Hi,
I was using F1 V6 ROM on JVK for some time (flashed it with no problems using Odin and Clockwork). After some time, it started to crash more often. I triend V7 but it was even worse so I got back to V6. The only problem was often restarts and sometimes slow operation.
Yesterday I decided to switch to Cyanogen to give it a try. I did it without flashing from scratch. I just used Cyanogen 7.1 installation through Clockwork. It seemed OK untill I tried to connect my phone to PC via USB. I couldn't get any response from PC (not even a sound indicating that something was connected to USB) or Phone (no mount USB screen).
So I was able to charge my phone through USB but not to connect it to PC (tried 2 PCs, different cables, different ports). It doesn't seem like driver problem (no sign of connecting phone to PC, nothing).
I thought that it might be some problem with Cyanogen ROM. So I tried to go back to F1 V6 (wipe) through Clockwork. After doing it, I got boot loop but still showing the logo of Cyanogen (not SGSII from F1). Having no USB connection and being unable to start the phone, I tried to do recovery (I had a backup of F1 V6 from the moment before installing Cyanogen. That didn't go well either. The process stopped and left me with Samsung Galaxy S logo (no boot loop - just hanging there). I cant get into recovery mode anymore. I can only get to download mode.
So the status right now is:
Download mode - OK
USB - can't get phone to connect with PC (no signs of connection so probably not a driver problem but maybe? I tried reinstalling kies, drivers, running Odin, no sign of connected phone, USBDeview shows no Samsung or Kies or Android drivers in my system right now).
Hanging on the Samsung Galaxy S screen.
Did anyone had similar situation?
What do you advice? Any idea on a atest checking if USB hardware is fine?
Was it possible to break USB hardware or driver in phone by installing Cyanogen 7.1 on F1 V6 SGS2?
Any help would be appreciated.
Thanks
kaminkac said:
Hi,
I was using F1 V6 ROM on JVK for some time (flashed it with no problems using Odin and Clockwork). After some time, it started to crash more often. I triend V7 but it was even worse so I got back to V6. The only problem was often restarts and sometimes slow operation.
Yesterday I decided to switch to Cyanogen to give it a try. I did it without flashing from scratch. I just used Cyanogen 7.1 installation through Clockwork. It seemed OK untill I tried to connect my phone to PC via USB. I couldn't get any response from PC (not even a sound indicating that something was connected to USB) or Phone (no mount USB screen).
So I was able to charge my phone through USB but not to connect it to PC (tried 2 PCs, different cables, different ports). It doesn't seem like driver problem (no sign of connecting phone to PC, nothing).
I thought that it might be some problem with Cyanogen ROM. So I tried to go back to F1 V6 (wipe) through Clockwork. After doing it, I got boot loop but still showing the logo of Cyanogen (not SGSII from F1). Having no USB connection and being unable to start the phone, I tried to do recovery (I had a backup of F1 V6 from the moment before installing Cyanogen. That didn't go well either. The process stopped and left me with Samsung Galaxy S logo (no boot loop - just hanging there). I cant get into recovery mode anymore. I can only get to download mode.
So the status right now is:
Download mode - OK
USB - can't get phone to connect with PC (no signs of connection so probably not a driver problem but maybe? I tried reinstalling kies, drivers, running Odin, no sign of connected phone, USBDeview shows no Samsung or Kies or Android drivers in my system right now).
Hanging on the Samsung Galaxy S screen.
Did anyone had similar situation?
What do you advice? Any idea on a atest checking if USB hardware is fine?
Was it possible to break USB hardware or driver in phone by installing Cyanogen 7.1 on F1 V6 SGS2?
Any help would be appreciated.
Thanks
Click to expand...
Click to collapse
Cyanogen uses a different file system, so to get it back to a Sammy ROM you need to flash it with Odin. and cyanogen doesn't use the Sammy driver for connecting to the PC. download nexus s drivers from the Android SDK and install it.
Sent from my GT-I9000 using xda premium
OK, so how do I install these drivers when my PC can't see that I have my phone connected to USB port? There is no driver error. After connection nothing happens.
Is there a way to install these drivers on Windows 7 without actually having sgs listed on device list?
any help with that?
kaminkac said:
OK, so how do I install these drivers when my PC can't see that I have my phone connected to USB port? There is no driver error. After connection nothing happens.
Is there a way to install these drivers on Windows 7 without actually having sgs listed on device list?
any help with that?
Click to expand...
Click to collapse
Get your phone into download mode (volume down + home + power) and see if windows lists it then.
Sent from my GT-I9000 using xda premium
Thanks but it does not.
No sign of connecting phone to PC.
any ideas?
kaminkac said:
Thanks but it does not.
No sign of connecting phone to PC.
any ideas?
Click to expand...
Click to collapse
Reflash the CM7 Rom, and see if it shows up in device manager. Do you get an option on CM to share disc drives with usb plugged to the computer?
Oh, and if you have KIES installed, try remove it and remove the driver pack too (i know it affects ODIN's ability to see the phone).
Solved
Thanks for help.
I got different cable (third) and different (third) PC and somehow it worked - PC noticed connection of SGS in download mode and than it was easy.
I installed clean JVT, than CF-Root and CM 7.1 + google apps.
It seems to work fine for now.
Please close this thread.
Cheers
Related
Big problem. Suddenly my phone will not turn on. Sits at the white Galaxy S GT-I9000 screen and does not boot. When I put it into download mode and plug it into computer, its suddenly saying "USB Device Not Recognized".
What do I do? PC won't recognize it, it wont boot. can't flash it.....I'm freaking out here...
Did you flash anything to it or root it?
riwarren said:
Big problem. Suddenly my phone will not turn on. Sits at the white Galaxy S GT-I9000 screen and does not boot. When I put it into download mode and plug it into computer, its suddenly saying "USB Device Not Recognized".
What do I do? PC won't recognize it, it wont boot. can't flash it.....I'm freaking out here...
Click to expand...
Click to collapse
Hi Rick. Try to re-install samsung usb drivers. during this time, take out the battery from the phone. once finished installing the drivers, put back the battery into the phone. Go into downloading mode. Fire up odin, put in the necessary firmwares + pit files. Once done, then CONNECT your phone to the usb port of your computer.
Hope it's okay.
Edit: Let's hope that it is the computer usb drivers are corrupted. Alterntively, if you still can't do it, try it on another pc.
Nope. I was rebooting it to flash XXJPC to it, but couldnt do so because it was saying that USB message and wouldnt detect it. So I went into recovery, did a factory reset, and now it wont boot.
Another computer does the same thing *tears*
*BUMP*
Lets try a different route. I will pay a generous sum of money to anyone who offers to and does manage to fix this for me?
rick, looking at this, if your usb is not recognised, it is either the pc or the phone usb port might be damaged.
if it is a hardware issue, then use the bounty to get it fix.
I was at that same point with my vibrant. After failed attempts of getting into download mode using buttons, here's what I did.
Download and install samsung usb drivers and android sdk.
Plug into the computer and use adb to get into download mode (adb reboot download).
Then flash with odin.
Doing that worked for me when nothing else would. Try it ?
Sent from my SGH-T959 using XDA App
richan90 said:
I was at that same point with my vibrant. After failed attempts of getting into download mode using buttons, here's what I did.
Download and install samsung usb drivers and android sdk.
Plug into the computer and use adb to get into download mode (adb reboot download).
Then flash with odin.
Doing that worked for me when nothing else would. Try it ?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I can get into download mode just fine.....my pc just doesnt recognize the usb device. tried 3 differente pc's, 2 running win7 and one running xp.
Did you install usb drivers on each of the machines?
Sent from my GT-I9000 using Tapatalk
I installed the samsung USB driver executable. and I also tried to use those drivers that it installs to manually update the "unknown USB device" in device manager, but they won't take.
Try uninstalling all drivers, then stick a MicroSD in your phone before plugging it into the usb.
Assuming you have Samsung Kies in your PC, try to upgrade it at 1.5.1.10074_45.
How long do you wait the boot?? The first boot after flash is very long, wait at least 5 minutes with flashing "S".
I did not just flash anything. My phone got really hot and laggy (as I was using it while charging it via USB port) and so I rebooted phone in an attempt to resolve the lag. when I did, it would not go past the WHITE Samsung Galaxy S I9000 screen, does not get to the flashing S screen.
bump
please anyone able to help?
riwarren said:
bump
please anyone able to help?
Click to expand...
Click to collapse
if i understood you correctly, you have two separate problems:
a) your phone does not boot up
b) your phone is not recognized by any computer when plugged in
could be a coincidence, but probably is not. i'm guessing your bootloader got screwed up somehow. if it is a coincidence, it could be that your usb port on the phone is effed, or your usb cable is dead. try first using a different cable and see if your phone can be recognized by any computer. perhaps then you can go into download mode and reflash.
also, have a look at this post, might help you (although, if your usb is effed, there's not much point in trying any solution that involves your phone being connected to a computer): http://androidforums.com/780720-post3.html
EDIT: also, have your tried the obvious stuff, like pulling battery?
I ve seen many threads with the white screen problem ... it has in most cases been the drivers ... you desinstall all drivers from pc using Kies option for resinstall the drivers ... then you pull the battery off few sec (give it a min or two) then you get to download mode and you flash the beast ... dont connect your phone before launching odin or else it will not be recognized ...
for the few other people who didn't manage to fix it ... it was a hardware failure
That post you linked, is worth a try. But its for a motorola.....Where do I get my SGS bootloader to use instead?
ohh you were implying to try to use the motorola usb drivers?
bouzoubaa said:
I ve seen many threads with the white screen problem ... it has in most cases been the drivers ... you desinstall all drivers from pc using Kies option for resinstall the drivers ... then you pull the battery off few sec (give it a min or two) then you get to download mode and you flash the beast ... dont connect your phone before launching odin or else it will not be recognized ...
for the few other people who didn't manage to fix it ... it was a hardware failure
Click to expand...
Click to collapse
I never said anything about a white screen. and I am not uneducated on flashing SGS, or using Odin. Far from it. My phone was first showing USB symbol when it wasnt plugged into USB port, then phone started running really hot while charging and got really bloated like it was overheating. So I rebooted and its now force closing at the first boot animation. I can get into download mode and recovery, but will not recognize in any of the 3 computers all running different versions of windows on them, with either of my USB cables that I tried.
Hello all, I am turning to the Forums since I have spent 5 hours trying to resolve my problem.
Earlier today I installed Kies Mini on my computer in anticipation of the official AT&T Froyo. However, now my computer no longer recognizes my phone at all. It does not show up in the Device Manager, or anywhere.
I tried Uninstalling Kies Mini, Uninstalling the Drivers, Rebooting my phone. etc, etc. But Windows still will not recognize the phone as attached. It worked in the past and I would like for it to work again.
I am currently running Windows 7 64 bit. My Captivate is running Cog 3.4.
Try this:
Uninstall Kies Mini and all Drivers
Reinstall Kies Mini
Once installed turn on USB debugging on your phone and then plug it in, let it install all of the drivers.
Unplug your phone and shut it down
Once shut down activate download mode (hold up and down volume and plug in the USB) again it will install more drivers.
Once this is done unplug your phone, remove the battery and turn it back on, then restart your computer.
Uninstalled Kies Mini, and Samsung Drivers. Reboot
Installed Kies Mini.
Attached Phone to Computer. Nothing.
Also, Tried to Just boot my phone into Recovery Mode. But only boots into Clockwork Recovery. Can't Log into Stock Recovery
Update: Tried hooking up the phone to my XP machine. No Joy. XP did not recognize the device or try to install drivers.
Did you enable debugging?
Sent from my SAMSUNG-SGH-I897 using XDA App
Yes, I placed it in Debug mode. When I plug in my Phone my Title Bar Shows the USB Debugging Android indicating that USB Debugging connected, the USB icon that says Copy files to From Computer. If I click on USB, it gives me the Green Connect Android, then the Orange One. But none of my computers recognize a USB device as connected.
I have tried it with Three different cables. I'm thinking that somehow the phone is not sending some message to Windows saying "Hey, I'm connected"
Did you use the correct drivers for the phone? Can't recall of the top of my head if I can use the standard captivate drivers for windows if your on cognition..
Sent from my SAMSUNG-SGH-I897 using XDA App
I am having this exact same issue - only I updated from JH7 to Official 2.2 (for ****s n giggles) and now pc no longer recognizes phone. Went through the uninstall and reinstall and reboot.... no luck. I've never had this issue before...... ever.
I have tried almost everything i can think of. Anyone have any suggestions?
Sent from my SAMSUNG-SGH-I897 using XDA App
Not in device manager
I have what appears to be a soft brick. I was running the i9000 drivers. I was trying to install the i897. At first Odin recognized my phone and I began to download. The Odin bootloader flash failed. No my computer (Win 7 64 bit) does not even see my phone. Nothing in device manager, not even an unrecognized device.
I can get my phone into download mode. Does anyone have an idea how I can get windows to see me again?
From my experience as long as you are in download mode and have odin opened up it when you connect it, odin should find the phone no problem for you to be able to flash something new to it.
davncari said:
I have what appears to be a soft brick. I was running the i9000 drivers. I was trying to install the i897. At first Odin recognized my phone and I began to download. The Odin bootloader flash failed. No my computer (Win 7 64 bit) does not even see my phone. Nothing in device manager, not even an unrecognized device.
I can get my phone into download mode. Does anyone have an idea how I can get windows to see me again?
Click to expand...
Click to collapse
Have you rebooted the PC? Try to reinstall the drivers again. I had to reinstall the nexus s drivers but I have read some need to reinstall kies to get the drivers to work. Just keep at it. Try other USB ports. My phone wouldn't be recognized for about two weeks with trying everything. I tried new USB cables, drivers and all. Then finally it kind of worked and I went from download mode with a jig to phone!PC and then it took another reboot of the laptop and phone was able to get flashed again via the phone!PC screen. Just keep trying is all I can say.
Sent from My KickAss Captivated CM7 OC'd 1.5Ghz/Undervolted
Hi!
After searching the forums for a while I did not find a thread exactly matching my problem, so if I've overseen it, please just point me there.
To my problem:
I did a very stupid mistake, flashing a new custom ROM with a different kernel (as usual, cooked in Docs Kitchen) without converting back the lagfix. So I ended up with a non-booting phone - so far, so bad. Note to myself: Never flash a phone during the carnival weekend again.
So I booted into download mode and tried to recover it via Odin, but here I got my really bad surprise: USB device is not recognized, thus I Odin does not see the phone.
I tried 4 different PCs with Win7 or XP, a Linux desktop and a Macbook. I also tried 5 different USB cables (they all work with other smartphones like the Desire and the HD2). Wherever I stick the phone in, it is not recognized (code 10/code 43 in Win7). I used the stand-alone-drivers from the sticky forum thread here, and also most recent Kies versions, always the same: USB device not recognized.
Does anybody have an idea how to revive the USB connectivity? I'm almost at the point to send it in for repairs...
Or can someone elaborate how I could have killed USB with corrupting the ROM? I've to admit I do not really understand how these two are connected.
--Jens
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
formatted to ext4 without any backup
I did a very stupid mistake too. Got darky's rom 9.3., installed i, everything worked great(really awesome thing), then i wnt to recovry mode and entered tthe speedmod and it showed mr that my phone has rtf files system not EXT4 as it should be, thou i installed the speed mode. then i chose to repartition it to ext4 but i didn't choose the backup. Just clicked to format the sd. It did formatted to EXT4, rebooted, i saw the darky's rom logo and the the phone vibrated and the logog of the droid just flashed. I tried to enter recovery mode-didn't load. Started the download mode connexted to pc used ODIN 1.7 with PDA I9000XXJPY.tar, MODEM I9000XXJPY.tar, GT-I9000-CSC-MULTI-OXAJPY-LITE.tar s1_odin_20100512.pit.
The phone has started, appeared teh stok galaxy s logo and it's just flashing. Help needed. Don,t know what to do know. I have galayx s i9000 european version.
somehow i've managed to install new firmare 2.2.1 /I9000XXJPY-baseband /2.6.32.9 [email protected] #1-kernel version, but z4root isn't working. When i start permanent root the programm ends on aquiring root shell, the debug mode is on
Got it all running, installed Darky's rom 9.3. Thanks anyway.
theduckking said:
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
Click to expand...
Click to collapse
Yep, I can boot into download and recovery modes, but that's it.
The only apparent change in the new custom ROM was the kernel.
I also cannot really access my external SD card (it shows me some phantom files, but not the actual content of the SD), otherwise I'd try to recover it this way.
I agree with the hardware issue, if it wouldn't have coincided with the flash procedure...anyway, I think I'll send it in for repairs if I don't get it to run on this sunday.
I have the exact same problem, except that I can access my external SD. I got the problem after upgrading to Darkys Rom 9.3 the usual way, but switched from Speedmod to Voodoo. After that update, my USB didn't work anymore.
I can't get neither Xp or Win 7 to recognize my phone. USB device not recognized, and tried all the tricks. Reinstalling Kies and drivers, switching between the different modes (storage, kies media, ask, debug...) But still no USB connection.
I updated to darkys 9.5 (transferring the rom using bluetooth, and updating using CWM), but still it doesn't work.
Can get it into download mode, but still can't connect using USB and Odin.
HELP!
Did anybody ever find a solution for this?
European version of I9000, bought in Denmark. No Simlock
Same thing here after installing JV1 + Ultibread Rom 1.4... Still no solution
*shameless push*
Any solution here? I dont have that problem, but it sounds too scary to not have a working solution :S
Same prob here! Any news?
Any solution? I have the same problem.
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
bassem8246 said:
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
Click to expand...
Click to collapse
But if you are in download mode on your fone you'd rather should have a look at your configuration on the computer. Because the fone still can be flashed if the symbol for download still appears.
- Kies is shut down while ODIN is active?
- latest Samsung USB driver installed?
- Odin started with Admin?
Btw. did you try to get into recovery mode? Maybe this also still is working as the partition is quite small and chance high that it was flashed w/o faults. So you may be able to flash a zipped ROM rather than a tarball for Odin.
USB Not working when Phone plugged in... try these..
Unplug Device from PC..
Windows go to Device Manager...
Scroll down to Universal serial bus Controllers
Start with the top one and work your way down ..uninstall them all..
When done reboot Computer and let it install them all.. then try again
2.Settings --> USB Setings (under wireless & network may differ depending on Rom used) --> Try other settings Mass storage
3.Different USB ports on PC
4.Uninstall KIES from PC (reboot PC to take effect) and Reboot and just install samsung USB drivers....
5.Using windows type in msconfig in Start>Run box... windows will pop up and untick KIES from STARTUP TAB
Apply to take effect and restart machine.. try using ODIN to Flash ROM
I myself only use the Samsung USB drivers and ODIN never use KIES
or ...Check my signature and try SD formatter
My SGS isn't bricked. But lately after I flashed a deodexed 2.3.3 ROM, I have a hard time connecting my USB (USB not recognized). This afternoon, my phone jammed and won't boot (Stuck in Samsung Galaxy S I9000 Screen). I can't enter the recovery mode either for no reason (used to be able to).
Now I can't flash a stock ROM because my USB isn't recognized and recovery mode is unaccessible too. Trying to install the drivers for the USB now. Anyway as it's installing, any other ways to bring my phone back?
Flash a rom through odin. You could try darky's 9.2 ressurection edition.
The problem now is I could not flash with Odin because my USB isn't working
smiles.smiley said:
My SGS isn't bricked. But lately after I flashed a deodexed 2.3.3 ROM, I have a hard time connecting my USB (USB not recognized). This afternoon, my phone jammed and won't boot (Stuck in Samsung Galaxy S I9000 Screen). I can't enter the recovery mode either for no reason (used to be able to).
Now I can't flash a stock ROM because my USB isn't recognized and recovery mode is unaccessible too. Trying to install the drivers for the USB now. Anyway as it's installing, any other ways to bring my phone back?
Click to expand...
Click to collapse
seriously try using other computer or laptop.. install the required drivers on your friends computer and then try to flash a different rom via odin
tried that. on different comp. same problem. USB not recognized with the drivers installed
I guess this is the problem. When I can't boot my phone, I did a backup restore. Maybe something is messed up and drivers don't recognize my phone as Samsung Galaxy S anymore. Anyway to force it to recognize?
http://www.nirsoft.net/utils/usb_devices_view.html
REMOVE USB DEVICES .
USB connection must be a motherboard connector .
jje
I'm sorry for being a noob. I've downloaded USBDeview. I should remove USB devices and? What do i do after that?
My USB device is Not Recognized. will it show on USBDeview?
Shows old usb drivers delete the lot on that port .
jje
Deleted everything. Plugged in my SGS in Downloading Mode. Still don't get anything.
smiles.smiley said:
Deleted everything. Plugged in my SGS in Downloading Mode. Still don't get anything.
Click to expand...
Click to collapse
if you can go into download mode then you surely can get it flashed with odin ..
try downloading the drivers again and then installing again and then try again....
... if everything fails then you should send it to the service center
Try unplugging and plugging the usb repeatedly. I've had this happen before, and I was able to get the phone recognised by doing this.
Okay a little backstory:
I was on an early version of CM9 but as i am selling the phone i decided to put a more stable version of it on there and downloaded CM7 -stable.
I flashed this in CWM and it worked fine.
I gave it a quick test and noticed all the google apps were missing, most importantly the market. So i booted into recovery and realised i had forgotten to put the zip on the SD card.
I then went into mounts and mounted USB, nothing happened...
From that point onwards the phone would not talk to the PC. even if i booted up into the phone, it would just show it as charging. I could not find any options in the menus for USB options.
After some extensive reading, i tried a few things, none of them had worked. I found a post mentioning some kernels have issues with USB, so i downloaded the recommended one and flashed it in CWM.
After rebooting, CWM was now orange and not blue and the option to flash from external card has gone.
I have also done some digging and there is a good posibility that the kernal that i flashed was for the GT I9000 (which is the american one, right?)
So as it is at the moment:-
I can get into CWM.
I can get into download mode through the 3 button combo.
I can get into download mode using home made jig.
I can boot the phone, but it boot loops.
I can not get the phone to be detected on the pc.
Things i have checked:
Cable will connect other phones.
Tried different cable to be sure.
Phone used to be detected, but downloaded drivers through kies again to be sure.
Closed Kies using task manager.
Nothing is coming up in network connections in device manager when phone is connected.
I'm out of ideas now, so £10 PayPal donation for anyone that comes up with the solution to fix it
If i can get it detected, i can use Odin to flash what i want.
Sounds like a drivers problem. You may need the 'Google driver' developer.android.com/sdk/win-usb.html
When I had bootloops when I first installed CM9 I used heimdall to flash a the stock CM9 kernel. This gave me back CWM.
heimdall flash --kernel 'kernel.zip'
In the commandline.
Thanks for that,
I already had the Google USB drivers from when i installed the SDK to make some apps.
So i then gave Heimdall a try (Graphical Version), it seemed to suffer the same problem.
Reporting "Failed to detect compatible download-mode device."
I seem to remember the GUI saying I didn't have the correct drivers and it downloaded them for me.
The other thing worth a try is changing the USB port and reinstalling the correct drivers on that port.
I've not seen anything like that, it has not asked me for any drivers.
It's like the phone is not connected at all. nothing will detect it, i have even tried it on another PC.
Sorry, I'm not sure what you mean by installing on a port.
Well sometimes changing USB port will allow you to install new drivers. Although if you've tried it in another computer and it doesn't work then changing port may not help.
Does the phone appear in device manager when it's connected and in download mode?
Nope. Not coming up at all in the device manager. It didn't when it was booting fine. And it still doesn't in download mode. :-( I'm thinking the usb connector on the phone might be faulty.
But it was working up until trying to mount the USB in CWM
Sent from my GT-N7000 using XDA App
I don't suppose you have access to a Linux PC do you? Windows USB drivers are notoriously sucky. If you could plug it into a Linux PC and type 'lsusb' at a command line, that would at least show you that the device is really there.
I think I have a spare pc kicking around that I could use. I'll give it a go when I get home tonight.
Sent from my GT-N7000 using XDA App
Remove all the drivers completely from device manager for Samsung, then install fresh drivers and connect the cable when in download mode, hopefully it will recognize it
Are you sure the connector is clean? e.g. maybe there's dust in it.
I had that problem once, the connector was full of fabric fibers from some coat's pocket I had the phone in.
Suggestion 1 (Linux): I installed ubuntu, did not detected anything to even install any drivers. Detected my new phone fine.
Suggestion 2 (Uninstall drivers from device manager): I could not find any drivers named with the name Samsung in there.
Suggestion 3 (Clean port): I have some compressed air that i sprayed inside, it does look pretty clean and will continue to charge but still not connection on the pc.
To install the drivers for heimdall you have to run zdiag from inside the driver folder. Had to do this earlier on, the phone the other appeared as something other than Samsung composite usb or whatever it normally says
I tried this, and it displayed 9 devices after selecting show all. I seemed to recognise all of the items in the menu.
To be sure, I then disconnected the phone and re ran it to see if one of the items were missing, but it was the same number.
I too had problem with the usb connection on my i9000, and I was pretty sure my usb connector on the phone is somewhat damaged since it sometimes can only go to charging mode without being detected by my pc as a usb device. CWM instal is fine but ODIN can only detect the phone without able to flash the rom to the phone. The flashing will always stuck at the message "Setting Up Connection", I waited for 15 minutes and the flashing will eventually died. I retry the odin flash for 40 to 50 times and eventually the flashing will go through one time. Tried heidmall command line and the result is the same.
I have problem with Odin in the past. I bought a new laptop, running Win7 64 bit. Installed Samsung Kies to install the correct USB drivers for the phone. Then made sure that Kies wasn't running in the background. So tried using Odin. Odin was detecting the phone, but it was hanging at initialising connection. Odin was working fine on my old laptop running Win7 32bit. Long story short, I was having a few issues with my new laptop, reinstalled Win7 64bit, now Odin is working fine, have flashed the phone a few times using the new computer.
After flashing which kernel you started facing this problem?
Wipe ur phone,re-flash CM7(flash the nightly 181,it's completely stable),uninstall KIES,uninstall old usb drivers,install these usb drivers http://forum.xda-developers.com/showthread.php?t=961956 ,check that USB storage mode is set as Mass Storage and then connect your phone. Also try enabling/disabling USB debugging
lovedonator said:
After flashing which kernel you started facing this problem?
Wipe ur phone,re-flash CM7(flash the nightly 181,it's completely stable),uninstall KIES,uninstall old usb drivers,install these usb drivers http://forum.xda-developers.com/showthread.php?t=961956 ,check that USB storage mode is set as Mass Storage and then connect your phone. Also try enabling/disabling USB debugging
Click to expand...
Click to collapse
The point at which i could no longer mount the USB was when i selected "mount usb" from CWM. I later installed a new kernal which downgraded my CWM, removing the install from external SD option.
So I cant flash a re-flash a rom unless i can it onto the phone which without the USB working is near impossible.
Xyis said:
The point at which i could no longer mount the USB was when i selected "mount usb" from CWM. I later installed a new kernal which downgraded my CWM, removing the install from external SD option.
So I cant flash a re-flash a rom unless i can it onto the phone which without the USB working is near impossible.
Click to expand...
Click to collapse
You can directly download the ROM on your internal sd using dolphin browser or opera mobile
I can't do that either as the phone is currently boot looping.
Sent from my GT-N7000 using XDA App