Update gone wrong? - Galaxy S I9000 Q&A, Help & Troubleshooting

I tried to flash stock 2.3.6 xwjvz and odin hanged at setup connection and everything i try it just hang's at setup connectio.. i cant flash anything... strange thing that the phone is soft bricked and shows that sign with phone and computer but it still wants to go into download mode normali???
II tried this thing so far... different odin, reinstall usb drivers and going to download mode via usb jig...

krimos said:
I tried to flash stock 2.3.6 xwjvz and odin hanged at setup connection and everything i try it just hang's at setup connectio.. i cant flash anything... strange thing that the phone is soft bricked and shows that sign with phone and computer but it still wants to go into download mode normali???
II tried this thing so far... different odin, reinstall usb drivers and going to download mode via usb jig...
Click to expand...
Click to collapse
Actually the same happened to my SGS & ended up at samsung service center, got it's Mobo replaced ..!
Still i Dunno what caused the issue..

Did you try a different USB port? Or Different USB cable? Also what version of ODIN are you running?

Related

Help...ODIN won't recognize phone in download mode

I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Daneshm90 said:
Ok while in download mode n unplugged from pc....open up device manager.....then connect ur phone....does it refresh ?
Click to expand...
Click to collapse
Yes..."SAMSUNG USB composite Device" comes up with an error. Device status shows, "This deveice cannot start. (Code 10)"
Nexus S Drivers?
Maybe u can try with Nexus S Drivers.
U can donwload from developer.android.com/sdk/win-usb.html
Diaf82 said:
I have drivers installed, I've used Odin before but now it won't recognize the phone in download mode. It'll see it when it is on though. Any help??? This happened after updating to 2.3.3 through Kies.
Just noticed that the PC doesn't recognize the phone either now. Must be drivers issue. How do I fix it???
Click to expand...
Click to collapse
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
hamsterkiller said:
In Kies, there are Kies Driver installer, that install a bunch of drivers for phone.
Try to install all drivers and then connect phone again.
Click to expand...
Click to collapse
This did it! Thanks.
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
do you have the kies drivers installed? and is kies not running (inc. shut down tray agent?
try another usb port, that was a problem I had, Odin is picky with good or bad usb ports...
jerzyk_ said:
hi guys
I have a same problem, but i have a little difference.
When i plug the cabel in download mode - nothing happen
What I could to do in this situation? Thanks for your advice
Click to expand...
Click to collapse
Try this http://forum.xda-developers.com/showthread.php?t=961956
Sent from my GT-I9000 using XDA App
SamHaLeKe:
So i tried this, but it doesnt help. I still have in device manager something wrong.
When I'm trying Update Driver Software, windows cant found right driver...
Is it possible, that I something f*ct up at last flash? Before it everything works fine. When I flashed first time, i forgot the *.pit file - odin wrote "failed" - I tried it again, but correctly - everything was ok - I fashed kernel - after that in CMW I Instaled *.zip file with Juwe's ROM 4.3.1 and my phone reboot in landscape mode... and i cant change it to normal mode.
I tried factory reset from phone - there are some red lines with this: tsf format failed on dev/block/mmcblk0p2, but when i go to CWM mode through (volUP+home button+on/of button) and i did a factory reset there - is it without red lines. Somebody ask me if i tried reflash - so i am here with my "driver problem"
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
toxic1 said:
hi mate i had the very same prob.uninstall kies then run a registery cleaner to clean up the registery.that solved it for me
then reinstall kie
Click to expand...
Click to collapse
Noooooo, not reinstall that bloath ware, just the NEW drivers!
Sent from my GT-I9000 using XDA App
lol ok then just drivers then
I know this may sound dumb, but make sure you are using a compatible cable.. i.e. does data transfer, I bough a replacment cable months ago for my damaged one under the impression it did data because I could connect and transfer to USB (I know this is data)... but kies would not recognize the phone.. I ended up buying a real replacement. Problem solved.
I think, that my biggest problem is cannot connect to kies and odin...
i am in the end... so cabel is the same, i used it when i flashed befor - as i said my problem is in phone, not in drivers or cabels. Is here something to do flash without this drivers?
can you confirm there is no issue with your USB ports on your computer? just seems odd it wont recognize your phone in download mode... you are placing it in download mode when using odin right?
I just did a flash with mine to a stock rom,
Same problem, I can get to DL mode, but it does not recognize,
When I am in the standard Tab OS, with USB as mass storage, I can see if fine.
Odd how it just happened as well. I'd like to follow this thread see where it goes.
*edit reinstalling drivers does not resolve the issue,
- have not tried installing keis again yet though,
- also Odin recognizes it in Recovery Mode
*edit again - sorry guys, didnt realize i was in the i9000 forum, hit this on a google search and replied
I can go to the download mode throught 3-buttons combo - but odin recognize my phone - the same thing is in kies - it's vicious circle - i hope flash help me - but I cant do it, because i cant connect to odin
Unfortunatly I am out of help... I thin kyou may need someone who knows ADB and the phones system internals if ODIn won't recognize your phone in Donload mode... I have had my phone in several bad situations(Fried internalsd/bootloaders) but download mode would always connect me to ODIN..
Last try, try different versions of odin, 1.3 - 1.8 apparently it can be testy with different versions of windows.
Try the drivers & Odin 1.83 from my signature. Works all the time.

Any Other Way To Bring My Phone Back To Life

My SGS isn't bricked. But lately after I flashed a deodexed 2.3.3 ROM, I have a hard time connecting my USB (USB not recognized). This afternoon, my phone jammed and won't boot (Stuck in Samsung Galaxy S I9000 Screen). I can't enter the recovery mode either for no reason (used to be able to).
Now I can't flash a stock ROM because my USB isn't recognized and recovery mode is unaccessible too. Trying to install the drivers for the USB now. Anyway as it's installing, any other ways to bring my phone back?
Flash a rom through odin. You could try darky's 9.2 ressurection edition.
The problem now is I could not flash with Odin because my USB isn't working
smiles.smiley said:
My SGS isn't bricked. But lately after I flashed a deodexed 2.3.3 ROM, I have a hard time connecting my USB (USB not recognized). This afternoon, my phone jammed and won't boot (Stuck in Samsung Galaxy S I9000 Screen). I can't enter the recovery mode either for no reason (used to be able to).
Now I can't flash a stock ROM because my USB isn't recognized and recovery mode is unaccessible too. Trying to install the drivers for the USB now. Anyway as it's installing, any other ways to bring my phone back?
Click to expand...
Click to collapse
seriously try using other computer or laptop.. install the required drivers on your friends computer and then try to flash a different rom via odin
tried that. on different comp. same problem. USB not recognized with the drivers installed
I guess this is the problem. When I can't boot my phone, I did a backup restore. Maybe something is messed up and drivers don't recognize my phone as Samsung Galaxy S anymore. Anyway to force it to recognize?
http://www.nirsoft.net/utils/usb_devices_view.html
REMOVE USB DEVICES .
USB connection must be a motherboard connector .
jje
I'm sorry for being a noob. I've downloaded USBDeview. I should remove USB devices and? What do i do after that?
My USB device is Not Recognized. will it show on USBDeview?
Shows old usb drivers delete the lot on that port .
jje
Deleted everything. Plugged in my SGS in Downloading Mode. Still don't get anything.
smiles.smiley said:
Deleted everything. Plugged in my SGS in Downloading Mode. Still don't get anything.
Click to expand...
Click to collapse
if you can go into download mode then you surely can get it flashed with odin ..
try downloading the drivers again and then installing again and then try again....
... if everything fails then you should send it to the service center
Try unplugging and plugging the usb repeatedly. I've had this happen before, and I was able to get the phone recognised by doing this.

[Q] Bricked Galaxy S : Download mode corrupted?

Hi everyone
So here it is : No program is able to recognize/detect my Galaxy S i9000M (Bell Vibrant) when it's in download mode, so I can't flash any ROM. My phone is currently fully bricked and unusable. I cannot access to the recovery mode with the three-button thingy or by "adb reboot recovery"
I bricked using Odin 1.8, trying to flash a 2.2 froyo stock ROM from Samfirmware. The flashing went ok, but it failed to reboot. Actually, the screen was turned off and nothing was happening. I figured out it was fully bricked so I made a USB JIG, it worked. I can access my download mode.
I connected the phone to my Windows 7 computer and used Odin to flash back to 2.1 Eclair, with a stock ROM from Samfirmware. It failed (I don't remember the error message, it was a couple days ago...).
I tried with Heimdall Frontened. It had a problem uploading the .pit file, so the flashing didn't work.
Now each time i connect the phone to my computer, Windows (and Heimdall frontened and Odin) doesn't detect it,which means that I can't flash anything on it even though it is in download mode.
I have tried reinstalling like every driver on earth, still not responding.
I tried on another Windows 7 machine and on Ubuntu, the device is not detected.
I tried with different USB cables, nothing happens.
This is my hypothesis (maybe silly) : Could the problem be the Download mode being corrupted?
Whatever... I could use some help from you guys.
Thank you,
Sam
I had/have the same problem.
I installed the Samsung Kies and now my computer recognize my phone again.
But I have still no idea what I need to flash to make my phone working.
goldsage said:
I had/have the same problem.
I installed the Samsung Kies and now my computer recognize my phone again.
But I have still no idea what I need to flash to make my phone working.
Click to expand...
Click to collapse
That is strange... I tried installing Kies and it didn't detect the phone. And you could just flash any 2.3 stock ROM with Odin I guess.

Galaxy TAB P1000 NOT Detecting in ODIN

Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it

[Q] Windows shows 'unknown device' in Download mode..

This is probably getting boring to some people now but i am having a major issue with Odin detecting my phone when it is in Download mode.
Once i connect the phone after loading up Odin and holding the 3 button combo, Windows installs 2 more drivers - USB Device and then Unknown Device. Then nothing, Odin just sits there and no yellow box glows or a COM port showing the phone is connected. I have tried installing Kies originally and using the drivers from that with no success, then i used the standalone driver packages available from softpedia and several other websites with no luck. What i can't understand is, when i connect the phone to my computer in it's normal state it has no problems and allows me to transfer files, access both the internal and external SD but shows as an 'unknown device' in the Device Manager when in Download mode... Why??!!
Somebody please help me!
Which rom are you using?
Also did you try this on some other PC/Laptop?
ishangoyal said:
Which rom are you using?
Click to expand...
Click to collapse
I'm on an Orange stock rom, here's some of my phone details -
PDA: I9000BVJVC
PHONE: I9000BVJV3
CSC: I9000ORAJV6
ishangoyal said:
Also did you try this on some other PC/Laptop?
Click to expand...
Click to collapse
I have not tried it on a different computer yet, not sure if i need to considering it connects normally when the phone is on, just not in Download mode... I really don't know what's going on!!
N8tR1X said:
I'm on an Orange stock rom, here's some of my phone details -
PDA: I9000BVJVC
PHONE: I9000BVJV3
CSC: I9000ORAJV6
I have not tried it on a different computer yet, not sure if i need to considering it connects normally when the phone is on, just not in Download mode... I really don't know what's going on!!
Click to expand...
Click to collapse
Stock rom shouldn't have this problem.. you should either uninstall everything related to samsung from your computer and then start again or try connecting to a different PC.. you'll be able to find out whether this problem is just with the single system or not
I always run up Odin, then use the 3 buttons to get to download mode and then connect to USB port.
Sent from my GT-I9000 using XDA
I had the same problem, then I finally got it to work.
Try this:
First off, you may need to try several different versions of Odin. The one I finally got to work on my phone was V1.85. you can find a collection of different versions to download here: http://droidangel.blogspot.com/2011/05/odin-multi-downloader-flasher-program.html
Next, Load up Odin. Plug in you phone to the USB port with phone powered on, remove the battery on the phone. While holding the 3 buttons down (Volume up, down & power) put the battery back in. Wait for the text to start to scroll, let go of the buttons. When it gets to the menu, unplug the USB, then plug back in. The yellow box in Odin should say it's connected. If not you may have to do this a couple of times.
Now this is the part I can't remember...I think what I did from here is chose the recovery option in the menu. Sorry I don't remember exactly what i did, I was a noob when I did it, and I think I got lucky.
I do remember that Odin would not flash it until I finally got to the screen with the picture of the android in the construction hat, or something like that.
Maybe someone with more experience can help with this part.
I had the same problem
The fix is: Use the USB JIG to get into download mode.
Update your PC USB driver for SGS1. Follow the OP on this link:
http://forum.xda-developers.com/showthread.php?p=35227656
Device: GT-i9000
Rom: JB 4.2.1 Vanilla Rootbox v0.0.2
Gapps +..: JusTunBean Inverted
Kernel: Mackay 0.244

Categories

Resources