Database Develop

[Q] Captivate stuck in Fugu Boot loop

So I was trying to follow the directions here: http://forum.xda-developers.com/showthread.php?t=1127249
But I did NOT have a KF1 Rom. Now I'm stuck in a fugu fish reboot loop. I have tried VOLup and Down + power, I have tried VOL Up+power, I even made a 301k resister jig, all to no avail.
Does anyone have any more suggestions on getting my phone up and running again?

Flash dgs kf1 kernel and your set
Sent from my SGH-I897 using XDA Premium App

The fugu is a kernel swap root method.
Sent from my SGH-I897 using XDA Premium App

Oh yeah use Odin to flash the kernel...or you can just flash a stock rom and star over
Sent from my SGH-I897 using XDA Premium App

Same problem here
I'm having the same issue. The problem is that there is an infinite loop during loading. Either:
1. the att screen to fugu fish, repeat.
2. the "initiating charging" to reboot.
adb wont recognize it and because plugging it in takes it into a new reboot, the hard button combo wont work.
I've tried all of the possible button combos.

Correct me if I'm wrong but the fugu is gonna do that I believe its just for rooting purposes. Pull battery enter download mode flash the correct kernel for your Tom with Odin. Good to go
Sent from my Desire HD using XDA Premium App

Thought that's what I said
Sent from my SGH-I897 using XDA Premium App

oxlong27 said:
Correct me if I'm wrong but the fugu is gonna do that I believe its just for rooting purposes. Pull battery enter download mode flash the correct kernel for your Tom with Odin. Good to go
Sent from my Desire HD using XDA Premium App
Click to expand...
Click to collapse
Yeah, you're right but I couldn't 3-button into download. I jig fixed and now I'm good and loaded cog5.
The only problem I have now (which I had before) is that I cannot boot into recovery mode. It just boots to the at&t screen and then gets brighter.

lax_addict said:
Yeah, you're right but I couldn't 3-button into download. I jig fixed and now I'm good and loaded cog5.
The only problem I have now (which I had before) is that I cannot boot into recovery mode. It just boots to the at&t screen and then gets brighter.
Click to expand...
Click to collapse
Load Cog kernal and you will have recovery back.

As popfan said, you need to flash the cognition 5 beta 2 kernel before you flash the final rom.
Sent from my SAMSUNG-SGH-I897 using XDA App

please people for the love of all that you hold dear. Stop flashing till you know WTH your doing. It is hard to be willing to help others when hundreds of people make the same mistake because they are not reading and and being LAZY by just following a video. I am hard pressed to feel sorry for bricks that come from lack of effort on the users part. With the coming changes you may want to be sure you understand what your doing before you do it.
Thread closed

[Q] phone stuck on carrier logo load screen

ok so i tried to flash CM9 coming from gingerbread, i followed all the instructions and it all went well until it rebooted then it got stuck on the carrier logo ( att) and will not go any further. and way to recover? or is this a hard brick? oh and if it matters the kernal i was using was Corn

Try using the button combo to reboot into recovery and then reinstall ur Rom.
Sent from my SGH-I897 using xda premium

anonlos 8707
4-2ndtwin said:
Try using the button combo to reboot into recovery and then reinstall ur Rom.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
i did try that and it seems like its trying so i dont believe its one of the models that dont have that button combo also some things i forgot to mention is i was using clockwork recovery, and do have the original rom backed up on my external sd and also have back ups of verything titanium will back up if that helps narrow down a solution

rhvk37 said:
i did try that and it seems like its trying so i dont believe its one of the models that dont have that button combo also some things i forgot to mention is i was using clockwork recovery, and do have the original rom backed up on my external sd and also have back ups of verything titanium will back up if that helps narrow down a solution
Click to expand...
Click to collapse
Nope, not a brick. You probably have a working button combination, but the recovery simply isn't there. You need to boot into download mode and flash a kernel.
Sent from my SGH-I777 using xda premium

korockinout13 said:
Nope, not a brick. You probably have a working button combination, but the recovery simply isn't there. You need to boot into download mode and flash a kernel.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
well got it into download mode... only problem is computer wont recognize it

See if this thread helps.... Captivate PC Connection Issues, Download Mode and Recovery Mode Help
Sent from my SGH-I897 using xda premium

korockinout13 said:
Nope, not a brick. You probably have a working button combination, but the recovery simply isn't there. You need to boot into download mode and flash a kernel.
Sent from my SGH-I777 using xda premium
Click to expand...
Click to collapse
thanks that fixed it. my phone is now awesome.

Cant get into stock recovery sucessfully

I have a stock Android 2.3.6 galacy exhibit 4g and when I boot up into recovery, an update is automatically found, installed and then reboots the phone doing the same thing every time recovery is booted into. My problem is, I cannot find this update package in my internal sd storage to save my life nor do I even know what the update package would be called. Can anyone please help?
Sent from my SGH-T679 using xda app-developers app

korruptedimage said:
I have a stock Android 2.3.6 galacy exhibit 4g and when I boot up into recovery, an update is automatically found, installed and then reboots the phone doing the same thing every time recovery is booted into. My problem is, I cannot find this update package in my internal sd storage to save my life nor do I even know what the update package would be called. Can anyone please help?
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
I'm not certain but it might be called update.zip, because if I remember that's the only name that will flash in the stock recovery. As for finding it, just try searching for update.zip. it should be on the root of the sdcard(no folder) because that's the only way I thought it could install. Any ways I'm probably wrong but at least you can try.
Sent from my Nexus 7 using xda app-developers app

theAPANT said:
I'm not certain but it might be called update.zip, because if I remember that's the only name that will flash in the stock recovery. As for finding it, just try searching for update.zip. it should be on the root of the sdcard(no folder) because that's the only way I thought it could install. Any ways I'm probably wrong but at least you can try.
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
i tried that too. it was unsuccessful. im almost out of ideas. does anyone have a clue about multi csc code that can automatically apply upon booting into stock recovery and then make it automatically reboot the phone?

This is exactly my problem. I just took a picture of it. this it what it says as soon as i boot into recovery. No options. Nothing. Just reboots
Sent from my SPH-D710 using xda premium

korruptedimage said:
This is exactly my problem. I just took a picture of it. this it what it says as soon as i boot into recovery. No options. Nothing. Just reboots
Sent from my SPH-D710 using xda premium
Click to expand...
Click to collapse
sorry i thought it posted my picture with the link. only place i have to upload it is on facebook but heres the link. if anyone can help, please do.
http://www.facebook.com/photo.php?f...1306577752552.492490.664252551&type=3&theater

korruptedimage said:
i tried that too. it was unsuccessful. im almost out of ideas. does anyone have a clue about multi csc code that can automatically apply upon booting into stock recovery and then make it automatically reboot the phone?
Click to expand...
Click to collapse
I'm not sure really what CSC code is but I think your talking about stock Odin flash able package. That should get you back to stock and flash the stock recovery and wipe everything. However i think it will bootloop after it flashes so you will have to boot into recovery and wipe data. If so check out the wiki. There is all the info you need. I have another idea though. I haven't done this myself but you should be able to push a clockworkmod recovery.img to the phone from a terminal if you have adb also in the wiki. I can't view your pic because I don't have a Facebook but maybe someone else can. Good luck
Sent from my Nexus 7 using xda app-developers app

That is the stock update pushed by Samsung from what it sounds like. Also sounds like a data packet might have dropped during the downloading of it causing a bad install. For simplicity get cwm Installed and boot thru that and flash from cwm. Wiki has all the info needs.
Wiki please read completely on rooting and install of cwm. Suggest 6.0.1.2 version. Personal preferences on that.
http://forum.xda-developers.com/wiki/Samsung_Exhibit_II_4G
Sent from my SGH-T679 using xda premium

Problem solved. I just randimly pushed the 3 buttons on the phone before the rebooting part came up in the script and finally got the menu, took may tries to get to that point but as soon as I got to that point, I was quick to install clockworkmod successfully. Now problem is gone. Hope this thread maybe helps someone else
Sent from my SGH-T679 using xda app-developers app

korruptedimage said:
Problem solved. I just randimly pushed the 3 buttons on the phone before the rebooting part came up in the script and finally got the menu, took may tries to get to that point but as soon as I got to that point, I was quick to install clockworkmod successfully. Now problem is gone. Hope this thread maybe helps someone else
Sent from my SGH-T679 using xda app-developers app
Click to expand...
Click to collapse
I have a similar problem. Which 3 buttons are we talking about? Power+Home+VolUp?

Easiest way, take out battery, push volume up and power, insert battery while holding, when Samsung appears release only power, when the android guy with package appears press menu
Sent from my SGH-T679 using xda app-developers app

Make sure you push the "Menu" capacitive button (left in the row of four buttons below the screen) when you see the green Android guy and the box. That will get you into the stock recovery menu.
I had to reboot into recovery a couple of times because I missed that part. What a pain!

Samsung Galaxy Tab 8.9 (SGH-i957) Soft Bricked...

I am looking for some serious help, I rooted my Samsung Galaxy Tab 8.9 4G LTE (SGH-i957) through the instructions that I found on this site by first installing Clockworkmode Recovery and then installing Jelly Bean 4.1.1 using Odin. Everything seemed to work fine with this, but then I decided to go one step further and load a over clocking kernel via Odin to increase my Processing speed. This process went fine through Odin and then after the auto reboot it all fell apart... the tablet will now only periodically display the first and second samsung logos and then just go blank or will display the battery icon with power off and plugged into the PC. Either way I have been unable to access the Boot screen or the Download screen...
IS THERE A FIX TO THIS? or am I just finished?
I have tried the "One Click Unbrick" program with no results and Odin intermittently recognizes the device is connected to the PC as the Tablet cycles through what appears to be an 1 second long boot up attempt.
Looking for someones brilliant idea haha...
Any and all help is greatly appreciated!!

Wrong section, but here goes. I'm no expert but Samsung devices are notoriously hard to eff up beyond fixing.
Can you get back into your recovery? I would do that, do all your normal wipes and reinstall a rom with its stock kernel.
If that doesn't work well then, I'd say Odin back to stock. If it's just a soft brick fixing it shouldn't be a problem.
Of course someone else who knows what they are doing could chime in here lol.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

You flashed a hc kernel on a 4.x system. This is a gaurenteed soft brick. Just odin back to stock through download mode.
Sent from my SAMSUNG-SGH-I727 using xda premium

orlandoxpolice said:
You flashed a hc kernel on a 4.x system. This is a gaurenteed soft brick. Just odin back to stock through download mode.
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I would love to do exactly what your suggesting but I am so far unable to access the download mode using the pwr and vol keys as normal... also where can I get a stock kernel as I was looking for one for hours yesterday with no luck? Do you have any suggestions on how to re-access the download mode in my current situation. Thank you for you suggestions thus far!

If you have a complete TWRP backup from before you flashed the OC kernel, just reboot into recovery and restore boot. That'll replace the HC kernel with what you were running before. That'll save you the effort of going through the entire process again to get back to JB.

st0nez0r said:
Wrong section, but here goes. I'm no expert but Samsung devices are notoriously hard to eff up beyond fixing.
Can you get back into your recovery? I would do that, do all your normal wipes and reinstall a rom with its stock kernel.
If that doesn't work well then, I'd say Odin back to stock. If it's just a soft brick fixing it shouldn't be a problem.
Of course someone else who knows what they are doing could chime in here lol.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Thank you for your advice and at the current time I am unable to access the recovery/boot/download screens... if I could get to that then we are back in business... I am looking for suggestions on how to regain access to that area first and then I would like to follow the advice for you all from there the stock kernel direction first...

nrvate said:
If you have a complete TWRP backup from before you flashed the OC kernel, just reboot into recovery and restore boot. That'll replace the HC kernel with what you were running before. That'll save you the effort of going through the entire process again to get back to JB.
Click to expand...
Click to collapse
Thank you for your response, so far Odin only picks up the device for a second before it disappears again and keeps repeating the cycle over and over agian. It is as if the Tablet keeps attempting a reboot cycle but fails to initialize the booting process? I don't know if I am making any sense to all of you that are much smarter than I at the stuff.
I am trying to time the start of Odin to the point that when it connects to the device that it is also recognizing the device at the same time... Kinda poking in the dark here as I am out of solutions...
The tablet attempts a reboot every 45 SECS and it recognized for only 3 SECS... Thoughts??

You need to get it to stop rebooting and into download or recovery mode. Try every button combo possible. If you hold power down for ten seconds it should shut off
Sent from my SAMSUNG-SGH-I727 using xda premium

Hold down the volume button near the power button as it boots to get into download mode... the other volume button will take you to recovery.

orlandoxpolice said:
You need to get it to stop rebooting and into download or recovery mode. Try every button combo possible. If you hold power down for ten seconds it should shut off
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
I have tried every key combination possible with no results the only thing the tablet does is do a quick single vibrate just like it does when you power it on and it boots up just without the actual booting process... and when the tablet is plugged into the PC it displays the battery symbol with the star bright icon over it like its thinking about charging but to my knowledge does nothing beyond that as far as charging is concerned. But it does do the single vibrate once every 45 secs as if it was booting up and is recognized on the PC through Odin for only 3 secs... not sure where to go from here now??

Hold the volume buttons down don't just press them. Also try button combos but instead of hitting power plug your charger in and out to get it to reboot.
Sent from my SAMSUNG-SGH-I727 using xda premium

Had these issues back in Nov when I tried to move up on twrp. Success to real download came when I used 10.1 tab button comnands
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

What are the tab 10.1 button commands?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

Humm.. Didn't write them down. Goggled "samsung 10.1 tab" and found the set I used. Same three buttons but different ways to press. Won't hurt to try because all that is left in this case is a $50 jtag job and two weeks.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app

samsung sgh-i957 wont turn on after i wiped catch partition and power of manually
samsung sgh-i957 wont turn on after i wiped catch partition and power of manually.
the device has refused to charge or even power on any more pls what should i do?

snwaede said:
samsung sgh-i957 wont turn on after i wiped catch partition and power of manually.
the device has refused to charge or even power on any more pls what should i do?
Click to expand...
Click to collapse
Doesn't sound good. Plug it in and push and hold the power button for 15 seconds. But I think it died on you.
Sent from my SAMSUNG-SGH-I727

how to restor boot sector partition on samsung sgh i957
jd1639 said:
Doesn't sound good. Plug it in and push and hold the power button for 15 seconds. But I think it died on you.
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
I have tried every thing but to no avail.
the partitions are scattered, because i install a voice call zip, and modem zip from xda site.
how can i restor the booting partitions back pls help its rely urgent.

snwaede said:
I have tried every thing but to no avail.
the partitions are scattered, because i install a voice call zip, and modem zip from xda site.
how can i restor the booting partitions back pls help its rely urgent.
Click to expand...
Click to collapse
Does Odin recognize your device? I would try to flash the factory firmware with odin. You can get it at sammobile.com for the i957
Sent from my SAMSUNG-SGH-I727

odin does not recognise my device
jd1639 said:
Does Odin recognize your device? I would try to flash the factory firmware with odin. You can get it at sammobile.com for the i957
Sent from my SAMSUNG-SGH-I727
Click to expand...
Click to collapse
odin does not recognise my device any more.
the device does not come on or enter download mode.

snwaede said:
odin does not recognise my device any more.
the device does not come on or enter download mode.
Click to expand...
Click to collapse
If Odin doesn't recognize it and it doesn't turn on it's dead.

[Q] HELP!! Captivate Stuck on AT&T Boot Screen After ClockWorkMod Install

[Solved!]
Hey everyone!
I followed the Cyanogenmod guide from cm's website on how to install cm 10 on rooted att captivate from android 2.2 froyo.
I followed the guide exactly up to installing cwm recovery via heimdall on a windows 7 (heimdall wouldn't work on an xp I have so I switched to my 7) and everything worked as it said it would, however after finishing and getting the blue bar on the download mode screen, I held the vol up/down and pwr keys per the guide and the phone went to the att logo screen that it shows when you first turn it on and it just flashes that screen.
I can get into download mode still but it won't go into the options screen to hard reset or use cwm recovery.
I rooted it using the superoneclick method and I backedup with titanium.
I haven't been able to find anyone on xda or any other site with the same problem as me (everyone with a similar problem had a different version of android or something so I was afraid to try the solutions given for them.)
Please Help!! Thank you so much in advance!!

http://forum.xda-developers.com/showthread.php?t=731989
Follow this guide after putting your phone into download mode.
Sent from my SGH-I897 using Tapatalk 2

chdiryoung said:
Hey everyone!
I followed the Cyanogenmod guide from cm's website on how to install cm 10 on rooted att captivate from android 2.2 froyo.
I followed the guide exactly up to installing cwm recovery via heimdall on a windows 7 (heimdall wouldn't work on an xp I have so I switched to my 7) and everything worked as it said it would, however after finishing and getting the blue bar on the download mode screen, I held the vol up/down and pwr keys per the guide and the phone went to the att logo screen that it shows when you first turn it on and it just flashes that screen.
I can get into download mode still but it won't go into the options screen to hard reset or use cwm recovery.
I rooted it using the superoneclick method and I backedup with titanium.
I haven't been able to find anyone on xda or any other site with the same problem as me (everyone with a similar problem had a different version of android or something so I was afraid to try the solutions given for them.)
Please Help!! Thank you so much in advance!!
Click to expand...
Click to collapse
See this Captivate - PC Connection Issues, Download Mode and Recovery Mode Help thread on more info on how to get the phone to boot into Recovery...http://forum.xda-developers.com/showpost.php?p=33227541&postcount=1
Sent from my SAMSUNG-SGH-I747 using xda premium

Thanks, I tried getting into recovery mode using the guide on that thread but no luck. I haven't gotten to try the first guide suggested yet so when I have time I'll try that. Thankfully I can get into download mode fine.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

Here is the last Stock Firmware released, i897ucKK4 Gingerbread 2.3.5, if ya wanna flash it instead.. http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 ...Since ya can get in Download mode.
Flashin to KK4 with the Bootloaders included (if u don't already have them) has solved the button combo problems for others who were not able to get into recovery, etc.
Heed all warnings about flashin bootloaders. It only takes a few seconds to flash the boot.bin and sbl.bin, but ya don't wanna interupt the flash durin that process, i.e. loose power, accidently disconnect micro usb/usb cable, etc.
Once ya have the gb boots, there is no need to flash bootloaders again.
Sent from my SAMSUNG-SGH-I747 using xda premium

Thanks so much, I'm gonna try that on Monday first chance I get!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

4-2ndtwin said:
Here is the last Stock Firmware released, i897ucKK4 Gingerbread 2.3.5, if ya wanna flash it instead.. http://forum.xda-developers.com/showpost.php?p=18370912&postcount=3 ...Since ya can get in Download mode.
Flashin to KK4 with the Bootloaders included (if u don't already have them) has solved the button combo problems for others who were not able to get into recovery, etc.
Heed all warnings about flashin bootloaders. It only takes a few seconds to flash the boot.bin and sbl.bin, but ya don't wanna interupt the flash durin that process, i.e. loose power, accidently disconnect micro usb/usb cable, etc.
Once ya have the gb boots, there is no need to flash bootloaders again.
Sent from my SAMSUNG-SGH-I747 using xda premium
Click to expand...
Click to collapse
How long should/could it take Odin to detect/recognize my captivate? I couldn't wait to try the KK4 flash, but I've waited for about 10 minutes and it's not showing anything in Odin.:\

It should only take a few seconds.
See that Captivate - PC Connection Issues...thread i linked u to in my reply a few posts up.
Sent from my SAMSUNG-SGH-I747 using xda premium

Well I've been up all night lol but I got everything to work!! I guess it all just clicked with me and I understood and found all the answers in threads. THANK YOU SO MUCH!! Your link and Odin one click worked perfect. I think I had a problem with the drivers, that's why it wouldn't detect it. I read in another thread it could be that and I tried reinstalling the Samsung drivers but no luck. So I just switched to my windows xp where I'd never used heimdall drivers(I was on my windows 7) and did it on there, worked perfectly! I then went on to reinstall cwm and then cm 10.1.2 and I love it! Now I'm waiting for the Google play store .zip to download so I can flash it onto my i897! THANKS AGAIN!!! :thumbup:
Sent from my SAMSUNG-SGH-I317 using xda app-developers app