[Q] Can't connect to pc - Galaxy S I9000 Q&A, Help & Troubleshooting

Hi,
Maybe for you this is a standard question. But i've got a problem. When i connect my phone to my pc nothing happens on my phone. My pc sees an unknown device and can't install the driver for the device. That's because nothing on my phone happens. This is so on all my pc's at home. So how can i solve this problem..
I'm running JVR Odexed with Darkcore 3.0

Again this same.
You have installed a Kies? It solved my problem with this

uninstalled it ; no difference..

reinstalled kies, put usb option in galaxy and conect to pc.

already did everything, odin doesn't recognize it either when i have it in download mode..

Related

[Q] Unable to connect to PC

Hello
I have Froyo 2.2 I9000JXJPB
I used to be able to connect to PC but not any more. Im using Windows 7 64
I even tried and restored my laptop for factory condition and wiped out my galaxy.
Sometime when I connect the phone with the usb cable and PC would say unrecognized peripheral device and most of the times nothing happenes
it does not help if USB debug is checked or not
I even tried different usb ports in the laptop but nothing work
its driving me crazy
need help please
ok, put the phone in download mode and then connect it, try a USB port that connects direct to the motherboard, usually at the back of the tower.
also if that fails, try to uninstall kies and then re install it, that will re install the drivers.
then post back with the result.
EDIT: just realised your on a laptop not pc
omozali said:
Hello
I have Froyo 2.2 I9000JXJPB
I used to be able to connect to PC but not any more. Im using Windows 7 64
I even tried and restored my laptop for factory condition and wiped out my galaxy.
Sometime when I connect the phone with the usb cable and PC would say unrecognized peripheral device and most of the times nothing happenes
it does not help if USB debug is checked or not
I even tried different usb ports in the laptop but nothing work
its driving me crazy
need help please
Click to expand...
Click to collapse
Download and install these on your pc/laptop , your problem will be fixed
http://drivers.softpedia.com/get/MOBILES/Samsung/Samsung-Galaxy-S-USB-Driver-for-Windows-x64.shtml
Before postig my question I tired uninstalling and reinstalling kies. also tried driver reinstall option from kies
I downloaded the driver separately tried installing several times but it did not help...
Installation always endup with a message Device driver was not successfully installed
Unknown device device unplugged
Unindentified device device unplugged
If i recall correctly my problems maybe was with the last update with kies
if you go into computer > device manager and then select on the 'unidentified driver' you can select uninstall.
then start the process again, and also try installing it for the 2nd time with a different port.

[Q] Usb problem after flashing to 2.3.2

Can anyone please help me?
I flashed my sgs with odin to 2.3.2 i downloaded the files from samfirmware.com, everything is working fine just like the other times i flashed my sgs, the only thing is: my pc's and laptop don't reconize my sgs at all, the win pop-up tells me the usb device isn't reconized becouse it't broken. It doesn't even try to install drivers, so i did thay manualy. Still the same! Next i tried with two other (new, original) usb cables... No succes. Then i tried other pc's with different versions of windows, again... No succes.
For the record:
my sgs does charge when connected to usb
Tried usb debugging
Tried factory reset
Odin cant find phone
No mass storage
No kies
No mediaplayer
Okay my question: does anyone know how to fix this?
If no, can anyone create a update.zip to flash back to stock eclair or froyo?

Help...ODIN won't recognize phone in download mode

I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Daneshm90 said:
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Click to expand...
Click to collapse
Yes..."SAMSUNG USB composite Device" comes up with an error. Device status shows, "This deveice cannot start. (Code 10)"
Nexus S Drivers?
Maybe u can try with Nexus S Drivers.
U can donwload from developer.android.com/sdk/win-usb.html
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
hamsterkiller said:
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
Click to expand...
Click to collapse
This did it! Thanks.
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
do you have the kies drivers installed? and is kies not running (inc. shut down tray agent?
try another usb port, that was a problem I had, Odin is picky with good or bad usb ports...
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=961956
Sent from my GT-I9000 using XDA App
SamHaLeKe:
So i tried this, but it doesnt help. I still have in device manager something wrong.
When I'm trying Update Driver Software, windows cant found right driver...
Is it possible, that I something f*ct up at last flash? Before it everything works fine. When I flashed first time, i forgot the *.pit file - odin wrote "failed" - I tried it again, but correctly - everything was ok - I fashed kernel - after that in CMW I Instaled *.zip file with Juwe's ROM 4.3.1 and my phone reboot in landscape mode... and i cant change it to normal mode.
I tried factory reset from phone - there are some red lines with this: tsf format failed on dev/block/mmcblk0p2, but when i go to CWM mode through (volUP+home button+on/of button) and i did a factory reset there - is it without red lines. Somebody ask me if i tried reflash - so i am here with my "driver problem"
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
toxic1 said:
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
Click to expand...
Click to collapse
Noooooo, not reinstall that bloath ware, just the NEW drivers!
Sent from my GT-I9000 using XDA App
lol ok then just drivers then
I know this may sound dumb, but make sure you are using a compatible cable.. i.e. does data transfer, I bough a replacment cable months ago for my damaged one under the impression it did data because I could connect and transfer to USB (I know this is data)... but kies would not recognize the phone.. I ended up buying a real replacement. Problem solved.
I think, that my biggest problem is cannot connect to kies and odin...
i am in the end... so cabel is the same, i used it when i flashed befor - as i said my problem is in phone, not in drivers or cabels. Is here something to do flash without this drivers?
can you confirm there is no issue with your USB ports on your computer? just seems odd it wont recognize your phone in download mode... you are placing it in download mode when using odin right?
I just did a flash with mine to a stock rom,
Same problem, I can get to DL mode, but it does not recognize,
When I am in the standard Tab OS, with USB as mass storage, I can see if fine.
Odd how it just happened as well. I'd like to follow this thread see where it goes.
*edit reinstalling drivers does not resolve the issue,
- have not tried installing keis again yet though,
- also Odin recognizes it in Recovery Mode
*edit again - sorry guys, didnt realize i was in the i9000 forum, hit this on a google search and replied
I can go to the download mode throught 3-buttons combo - but odin recognize my phone - the same thing is in kies - it's vicious circle - i hope flash help me - but I cant do it, because i cant connect to odin
Unfortunatly I am out of help... I thin kyou may need someone who knows ADB and the phones system internals if ODIn won't recognize your phone in Donload mode... I have had my phone in several bad situations(Fried internalsd/bootloaders) but download mode would always connect me to ODIN..
Last try, try different versions of odin, 1.3 - 1.8 apparently it can be testy with different versions of windows.
Try the drivers & Odin 1.83 from my signature. Works all the time.

[Q] Galaxy S soft brick(?) + USB failure(?) problem

Hi,
I was using F1 V6 ROM on JVK for some time (flashed it with no problems using Odin and Clockwork). After some time, it started to crash more often. I triend V7 but it was even worse so I got back to V6. The only problem was often restarts and sometimes slow operation.
Yesterday I decided to switch to Cyanogen to give it a try. I did it without flashing from scratch. I just used Cyanogen 7.1 installation through Clockwork. It seemed OK untill I tried to connect my phone to PC via USB. I couldn't get any response from PC (not even a sound indicating that something was connected to USB) or Phone (no mount USB screen).
So I was able to charge my phone through USB but not to connect it to PC (tried 2 PCs, different cables, different ports). It doesn't seem like driver problem (no sign of connecting phone to PC, nothing).
I thought that it might be some problem with Cyanogen ROM. So I tried to go back to F1 V6 (wipe) through Clockwork. After doing it, I got boot loop but still showing the logo of Cyanogen (not SGSII from F1). Having no USB connection and being unable to start the phone, I tried to do recovery (I had a backup of F1 V6 from the moment before installing Cyanogen. That didn't go well either. The process stopped and left me with Samsung Galaxy S logo (no boot loop - just hanging there). I cant get into recovery mode anymore. I can only get to download mode.
So the status right now is:
Download mode - OK
USB - can't get phone to connect with PC (no signs of connection so probably not a driver problem but maybe? I tried reinstalling kies, drivers, running Odin, no sign of connected phone, USBDeview shows no Samsung or Kies or Android drivers in my system right now).
Hanging on the Samsung Galaxy S screen.
Did anyone had similar situation?
What do you advice? Any idea on a atest checking if USB hardware is fine?
Was it possible to break USB hardware or driver in phone by installing Cyanogen 7.1 on F1 V6 SGS2?
Any help would be appreciated.
Thanks
kaminkac said:
Hi,
I was using F1 V6 ROM on JVK for some time (flashed it with no problems using Odin and Clockwork). After some time, it started to crash more often. I triend V7 but it was even worse so I got back to V6. The only problem was often restarts and sometimes slow operation.
Yesterday I decided to switch to Cyanogen to give it a try. I did it without flashing from scratch. I just used Cyanogen 7.1 installation through Clockwork. It seemed OK untill I tried to connect my phone to PC via USB. I couldn't get any response from PC (not even a sound indicating that something was connected to USB) or Phone (no mount USB screen).
So I was able to charge my phone through USB but not to connect it to PC (tried 2 PCs, different cables, different ports). It doesn't seem like driver problem (no sign of connecting phone to PC, nothing).
I thought that it might be some problem with Cyanogen ROM. So I tried to go back to F1 V6 (wipe) through Clockwork. After doing it, I got boot loop but still showing the logo of Cyanogen (not SGSII from F1). Having no USB connection and being unable to start the phone, I tried to do recovery (I had a backup of F1 V6 from the moment before installing Cyanogen. That didn't go well either. The process stopped and left me with Samsung Galaxy S logo (no boot loop - just hanging there). I cant get into recovery mode anymore. I can only get to download mode.
So the status right now is:
Download mode - OK
USB - can't get phone to connect with PC (no signs of connection so probably not a driver problem but maybe? I tried reinstalling kies, drivers, running Odin, no sign of connected phone, USBDeview shows no Samsung or Kies or Android drivers in my system right now).
Hanging on the Samsung Galaxy S screen.
Did anyone had similar situation?
What do you advice? Any idea on a atest checking if USB hardware is fine?
Was it possible to break USB hardware or driver in phone by installing Cyanogen 7.1 on F1 V6 SGS2?
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
Cyanogen uses a different file system, so to get it back to a Sammy ROM you need to flash it with Odin. and cyanogen doesn't use the Sammy driver for connecting to the PC. download nexus s drivers from the Android SDK and install it.
Sent from my GT-I9000 using xda premium
OK, so how do I install these drivers when my PC can't see that I have my phone connected to USB port? There is no driver error. After connection nothing happens.
Is there a way to install these drivers on Windows 7 without actually having sgs listed on device list?
any help with that?
kaminkac said:
OK, so how do I install these drivers when my PC can't see that I have my phone connected to USB port? There is no driver error. After connection nothing happens.
Is there a way to install these drivers on Windows 7 without actually having sgs listed on device list?
any help with that?
Click to expand...
Click to collapse
Get your phone into download mode (volume down + home + power) and see if windows lists it then.
Sent from my GT-I9000 using xda premium
Thanks but it does not.
No sign of connecting phone to PC.
any ideas?
kaminkac said:
Thanks but it does not.
No sign of connecting phone to PC.
any ideas?
Click to expand...
Click to collapse
Reflash the CM7 Rom, and see if it shows up in device manager. Do you get an option on CM to share disc drives with usb plugged to the computer?
Oh, and if you have KIES installed, try remove it and remove the driver pack too (i know it affects ODIN's ability to see the phone).
Solved
Thanks for help.
I got different cable (third) and different (third) PC and somehow it worked - PC noticed connection of SGS in download mode and than it was easy.
I installed clean JVT, than CF-Root and CM 7.1 + google apps.
It seems to work fine for now.
Please close this thread.
Cheers

Usb storage problem help!

Hi to all!
From Yesterday i have i sudden problem i never had.
When i connect my i9000 does not anymore show the 2 drives (usb storage of both internal external sd) on my computer.
I use Glitch kernel with latest cm7 kang.
When i connect the phone via usb to the pc,sometimes i get the erroe usb device not recognised (win 7 x64), and connects and disconnects randomly(always showing the error),other times doesnt do anything.
I tried cleaning the port,different pc usb port,different pc's, factory reset,different cable,older versions of glitch kernel or cm7.
Formatted also boot and system folders(of course also wipe data etc).
Installed kiss,boot the pc with phone off and then on.
Tried win7 x64 drivers.Sometimes i get on windows unknown device that i cannot find drivers that accepts.
On off usb debug mode and restart.
Nothing seems to work for me.
So id like to ask.....Should i try to go back on stock(firmware+kernel)?
And how is it done???
Or maybe its the port fault?
Any ideas?Noone?
Could someone please tell me how to go back on stock?
First to stock kernel then to stock firmware?
Thanks
The "device not revognised" error is related to USB debug mode, unless you have installed Google USB drivers.
Its not supposed to occur with debug mode=off.
Going back to stock (Leaked JVU) is explained here:
http://forum.xda-developers.com/showthread.php?t=1431596
Thanks for the link.
Going back to stock worked for a friend of mine,which came today(he has the same phone with cm7.2 rco and glitch kernel but with usb port working)by simpling entering on download mode and flashing with odin.Drivers installed (from samsung drivers folder,after installing kies)
On my phone,on download mode,or it doesnt say anything or i get on pc the message uknown device,cannot install etc.If i try to manual push the drivers it says the device cannot start.
So it must be a hardware related problem no??
In this case ,because i am still on warranty,is there any other way (for example via cwm) to put stock firmware and kernel in order to claim warranty?
Many thanks for your posts.

Categories

Resources