Related
So apparently the official 2.2 Froyo is rolling out. I haven't checked yet but I will when I get home. I have some newb questions.
I got my phone and haven't touched a thing to it. Just added lots of apps. No root. No lag fix. Nothing.
My question is, if I upgrade this officially via Kies:
1) Do I lose my contacts / stuff ?
2) Do I lose my apps ?
I heard people saying that once you upgrade to do a hard reset of the phone -- why ? What happens if you don't ?
With this in mind, how and what is the best way to back up all my apps ? I haven't rooted but i DO have Titanium Back up. Would Z4root work for i9000m ? can anyone confirm ?
Funkadelick said:
So apparently the official 2.2 Froyo is rolling out. I haven't checked yet but I will when I get home. I have some newb questions.
I got my phone and haven't touched a thing to it. Just added lots of apps. No root. No lag fix. Nothing.
My question is, if I upgrade this officially via Kies:
1) Do I lose my contacts / stuff ?
2) Do I lose my apps ?
I heard people saying that once you upgrade to do a hard reset of the phone -- why ? What happens if you don't ?
With this in mind, how and what is the best way to back up all my apps ? I haven't rooted but i DO have Titanium Back up. Would Z4root work for i9000m ? can anyone confirm ?
Click to expand...
Click to collapse
1) no
2) no
3) hard resets are only if you experience a ton of lag while operating the phone
4) z4 does not work on jk4
BlackDino said:
1) no
2) no
3) hard resets are only if you experience a ton of lag while operating the phone
4) z4 does not work on jk4
Click to expand...
Click to collapse
how do you root jk4 then ? 2.1 eclair on bell i9000m
1. Phone is currently rooted. Do I have to unroot it before applying the firmware upgrade from Kies?
2. Do I have to perform a factory reset before applying the firmware upgrade?
Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.
rajesh26e4u said:
Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.
Click to expand...
Click to collapse
A lot of people have been complaining that their SD cards have been screwed. Luckily mine went through without any problems and hasn't given me any trouble so far.
Froyo is insane tho, before the phone used to lag a bit, now the moment i touch it it opens. No need for lag fix in my opinion, everything works blazing fast as is.
One thing to watch out for is the WIFI. It was working normally at the beginning but after 3 hours it just disconnected for no apparent reason and has trouble connecting back.
Good luck
rajesh26e4u said:
Why is this stupid update corrupting internal SD's left and right? Bell better get me a new phone! Cause this one is bricked(I think) it goes up til "S" logo and then nothing but blank screen. If I touch the button, they light up but still nothin on the screen.
I should have gotten a different phone to begin with, but too bad Canada doesn't have all the good phones US has like D2 DX HTC Evo etc. Going up to Bell tomorrow for an exchange.
Click to expand...
Click to collapse
Don't panic yet...
Try this
Volume UP/Power/Home(middle button)
Factory reset/Wipe
urfase said:
1. Phone is currently rooted. Do I have to unroot it before applying the firmware upgrade from Kies?
2. Do I have to perform a factory reset before applying the firmware upgrade?
Click to expand...
Click to collapse
1. NO
2. Good idea to factory reset before and after. Can't hurt and any noncompatible
programs and data will be gone.
Videonut said:
1. NO
2. Good idea to factory reset before and after. Can't hurt and any noncompatible
programs and data will be gone.
Click to expand...
Click to collapse
1) but will it erase root upon upgrading?
bimmerboii said:
1) but will it erase root upon upgrading?
Click to expand...
Click to collapse
Yep, but for optimised result, this is a must do!
You can probably have it work without doing a factory reset, but you can encounter weird behavior, bugs and stuff!
Anyway, you might end up doing it anyway to solve the firts boot issue
I'm one of the users who upgraded to Bell Froyo (from stock FW with root and lagfix - undid the lagfix before upgrading) and then encountered the broken internal SD card issue. I ran Volume UP/Power/Home(middle button) to reformat everything and it is up again. Inside the OS, I ran the internal factory reset again. So far so good. *crossing fingers*
I updated mine last night. However I've had major problems since. Initially it would just freeze up randomly and require removing the battery to get it back up and running.
Today I decide to reset it to defaults which seemed to go fine, although shortly after getting it all setup again, some Samsung app of sorts came up with an error and had to be forcefully closed. Then I was left with a black screen and only the notification bar.
Powered off the phone and went to turn it back on, and now it just loops through the Samsung GT i9000 screen (white writing). Not even the colourful S logo comes up.
I'm able to get it into Download Mode but not Recovery Mode. I'll have to do some reading about this Odin stuff tonight. Hopefully I can revive it, otherwise I guess I'll had to send it in for repairs. No idea if Virgin Mobile repairs will go through Bell or if I take it to them directly.
This is my first Android phone and I've only had it for just over a week. I thought I was making a good decision, but now I see it has quite a defect with the internal SD card failing.
Slow after upgrade
I upgrade my phone last night ( as per bell and Samsung) It is now slower than before. Quadrant Standard has it under 900.
Any ideas how to fix it?
bimmerboii said:
1) but will it erase root upon upgrading?
Click to expand...
Click to collapse
Just use SuperOneClick after you upgrade to Froyo, I've tested and have root on JK4
http://forum.xda-developers.com/showthread.php?t=803682
I have an unlocked phone from Bell that I already upgraded to the international (or European?) JPP/JPO 2.2, what is the best way to downgrade or restore back to default firmware before using Kies to get the official update? Does factory reset restore stock firmware?
I upgraded to official Bell froyo last night ..thn rooted.But how can i Unlock now? i tried using SGS unlock app it says no unlock codes found?? Please help
God damn samsung and bell!
it seems like they're giving defected phones to their costumers!
I have the corrupted sd card too, took it to guarantee now it takes more than 1 month to fix this!
this is f-ing xmas for god's sake. i want my phone
Same problem here!
I do have 2 good samsung galaxy s vibrants from Bell, however when i got the second one i upgraded to Froyo and now i cant unlock it because i cant read the stupid file inside the phone so,
How can i go back to my previous JH2 baseband?
Or
How can i unlock JK4?
I did my unlock on the other Galaxy using the script you donwload from somewhere in this website and then connecting the phone via usb cable with debugging on and mounting sd but with froyo i dont even know where my USB settings went!!!
Thanks for your help, greatly appreciated.
ciudadbonita said:
I do have 2 good samsung galaxy s vibrants from Bell, however when i got the second one i upgraded to Froyo and now i cant unlock it because i cant read the stupid file inside the phone so,
How can i go back to my previous JH2 baseband?
Or
How can i unlock JK4?
I did my unlock on the other Galaxy using the script you donwload from somewhere in this website and then connecting the phone via usb cable with debugging on and mounting sd but with froyo i dont even know where my USB settings went!!!
Thanks for your help, greatly appreciated.
Click to expand...
Click to collapse
Have you found any solution yet?? I am thinkin to flash back orignal samsung firmware using Odin n then unlock..atleast i will be able to use the phone then
Videonut said:
Don't panic yet...
Try this
Volume UP/Power/Home(middle button)
Factory reset/Wipe
Click to expand...
Click to collapse
what if after this, it's still stuck after the s logo boot up?
does this mean i have a broken internal sd?
Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.
Zink6 said:
Now just had a little problem. I updated to Darky's 8.1 no wipe version. It updated fine but the first time it booted, it froze. Now it keeps doing a boot cycle over and over again. I see the i9000m screen but I do not get to the S logo screen or in this case the transformer screen because it reboots. Can you help me plz? Thanks.
Click to expand...
Click to collapse
try a re flash of another ROM preferably a stock ROM then start all over again, similar thing happened to me earlier, i am quite new to all this but i dont know if its the kernel or lagfix i had what caused this...
i re flashed back to froyo and then installed darkys ROM then re installed my kernel last.. all is good (for now)
worked for me first time but when i went to sgs tools to upgrade your apps ie gallery, camera, it said no busybox installed but went ahead and done fine in v8.0 and i see that cwm changed from red to green too went to market for busybox to download it but when it goes to install phone just reboots all the time mmmm...
Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.
stepsch said:
Easiest way out of cycling boot:
pull battery
place it in
bring phone in download mode (not recovery!)
prepare Odin with a stock ROM
connect the phone to your PC and give it a kick thru Odin
When done feel free to switch again to Darkys (8.0) with wipe (you will loose data) and afterwards upgrade to 8.1.
Click to expand...
Click to collapse
YES !!! i agree, it is a pain.. but we love our phones and we would do anything for them its always best to flash back to standard FW if you ever get a problem...
I myself experienced this. Whenever I installed a new software, it would just boot. I got fed up because darky's forums are also down and there is no discussion. flashed doc's rom. Now everything is fine.
...mh... but it's not caused by Darkys ROM. This cycling boot feature may appear at all ROM, at all lag fix actions and so on. It depends how proper you interact with phone- and ROM-features while configuring. A lil disturbance during your session (by you or battery issue or whatelse) or a not so well prepared basic from where you start and your unlimited-feature-wishlist-and-paint-it-golden-one-click-action is enough to interrupt the whole thing and run into trouble.
It was and is all the same - since DOS or C64. And it will be the same, even when iPhone is on level 12.x or Android will be able to beam you elsewhere thru the barcode scanner.
It's a game. Nothing more. And game means lot of fun - and in the beginning a certain thrill when your phone stuck first time and you are thinking: "... f*ck... bricked..."
yup same for me
cycle boot thing
didnt enable download mode before that....
can get into debug screen thou but wiping it doesnt help
anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise
anyone with a suggestion on what i can try? warrenty = off so im screwed otherwise
Just tell the warranty guy darky screwed it .
OR
http://forum.xda-developers.com/showthread.php?t=853950
jje
cant even boot the phone mate
so ehm i dont get it....how can odin help me ?
is there any way of getting it into download mode still when it doesnt boot up? i heard about that JIG thing they made themself...isnt that just like the microusb cable that comes with it to the pc? i dont get it sorry if im trippin but im maddd at myself for even trying this lockscreen thing
http://forum.xda-developers.com/showthread.php?t=819551
jje
Thanks guys for all the replies. Now I did try flashing a stock rom but with no results. Was still having the same thing happening to me. If you guys can give me the link to the files you used to solve this problem, that would be great. Also just for your information I have a Bell i9000m unlocked running on fido. And NO its not an sd card failure lol.
As for DarelSteilz85, I did make one of those JIG usb for myself. It easy, just get the micro usb and strip it bare to the point you can see the pins on the usb which usually are connected to the wires and get a resister to connect one pin to another. Now for which pins, I remember it was 4 and 5 that you had to connect through the resistor but double check as I am not sure. Also the resistor has to be a certain level which I forgot so double check that also. Good luck.
http://forum.xda-developers.com/showthread.php?t=853950
What i use for problems .
jje
Hello
I had some trouble with a bricked SGS for about 3 weeks ago but got it on the run again with some flashing help.
Now i have this strange problem. If i turn it off or if it just goes black out, which it has begun to do after i flashed it, then it can't turn on, it just show the sun looking loading icon and then a empty battery icon and then turns off.
I can't load recovery mode with the combo, but i can make the download mode combo work.
But if i connect the phone with the charger/usb i recognize it and show that it charging up. Now it boot and shows the Galaxy I9000 model no. image.
Had tried flashing newer versions From XXJPO -> XXJPY -> XWJS3 and both with and without pre-partition and it still occur.
Now the question: Does any of you experienced people know this problem and can it be fixed somehow ?
Thank you in advance
First i would liik to charge phone for 24 hours and also check with another battery .
jje
JJEgan said:
First i would liik to charge phone for 24 hours and also check with another battery .
jje
Click to expand...
Click to collapse
The battery don't seem to be defected. Once the phone is booted with a cable connected, it goes without problems. It just will not boot without a charging signal.
Bump - Still actual
Try using Block 2 Odin method here to go back first to Eclair and if that works test phone then upgrade to Froyo .
jje
JJEgan said:
Try using Block 2 Odin method here to go back first to Eclair and if that works test phone then upgrade to Froyo .
jje
Click to expand...
Click to collapse
That happened to me a while back and I couldn't find a fix for it. Ended up doing the above and it resolved it.
Z3icon said:
Hello
I had some trouble with a bricked SGS for about 3 weeks ago but got it on the run again with some flashing help.
Now i have this strange problem. If i turn it off or if it just goes black out, which it has begun to do after i flashed it, then it can't turn on, it just show the sun looking loading icon and then a empty battery icon and then turns off.
I can't load recovery mode with the combo, but i can make the download mode combo work.
But if i connect the phone with the charger/usb i recognize it and show that it charging up. Now it boot and shows the Galaxy I9000 model no. image.
Had tried flashing newer versions From XXJPO -> XXJPY -> XWJS3 and both with and without pre-partition and it still occur.
Now the question: Does any of you experienced people know this problem and can it be fixed somehow ?
Thank you in advance
Click to expand...
Click to collapse
i agree wiv the suggetions frnds given.galaxy is hard to brick.i did all sort of unusual things an even uptodate lol.don worri m8 jus flash to older stock and hard reset.check the connectivity pins,to b clean even the battri pins.somtimes its best u format ur eternal xd on pc an format.and giving another hard rest makes things better.i had once formated my int sd on pc and the phone had emptied,then i flashed and things worked fine.personally sticking to stock rom is better if u dont wan troubles,cause every custom rom has som drawback an needs a lil knownledge to tweak it up.check kies if ur on it,i recomend download the recovery driver in it.hope u get some help.cheeeerzzzz
Same here...
Hello everyone,
I too have the same issue as stated in the first post.
I even had issue sometimes that when boot up.
The USB notification icon wouldnt turn off even if i wasn't connected.
Some threads suggested that I clean the USB port, which i did and nothing changed, even if it looked a little bit dirty in there (Hard to say since it is really small).
Now the USB port looks just as new but same issue: I cant power on the unit witout having it connected with a power cord.
Also, when offline in download mode, Odin detect the unit and I can flash my device (Which I did yesterday by flashing UGJH2 re-partition and UGJL2 not re-partition) but when boot up, I can't make it to sync up with the computer. No sync possible (Also now I'm not rooted anymore).
The unit is under warranty but since it is unlocked with a tool that needed rooting to lock back, abviously I would need to be rooted again but to do it, I need to be able to sync it with my PC (No cant do here).
I have some engineer at work that offered me to check it out for me, they think it is related with the USB port, but I'm worried about the warranty seal. I found how to disasemble it but does anybody knows where it could be located on the I9000M from bell (Vibrant)? Does it have one?
Anybody have any better suggestion or a second opinion, please?
Its my 3rd Galaxy S from Bell and Samsung is now the last company I would think when buying a new mobile.
EDIT: Did the Block 2 Method and now it doesnt even want to boot at all (Did the JPY_JPY_JPY.tar part), now it shows the loading sign even faster and the battery doesnt even show it self at all.
Hello again people!
Got my friend engineers to open the phone and they didnt find anything that would cause my issue (Also no warranty label...).
Does anybody knows how to root a Galaxy S with Froyo without a PC?
I want to return my phone to Bell Canada under warranty but my phone is unlocked and I want to lock it back before sending it back and I need to be rooted to do so...
Thanks for your help!
I got the same problem here. Could someone tell me more on this. What is this Block 2 ODIN method?
this problem can be caused by water or sweat that got inside the case of your sgs.
the biggest hole in the case is micro-usb port) i think condensation accumulated there and locked some contacts.
try to disassemble the phone and carefully clean and dry it.
this helped me.
Hello Xda members , i have just upgraded my galaxy note from gingerbread to official ICS thru samsung kies , everything went smoothly after upgraded , but my note's screen keeps lighting up and dim for no reason on lock mode , sometimes it continues for several minutes then goes off ,sometimes its like a rotating cycle , it would come back after each 30 minutes...there is no background apps running . i have no such problem using the gingerbread..please help...
westsynd said:
Hello Xda members , i have just upgraded my galaxy note from gingerbread to official ICS thru samsung kies , everything went smoothly after upgraded , but my note's screen keeps lighting up and dim for no reason on lock mode , sometimes it continues for several minutes then goes off ,sometimes its like a rotating cycle , it would come back after each 30 minutes...there is no background apps running . i have no such problem using the gingerbread..please help...
Click to expand...
Click to collapse
I have the same problem, although i didn't upgrade to ICS and still running the original Gingerbread as bought.
I wish someone has a solution for this problem .
Have you tried to factory reset it?
jonpaslim said:
Have you tried to factory reset it?
Click to expand...
Click to collapse
Thank you "jonpaslim" for your prompt reply.
Actually I didn't.
Because I'm worry about getting bricked by factory reset.
And also I'm not sure that I can do it the right way.
.
wisenada said:
Thank you "jonpaslim" for your prompt reply.
Actually I didn't.
Because I'm worry about getting bricked by factory reset.
And also I'm not sure that I can do it the right way.
.
Click to expand...
Click to collapse
If your running in gingerbread it will not brick your phone. Im directing this answer to you when you said that you are still in gingerbread. If your on ics yes it will. Im sorry i have to be spicific next time.
jonpaslim said:
If your running in gingerbread it will not brick your phone. Im directing this answer to you when you said that you are still in gingerbread. If your on ics yes it will. Im sorry i have to be spicific next time.
Click to expand...
Click to collapse
Thank you so much for your kind support and follow up, I will try it and get back with the result.
Till then thanks again
.
Hi guys
I performed a factory reset, and everything is ok now (ok for 24 hours till now).
Although I didn't know what was the reason, But I'm happy that my Note is doing good.
Thank you for support, and special thanks to "jonpaslim".
Regards
.
wisenada said:
Hi guys
I performed a factory reset, and everything is ok now (ok for 24 hours till now).
Although I didn't know what was the reason, But I'm happy that my Note is doing good.
Thank you for support, and special thanks to "jonpaslim".
Regards
.
Click to expand...
Click to collapse
Im glad to help you. Thank you also.
this problem is called kernel wake lock.. you must downgrade to gb, do a full wipe then install a fresh ics via kies or odin, after booting up in ics go into your recovery mode holding volume up + home button + power key and clear your cache 4 time in a row this will solve your issue and maybe increase your battery life if you having any problem on ics related to battery backup
Hello!
I just wonder what could cause hard brick in my Note. I had the official ICS and flashed the official JB 4.1.2 (N7000XXLSZ_N7000OXXLS4_XEO) with no errors at all. The phone worked fine half a day then I noticed strange pop up information on the screen. I can not remember what it was becouse of a foreign language (spanish as far as I remember) and it was something like sim related block. I could only make an emergency call. I removed the battery, put it in again, saw samsung logo and then the phone turned off. That is it. It won't turn on anymore. Looks like dead. I tried to charge it with no effect. No download mode or recevery mode available. Odin doesn't see it, neither does PC.
The only thing I could have done wrong was flashing XEO over PLS csc. Does it matter regarding the brick?
Thanks for any advices.
wishkil said:
Hello!
I just wonder what could cause hard brick in my Note. I had the official ICS and flashed the official JB 4.1.2 (N7000XXLSZ_N7000OXXLS4_XEO) with no errors at all. The phone worked fine half a day then I noticed strange pop up information on the screen. I can not remember what it was becouse of a foreign language (spanish as far as I remember) and it was something like sim related block. I could only make an emergency call. I removed the battery, put it in again, saw samsung logo and then the phone turned off. That is it. It won't turn on anymore. Looks like dead. I tried to charge it with no effect. No download mode or recevery mode available. Odin doesn't see it, neither does PC.
The only thing I could have done wrong was flashing XEO over PLS csc. Does it matter regarding the brick?
Thanks for any advices.
Click to expand...
Click to collapse
time to claim warranty..