Hi,
I managed to get Android working but noticed the orange led keeps active. This is when the TD2 is booting up with linux kernel.
Also when charging the Orange led keeps active, incomming phones, sms and mails the led is not changing and keeps orange.
When browsing the forum I found a couple posts about the led and led configuration that is possible but none seems to speak about the problem I am having at the moment.
It looks like the battery power is out of power within 1 night in this situation where this is normal about 3/4 days in standby with windows mobile.
Is there anything that I am doing wrong or that I misread somewhere?
Regards,
Dennis
Did you find Andriod is better than Windows OS that come preinstalled?
I am new to the Windows Phone here and also to this fourum.
thank you
i think that's normal. With me it happens the same thing.
Related
I want to be able to disable the flashing green LED, telling me the phone is on. And I want to disable the flashing blue LED, telling me that bluetooth is on, etc. Is there a way to do this without also disabling vibrate mode (which I know has been an issue on some other phones)?
Thanks
Try this reg edit:
Hkey_Local_Machine/Drivers/Builtin/AllLEDMgr
Change the Index value from 1 to 0
Appreciate the answer. Works perfectly. Absolutely no LED blinking
EXCEPT now it won't vibrate at all.
Anyone know how to fix that?
How about KaiserNotifications for this?
http://www.modaco.com/Kaiser-Notifications-t259413.html
Kaiser Notifications (for HTC Tytn II only)
This program allows you to change the way the Kaiser flashes it's LED's when you have a Mobile signal/Bluetooth/Missed calls for the left hand LED, and New emails/SMS text messages on the right hand LED.
By using the right LED for SMS/Emails you can use the brighter blue LED to really get your attention should a text or email have arrived when you were out of sight of the phone.
You can also turn off all annoying flashes, useful for night time or when watching a video.
Click to expand...
Click to collapse
Sort of for AT&T
^This may work better on the HTC units compared to AT&T. On an AT&T device it does disable all of the LEDs without disabling the vibrate. However, the LEDs are not on the same side of the two units nor do they mean the exact same thing. Finally there appears to be a very strange mapping between the LED indicated in the program and the LED that actually gets affected. Definitely crossed wires a bit, nonetheless, still effective.
Hello!
Have anyone noticed that when disabling LEDs (using this tweak) TomTom stops receaving GPS data? Any other GPS software works fine!
Regards Risto
I installed Kaiser Notifications and it works great!
Ok, I didnt try that. I just tryed that registry setting!
Risto
joeonsunset said:
How about KaiserNotifications for this?
http://www.modaco.com/Kaiser-Notifications-t259413.html
Click to expand...
Click to collapse
Absolutely great!
no2chem nueled will do it all and more
All ready done many times over. Cab installer
http://forum.xda-developers.com/showthread.php?p=1954259
acehole said:
All ready done many times over. Cab installer
http://forum.xda-developers.com/showthread.php?p=1954259
Click to expand...
Click to collapse
Ugh, except it won't uninstall and for me in WM6.1 it starts blinking and never stops, ever.
wow, this topic has been dead for over a year lol
Hi I am running Ruu_Signed_Duttys_WM6.1_5.2.19700_Hybrid_V2_1_64.08.21_CubeV2 ROM.
And everytime I get an incomming text message or e-mail the backlight comes on.
This happens even after you put it into standby and none of the other buttons will wake it only the power button.
i think that is by default and if u want the phone to wake by pressing any key than u have to make that change under settings.
It should not do that, the last ROM I used did not have that issue. It may not be the ROM I would like to know if anyone else has this problem.
Hi everyone..is there really no way to disable the screen turning on when a text or e-mail comes in. When using a WM6.1 ROM, I have tried different ROMs and they all the doing the same. It seems this should be something that can be configured.
Any input from the experts...if not I will go back to WM 6.0
I didn't have it happen with L26 v4 ROM - it does with Dutty's and it does with Death v3. I have heard from others in those threads who say that it does not happen to them. Some have said that the BBCONNECT program 4.0.0.92 is the solution - I have not bothered to search for or try yet. For me , right now, the common thread seems to be AT&T based ROMs
Arghhhhh....I hate to step back into the dark ages but that issue really bugs me. Knowing that my phone is in my case and everytime and e-mail comes in the screen turns on for 10sec....that accounts for the my short battery life.....And I only want to run the ROM's from Dutty he does really great work....wish I knew half of what he does. I might be able to fix it myself...That then brings the question why certain ROM's an not others...
I will leave that question to the experts.
I think it does this because it is putting an alert notification on the screen... I disabled those on mine and they still seem to come on the screen!!
It's so annoying to have to deal with your emails and at the same time have to dismiss countless notifications!!!
Same annoying problem here.
WM 6.1, and every setting in 'sounds & notifications' fails to show results.
Whether I disable or enable the tone, the showing of a message, or the vibration.. no dice: it keeps waking up from standby mode.
i remember some else asking this question as welll... and i think someone was talking about changing something in the the registry, but i am also interested in this. it would come in handy when i have to put my phone in standby for a long time.
bump
I too have this same issue. I've had my new ROM for several months and love it, but I would like to know how to stop the backlight from turning on everytime an email is received.
It never used to do this, however I am pretty sure the backlight always came on for new text messages.
I can deal with the text messages. However, I run blackberry connect for my work email. Having the backlight come on for each email obviously kills the battery life.
I know if can be disabled as it was before. The question is how? Is there a registry setting?
Found a new version on Modaco...don't know whether anyone noticed:
http://www.modaco.com/index.php?automodule=downloads&showfile=2400
Kaiser Notifications (for HTC Tytn II*)
Version 2.02
* This should also work on the HTC Touch Cruise, please let me know if you try it and it works okay. Works with Windows Mobile 6.1 and the .NET compact frame 2.0 or 3.5.
Version 2.02 - Fixes an error relating to date time parsing when using certain cooked ROMs. If you do not have this problem no need to upgrade.
Whats new in version 2.0?
Audio and vibrate reminder alerts for new items
Version 2 now allows you to add audio and vibrate reminder alerts for unread items. Most mobile phones do this and I started to miss this on the Kaiser. Mobile phones will intermitently beep/vibrate if you have new items but haven't seen them, whereas Windows Mobile generally sounds once when the item arrives but gives no additional sounds after that and leaves it to a flashing LED to get your attention. With this version your Kaiser will play a wav file of your choice and/or vibrate every so many minutes for new items.
To avoid battery drain and annoying those around you in your absence, the phone will increase the time span between reminders, the default is: Item arrives, phone alerts as normal. If after 5 minutes you haven't read the message, it will play the selected wav file and/or vibrate. If the message still goes unread it will then alert again after waiting for 10 minutes, then it will alert after a wait of 15 minutes, then 20 minutes, all the way up to 60 minutes, where it will then alert every hour. These settings are configurable.
Off schedule
You can now set a period where the Kaiser Notification program should not interupt you, typically this would be used for overnight. LEDs stop flashing, and no alerts are played for unread items. You can also select to turn the mobile phone off during this period which is great for saving battery power and knowing you are not going to be woken by a ringing phone.
What's fixed?
When roaming onto networks the LED will now flash normally.
What's still broken?
I've had no joy finding out how to flash the LED amber. You may still select amber as an option, however it will flash green. Hopefully I will get to the bottom of this soon.
As per a few requests I have not been able to adjust the flash rates for the LED, or have them light static while charging.
Installation Instructions
The program must be installed on 'Device' to work, it currently does not work if installed on storage card.
1) Copy the cab file to the device and run it. Install to device and not a storage card. If you have the first version it will be removed automatically.
2) From Programs click the new icon for 'Kaiser Notfication Setup'.
3) On first running the setup program the LEDs will automatically be set to the pre-defined defaults, change as required. Set up a schedule and reminder alerts as required.
A link is placed in the Windows/Startup folder during install that will ensure the tiny program that controls the LEDs is loaded automatically when the Kaiser is soft reset or turned off and back on.
Uninstalling
Use Remove Programs to uninstall. After uninstall a soft reset is necessary to get the LEDs flashing as per the original HTC settings.
Other Information
Once this program is installed the LED will not light steady during a charge. This functionality will of course be restored after uninstalling.
Wi-Fi isn't indicated with this program as the device needs to be on to have Wi-Fi enabled anyway so you can see the connectoin status on the display.
Scheduling Mobile Phone to Turn On
(Update: On Windows Mobile 6.1 ROMs with Radio version 1.64.08.21 this is no longer an issue) If you set a schedule and select to turn the mobile phone on at the end of the scheduled period, please note the Kaiser will come fully on before timing out and going back to standby. This behaviour I can not change and is triggered by the radio chip. Please be careful if using this as option as when the phone turns on it could be subject to accidental button presses, and of course I can not be responsible for any charges you may incur if the phone accidently dials out.
alert/vibrate reminders
The alert/vibrate reminder is silenced as soon as you read one or more unread items. You do not need to read all unread items to silence the alert/vibrate reminder. The idea of the reminder is to get you back to look at your phone for new items that have arrived but you have missed, once you read a single item the reminders are cancelled as it has done it's job of getting your attention. Should any new items arrive afterwards, the alerts will start again.
Sound files
You may select any wav file for the alert sound. Only wav files that are in the Windows folder are supported. You may of course add a wav to the Windows folder to use your own sound.
Any problems let me know in the support forum. Enjoy.
Click to expand...
Click to collapse
I've had it forever, and I'm using 2.02.
I was hoping this was a new version, KN doesn't work 100% with WM 6.1.
khaytsus said:
I've had it forever, and I'm using 2.02.
I was hoping this was a new version, KN doesn't work 100% with WM 6.1.
Click to expand...
Click to collapse
Hmmm... I couldn't find it on the forum and therefore posted it (knowing it was dated march 2008). I've used the 1.0 version up to now, did you try it with that version because I have no issues with it on any ROM I tried (and I try them all, almost ROM update weekly).
Regards,
Nika.
This version is there from 3.5.2008. I am still waiting that he will resolve some issues about the led flashing.
nikagl said:
Hmmm... I couldn't find it on the forum and therefore posted it (knowing it was dated march 2008). I've used the 1.0 version up to now, did you try it with that version because I have no issues with it on any ROM I tried (and I try them all, almost ROM update weekly).
Regards,
Nika.
Click to expand...
Click to collapse
No, I'll try to find the older version. This one basically works, but I think I *only* get one LED notification after that.. It's very odd.. if I have SMS set to Blue and Email set to Green, and I get an email first, I'll get a green blink. After that I'll only get a green blink. After a soft reset, if I get an SMS first, I'll get blue blinks after..
Never any left blinks, such as missed call etc..
But at least it doesn't blink forever like nueLED did, and it'll uninstall without leaving junk all over. Also it doesn't blink incessantly and still works with TomTom, so I continue to use it... but I'll try v1.0
@ Mikulec
Which blinking issue do you mean exactly?
When your Leds wont stop blinking after receiving a new SMS/MMS just try these.
Go into your registry:
HKEY_CURRENT_USER/System/State/Messages
There are Folders named SMS and MMS, in these Folder is another Folder called unread.
There is a key called Count, set it to zero in both folders and the leds will stop endless blinking.
Cheers
Damn,
I read your post 2 or 3 days ago, thought I'll give a try cause I was searching for such an app (switching off sounds for specific time periods, i.e. in the morning to use SpoonAlarm, which uses a "notification" before activating, sort of iritating when still sleepy ).
Then I forgot and needed 30 minutes of intensive forum search to put my hands on it . I try it now, thanks for the tip.
EDIT: damn the led system isn't handling amber at all, not even when the phone is charging, that's lame :-/. And you can't do w/o it seems. I wanted this "scheduled switch off notification" .
i will keep my post short
"KaiserNotifications is must to have in Kaiser"
I have a Tilt and I don't know if my phone is the problem or what? but I cannot select "blue" for Bluetooth or "red" for unread SMS. I know there's an issue with the amber light, but my phone is only blinking green and nothing else, no matter what changes do I make. Is this software 100% compatible with the AT&T Tilt?
Thank you, brother. it is useful
TU...
But after 1 month using I instal nueLED and for me it's the best software..
i can't see amber color any more
I Installed KaiserNotification v2.02 but i can't see the amber color any more, i can see it only when it charges and before entering windows.
Is there any solution in registry?
Thx in advanded
nice prog nikagl! Great Work!
sdlopez83 said:
nice prog nikagl! Great Work!
Click to expand...
Click to collapse
It's not mine, it's created by a Modaco user:
http://www.modaco.com/user/262569/phil-uk/
Regards,
Nika.
Folks,
New to the world of smartphones, have had a Touch Diamond 2 for the last year that I purchased from a coworker and has been working flawlessly for the past year and a half. However recently a very annoying problem has started. I am not able to get audio or vibrate notifications whenever I have any new SMS. The LED on the top of the phone though still blinks.
The second problem I have is that whenever the phone is rebooted, the voicemail indicator is always ON though there are no voicemails.
I can live with this one but the first one has driven me up a wall.
I have already checked up the settings and all of them look ok.
The phone is running Windows Mobile 6.5 though has been flashed with the Nataly ROM. I am not sure which version it is, on rebooting the phone this shows up as the phone starts up
R 4.49.25.17
G 61.44tc.25.32u
D 4.5.Nataly
Any thoughts on what could be happening and what I can do to resolve this issue?
I wonder - is it possible to change the frequency of blinking of the notification LED diode? It blinks too slow and one has to stare at the phone to be sure there are no missed calls or new messages without waking the device.
I went through the settings several times but could not find anything. In the registry I stumbled upon HKLM\Drivers\BuiltIn\AllLEDMgr (as I understand AllLEDMgr is the LED driver), but there was no value that seemed to be related to frequency of blinking. Maybe I missed something in the registry?
Anyway, I'd like to avoid applications such as nueLED, because that would be another thing running all the time (TD2 is not the snappiest phone even if one does not use HTC Sense - personally I prefer the less is more approach and therefore install only applications that I really need).
Any hints/tips would be most welcome.
nvx