i have installed new ver. of this rom for my Samsung galaxy s1 and the battery is terrible its get down at night 10% when its on sleep mode its nightly ver. i understand it is not a stable version but can i fix its?
i did calibration but its not help..
any suggestions?
ilia15951 said:
i have installed new ver. of this rom for my Samsung galaxy s1 and the battery is terrible its get down at night 10% when its on sleep mode its nightly ver. i understand it is not a stable version but can i fix its?
i did calibration but its not help..
any suggestions?
Click to expand...
Click to collapse
are you using Gingerbread bootloader ?
I suggest you to use Insanity CM032 (it's based on CM).
My battery life is crazy good with this rom and GB Bootloader.
http://forum.xda-developers.com/showthread.php?t=843019
Cheers
how can i check if i have GB Bootloader?
i cant see a download of this ROM u Gave me can u give me a link to download?
tnx
edit:nvm i found this download its better than cm7?
ilia15951 said:
how can i check if i have GB Bootloader?
i cant see a download of this ROM u Gave me can u give me a link to download?
tnx
edit:nvm i found this download its better than cm7?
Click to expand...
Click to collapse
Go to this thread http://forum.xda-developers.com/showthread.php?t=1158783
And Download JVQ or JVR Bootloader,
With Gingerbread bootloader my drain at night is 2%
what is better JVQ OR JVR i am installed radio JVP its ok?
now i need intsall from recovery bootloader right?
so what better JVQ or JVR?
ilia15951 said:
what is better JVQ OR JVR i am installed radio JVP its ok?
now i need intsall from recovery bootloader right?
so what better JVQ or JVR?
Click to expand...
Click to collapse
You cannot install Bootloaders from Recovery. You need to install them via Odin.
Check the guide at http://sgscm7nightlies.pbworks.com/w/page/43987996/Flashing Bootloaders
Also all modern GB bootloaders are the same, only the names are different depending on which version the got ripped out of.
tnx i install bootlaoder i will see how its works..
ilia15951 said:
its including wipe?
Click to expand...
Click to collapse
No wipe is required when flashing Bootloaders.
before i has installed bootalder i have 68% now after installation i got 74% how can it be?
ilia15951 said:
before i has installed bootalder i have 68% now after installation i got 74% how can it be?
Click to expand...
Click to collapse
After flashing, no battery readings are accurate. Give it a charging cycle or two before you pass any judgments on it.
u mean calibration?
ilia15951 said:
u mean calibration?
Click to expand...
Click to collapse
Calibration is a myth. Just charge the phone a couple times, it will calibrate itself just fine.
lol ok tnx for the help :]
I'm waiting for the battery has discharged and then I load it it...
i hope its will work for me...
sorry about the double but i got problem after bootloader install
my sgs cant read my sdcard..
i am tried to rebot nothing helps..
what i can do?
ilia15951 said:
sorry about the double but i got problem after bootloader install
my sgs cant read my sdcard..
i am tried to rebot nothing helps..
what i can do?
Click to expand...
Click to collapse
Then you must not have a recent Nightly installed.
Download the newest build from http://download.cyanogenmod.com/?device=galaxysmtd and flash it via recovery.
it is the newest version nightly Send to ROMManager cm_galaxysmtd_full-83.zip
and i using 82 ver. it is meter?
its nightly
If you need to know, whats added, check the changelog,
http://cm-nightlies.appspot.com/?device=galaxysmtd
It just 1 thing, if you need it, flash it
its will resolve the sd card problem?
ilia15951 said:
its will resolve the sd card problem?
Click to expand...
Click to collapse
If you have 82, you shouldn't be having an sd problem.
You do know to look in /emmc for your external SD card, yes?
rschenck said:
If you have 82, you shouldn't be having an sd problem.
You do know to look in /emmc for your external SD card, yes?
Click to expand...
Click to collapse
no how i doing this?
Related
my phone for some reason i turned it on and the phone app wasnt there so i cant dialer a number to call.I am running on DC 2.09.1 is there anything i can do?? If not could unroot my phone and take the davilk-cache and they not know my phone was rooting,rommed, partitioned, or overclocked??
damage rom is pretty outdated. try to flash a different current rom. taking the phone back because of a faulty custom rom is stupid.
fixxxer2008 said:
damage rom is pretty outdated. try to flash a different current rom. taking the phone back because of a faulty custom rom is stupid.
Click to expand...
Click to collapse
no its every time a flash the rom or a older version of the rom the phone apk is gone i think it is more than just the rom but i will try
ok i am trying the NFX-Hero 2.2.1 ODEX rom to see if that works
xxxk15 said:
ok i am trying the NFX-Hero 2.2.1 ODEX rom to see if that works
Click to expand...
Click to collapse
do a full wipe before you flash a new rom.
fixxxer2008 said:
damage rom is pretty outdated. Try to flash a different current rom. Taking the phone back because of a faulty custom rom is stupid.
Click to expand...
Click to collapse
thanks man it worked!
fixxxer2008 said:
do a full wipe before you flash a new rom.
Click to expand...
Click to collapse
yep always do
below are the current android details in my I9000,
Firmware Version: 2.3.6
Baseband Version: I900XXJVU
Build Number : GINGERBREAD.XXJVU
Tried upgrading to Remics-JB 3.0.1 and failed. Reverted to the 2.3.6 XXJUV. Can someone point me the steps or specific forum following which i can upgrade to either ICS or JB ?
Can you describe why it failed? You need to tell more, so we know what went wrong.
monkeywithbanana said:
Can you describe why it failed? You need to tell more, so we know what went wrong.
Click to expand...
Click to collapse
1. rooted the XXJVU
2. tried installing the Remic-JB which i had earlier copied to internal SD card
3. successfully installed, rebooted and got stuck in boot screen. waited for 5-10 minutes no change.
4. removed the battery and rebooted manually, the same status.
5. reverted back to XXJVU.
guess this helps
Wipe everything and flash it two times.
monkeywithbanana said:
Wipe everything and flash it two times.
Click to expand...
Click to collapse
any reason why it should be done twice ?
mspocke said:
any reason why it should be done twice ?
Click to expand...
Click to collapse
Coming from GB it is wise to flash a ICS rom first before going to jellybean,
after this then you should be fine.
mspocke said:
any reason why it should be done twice ?
Click to expand...
Click to collapse
It configures the partition and it's good to do that just in case.
I bought my friends phone in an attempt to fix it but it kind of worked, the problem it first had was that it didnt load after boot screen so i installed a rom from live samsung updates, it worked but then the phone over heats and im guessing thats the cause of the battery drain i tried install different 4.1.2 pda versions like I9070XXLQL, I9070DXAMD1 and I9070XXLQE but they all still over heat my phone, current i have the ITV version installed which is I9070XXLQL.
the battery temperature is 46 degrees according to the phone tester app
i have Watchdog lite, battery doctor,task killer and clean master app installed to keep the ram low
Is it cause my phone can't handle 4.1.2 JB version, should i install a 2.3 GB rom?
Doomsdude said:
I bought my friends phone in an attempt to fix it but it kind of worked, the problem it first had was that it didnt load after boot screen so i installed a rom from live samsung updates, it worked but then the phone over heats and im guessing thats the cause of the battery drain i tried install different 4.1.2 pda versions like I9070XXLQL, I9070DXAMD1 and I9070XXLQE but they all still over heat my phone, current i have the ITV version installed which is I9070XXLQL.
the battery temperature is 46 degrees according to the phone tester app
i have Watchdog lite, battery doctor,task killer and clean master app installed to keep the ram low
Is it cause my phone can't handle 4.1.2 JB version, should i install a 2.3 GB rom?
Click to expand...
Click to collapse
No it´s not a problem with your stock rom ( JB or Gingerbread)
Either the device is corrupt or you should try to flash another stock rom again.
by some stock roms the device over heats for me too.
Try another one...I´m using xxlpe
(-flash via odin-)
Doomsdude said:
I bought my friends phone in an attempt to fix it but it kind of worked, the problem it first had was that it didnt load after boot screen so i installed a rom from live samsung updates, it worked but then the phone over heats and im guessing thats the cause of the battery drain i tried install different 4.1.2 pda versions like I9070XXLQL, I9070DXAMD1 and I9070XXLQE but they all still over heat my phone, current i have the ITV version installed which is I9070XXLQL.
the battery temperature is 46 degrees according to the phone tester app
i have Watchdog lite, battery doctor,task killer and clean master app installed to keep the ram low
Is it cause my phone can't handle 4.1.2 JB version, should i install a 2.3 GB rom?
Click to expand...
Click to collapse
Root, istall CoCore E kernel, use PegasusQ governor, SIO scheduler. You can find all that in I9070 Original Development thread.
Happymaker said:
No it´s not a problem with your stock rom ( JB or Gingerbread)
Either the device is corrupt or you should try to flash another stock rom again.
by some stock roms the device over heats for me too.
Try another one...I´m using xxlpe
(-flash via odin-)
Click to expand...
Click to collapse
I9070XXLPE? is your phone I9070 or I9070P? nvm i clicked of show contents lol
shut_down said:
Root, istall CoCore E kernel, use PegasusQ governor, SIO scheduler. You can find all that in I9070 Original Development thread.
Click to expand...
Click to collapse
what does that do?
Doomsdude said:
what does that do?
Click to expand...
Click to collapse
Governor change the way CPU is scaling. When it uses what frequency. And that kernel is way better optimized than stock one.
P.S. How long does that heating lasts? I remember it was couple of hours when I was on stock, maybe during media scan (on first boot).
shut_down said:
Governor change the way CPU is scaling. When it uses what frequency. And that kernel is way better optimized than stock one.
P.S. How long does that heating lasts? I remember it was couple of hours when I was on stock, maybe during media scan (on first boot).
Click to expand...
Click to collapse
the heat last till battery is dead, it doesnt cool down
I have rooted it, download kernel and installed universal kernel flasher but when i click on select a kernel image, it says "Unable to find application to perform this action, i have extracted the kernel.bin.md5 file from zips and placed it into extsdcard and also moved it to sdcard but both still come up with the same thing
Nvm found out i also needed to download file manager
The phone is still overheating after installing kernel, i installed kernel by using recovery mode and installed zip from there, cause doing it the DD way was too complicated since i didnt know how to get into superuser mode and type in [dd if=/sdcard/kernel.bin.md5 of=/dev/block/mmcblk0p15]
Doomsdude said:
the heat last till battery is dead, it doesnt cool down
I have rooted it, download kernel and installed universal kernel flasher but when i click on select a kernel image, it says "Unable to find application to perform this action, i have extracted the kernel.bin.md5 file from zips and placed it into extsdcard and also moved it to sdcard but both still come up with the same thing
Nvm found out i also needed to download file manager
The phone is still overheating after installing kernel, i installed kernel by using recovery mode and installed zip from there, cause doing it the DD way was too complicated since i didnt know how to get into superuser mode and type in [dd if=/sdcard/kernel.bin.md5 of=/dev/block/mmcblk0p15]
Click to expand...
Click to collapse
Ok, post your battery stats (screenshot) when you discharge it at least to 50%. To see what is draining battery.
shut_down said:
Ok, post your battery stats (screenshot) when you discharge it at least to 50%. To see what is draining battery.
Click to expand...
Click to collapse
is this it?
Doomsdude said:
is this it?
Click to expand...
Click to collapse
Yes. And when you tap on screen time, how much hours do you get?
Average for me is that battery drains in about 12-15 (it can get more if I use it less) hours with 2-3 hours of onscreen on JB with autosync and wifi or 3g on.
Hey, after one day of utilisation of my battery,
she is dead, 0%.7
It's really problematico, because any mounth ago, afte roneday of utilisation, my battery is at 50%.
I have carbon l 4.3.3 rom.
What is the better rom for battery?
Can you help me?
Thanks.
lehrqt said:
Hey, after one day of utilisation of my battery,
she is dead, 0%.7
It's really problematico, because any mounth ago, afte roneday of utilisation, my battery is at 50%.
I have carbon l 4.3.3 rom.
What is the better rom for battery?
Can you help me?
Thanks.
Click to expand...
Click to collapse
CM10.1 or stock.
I've got the (NFC vesion i9070P).
My reason for you is to search for another stock rom or flash (Harshjelly for stock) .A custom rom like 10.1 which shutdown said or the new kitkat 4.4.2 by maclaw.If you want more information about it ask.
The battery drain is either a corrupt by your devive or a wrong (stock/custom rom) whatever....
Sent from my GT-I9070P using xda app-developers app
83223488 6
shut_down said:
Yes. And when you tap on screen time, how much hours do you get?
Average for me is that battery drains in about 12-15 (it can get more if I use it less) hours with 2-3 hours of onscreen on JB with autosync and wifi or 3g on.
Click to expand...
Click to collapse
I get 1-2hrs, and when its off its 3-4hrs
Doomsdude said:
I get 1-2hrs, and when its off its 3-4hrs
Click to expand...
Click to collapse
See if battery is swollen. Put it on some flat surface and see how it looks.
643 43632332
shut_down said:
See if battery is swollen. Put it on some flat surface and see how it looks.
Click to expand...
Click to collapse
I bought a new battery so its flat
Doomsdude said:
I bought a new battery so its flat
Click to expand...
Click to collapse
I am not sure what else to suggest you. 4 hours of standby is not normal. Maybe some hardware problem... You did factory reset on change of a ROM/firmware?
Послато са GT-I9070 уз помоћ Тапатока
shut_down said:
I am not sure what else to suggest you. 4 hours of standby is not normal. Maybe some hardware problem... You did factory reset on change of a ROM/firmware?
Послато са GT-I9070 уз помоћ Тапатока
Click to expand...
Click to collapse
yes, wipe cache and dalvik cache and reset settings after installing the roms
My sister's phone, S3 mini I8190N just got restarted. Even when turn on, it will just restart. Got once it show a message, Kernel panic. Something like that. How to fix it without losing any data? I need a quick solution. Thanks in advance.
a4apple said:
My sister's phone, S3 mini I8190N just got restarted. Even when turn on, it will just restart. Got once it show a message, Kernel panic. Something like that. How to fix it without losing any data? I need a quick solution. Thanks in advance.
Click to expand...
Click to collapse
rooted or not?
which ROM and kernel?
need more infos...
moonryder said:
rooted or not?
which ROM and kernel?
need more infos...
Click to expand...
Click to collapse
Not rooted. Official rom and kernel. 4.1.2 jellybean baseband I8190NDXLL7
Sorry for bumping the thread. Anyone?
a4apple said:
Sorry for bumping the thread. Anyone?
Click to expand...
Click to collapse
Try flashing the official rom with odin. You don't lose any data using odin. You just have to go search for your rom and the tool (odin). I'm not sure that you dont lose any data but I already done that and my data was intact! But it's better to someone with more experience advise you.
pajocos said:
Try flashing the official rom with odin. You don't lose any data using odin. You just have to go search for your rom and the tool (odin). I'm not sure that you dont lose any data but I already done that and my data was intact! But it's better to someone with more experience advise you.
Click to expand...
Click to collapse
Thank you for the reply. May I know whether that can i upgrade it through KIES? I couldnt find any upgrade patch for it using Kies. Lastly, what causes this to happen?
New update: After flashing a latest firmware, the problem still exists. It reboot itself. After screen on for a while not more than 30 seconds, phone restarts. Help please.
a4apple said:
New update: After flashing a latest firmware, the problem still exists. It reboot itself. After screen on for a while not more than 30 seconds, phone restarts. Help please.
Click to expand...
Click to collapse
Did you install any custom kernel which is supposed to be for aosp roms???
And can you post some screenies
eswarvf said:
Did you install any custom kernel which is supposed to be for aosp roms???
And can you post some screenies
Click to expand...
Click to collapse
No. Is still a stock a rom and even root before. Is an official rom. Cant post screenshot because it just happen very fast. When I flashes the latest firmware, no more kernel panic message but once it finish booting within the first 10 seconds it will auto restart
a4apple said:
No. Is still a stock a rom and even root before. Is an official rom. Cant post screenshot because it just happen very fast. When I flashes the latest firmware, no more kernel panic message but once it finish booting within the first 10 seconds it will auto restart
Click to expand...
Click to collapse
Go for custom rom like novafusion and see if its the same
or
If u got warranty give it to sammy
eswarvf said:
Go for custom rom like novafusion and see if its the same
or
If u got warranty give it to sammy
Click to expand...
Click to collapse
Okay. Thanks! Will try and see for the result.
Hello,
I rooted my phone and then i istalled a new ROM. The ROM had some problems so i removed it trough recovery mode ---> clean to istall a new ROM
After that i accidentally type on "factory reset" and now i can't use my phone (it only shows me the logo screen)
i tried to istall other ROM but they didn't work ( they caused non-stop rebooting in my device)
HTC desire 510
android version 4.4.3
Can someone help me please?
Have you tried to install the stock ROM on the device
hilton24 said:
Have you tried to install the stock ROM on the device
Click to expand...
Click to collapse
Thank you for answering,
Yes i tried but it doesn't work maybe i download a wrong zip file do you know where to download an other stock ROM file please?
NatashaJbl said:
Thank you for answering,
Yes i tried but it doesn't work maybe i download a wrong zip file do you know where to download an other stock ROM file please?
Click to expand...
Click to collapse
What carrier are you using? A lot of roms that are stock have to be a specific carrier... Why don't you try using CM11? Or is your phone 64 bit? Where are you from?
MrMike2182 said:
What carrier are you using? A lot of roms that are stock have to be a specific carrier... Why don't you try using CM11? Or is your phone 64 bit? Where are you from?
Click to expand...
Click to collapse
Im from Italy
Carrier: Vodafone
and my phone is 64 bit
NatashaJbl said:
Im from Italy
Carrier: Vodafone
and my phone is 64 bit
Click to expand...
Click to collapse
You should not be trying to put any of these roms on your phone since it's 64 bit and all of these roms on here are 32 bit... I think there is a stock rom somewhere on here that you can download to fix the phone but you need to make sure you have philz touch recovery installed first.
MrMike2182 said:
You should not be trying to put any of these roms on your phone since it's 64 bit and all of these roms on here are 32 bit... I think there is a stock rom somewhere on here that you can download to fix the phone but you need to make sure you have philz touch recovery installed first.
Click to expand...
Click to collapse
Ok thank u, yes i have the philz touch recovery n im looking for the stock ROM but i haven't found anything yet
NatashaJbl said:
Ok thank u, yes i have the philz touch recovery n im looking for the stock ROM but i haven't found anything yet
Click to expand...
Click to collapse
Here use this one Vodafone rom
Thanks for the file, It worked only for 1 hour then it crushed and reboot continuously. battery doesn't charge and the phone shows me a message telling me that i have a modified system so i can't update it
NatashaJbl said:
Thanks for the file, It worked only for 1 hour then it crushed and reboot continuously. battery doesn't charge and the phone shows me a message telling me that i have a modified system so i can't update it
Click to expand...
Click to collapse
All phones that have a rom or kernel that's not 100% stock is going to say modified... Go into recovery clear your caches which are the dalvic and cache and try to charge your phone while it's powered off... Don't try to do updates because you cannot ever get it to work since you installed philz touch recovery... That rom is the ONLY one available for your Vodafone there is no stock RUU to fix it I can't find one and neither could you so I would try your best make the rom I gave you work.
MrMike2182 said:
All phones that have a rom or kernel that's not 100% stock is going to say modified... Go into recovery clear your caches which are the dalvic and cache and try to charge your phone while it's powered off... Don't try to do updates because you cannot ever get it to work since you installed philz touch recovery... That rom is the ONLY one available for your Vodafone there is no stock RUU to fix it I can't find one and neither could you so I would try your best make the rom I gave you work.
Click to expand...
Click to collapse
I will do my best thank you very much
Is it working now?