[Q] JIG worked now the computer wont recognize the device - Captivate Q&A, Help & Troubleshooting

i attempted to flash my captivate from stock 2.1 to fasty 2.2 with odin, I read through a bunch of different forums and i thought i had everything set up properly and then flashing afterwards when i attempted to boot up the phone it would flash the at&t screen like its going to turn on repeatedly. so the thing with the phone is that none of the button combinations work to get the emergency recovery or download mode so i was forced to make a jig. i made the jig and it work putting into download mode but the problem from here is i cant get it to connect to my pc, when i plug it in i get a "USB Device Not Recognized" message and neither odin or heimdall will recognize it. i do not think its the cord because the cord im using now has been the cord i was using beforeand my phone was always recognized while i was using it. i hope someone may have some insight for me on this problem or i will be losing the nicest phone ive ever had that i only got to use for a few short weeks, someone pleas help.

Heimdall drivers / Samsung drivers conflict with each other. Try removing the Heimdall drivers and reinstalling the Captivate drivers (don't forget to reboot ur computer). Then right click and run as administrator the Odin 1st. Then connect ur usb to the back of ur computer if u r on a desktop or 1st port if u r on a laptop. then connect ur phone in download mode and see if Odin recognizes it.

^ this
sent from a Semaphorized Mosaic Cappy

ok, i run 32 bit-xp (ancient technology i know) i go into the control panel and find SAMSUNG USB Drivers for mobile phones, and those are the only drivers i can find, if there are other drivers for my phone would i have to get rid of them another way? and if so where do i find them?

using my friends computer i have odin and the drivers, his computer recognizes my phone and it comes up on odin when i plug it in after using the jig to put it into dl mode but once i master clear nothing happens it says master clear started and it just sits there no progress bar on the phone nothing happens in odin.... please help

okeefj09 said:
using my friends computer i have odin and the drivers, his computer recognizes my phone and it comes up on odin when i plug it in after using the jig to put it into dl mode but once i master clear nothing happens it says master clear started and it just sits there no progress bar on the phone nothing happens in odin.... please help
Click to expand...
Click to collapse
I'd say that you shouldn't worry about doing master clear from Odin. If you can fully boot to whatever ROM you're using (even stock), there is an option in the settings menu to format your Internal SD card, which is the same thing as a master clear.
However, if you're just trying to flash stock, don't worry about the master clear at all. Just flash the stock rom and be on your way.

well the phone is completely bricked, before it was just repeatedly rebooting when i turned it on cause i failed to flash to the rom properly because im extremely new to the whole "phone modifying" thing and i was rushing which is not what your suppose to do cause these are very delicate processes, but now after plugging into the computer and attempting to master clear with odin when i turn it on i get the whole (cellphone Icon)..!..(computer icon) thing on my screen, i can still put it into dl mode from here with the jig i made but with my extreme noobness to this type of thing im not sure what to do still.. i dont want to mess up my phone any worse than i already have (if thats at all possible) and its just looking like i turned my phone into a paper weight at this point.

okeefj09 said:
well the phone is completely bricked, before it was just repeatedly rebooting when i turned it on cause i failed to flash to the rom properly because im extremely new to the whole "phone modifying" thing and i was rushing which is not what your suppose to do cause these are very delicate processes, but now after plugging into the computer and attempting to master clear with odin when i turn it on i get the whole (cellphone Icon)..!..(computer icon) thing on my screen, i can still put it into dl mode from here with the jig i made but with my extreme noobness to this type of thing im not sure what to do still.. i dont want to mess up my phone any worse than i already have (if thats at all possible) and its just looking like i turned my phone into a paper weight at this point.
Click to expand...
Click to collapse
Don't panic - the phone--/!\--pc screen will work the same way as download mode.
Just start up odin, let it settle, hook up you phone with that screen on, and see if Odin sees it. If it does, try the flash again.
If not, go through the steps in my "Captivate Connection Issues and Download Mode Help" post that's in my signature.

okeefj09 said:
well the phone is completely bricked, before it was just repeatedly rebooting when i turned it on cause i failed to flash to the rom properly because im extremely new to the whole "phone modifying" thing and i was rushing which is not what your suppose to do cause these are very delicate processes, but now after plugging into the computer and attempting to master clear with odin when i turn it on i get the whole (cellphone Icon)..!..(computer icon) thing on my screen, i can still put it into dl mode from here with the jig i made but with my extreme noobness to this type of thing im not sure what to do still.. i dont want to mess up my phone any worse than i already have (if thats at all possible) and its just looking like i turned my phone into a paper weight at this point.
Click to expand...
Click to collapse
You're not bricked. Master clear isn't going to fix your issue, and even if you wanted to run it, it only works with the phone booted which you obviously can't do. You're still all good.
1. Breathe.
2. Right click on Odin One Click and "Run as Administrator."
3. Put phone in download mode with your jig.
4. Plug the USB cord into the back of the computer (never a hub).
5. Wait for odin to recognize the phone (box turns yellow in Odin).
6. Wait a few more seconds to make sure nothing crashes.
7. Click start. Don't touch your phone, unplug it, run any other computer programs, or generally touch anything until the flash is complete. It will say "Done" and the phone will reboot.

okay i just want to flash back to stock if i can get it connected, if you can point me into the direction of the simplest way of doing this it would be greatly appreciated, i would love to learn how to do all of this fancy rom flashing stuff but bricking my phone is too much of a risk you know?

id prolly hug you if i met you in person, i was almost positive i was screwed.

THANKK YOUU so much

okeefj09 said:
THANKK YOUU so much
Click to expand...
Click to collapse
You're welcome, glad we could help

4-2ndtwin said:
Heimdall drivers / Samsung drivers conflict with each other. Try removing the Heimdall drivers and reinstalling the Captivate drivers (don't forget to reboot ur computer). Then right click and run as administrator the Odin 1st. Then connect ur usb to the back of ur computer if u r on a desktop or 1st port if u r on a laptop. then connect ur phone in download mode and see if Odin recognizes it.
Click to expand...
Click to collapse
That's bad advice. And you have obviously never tried it.
First. You don't remove heimdall drivers. You just use the closed source Samsung installer
Second. As an open source community, with an open source system like android, recommending using Odin over heimdall is just plain wrong. Without open source you wouldn't even have an android. Open source supports open source. No one should support closed source
Third, all that is required is to use another USB port. The open source libusb drivers were made right. Samsung drivers blow away the entire system. Libusb is only installed on a single USB port. The rest still work with Odin.

AdamOutler said:
That's bad advice. And you have obviously never tried it.
First. You don't remove heimdall drivers. You just use the closed source Samsung installer
Second. As an open source community, with an open source system like android, recommending using Odin over heimdall is just plain wrong. Without open source you wouldn't even have an android. Open source supports open source. No one should support closed source
Third, all that is required is to use another USB port. The open source libusb drivers were made right. Samsung drivers blow away the entire system. Libusb is only installed on a single USB port. The rest still work with Odin.
Click to expand...
Click to collapse
Didn't know until this post...http://forum.xda-developers.com/showpost.php?p=19998299&postcount=115 that it was possible to use Odin and Heimdall without removing one or the other drivers. This was never stated in the Heimdall Thread in the Captivate Android Development Forum or the Heimdall website or the Read Me, that I have seen.
And I have even admitted that I have not tried Heimdall. -- Here... http://forum.xda-developers.com/showpost.php?p=19995597&postcount=113
And I can only recommend what I know works. Odin is what I use and I have not had any problems occur that could not be resolved. And there are stated risks with both Odin and Heimdall. It is up to the individual user to choose which he uses and to understand that if they brick their phone, that is the risk that they were willing to take.
I use (support, if u must) Odin. I am not an "Ultra Open Source" guy as you appear to be (have u never used Odin?). I will keep using Odin and maybe one day give Heimdall a try, because I am not anti-Heimdall at all. Until then I will try to give the best advice I know to help others, just as I have received help from many.

If you're ultra-android, then you need to be ultra-open-source. Open Source development is what keeps our community alive. You have the right to request the source code for every ROM created on these forums because they are based on GPLV2 software.
Of course I've used Odin... I would never recommend it to anyone because it's not safe to use for a beginner. Heimdall One-Click has 6 points of safety over Odin.
Prove to me that Odin does what it's supposed to. Prove to me that Odin does not have a bot-net installed. Prove to me that Samsung can't just flip a switch and cause a brick on any given device when it's connected to Odin. Prove to me that any Odin One-Click is what it says it is without flashing it... You can prove all of these things with Heimdall.
Here's the source tree for Heimdall One-Click, One-Click UnBrick, and Heimdall One-Click Packager http://heimdall-one-click.googlecode.com/svn/trunk/ You can inspect the code for malicious content. On top of that, a finished One-Click is in an executable JAR format. This means it can be unzipped and each file can be inspected for malicious content and/or virus scanning.
Recommending Odin is not only against the moral fabric of this community, it's also risky. I don't know of a single brick that Heimdall One-Click has caused.... However people make a full-time job out of recovering bricks caused by Odin.
Here you go.. use this: http://forum.xda-developers.com/showthread.php?t=1266172 Choose if you want rooted or non-rooted.

Related

Need Odin3 1 click/stuck on boot screen

So I flashed my phone to Phoenix and was going wonderfully. Flew into St. Louis from Oklahoma and the phone froze up. It's now stuck on the AT&T boot screen. Occassionally after doing a battery pull and turning it on, the Phoenix boot screen will come up and I've gotten it to the lock/unlock screen but is unresponsive to touch.
Occassionally it even has what almost looks like colorful static on the screen. So now I'm in a completely different state without my home laptop for a week with the Odin3 1 click and am unable to find a download link for it.
Help would be appreciated. I was hoping to get the phone into recovery to try and flash back to stock or reflash Phoenix but it just stays stuck on the AT&T boot screen now.
remove battery, put battery back in, hold up+down vol buttons, plug in usb.
you'll be at download mode, then use odin.
Chillyw said:
remove battery, put battery back in, hold up+down vol buttons, plug in usb.
you'll be at download mode, then use odin.
Click to expand...
Click to collapse
Do you have an Odin download link? The Odin link on the site isn't good anymore and google isn't helping
here's an alternative link I've used:
http://www.mediafire.com/?0w2y31maz8mdom4
I appreciate the help so far and the Odin link. I managed to get Odin downloaded. I managed to get my phone in download mode. However, Odin is not registering that there is any phone. Normally I'd see a COM but nothing is showing up.
I started by running Odin.
Then got my phone in download mode.
I can't get any farther.
Do you have the drivers installed on your PC ? I also read somewhere where you have to have the latest net frame work as well...If you do...you might have a bad usb cord...and here in St.Louis..there are a lot of AT&T stores you can get one..
Mac
Well, on the original thread that had the link for Odin has the 32/64 Samsung drivers. I downloaded the drivers zip file to the desktop of the laptop.
One thing I find strange is usually when I plug in the phone to my laptop with the USB cable, the option to view files, etc pops up. It is not on this laptop.
kiltedthrower said:
Well, on the original thread that had the link for Odin has the 32/64 Samsung drivers. I downloaded the drivers zip file to the desktop of the laptop.
One thing I find strange is usually when I plug in the phone to my laptop with the USB cable, the option to view files, etc pops up. It is not on this laptop.
Click to expand...
Click to collapse
Did you install the drivers then ? Sometimes my wife's Samsung laptop does that..and not install anything going to the desktop..If everything is loaded correctly..you 2 drive pop up windows should open..
Also (I'm sure it is) make sure usb debugging is checked on your phone..
Sometimes the most simplest things keeps things from working correctly..
Phone unplugged..in normal mode..usb debugging checked..do not mount phone..
Close Odin
Open Odin
Plug phone in
Put phone into download mode...click start...not master clear...
Mac
Odin is also finnicky about USB ports. If you are on a desktop machine, try using one in the back instead of the front, or if you have multiple sets, try using a different one. I've had Odin not recognize certain USB ports but recognize others before.
Finally, I suspect you already know this, but for sanity's sake make sure you start both the PC and phone up fresh after reboots, open Odin, then connect the phone. Connecting the phone first breaks Odin.
Mac11700 said:
Did you install the drivers then ? Sometimes my wife's Samsung laptop does that..and not install anything going to the desktop..If everything is loaded correctly..you 2 drive pop up windows should open..
Also (I'm sure it is) make sure usb debugging is checked on your phone..
Sometimes the most simplest things keeps things from working correctly..
Phone unplugged..in normal mode..usb debugging checked..do not mount phone..
Close Odin
Open Odin
Plug phone in
Put phone into download mode...click start...not master clear...
Mac
Click to expand...
Click to collapse
Plug the phone in after it is in download mode, otherwise odin might not see it.
Sent from my SGH-I897 using XDA App
skatcat31 said:
Plug the phone in after it is in download mode, otherwise odin might not see it.
Sent from my SGH-I897 using XDA App
Click to expand...
Click to collapse
I know...but I have had to do it this way on a couple of times..and let it go into download when it was hooked up already..It's strange..but it worked at that time..after getting the drivers loaded for the first time on the wifes laptop..
Mac
What OS are you running? Are you explicitly starting odin in administrator mode (right-click->run as administrator)?
Okay, so I switched USB ports and it suddenly recognized and it started to download drivers. But it was listed as a gadget Serial and no drivers found. Geez this would be so much easier if I was at home where the laptop is set up with everything instead of being several states away.
Okay, so apparently I do not have the correct drivers installed. I really appreciate all the help so far. At this point, should I just google Samsung Captivate drivers or does someone have a link handy?
I can't get to my debugging as the phone stays on teh AT&T boot screen. I did have it enabled before I left OKC though.
I've gotten teh Samsung modem software successfully installed.
opcow said:
What OS are you running? Are you explicitly starting odin in administrator mode (right-click->run as administrator)?
Click to expand...
Click to collapse
Phoenix 3.0 which is 2.2
The Odin is a zipfile that I have to use winzip to use it. It doesn't have the option to use as an administrator.
kiltedthrower said:
Phoenix 3.0 which is 2.2
The Odin is a zipfile that I have to use winzip to use it. It doesn't have the option to use as an administrator.
Click to expand...
Click to collapse
OS as in, what OS is your DESKTOP/LAPTOP running?
and....you need to EXTRACT Odin from the zip file, and run it as administrator
kiltedthrower said:
Phoenix 3.0 which is 2.2
The Odin is a zipfile that I have to use winzip to use it. It doesn't have the option to use as an administrator.
Click to expand...
Click to collapse
O_O You blew my mind.
Windows 7 is the OS and I finally got Odin extracted and running as administrator
opcow said:
O_O You blew my mind.
Click to expand...
Click to collapse
I know. Flying from OKC to St. Louis and then from St. Louis to Baltimore with a several hour layover has me exhausted and not thinking clearly.
I did manage to reboot it and Phoenix came up. All drivers were showing ready except for ADB and then the phone shut down and ADB said phone was unplugged.
I feel like I'm making headway but just not there.
And why is it I'm staying in an expensive hotel and you still have to pay for net? Geez
I downloaded the 64bit drivers. Ran the exe file.
Extracted Odin and have run it as an administrator
Put the phone in download mode.
Odin is still not seeing anything.
NM....pop up box just said taht device driver software not successfully installed. I think I'm going to hit my head against the wall for a bit.

Phone Stucked At "At&t World Phone Screen"

I have Cognition V4.5.3
Im A Noob At This... Tried Ti Flash A Kernel With [APP] SGS Kernel FLasher
When I Rebooted My Phone Its Just Stuck At The Boot Screen...
Does Not Want To Go In Recovery Mode... Just Download Mode....
But Heimdall Does Not Recognize My Device...
What Can I Do? I Need To Get My Phone Back, Since Its A Gift
Thanks...
and i only have a mac... =/
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Try Odin 1 Click. You'll find it on here somewhere. It wil take you back to stock 2.1 Eclair. Then you can READ ABOUT flashing other ROMs and proceed from there.
bertito2580 said:
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Click to expand...
Click to collapse
im sorry but most of us can't even help you IF we want to The users of windows based PC's are greater in this forums compared to Macs. if there is drivers for mac, are they installed?
Since you only have a Mac, I would suggest installing Windows through Boot-Camp (included in Mac OSX) on a different partition. I read Galaxy S doesn't have drivers support for Mac OSX Leopart or later, not entirely sure if its true though, but I do have a MacBook Pro and had no success in finding a way to connect my phone to it by USB... Good thing I had a regular old Windows PC Desktop.
Then as Jack Man said, use Odin 1-Click found here
http://forum.xda-developers.com/showthread.php?t=731989
to reset your phone completely to factory settings, relatively simple to do as long as you read the instructions on that post. =)
Well since you only have a Mac and hiemidal is not see your phone i think your only option is to find a friend with a PC and give the Odin 1 click a try.
i ask my aunt for her pc,
Windows Vista 32-Bit
Downloaded And Installed The Drivers
Using Odin3 One-Click
I Put My Phone On Download Mode With The 3keyCombo
And The PC Says"USB Device Not Recognized"
Im Just Gettind Pissed And Stressed
It's My Only Phone.
What Can I Do To Fix This?
Also Tried Running Odin As Administrator... And NOthing...
bertito2580 said:
Also Tried Running Odin As Administrator... And NOthing...
Click to expand...
Click to collapse
Sir, just in case, did you reboot after installing drivers and BEFORE you tried connecting the device? Also, did you check if Odin detected your device when its connected in Download mode?
yes, and thats what in trying to do, to get odin to detect my phone in download mode...
Ok, is your phone detected by the operating system? If it does, then try using this other Odin thread instead, this one however will restore it to Stock Samsung Galaxy with 2.3 Gingerbread.
http://forum.xda-developers.com/showthread.php?t=1127249
Don't have to follow the rest of the instructions to root it just in case, but see if that version of Odin detects your phone.
actually thats the problem... windows vista doesnt recognize my device, either my mac... is there a solution to my phone or not? please help
OMG please help ((
I've Installed Captivate Drivers
Also
Galaxy S General Drivers
But When I Put My Captivate On Download MOde It Just Says
"USB Device Not Recognized"
One of the devices attached to this computer has malfunctioned and
Windows does not recognize it.
Are you sure it goes in to Download Mode (little android with a shovel)? Also have u tried different usb ports?
Like the above said, are you sure you are in download mode?
What USB port are you using if ots a desktop computer. There are known issues using front usb, plug into the usb on the back of the tower.
Also, are you sure odin doesnt see it? I know windows doesnt like it, but start odin, put phone in download mode, connect to pc. What does odin show? Any connected devices?
Sent from my GT-I9000 using XDA App
yes, im sure its on download mode and tried all the ports...
Im gonna try on another pc
to see if its the pc

[Resolved] Can't access device via Heimdall

Hello all,
The past day or so I have been attempting to install a fresh custom rom on my vzw tablet. I presently have a stock copy of DJ11 that is rooted installed.
When I put the device into download mode and connect to the computer, Heimdall (version 1.1.1) gives me the following error
Failed to access device. Error: -12
I have tried reinstalling the drivers, both off of the tablet and from the ZAdiag program included with Heimdall and the error persists. I have tried many different combinations of opening/closing heimdall/disconnecting and reconnecting the tablet while in download and out of download, and I have tried on two different PCs. Nothing seems to fix the problem.
I have seen another post on the forums about this particular issue, but the method of resolution that user was able to make work has not worked for me.
It seems to me that the tablet itself is to blame, like it is locking Heimdall out.
Basically at this point, any rom that requires use of Heimdall to install is not going to work. I do have CWM3 and the Verizon Bootstrapper installed, so if anyone has a link to a completely stock copy of the rom that comes in a zip, please link it as I would like to try that method of installing a new rom.
Thank you for any insight at all!!
Have you checked with odin to make sure the tablet is not connecting?
I had the same problem and pluged the device in another usb port, then hold power, volume down e home and after a while odin showed the yellow bar.
then disconnected it and put in another usb port, after that heimdall found it.
and to mention my tablet was dead, no screen no donwload mode, and not responding to button press. and still i was able to connect and ressurect it doing this.
Thanks for the good idea! When I connect it with Odin open, I get the yellow bar. I think that Heimdall is connecting as well, it just isn't being allowed to make any changes. Access denied is my suspicion. I'm not sure what would cause that, or how to correct it.
animaldito said:
Have you checked with odin to make sure the tablet is not connecting?
I had the same problem and pluged the device in another usb port, then hold power, volume down e home and after a while odin showed the yellow bar.
then disconnected it and put in another usb port, after that heimdall found it.
and to mention my tablet was dead, no screen no donwload mode, and not responding to button press. and still i was able to connect and ressurect it doing this.
Click to expand...
Click to collapse
I am pleased to report that I was able to find a solution. With Odin running, I was getting a yellow bar indicating the device was connected. I ran Heimdall while Odin was still open...and voila, it worked without a hitch.
Thanks again for the assistance. Keep this one tucked away in your memory in case you ever experience something similar!
You can also update the USB drivers through Heimdall like the instructions say.... Might be a safer way than to have ODIN open too...
You just need to downgrade the usb drivers after using Heimdall to use ODIN again...
ultramag69 said:
You can also update the USB drivers through Heimdall like the instructions say.... Might be a safer way than to have ODIN open too...
You just need to downgrade the usb drivers after using Heimdall to use ODIN again...
Click to expand...
Click to collapse
I had updated the drivers through Heimdall. Both in regular boot mode, and in download mode. Whatever caused the problem, it is seemingly fixed. I just hope it stays that way!

[Q] clockwork mod installed but formatted everything stuck no update.zip help plz

I looked through other similiar threads but they are for other phones so i wanted to start this thread to get unstuck with my samsung i897 with clockwork mod installed. I guess im good at learning things the hard way so here i am stuck at the mercy of you guys. this is what i figure i can do to get the update.zip i can put my sd card in a sd card reader then hook it up to my pc then manually copy update.zip to it to get access through the clockwork mod bios then point it to the freshly copied file but the prob is i dont have a usb sd card reader and i have ignorantly formatted everything on my phone so i can boot up only to the clockwork mod bios with nothing for it to work with so can any of you give me a laymens term step by step noobie style walkthru out of the kindness of your heart or pure boredom? thanks and i figue almost bricking my phone is a good way to learn this stuff So am i stuck having to get a sd card reader for my pc then download the update.zip or if there are alternatives to update.zip then id like to know but is this the only way to get me out of this situation of just having the clockwork bios and nothing else? if someone has a quickfix please let me know or point me to some solution please
Flash back to stock with ODIN that will fix your phone.... Why would u format?
Cuz i like to jump the gun before thinking alot of times thats why i learn the hard way most of the time it builds character also i learn stuff that i never wanted to learn but it helps me in the long run.
Carefull jumping the gun will land you with a hardbrick...
Ok I tried the [STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE ONLY
thread located at http://forum.xda-developers.com/showthread.php?t=731989 and i did it step by step with the mentioned drivers installed and i cant get oden to reconize my phone im in download mode followed the directions to a t with nothin :/ do you have any other ideas?
Is your phone running CyanogenMod or MIUI?
its running the \update-cm-7.1.0-Captivate-signed.zip or it says this when it boots into the custom bios clockwork mod recovery v2.5.1.0 speedmod ulfk and the bios text is in green with the reboot system now options - apply sdcard:update.zip and -wipe data/factory reset and - wipe cach partition and install zip from sdcard and - backup and restore and - mounsts and storage and advanced clockworkmod feautures and - advanced speedmod ulk features and- ********go back******* etc and their subdirectories but thats all i can get because i guess thats all left on my phone . i can get the com recognition when i boot up to recovery mode but not when i boot into download mode which is what i need to be in obviously because i cant get odin to run all the way through in recovery mode it sticks and freezes and this is what i get <ID:0/005> Added!!
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
Then you need Nexus S drivers. I recommend you also download android SDK while your at it. FYI any AOSP (CyanogenMod, MIUI, etc) use Nexus S drivers.
Ok im trying to reinstall my driver for windows 7 nexus driver u mentioned btw my device is listed as gadget serial under devices and printers ok ive chosen 16_Shrewsbury and trying to update the gadget serial to the shrewsbury driver i keep getting select device - the folder you specified doesnt contain a compatible software driver for your device. if the folder contains a driver, make sure it is designed to work with windows for 32-bit systems and just to let you know the driver file name i downloaded is samsung_driver the one i was using before was SAMSUNG_USB_Driver_for_Mobile_Phones_x86 so it seems i have a tricky aggravating device driver problem that is what makes all this hard in the first place trying to find needle in the haystack drivers when they should be outlined correctly instead of this. but anyway im hanging int their because i have a brick with nothing else so far. thanks agian for your patience in joining in my aggravatiion.
I really can't say. I just use SDK for that. =/ I've never installed any nexus S drivers, but I assume you can grab legit drivers from nexus site.
This is what im going to try now, im going to unistall and try to seek out all the drivers and do away with them i wish there was a samsung driver eliminator program so i can go through the trial and error correct driver thing which i shouldnt be going through because i had the correct drivers before enough to root my phone in the first place this is just crazy but i consistently run across these driver issues when dealing with windows so i should just accept this i how it is and keep plugging at it till i finally have a phone again well if anyone has a miracle answer for me then feel free to relieve my anxiety and bless me with just 1 time a simple fix lol. I guess if this was simple in the first place everyone would be doing it.
When i ran MIUI, the only time i had a driver problem was with adb. Rest if the t time, Samsung drivers worked fine. You could always use heimdall, on Ubuntu (google wubi installer)
im still stuck trying to get odin3 to reconize my device in download mode so i can one click fix my phone back to factory default , the trouble im facing is that i cant seem to get the correct driver ive tried so many different ones and im fighting windows 7 because it keeps putting i9000 or nexus drivers in automaticallly when i unplug the usb and reinsert in to initiate download mode. like i said in an earlier post i wish i had a proggie that could seek out the device drivers and annihilate them so i could start from scractch as yet im trying to find them myself manually and do away with them with not much luck.
Soft Brick Fix - Samsung Captivate
Another "Jump the gunner". That's me in a nutshell.
Here are the steps you will need to take in order to un-brick your phone.
(I have done this so many times, but I have never written a tutorial)
First off, it sounds like you have the wrong drivers installed for your phone. Most computers have more than one use port, and it will attempt to install the driver for the phone for every different port you plug it into. But lets fix the one that you have that's messed up already.
-With your phone in download mode, plug it into the USB port.
-Open control panel, system, then click on device manager in the left column of the window.
-At the bottom of the list you will see "Universal Serial Bus Controllers"
-Expand this list.
-Find the device that is supposed to be resembling your phone. If you don't know the name, you may be able to check by the windows clock for the green circle with the check mark in it, clicking this will tell you what "Ejectable" USB devices are connected.
-Right click the matching device name in the Device manager screen and then click uninstall.
------------------------------------------------------------------------
-Download the correct drivers:
Samsung USB Drivers
(go here, click software, USB driver should be first listing)
-Install the driver from where you downloaded it to.
-Plug in your phone while in download mode.
-Verify that the correct driver has been installed.
------------------------------------------------------------------------
-Open your phone and remove the battery.
-Replace the battery and battery cover.
-Open any Odin one click from this thread (Recommend one with Gingerbread bootloaders)...
Odin One Clicks
-Boot phone into download mode
-Plug phone into USB (After Odin is open)
-When you see the yellow COM port lit up, flash.
That should do it!
followed your advice and im still stuck with every device driver i try it either says will not reconzie my device or that device cannot start etc. i refuse to give up so if you guys are on this journey with me thats kewl. ok instead of manually trying to install the driver i goto setup now and when i run it i get this message
Install driver - SAMSUNG Android USB Modem Software was not installed successfully (16) There is a driver installed for the device, please uninstall first.
So now im in device manager trying to find the correct driver to uninstall since its not listed under usb devices it only comes up as gadget serial under other devices. Im trying to get rid of the drivers but i seem to be stuck in a loop . i found this link http://www.techrepublic.com/blog/window-on-windows/get-rid-of-old-device-drivers-hidden-in-vista/867 so im trying the advice here and seeing if i can remove the device and add the right one man i should just reformat my hd and put in linux or unix or any os besides windows then id probably be ok.
You don't have to reformat to do Linux. It will run via a live usb drive or a side-by-side installation.
ok i used the advice from http://www.techrepublic.com/blog/window-on-windows/get-rid-of-old-device-drivers-hidden-in-vista/867 and showed hidden devices and removed all samsung drivers or anything remotely resembling samsung usb drivers including the gadget serial device and then reinstalled the supposedly correct drivers for my i897 atnt captivate or craptivate and it installed but gives me this error gadget serial control failed so now i suppose i have to find a driver that doesnt exist for a device that isnt correctly being identified by win 7 as a samsung galaxy s sgh-i897 antnt captivate. or does anyone know of a gadget serial control driver that will work so that odin3 will reconize my device so i can get some semblance of a cellphone back? no im trying the advice from http://forum.xda-developers.com/showthread.php?t=1355666 with the title [SOLVED] Gadget Serial Issue - No Flash my problem is i have the same prob but require a flash.
Have you given heimdall a try? It uses different drivers than Odin.
I didnt have to use heimdal odin3 finally reconized my phone after following my previous post option and installing previous set of drivers for my phone not the newest seems u can save a brick after all but pain in the rear but now ive learned so im
ready to hack my phone to death lol btw if anyone else has this prob feel free to ask me fer help lol and thank you very much for all the help in this wonderful forum top notch support guys with this kind of diligence there is nothing u guys cant do )
Good Luck

[Q] odin will not detect my phone

i have windows 7 and a samsung captivaye flashed with heimdall 2.3.4 gingerbread. i want to flash 2.3.5 with clockwork mod and can only find one that comes with a odin one click. my problem is the comuter recognizes the phone heimdall does too but no version of odin will. any ideas on how to get odin to see my phone. and yes im in download mode
my computer is running windows 7 and i have a samsung captivate. my computer recognizes my phone, hemdall recognizes my phone but no version of Odin will. i am running 2.3.4 gingerbread flashed with heimdall but i want to flash it with 2.3.5 with clockwork mod which the only version i could find came in a odin one click package. any ideas on how to get odin to recognize my phone???
and yes i ran odin as admin still no go
Reinstall your drivers. After installing the Heimdall driver, your driver that you need for Odin is borked.
i have reinstalled the phone drivers many times. i eaven downloaded them from samsung and tried that that. when i plug my phone in the computer will say installing drivers then it says completed. i restarted computer right click odin run as admin but nothing shows up in the com box..
Look here
http://forum.xda-developers.com/showthread.php?t=1351224
For more help
can i unplug the phones usb cable from the pc while it is in download mode? i do not want to brick the phone
also is there a way to get out of download mode with out flashing the rom
got it. i let kies mini install drivers for phone then once kies mini found the phone so to did odin
oh and just help someone else who may be having these issues. yes you can unplug the phone as long as its not already flashing a rom. never unplug if already in the middle of flashing or you will brick the phone. to get out of download mode if you are not in the middle of a flash. if you find yourself like me and have put the phone in download mode and odin or whatever you are using will not recognize it or maybe you forgot to check usb debugging then unplug phone from computer remove battery for a few seconds and the phone should boot normally. tahnks guys for all the help i really appreciate it
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
rekamyenom said:
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
Click to expand...
Click to collapse
Are you using the cable that came with the phone?
Have you tried a different cable?
Do you have Debugging Mode turned on?
You might want to post in the S4 Active Q&A forum.: http://forum.xda-developers.com/galaxy-s4-active/help
dawgdoc said:
Are you using the cable that came with the phone?
Have you tried a different cable?
Do you have Debugging Mode turned on?
You might want to post in the S4 Active Q&A forum.: http://forum.xda-developers.com/galaxy-s4-active/help
Click to expand...
Click to collapse
Yes & yes
rekamyenom said:
Yes & yes
Click to expand...
Click to collapse
If you connect your phone to the PC and then go to the computer's Device Manager, is it recognizing the phone correctly? Or are you getting the yellow exclamation point over the icon?
I use Heimdall when doing Odin tasks. It is an Open Source equivalent to Odin available for Windows, Mac, and Linux. I'm not too familiar with Windows problems because I have been on Linux for the past 7 years. I have only used Windows in those years for updates to a Captivate that only worked through Kies, and rooting an Acer tablet with a Windows only tool.
dawgdoc said:
If you connect your phone to the PC and then go to the computer's Device Manager, is it recognizing the phone correctly? Or are you getting the yellow exclamation point over the icon?
I use Heimdall when doing Odin tasks. It is an Open Source equivalent to Odin available for Windows, Mac, and Linux. I'm not too familiar with Windows problems because I have been on Linux for the past 7 years. I have only used Windows in those years for updates to a Captivate that only worked through Kies, and rooting an Acer tablet with a Windows only tool.
Click to expand...
Click to collapse
I get nothing when I connect the phone to the PC in download mode, but I get full communication when not in download mode. I have never tried Hemidall
I have seen some suggestions to try a different USB port, I expect you already have.
Other thoughts:
What version of Odin are you using?
Have you tried Kies?
Is your phone stock or modified?
dawgdoc said:
I have seen some suggestions to try a different USB port, I expect you already have.
Other thoughts:
What version of Odin are you using?
Have you tried Kies?
Is your phone stock or modified?
Click to expand...
Click to collapse
I have tried numerous computers, numerous cables, numerous USB ports, I have tried every version of Odin known to mankind, I have tried with kies, without kies, and my phone is completely stock, not modified whatsoever, this one has me stumped. I have used odin on no less than 1000 phones never have I had a phone not react to Odin. the phone reacts 100% of the time to anything but Odin, I am wondering if Samsung has released a security update that is preventing communication with Odin
rekamyenom said:
I have tried numerous computers, numerous cables, numerous USB ports, I have tried every version of Odin known to mankind, I have tried with kies, without kies, and my phone is completely stock, not modified whatsoever, this one has me stumped. I have used odin on no less than 1000 phones never have I had a phone not react to Odin. the phone reacts 100% of the time to anything but Odin, I am wondering if Samsung has released a security update that is preventing communication with Odin
Click to expand...
Click to collapse
I'm at a loss, a quick search using the terms odin, download, and something else did not yield useful results. Raising your question over there may turnup someone who has experienced this, and hopefully resolved the issue.
dawgdoc said:
I'm at a loss, a quick search using the terms odin, download, and something else did not yield useful results. Raising your question over there may turnup someone who has experienced this, and hopefully resolved the issue.
Click to expand...
Click to collapse
UPDATE:
After trying 3 different computers (windows XP & windows 7 64 & 32 bit, with Kies installed and without Kies installed), 12 different USB Ports, and 10 different cables at my house to NO AVAIL, just for a goof went to a friends house to try his computer (Windows 7 64 bit with Kies 2.6 & 3 installed), put the phone in download mode, connected it to his computer, with a random cable, opened Odin, and BOOM it showed up right away. I DON'T GET IT !!! WTF !! I have used Odin on no less than 1000 phones on my home PC with NO Problems, I try to hook this phone up to 3 different computers at my house (2 laptops and a PC), and Odin WOULD NOT see this phone. I am Stumped!
Glad you got it to work. I hope you were able to accomplish what you needed while you were at your friends.
dawgdoc said:
Glad you got it to work. I hope you were able to accomplish what you needed while you were at your friends.
Click to expand...
Click to collapse
Yes, I was able to Root the device with Towelroot after reverting from 4.4.2 Build NH3 to 4.4.2 Build NE3, Now I just have to get this thing home to "Fix" the IMEI number. One must be rooted before being able to "Fix" the IMEI number. I wish Samsung would just cut the **** with these unnecessary updates.....
This is one for the books. Must have just been a finicky phone..... Didn't like my computers, cables, or something.

Categories

Resources