Database Develop

[Q] Help! I Think I bricked my phone!!

for some reason i went to reboot my phone and it wontboot just hangs.. can boot to recovery and do a factory reset.. but still wont boot.
cannot boot to download mode with vol up keypad and power.. just continually reboots to the samsung white message and starts over.. any suggestions or should i just send it back?

got it working whey.. it wouldnt boot up to recovery.. got it to goto recovery during a boot loop by plugging in usb.. i think.. the only think i can think is that earlier today i replace the mms.apk and mms.odex with an earlier version from jf3.. didnt like that at all. but i didnt reboot till later.. this was to try and work around the messaging bug in jg1.. .since i had to reinstall i am happy to report as previously reported that the the csc from jff messaging works fine the the modem and core files from jg1.. (that is what i reflashed it too..)

[Q] Help! Think I bricked my phone!!
Flashed to WJG1
Started Odin,it started to do its thing.halfway through I got the USB disconnect sound.Odin stopped , I now have a green screen

And u cant boot it to either restore or download mode?
Sent from my GT-I9000 using XDA App

Remove battery! put it in again!
Start in download mode! (volume down+home+power)
and reflash!

Keeps on happening.Have tried WJG1 and WJG5.With WJG5 I thought it was going to work.Got 3/4 of the way then it disconnected.

saldawop said:
Keeps on happening.Have tried WJG1 and WJG5.With WJG5 I thought it was going to work.Got 3/4 of the way then it disconnected.
Click to expand...
Click to collapse
Did you use the other 512.pit file? and did you check re-partition?
Make some screenshots!

Yes to both

Did you install the latest version of Kies? (just for the driver?)
And did you close kies before you started flashing?

I think its worked.
YESSSSS
Im on WJG5 ....shall I just leave it on that. I thought I would roll back to JG1 with r2, as I was having problems with it forever scanning the SD Card, and with MTP mode keep on flashing ...initializing.
Which it is doing right now
I have the latest version of Kies installed...and I never open it.
Edit: SHOULD I be able to roll back to an earlier firmware?

saldawop said:
I think its worked.
YESSSSS
Im on WJG5 ....shall I just leave it on that. I thought I would roll back to JG1 with r2, as I was having problems with it forever scanning the SD Card, and with MTP mode keep on flashing ...initializing.
Which it is doing right now
I have the latest version of Kies installed...and I never open it.
Edit: SHOULD I be able to roll back to an earlier firmware?
Click to expand...
Click to collapse
As far as i know you can flash whatever firmware you would like! the best option right now is to use JG5!
Correct me if i'm wrong!

Are you on WJG5?
Do you have any problems?
The MTP constantly initializing (Not sure thats a real problem as I turn it off and use mass storage, but it should work so I want it to)
The constant Media Scanning.
Doesnt feel particularly quick.
And with WJG1+r2 I could run scripts for lag and market and it was pretty quick.
Can I run the scripts with WJG5?? r2 made it nice and easy.

saldawop said:
Are you on WJG5?
Do you have any problems?
The MTP constantly initializing (Not sure thats a real problem as I turn it off and use mass storage, but it should work so I want it to)
The constant Media Scanning.
Doesnt feel particularly quick.
And with WJG1+r2 I could run scripts for lag and market and it was pretty quick.
Can I run the scripts with WJG5?? r2 made it nice and easy.
Click to expand...
Click to collapse
Yes i am on WJG5! you can root it and you can use the lagfix!
I am currently using it without the lagfix and it works great! no blackscreens whatsoever!
Question! did you remove the simcard and sd card when you where flashing with odin?
It shouldn't be scanning for media all the time! don't know whats wrong!

Yes I did.

Following a tutorial which says to uninstall Market from Applications.When I go to Applications(clicking Fliter>All) and bringing up Market there is no option to delete

Here mate, have a look at some suggestions.
And some other quick - you should have run kies before the flashing, so it would install all the drivers, it might be your problem.
Maybe a moderator can pin this, ot some other inbricking topic/guide?
Link to tutorial - http://forum.xda-developers.com/showthread.php?t=725858

Yeah but I have flashed it about half a dozen times previous with no problems.

Well, I dont know what happened, but after setting up my phone pretty much as it was before I thought "I didnt do a factory reset after flashing the rom", so I did so.Rebooted,went to Market and all apps are showing

What does a factory format do??
I thought it would wipe everything off the phone?
After doing one on my newly flashed SGS, I had a look at the SD card and all the folders of games/programs were still there.

i was afraid too when i flashed with the latest firmware last week
odin did nothing, so after 10 mins i remove the usb cable and put it again
then restart computer and put the usb cable ... but the computer didn't see the phone
i turn off the phone, it turn on automaticaly with a nice logo with a phone and a computer... like the phone wana tell me : "You dumb idiot, you bricked me"
I was near to be killed (its my wifes mobile, not mine) but then i tried to return into download mode and it worked and lucky the computer saw the phone
ps: i did this night, when my wife was asleep, so she didn't noticed, but if she noticed or if it was bricked ... well i guess she would kicked my ass and i would be 500box poorer

[Q] Help. Thrill wont boot (at&t logo), messed up pretty good

1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....

faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
the 200 dpi setting does not work on the Thrill, which is why you are stuck in "bootloop"

faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Well looks like you're kinda screwed since you don't have clockwork installed, I'm not sure if you can install a new ROM... but have you tried EVERYTHING in android recovery?
If you don't know how to get to recovery... it's Hold down volume key + 3d + power, until it vibrates then use arrow keys to move around and 3d to select if you dont have clockwork...

faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Do you havet the emergency mode like most LG smartphones?Here is how you check pull out the battery and the plug it in(so your phone turns off) and then hold down the volume up +voulume down and power button if it worked you should see a yellow screen and a "Emergency mode!!" title.Then google for a kdz update tool and a kdz firmware for YOUR phone.You will also need the LG mobile united drivers.If you are on windows go to control panel and disable the lg modem.Then connect your phone(in emergency mode) to the computer open the update tool then click on select KDZ and navigate to your KDZ then in phone mode select emergency_something iys the only one.Than click flash KDZ and after about 5min your phone should reboot and it wilk work.Its importiant to note that you will lose everything on your phones memory its like you flash a rom you start out fresh you also loose root.Good luck!
Sent from my LG-P350 using XDA premium

faresr said:
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
About the ADB it shows "device not found" because you didn't enable usb debugging.
Sent from my LG-P350 using XDA premium

Your gonna need to flash the .bin file for the thill
Thrill 4g on O3D

https://rapidshare.com/#!download|2...391931|R~E48599C3AAD1D44505C904C6E6A52A13|0|0
Thrill 4g on O3D

Download the above file then go to o3d forum general section sticky about how to flash .bin we dont have a .kdz for this phone so you gotta do it with the .bin
Thrill 4g on O3D

hoskopico said:
Download the above file then go to o3d forum general section sticky about how to flash .bin we dont have a .kdz for this phone so you gotta do it with the .bin
Thrill 4g on O3D
Click to expand...
Click to collapse
Ok thx I didn't know that it was different sorry if i made any confusion
Sent from my LG-P350 using XDA premium

Dont be sorry im just trying to help ya out our device has zero support from LG. When you select the files to flash use both the .bin and fls to flash you gotta find the P925.dll i think its in the dev forum here i dont remember which post though
Thrill 4g on O3D

Try the installing gingerbread and back to stock thread i think its in the mediafire download on there
Thrill 4g on O3D

I don't think i have the emergency download mode... I tried the button combination but it didn't work... so I still can't get my computer to recognize my phone to do anything...

Or try flashing a kdz for p920 then do the bin flash to get it back to stock froyo cuz you have to install the driver with phone pluged in and recognized
Thrill 4g on O3D

hoskopico said:
Dont be sorry im just trying to help ya out our device has zero support from LG. When you select the files to flash use both the .bin and fls to flash you gotta find the P925.dll i think its in the dev forum here i dont remember which post though
Thrill 4g on O3D
Click to expand...
Click to collapse
I know what you mean LG doesn't really care about mine device too.It's like they are nice untill you buy their phone.After that they don't care.
Sent from my LG-P350 using XDA premium
http://www.danasoft.com/ sig/****yeah287168.jpg

faresr said:
1. Rooted
2. Don't think I had USB Debugging on prior to this situation
3. Didn't flash a rom (dont even know how)
4. don't have clockworkmod
I installed the root required app LCD density changer by beansoft... tried permanently changing my lcd density (resolution) to 200, looked back at phone several minutes later and it was stuck on the at&t logo. I didn't do a backup like they said, in case anything goes wrong (didn't expect anything to go wrong.........). Now, everytime I try to boot my phone, i get stuck at the At&t logo screen (NOT infinite loop... just frozen logo). I have tried factory reset multiple times... but ofcourse that didn't work because that doesn't affect system preferences ( like the density/resolution).
Beansoft suggests this to fix the issue... but i can't get it to work
densitychanger.blogspot.(com) (towards the bottom, where the highlighted green text is)...
How can i get that file onto my phone's memory? My phone wont even turn on. I tried putting it on the microsd card, but the file doesnt show up in recovery.
Someone please help me... I just want my phone working again... By whatever means... Flashing a new rom, the update.zip method by beansoft... idk ... just want it working...
HELP :'(
P.S. I dunno how to work adb... every time i try and use it, i get the "device not found" thing... ( i have the drivers installed)... So if that's how I have to fix my phone... PLEASE be very descriptive in instructions....
Click to expand...
Click to collapse
Im having the same problem as the person before me, but my phone is stuck on the lg logo screen. My phone is rooted and I do believe I have installed clockworkmod when root manager asked me to. My phone froze on me while going through the root manager app, when I tried formatting it through the reboot screen I ended up with E: can't mount CACHE:recovery/ command, E: can't mount CACHE:recovery/log, and E: can't open CACHE:recovery/log.
I've tried following instuctions from this site: http://www.lg-phones.org/how-to-flash-lg-thrill-4g-to-android-2-3-gingerbread.html
Until the last one cause i don't have an option to instal stuff from my sd card
I've also tried this one: http://http://forum.xda-developers.com/showthread.php?t=1270832
but again I have no option of the sd card or running abd commands
only options i have are:
reboot system now
wipe data/factory reset
wipe cache partition
wipe cache partition and package recovery
wipe nv dynamic partition

tbcxfallen said:
Im having the same problem as the person before me, but my phone is stuck on the lg logo screen. My phone is rooted and I do believe I have installed clockworkmod when root manager asked me to. My phone froze on me while going through the root manager app, when I tried formatting it through the reboot screen I ended up with E: can't mount CACHE:recovery/ command, E: can't mount CACHE:recovery/log, and E: can't open CACHE:recovery/log.
I've tried following instuctions from this site: http://www.lg-phones.org/how-to-flash-lg-thrill-4g-to-android-2-3-gingerbread.html
Until the last one cause i don't have an option to instal stuff from my sd card
I've also tried this one: http://http://forum.xda-developers.com/showthread.php?t=1270832
but again I have no option of the sd card or running abd commands
only options i have are:
reboot system now
wipe data/factory reset
wipe cache partition
wipe cache partition and package recovery
wipe nv dynamic partition
Click to expand...
Click to collapse
You don't have clockwork then.That is your stock recovery.I had this problem too.I flashed the wrong recovery and i got stuck on the LG logo.I fixed it using fastboot flasher idk is it the same combination but on my phone it is volume up+call+power button.Uf it is correct you should see a sign saying fastboot mode udc_start or something like that then use the fastboot flasher to flash a recovery image for your phone.After the flash is complete reboot your phone but first do a NORMAL boot so you can see if the problem is solved.If it worked then you can safely boot into recovery.
Sent from my LG-P350 using XDA premium

Thank you for your support guys, but as it was to difficult, I just got a new one from at&t

I am in similar situation but I am rooted AND I have CWM on my phone. I can boot into recovery just fine and install from sd card and all that jazz but when I try to boot normally I don't get past the LG logo. It just hangs there forever. Do I just have to get a flashable ROM onto the SD card and boot into recovery and flash??
I have already tried wiping data, cache and dalvik to no avail.
Any suggestions??

cwburns32 said:
I am in similar situation but I am rooted AND I have CWM on my phone. I can boot into recovery just fine and install from sd card and all that jazz but when I try to boot normally I don't get past the LG logo. It just hangs there forever. Do I just have to get a flashable ROM onto the SD card and boot into recovery and flash??
I have already tried wiping data, cache and dalvik to no avail.
Any suggestions??
Click to expand...
Click to collapse
What did you do?When did the problem start(I mean after doing this or that)
Sent from my LG-P350 using XDA premium

nerot said:
What did you do?When did the problem start(I mean after doing this or that)
Sent from my LG-P350 using XDA premium
Click to expand...
Click to collapse
I rooted phone, everything fine. I flashed CWM, everything fine. When I rebooted system from CWM then phone booted but hung at the LG logo. Now only thing I can do is boot into recovery or boot to the LG logo for hours... Don't even know how this could have happened as I haven't flashed anything, just root and CWM...

Stuck in boot

My LG Optimus 2X from windmobile is stuck in boot screen. I recently rooted my phone which worked perfectly fine than I installed CWM ext which messed things up, phone was hard resetting every time it started up. So I went to the market place and installed CWM and installed recovery from within the app and decided to install [ROM] MIUI v4 2.7.20 [Multilang][New base] [25/07/2012] through the CWM app. It loads up in recovery FINALLY and I installed it. After reboot its just stuck on LG boot screen I cant go into recovery mode either it just reboots and gets stuck at boot screen. is there anything that i can do to recover the phone?

how u tried this? - http://forum.xda-developers.com/showthread.php?t=1006745
i have done it a couple of times after a bad flash on my P990 and it works great.
i got the NVFlash ready, take out the battery and while pushing down Power and Vol. down button i connect the usb cable and it starts up and u can open NVFlash and let it do it's work.

thank you lets see if it works out:fingers-crossed:

puma99dk| said:
how u tried this? - http://forum.xda-developers.com/showthread.php?t=1006745
i have done it a couple of times after a bad flash on my P990 and it works great.
i got the NVFlash ready, take out the battery and while pushing down Power and Vol. down button i connect the usb cable and it starts up and u can open NVFlash and let it do it's work.
Click to expand...
Click to collapse
hey so NVFlash did work but now i am getting no signal, I went to settings> About phones > baseband: unknown. So I decided to use smart flash and flash the "LG_P990_1035_21_2011-06-22", it just wouldn't flash it loads up to 50% than i get timed out error. Is there anyway to fix this issue.
Thanks.

ali2k4 said:
hey so NVFlash did work but now i am getting no signal, I went to settings> About phones > baseband: unknown. So I decided to use smart flash and flash the "LG_P990_1035_21_2011-06-22", it just wouldn't flash it loads up to 50% than i get timed out error. Is there anyway to fix this issue.
Thanks.
Click to expand...
Click to collapse
this might be an issue with BB and RIL combination...try to install the GetRIL app from the play store and try to install a recommended RIL....reboot and check...
you can try the smartflash after trying this...
Hope this helps

The problem was that I was flashing p990 firmware on my P999. oddly enough it ran but without any baseband. long story short I used the ROM from this thread http://forum.xda-developers.com/showthread.php?p=17258229 and it worked I was in the wrong phone section the whole time. thanks every one for the help couldn't have recovered it without your help thanks :victory:

[Q] LG - P970 bootlooping

Hey guys, i really need some help asap. I really know i will be called a noob for asking this, but i had flashed V20n into my Lg Optimus Black (P970). After i installed Zeus mod on it i got a few bugs, very rarely and some times it wouldnt start. I used to take the battery out for a few hours and everything worked perfect. The last 2 days to it refuses to open. Stays on the LG screen and the buttons flash (has reached CMR screen, i have done a format and then restarted it, and nothing works now AGAIN). I have used easy flasher, trying to install the v20s from 3 different forums but none of them helps. I would really appreciate if i could get some useful fast answers or other link refferals. I have absolutely no personal time within the day, and i will need to know fast in case i need to take it to the service center.

HeinekenAmstel said:
Hey guys, i really need some help asap. I really know i will be called a noob for asking this, but i had flashed V20n into my Lg Optimus Black (P970). After i installed Zeus mod on it i got a few bugs, very rarely and some times it wouldnt start. I used to take the battery out for a few hours and everything worked perfect. The last 2 days to it refuses to open. Stays on the LG screen and the buttons flash (has reached CMR screen, i have done a format and then restarted it, and nothing works now AGAIN). I have used easy flasher, trying to install the v20s from 3 different forums but none of them helps. I would really appreciate if i could get some useful fast answers or other link refferals. I have absolutely no personal time within the day, and i will need to know fast in case i need to take it to the service center.
Click to expand...
Click to collapse
What about smartflashtool, did you try it yet?
If not, download it (use search to find it), then go to my noob how to, download the patched v20s provided in there and then it should work fine again. Dont forget to flash the superuser.zip and do a data, cache, dalvik wipe.

N00BY0815 said:
What about smartflashtool, did you try it yet?
If not, download it (use search to find it), then go to my noob how to, download the patched v20s provided in there and then it should work fine again. Dont forget to flash the superuser.zip and do a data, cache, dalvik wipe.
Click to expand...
Click to collapse
I have tryed it 3 times but with nothing happening. I flashed the AP and the CP file through smartflash :-/ everything in the console succeeds but when it resets target and phone reboots, it wont open. It was just lying there 30 min on the lg sign and the buttons flashing

HeinekenAmstel said:
I have tryed it 3 times but with nothing happening. I flashed the AP and the CP file through smartflash :-/ everything in the console succeeds but when it resets target and phone reboots, it wont open. It was just lying there 30 min on the lg sign and the buttons flashing
Click to expand...
Click to collapse
Try to flash a v10 version. Or try b2c app and emergency recovery.
Sent from my LG-P970 using xda app-developers app

Are you using touch version of clockworkmod recovery? If yes try to use normal clockworkmod recovery. I have a case before whatever rom i flashed i always ended into bootloop because of the touch version of clockworkmod.

Mr. Dimples said:
Are you using touch version of clockworkmod recovery? If yes try to use normal clockworkmod recovery. I have a case before whatever rom i flashed i always ended into bootloop because of the touch version of clockworkmod.
Click to expand...
Click to collapse
yes, i have the touch mod. How can i switch to normal? Works by flashing?
N00BY0815 said:
Try to flash a v10 version. Or try b2c app and emergency recovery.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
is there any chance that by switching to v10 it will work? Also, will i be able to go back to v20 after that? And, i got no idea how to use a b2c app so ill look in the site. Just incase i dont find anything can u send me a link plz?
ty

N00BY0815 said:
Try to flash a v10 version. Or try b2c app and emergency recovery.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
b2c emergency recovery did nothing... :-/

Fixed
i cant install cwm with the kdz file... i tryed to reflash with smartflash and your patched rom, but stuck into bootloop. Every time i use smartflash i bootloop ... :-/ when i run the kdz file update, everything works great but i canw find a way to flash cwm on it :-/

methods tryed:
i used the method described here: http://forum.xda-developers.com/showthread.php?t=1512203 "FAILED" i have tryed all applications like R&D Test tool, BlackJack etc. But tey all fail... Only one that used to work was the smartflash one, that for some odd reason says it succeses but makes my phone bootloop :-/

Try to flash a very old one like V10A_00.kdz that you can root with GingerBreak-v1.20.apk

Tried to install Xposed, now my phone stuck on loading screen, what should i do? help

Xposed from this theme https://forum.xda-developers.com/showthread.php?t=3034811 (3.1.1.akp)
Phone - Galaxy S5,
Android 5.0, as i remember.
I tied to install the program, chose variant with backup in the installer, but now my phone is stuck on loading screen for like 20 mins, showing samsung animated logo.
What can i do now?

Are your rom is stock or custom ? And are you using which recovery ? Twrp ?

Restore your backup.
Gesendet von meinem Moto G 2014 LTE mit Tapatalk

DarkMountain said:
Are your rom is stock or custom ? And are you using which recovery ? Twrp ?
Click to expand...
Click to collapse
I don't even know what rom is. :S
uhm, well and i dont have a copy of my phone's system on PC or something like that. I'm not even sure if the installer really did a backup.
gothicVI said:
Restore your backup.
Click to expand...
Click to collapse
If i know how to do it! I'm kinda lame in phones and android. Could you tell me something i can do now? I'm currently trying to find some program for PC now, so i can connect my phone and hopefully do something
Even hard reset (Volume down + Home + Power buttons at the same time. ) does'nt works now. i keep getting the loading logo.

It seems you are new to android, custom ROM, recovery etc. and this indicate you haven't took nandroid backup of your ROM to restore it later... Now what you can try is, go to stock recovery with pressing phone buttons combination ( google it according to your phone model ) and do factory reset (warning- it will wipe all your data but may set your phone to boot and work ) ..at least try it when nothing is working

sk99 said:
It seems you are new to android, custom ROM, recovery etc. and this indicate you haven't took nandroid backup of your ROM to restore it later... Now what you can try is, go to stock recovery with pressing phone buttons combination ( google it according to your phone model ) and do factory reset (warning- it will wipe all your data but may set your phone to boot and work ) ..at least try it when nothing is working
Click to expand...
Click to collapse
Yeah, i'am.
I tried hard reset several mins ago. Problem seems to be very interesting, i wonder if i find a solution.
Will reply here if i ever get i working again.

nerinz said:
Yeah, i'am.
I tried hard reset several mins ago. Problem seems to be very interesting, i wonder if i find a solution.
Will reply here if i ever get i working again.
Click to expand...
Click to collapse
Just Google "How to back to stock with odin and write your (phone model). If you follow the guides carefully your phone will format you will lose your all data but your phone is will work.

DarkMountain said:
Just Google "How to back to stock with odin and write your (phone model).
Click to expand...
Click to collapse
Will try tomorrow, TYVM!

I managed to update my system via Odin program, everything is fine now! Even my settings\apps survived!
Thanks you all for the help.
The problem is solved.

I managed to update my system via Odin program, everything is fine now! Even my settings\apps survived!
Thanks you all for the help.
The problem is solved.

nerinz said:
I managed to update my system via Odin program, everything is fine now! Even my settings\apps survived!
Thanks you all for the help.
The problem is solved.
Click to expand...
Click to collapse
I almost bricked my Samsung G5 (the ATT version with the screwy locked bootloader, I think?) almost this exact same way about two years ago. It took a bit with ODIN and some time on the forums here, but eventually I got it working again. Not fun but I am glad everything worked out for you as well.
To be honest I learned more successfully trying to unbrick that phone than I ever would have had I not royally effed up....