[Q] odin will not detect my phone - Captivate Q&A, Help & Troubleshooting

i have windows 7 and a samsung captivaye flashed with heimdall 2.3.4 gingerbread. i want to flash 2.3.5 with clockwork mod and can only find one that comes with a odin one click. my problem is the comuter recognizes the phone heimdall does too but no version of odin will. any ideas on how to get odin to see my phone. and yes im in download mode

my computer is running windows 7 and i have a samsung captivate. my computer recognizes my phone, hemdall recognizes my phone but no version of Odin will. i am running 2.3.4 gingerbread flashed with heimdall but i want to flash it with 2.3.5 with clockwork mod which the only version i could find came in a odin one click package. any ideas on how to get odin to recognize my phone???
and yes i ran odin as admin still no go

Reinstall your drivers. After installing the Heimdall driver, your driver that you need for Odin is borked.

i have reinstalled the phone drivers many times. i eaven downloaded them from samsung and tried that that. when i plug my phone in the computer will say installing drivers then it says completed. i restarted computer right click odin run as admin but nothing shows up in the com box..

Look here
http://forum.xda-developers.com/showthread.php?t=1351224
For more help

can i unplug the phones usb cable from the pc while it is in download mode? i do not want to brick the phone

also is there a way to get out of download mode with out flashing the rom

got it. i let kies mini install drivers for phone then once kies mini found the phone so to did odin

oh and just help someone else who may be having these issues. yes you can unplug the phone as long as its not already flashing a rom. never unplug if already in the middle of flashing or you will brick the phone. to get out of download mode if you are not in the middle of a flash. if you find yourself like me and have put the phone in download mode and odin or whatever you are using will not recognize it or maybe you forgot to check usb debugging then unplug phone from computer remove battery for a few seconds and the phone should boot normally. tahnks guys for all the help i really appreciate it

I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.

rekamyenom said:
I have an S4 Active that NO MATTER WHAT I DO, Odin will NOT see phone in Download mode, it will with the phone on, and my PC will see the phone, but not Odin. I am stumped. I have tried 3 PC's, I have ALL the drivers and then some. I am Stumped.
Click to expand...
Click to collapse
Are you using the cable that came with the phone?
Have you tried a different cable?
Do you have Debugging Mode turned on?
You might want to post in the S4 Active Q&A forum.: http://forum.xda-developers.com/galaxy-s4-active/help

dawgdoc said:
Are you using the cable that came with the phone?
Have you tried a different cable?
Do you have Debugging Mode turned on?
You might want to post in the S4 Active Q&A forum.: http://forum.xda-developers.com/galaxy-s4-active/help
Click to expand...
Click to collapse
Yes & yes

rekamyenom said:
Yes & yes
Click to expand...
Click to collapse
If you connect your phone to the PC and then go to the computer's Device Manager, is it recognizing the phone correctly? Or are you getting the yellow exclamation point over the icon?
I use Heimdall when doing Odin tasks. It is an Open Source equivalent to Odin available for Windows, Mac, and Linux. I'm not too familiar with Windows problems because I have been on Linux for the past 7 years. I have only used Windows in those years for updates to a Captivate that only worked through Kies, and rooting an Acer tablet with a Windows only tool.

dawgdoc said:
If you connect your phone to the PC and then go to the computer's Device Manager, is it recognizing the phone correctly? Or are you getting the yellow exclamation point over the icon?
I use Heimdall when doing Odin tasks. It is an Open Source equivalent to Odin available for Windows, Mac, and Linux. I'm not too familiar with Windows problems because I have been on Linux for the past 7 years. I have only used Windows in those years for updates to a Captivate that only worked through Kies, and rooting an Acer tablet with a Windows only tool.
Click to expand...
Click to collapse
I get nothing when I connect the phone to the PC in download mode, but I get full communication when not in download mode. I have never tried Hemidall

I have seen some suggestions to try a different USB port, I expect you already have.
Other thoughts:
What version of Odin are you using?
Have you tried Kies?
Is your phone stock or modified?

dawgdoc said:
I have seen some suggestions to try a different USB port, I expect you already have.
Other thoughts:
What version of Odin are you using?
Have you tried Kies?
Is your phone stock or modified?
Click to expand...
Click to collapse
I have tried numerous computers, numerous cables, numerous USB ports, I have tried every version of Odin known to mankind, I have tried with kies, without kies, and my phone is completely stock, not modified whatsoever, this one has me stumped. I have used odin on no less than 1000 phones never have I had a phone not react to Odin. the phone reacts 100% of the time to anything but Odin, I am wondering if Samsung has released a security update that is preventing communication with Odin

rekamyenom said:
I have tried numerous computers, numerous cables, numerous USB ports, I have tried every version of Odin known to mankind, I have tried with kies, without kies, and my phone is completely stock, not modified whatsoever, this one has me stumped. I have used odin on no less than 1000 phones never have I had a phone not react to Odin. the phone reacts 100% of the time to anything but Odin, I am wondering if Samsung has released a security update that is preventing communication with Odin
Click to expand...
Click to collapse
I'm at a loss, a quick search using the terms odin, download, and something else did not yield useful results. Raising your question over there may turnup someone who has experienced this, and hopefully resolved the issue.

dawgdoc said:
I'm at a loss, a quick search using the terms odin, download, and something else did not yield useful results. Raising your question over there may turnup someone who has experienced this, and hopefully resolved the issue.
Click to expand...
Click to collapse
UPDATE:
After trying 3 different computers (windows XP & windows 7 64 & 32 bit, with Kies installed and without Kies installed), 12 different USB Ports, and 10 different cables at my house to NO AVAIL, just for a goof went to a friends house to try his computer (Windows 7 64 bit with Kies 2.6 & 3 installed), put the phone in download mode, connected it to his computer, with a random cable, opened Odin, and BOOM it showed up right away. I DON'T GET IT !!! WTF !! I have used Odin on no less than 1000 phones on my home PC with NO Problems, I try to hook this phone up to 3 different computers at my house (2 laptops and a PC), and Odin WOULD NOT see this phone. I am Stumped!

Glad you got it to work. I hope you were able to accomplish what you needed while you were at your friends.

dawgdoc said:
Glad you got it to work. I hope you were able to accomplish what you needed while you were at your friends.
Click to expand...
Click to collapse
Yes, I was able to Root the device with Towelroot after reverting from 4.4.2 Build NH3 to 4.4.2 Build NE3, Now I just have to get this thing home to "Fix" the IMEI number. One must be rooted before being able to "Fix" the IMEI number. I wish Samsung would just cut the **** with these unnecessary updates.....
This is one for the books. Must have just been a finicky phone..... Didn't like my computers, cables, or something.

Related

Phone Stucked At "At&t World Phone Screen"

I have Cognition V4.5.3
Im A Noob At This... Tried Ti Flash A Kernel With [APP] SGS Kernel FLasher
When I Rebooted My Phone Its Just Stuck At The Boot Screen...
Does Not Want To Go In Recovery Mode... Just Download Mode....
But Heimdall Does Not Recognize My Device...
What Can I Do? I Need To Get My Phone Back, Since Its A Gift
Thanks...
and i only have a mac... =/
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Try Odin 1 Click. You'll find it on here somewhere. It wil take you back to stock 2.1 Eclair. Then you can READ ABOUT flashing other ROMs and proceed from there.
bertito2580 said:
wow thanks for the help... -_____-
its my only phone.... right now im without phone and NOBODY can tell me how to fix this... Really... Thanks
Click to expand...
Click to collapse
im sorry but most of us can't even help you IF we want to The users of windows based PC's are greater in this forums compared to Macs. if there is drivers for mac, are they installed?
Since you only have a Mac, I would suggest installing Windows through Boot-Camp (included in Mac OSX) on a different partition. I read Galaxy S doesn't have drivers support for Mac OSX Leopart or later, not entirely sure if its true though, but I do have a MacBook Pro and had no success in finding a way to connect my phone to it by USB... Good thing I had a regular old Windows PC Desktop.
Then as Jack Man said, use Odin 1-Click found here
http://forum.xda-developers.com/showthread.php?t=731989
to reset your phone completely to factory settings, relatively simple to do as long as you read the instructions on that post. =)
Well since you only have a Mac and hiemidal is not see your phone i think your only option is to find a friend with a PC and give the Odin 1 click a try.
i ask my aunt for her pc,
Windows Vista 32-Bit
Downloaded And Installed The Drivers
Using Odin3 One-Click
I Put My Phone On Download Mode With The 3keyCombo
And The PC Says"USB Device Not Recognized"
Im Just Gettind Pissed And Stressed
It's My Only Phone.
What Can I Do To Fix This?
Also Tried Running Odin As Administrator... And NOthing...
bertito2580 said:
Also Tried Running Odin As Administrator... And NOthing...
Click to expand...
Click to collapse
Sir, just in case, did you reboot after installing drivers and BEFORE you tried connecting the device? Also, did you check if Odin detected your device when its connected in Download mode?
yes, and thats what in trying to do, to get odin to detect my phone in download mode...
Ok, is your phone detected by the operating system? If it does, then try using this other Odin thread instead, this one however will restore it to Stock Samsung Galaxy with 2.3 Gingerbread.
http://forum.xda-developers.com/showthread.php?t=1127249
Don't have to follow the rest of the instructions to root it just in case, but see if that version of Odin detects your phone.
actually thats the problem... windows vista doesnt recognize my device, either my mac... is there a solution to my phone or not? please help
OMG please help ((
I've Installed Captivate Drivers
Also
Galaxy S General Drivers
But When I Put My Captivate On Download MOde It Just Says
"USB Device Not Recognized"
One of the devices attached to this computer has malfunctioned and
Windows does not recognize it.
Are you sure it goes in to Download Mode (little android with a shovel)? Also have u tried different usb ports?
Like the above said, are you sure you are in download mode?
What USB port are you using if ots a desktop computer. There are known issues using front usb, plug into the usb on the back of the tower.
Also, are you sure odin doesnt see it? I know windows doesnt like it, but start odin, put phone in download mode, connect to pc. What does odin show? Any connected devices?
Sent from my GT-I9000 using XDA App
yes, im sure its on download mode and tried all the ports...
Im gonna try on another pc
to see if its the pc

Replacement I897UCKB2 build is not seen by Windows 7

I have two windows 7 pcs that both recognized my replacement I897UCKB2 phone that I got a little over a week ago. I installed Kies on one of them to upgrade my wife's Cappy to UCKB1. I connected my phone and saw an error that it wasn't recognized. I have uninstalled KIES, the drivers, rebooted, cleaned out Samsung registry entries, rebooted (many times), tried different ports (including on the back), etc - no dice. I tried the other pc which hasn't had any changes and that doesn't recognize it either.
I know the cable is good because my wife's UCKB2 (was replaced as well) is seen no problem using the same cable and computer.
I have tried with my phone in debug and not - mass storage, KIES, ask on connection - etc. I did previously root the phone with SuperOneClick on this build. I was about to flash a custom ROM tonight after waiting a bit but now I can't get any computer to see it although the phone does start charging. I haven't yet tried linux and heimdall but that is about the only thing I can think of at this point.
I started wondering if Kies somehow caused a problem on the phone - maybe because it was rooted? I tried restoring CWM since I have Titanium backup working and busybox, etc. In CWM I tried "reboot into recovery" and then I see the original 3e recovery. I tried "reinstall packages" and it fails the signature verification. I have flashed ROMs many times in the past and have never been "stuck" like this... Any ideas?
I would try flashing the original stock eclair, there is an odin one click around that will do it... "I897UCJF6-final-OCD-REV0.exe". Then try kies mini.
crt60 said:
I would try flashing the original stock eclair, there is an odin one click around that will do it... "I897UCJF6-final-OCD-REV0.exe". Then try kies mini.
Click to expand...
Click to collapse
Thanks but that is the ODIN I have always used in the past. It doesn't even see the phone when I connect it though. The phone will start charging but windows doesn't recognize that I connected it.
RichMD said:
Thanks but that is the ODIN I have always used in the past. It doesn't even see the phone when I connect it though. The phone will start charging but windows doesn't recognize that I connected it.
Click to expand...
Click to collapse
I had a friend who had that problem. When he plugged his phone into his computer, the phone would start charging but Windows wouldn't even play a notification sound to show the phone was plugged in. He couldn't access USB storage mode or anything. He called Samsung and was told his phone would need to be reflashed. His three button combo didn't work, so we bought a jig on eBay. We could get the phone into download mode that way...but Windows still/I] wouldn't recognize it. He called Samsung again and they replaced it under warranty, without any hassle.
Well, are you sure that you have your usb drivers installed correctly? Have you tried seeing if adb is recognizing the phone? Also, make sure that it is plugged in on all sides on the phone end of the the USB (sometimes the phone charges when it is plugged but unless you plug it in all the way, the computer won't recognize it)
try those...
pwneman said:
Well, are you sure that you have your usb drivers installed correctly? Have you tried seeing if adb is recognizing the phone? Also, make sure that it is plugged in on all sides on the phone end of the the USB (sometimes the phone charges when it is plugged but unless you plug it in all the way, the computer won't recognize it)
try those...
Click to expand...
Click to collapse
Thanks for the replies. I know the USB drivers are good because I can easily mount USB storage on my wife's captivate - same exact I897UCKB2 build with the same cable. Additionally, a second pc won't see my phone even though it did before. I have tried at least 6 different ports numerous times. I am thinking I need a replacement.
My question now is that it is rooted with busybox, etc and I can't use an unroot program from a PC. Will a factory reset under settings (not CWM) erase all traces of root?
Sent from my SAMSUNG-SGH-I897 using Tapatalk

Galaxy TAB P1000 NOT Detecting in ODIN

Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it

Bricked even with download mode ?

Hi All,
here is the story, I was on MilkyS GB rom, made a ndriod backup, then flashed dark knight 2.1 then wiped , flashed DK3 w/ Semaphone. Today, I was going to flash stock JVU via Odin but while I was charging up the phone I already noticed Windows was showing error saying something like ' USB device is malfunction cannot install' , so I thought that must be a DK3 bug for not able to access to the SD card, so I did not care.
Went ahead and tried to flash Odin, sure enough Odin did not detect my phone, so did Google and found 'Gnex USB drivers' which by the way took forever to install, while waiting , I thought I might as well just go back to MilkyS GB by using the backup I have done before, so I went in recovery tried to restore, but not successful, so I went ahead and choose reboot....now I am stuck at the boot screen, pull battery, I can go into download mode , however, Odin cannot detect the phone so I still can NOT flash anything.... (just now tried all kinds of drivers I can find, CM7 USB driver, Google usb_driver_r04-windows, even installed the drivers within Andriod SDK, still can't detect the phone..)
Any suggestions ? am I out of luck ? by the way, tried installing drivers in 3 x different laptops and with different USB port on them...
Have you tried a different USB cable? Also ensure KIES is not running & that there are no KIES processes running in the background. Make sure no other usb devices connected to the pc. I've also heard Windows 7 64bit can be the issue sometime but not sure so maybe try a windows xp pc.
Also try disabling any antivirus/firewall on the pc. I had this is issue but for me restarting pc and using a different USB port did the trick.
Should you figure out the USB issue you can't actually restore a Gingerbread backup from ICS.
You will need to get a stock rom (darky resurection should also work) and flash with ODIN. You will need a 3 file stock rom (pda,phone,csc) & 512 pit file.
From here you will need to select all files into relevant places, check repartion and run ODIN. Sometimes I've also needed to flash a second time with just the 3 files and repartition unchecked.
scubadude said:
Have you tried a different USB cable? Also ensure KIES is not running & that there are no KIES processes running in the background. Make sure no other usb devices connected to the pc. I've also heard Windows 7 64bit can be the issue sometime but not sure so maybe try a windows xp pc.
Also try disabling any antivirus/firewall on the pc. I had this is issue but for me restarting pc and using a different USB port did the trick.
Should you figure out the USB issue you can't actually restore a Gingerbread backup from ICS.
You will need to get a stock rom (darky resurection should also work) and flash with ODIN. You will need a 3 file stock rom (pda,phone,csc) & 512 pit file.
From here you will need to select all files into relevant places, check repartion and run ODIN. Sometimes I've also needed to flash a second time with just the 3 files and repartition unchecked.
Click to expand...
Click to collapse
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
bestjsg said:
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
Click to expand...
Click to collapse
I guess you have tried going back in recovery mode using the 3-button combo but that is also not working?
Odin isn't recognizing your phone but does windows recognize it? If you uninstall all samsung drivers and then try to connect your phone to PC does it ask for installation of drivers? .. if it doesn't that means your phone's usb could have become faulty.. (just speculating)
Or you can try to use Heimdall instead of Odin.. maybe that'll work for you..
bestjsg said:
thanks scubadude for your reply. Yes, tried 2 x cables, 3 x laptops and all the USB ports on the laptops, now trying on a clean XP , AV disabled PC still no go.
I know the Odin 3 file process and so on and I kind of know that I can't flash GB on top of ICS that is why I attempt to flash stock in Odin but I guess I was just impatient to wait for the stupid Samsung driver to be installed and made a stupid mistake...
Click to expand...
Click to collapse
Try using Heimdall for mac or linux. It does the same as Odin with no drivers.
Also try cleaning the contacts in usb port on the phone with a small brush(this worked for me when I had similar problems).
http://forum.xda-developers.com/showthread.php?t=878686
sorenba said:
Try using Heimdall for mac or linux. It does the same as Odin with no drivers.
Also try cleaning the contacts in usb port on the phone with a small brush(this worked for me when I had similar problems).
http://forum.xda-developers.com/showthread.php?t=878686
Click to expand...
Click to collapse
thanks tried Heimdall Frontend suite 1.3.1 , also tried Zadig.exe included in the package, the computer still does not detect the phone in download mode.
btw , I have also already use Android SDK to install the Google USB driver....see attached.
Had a similar situation.
Eventually used EZbase's "Odin" version and it worked using the drivers he linked to.
asaf-g said:
Had a similar situation.
Eventually used EZbase's "Odin" version and it worked using the drivers he linked to.
Click to expand...
Click to collapse
thanks just tried the drivers from EZbases Odin, still did not work.
btw, tried brushing the connector on the phone in case of dust etc , still no go.
anyone else has any idea?..so sad right now ...
Sent from my Dell Streak using XDA
Same happened with all my laptops featuring a intel chipset. My desktop with nVidia chipset is the only one that detected it.
bestjsg said:
thanks tried Heimdall Frontend suite 1.3.1 , also tried Zadig.exe included in the package, the computer still does not detect the phone in download mode.
Click to expand...
Click to collapse
Try using Heimdall for linux. The windows version depends on drivers while the linux does not need drivers.
Also try turning USB-debugging on. Some people report that this is needed for download mode, though I don't see how this can make a difference as the OS is not loaded when using download mode.
If this doesn't work I think you have a hardware problem.
EDIT: Don't use WM-ware etc for the above. I think an Ubuntu live CD will be fine.
sorenba said:
Try using Heimdall for linux. The windows version depends on drivers while the linux does not need drivers.
Also try turning USB-debugging on. Some people report that this is needed for download mode, though I don't see how this can make a difference as the OS is not loaded when using download mode.
If this doesn't work I think you have a hardware problem.
EDIT: Don't use WM-ware etc for the above. I think an Ubuntu live CD will be fine.
Click to expand...
Click to collapse
thanks tried created a ubuntu live booted usb drive , installed heimdall , same thing can't detect the phone and then tried SDB in command prompt but gave error : device not found....
Sent from my Dell Streak using XDA
tried windows sdb , will try booting into ubuntu tonight and use sdb ..if that exist...
Sent from my Dell Streak using XDA
tried sdb via linux also , and got error device not found... anyone any idea ?
Sent from my Dell Streak using XDA
have read more threads haven't found a solution yet...
Sent from my Dell Streak using XDA
Same predicament
In the exact same predicament, was on MIUIv4_I9000_2.3.23_v1.1...
screwed up trying to go back to GB rom, can get to download mode,
but stuck there. Tried Kies and all other drivers. Tried Odin, nothing.
Installed Ubuntu, tried Heimdall, all for not.
Guess I have to send it back to Virgin....
me sad !!
eurorv said:
In the exact same predicament, was on MIUIv4_I9000_2.3.23_v1.1...
screwed up trying to go back to GB rom, can get to download mode,
but stuck there. Tried Kies and all other drivers. Tried Odin, nothing.
Installed Ubuntu, tried Heimdall, all for not.
Guess I have to send it back to Virgin....
me sad !!
Click to expand...
Click to collapse
thanks for sharing ..just weird that no drivers for ics rom works and I was always told that as long as you can get to download mode the phone is not truely bricked...but guess that saying must be changed now....i
will virgin fix it for you ? will they charge you ?
Sent from my Dell Streak using XDA
My SGS is past warranty.
Virgin sent me to a Samsung repair shop in ville St-Laurent.
They're charging me 50$ to reflash, extra 25 for 1 day service
Getting my baby back 10 am tomorrow... Whoohooo !!
eurorv said:
My SGS is past warranty.
Virgin sent me to a Samsung repair shop in ville St-Laurent.
They're charging me 50$ to reflash, extra 25 for 1 day service
Getting my baby back 10 am tomorrow... Whoohooo !!
Click to expand...
Click to collapse
that is great news....do you know if they will have to open up the phone and flash the hardware?
Sent from my GT-P7510 using XDA

[Help!]I'm stuck on CSA7 with VZW phone, Odin - "Can't open the serial(COM) port"

[Help!]I'm stuck on CSA7 with VZW phone, Odin - "Can't open the serial(COM) port"
I've been trying to re install N960USQU1ARL1 with Odin, I'm currently on N960USQU1CSA7. I've used 3.13.1_3B_PatcheD and 3.13.1 with no luck. I always get "Can't open the serial(COM) port". I was worried it was conflicting with my existing HASP device or drivers for my Null Modem and RS232/485 drivers I use for work, but after uninstalling them and never had KIES installed nothing changed. I even tried with a Windows 7 VM making sure the correct drivers were installed and my phone was recognized correctly. I'm thinking it's a compatibility issue with Pie and Odin but I'm not sure. I'm hoping someone here can help with some wizardry.
Try maybe with a different cable
I've tried 3 cables and different ports. I've tried C to C and C to A as well
Have you rebooted your PC and your phone? If not, that should fix it. I soft bricked last night and had to do both.
Sent from my SM-N960U1 using Tapatalk
joshw0000 said:
Have you rebooted your PC and your phone? If not, that should fix it. I soft bricked last night and had to do both.
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
I did yesterday but my PC has set overnight turned off so I'm going to try again.
well i hate to state the obvious but, have you installed sansung android drivers?
install smartswitch if unsure. it will add appropriate drivers.
bober10113 said:
well i hate to state the obvious but, have you installed sansung android drivers?
install smartswitch if unsure. it will add appropriate drivers.
Click to expand...
Click to collapse
making sure the correct drivers were installed and my phone was recognized correctly.
Click to expand...
Click to collapse
I did, I had to use a different PC entirely. I'm not sure if it there is a problem with my current version of windows, it worked fine when I had to use Odin a few months ago. But using a different pc allowed it to work.
Try annother PC.
Reboot your Phone into Odin-State.
I had nearly the same problem like u. But my Phone was recognized, but it did not response to odin.
A Softbrick. Just reboot the Phone backt into Odin Mode, Reboot PC (What u did before) or Change PC and flash again.

Categories

Resources