Database Develop

[Q] Boot loop after ROM Install via CWM -w/VIDEO

Hi there!
Recently I've been trying to upgrade my SGS with a custom ROM, Darky's 4.0. After installing the ROM as instructed (using CWM and copying the ROM to the internal SD card), the ROM Installs, after the 1st boot it keeps looping, see video:
http://www.youtube.com/watch?v=kWrijyv-8PM (not edited, sorry for that)
Original SGS:
GT-I9000T
I9000TUBJG7
Product code: GT-I9000HKTPCW
kernel: 2.6.28
Build: eclair.ubjg5
The first upgrade I made was via Kies reg-hack to: GT-I9000HKDXEU, 'I9000XXJF3/I9000OXAJF3/I9000XXJF3/I9000XXJF3, and it installed Stock Froyo update. The SGS worked fine with exception of the radio, which didn't lock my 3G over the 850 band.
Currently:
9000M running STOCK Australian I9000UGJG8 (due to radio issues, besides the Canadian ROM, this is pretty much the only ROM which modem.bin's works properly with my network, 3G 850MHz).
FW:2.1-update1
Kernel 2.3.29 [email protected] #2
Eclair.UGJG8
I tried with the following STOCK ROMs prior to the custom ROM install: I9000XWJM1, I9000XWJG5, I9000XWJM9 and I9000UGJH2.
I have ALLWAYS made an SD unmount and format, formatted the cache and factory reset. After it loops, the only way to get it back is using downloader mode and installing a STOCK ROM via ODIN (always do a .512 pit repartition)
Any suggestions to make this SGS get the ROM? maybe the kernel is bad?
Cheers!

Have u tried to format everything (exept for sd) and flash again?
Btw i love infected
Sent from my GT-I9000 using Tapatalk

Format everything? Using which app or program?
I've always used the recovery's wipe commands and the *2767*3855# command. Is that enough? or am I missing another cooler and invasive method ? A friend has suggested to use davlik.
Yeah! Infected rulz, that's what I listen when I'm in the bricking-mood lol

As i saw you have cwm installed... Boot in recovery and select mount and storrage and then select eveeything that contains format (boot wont work to format) and dont select format internal sd but DO select format sd-ext
Edit: if it doesnt work write again then ill upload u the kernel that fixed it for me yesterday. Its from this forum but since ive discovered it by coinsidence, i cant remember how its called. U can format everything then select mout usb storrage (in cwm) and push it on the root of sd. Its an update.zip
Sent from my GT-I9000 using Tapatalk

shrooms90 said:
As i saw you have cwm installed... Boot in recovery and select mount and storrage and then select eveeything that contains format (boot wont work to format) and dont select format internal sd but DO select format sd-ext
Edit: if it doesnt work write again then ill upload u the kernel that fixed it for me yesterday. Its from this forum but since ive discovered it by coinsidence, i cant remember how its called. U can format everything then select mout usb storrage (in cwm) and push it on the root of sd. Its an update.zip
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
I gave that a shot, still no cigar. I guess that it goes deeper than just a formatting... maybe that secret kernel u have might brick me... erhm! I mean help me
Shoot! and I'll try it.... this OEM sucky ROM aint working that good over the Australian ROM lol. now I lost access to my cam ! sucks.
Thanx!

Try any universal lagfix kernel with clockwork enabled. Since ur phone is still flashable and ur phone still has funktionality (cwm works) im pretty hopefull that it is software/sd format related. Thats one of those cases where servic centre sais a full flash is needed by now only they are able to do that:-( but till now i always found a way to work around that by trying everything in every way. I always thought my phone is bricked anyhow so it can just get better and by coincidence it worked all of a sudden
Sent from my GT-I9000 using Tapatalk

Ihave I900T with same rom image
and am trying to upgrade to FROYO as well. Any advice on how to do so would be appreciated. Tried the various registry hacks and none have worked. I'm happy to use Odin but not sure which is the correct ROM image to use (from samfirmware). Thanks!

zevrosenthal said:
and am trying to upgrade to FROYO as well. Any advice on how to do so would be appreciated. Tried the various registry hacks and none have worked. I'm happy to use Odin but not sure which is the correct ROM image to use (from samfirmware). Thanks!
Click to expand...
Click to collapse
Well, first thing is first. I've been a couple of weeks away from my SGS tweaking. I'm right know figuring a way to make a backup of my ROM (non-nandroid), in which I can extract the Kernel, Modem and CSC (I received a brand-new unit from my provider, so I will take advantage of it )
That way I can flash them back in case of a screw-up. I didn't have that much luck with modems offered in other ROMs, so I need to keep an OEM copy of my stuff.
Also make a good copy of your /efs folder in case you mess it up. It took me around 3 weeks of reading before I started making any changes to my phone, so I'll recommend doing the same; there's no "quick-start" or quickguide on how to start. You will en up with 6 different windows open reading from everywhere
The FWs from samfw are OEMs. Theres like "not much" of improvemente if you switch to those. Take special attention to the one you chose cause most likely you will lose your 3G and/or 850MHz band. I recommend using only Australian and Canadian ROMs(I9000UGJG8 and I9000UGJH2 worked for me, you might try also I9000UGJK3). Regarding custom ROMs, you will need to try and try until you get it right as our SGS model is not the most popular. This means endless flashing
Cheers.

Sgs froyo flash nam bands
Thanks for the advice. This project consumed my thanksgiving but I finally got a good working SGS in the ATT network. I bought an unlocked SGS from Negri Electronics with the USA 3G bands but it came without FROYO and didn't have the 3 button restore available. After reading and reading (your note about multiple open windows at the same time is all too true!) and trying and trying, I was finally able to get to download mode by installing all the Android SDK tools onto my PC then going in by way of ADB. Far more complicated than a simple registry hack and ODIN but it worked.
I installed the DOC BUJP8 v9 ROM with all the enhancements and AOSP Email (I tried and tried to get stock FROYO email to work with 2 exchange accounts but it was impossibly slow and didn't work) while AOSP is working fine.
It seems, because my SGS had the 850 bands to begin with, that it's working fine. I found this other post on XDA (#770041) that had some keycodes I was able to use (*#2263#) and confirm I still have the 850 band.
Needless to say, make a good backup and be prepared - as already warned - to flash several times and it was ultimately a "trial and error" process that worked.

does anyone have the original brazilian/latinamerican i9000T firmware? I flashed the SGS I got from Negri with spike speedy and it looks like I lost my 850 3G band.
I never did find out how to totally back up the SGS as in back up each PDA, PHONE, and CSC file so as to be able to truly factory default it.

Re-flashed Stock and now unable to root

Just a quick background, I purchased my DS7 at staples and rooted it and installed CWM using the info found on the forums so I could connect to my ad-hoc tether. Last week I attempted to install the HC upgrade and got the mis-match message. I booted into CWM and started looping. In an effort to correct this I mistakenly wiped the memory (big mistake!). I found the instructions on flashing the stock ROM (turned out that it was TMO) and got the unit running again. I called Dell (I have posted in another thread on this) and they are to send a pickup. In the meantime I have found instructions on flashing the OEM stock wfi ROM and have done so. I, like many others, noticed that the service tag was wrong and edited PG23/line220 to reflect my correct tag ( note to posters of ROMs and those who would flash: before doing so write down all the information about your unit so you can make changes later if needed). I now have most everything back to pre-upgrade status, but Gingerbreak v1.2 will not root. When I attempt it the program runs but I get a message “Not sure what happened her. Either the exploit failed or the reboot failed. Please reboot manually and see if you have Superuser!” I reboot and nothing, no Superuser and no root access. Also, before I attempt the “unroot’ option is greyed out so I take it that the unit is not rooted nor can I see root files in file manager One thing I have not tried is the CWM un-install that was included in the stock ROM flash thread. Since I don’t see it and I boot into fastboot I am guessing that it is gone. Any suggestions or has anyone had this issue as well?
Another note, I too have the 338 version and no auto update yet. I am not real sure I want to update now. To those that have updated, can you connect to ad-hoc networks with out changing the WPA?

Big wall of text, if you're on 2.2.x reflash CWM 3.0 and flash Superuser.zip as a update.zip though it.
If you're on HC, flash CWM 4.0 and flash Superuser7.zip on it.
Superuser.zip will always work on 2.x roms.
Superuser7.zip will always work on 3.x roms.
If you try and run the wrong one it will just 'run' and give no error, it will simply not do anything, but it wont damage anything.

Thanks, you think cwm is still lurking and giving problems? So I need to reinstall cwm and use it to install the zip? Won't CWM interfere with the HC update?

alchrisr01 said:
Thanks, you think cwm is still lurking and giving problems? So I need to reinstall cwm and use it to install the zip? Won't CWM interfere with the HC update?
Click to expand...
Click to collapse
If you have CWM installed you won't get the update automatically no matter if you have a matching ROM or not... you must be FULLY stock... but I see no sense in waiting, TheManii has already posted the releases that are coming out... why not just flash the zip

Rom

Seen an alpha 3 ICS rom. Can I just download that and flash it over my current rom or does it habecto be done certain way. I've flashed before on my evo but this seems a little bit more complicated
Sent from my SPH-P100 using XDA App

I'd rather go the full procedure they describe within their thread - imho especially you have needs for clockworkmod. Found that to be a quite safe way for me.

I would I just don't have access to a pc. Does ICS run fine on your tablet. Is it worth it
Sent from my SPH-P100 using XDA App

Once you have CWM Recovery installed, getting the ICS Alpha on your tab is not difficult if it's listed as supported in the thread.
Only thing: This is an ALPHA build. That means many things are not functional. The build is aimed at developers/testers.
Having given a shot at it, this build is surely not a daily driver for someone who needs its tab to be functional and reliable. Many of those problems have work arounds however but since the tablet is not mostly used by myself, I did not take the risk of having it be unreliable...
In short: it should work and not eat your hamster... But it is not a fully functional rom yet, be prepared for some trouble... Be sure you know how to go back in case of trouble... and read instructions carefully

If you want a good ICS rom here ya go. FYI!!! THIS IS FOR CDMA TABS!!!
Get rooted and CWM'd via Rodderick's thread in our Development section.
From there do the following (all credit to JT from here on out)
Download http://k.22aaf3.com/jt1134/vzwtab/cwm-recovery-5.0.2.7.tar
Extract the contents. You will have two files zImage and recovery.bin
Odin these two files to your tab while your tab is plugged in to the PC and in Download mode. This will bring your clockworkmod up to 5.0.2.7 which is a must to install the rom I'm about to link.
Next go to this thread
http://rootzwiki.com/topic/11697-rom-cdma-aosp-ics-cm9-build-31-0104-x-2/
At the bottom of the first post download the 3.1 ROM the 3.1 Patch and the gapps files.
Once those are downloaded boot your tab up to normal operations and plug it into your PC again. Now transfer those three files to your tab.
Boot up into clockwork recovery wipe the cache, dalvik, and do a factory data reset. Then flash the 3.1 file first, then flash the 3.1 Patch, then flash the gapps files.
If everything says it installed correctly the only things that won't be working are camera (which it does work in panorama mode) and possibly 3G. (Never tested 3G as I only use wifi).

Can you please post pictures and how can I check which cwm I already have? If I already have 5.0 can I just go ahead and flash? One more thing is this a whole new ICS or the ones going around. Thank you much

So I checked and I got 4.0 cwm. With that said. I don't have access to a pc. Is there any other way to upgrade to 5.0 cwm? PLEASE someone reply with yes. I'm getting bored with this andcwpuld like to try ICS. Thanks

rjumawan said:
So I checked and I got 4.0 cwm. With that said. I don't have access to a pc. Is there any other way to upgrade to 5.0 cwm? PLEASE someone reply with yes. I'm getting bored with this andcwpuld like to try ICS. Thanks
Click to expand...
Click to collapse
Without access to a PC I think you are making life very difficult for yourself.
You do not state what Tab you have; below I linked to the install for the P1010 only...I did this for reference because you will see it required Odin to flash it i.e. access to a PC.
http://forum.xda-developers.com/showpost.php?p=20195348&postcount=1

Thank for the reply. Yeah I know it makes it, harder just seeing if there was a way around it. I'm playing with the sprint galaxy tab. Not much to play with out there for it.

[Q] Dead?

I was working on getting 4.4 AOSP kitkat on my Atrix HD, and it was going great. While backing up with CWM, it failed on the data, but I figured I could just restore my files from a back up. When I went to put the rom on it, I got some no_contexts error and it said somethign about metadata. I tried to restore the backup and got a md5 fail. I used the advanced restore to let it skip the data part, but all parts gave a md5 fail. Now for somereason, I'm unable to connect through ADB, though fastboot still works, so I can't try pushing a stock rom. I tried adb sideload, but that didn't even remotely work. I also can't charge my phone, and it has a low battery. Does it charge in fastboot or recovery mode? Please help.

Phew
Ok, so I was looking around for a way to get back to stock without adb, which, as I said earlier, I couldn't get working halfway through. I was looking around for a way to do it with fastboot, and found rsd lite. I downloaded the files I needed, but it always failed 1/23. I then thought to just do it manually, and it worked perfectly
On a side note though, is there a way to use fastboot to flash nonstock roms? Would I just follow the same commands I did for the stock version? Is there any specific version I should download to use fastboot with it? I am still wanting an as-close-as-possible stock version of 4.4 for atrix hd. Also, did I do anything wrong the first time, or was the download corrupt?

ace_case said:
Ok, so I was looking around for a way to get back to stock without adb, which, as I said earlier, I couldn't get working halfway through. I was looking around for a way to do it with fastboot, and found rsd lite. I downloaded the files I needed, but it always failed 1/23. I then thought to just do it manually, and it worked perfectly
On a side note though, is there a way to use fastboot to flash nonstock roms? Would I just follow the same commands I did for the stock version? Is there any specific version I should download to use fastboot with it? I am still wanting an as-close-as-possible stock version of 4.4 for atrix hd. Also, did I do anything wrong the first time, or was the download corrupt?
Click to expand...
Click to collapse
I'm glad to hear you got things back into working order! With regards to flashing any custom ROM, the safest way is to use a custom recovery. Currently, as far as I can tell, the only official recovery for the Atrix HD is CWM but that's fine. You do want to be sure that you have the latest, most up to date version of CWM installed. As of right now, I believe that is 6.0.4.4 (http://clockworkmod.com/rommanager, mine already might be out of date again) and that may be where your problems came from when you were wiping and getting errors.
With regards to a close to stock 4.4 for the Atrix HD, there is an official build of CM available here: http://download.cyanogenmod.org/?device=mb886 although the latest build is from February, I can assure you that from running it on my Atrix HD it is definitely much smoother than what Motorola has offered (to date) for this device. There have been promises of official 4.4 support but I haven't seen anything come from that as of today (see here for more info: http://goo.gl/oK34W0)
CORRECTION: The official support for Atrix HD is here: http://download.cyanogenmod.org/?device=moto_msm8960
It is a merged thread for all of the devices mentioned here: http://wiki.cyanogenmod.org/w/Moto_msm8960_Info
I can't vouch for it personally but others have said that it has fixed a lot of bugs since the single device support that ended in February...

[Q] VERY worried about flashing miui rom and new bootloader.

I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.

Jeffril said:
I have just recently restarted using this phone due to my uscellular S4 getting turned off. I am now back on my LG-P990 currently rooted and running CM10.1. BUT most importantly to me is the fact that I have all my wonderful apps on my s4, I want to be able to use them by using the LG phone as a tether and calls not much else BUT CM10.1 tethering does not work, so i find myself flashing rom after rom, avatar rom, older CM mods, none would turn on tethering, so i flashed a modded version of MIUI for this phone and it worked except for ONE thing no signal, tethering turned on just fine so i decided to look around for other roms and found Slimrom TRYED to flash it didnt work, try to flash actual MIUI roms off there site, didnt work, met with an error in CWM Recovery after some searching I found its because Im running the OLD Bootloader -_- THIS is the issue im having IF MIUI does NOT work is it possible to downgrade the bootloader again so i can restore my CM10.1 backup? I have been working at this for a week, if there is something here about this can someone please just point me at it? I would appreciate any help.
On a side note i DID soft brick the phone the other day and found a program called nvflash witch flashed an install of CM mod. Dont know if that will help any.
Click to expand...
Click to collapse
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.

NoDze said:
I really do not understand how other ROMs deny Tethering. Did you flash the latest 2.x kernel by pengus77 after installing the rom? Did you make a clean install(wipe everything then install)? On the other hand, yes you can switch bootloaders as much as you like, just remember that changing the bootloader wipes everything on your internal memory, so do a backup. Did you try just plain old stock 4.0.4? Should work there. Ask anything you want, if you're still having questions.
Click to expand...
Click to collapse
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?

Jeffril said:
As to the flashing to stock i lost the original rom backup i had made along time ago and cant find the original firmware anywhere online. When I flashed CM 10.1 I just ran with it, when i go to try tethering it says "Turning on portable wifi hotspot." and it stays on that no matter what untill i restart, left the phone running for 2 days once and that was still stuck on that before i restarted. As for flashing a 2.x kernel i had no idea about that. But yes when i did the installs i would do a clean wipe and install. Most of what i read online led me to believe that there was an error with CM 10.1 nightlys that was not being fixed for the tethering. So that is why i decided to go to another rom. Two questions one how do i go about finding the original firmware for this phone and two how would i go about updating or downgrading the bootloaders and could i be pointed to the files please?
Click to expand...
Click to collapse
Okay, This is SFSP by @sgspluss which is a pretty fast, stable and battery-friendly slimmed down version of stock ICS. It is available for both Old and NewBL, so you might want to try that first. This is AIO Toolkit. I know that you've used it and bricked your phone, but try again, and for the love of God install the nvflash drivers because most people skip that part. You have to do it manually and if you're running Windows 8 you need to disable Driver Signature Verification. But yeah, you switch bootloaders with this.