[Q] frequent rebooting - XPERIA X8 Q&A, Help & Troubleshooting

just installed the latest rom of gingerdx v009 and overclocked it to 768-122Mhz, recently after three days after the installation i experience some changes regarding the performance of my phone it becomes laggy and worst is it is rebooting by itself.. what seems to be the problem? anyone please help me regarding this issue. thanks in advance.

Full wipe if you came from another ROM.
Sent from my X8 using XDA App

Remove overclock.
Sent from my X8 using XDA Premium App

edward091810 said:
just installed the latest rom of gingerdx v009 and overclocked it to 768-122Mhz, recently after three days after the installation i experience some changes regarding the performance of my phone it becomes laggy and worst is it is rebooting by itself.. what seems to be the problem? anyone please help me regarding this issue. thanks in advance.
Click to expand...
Click to collapse
Don't set 768 MHz and instead set 748.8 MHz, if that doesn't work set 729 and just keep on downgrading until phone doesn't randomly reboot when playing games. As for slowness, check the slowness thread on x8 dev foeum for a fix.

Related

Which is the best kernel for ColdMod Rom?

Hi guys,
Just yesterday i loaded Coldmod Rom... am loving the rom but it lags sometimes... i was wondering if there are any kernels recommended for Coldmod rom that will keep the battery life the same (or make it better) and help get rid of the lag that i get sometimes....
Quadrant score is coming to only 930-980.. im on the same kernel that flashed with the Coldmod 2.0 (default)
Thanks
Sent from my GT-I9000 using XDA App
Quandrant sucs , my phone is very fast more faster than JPY(1600~) score and with ColdMod 1200~ so dont trust those . i am using Fugu kernerls , about my battery 2 days ( playing games , music internet)
i think its good, so just try it
Yeah i was just reading up on that.... thanx bro
Sent from my GT-I9000 using XDA App
I tried flashing the fugu ultra kernel... now my phone wont detect the sim card
What settings should i use when usinf fuguapp?
Also i want to know how i can revert it back to the settings that are by default when i flash coldmold rom...
Sent from my GT-I9000 using XDA App
Another problem im getting is that the language reverts to espagnol instead of english after every reboot.
This happens only after i use fugu apps... how can solve this issue?
Sent from my GT-I9000 using XDA App

[i9001]GTA III crashes after some gameplay

Hi all.
I'm having this issue with gta iii. It crashes after some gameplay and reboots my phone. Could it be that this is because i have a custom rom installed?
Thanks for your time,
Screen!
Sent from my GT-I9001 using XDA App
screen said:
Hi all.
I'm having this issue with gta iii. It crashes after some gameplay and reboots my phone. Could it be that this is because i have a custom rom installed?
Thanks for your time,
Screen!
Sent from my GT-I9001 using XDA App
Click to expand...
Click to collapse
i had the same issue on stock rom. version 1.0 didn't have that problem, but as soon as i updated it to higher version all of them had this problem. so try to install the first release, it might work for u.
try another kernel and disable oc.
if the problem cant solved, try another rom with combination other kernel.

Re: [CM7/MIUI Kernel][KANG][APR18][NEW] ETaNa v3.0.y with Spica (c) OTF ToolKit

Re: [CM7/MIUI Kernel][KANG][APR18][NEW] ETaNa v3.0.y with Spica (c) OTF ToolKit
Am new to android so plz correct me if am wrong.
1.Does this kernel have any bugs?
2.And if yes which would be a stable kernel for cm 7
Am experiencing network drops and battery is acting kinda weird like one moment it will be on 90 and the other it will be 80 ( and yeah I have calliberated after charging it to 100% ). Is there anyone else with this problem.. sorry I didn't have the patience for reading this entire thread. ( sorry for my bad English. ) So please help..
Sent from my Optimus 2X using XDA
Najmuddin NP said:
Am new to android so plz correct me if am wrong.
1.Does this kernel have any bugs?
2.And if yes which would be a stable kernel for cm 7
Am experiencing network drops and battery is acting kinda weird like one moment it will be on 90 and the other it will be 80 ( and yeah I have calliberated after charging it to 100% ). Is there anyone else with this problem.. sorry I didn't have the patience for reading this entire thread. ( sorry for my bad English. ) So please help..
Sent from my Optimus 2X using XDA
Click to expand...
Click to collapse
Hello I installed this kernel looks on cm7 and have not had any problems, bugs or viruses, is very stable and has frequent updates!
From what I have read in that thread, that kernel has a bug that makes /system read-only. There's also a workaround to fix it, though.
Sent using some sticks and gum, just as McGyver would
DrummerMuppet said:
From what I have read in that thread, that kernel has a bug that makes /system read-only. There's also a workaround to fix it, though.
Sent using some sticks and gum, just as McGyver would
Click to expand...
Click to collapse
Not for me I always can set R/W for /system this kernel work like a charm.
But what does R/W has to do with battery level fluctuations.. network is kind of stable now. But the battery level fluctuations are occurring as usual. Am I the only one with this kind of weird problem ...
Sent from my Optimus 2X using XDA
Really good kernel.. that's what holding me back from flashing another kernel.. please some one help..
Sent from my Optimus 2X using XDA
Yes this Kernel is good, but he have the r/w issue...
Because that, i use the ETaNa 2.6 Kernel. He runs also very nice and have a good battery life
Perhaps the DS battery driver was causing the problem with the weird battery readings... just flashed a kernel without it everythings back to normal.
Sent from my Optimus 2X using XDA
Cydras said:
Yes this Kernel is good, but he have the r/w issue...
Because that, i use the ETaNa 2.6 Kernel. He runs also very nice and have a good battery life
Click to expand...
Click to collapse
Try to install new superuser from play store it solved my problem about system R/W.

[Q] E15a-11w48: which ROMs?

Hi folks,
I didnot know my X8 can be upgraded to newer android version until recently. After bunch of reading I understand that:
* my X8, with the date of production is 11W48, cant be boodloader unlocked by normal tools (someone with the same phone had it unlocked with SETool2)
* upgrading options for me is custom ROM based on original kernel (correct me if I am wrong).
So after digging around, I have:
* rooted the phone (using SuperOneClick v 2.3.3)
* installed xRecovery (http://forum.xda-developers.com/showthread.php?t=878426)
* installed CWM Recovery using xRecovery
* installed Froyo 2.2.1 (http://forum.xda-developers.com/showthread.php?t=964223)
While I am now quite excited that my phone is equipped with android 2.2 now, I want to have other advice/suggestion regarding their enormous experience with X8. Since my phone is not bootloader unlocked, please tell me which ROMs that I can flash without requirements of bootloader unlocked? If there is ROMs with android 3 or 4 (ICS) that would be excellent.
Thanks in advance,
D.
Android 3 z for tabs nd 4 needs unlocked bootloader.U can try gdx for stock kernel or primehd for stock or u can use fde3 for stock kernel nd its a very good rom too
PRESS THANKS
Sent from my E15i using xda premium
gingerxperia,it has the stock look and best antutu benchmark score for 2.3 andtoid
pm me for link
Sent from my E15i using xda app-developers app
U can unlock ur bloader for 24$usd check my pagw
Sent from my E15i using xda premium
Please be aware that unlocking bootloader can hard brick your sweet phone. Refer earlier threads.
Sent from my X8 using xda app-developers app
Espcially when phone is after 11W33 series. Refer earlier threads.
Sent from my X8 using xda app-developers app
Try gingerdx or fde +3. They are both for stock.
Is gingerxperia really good? Is it 2.3.7 too?
Sent from my X8 using xda premium
U'd rather do a search...there is a thread by lucastan96 about all these :thumbdown:
Is it important how did i send this?
i used it
i suggest to search for:
xperience
Gingerdx
cyanogenmod7
shinengine
kuyaICS
they can be flash to your phone with your stock kernel and locked bootloader
Thanks for all of your suggestions. After searching, I have found some ROMs that might be working for me:
* GingerXperia 22, 24/24b
* GingerDX
* ICS
* FroyoPro
* CyangenMod
* LinuXperia
* hyperOid
* MIUI
Based on other comments, gingerxperia seems to have better benchmark than GingerDX, so I gave it the first try. Unfortunately gingerxperia 24b did not work for me: I was stuck at the rebooting loop with gingerxperia logo and startup animation. Maybe I did something wrong. It even deleted my CWM recovery, so the only choice for me was to use PCCompanion to repair the phone back to stock ROM.
After that, I gave GingerDX a try, and now I am playing with it. At least GingerDX is a big step up from Froyo 2.2.1. I will try other ROMs as well and will report back.
Ftwisawesome said:
U can unlock ur bloader for 24$usd check my pagw
Sent from my E15i using xda premium
Click to expand...
Click to collapse
Thanks my friend, I think I am happy with current stock-kernel ROMs. Once I find a need to go higher with android 3/4, I will try your service. Anyway, where is your page with the service?
-=bryan-= said:
i suggest to search for:
xperience
Gingerdx
cyanogenmod7
shinengine
kuyaICS
they can be flash to your phone with your stock kernel and locked bootloader
Click to expand...
Click to collapse
kuyaics???
dukevn said:
Thanks for all of your suggestions. After searching, I have found some ROMs that might be working for me:
* GingerXperia 22, 24/24b
* GingerDX
* ICS
* FroyoPro
* CyangenMod
* LinuXperia
* hyperOid
* MIUI
Based on other comments, gingerxperia seems to have better benchmark than GingerDX, so I gave it the first try. Unfortunately gingerxperia 24b did not work for me: I was stuck at the rebooting loop with gingerxperia logo and startup animation. Maybe I did something wrong. It even deleted my CWM recovery, so the only choice for me was to use PCCompanion to repair the phone back to stock ROM.
After that, I gave GingerDX a try, and now I am playing with it. At least GingerDX is a big step up from Froyo 2.2.1. I will try other ROMs as well and will report back.
Click to expand...
Click to collapse
Wiped data?
Sent from my E15i using xda premium
Really? There's ics for stock kernel that's ok for everyday use on x8?
I know devstaff's making one but it's still in the beta stages.
Sent from my X8 using xda premium
ElmirBuljubasic said:
Wiped data?
Sent from my E15i using xda premium
Click to expand...
Click to collapse
I did. I did before AND after flashing the ROM. When rebooting, it said something like you have to reintall recovery otherwise you would not be able to get to recovery again, and I did. I guess that step deleted my CWM. Then I rebooted and got stuck in the startup screen. Cant get to recovery anymore.
I believe I did something wrong - I am totally newbie for this. Anyway, I will give it a try later. For now GingerDX is working quite well for me.
ngoralph said:
kuyaics???
Click to expand...
Click to collapse
Might be this -> forum.android.com.pl/f257/kuya-ics-v5-stock-kernel-kontynuacja-kuyadroidv4-5-4-a-155870/ (sorry I am not allowed to post external links now)? I am surprised that no post in xda-developers mentions about it.
cascabel said:
Try gingerdx or fde +3. They are both for stock.
Is gingerxperia really good? Is it 2.3.7 too?
Sent from my X8 using xda premium
Click to expand...
Click to collapse
OK, for some reasons I cant get my GingerDX to have overlock enable, so I gave gingerXperia the second try, and now it works! It is 2.3.7, and the benchmark for the default system (without any modification) is about 1600 compared with about 1300 of GingerDX. I am playing with the OC settings now, but it seems that my max stable can only be 768 MHz (stock was 600 MHz), with the score ~ 2000.
my x8 her unlocked bootloader though 11W38 but I do not know may have been lucky. can try to stock kernel Shin7
Have U tryied XGin v6.2 very fast, stable and beautifull
http://forum.xda-developers.com/showthread.php?t=1378468
dukevn said:
OK, for some reasons I cant get my GingerDX to have overlock enable, so I gave gingerXperia the second try, and now it works! It is 2.3.7, and the benchmark for the default system (without any modification) is about 1600 compared with about 1300 of GingerDX. I am playing with the OC settings now, but it seems that my max stable can only be 768 MHz (stock was 600 MHz), with the score ~ 2000.
Click to expand...
Click to collapse
Even on gdx 768 seems to be the limit. No bugs on gingerxperia? What ver are you using?
Sent from my X8 using xda premium

[Q] X8 reboot

Hi xda i have an x8 with kernel alf v8 and firedroiod ,overcloock at 768 .
Yesterday my phone has reboot when i was on internet ,i was think that is hapening and
i entred again and my phohe has reboot again.
I was make full wipe but the phone is sit rebooting plis teel me what to do that my phone to not reboot.
I am a medium user on android.
Change the cpu frequency.
GeorgeBejan said:
Hi xda i have an x8 with kernel alf v8 and firedroiod ,overcloock at 768 .
Yesterday my phone has reboot when i was on internet ,i was think that is hapening and
i entred again and my phohe has reboot again.
I was make full wipe but the phone is sit rebooting plis teel me what to do that my phone to not reboot.
I am a medium user on android.
Click to expand...
Click to collapse
your hardware simply cannot stand that oc. lower the frequency.
I have already tried it at 600 Mz
Then start over. Flash kernel again and reflash Rom and be sure to use compatible kernel and flash if there are any fixes to be flashed
Sent from my XPERIA X8 using xda premium
WLOD
Sent from my E15i using xda app-developers app
Thancks.
I have change the kernel now is alfs V9c ans rom is firedroid 2.4
The phone is stil restarting but not so frecvent.

Categories

Resources