Hello all,
The past day or so I have been attempting to install a fresh custom rom on my vzw tablet. I presently have a stock copy of DJ11 that is rooted installed.
When I put the device into download mode and connect to the computer, Heimdall (version 1.1.1) gives me the following error
Failed to access device. Error: -12
I have tried reinstalling the drivers, both off of the tablet and from the ZAdiag program included with Heimdall and the error persists. I have tried many different combinations of opening/closing heimdall/disconnecting and reconnecting the tablet while in download and out of download, and I have tried on two different PCs. Nothing seems to fix the problem.
I have seen another post on the forums about this particular issue, but the method of resolution that user was able to make work has not worked for me.
It seems to me that the tablet itself is to blame, like it is locking Heimdall out.
Basically at this point, any rom that requires use of Heimdall to install is not going to work. I do have CWM3 and the Verizon Bootstrapper installed, so if anyone has a link to a completely stock copy of the rom that comes in a zip, please link it as I would like to try that method of installing a new rom.
Thank you for any insight at all!!
Have you checked with odin to make sure the tablet is not connecting?
I had the same problem and pluged the device in another usb port, then hold power, volume down e home and after a while odin showed the yellow bar.
then disconnected it and put in another usb port, after that heimdall found it.
and to mention my tablet was dead, no screen no donwload mode, and not responding to button press. and still i was able to connect and ressurect it doing this.
Thanks for the good idea! When I connect it with Odin open, I get the yellow bar. I think that Heimdall is connecting as well, it just isn't being allowed to make any changes. Access denied is my suspicion. I'm not sure what would cause that, or how to correct it.
animaldito said:
Have you checked with odin to make sure the tablet is not connecting?
I had the same problem and pluged the device in another usb port, then hold power, volume down e home and after a while odin showed the yellow bar.
then disconnected it and put in another usb port, after that heimdall found it.
and to mention my tablet was dead, no screen no donwload mode, and not responding to button press. and still i was able to connect and ressurect it doing this.
Click to expand...
Click to collapse
I am pleased to report that I was able to find a solution. With Odin running, I was getting a yellow bar indicating the device was connected. I ran Heimdall while Odin was still open...and voila, it worked without a hitch.
Thanks again for the assistance. Keep this one tucked away in your memory in case you ever experience something similar!
You can also update the USB drivers through Heimdall like the instructions say.... Might be a safer way than to have ODIN open too...
You just need to downgrade the usb drivers after using Heimdall to use ODIN again...
ultramag69 said:
You can also update the USB drivers through Heimdall like the instructions say.... Might be a safer way than to have ODIN open too...
You just need to downgrade the usb drivers after using Heimdall to use ODIN again...
Click to expand...
Click to collapse
I had updated the drivers through Heimdall. Both in regular boot mode, and in download mode. Whatever caused the problem, it is seemingly fixed. I just hope it stays that way!
Related
Hi all, I have scoured the web for similar issues and can't find any answers
-Captivate I897 running 2.1 formerly mounted to my MAC just fine, rooted using Galaxy-S one click root. Root was successful, mostly just removed bloatware, etc.. but alas my phone is no longer recognized by the computer, although the phone recognizes that it is connected, when I click "mount" nothing happens on the computer's end.
-Appears to be a problem with the phone, I have tried Win7 w/ Kies mini and installed/reinstalled drivers, dev mode, etc...nada. And here's the kicker - these machines will recognize and mount my GF's unrooted Vibrant just fine.
-I have a separate micro SD card reader that can read the SD card out of the phone that way.
-So, I am hoping for some help to either
1 - fix the computer recognition issue, or
2- find steps to manually update to 2.2 or unroot, etc, any ideas that will get me running 2.2 and hopefully mount to Mac or PC, using files manually loaded to the SD and installed during recovery mode, this looks like flashing, would Andromeda or Cognition fix the connectivity issue?
Thanks in advance!!
If you're rooted and can get into download mode (power off+2 volume buttons+plug usb in) then you can use this link ----> http://www.megaupload.com/?d=QL6NX702 to flash stock 2.2 firmware. Note: This WILL break your root. Here's the thread on Odin One Click as well---->http://forum.xda-developers.com/showthread.php?t=731989. You probably want to read the information there before flashing to 2.2.
Good Luck!
Thanks for the suggestion, I've tried multiple drivers, but since my PC doesnt recognize my phone, both Odin or Superoneclick dont recognize my phone also.
I was able to manually unroot by copying the One Click Root Update.zip to my phone via Wifi File-sharing app. Unroot was successful, but still no connection to PC or Mac.
I'm stuck for now, It appears that any type of flashing requires a PC connection, unless there is some way to flash completely with Wifi-copied files and using the 'reinstall packages' option?
Well, if you have a dropbox, you could drag and drop a rom (say cognition) onto your phone's dropbox. Then you'd need to find a CWM recovery (make sure it's not 3.0) update.zip and reinstall packages. This will give you CWM recovery, from which you could install Cognition from your dropbox. No guarantees it will work, but it's worth a shot.
Can't help on the Mac and I only have a dim memory of 2.1, but what are your setting under Settings/Applications for USB settings and Development? Do you have USB debugging checked (on)? Do you have the Development settings set to something weird like Kies update?
My recommendation is to put USB debugging on (checked). In that case I think the USB settings choice is disabled and therefore ignored. Then when you connect to the computer you will get a message in the notification bar on your phone saying something like "select to copy files to/from the computer". Click that, then click the mount button. You should then be able to see the extra drives on your computer by looking under My Computer or whatever (on a PC). On mine they are F and G, no special indications that they are drives on an attached phone. I also do get an automatic pop-up for the new drives, like when you insert a USB stick, but I imagine that setting could be disabled so look for the drives manually.
If you can get a com port try to do a master clear with the phone plugged in and on the entire time, then do various methods of getting into download mode if you got a com port when the phone booted up, future references I would use Odin to flash speedmod kernel to get cwm and then flash a rom or leave it as is, when I first started rooting I used the same software and got the same problem
Try installing all the drivers beforehand just to make sure
Sent from my I897 using XDA App
do u have the drivers installed?
Mr.AdAbsurdum said:
If you can get a com port try to do a master clear with the phone plugged in and on the entire time, then do various methods of getting into download mode if you got a com port when the phone booted up, future references I would use Odin to flash speedmod kernel to get cwm and then flash a rom or leave it as is, when I first started rooting I used the same software and got the same problem
Try installing all the drivers beforehand just to make sure
Click to expand...
Click to collapse
+1
My wife's phone has the exact same issue as OP. Suggestions like above are useless unfortunately as the phone does not recognize that it is connected to a computer. Instead it acts as though it is connected to a charger. The oddest thing is that if I plug it in to a computer while the phone is turned off, the phone will turn on! However, still no recognition that it is connected to a PC.
Initially when I connected the phone the first time, Win7 said driver failed to install. Then my working cappy would not connect to Win7. I had to uninstall and reinstall the drivers and restart. My working cappy connected as it should, but my wife's phone from that point refused to recognize anything but charging.
Attempts to fix Via external SD: (1) I transferred Continuum 4.1 and reinstalled. Still not recognized. (2) Transferred my recovery images from January for stock, but just became stuck on boot screen for Continuum. I am uneasy about transferring the update-recovery.zip and download folder from original backup as I do not know whether it will screw up attempts to re-enter recovery if it does not work. (3) Attempted download mode, but only works via CWM 2 (not extended menu or three button or by inserting battery with odin up trick). Even when in DL mode odin does not recognize the COM port. (4) Attempted different orders for connecting to Odin in DL mode. By orders I mean rearranging the order I connect (i.e. open odin then connect cable then go to DL). (5) transferred andromeda3 and reinstalled, still same issue.
So, I am left thinking a hardware failure occurred at some point, so I will need to open it up and check connectors to solder it possibly.
Possible non-hardware solution is to restore to stock somehow WITHOUT Odin via CWM. Anyone know if this is possible or have a link to a flashable zip?
Thanks!
edit: I am on Win7 and always made sure USB debugging was checked. Also I tried to connect via One-Click Root for the heck of it and kies mini. No luck.
flashed without a cable
Thanks for the tip jomeister 15, I was able to flash new roms dropped over wifi with CWM recovery. This got me onto 2.2 which was the main purpose of this whole adventure. I just loaded Andromeda3 and it's pretty darn impressive.
My PC and Mac still do not recognise my phone, I troubleshot extensively like Snowake and nothing is recognized. I'm convinced its a hardware issue but who cares with wireless flashing and file transfer.
snowake said:
+1
My wife's phone has the exact same issue as OP. Suggestions like above are useless unfortunately as the phone does not recognize that it is connected to a computer. Instead it acts as though it is connected to a charger. The oddest thing is that if I plug it in to a computer while the phone is turned off, the phone will turn on! However, still no recognition that it is connected to a PC.
Initially when I connected the phone the first time, Win7 said driver failed to install. Then my working cappy would not connect to Win7. I had to uninstall and reinstall the drivers and restart. My working cappy connected as it should, but my wife's phone from that point refused to recognize anything but charging.
Attempts to fix Via external SD: (1) I transferred Continuum 4.1 and reinstalled. Still not recognized. (2) Transferred my recovery images from January for stock, but just became stuck on boot screen for Continuum. I am uneasy about transferring the update-recovery.zip and download folder from original backup as I do not know whether it will screw up attempts to re-enter recovery if it does not work. (3) Attempted download mode, but only works via CWM 2 (not extended menu or three button or by inserting battery with odin up trick). Even when in DL mode odin does not recognize the COM port. (4) Attempted different orders for connecting to Odin in DL mode. By orders I mean rearranging the order I connect (i.e. open odin then connect cable then go to DL). (5) transferred andromeda3 and reinstalled, still same issue.
So, I am left thinking a hardware failure occurred at some point, so I will need to open it up and check connectors to solder it possibly.
Possible non-hardware solution is to restore to stock somehow WITHOUT Odin via CWM. Anyone know if this is possible or have a link to a flashable zip?
Thanks!
edit: I am on Win7 and always made sure USB debugging was checked. Also I tried to connect via One-Click Root for the heck of it and kies mini. No luck.
Click to expand...
Click to collapse
You could try to send a ROM, kernel, and update.zip(CWM flash) and attempt to get another ROM over it. Format the system, wipe dalvik, I don't think its a hardware issue, I had the same problem first time I tried using 1 click rooting, I just waited patiently and got a com port after about two days, so that just leads me to believe some configuration file was corrupted during flash to stock, possibly flashing a ROM or reflashing the ROM you're on with a complete wipe of the system and user data and whatnot, or possibly just doing a backup up from cwm and immediately restore it, if its charging I highly doubt its hardware
Sent from my I897 using XDA App
i attempted to flash my captivate from stock 2.1 to fasty 2.2 with odin, I read through a bunch of different forums and i thought i had everything set up properly and then flashing afterwards when i attempted to boot up the phone it would flash the at&t screen like its going to turn on repeatedly. so the thing with the phone is that none of the button combinations work to get the emergency recovery or download mode so i was forced to make a jig. i made the jig and it work putting into download mode but the problem from here is i cant get it to connect to my pc, when i plug it in i get a "USB Device Not Recognized" message and neither odin or heimdall will recognize it. i do not think its the cord because the cord im using now has been the cord i was using beforeand my phone was always recognized while i was using it. i hope someone may have some insight for me on this problem or i will be losing the nicest phone ive ever had that i only got to use for a few short weeks, someone pleas help.
Heimdall drivers / Samsung drivers conflict with each other. Try removing the Heimdall drivers and reinstalling the Captivate drivers (don't forget to reboot ur computer). Then right click and run as administrator the Odin 1st. Then connect ur usb to the back of ur computer if u r on a desktop or 1st port if u r on a laptop. then connect ur phone in download mode and see if Odin recognizes it.
^ this
sent from a Semaphorized Mosaic Cappy
ok, i run 32 bit-xp (ancient technology i know) i go into the control panel and find SAMSUNG USB Drivers for mobile phones, and those are the only drivers i can find, if there are other drivers for my phone would i have to get rid of them another way? and if so where do i find them?
using my friends computer i have odin and the drivers, his computer recognizes my phone and it comes up on odin when i plug it in after using the jig to put it into dl mode but once i master clear nothing happens it says master clear started and it just sits there no progress bar on the phone nothing happens in odin.... please help
okeefj09 said:
using my friends computer i have odin and the drivers, his computer recognizes my phone and it comes up on odin when i plug it in after using the jig to put it into dl mode but once i master clear nothing happens it says master clear started and it just sits there no progress bar on the phone nothing happens in odin.... please help
Click to expand...
Click to collapse
I'd say that you shouldn't worry about doing master clear from Odin. If you can fully boot to whatever ROM you're using (even stock), there is an option in the settings menu to format your Internal SD card, which is the same thing as a master clear.
However, if you're just trying to flash stock, don't worry about the master clear at all. Just flash the stock rom and be on your way.
well the phone is completely bricked, before it was just repeatedly rebooting when i turned it on cause i failed to flash to the rom properly because im extremely new to the whole "phone modifying" thing and i was rushing which is not what your suppose to do cause these are very delicate processes, but now after plugging into the computer and attempting to master clear with odin when i turn it on i get the whole (cellphone Icon)..!..(computer icon) thing on my screen, i can still put it into dl mode from here with the jig i made but with my extreme noobness to this type of thing im not sure what to do still.. i dont want to mess up my phone any worse than i already have (if thats at all possible) and its just looking like i turned my phone into a paper weight at this point.
okeefj09 said:
well the phone is completely bricked, before it was just repeatedly rebooting when i turned it on cause i failed to flash to the rom properly because im extremely new to the whole "phone modifying" thing and i was rushing which is not what your suppose to do cause these are very delicate processes, but now after plugging into the computer and attempting to master clear with odin when i turn it on i get the whole (cellphone Icon)..!..(computer icon) thing on my screen, i can still put it into dl mode from here with the jig i made but with my extreme noobness to this type of thing im not sure what to do still.. i dont want to mess up my phone any worse than i already have (if thats at all possible) and its just looking like i turned my phone into a paper weight at this point.
Click to expand...
Click to collapse
Don't panic - the phone--/!\--pc screen will work the same way as download mode.
Just start up odin, let it settle, hook up you phone with that screen on, and see if Odin sees it. If it does, try the flash again.
If not, go through the steps in my "Captivate Connection Issues and Download Mode Help" post that's in my signature.
okeefj09 said:
well the phone is completely bricked, before it was just repeatedly rebooting when i turned it on cause i failed to flash to the rom properly because im extremely new to the whole "phone modifying" thing and i was rushing which is not what your suppose to do cause these are very delicate processes, but now after plugging into the computer and attempting to master clear with odin when i turn it on i get the whole (cellphone Icon)..!..(computer icon) thing on my screen, i can still put it into dl mode from here with the jig i made but with my extreme noobness to this type of thing im not sure what to do still.. i dont want to mess up my phone any worse than i already have (if thats at all possible) and its just looking like i turned my phone into a paper weight at this point.
Click to expand...
Click to collapse
You're not bricked. Master clear isn't going to fix your issue, and even if you wanted to run it, it only works with the phone booted which you obviously can't do. You're still all good.
1. Breathe.
2. Right click on Odin One Click and "Run as Administrator."
3. Put phone in download mode with your jig.
4. Plug the USB cord into the back of the computer (never a hub).
5. Wait for odin to recognize the phone (box turns yellow in Odin).
6. Wait a few more seconds to make sure nothing crashes.
7. Click start. Don't touch your phone, unplug it, run any other computer programs, or generally touch anything until the flash is complete. It will say "Done" and the phone will reboot.
okay i just want to flash back to stock if i can get it connected, if you can point me into the direction of the simplest way of doing this it would be greatly appreciated, i would love to learn how to do all of this fancy rom flashing stuff but bricking my phone is too much of a risk you know?
id prolly hug you if i met you in person, i was almost positive i was screwed.
THANKK YOUU so much
okeefj09 said:
THANKK YOUU so much
Click to expand...
Click to collapse
You're welcome, glad we could help
4-2ndtwin said:
Heimdall drivers / Samsung drivers conflict with each other. Try removing the Heimdall drivers and reinstalling the Captivate drivers (don't forget to reboot ur computer). Then right click and run as administrator the Odin 1st. Then connect ur usb to the back of ur computer if u r on a desktop or 1st port if u r on a laptop. then connect ur phone in download mode and see if Odin recognizes it.
Click to expand...
Click to collapse
That's bad advice. And you have obviously never tried it.
First. You don't remove heimdall drivers. You just use the closed source Samsung installer
Second. As an open source community, with an open source system like android, recommending using Odin over heimdall is just plain wrong. Without open source you wouldn't even have an android. Open source supports open source. No one should support closed source
Third, all that is required is to use another USB port. The open source libusb drivers were made right. Samsung drivers blow away the entire system. Libusb is only installed on a single USB port. The rest still work with Odin.
AdamOutler said:
That's bad advice. And you have obviously never tried it.
First. You don't remove heimdall drivers. You just use the closed source Samsung installer
Second. As an open source community, with an open source system like android, recommending using Odin over heimdall is just plain wrong. Without open source you wouldn't even have an android. Open source supports open source. No one should support closed source
Third, all that is required is to use another USB port. The open source libusb drivers were made right. Samsung drivers blow away the entire system. Libusb is only installed on a single USB port. The rest still work with Odin.
Click to expand...
Click to collapse
Didn't know until this post...http://forum.xda-developers.com/showpost.php?p=19998299&postcount=115 that it was possible to use Odin and Heimdall without removing one or the other drivers. This was never stated in the Heimdall Thread in the Captivate Android Development Forum or the Heimdall website or the Read Me, that I have seen.
And I have even admitted that I have not tried Heimdall. -- Here... http://forum.xda-developers.com/showpost.php?p=19995597&postcount=113
And I can only recommend what I know works. Odin is what I use and I have not had any problems occur that could not be resolved. And there are stated risks with both Odin and Heimdall. It is up to the individual user to choose which he uses and to understand that if they brick their phone, that is the risk that they were willing to take.
I use (support, if u must) Odin. I am not an "Ultra Open Source" guy as you appear to be (have u never used Odin?). I will keep using Odin and maybe one day give Heimdall a try, because I am not anti-Heimdall at all. Until then I will try to give the best advice I know to help others, just as I have received help from many.
If you're ultra-android, then you need to be ultra-open-source. Open Source development is what keeps our community alive. You have the right to request the source code for every ROM created on these forums because they are based on GPLV2 software.
Of course I've used Odin... I would never recommend it to anyone because it's not safe to use for a beginner. Heimdall One-Click has 6 points of safety over Odin.
Prove to me that Odin does what it's supposed to. Prove to me that Odin does not have a bot-net installed. Prove to me that Samsung can't just flip a switch and cause a brick on any given device when it's connected to Odin. Prove to me that any Odin One-Click is what it says it is without flashing it... You can prove all of these things with Heimdall.
Here's the source tree for Heimdall One-Click, One-Click UnBrick, and Heimdall One-Click Packager http://heimdall-one-click.googlecode.com/svn/trunk/ You can inspect the code for malicious content. On top of that, a finished One-Click is in an executable JAR format. This means it can be unzipped and each file can be inspected for malicious content and/or virus scanning.
Recommending Odin is not only against the moral fabric of this community, it's also risky. I don't know of a single brick that Heimdall One-Click has caused.... However people make a full-time job out of recovering bricks caused by Odin.
Here you go.. use this: http://forum.xda-developers.com/showthread.php?t=1266172 Choose if you want rooted or non-rooted.
So I have the i896 version of the Captivate, and I really want Cynagen Mod on it but I can't seem to get it to work. I was at the point where I Heimdal installer, it flashed it and rebooted and now I'm at the "Firmware Upgrade Fail ! Try using recovery mode" screen.
Here is where it gets interesting, the heimdal had me install new USB drivers which my computer no longer seems to recognize. I've tried reinstalling them and checking Odin to see if it detects my phone but nothing. Any suggestions?
--- UPDATE
I have downloaded the latest USB drivers onto my laptop, giving it a shot now.
--- UPDATE 2:
new drivers not working still.
that "Firmware Upgrade Fail ! Try using recovery mode" is actually download mode....if you are having connection problems then read this thread for all possible solutions...Connection Issues
If you want to use ODIN then install samsung drivers, if you want to use heimdall you use the drivers that it provides. That screen is probably Download mode just need to make sure you are using correct drivers.
If you install the zadig drivers (for Heimdall), it only installs then to one port. If you install then on port 3 now, they won't be on port 2. On my laptop, i have Samsung drivers in 1 port,zadig on another. Also if you install zadig on one port, you can't use Samsung drivers on that port again without reinstalling them.
I appreciate the help, for some reason the only way it would work was if I:
Removed the battery
Removed the USB cable
Held the Vol Up + Vol Down buttons
Insert USB Cable
Insert Battery, so now I am going to try to use the Odin again.
So this can't be good, now my phone boots and it has really faint diagonal dotted lines across the screen, and suggestions?
Sound like you need to flash to stock and start over.
mrhaley30705 said:
Sound like you need to flash to stock and start over.
Click to expand...
Click to collapse
Any suggestions on how to get it back to download mode to be able to do that? I'm using the jig and the technique listed above, still the dotted diagonals.
Apparently in some weird way the download screen got jacked, because Odin seems to be working on it, I will update when I get more info, thanks again for all of the help this far.
Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it
Odin and Heimdall both get stuck during the installation. Odin sits at file analysis, setup connection or initialization. Heamdall sits at shaking hands with Loke. After trying to use heimdall, odin won't recognize the phone.
Guster730 said:
Odin and Heimdall both get stuck during the installation. Odin sits at file analysis, setup connection or initialization. Heamdall sits at shaking hands with Loke. After trying to use heimdall, odin won't recognize the phone.
Click to expand...
Click to collapse
First of all, Odin and Heimdall use different drivers. Meaning, once you install the Heimdall drivers on a USB port, you can only use Heimdall with that USB port. You would have to install it on the others individually, but you don't want to since you need to use a different port for Odin.
Once you've established which port is which, read this thread http://forum.xda-developers.com/showthread.php?t=1351224
Well I figured out the drivers problem, so I can use either program, but still the same problem, that post doesn't really explain my problem. Both programs recognize my phone and I can start, but they just hang. I followed the directions in that post anyway, but still get the same issue. I've soft bricked before and used odin I believe 3 times and never had this issue.
Make sure you have a good cable and use a port directly on the motherboard.
After trying many different ports one of them finally worked.