So I was trying to follow the directions here: http://forum.xda-developers.com/showthread.php?t=1127249
But I did NOT have a KF1 Rom. Now I'm stuck in a fugu fish reboot loop. I have tried VOLup and Down + power, I have tried VOL Up+power, I even made a 301k resister jig, all to no avail.
Does anyone have any more suggestions on getting my phone up and running again?
Flash dgs kf1 kernel and your set
Sent from my SGH-I897 using XDA Premium App
The fugu is a kernel swap root method.
Sent from my SGH-I897 using XDA Premium App
Oh yeah use Odin to flash the kernel...or you can just flash a stock rom and star over
Sent from my SGH-I897 using XDA Premium App
Same problem here
I'm having the same issue. The problem is that there is an infinite loop during loading. Either:
1. the att screen to fugu fish, repeat.
2. the "initiating charging" to reboot.
adb wont recognize it and because plugging it in takes it into a new reboot, the hard button combo wont work.
I've tried all of the possible button combos.
Correct me if I'm wrong but the fugu is gonna do that I believe its just for rooting purposes. Pull battery enter download mode flash the correct kernel for your Tom with Odin. Good to go
Sent from my Desire HD using XDA Premium App
Thought that's what I said
Sent from my SGH-I897 using XDA Premium App
oxlong27 said:
Correct me if I'm wrong but the fugu is gonna do that I believe its just for rooting purposes. Pull battery enter download mode flash the correct kernel for your Tom with Odin. Good to go
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Yeah, you're right but I couldn't 3-button into download. I jig fixed and now I'm good and loaded cog5.
The only problem I have now (which I had before) is that I cannot boot into recovery mode. It just boots to the at&t screen and then gets brighter.
lax_addict said:
Yeah, you're right but I couldn't 3-button into download. I jig fixed and now I'm good and loaded cog5.
The only problem I have now (which I had before) is that I cannot boot into recovery mode. It just boots to the at&t screen and then gets brighter.
Click to expand...
Click to collapse
Load Cog kernal and you will have recovery back.
As popfan said, you need to flash the cognition 5 beta 2 kernel before you flash the final rom.
Sent from my SAMSUNG-SGH-I897 using XDA App
please people for the love of all that you hold dear. Stop flashing till you know WTH your doing. It is hard to be willing to help others when hundreds of people make the same mistake because they are not reading and and being LAZY by just following a video. I am hard pressed to feel sorry for bricks that come from lack of effort on the users part. With the coming changes you may want to be sure you understand what your doing before you do it.
Thread closed
Related
So I flashed the initial kernel file using ODIN3 to my captivate running Continuum __ and I'm getting stuck at the Galaxy S CyanogenMod screen. I was wondering if there is any way to fix this other than purchasing the resistors and making a jig...
Did you try flashing back to stock?
Sent from my SGH-I897 using XDA Premium App
Continuum is a Froyo ROM, right? Were you trying to pair a gingerbread kernel with a Froyo ROM?
Can you get into DL mode to odin back?
Sent from my SAMSUNG-SGH-I897 using XDA App
hmm flashing the WRONG kernel screwed you...
soo....
(insert logic here)
assistantstevie said:
So I flashed the initial kernel file using ODIN3 to my captivate running Continuum __ and I'm getting stuck at the Galaxy S CyanogenMod screen. I was wondering if there is any way to fix this other than purchasing the resistors and making a jig...
Click to expand...
Click to collapse
First off, what you described isnt even close to a brick.
You need to tell us a couple things. Can you get into download mode? have you tried to flash back to stock?
well the problem is that i cant get into download mode or boot into recovery
Anyway to "adb reboot download"?
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
nope cause i cant get the usb debugging to work since it wont boot at all
Been there once...what I did was...removed the battery ..and out my phone in Download mode...flashed back to Stock 2.1 and did everything again
You said you cant put it in DL mode? were your 3 button combo working when U flashed initial kernel?
Its definitely not bricked, try putting it into DL mode and flash to stock..
1. remove the usb cable, battery, sdcard, SIM.
2. wait 10 seconds, then insert the USB cable.
3. press and hold the 3 button combo while you insert the battery
4. continue to hold until phone's screen goes black twice and release power button.
5. timing is critical, it may not work the first time. Keep going until you see the COM port is connected properly.
well when i was flashing initial kernel i just did adb download and the flashed it and when i follow your steps it just puts me back to boot screen and i stay there
assistantstevie said:
well when i was flashing initial kernel i just did adb download and the flashed it and when i follow your steps it just puts me back to boot screen and i stay there
Click to expand...
Click to collapse
so did you read the instructions where it says to not use commands like "adb reboot download" or "adb reboot recovery"? and to make sure you had a working three button recovery before you attempted installation of the ROM?
oohh...i didnt check that, so is that what screwed it up? and if so how can i fix it?
Another one bites the dust...
Sent from my SAMSUNG-SGH-I897 using XDA Premium App
assistantstevie said:
well when i was flashing initial kernel i just did adb download and the flashed it and when i follow your steps it just puts me back to boot screen and i stay there
Click to expand...
Click to collapse
Looks like you dont have 3-button combo and U still tried to flash CM7 ....next time PLEASE read the instruction...I think only Jig can help you....there r many threads which teaches you to make jigs.
assistantstevie said:
oohh...i didnt check that, so is that what screwed it up? and if so how can i fix it?
Click to expand...
Click to collapse
now you're boned until you get a jig. which is why it's very important to read the FAQ/instructions.
k thanks for all the help
build a jig yourself or buy one online. it will get you into the download mode:
http://cgi.ebay.com/ws/eBayISAPI.dl...84198&ssPageName=STRK:MESELX:IT#ht_782wt_1139
So I had cognition 4.x.x but I realized the rom that I was reading about the other day was cog 5, I didn't see it in rom manager but I did see it in the dev page, I downloaded it and went to install it.after 10 minutes its still on att logo, and I've tried the 3 button move but I just get a screen flash from black back to att logo. Dang, my first brick.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
nash2000 said:
So I had cognition 4.x.x but I realized the rom that I was reading about the other day was cog 5, I didn't see it in rom manager but I did see it in the dev page, I downloaded it and went to install it.after 10 minutes its still on att logo, and I've tried the 3 button move but I just get a screen flash from black back to att logo. Dang, my first brick.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
Cognition 5 is a gingerbread rom, you need to follow the instructions on the first or second post to flash it. Can you get to download mode? If you can, try to odin back to stock and go from there...
Also, make sure you read the entire opening posts for installation instructions for every rom you flash.
Sent from my GT-I9000 using XDA Premium App
nash2000 said:
So I had cognition 4.x.x but I realized the rom that I was reading about the other day was cog 5, I didn't see it in rom manager but I did see it in the dev page, I downloaded it and went to install it.after 10 minutes its still on att logo, and I've tried the 3 button move but I just get a screen flash from black back to att logo. Dang, my first brick.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
Get in download mode and flash back to stock DO NOT use 3 botton fix. To get in to download more depending on bootleaders but if on I897 bootloaders take out battery sim and SD, plug in the phone press Vol up and down and insert cable (that's connected to the pc). If that doesn't work consider a Jig
prbassplayer said:
Get in download mode and flash back to stock DO NOT use 3 botton fix. To get in to download more depending on bootleaders but if on I897 bootloaders take out battery sim and SD, plug in the phone press Vol up and down and insert cable (that's connected to the pc). If that doesn't work consider a Jig
Click to expand...
Click to collapse
That sucks, I didn't even notice it was a gb rom and I always read the instructions besides this time. I pulled everything mentioned and I get no life when connected to pc while holding down volume up and down. Before I had any replies I did try the 3 buttons but all that brings me is to a little wheel on my screen. So I guess this is it huh?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
I just called att and they're sending me a replacement phone, I just played dumb, they tried a few troubleshooting techniques to no avail so they said they'd send me a reconditioned replacement at no cost and ill have it in 5 days or so. Good thing its by back up phone and line, next ill read and read again the proper requirements of said rom.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Dont they have a one click unbrick for captivate?
sharkboy0901 said:
Dont they have a one click unbrick for captivate?
Click to expand...
Click to collapse
I thought I read that there was but the instructions above don't mention anything about one so I'm guessing either there isn't one or it won't help in my case.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Enter download mode, one click ODIN, and you're set
varem said:
Enter download mode, one click ODIN, and you're set
Click to expand...
Click to collapse
It won't enter download mode, when I hold all 3 buttons all I get is a Continuing att logo flash. Although I did try it several time with different release timing and I was able to get to a black screen with 1of those little spinning wheels. But I was told not to use 3 button fix just use the volume keys, which did nothing at all.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
The three button fix is a zip file you flash from cwm that replaces one of your boot loaders, you didnt do this did you?try pulling your battery for a awhile have odin open on your pc,insert battery,hold both volume buttons, insert usb. Or try the one click unbrick
Sent from my GT-I9000 using XDA Premium App
First make sure you have the right drivers in your PC. They will be/act different since your on gingerbread bootloaders now. Try the Nexus s drivers or download ask and start all over, it will download the drivers needed. You can also read somewhere in the forums about other drivers/apps that can get you the right drivers for your pc.
Also you can use a jig to get you in download mode.
YOU ARE NOT HARD Bricked at this point SINCE you do get to the att screen. IF you flash the 3 button fix now you will be permenently bricked and the phone will ONLY go e a black screen
IF you send your phone back to att is the state it is in now they MAY see that you flashed something and will charge you the full price of the new phone. You MAY get lucky if att or samsung don't check it but personally I wouldn't risk it. Buy a jig from mobiletech videos for the $8 and make sure you have the correct drivers on your PC. Then you will be able to fix it. Just keep trying, switching USB ports, try a NEW USB cable, keep trying.
I also didn't see it mentioned or missed it but did you turn phone off,plug the USB cord into the PC but now into the phone yet, hold down the volume + volume- buttons, THEN plug in USB cable to phone. And it should put you into download mode.
Sent from My KickAss Captivated CM7 OC'd 1.5Ghz/Undervolted
Your making a big deal out of nothing If the key combo's don't work but the phone shows signs of any life Jig will fix it. You can make one with this or buy one in ebay or mobiletechvideos.com They cheap to buy even cheaper to make if you have patience.
Word of advice Always have a jig around. Its better to have one and not need it than being stuck without it. (also u can just ditch key combo's with it lol)
prbassplayer said:
Your making a big deal out of nothing If the key combo's don't work but the phone shows signs of any life Jig will fix it. You can make one with this or buy one in ebay or mobiletechvideos.com They cheap to buy even cheaper to make if you have patience.
Word of advice Always have a jig around. Its better to have one and not need it than being stuck without it. (also u can just ditch key combo's with it lol)
Click to expand...
Click to collapse
Well if bestbuy sells then than ill grab one tomorrow,
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
To enter download mode, remove battery. Open ODIN, press and hold both volume vbuttons, insert usb, insert battery, start ODIN, theb presto! Stock Eclair
Sent from my SAMSUNG-SGH-I897 using XDA App
varem said:
To enter download mode, remove battery. Open ODIN, press and hold both volume vbuttons, insert usb, insert battery, start ODIN, theb presto! Stock Eclair
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I've never used ODIN before, but I did install it on my pc yesterday since I heard it could possibly fix my phone. Do I need to install anything else or do I simply do what you mentioned?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
A found a few on ebay but could someone link me one from ebay so I don't buy the wrong one.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Ok, I entered odin and hit start but all I get is check image files. I haven't downloaded anything else and I've never used this before.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
was there a yellow box in odin before you hit start? if not it didnt detect it and you need the drivers for the phone. also make sure you are plugged into a usb port that is on the motherboard, on the back of the pc or port 1 on a laptop.
studacris said:
was there a yellow box in odin before you hit start? if not it didnt detect it and you need the drivers for the phone. also make sure you are plugged into a usb port that is on the motherboard, on the back of the pc or port 1 on a laptop.
Click to expand...
Click to collapse
OK, when I went to install the drivers my pc told me I already had them so I aborded. And I also just used one of the usb ports on the front. I should use one on the back?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
nash2000 said:
OK, when I went to install the drivers my pc told me I already had them so I aborded. And I also just used one of the usb ports on the front. I should use one on the back?
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
Click to expand...
Click to collapse
Its usually better that way.
ok so i tried to flash CM9 coming from gingerbread, i followed all the instructions and it all went well until it rebooted then it got stuck on the carrier logo ( att) and will not go any further. and way to recover? or is this a hard brick? oh and if it matters the kernal i was using was Corn
Try using the button combo to reboot into recovery and then reinstall ur Rom.
Sent from my SGH-I897 using xda premium
anonlos 8707
4-2ndtwin said:
Try using the button combo to reboot into recovery and then reinstall ur Rom.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
i did try that and it seems like its trying so i dont believe its one of the models that dont have that button combo also some things i forgot to mention is i was using clockwork recovery, and do have the original rom backed up on my external sd and also have back ups of verything titanium will back up if that helps narrow down a solution
rhvk37 said:
i did try that and it seems like its trying so i dont believe its one of the models that dont have that button combo also some things i forgot to mention is i was using clockwork recovery, and do have the original rom backed up on my external sd and also have back ups of verything titanium will back up if that helps narrow down a solution
Click to expand...
Click to collapse
Nope, not a brick. You probably have a working button combination, but the recovery simply isn't there. You need to boot into download mode and flash a kernel.
Sent from my SGH-I777 using xda premium
korockinout13 said:
Nope, not a brick. You probably have a working button combination, but the recovery simply isn't there. You need to boot into download mode and flash a kernel.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
well got it into download mode... only problem is computer wont recognize it
See if this thread helps.... Captivate PC Connection Issues, Download Mode and Recovery Mode Help
Sent from my SGH-I897 using xda premium
korockinout13 said:
Nope, not a brick. You probably have a working button combination, but the recovery simply isn't there. You need to boot into download mode and flash a kernel.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
thanks that fixed it. my phone is now awesome.
[Solved!]
Hey everyone!
I followed the Cyanogenmod guide from cm's website on how to install cm 10 on rooted att captivate from android 2.2 froyo.
I followed the guide exactly up to installing cwm recovery via heimdall on a windows 7 (heimdall wouldn't work on an xp I have so I switched to my 7) and everything worked as it said it would, however after finishing and getting the blue bar on the download mode screen, I held the vol up/down and pwr keys per the guide and the phone went to the att logo screen that it shows when you first turn it on and it just flashes that screen.
I can get into download mode still but it won't go into the options screen to hard reset or use cwm recovery.
I rooted it using the superoneclick method and I backedup with titanium.
I haven't been able to find anyone on xda or any other site with the same problem as me (everyone with a similar problem had a different version of android or something so I was afraid to try the solutions given for them.)
Please Help!! Thank you so much in advance!!
http://forum.xda-developers.com/showthread.php?t=731989
Follow this guide after putting your phone into download mode.
Sent from my SGH-I897 using Tapatalk 2
chdiryoung said:
Hey everyone!
I followed the Cyanogenmod guide from cm's website on how to install cm 10 on rooted att captivate from android 2.2 froyo.
I followed the guide exactly up to installing cwm recovery via heimdall on a windows 7 (heimdall wouldn't work on an xp I have so I switched to my 7) and everything worked as it said it would, however after finishing and getting the blue bar on the download mode screen, I held the vol up/down and pwr keys per the guide and the phone went to the att logo screen that it shows when you first turn it on and it just flashes that screen.
I can get into download mode still but it won't go into the options screen to hard reset or use cwm recovery.
I rooted it using the superoneclick method and I backedup with titanium.
I haven't been able to find anyone on xda or any other site with the same problem as me (everyone with a similar problem had a different version of android or something so I was afraid to try the solutions given for them.)
Please Help!! Thank you so much in advance!!
Click to expand...
Click to collapse
See this Captivate - PC Connection Issues, Download Mode and Recovery Mode Help thread on more info on how to get the phone to boot into Recovery...http://forum.xda-developers.com/showpost.php?p=33227541&postcount=1
Sent from my SAMSUNG-SGH-I747 using xda premium
Thanks, I tried getting into recovery mode using the guide on that thread but no luck. I haven't gotten to try the first guide suggested yet so when I have time I'll try that. Thankfully I can get into download mode fine.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Here is the last Stock Firmware released, i897ucKK4 Gingerbread 2.3.5, if ya wanna flash it instead.. http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 ...Since ya can get in Download mode.
Flashin to KK4 with the Bootloaders included (if u don't already have them) has solved the button combo problems for others who were not able to get into recovery, etc.
Heed all warnings about flashin bootloaders. It only takes a few seconds to flash the boot.bin and sbl.bin, but ya don't wanna interupt the flash durin that process, i.e. loose power, accidently disconnect micro usb/usb cable, etc.
Once ya have the gb boots, there is no need to flash bootloaders again.
Sent from my SAMSUNG-SGH-I747 using xda premium
Thanks so much, I'm gonna try that on Monday first chance I get!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
4-2ndtwin said:
Here is the last Stock Firmware released, i897ucKK4 Gingerbread 2.3.5, if ya wanna flash it instead.. http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 ...Since ya can get in Download mode.
Flashin to KK4 with the Bootloaders included (if u don't already have them) has solved the button combo problems for others who were not able to get into recovery, etc.
Heed all warnings about flashin bootloaders. It only takes a few seconds to flash the boot.bin and sbl.bin, but ya don't wanna interupt the flash durin that process, i.e. loose power, accidently disconnect micro usb/usb cable, etc.
Once ya have the gb boots, there is no need to flash bootloaders again.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
How long should/could it take Odin to detect/recognize my captivate? I couldn't wait to try the KK4 flash, but I've waited for about 10 minutes and it's not showing anything in Odin.:\
It should only take a few seconds.
See that Captivate - PC Connection Issues...thread i linked u to in my reply a few posts up.
Sent from my SAMSUNG-SGH-I747 using xda premium
Well I've been up all night lol but I got everything to work!! I guess it all just clicked with me and I understood and found all the answers in threads. THANK YOU SO MUCH!! Your link and Odin one click worked perfect. I think I had a problem with the drivers, that's why it wouldn't detect it. I read in another thread it could be that and I tried reinstalling the Samsung drivers but no luck. So I just switched to my windows xp where I'd never used heimdall drivers(I was on my windows 7) and did it on there, worked perfectly! I then went on to reinstall cwm and then cm 10.1.2 and I love it! Now I'm waiting for the Google play store .zip to download so I can flash it onto my i897! THANKS AGAIN!!! :thumbup:
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
yesterday i rooted and installed safestrap... tried a few different ROMs but the issue i had was running out of room for my apps.
i wiped the stock rom and rebooted... not it won't go past the Samsung Note3 Custom screen.
i tried to reboot into recovery, and install a ROM from the sd card, but it isn't working, i get a few errors and once it's done, it still won't get past the samsung screen.
Can i fix this? or is it bricked?
Sent from my Apple Galaxy Note 7
This should be in the Q&A thread.
Since you have rom slot I assume you are on JB. You still can access to the recovery so that's a good thing. The rom that you are trying to flash are also JB? How long is it stuck on Samsung splash screen? Worse comes worse you can always use the restore to mj5 to unbrick it. A bit more work but by all means this is fixable and nothing major.
Sent from my SAMSUNG-SM-N900A using Tapatalk
I also faced the same prblm..... just reboot using vol down+home button+power key.... then you will get into odin mode... install the stock 4.2.2 using odin and reboot
Sent from my GT-I9082 using XDA Premium 4 mobile app
jeevan000 said:
I also faced the same prblm..... just reboot using vol down+home button+power key.... then you will get into odin mode... install the stock 4.2.2 using odin and reboot
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
that's what I've found online... seems like that's the route I'll likely have to take.
I did backup my original OS/ROM but not sure how to load it. Looks like I'll be scouring google....
jeevan000 said:
I also faced the same prblm..... just reboot using vol down+home button+power key.... then you will get into odin mode... install the stock 4.2.2 using odin and reboot
Sent from my GT-I9082 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
where can i find the stock 4.3? or stock anything?
i found some instructions online but they are pretty long and convoluted
aceniza said:
where can i find the stock 4.3? or stock anything?
i found some instructions online but they are pretty long and convoluted
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2559715
wow, i honestly thought I bricked this thing. I had already seen the Restore for MJ5 threads, so when it got linked in this thread I was thinking to myself "you M.F.... " lol.
A lot of this stuff is way over my head (i'm a stubborn bastard).....
But it's back!!! Thanks XDA people!