Any Other Way To Bring My Phone Back To Life - Galaxy S I9000 Q&A, Help & Troubleshooting

My SGS isn't bricked. But lately after I flashed a deodexed 2.3.3 ROM, I have a hard time connecting my USB (USB not recognized). This afternoon, my phone jammed and won't boot (Stuck in Samsung Galaxy S I9000 Screen). I can't enter the recovery mode either for no reason (used to be able to).
Now I can't flash a stock ROM because my USB isn't recognized and recovery mode is unaccessible too. Trying to install the drivers for the USB now. Anyway as it's installing, any other ways to bring my phone back?

Flash a rom through odin. You could try darky's 9.2 ressurection edition.

The problem now is I could not flash with Odin because my USB isn't working

smiles.smiley said:
My SGS isn't bricked. But lately after I flashed a deodexed 2.3.3 ROM, I have a hard time connecting my USB (USB not recognized). This afternoon, my phone jammed and won't boot (Stuck in Samsung Galaxy S I9000 Screen). I can't enter the recovery mode either for no reason (used to be able to).
Now I can't flash a stock ROM because my USB isn't recognized and recovery mode is unaccessible too. Trying to install the drivers for the USB now. Anyway as it's installing, any other ways to bring my phone back?
Click to expand...
Click to collapse
seriously try using other computer or laptop.. install the required drivers on your friends computer and then try to flash a different rom via odin

tried that. on different comp. same problem. USB not recognized with the drivers installed

I guess this is the problem. When I can't boot my phone, I did a backup restore. Maybe something is messed up and drivers don't recognize my phone as Samsung Galaxy S anymore. Anyway to force it to recognize?

http://www.nirsoft.net/utils/usb_devices_view.html
REMOVE USB DEVICES .
USB connection must be a motherboard connector .
jje

I'm sorry for being a noob. I've downloaded USBDeview. I should remove USB devices and? What do i do after that?

My USB device is Not Recognized. will it show on USBDeview?

Shows old usb drivers delete the lot on that port .
jje

Deleted everything. Plugged in my SGS in Downloading Mode. Still don't get anything.

smiles.smiley said:
Deleted everything. Plugged in my SGS in Downloading Mode. Still don't get anything.
Click to expand...
Click to collapse
if you can go into download mode then you surely can get it flashed with odin ..
try downloading the drivers again and then installing again and then try again....
... if everything fails then you should send it to the service center

Try unplugging and plugging the usb repeatedly. I've had this happen before, and I was able to get the phone recognised by doing this.

Related

[Q] Unknown device - Samsung Galaxy S

Hello,
My Samsung Galaxy S is listed as Unknown Device.
It started after an update to 2.2 via Kies and i did that with the regedit exploration. That was the 2.2 beta and then i updated it again with the official release this time also with the regedit exploit. I have formated the internal SD (i cant dismount it cause im on froyo i guess? atleast there is no option about it). Factory reset and so on.
Reinstalled kies 5 times, installed USB drivers again and again. I have tried it on different platforms with both XP (32-bit), Vista (32-bit) and Slackware Linux (32-bit). The computors just cant find drivers for the device.
I have tried all the different usb options in the phone settings nothing happends. I think i have tried everything that can be found here and on google...
The phone is Rooted and im now on PDA: I9000XWJP6, PHONE: I9000XXJPM, CSC: I9000XEEJP4.
Build Info: 2010. 10.
I believe the main thing here is that i dont even get the MTP application in the phone to recognize that a USB connection have been initialized. Nothing happend in the phone when i connect the USB no MTP screen or anything, just chargeing. I have tried 2 diffrent usb cords both that worked before so its not that.. The computor just says unknown device and Kies dont notice anything at all.
I have tried installing another firmware with Odin in Download mode and stil unknown device.
So i believe the phone have, in some way lost its internal usb drivers? I have also noticed that the battery "100% charged" icon does not disapear after i disconnect the usb or the charger. Also sometimes the icon continues to charge after i disconnect. Sometimes when i turn the phone of it starts by itself after like 2 min.
Anyways! What i was wondering is if there is a way to install an official firmware via update.zip volume-up+home+power?
When i try to install a customized rom with update.zip it says:
E:signature verification failed Installation aborted.
Cause of 3e bootloader? But i think its best to maby have a good stable firmware before i go customized?
So any help would be appreciated!!! heeeeeeeelp.....
Try installing theses drivers x64 x86 depending on what operating system you're on.
If that doesn't work try going into download mode and connect with odin. With the recovery problem you need to flash 2e recovery
You can also try and download and flash the latest version firmware to your phone and see if that helps.
Good luck and tell me how it goes
Serikiito said:
Try installing theses drivers x64 x86 depending on what operating system you're on.
If that doesn't work try going into download mode and connect with odin. With the recovery problem you need to flash 2e recovery
You can also try and download and flash the latest version firmware to your phone and see if that helps.
Good luck and tell me how it goes
Click to expand...
Click to collapse
Hi m8!
Thx for the reply!
I have allready tried installing those drivers doesnt work for me.
I have tried Download mode with Odin to, it still says Unknown Device in Windows (i have Vista 32-bits, but tried it on XP and Linux to).
So anything that has to do with a USB-connection seems impossible at the moment...
The phone dont start the MTP application at all and windows dont install the drivers, it just says unknown device when trying to install.
I just unistalled Kies and removed everything from regedit with "kies" in it and then rebooted and downloaded a new fresh Kies file. Installed it and rebooted again while i wiped the phone, formated the SD and did a factory reset.. still "Unknown Device" :[
The problem seems to be the software in the phone.. so my question is: Is there is anyway to update or flash the firmware in the phone without any USB connection?
Is there maby any way to get 2e recovery mode without usb connection?
Endombed said:
Is there maby any way to get 2e recovery mode without usb connection?
Click to expand...
Click to collapse
There is an app in the Android Development section here that allows you to flash a kernel within Android. Never tried it myself but I believe it is now stable and you could use it to flash CF-Root internally
EDIT: Here you go...
http://forum.xda-developers.com/showthread.php?t=877444
Have you tried recovery mode? Big yellow triangle with Android man holding shovel. Then connect to PC with Kies running and click on firmware update button.
Thx man!
But it seems that i dont have root access anymore, so cant use that app either :/ i think im a hopeless case.. :[
Tehpriest said:
Have you tried recovery mode? Big yellow triangle with Android man holding shovel. Then connect to PC with Kies running and click on firmware update button.
Click to expand...
Click to collapse
Yes man.. i get the same thing with the Yellow friend that says "Do not turn of target!!!"..
"One of the USB devices attached to this computor has malfunctioned. And Windows does not recognize it."
and also
"Unknown Device Installed
The software for this device has been successfully installed.
Unknown device - - Ready to use"
Are you connecting through a hub or direct to the back port of the PC. A hub will cause problems. If direct then try this.. Plug in and wait till you get the unrecognised device info. go into device manager, identify the device it will either say Samsung or unknown device. right click and remove device say yes if it asks if you want to delete the driver. now restart the pc after unplugging the usb then after it has fully restarted and connected to the net plug it back in again. Hopefully it will look on the net for the driver and install the correct one.
Tehpriest said:
Are you connecting through a hub or direct to the back port of the PC. A hub will cause problems. If direct then try this.. Plug in and wait till you get the unrecognised device info. go into device manager, identify the device it will either say Samsung or unknown device. right click and remove device say yes if it asks if you want to delete the driver. now restart the pc after unplugging the usb then after it has fully restarted and connected to the net plug it back in again. Hopefully it will look on the net for the driver and install the correct one.
Click to expand...
Click to collapse
Yep tried that to.. i have even tried it on 3 diffrent computers 2 of them in all usb ports.. and everything els works that was connected in those ports.
I dont think its the software in the computer that is the problem.. :/
I believe there is some internal (in the phone) usb firmware problem, if thats possible?
i have exactly the same problem my usb by giving uknown device (i used it at 3 computer with kies software) it seems usb not working anywhere.
I believe our only solution is to find a way to install e2 recovery via the phone.
I have this problem also.
My SGS is rooted.
I tried everything. Googled many hour.
I din't know what more to do.
I have "Android system recovery <2e>" Is this an advantage?
I turned the phone in to my provider. this message is what i got from the repairservice.
Repair Details: The phone's charge connector is moisture/water -damaged, can not be repaired. returned without action.
WTF?!! i have been really careful with the phone. The only thing i can think of is that it has been really cold where i live (Sweden) and i had it in my pocket.. but i mean cmon! it goto withstand that!
I guess i have to wait for samsung to make it possible to update firmware via Wifi.
Neon2 said:
I have this problem also.
My SGS is rooted.
I tried everything. Googled many hour.
I din't know what more to do.
I have "Android system recovery <2e>" Is this an advantage?
Click to expand...
Click to collapse
With Recovery 2e i think it can be possible to update your phones firmware with the update.zip file but i think you need to have your phone rooted.
Repair Details: The phone's charge connector is moisture/water -damaged, can not be repaired. returned without action.
All makes of Smartphone seem to suffer from, condensation problem .
Or at least thats what the service centres
jje
Endombed said:
With Recovery 2e i think it can be possible to update your phones firmware with the update.zip file but i think you need to have your phone rooted.
Click to expand...
Click to collapse
I think so. I have my phone rooted and also ROM Flash Manager installed. The issue now is to find an european stock image to flash compatible with ROM Flash Manager
I looked for the stock firmware image (my phone has JF3) but can't find where.
Anyone?
I don't want to flash a cooked image just in case I have to ship the phone to the repair service.
Hello, I have exactly the same problem.
My SGS is unrooted, due to warranty, and alway keep it with maximum care (it is not a free phone...).
Symptoms are the same:
-It started after an update to 2.2 via Kies
-Absolutely unrecognized by windows (xp32 and win764) anymore
-battery "100% charged" icon does not disappear after i disconnect the usb or the charger
-turning the phone off it starts by itself after like 2 min.
More: incredible but sometimes when connected to car charger, I have the message "usb connected".
Already tried all possible (unrooted) tricks.
I believe usb internal drivers (if any) are corrupted (maybe by moisture?), how to reinstall them?
Maybe usb connector damaged; I have moved a little bit with a scrwdrvr the usb connector plate and clean with air and a thin blade but no result.
I will bring to service, as warranty is still valid, but surely they will discard me (I am optimist)
If there is any solution, please post it.
Hello,
Same here, can't connect phone to pc, mtp dont start on phone after connect it on pc !
Anyone know how flashback stock rom if its possible ?
Hi someone have a stock firmware for flash it in to recovery ?
I think i will try send the phone to samsung after reflashing for see what the guys from samsupport says about this !
Yes, if a part of firmware has been corrupted (with usb info for pc recognition) maybe the solution is to reinstall entire rom.
How to find a stock rom?
How to reinstall rom from SD card in a non rooted phone with no usb connection?

[Q] Semi-bricked, USB not recognized, doesn't even charge

Hi!
After searching the forums for a while I did not find a thread exactly matching my problem, so if I've overseen it, please just point me there.
To my problem:
I did a very stupid mistake, flashing a new custom ROM with a different kernel (as usual, cooked in Docs Kitchen) without converting back the lagfix. So I ended up with a non-booting phone - so far, so bad. Note to myself: Never flash a phone during the carnival weekend again.
So I booted into download mode and tried to recover it via Odin, but here I got my really bad surprise: USB device is not recognized, thus I Odin does not see the phone.
I tried 4 different PCs with Win7 or XP, a Linux desktop and a Macbook. I also tried 5 different USB cables (they all work with other smartphones like the Desire and the HD2). Wherever I stick the phone in, it is not recognized (code 10/code 43 in Win7). I used the stand-alone-drivers from the sticky forum thread here, and also most recent Kies versions, always the same: USB device not recognized.
Does anybody have an idea how to revive the USB connectivity? I'm almost at the point to send it in for repairs...
Or can someone elaborate how I could have killed USB with corrupting the ROM? I've to admit I do not really understand how these two are connected.
--Jens
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
formatted to ext4 without any backup
I did a very stupid mistake too. Got darky's rom 9.3., installed i, everything worked great(really awesome thing), then i wnt to recovry mode and entered tthe speedmod and it showed mr that my phone has rtf files system not EXT4 as it should be, thou i installed the speed mode. then i chose to repartition it to ext4 but i didn't choose the backup. Just clicked to format the sd. It did formatted to EXT4, rebooted, i saw the darky's rom logo and the the phone vibrated and the logog of the droid just flashed. I tried to enter recovery mode-didn't load. Started the download mode connexted to pc used ODIN 1.7 with PDA I9000XXJPY.tar, MODEM I9000XXJPY.tar, GT-I9000-CSC-MULTI-OXAJPY-LITE.tar s1_odin_20100512.pit.
The phone has started, appeared teh stok galaxy s logo and it's just flashing. Help needed. Don,t know what to do know. I have galayx s i9000 european version.
somehow i've managed to install new firmare 2.2.1 /I9000XXJPY-baseband /2.6.32.9 [email protected] #1-kernel version, but z4root isn't working. When i start permanent root the programm ends on aquiring root shell, the debug mode is on
Got it all running, installed Darky's rom 9.3. Thanks anyway.
theduckking said:
Hi Amokbunny
You get into download mode but the PC won't recognize the phone?
That's messy and I can think of nothing that could have done that. you did not change the bootloader did you (flashed a full samsung ROM containing a bootloader, for example VJ1)?
If not I guess it's a hardware issue.
Click to expand...
Click to collapse
Yep, I can boot into download and recovery modes, but that's it.
The only apparent change in the new custom ROM was the kernel.
I also cannot really access my external SD card (it shows me some phantom files, but not the actual content of the SD), otherwise I'd try to recover it this way.
I agree with the hardware issue, if it wouldn't have coincided with the flash procedure...anyway, I think I'll send it in for repairs if I don't get it to run on this sunday.
I have the exact same problem, except that I can access my external SD. I got the problem after upgrading to Darkys Rom 9.3 the usual way, but switched from Speedmod to Voodoo. After that update, my USB didn't work anymore.
I can't get neither Xp or Win 7 to recognize my phone. USB device not recognized, and tried all the tricks. Reinstalling Kies and drivers, switching between the different modes (storage, kies media, ask, debug...) But still no USB connection.
I updated to darkys 9.5 (transferring the rom using bluetooth, and updating using CWM), but still it doesn't work.
Can get it into download mode, but still can't connect using USB and Odin.
HELP!
Did anybody ever find a solution for this?
European version of I9000, bought in Denmark. No Simlock
Same thing here after installing JV1 + Ultibread Rom 1.4... Still no solution
*shameless push*
Any solution here? I dont have that problem, but it sounds too scary to not have a working solution :S
Same prob here! Any news?
Any solution? I have the same problem.
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
bassem8246 said:
same problem my phone is bricked while flashing a stock rom the windows disconnected the phone while flashing
ended with device not recognized even in download mode
Click to expand...
Click to collapse
But if you are in download mode on your fone you'd rather should have a look at your configuration on the computer. Because the fone still can be flashed if the symbol for download still appears.
- Kies is shut down while ODIN is active?
- latest Samsung USB driver installed?
- Odin started with Admin?
Btw. did you try to get into recovery mode? Maybe this also still is working as the partition is quite small and chance high that it was flashed w/o faults. So you may be able to flash a zipped ROM rather than a tarball for Odin.
USB Not working when Phone plugged in... try these..
Unplug Device from PC..
Windows go to Device Manager...
Scroll down to Universal serial bus Controllers
Start with the top one and work your way down ..uninstall them all..
When done reboot Computer and let it install them all.. then try again
2.Settings --> USB Setings (under wireless & network may differ depending on Rom used) --> Try other settings Mass storage
3.Different USB ports on PC
4.Uninstall KIES from PC (reboot PC to take effect) and Reboot and just install samsung USB drivers....
5.Using windows type in msconfig in Start>Run box... windows will pop up and untick KIES from STARTUP TAB
Apply to take effect and restart machine.. try using ODIN to Flash ROM
I myself only use the Samsung USB drivers and ODIN never use KIES
or ...Check my signature and try SD formatter

Update gone wrong?

I tried to flash stock 2.3.6 xwjvz and odin hanged at setup connection and everything i try it just hang's at setup connectio.. i cant flash anything... strange thing that the phone is soft bricked and shows that sign with phone and computer but it still wants to go into download mode normali???
II tried this thing so far... different odin, reinstall usb drivers and going to download mode via usb jig...
krimos said:
I tried to flash stock 2.3.6 xwjvz and odin hanged at setup connection and everything i try it just hang's at setup connectio.. i cant flash anything... strange thing that the phone is soft bricked and shows that sign with phone and computer but it still wants to go into download mode normali???
II tried this thing so far... different odin, reinstall usb drivers and going to download mode via usb jig...
Click to expand...
Click to collapse
Actually the same happened to my SGS & ended up at samsung service center, got it's Mobo replaced ..!
Still i Dunno what caused the issue..
Did you try a different USB port? Or Different USB cable? Also what version of ODIN are you running?

Galaxy TAB P1000 NOT Detecting in ODIN

Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it

[Q] Unkown device on bricked phone

Hello, my Samsung Galaxy S GT-i9003 was working fine yesterday, but now it stays stuck on the samsung logo when booting. I'm trying to flash it, the thing is, I can't get my computer to detect my phone, it shows up as an unkown device. I tried a factory reboot etc.. didn't work, and I can't even use it as a mass storage device since it's bricked. I used all the newest drivers, the newest version of kies but it still doesn't work.
I'm on windows 7/64 bit btw.
Thank you in advance.
Are you able to enter into download mode? (hold volume down + home + power)
If not, You can try to make (or buy) a JIG which will force download mode and you can flash a new ROM with Odin
Regards
I can enter in download mode, the thing is, my computer detects my phone as an "unknown device" and it isn't recognised by Odin either, which means I can't flash it.
are you sure the drivers are installed correctly? I recently had problems with the USB cable.. try another one and if possible, other PC....
I installed many times the drivers, using kies or without kies, the result is just the same, maybe it's the cable.
Try to change the cable and the USB port. Last week I tried to update a Motorola Atrix and the same thing happened, unknown device. Then I changed the USB Cable and voila... worked !
Let me know if it works....
Regards
just wondering if you have resolved this yet ? I have same problem tried all usb drivers i can find , 5 different computers , jig , odin still not detect and windows show unknown device detected.
Sent from my Dell Streak using XDA
Guys I had the same problem. After trying many pc, drivers, cables combinations I came to a conclusion that the usb port on the phone itself must be damaged. After taking a close look, I saw some of the gold contacts damaged/missing.. That might be the case with your phone aswell. Look at the pins and if yo usee some visual damage you know what the problem is. Even if you dont see it, it still might be a problem.

Categories

Resources