Related
Big problem. Suddenly my phone will not turn on. Sits at the white Galaxy S GT-I9000 screen and does not boot. When I put it into download mode and plug it into computer, its suddenly saying "USB Device Not Recognized".
What do I do? PC won't recognize it, it wont boot. can't flash it.....I'm freaking out here...
Did you flash anything to it or root it?
riwarren said:
Big problem. Suddenly my phone will not turn on. Sits at the white Galaxy S GT-I9000 screen and does not boot. When I put it into download mode and plug it into computer, its suddenly saying "USB Device Not Recognized".
What do I do? PC won't recognize it, it wont boot. can't flash it.....I'm freaking out here...
Click to expand...
Click to collapse
Hi Rick. Try to re-install samsung usb drivers. during this time, take out the battery from the phone. once finished installing the drivers, put back the battery into the phone. Go into downloading mode. Fire up odin, put in the necessary firmwares + pit files. Once done, then CONNECT your phone to the usb port of your computer.
Hope it's okay.
Edit: Let's hope that it is the computer usb drivers are corrupted. Alterntively, if you still can't do it, try it on another pc.
Nope. I was rebooting it to flash XXJPC to it, but couldnt do so because it was saying that USB message and wouldnt detect it. So I went into recovery, did a factory reset, and now it wont boot.
Another computer does the same thing *tears*
*BUMP*
Lets try a different route. I will pay a generous sum of money to anyone who offers to and does manage to fix this for me?
rick, looking at this, if your usb is not recognised, it is either the pc or the phone usb port might be damaged.
if it is a hardware issue, then use the bounty to get it fix.
I was at that same point with my vibrant. After failed attempts of getting into download mode using buttons, here's what I did.
Download and install samsung usb drivers and android sdk.
Plug into the computer and use adb to get into download mode (adb reboot download).
Then flash with odin.
Doing that worked for me when nothing else would. Try it ?
Sent from my SGH-T959 using XDA App
richan90 said:
I was at that same point with my vibrant. After failed attempts of getting into download mode using buttons, here's what I did.
Download and install samsung usb drivers and android sdk.
Plug into the computer and use adb to get into download mode (adb reboot download).
Then flash with odin.
Doing that worked for me when nothing else would. Try it ?
Sent from my SGH-T959 using XDA App
Click to expand...
Click to collapse
I can get into download mode just fine.....my pc just doesnt recognize the usb device. tried 3 differente pc's, 2 running win7 and one running xp.
Did you install usb drivers on each of the machines?
Sent from my GT-I9000 using Tapatalk
I installed the samsung USB driver executable. and I also tried to use those drivers that it installs to manually update the "unknown USB device" in device manager, but they won't take.
Try uninstalling all drivers, then stick a MicroSD in your phone before plugging it into the usb.
Assuming you have Samsung Kies in your PC, try to upgrade it at 1.5.1.10074_45.
How long do you wait the boot?? The first boot after flash is very long, wait at least 5 minutes with flashing "S".
I did not just flash anything. My phone got really hot and laggy (as I was using it while charging it via USB port) and so I rebooted phone in an attempt to resolve the lag. when I did, it would not go past the WHITE Samsung Galaxy S I9000 screen, does not get to the flashing S screen.
bump
please anyone able to help?
riwarren said:
bump
please anyone able to help?
Click to expand...
Click to collapse
if i understood you correctly, you have two separate problems:
a) your phone does not boot up
b) your phone is not recognized by any computer when plugged in
could be a coincidence, but probably is not. i'm guessing your bootloader got screwed up somehow. if it is a coincidence, it could be that your usb port on the phone is effed, or your usb cable is dead. try first using a different cable and see if your phone can be recognized by any computer. perhaps then you can go into download mode and reflash.
also, have a look at this post, might help you (although, if your usb is effed, there's not much point in trying any solution that involves your phone being connected to a computer): http://androidforums.com/780720-post3.html
EDIT: also, have your tried the obvious stuff, like pulling battery?
I ve seen many threads with the white screen problem ... it has in most cases been the drivers ... you desinstall all drivers from pc using Kies option for resinstall the drivers ... then you pull the battery off few sec (give it a min or two) then you get to download mode and you flash the beast ... dont connect your phone before launching odin or else it will not be recognized ...
for the few other people who didn't manage to fix it ... it was a hardware failure
That post you linked, is worth a try. But its for a motorola.....Where do I get my SGS bootloader to use instead?
ohh you were implying to try to use the motorola usb drivers?
bouzoubaa said:
I ve seen many threads with the white screen problem ... it has in most cases been the drivers ... you desinstall all drivers from pc using Kies option for resinstall the drivers ... then you pull the battery off few sec (give it a min or two) then you get to download mode and you flash the beast ... dont connect your phone before launching odin or else it will not be recognized ...
for the few other people who didn't manage to fix it ... it was a hardware failure
Click to expand...
Click to collapse
I never said anything about a white screen. and I am not uneducated on flashing SGS, or using Odin. Far from it. My phone was first showing USB symbol when it wasnt plugged into USB port, then phone started running really hot while charging and got really bloated like it was overheating. So I rebooted and its now force closing at the first boot animation. I can get into download mode and recovery, but will not recognize in any of the 3 computers all running different versions of windows on them, with either of my USB cables that I tried.
Hello,
My Samsung Galaxy S is listed as Unknown Device.
It started after an update to 2.2 via Kies and i did that with the regedit exploration. That was the 2.2 beta and then i updated it again with the official release this time also with the regedit exploit. I have formated the internal SD (i cant dismount it cause im on froyo i guess? atleast there is no option about it). Factory reset and so on.
Reinstalled kies 5 times, installed USB drivers again and again. I have tried it on different platforms with both XP (32-bit), Vista (32-bit) and Slackware Linux (32-bit). The computors just cant find drivers for the device.
I have tried all the different usb options in the phone settings nothing happends. I think i have tried everything that can be found here and on google...
The phone is Rooted and im now on PDA: I9000XWJP6, PHONE: I9000XXJPM, CSC: I9000XEEJP4.
Build Info: 2010. 10.
I believe the main thing here is that i dont even get the MTP application in the phone to recognize that a USB connection have been initialized. Nothing happend in the phone when i connect the USB no MTP screen or anything, just chargeing. I have tried 2 diffrent usb cords both that worked before so its not that.. The computor just says unknown device and Kies dont notice anything at all.
I have tried installing another firmware with Odin in Download mode and stil unknown device.
So i believe the phone have, in some way lost its internal usb drivers? I have also noticed that the battery "100% charged" icon does not disapear after i disconnect the usb or the charger. Also sometimes the icon continues to charge after i disconnect. Sometimes when i turn the phone of it starts by itself after like 2 min.
Anyways! What i was wondering is if there is a way to install an official firmware via update.zip volume-up+home+power?
When i try to install a customized rom with update.zip it says:
E:signature verification failed Installation aborted.
Cause of 3e bootloader? But i think its best to maby have a good stable firmware before i go customized?
So any help would be appreciated!!! heeeeeeeelp.....
Try installing theses drivers x64 x86 depending on what operating system you're on.
If that doesn't work try going into download mode and connect with odin. With the recovery problem you need to flash 2e recovery
You can also try and download and flash the latest version firmware to your phone and see if that helps.
Good luck and tell me how it goes
Serikiito said:
Try installing theses drivers x64 x86 depending on what operating system you're on.
If that doesn't work try going into download mode and connect with odin. With the recovery problem you need to flash 2e recovery
You can also try and download and flash the latest version firmware to your phone and see if that helps.
Good luck and tell me how it goes
Click to expand...
Click to collapse
Hi m8!
Thx for the reply!
I have allready tried installing those drivers doesnt work for me.
I have tried Download mode with Odin to, it still says Unknown Device in Windows (i have Vista 32-bits, but tried it on XP and Linux to).
So anything that has to do with a USB-connection seems impossible at the moment...
The phone dont start the MTP application at all and windows dont install the drivers, it just says unknown device when trying to install.
I just unistalled Kies and removed everything from regedit with "kies" in it and then rebooted and downloaded a new fresh Kies file. Installed it and rebooted again while i wiped the phone, formated the SD and did a factory reset.. still "Unknown Device" :[
The problem seems to be the software in the phone.. so my question is: Is there is anyway to update or flash the firmware in the phone without any USB connection?
Is there maby any way to get 2e recovery mode without usb connection?
Endombed said:
Is there maby any way to get 2e recovery mode without usb connection?
Click to expand...
Click to collapse
There is an app in the Android Development section here that allows you to flash a kernel within Android. Never tried it myself but I believe it is now stable and you could use it to flash CF-Root internally
EDIT: Here you go...
http://forum.xda-developers.com/showthread.php?t=877444
Have you tried recovery mode? Big yellow triangle with Android man holding shovel. Then connect to PC with Kies running and click on firmware update button.
Thx man!
But it seems that i dont have root access anymore, so cant use that app either :/ i think im a hopeless case.. :[
Tehpriest said:
Have you tried recovery mode? Big yellow triangle with Android man holding shovel. Then connect to PC with Kies running and click on firmware update button.
Click to expand...
Click to collapse
Yes man.. i get the same thing with the Yellow friend that says "Do not turn of target!!!"..
"One of the USB devices attached to this computor has malfunctioned. And Windows does not recognize it."
and also
"Unknown Device Installed
The software for this device has been successfully installed.
Unknown device - - Ready to use"
Are you connecting through a hub or direct to the back port of the PC. A hub will cause problems. If direct then try this.. Plug in and wait till you get the unrecognised device info. go into device manager, identify the device it will either say Samsung or unknown device. right click and remove device say yes if it asks if you want to delete the driver. now restart the pc after unplugging the usb then after it has fully restarted and connected to the net plug it back in again. Hopefully it will look on the net for the driver and install the correct one.
Tehpriest said:
Are you connecting through a hub or direct to the back port of the PC. A hub will cause problems. If direct then try this.. Plug in and wait till you get the unrecognised device info. go into device manager, identify the device it will either say Samsung or unknown device. right click and remove device say yes if it asks if you want to delete the driver. now restart the pc after unplugging the usb then after it has fully restarted and connected to the net plug it back in again. Hopefully it will look on the net for the driver and install the correct one.
Click to expand...
Click to collapse
Yep tried that to.. i have even tried it on 3 diffrent computers 2 of them in all usb ports.. and everything els works that was connected in those ports.
I dont think its the software in the computer that is the problem.. :/
I believe there is some internal (in the phone) usb firmware problem, if thats possible?
i have exactly the same problem my usb by giving uknown device (i used it at 3 computer with kies software) it seems usb not working anywhere.
I believe our only solution is to find a way to install e2 recovery via the phone.
I have this problem also.
My SGS is rooted.
I tried everything. Googled many hour.
I din't know what more to do.
I have "Android system recovery <2e>" Is this an advantage?
I turned the phone in to my provider. this message is what i got from the repairservice.
Repair Details: The phone's charge connector is moisture/water -damaged, can not be repaired. returned without action.
WTF?!! i have been really careful with the phone. The only thing i can think of is that it has been really cold where i live (Sweden) and i had it in my pocket.. but i mean cmon! it goto withstand that!
I guess i have to wait for samsung to make it possible to update firmware via Wifi.
Neon2 said:
I have this problem also.
My SGS is rooted.
I tried everything. Googled many hour.
I din't know what more to do.
I have "Android system recovery <2e>" Is this an advantage?
Click to expand...
Click to collapse
With Recovery 2e i think it can be possible to update your phones firmware with the update.zip file but i think you need to have your phone rooted.
Repair Details: The phone's charge connector is moisture/water -damaged, can not be repaired. returned without action.
All makes of Smartphone seem to suffer from, condensation problem .
Or at least thats what the service centres
jje
Endombed said:
With Recovery 2e i think it can be possible to update your phones firmware with the update.zip file but i think you need to have your phone rooted.
Click to expand...
Click to collapse
I think so. I have my phone rooted and also ROM Flash Manager installed. The issue now is to find an european stock image to flash compatible with ROM Flash Manager
I looked for the stock firmware image (my phone has JF3) but can't find where.
Anyone?
I don't want to flash a cooked image just in case I have to ship the phone to the repair service.
Hello, I have exactly the same problem.
My SGS is unrooted, due to warranty, and alway keep it with maximum care (it is not a free phone...).
Symptoms are the same:
-It started after an update to 2.2 via Kies
-Absolutely unrecognized by windows (xp32 and win764) anymore
-battery "100% charged" icon does not disappear after i disconnect the usb or the charger
-turning the phone off it starts by itself after like 2 min.
More: incredible but sometimes when connected to car charger, I have the message "usb connected".
Already tried all possible (unrooted) tricks.
I believe usb internal drivers (if any) are corrupted (maybe by moisture?), how to reinstall them?
Maybe usb connector damaged; I have moved a little bit with a scrwdrvr the usb connector plate and clean with air and a thin blade but no result.
I will bring to service, as warranty is still valid, but surely they will discard me (I am optimist)
If there is any solution, please post it.
Hello,
Same here, can't connect phone to pc, mtp dont start on phone after connect it on pc !
Anyone know how flashback stock rom if its possible ?
Hi someone have a stock firmware for flash it in to recovery ?
I think i will try send the phone to samsung after reflashing for see what the guys from samsupport says about this !
Yes, if a part of firmware has been corrupted (with usb info for pc recognition) maybe the solution is to reinstall entire rom.
How to find a stock rom?
How to reinstall rom from SD card in a non rooted phone with no usb connection?
My SGS isn't bricked. But lately after I flashed a deodexed 2.3.3 ROM, I have a hard time connecting my USB (USB not recognized). This afternoon, my phone jammed and won't boot (Stuck in Samsung Galaxy S I9000 Screen). I can't enter the recovery mode either for no reason (used to be able to).
Now I can't flash a stock ROM because my USB isn't recognized and recovery mode is unaccessible too. Trying to install the drivers for the USB now. Anyway as it's installing, any other ways to bring my phone back?
Flash a rom through odin. You could try darky's 9.2 ressurection edition.
The problem now is I could not flash with Odin because my USB isn't working
smiles.smiley said:
My SGS isn't bricked. But lately after I flashed a deodexed 2.3.3 ROM, I have a hard time connecting my USB (USB not recognized). This afternoon, my phone jammed and won't boot (Stuck in Samsung Galaxy S I9000 Screen). I can't enter the recovery mode either for no reason (used to be able to).
Now I can't flash a stock ROM because my USB isn't recognized and recovery mode is unaccessible too. Trying to install the drivers for the USB now. Anyway as it's installing, any other ways to bring my phone back?
Click to expand...
Click to collapse
seriously try using other computer or laptop.. install the required drivers on your friends computer and then try to flash a different rom via odin
tried that. on different comp. same problem. USB not recognized with the drivers installed
I guess this is the problem. When I can't boot my phone, I did a backup restore. Maybe something is messed up and drivers don't recognize my phone as Samsung Galaxy S anymore. Anyway to force it to recognize?
http://www.nirsoft.net/utils/usb_devices_view.html
REMOVE USB DEVICES .
USB connection must be a motherboard connector .
jje
I'm sorry for being a noob. I've downloaded USBDeview. I should remove USB devices and? What do i do after that?
My USB device is Not Recognized. will it show on USBDeview?
Shows old usb drivers delete the lot on that port .
jje
Deleted everything. Plugged in my SGS in Downloading Mode. Still don't get anything.
smiles.smiley said:
Deleted everything. Plugged in my SGS in Downloading Mode. Still don't get anything.
Click to expand...
Click to collapse
if you can go into download mode then you surely can get it flashed with odin ..
try downloading the drivers again and then installing again and then try again....
... if everything fails then you should send it to the service center
Try unplugging and plugging the usb repeatedly. I've had this happen before, and I was able to get the phone recognised by doing this.
Okay a little backstory:
I was on an early version of CM9 but as i am selling the phone i decided to put a more stable version of it on there and downloaded CM7 -stable.
I flashed this in CWM and it worked fine.
I gave it a quick test and noticed all the google apps were missing, most importantly the market. So i booted into recovery and realised i had forgotten to put the zip on the SD card.
I then went into mounts and mounted USB, nothing happened...
From that point onwards the phone would not talk to the PC. even if i booted up into the phone, it would just show it as charging. I could not find any options in the menus for USB options.
After some extensive reading, i tried a few things, none of them had worked. I found a post mentioning some kernels have issues with USB, so i downloaded the recommended one and flashed it in CWM.
After rebooting, CWM was now orange and not blue and the option to flash from external card has gone.
I have also done some digging and there is a good posibility that the kernal that i flashed was for the GT I9000 (which is the american one, right?)
So as it is at the moment:-
I can get into CWM.
I can get into download mode through the 3 button combo.
I can get into download mode using home made jig.
I can boot the phone, but it boot loops.
I can not get the phone to be detected on the pc.
Things i have checked:
Cable will connect other phones.
Tried different cable to be sure.
Phone used to be detected, but downloaded drivers through kies again to be sure.
Closed Kies using task manager.
Nothing is coming up in network connections in device manager when phone is connected.
I'm out of ideas now, so £10 PayPal donation for anyone that comes up with the solution to fix it
If i can get it detected, i can use Odin to flash what i want.
Sounds like a drivers problem. You may need the 'Google driver' developer.android.com/sdk/win-usb.html
When I had bootloops when I first installed CM9 I used heimdall to flash a the stock CM9 kernel. This gave me back CWM.
heimdall flash --kernel 'kernel.zip'
In the commandline.
Thanks for that,
I already had the Google USB drivers from when i installed the SDK to make some apps.
So i then gave Heimdall a try (Graphical Version), it seemed to suffer the same problem.
Reporting "Failed to detect compatible download-mode device."
I seem to remember the GUI saying I didn't have the correct drivers and it downloaded them for me.
The other thing worth a try is changing the USB port and reinstalling the correct drivers on that port.
I've not seen anything like that, it has not asked me for any drivers.
It's like the phone is not connected at all. nothing will detect it, i have even tried it on another PC.
Sorry, I'm not sure what you mean by installing on a port.
Well sometimes changing USB port will allow you to install new drivers. Although if you've tried it in another computer and it doesn't work then changing port may not help.
Does the phone appear in device manager when it's connected and in download mode?
Nope. Not coming up at all in the device manager. It didn't when it was booting fine. And it still doesn't in download mode. :-( I'm thinking the usb connector on the phone might be faulty.
But it was working up until trying to mount the USB in CWM
Sent from my GT-N7000 using XDA App
I don't suppose you have access to a Linux PC do you? Windows USB drivers are notoriously sucky. If you could plug it into a Linux PC and type 'lsusb' at a command line, that would at least show you that the device is really there.
I think I have a spare pc kicking around that I could use. I'll give it a go when I get home tonight.
Sent from my GT-N7000 using XDA App
Remove all the drivers completely from device manager for Samsung, then install fresh drivers and connect the cable when in download mode, hopefully it will recognize it
Are you sure the connector is clean? e.g. maybe there's dust in it.
I had that problem once, the connector was full of fabric fibers from some coat's pocket I had the phone in.
Suggestion 1 (Linux): I installed ubuntu, did not detected anything to even install any drivers. Detected my new phone fine.
Suggestion 2 (Uninstall drivers from device manager): I could not find any drivers named with the name Samsung in there.
Suggestion 3 (Clean port): I have some compressed air that i sprayed inside, it does look pretty clean and will continue to charge but still not connection on the pc.
To install the drivers for heimdall you have to run zdiag from inside the driver folder. Had to do this earlier on, the phone the other appeared as something other than Samsung composite usb or whatever it normally says
I tried this, and it displayed 9 devices after selecting show all. I seemed to recognise all of the items in the menu.
To be sure, I then disconnected the phone and re ran it to see if one of the items were missing, but it was the same number.
I too had problem with the usb connection on my i9000, and I was pretty sure my usb connector on the phone is somewhat damaged since it sometimes can only go to charging mode without being detected by my pc as a usb device. CWM instal is fine but ODIN can only detect the phone without able to flash the rom to the phone. The flashing will always stuck at the message "Setting Up Connection", I waited for 15 minutes and the flashing will eventually died. I retry the odin flash for 40 to 50 times and eventually the flashing will go through one time. Tried heidmall command line and the result is the same.
I have problem with Odin in the past. I bought a new laptop, running Win7 64 bit. Installed Samsung Kies to install the correct USB drivers for the phone. Then made sure that Kies wasn't running in the background. So tried using Odin. Odin was detecting the phone, but it was hanging at initialising connection. Odin was working fine on my old laptop running Win7 32bit. Long story short, I was having a few issues with my new laptop, reinstalled Win7 64bit, now Odin is working fine, have flashed the phone a few times using the new computer.
After flashing which kernel you started facing this problem?
Wipe ur phone,re-flash CM7(flash the nightly 181,it's completely stable),uninstall KIES,uninstall old usb drivers,install these usb drivers http://forum.xda-developers.com/showthread.php?t=961956 ,check that USB storage mode is set as Mass Storage and then connect your phone. Also try enabling/disabling USB debugging
lovedonator said:
After flashing which kernel you started facing this problem?
Wipe ur phone,re-flash CM7(flash the nightly 181,it's completely stable),uninstall KIES,uninstall old usb drivers,install these usb drivers http://forum.xda-developers.com/showthread.php?t=961956 ,check that USB storage mode is set as Mass Storage and then connect your phone. Also try enabling/disabling USB debugging
Click to expand...
Click to collapse
The point at which i could no longer mount the USB was when i selected "mount usb" from CWM. I later installed a new kernal which downgraded my CWM, removing the install from external SD option.
So I cant flash a re-flash a rom unless i can it onto the phone which without the USB working is near impossible.
Xyis said:
The point at which i could no longer mount the USB was when i selected "mount usb" from CWM. I later installed a new kernal which downgraded my CWM, removing the install from external SD option.
So I cant flash a re-flash a rom unless i can it onto the phone which without the USB working is near impossible.
Click to expand...
Click to collapse
You can directly download the ROM on your internal sd using dolphin browser or opera mobile
I can't do that either as the phone is currently boot looping.
Sent from my GT-N7000 using XDA App
Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it