfix (ext4) I heard it consume battery more than rfs.
Do you know how much by?
Sent from my GT-I9000 using xda premium
Ext4 is way better than RFS(FAT16 with some tweaks). I don't use gb anymore, but i suggest u to ask in the kernel's thread. Maybe the kernel already has enabled the ext4 partition by himself
Good luck
I'm running CM10 nightly, and wondering if I will gain any performance improvement (without OC) and longer battery life if I flash one of the alternative kernels on XDA (looking at Devil and Semaphore as those seem to be the most popular)?
yes and yes, but it all depends on how you configure the kernel options and how you use your SGS...
Sent from my GT-I9000 using xda app-developers app
yes, definitely!
but to get the "best" result, of course you have to let it settle for atleast 3 days..
here is a youtube link on how to flash them: http://www.youtube.com/watch?v=kCBN-_zu5cY
i hope this helps,
cheers
Thanks for the answers. I was hoping for recommendations, do you have any?
Semaphore is looking good to me. Opinions?
I'd go with semaphore for ICS...
But for CM10 I'd use Devil..
But that's just me
Sent from my GT-I9000 using Tapatalk 2
If you want stability then semaphore.But if you want more tricks to make your phone even faster it is devil of course. There is one more kernel to try Mackay.
Test each to get the right one for you.
Sent from my GT-I9000 using xda premium
Semaphore is the one you need .
What else from having great speed with stability. Yeah, maybe Devil could provide some more speed, which is unnoticeable, for me at least.( except the benchmark tests )
Sema is the most stable one.
But devil isn't bad too.
Try them. But give your phone about 5 minutes after flashing and don't be frustrated when it's a bit laggy after first reboot.
Last days I tryed makay. --> I prefer sema
Sent from my GT-I9000 using xda app-developers app
I prefer devil. My phone still lasts a whole day (7am - 12pm) and is much faster. I like all the options.
Sent from my GT-I9000 using xda premium
On JB roms i always use the devil kernel even if the Semaphore is a very good kernel, Devil kernel allows me to entirely use my phone's habilities with no more battery drain than Sema
you will instantly notice more speed and smoothness with flashing semaphoer kernel.
+ more speed if you set up liveOC to 114%
Does anyone have any links? I'm using CM10 nightly and need a kernel so that BLM and Voodoo sound will work. I tried the latest semaphore 2.8.0 via Odin but the phone would not boot.
frazefast said:
Does anyone have any links? I'm using CM10 nightly and need a kernel so that BLM and Voodoo sound will work. I tried the latest semaphore 2.8.0 via Odin but the phone would not boot.
Click to expand...
Click to collapse
You should read the description more carefully. The 2.8 kernel is for JB 4.2 not CM10. Flash the 2.6.5 kernel.
Sent from my GT-I9000 using xda premium
Devil cause you are able to set wifi mode: powersave, stronger
Sent from my GT-I9000 using xda premium
Hello;
If I whant to get the most from my phone what kernel should i use and please if you can put some download links for kernel that you are suggesting.
Model Number:GT-I9000
Android version:4.1.2
Baseband version:I9000XXJVT
Kernel Version:
3.0.31.gdabec1a
[email protected]#1
CyanogenMod Version:10.0.0-galaxysmtd STABLE
Build number:
cm_galaxysmtd-userdebug 4.1.2 JZO54K
eng..20121113.054130 test-keys
Thank you for your time and suggestions.
The one and only Semaphore. Newest version 2.6.5(s)
The (s) is for if you use 403MB RAM configuration.
www.semaphore.gr
Sent from my GT-I9000 using Tapatalk 2
I have few more questions...will i flash only kernel or i need to flash the rom together with kenrel...and can i use odin to flash kernel?Sorry for all thease questions im noob guy in this area
You don't have to flash a rom if you're happy with the one you're using. And you can download .zip's and flash in CWM if you like, but I've found that the only times I've ever got into a boot loop when flashing a kernel are by doing it this way. Not that it has happened often. But for that reason, i prefer to flash my kernels .tar in odin, I've never had a problem doing it that way, but whatever way you choose to do it take a nandroid first, just in case.
Sent from my GT-I9000 using Tapatalk 2
Kernel flashed via odin...everything works perfectly! Thank you
LeRadelle said:
Kernel flashed via odin...everything works perfectly! Thank you
Click to expand...
Click to collapse
Glad to hear it. No problem
Download semaphore manager app if you haven't already done so. Also, if you used the (s) version, you need to make sure and select the bigmem option in semaphore manager and reboot for settings to take effect. Then you have 403MB RAM.
Sent from my GT-I9000 using Tapatalk 2