Related
Hey guys, so I had MIUI since it came out and kept updating it every friday like I'm sure everyone else does that has it, but today I wanted to try out a Gingerbread ROM other than MIUI or CM7 so I went and tried to install Mosaic IV. I followed the tutorial on MobileTechVideos for installing it and when I got to the part where I had to install the zip from the sd card I did it and it got stuck at formatting partitions. So I waited a while, about ten minutes, then took out the battery and tried starting over from stock again. Then I realized that I was supposed to use a different kernel for Mosaic IV then the one Josh used in the video. So I downloaded that kernel and used that one instead of the one he used in the tutorial. And I couldn't get into recovery mode with it. So I flashed to stock again and redid the whole thing, this time I got into recovery and flashed it but it still got stuck at formatting partitions. So at this point I was like crap I have to get a different ROM. So I tried flashing Serendipity and that wouldn't install either. Then I tried MIUI again to at least get back to what I had earlier today, and I got an error while flashing the captivate-efsbackup zip in recovery. I have no idea what to do, all I want is to just get off of the stock firmware which im stuck with for now since I have to go to work in a little bit. If anyone can help it would be greatly appreciated. Thanks in advance
I had a similar problem, and the ultimate fix for me was this:
Flash back to eclair stock (which you did)
Master Clear (aka format internal sd - make sure to back up your stuff first!)
Install CWM (may have to go manually - renaming to update.zip and reinstalling packages)
Wipe dalvik cache and cache partition, as well as user data
Install a stable Froyo ROM (take your pick, preferably a full-wipe with no bootloaders)
Reboot to CWM and do a second dalvik/cache/user data cleaning
(If you're going GB)
reboot to download mode
flash stock GB (WATCH OUT FOR BOOTLOADERS!)
boot it up, let it settle, reboot to CWM
flash your GB rom.
(If not)
Go where you would go from a stable Froyo Rom.
That's how I got back from a messed up phone with GB bootloaders to a working Mosaic installation. I can't say it will definitely work for you, but it may give you some ideas.
+1 get clockwork recovery...you need to make sure the rom you are flashing is compatible with the version of CWR you are using.
For example a rom that needs to be installed with CWR3 you will need to install the zip presumably from CWR2. Pull the battery and reboot back to recovery - you should now be in the updated version of CWR. Then for safety sake - re install your zip.
Reboot and you should be all set.
I had lots of trouble going from 2.2 to 2.3. Flashing between 2.3 roms is very easy comparatively
milkytron said:
Hey guys, so I had MIUI since it came out and kept updating it every friday like I'm sure everyone else does that has it, but today I wanted to try out a Gingerbread ROM other than MIUI or CM7 so I went and tried to install Mosaic IV. I followed the tutorial on MobileTechVideos for installing it and when I got to the part where I had to install the zip from the sd card I did it and it got stuck at formatting partitions. So I waited a while, about ten minutes, then took out the battery and tried starting over from stock again. Then I realized that I was supposed to use a different kernel for Mosaic IV then the one Josh used in the video. So I downloaded that kernel and used that one instead of the one he used in the tutorial. And I couldn't get into recovery mode with it. So I flashed to stock again and redid the whole thing, this time I got into recovery and flashed it but it still got stuck at formatting partitions. So at this point I was like crap I have to get a different ROM. So I tried flashing Serendipity and that wouldn't install either. Then I tried MIUI again to at least get back to what I had earlier today, and I got an error while flashing the captivate-efsbackup zip in recovery. I have no idea what to do, all I want is to just get off of the stock firmware which im stuck with for now since I have to go to work in a little bit. If anyone can help it would be greatly appreciated. Thanks in advance
Click to expand...
Click to collapse
so your saying that you went to a gingerbread rom straight from MIUI? if that's true it failed because you didn't have the gingerbread bootloaders before you installed the rom
Sent from my Captivate
pwnerman said:
so your saying that you went to a gingerbread rom straight from MIUI? if that's true it failed because you didn't have the gingerbread bootloaders before you installed the rom
Sent from my Captivate
Click to expand...
Click to collapse
I did have the bootloaders, I went back to stock before I did anything just to be safe. I'm gonna try what the other guys said though right now, wish me luck haha
jmtheiss said:
I had a similar problem, and the ultimate fix for me was this:
Flash back to eclair stock (which you did)
Master Clear (aka format internal sd - make sure to back up your stuff first!)
Install CWM (may have to go manually - renaming to update.zip and reinstalling packages)
Wipe dalvik cache and cache partition, as well as user data
Install a stable Froyo ROM (take your pick, preferably a full-wipe with no bootloaders)
Reboot to CWM and do a second dalvik/cache/user data cleaning
(If you're going GB)
reboot to download mode
flash stock GB (WATCH OUT FOR BOOTLOADERS!)
boot it up, let it settle, reboot to CWM
flash your GB rom.
(If not)
Go where you would go from a stable Froyo Rom.
That's how I got back from a messed up phone with GB bootloaders to a working Mosaic installation. I can't say it will definitely work for you, but it may give you some ideas.
Click to expand...
Click to collapse
Alright so I have Andromeda 2.1 which is a froyo rom. Which method should I use to get to stock GB?
use Odin to flash gingerbread bootloaders then flash gingerbread roms
howtomen said:
use Odin to flash gingerbread bootloaders then flash gingerbread roms
Click to expand...
Click to collapse
I flashed the gingerbread stock rom and have it rooted with xcal's kernel, but when i flashed mosaic IV it got stuck at formatting partitions and i pulled the battery after about 15 minutes and then restarted my phone to find it stuck in a bootloop. So i had to start from stock again and now im back to gingerbread stock with root. I'm kinda scared to try again because it takes me like 30 minutes to get back to gingerbread stock with root. I think ill just stick with stock for a little bit
Hi all,
My dad has a galaxy s. Since the stock samsung firmware is pretty bad, I installed darky's ultimate rom v10.2 on his phone, about a week ago. I have a galaxy s2, running miui, and my dad liked the interface.. so he asked me: can I have that too?
So I said, sure! I wiped his phone with clockworkmod, and flashed the miui zip. (After backing up darky's firmware offcourse)
But.. after about 1 hour of usage, he didn't like miui anymore, so he asked me if I could restore to darky's rom... so.. I went to clockworkmod, and hit the restore button. Unfortunately, it gave an error, saying something about "can't restore boot"
I tried it again.. same error.
Luckilly, I had another backup, of the stock rom, before i flashed darky. So I tried to restore that backup..
I don't know what happened, but clockworkmod doesn't work anymore. Everytime i try to do something, it keeps giving errors about unable to mount this, unable to mount that, bla bla bla.
And the phone wont boot..
However, i'm still able to access download mode.
So i think it's possible to restore it completely, but can you guys give me some advice? What should I flash with odin, and can you provide a link?
I'm really hoping for a quick respond because my dad is not happy with his phone being "dead".
Thanks in advance!
Blupmans
Sent from my GT-I9100 using Tapatalk
Are you sure Miui is not based on something other then samsung? Maybe you should try and flash a stock firmware (e.g. 2.3.4), then root for CWM, and restore that way?
Ok, you have to know:
For MIUI you just need a GB-bootloader as base and you can easily flash MIUI through CWM. But MIUI (and CM7 too) don't use the RFS-filesystem as Samsung-based ROMs (they use MTD/yaffs2 as the Nexus). So you can't restore Darky easily.
But you can do this:
- Reboot into download mode (3-button-combo)
- Flash any Samsung-based stock-FW with Odin
- Flash any kernel which fits your GB-firmware and which includes CWM
- Restore your Darky-backup through CWM
For stock go to http://www.darkyrom.com/community/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
Download and follow the steps in the thread, voila, recovery done
If u wanna go back to Darky's u can check Darky's ROM 10.2 Resurrection. But just for a clean install i would flash a stock JVQ first and then install Darky's.
Thanks for the reply's everyone, gonna try it this evening, when i'm home
Sent from my GT-I9100 using Tapatalk
And don't forget to press the 'Thanks'-button(s).
dmcleod said:
For stock go to http://www.darkyrom.com/community/index.php?threads/odin-darkyrom-10-2-resurrection-gt-i9000.4272/
Download and follow the steps in the thread, voila, recovery done
Click to expand...
Click to collapse
This is no stock-ROM, it's modified by Ficeto.
IT'S ALIVE!!!!
Thanks man!
and.. because you like the thanks button so much, I clicked it for you ;-)
Problem!
My Galaxy S won't boot.
When I boot into recovery it says exactly what it says on blupmans galaxy s.
I am n00b in things like this.
Can someone write a step by step guide how to restore this phone on stock firmware?
When I put phone into download mode and connect it to odin3 1.82 it wont recognioze my phone.
Please HELP!!!
I will give you thanks
Phone is locked at Croatia- Vip
EDIT: Solved!
So I updated the MIUI on my Cappy from whatever I had before to 2.3.30 that is GB 2.3.7 from this location:
http://miuiandroid.com/community/threads/archived-miui-versions-captivate-gb.16558/
I didnt care for it so I downloaded SlimICS. I downloaded the base and the cappy essentials. Put them both on my internal sd. I factory reset, wiped data, cache and system and dalvic, just as i do for every phone i work on. I ran the SlimICS base and now it keeps rebooting and going back into recovery and doing this:
Finding update package...
Opening update package...
Installing update...
Slim ICS
Once Slim ICS pops up, it reboots and does it all over. I can yank the battery and manually go into recovery, but if i try to boot it up normal, it goes back into the loop. I am on CWM 5.0.2.7 also.
So what did i miss?
GB bootloaders most likely missing - flash 'em using Heimdall. And SlimICS doesn't have modem. So. Flash my ROM for a change may be.
Sounds like you just need to flash again. You have to do that when you are going from GB to ICS, and vice versa I believe.
And you flashed the base and the cappy essentials right? Not just the base
Sent from my SGH-I897 using xda premium
korockinout13 said:
Sounds like you just need to flash again. You have to do that when you are going from GB to ICS, and vice versa I believe.
Click to expand...
Click to collapse
trying to flash again just put it back in the loop. And I read that that does happen alot going from GB to ICS on the Cappy. But for Slim it didnt work.
Wdustin1 said:
And you flashed the base and the cappy essentials right? Not just the base
Click to expand...
Click to collapse
I never could get that far because it was the base that I started to install and it got bootlooped on, everytime it restarted, it went back into recovery and started to run the base again, and repeated boot loop. I read somewhere that teamhacksung's rom would get me over the GB to ICS bridge. This one here:
http://forum.xda-developers.com/showthread.php?t=1363760
It did the bootloop to, but when i yanked the battery and went back in and installed it a 2nd time, it didnt restart and installed correctly. After that I installed SlimICS. But I dont like it as much as i thought i would and now when i try to reinstall teamhacksung ROM, it errors out during the beggining of the installation. The MD5 is still fine. I dont think it likes the version of CWM recovery that SlimICS installed. I know CWMR went to an older version when i went from teamhacksung to SlimICS.
Flash glitch kernel first. Also, don't use the builds from that thread, it is old. Just flash the latest CM9 nightly
Swyped from my ICS Samsung Captivate
Stuck in A boot loop after flashing paranoid rom to cappy i897
I downloaded all needed files to internal SD just as the (how to upgrade the captivate i897 to Paranoid ROM said to do )
wipe data factory reset,wipe cache,selected install zip zip>package (pa_captivatemtd-1.99-13AUGUST2012.zip, md5sum: cc03bacf0f07a94bf25b482d64b94e63) then it started boot looping / att screen twice then android guy ,, then falling over with exclamation point in the middle of him , let it go considering options of 3 button combo weren't working ,, beside guide said 5-10 min to install then it made it to devil kernel installed gapps >> (gapps-jb-20120726-signed.zip, md5sum: f62cfe4a827202899919fd932d5246d7) now back in the boot loop again>>
i did make a nandroid backup but cant seem to get into cwm recovery or download mode . I did follow that guide to a tee.
any help or suggestions on this i would greatly appreciated if this post in wrong spot sry im new.
Also stuck in bootloop reverting to Gingerbread
I am also stuck in boot loop after attempting to restore back into Gingerbread.
Here's how I got in this mess: I had been running Gingerbread on my Captivate for several months (rooted). I decided it was time to try upgrading to Jelly Bean (cm9 version). I installed ClockworkMod Recovery and that appeared to be working, so I made a NANDroid and proceeded to install CyanogenMod on my phone.
It booted OK, but I didn't like it and figured I'd just revert by restoring my NANDroid. Only thing is, it didn't restore correctly and my phone was stuck at the initial AT&T "bars" screen.
So I attempted to reboot in recovery and restore my latest update.zip. This did not seem to help at all. My phone would just boot to the AT&T screen and be stuck there. I checked to see adb was reachable behind the scenes but it wasn't.
After that I loaded Odin 1.85, downloaded a copy of the stock Captivate ROM, unzipped it and loaded it to my ROM (using the method described in this link I'm not allowed to show you because I'm a new user), more or less.
Odin said it was successful, but the phone is now still stuck in a boot loop. The ClockworkMod Recovery options are gone from the recovery menu. Now it looks like my stock recovery menu. There are some diagnostics on the recovery screen:
-- Copying media files --
E: failed to mount /dbdata (Invalid argument)
E: copy_dbdata_media: Can't mont /dbdata
your storage not prepared yet. please use UI menu
for format and reboot actions.
Meida files copy failed.
# MANUAL MODE #
-- Applying Multi-CSC...
Installing Multi-CSC
Applied CSC-code 'ATT'
Successfully copied multi-CSC.
-----
the bold text indicating errors appears in orange.
I tried "wipe data/factory reset" and "wipe cache partition" and rebooting. This had no apparent effect. The Captivate still continues to loop on reboot.
What next? It seems like it's missing something it needs to boot that's not in the standard Gingerbread Captivate image I downloaded with Odin. What else do I need to do? Keep in mind that right now the only way I can get files onto the phone is Odin (or similar) via the USB port. The phone never gets booted enough to get to it with adb, let alone mounting as a drive on my computer.
Thanks
Reply Back.
HG_User said:
I am also stuck in boot loop after attempting to restore back into Gingerbread.
Here's how I got in this mess: I had been running Gingerbread on my Captivate for several months (rooted). I decided it was time to try upgrading to Jelly Bean (cm9 version). I installed ClockworkMod Recovery and that appeared to be working, so I made a NANDroid and proceeded to install CyanogenMod on my phone.
It booted OK, but I didn't like it and figured I'd just revert by restoring my NANDroid. Only thing is, it didn't restore correctly and my phone was stuck at the initial AT&T "bars" screen.
So I attempted to reboot in recovery and restore my latest update.zip. This did not seem to help at all. My phone would just boot to the AT&T screen and be stuck there. I checked to see adb was reachable behind the scenes but it wasn't.
After that I loaded Odin 1.85, downloaded a copy of the stock Captivate ROM, unzipped it and loaded it to my ROM (using the method described in this link I'm not allowed to show you because I'm a new user), more or less.
Odin said it was successful, but the phone is now still stuck in a boot loop. The ClockworkMod Recovery options are gone from the recovery menu. Now it looks like my stock recovery menu. There are some diagnostics on the recovery screen:
-- Copying media files --
E: failed to mount /dbdata (Invalid argument)
E: copy_dbdata_media: Can't mont /dbdata
your storage not prepared yet. please use UI menu
for format and reboot actions.
Meida files copy failed.
# MANUAL MODE #
-- Applying Multi-CSC...
Installing Multi-CSC
Applied CSC-code 'ATT'
Successfully copied multi-CSC.
-----
the bold text indicating errors appears in orange.
I tried "wipe data/factory reset" and "wipe cache partition" and rebooting. This had no apparent effect. The Captivate still continues to loop on reboot.
What next? It seems like it's missing something it needs to boot that's not in the standard Gingerbread Captivate image I downloaded with Odin. What else do I need to do? Keep in mind that right now the only way I can get files onto the phone is Odin (or similar) via the USB port. The phone never gets booted enough to get to it with adb, let alone mounting as a drive on my computer.
Thanks
Click to expand...
Click to collapse
While searching threw all this mess on this site and various other :
I did stumble on something that might help u get your cwm
mode Look up Captivate Q&A the scroll to T, Russel thread has file needed to get your cwm mode working using rageagaistcage method.
Odin has multi file upload for stock alone check to make sure you selected right one . then just reflash should be good
mine i examine really thoroughly and figure out i try to jump to high .
i had stock then firefly then darkfire which is based off i900 <> Cappy rom bad <>idea on my part i try to jump to paranoid rom from darkfire '
don't think files were save to SD internal card - download section instead so firmware lost track of it self .
reviewing errors made on my part order 2 jig for my 2 cappys
my plan use jig get into download flash back to stock using odin one click using kies flash to froyo and stick with it for another six months
while reading everything i need to know about flashing that high up , besides that rom will become more stable less bugs and it will give me
time to see what errors occurs with this phone model on that rom last time i check there was only 7 posted user using it
again i was trying to flash paranoid rom for Samsung captivate SGH_I897'' I hope you get your issue resolved.
If u try one click unbrick and on win xp uninstall kies the drivers will not work together log in to administrator account <> just Google it if not on welcome screen there a few ways to get into that account,, but that did work for me on my cappy . let me know how u make out. ??
---------- Post added at 06:38 PM ---------- Previous post was at 06:27 PM ----------
321321wrick said:
While searching threw all this mess on this site and various other :
I did stumble on something that might help u get your cwm
mode Look up Captivate Q&A the scroll to T, Russel thread has file needed to get your cwm mode working using rageagaistcage method.
Odin has multi file upload for stock alone check to make sure you selected right one . then just reflash should be good
mine i examine really thoroughly and figure out i try to jump to high .
i had stock then firefly then darkfire which is based off i900 <> Cappy rom bad <>idea on my part i try to jump to paranoid rom from darkfire '
don't think files were save to SD internal card - download section instead so firmware lost track of it self .
reviewing errors made on my part order 2 jig for my 2 cappys
my plan use jig get into download flash back to stock using odin one click using kies flash to froyo and stick with it for another six months
while reading everything i need to know about flashing that high up , besides that rom will become more stable less bugs and it will give me
time to see what errors occurs with this phone model on that rom last time i check there was only 7 posted user using it
again i was trying to flash paranoid rom for Samsung captivate SGH_I897'' I hope you get your issue resolved.
If u try one click unbrick and on win xp uninstall kies the drivers will not work together log in to administrator account <> just Google it if not on welcome screen there a few ways to get into that account,, but that did work for me on my cappy . let me know how u make out.
There also Ginger Bread Boot loaders Needed for it to start up Correctly - i personally don't know that much bout gingerbread rom i didn't like it as much as froyo WiFi issues'' the the stock odin should erase all info on your part thou 'e use Is OCD 1 i897UCJF6>lowercase work every time for me.
cept now because my usb is not able to charge phone or enter download mode or recovery which leaves jig option .
Click to expand...
Click to collapse
HG_User,
U can't go back to GB (or froyo/eclair) from CM, MIUI, ICS, JB, AOSP etc., etc. without using Odin or Heimdall---because of the different partitions used---Stock firmware is bml/rfs and all the AOSP etc etc are mtd/yaffs(2).
And u can only restore a backup when u r back running the base rom where u made the back up.
Use this...Stock i897ucKK4 GB 2.3.5 with or without bootloaders... http://forum.xda-developers.com/showthread.php?p=18370912
This kk4 should get u going. Then u can use Odin to flash Corn Kernel to get a cwm back...:thumbup:
Sent from my SGH-I897 using xda premium
... one step on the way: Back to Eclair
thanks for the advice. Ultimately, I decided I should use Odin 3 1-click to revert back to original (2.1 Eclair) firmware that I found on the first post of thread titled
[STOCK ROM] Odin3 One-Click Downloader and Drivers CAPTIVATE ONLY
This is a huge step forward because it makes my phone work, but it's also a step back in time to the early Eclair days.
Now my next step is to upgrade back to Gingerbread...
Edit: Thanks to all who pointed me in the right direction. I took the phone back to Eclair then used Samsung KiesMini (twice) to get it back to Gingerbread. After re-rooting and removing the AT&T Bloatware, it works fine again. I might try upgrading again to ICS or JB, but I didn't like Cyanogen 9 at all. Maybe I'm just used to the way AT&T polishes the UI, but Cyanogen didn't appeal at all. Now looking for a relatively polished but lightweight ICS or JB version... Also, it would be nice if when I upgrade it preserves the installed apps and what's on my home screens, but that seems unlikely going from AT&T-branded Gingerbread to an independent ICS or JB.
Hi guys,
I just need some short advise:
My dad flashed CM10 nightly a few days ago.
Before that he had a stock froyo rom (i don't know which version exactly) but with root and CWM.
Flashing CM10 worked but he had same bugs (baseband deleted, reboots every 10 minutes), so he flashed CM9 stable hopeing to get these things right. but it didn't, baseband was still gone. So he decided to restore his nandroid backup and go back to his froyo stock.
but that ended in a total disaster and the phone won't boot anymore. it is stuck at the white "Galaxy S" screen (before boot animation).
My dad said, that he tried to restore his backup a 2nd time. but he got many errors including "unknown volume for path /data"
He is a little bit frightened that he could brick his phone completely so he asked me for help.
Well, I don't know what to do besides flashing a stock gingerbread rom + kernel +baseband/modem with Odin.
Am I right with this? Or do you guys got some other advise for me.
thanks for help
try factory reset must done after restore
are you sure?
shouldn'd this be done before restore?
by doing a wipe, I would need to do 2 restors in order to keep my apps..
As the partition layout of CyanogenMod and stock are different, and thus stock partition layout is needed, you have to flash stock using Odin with pit512 and partition enabled. After that restore should work as well.
Besides: If baseband is missing in CM, try to flash a CM modem.
Sent from my GT-I9000 using xda app-developers app
Knobibrot said:
Well, I don't know what to do besides flashing a stock gingerbread rom + kernel +baseband/modem with Odin.
Am I right with this? Or do you guys got some other advise for me.
thanks for help
Click to expand...
Click to collapse
yes, you need to be on a GB 2.3.6 to upgrade to CM, so use a recovery kit , link below on MY android collections to recover and have a working phone before think moving on to CM
Galaxy S I9000 won't boot after cm10
Hi
Sorry if this is in the wrong place, I've searched, but have no phone now, it won't boot after installing CM10 28/12/2012. It was running, but I wanted to do a nand restore, it said it couldn't find the backup.
It now won't boot, it's stuck on the original Galaxy S GT-I9000 boot screen
This is really urgent (I know... like everything else)... can anyone help me PLEASE??
Thanks
Dear friends,
Little background. I was on CM10 stable, but decided to I update to CM10.1 M1, After the update, had no market, however, so I tried to downgrade to CM10 stable and it bricked. So .. back to stock it is! Now I am having trouble getting out of stock. I am not new to flashing, but I never had this kind of a persistent problem.
The short summary of what I get no matter what I try is: Every kernel that is not the stock Eclair kernel has boot-animation messed up (random lines of color on screen), and I cannot enter recovery - I sometimes can boot sometimes cannot.
Steps I have taken
I went back to stock Eclair rom + non-root kernel (LINK).
I rooted (LINK)
But when I tried to update kernel to allow CWM, it bricked my phone. So back to stock, again!
I tried this a few times. Now, the latest attempt, I tried the stock 2.3.5 rom + rooted, CWM kernel (LINK... I get the phone running, but I cannot get into recovery, and no utility that has "reboot to recovery" has managed to get me into recovery.
The plea
All I want is CWM, so I can install what I want. Without it, I am stuck with Odin one-click and Odin flashable packages (Heimdall does not want to work right for me - the drivers are messed up - and trying to fix those brkeas my Odin drivers).
I have no data on the phone at the moment, I can reinstall everything if need be .. but I am out of ideas besides keep trying different roms and kernels until something gives me CWM and I am free again.
I have AT&T GB bootloaders.
thanks for any help, I will try to provide any additional info I can.
dozyaustin said:
Dear friends,
Little background. I was on CM10 stable, but decided to I update to CM10.1 M1, After the update, had no market, however, so I tried to downgrade to CM10 stable and it bricked. So .. back to stock it is! Now I am having trouble getting out of stock. I am not new to flashing, but I never had this kind of a persistent problem.
The short summary of what I get no matter what I try is: Every kernel that is not the stock Eclair kernel has boot-animation messed up (random lines of color on screen), and I cannot enter recovery - I sometimes can boot sometimes cannot.
Steps I have taken
I went back to stock Eclair rom + non-root kernel (LINK).
I rooted (LINK)
But when I tried to update kernel to allow CWM, it bricked my phone. So back to stock, again!
I tried this a few times. Now, the latest attempt, I tried the stock 2.3.5 rom + rooted, CWM kernel (LINK... I get the phone running, but I cannot get into recovery, and no utility that has "reboot to recovery" has managed to get me into recovery.
The plea
All I want is CWM, so I can install what I want. Without it, I am stuck with Odin one-click and Odin flashable packages (Heimdall does not want to work right for me - the drivers are messed up - and trying to fix those brkeas my Odin drivers).
I have no data on the phone at the moment, I can reinstall everything if need be .. but I am out of ideas besides keep trying different roms and kernels until something gives me CWM and I am free again.
I have AT&T GB bootloaders.
thanks for any help, I will try to provide any additional info I can.
Click to expand...
Click to collapse
Messed up screen = wrong bootloaders. Flash Odin KK4 with bootloaders
From there, follow this link.
Finally, you can get back up on CM10.1 - Btw, you had no market cause you didn't flash their Gapps.
UPDATE .. ugh that took a while:
1) From the master list LINK, wet back to 2.1, I897UCJF6
2) From the same thread installed I897UCKF1 with bootloaders
3) rooted: LINK (I know -not XDA)
4) removed the 3e recovery lock (LINK) - this did not seem to work, but I did do it.
5) installed Speedmod kernel from here LINK - this did not boot, but it did install CWM
6) installed CM10.0 Stable from SD cadr - twice
7) installed gapps
8) just did my first boot to CM10.
This is both a record for myself for later, and for anyone else that may find this useful.
BWolf56 said:
Messed up screen = wrong bootloaders. Flash Odin KK4 with bootloaders
From there, follow this link.
Finally, you can get back up on CM10.1 - Btw, you had no market cause you didn't flash their Gapps.
Click to expand...
Click to collapse
Ooooh. I learn something new every day! Thanks.
Sent from my SGH-I897 using xda app-developers app