Related
I am currently at at Serendipity VII and i would like to go to SuperNova4.2.
Can i flash the supernova4.2 Rom from CWM? Sueprnova4.2 is pretty much Firefly which is at 2.2 so i wouldn't have to load the old bootloaders since SerendipityVII is at Gengerbread 2.3 i would just be able to flash straight from CWM correct? I should be ok going from my current Gengerbread 2.3 to any 2.2 without going back to stock correct? Before changing ROMS should i do a wiping the cache partition and dalvik cache? whipe data/factory reset?
flash a froyo kernel with odin first. once thats done it'll bootloop so just yank the battery, boot into recovery wipey wipe, flash supernova...
Might be a dumb question but how can i tell a certain Kernel is a foyo?
in the dev section...the thread title for the kernels will say 2.2 or froyo.
I did a search under Dev for "Froyo" all came back with [ROM] the only one that came back with froyo was http://forum.xda-developers.com/showthread.php?t=818377&highlight=froyo
yeah there is no .tar in there...
get the .tar here http://forum.xda-developers.com/showthread.php?t=893880
one from here http://forum.xda-developers.com/showthread.php?t=930679
sorry forgot the kernels might not have been named froyo since thats all there really was before gb. no need to distinguish...
Before changing ROMS should i do a wiping the cache partition and dalvik cache? whipe data/factory reset?
Thanks for your help.
yup
flash the kernel... then, boot into recovery (cause it'll just loop if you try and go all the way to the OS.) do the data and cache wipes then flash the rom.
Sorry i missed it. Thanks for your help everything went well!
Hey guys, so I had MIUI since it came out and kept updating it every friday like I'm sure everyone else does that has it, but today I wanted to try out a Gingerbread ROM other than MIUI or CM7 so I went and tried to install Mosaic IV. I followed the tutorial on MobileTechVideos for installing it and when I got to the part where I had to install the zip from the sd card I did it and it got stuck at formatting partitions. So I waited a while, about ten minutes, then took out the battery and tried starting over from stock again. Then I realized that I was supposed to use a different kernel for Mosaic IV then the one Josh used in the video. So I downloaded that kernel and used that one instead of the one he used in the tutorial. And I couldn't get into recovery mode with it. So I flashed to stock again and redid the whole thing, this time I got into recovery and flashed it but it still got stuck at formatting partitions. So at this point I was like crap I have to get a different ROM. So I tried flashing Serendipity and that wouldn't install either. Then I tried MIUI again to at least get back to what I had earlier today, and I got an error while flashing the captivate-efsbackup zip in recovery. I have no idea what to do, all I want is to just get off of the stock firmware which im stuck with for now since I have to go to work in a little bit. If anyone can help it would be greatly appreciated. Thanks in advance
I had a similar problem, and the ultimate fix for me was this:
Flash back to eclair stock (which you did)
Master Clear (aka format internal sd - make sure to back up your stuff first!)
Install CWM (may have to go manually - renaming to update.zip and reinstalling packages)
Wipe dalvik cache and cache partition, as well as user data
Install a stable Froyo ROM (take your pick, preferably a full-wipe with no bootloaders)
Reboot to CWM and do a second dalvik/cache/user data cleaning
(If you're going GB)
reboot to download mode
flash stock GB (WATCH OUT FOR BOOTLOADERS!)
boot it up, let it settle, reboot to CWM
flash your GB rom.
(If not)
Go where you would go from a stable Froyo Rom.
That's how I got back from a messed up phone with GB bootloaders to a working Mosaic installation. I can't say it will definitely work for you, but it may give you some ideas.
+1 get clockwork recovery...you need to make sure the rom you are flashing is compatible with the version of CWR you are using.
For example a rom that needs to be installed with CWR3 you will need to install the zip presumably from CWR2. Pull the battery and reboot back to recovery - you should now be in the updated version of CWR. Then for safety sake - re install your zip.
Reboot and you should be all set.
I had lots of trouble going from 2.2 to 2.3. Flashing between 2.3 roms is very easy comparatively
milkytron said:
Hey guys, so I had MIUI since it came out and kept updating it every friday like I'm sure everyone else does that has it, but today I wanted to try out a Gingerbread ROM other than MIUI or CM7 so I went and tried to install Mosaic IV. I followed the tutorial on MobileTechVideos for installing it and when I got to the part where I had to install the zip from the sd card I did it and it got stuck at formatting partitions. So I waited a while, about ten minutes, then took out the battery and tried starting over from stock again. Then I realized that I was supposed to use a different kernel for Mosaic IV then the one Josh used in the video. So I downloaded that kernel and used that one instead of the one he used in the tutorial. And I couldn't get into recovery mode with it. So I flashed to stock again and redid the whole thing, this time I got into recovery and flashed it but it still got stuck at formatting partitions. So at this point I was like crap I have to get a different ROM. So I tried flashing Serendipity and that wouldn't install either. Then I tried MIUI again to at least get back to what I had earlier today, and I got an error while flashing the captivate-efsbackup zip in recovery. I have no idea what to do, all I want is to just get off of the stock firmware which im stuck with for now since I have to go to work in a little bit. If anyone can help it would be greatly appreciated. Thanks in advance
Click to expand...
Click to collapse
so your saying that you went to a gingerbread rom straight from MIUI? if that's true it failed because you didn't have the gingerbread bootloaders before you installed the rom
Sent from my Captivate
pwnerman said:
so your saying that you went to a gingerbread rom straight from MIUI? if that's true it failed because you didn't have the gingerbread bootloaders before you installed the rom
Sent from my Captivate
Click to expand...
Click to collapse
I did have the bootloaders, I went back to stock before I did anything just to be safe. I'm gonna try what the other guys said though right now, wish me luck haha
jmtheiss said:
I had a similar problem, and the ultimate fix for me was this:
Flash back to eclair stock (which you did)
Master Clear (aka format internal sd - make sure to back up your stuff first!)
Install CWM (may have to go manually - renaming to update.zip and reinstalling packages)
Wipe dalvik cache and cache partition, as well as user data
Install a stable Froyo ROM (take your pick, preferably a full-wipe with no bootloaders)
Reboot to CWM and do a second dalvik/cache/user data cleaning
(If you're going GB)
reboot to download mode
flash stock GB (WATCH OUT FOR BOOTLOADERS!)
boot it up, let it settle, reboot to CWM
flash your GB rom.
(If not)
Go where you would go from a stable Froyo Rom.
That's how I got back from a messed up phone with GB bootloaders to a working Mosaic installation. I can't say it will definitely work for you, but it may give you some ideas.
Click to expand...
Click to collapse
Alright so I have Andromeda 2.1 which is a froyo rom. Which method should I use to get to stock GB?
use Odin to flash gingerbread bootloaders then flash gingerbread roms
howtomen said:
use Odin to flash gingerbread bootloaders then flash gingerbread roms
Click to expand...
Click to collapse
I flashed the gingerbread stock rom and have it rooted with xcal's kernel, but when i flashed mosaic IV it got stuck at formatting partitions and i pulled the battery after about 15 minutes and then restarted my phone to find it stuck in a bootloop. So i had to start from stock again and now im back to gingerbread stock with root. I'm kinda scared to try again because it takes me like 30 minutes to get back to gingerbread stock with root. I think ill just stick with stock for a little bit
I tried to install the illuminance Rom last night, and it kept getting stuck at the ATT logo. I reflashed back to stock did a master clear, flashed a stock 2.3.5 uckj3 gingerbread Rom with corn kernel v307 also ATT gingerbread boot loaders. I used CWM to install the ROM, it'll restart then get stuck and get stuck at the ATT logo....is there something I'm missing? I've installed other ROM and have had no issues until now?!?!
If you used Corn kernel, are you sure you where on RFS format and not ex4?
it was rfs format before I tried to install
Did you make the file (don't remember exactly wich) that disable Voodoo. There is no reason for it to bootloop. After you flashed stock did you let it boot up? Maybe try with Boog kernel to flash then flash wich ever kernel you want to use?
I'll try the boog kernel.....I also ensured that the lagfix for system and data was disabled through CWM recovery ....in the install instructions it stated that it would take awhile to boot, I let it set for two hours. One thing I noticed is that 150 jpegs were installed
Sent from my SAMSUNG-SGH-I897 using xda premium
Doubt this might be it but, If you set it on CWM to disable lag fix reboot in cwm then flash. Random thought.
LOL....did that also.
Sent from my SAMSUNG-SGH-I897 using xda premium
Guess I'll start over clean again....
SGH-I897 Cappy
I897UCKJ3 2.3.5 Gingerbread
Corn kernel UCKJ3 V307
FASTY III V1 KJ3
Tegrak OC Ultimate
lilbigdude1 said:
Guess I'll start over clean again....
SGH-I897 Cappy
I897UCKJ3 2.3.5 Gingerbread
Corn kernel UCKJ3 V307
FASTY III V1 KJ3
Tegrak OC Ultimate
Click to expand...
Click to collapse
My boot getting stuck got fixed after Wipe data/factory reset in CWm, wipe cache, wipe Dalvik cache, - all three -then install illuminance. Tried that ? Starting from stock KJ3 no bootloaders.
Importantly: Can you boot with just Illuminance boog kernel (the one that comes wiht the ROM, no other kernel flashed)? I presume you cannot boot a fresh Illuminance install............if this is the case wiping as above should help.
I finally got illuminance to install, and is working great.
this may seem like over kill but everytime I flash a new ROM I start from scratch and flash to stock and master clear and then build from therethis is the first time that I ever had any issues by doing it this way. usually I have it setup up in 10 to 15 minutes it seems to save any issues later down the road as far as being buggy.
Glad to hear it
Hi, I tried to install Illuminance 1.1, but I think the file is corrupted. I downloaded it twice, from different locations, and its the same zip file.
I tried to decompress it before installing it, just to check file consistency, but lots of files can´t be decompressed.
Anyone had this problem? If not, any way /any where to safely download it?
Thanks!
In the Illuminance Rom Thread, in the OP, there is a link to IlluminatedOne's website, where u can find a good non-corrupted download and u will also find the installation instructions.
Not sure why u think u had a corrupted download ?? But u should b good to go once u get to the website.
As of this version 1.1 release, u should only be downloading the Illuminance Rom from said website.
Sent from i897uckj3
I downloaded my version from Mega-upload. I tried it again last night just for...you know....and received the same results of being stuck on the att logo for hours. as usual i flashed to stock and master cleared, GB boot loaders, reinstalled stock 2.3.5 and reinstalled luminance and before i rebooted i installed the samurai kernel, then rebooted and everything worked as normal....so being fairly new to the whole Dev scene i don't know why that would make a difference, but it works fine and it didn't get stuck on the att logo.
oh and thanks twin I'll try and go to the website and check it out
I want to Flash Team ICSSGS [Android 4.0.3] (Link to ROM Thread) but I am not for sure what Bootloaders or Kernel I need to use.
I currently have:
Firmware Version: 2.2
Baseband Version: I897UCKB1
Kernel Version: 2.6.32.9
Build Number: FROYO.UCKB1
In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.
WindRunnerXC said:
In general, the Gingerbread bootloaders are preferred with any of the ICS ROMs, because they are more ubiquitous and can be used with virtually any version 2.1 thru 4.0. Kernel-wise, the ICS ROMs come with a kernel, and your only other option is Glitch v14 beta right now...but mostly, you shouldn't need to worry about flashing anything beyond what's in the ROM itself right now.
Click to expand...
Click to collapse
So that ROM I listed in my OP comes with its own Kernel?
And is there a particular Bootloader I should use?
If there is, may you please link me to it?
Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader
capocaccia said:
Hey im currently running the ROM you are asking about. To answer your questions you have to be on the gingerbread bootloaders. You can flash those using odin, or since there is an official update out, use Kies mini to update your phone to gingerbread and that will flash the bootloaders for you.
About the kernel, the ROM you posted includes a kernel in the .zip and when you install the .zip it will flash the kernel for you. Its a fine kernel and works great so dont worry about changing it unless you have problems.
Here is the link on how to flash the bootloaders using Odin. Its not a hard process and pretty safe so let us know how you come out on the other side!
http://forum.xda-developers.com/showthread.php?t=1129821&highlight=gingerbread+bootloader
Click to expand...
Click to collapse
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?
froyo will still boot. GB BL are backwards compatible and the ISCSGS script should allow it to flash over any ROM
Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance
mrnapolean1 said:
Now when I flash this bootloader you listed, will Froyo still boot or will I have to flash my ROM afterwards?
Click to expand...
Click to collapse
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
gugman said:
Hi all.
as i can't post yet in a thread mentioned by mrnapolean1 (http://forum.xda-developers.com/showthread.php?t=1362092) I'll try to ask my question here, as it related to a question asked by this thread starter
so i have gingerbread 2.3.5, installed CornKernel_UCKK4_v603 and custom rom SimplyStock KK4 V1.0 , so if i wanted to switch Team ICSSGS [Android 4.0.3] should i do following?
1. wipe data /factory reset
2.wipe system
3.flash from recovery mode Android 4.0.3 zip?
I already have a backup made with Efs Pro as a tar file
anything else i need to do?
thank you so much in advance
Click to expand...
Click to collapse
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach
capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?
gugman said:
capocaccia
thank you !
one more question, i understood about data/factory/cash, but dont i need to format system before flashing new rom? i thought its always better to do before new rom flashing?
Click to expand...
Click to collapse
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.
capocaccia said:
I think this was true when flashing older roms. When I flashed that ROM I did not format system and it worked fine. Let me know if you have any problems when you flash.
Click to expand...
Click to collapse
i see. okey, thanx a lot again. will be able to flash in about an hour and will let you know
after flashing all went good and phone booted with no problem, except that i don't have a wi-fi, it is connected after typing my password in, wifi icon is on home screen, but could not enter any website or connect to my google account. any ideas?
Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS
capocaccia said:
Try flashing this: http://code.google.com/p/ice-cream-.../detail?name=WifiFix.zip&can=2&q=#makechanges
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
so after flashing that file my phone gives me screen like this
Power Reset or Uknown Upload Mode
and it is stucked. so may i pull the battery off and go to recovery mode again and go back to my previous room? should i perform system format in this case?
Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS
capocaccia said:
Try to reboot. If it won't reboot then ask around in the icssgs Q and A thread.
Sent from my Captivate running Android 4.0.3 ICS
Click to expand...
Click to collapse
with keys+power button combination i've been able to exit that screen and reinstalled 4.0.3
do you know safe way how do i go back to SimplyStock KK4 V1.0? should i first flash CornKernel_UCKK4_v603 with odin? but is it safe to do over android 4.0.3?
sorry for bothering you, but i am kind of stucked
---------- Post added at 02:52 AM ---------- Previous post was at 02:33 AM ----------
ok, in the end managed to boot the phone with working wifi but still would like to know how to flash back to SimplyStock KK4 V1.0, just in case ;-) if that won't be problem for you. thank you !!!
IMHO the best way to go from gingerbread to ics 4.0 is to
- in the development section download stock kk4 without bootloaders, unless you dont have them http://forum.xda-developers.com/showthread.php?t=1300843
- then download a kernel of your choice probably cornkernal and put it on your internal sd card
- download ICS latest build and gapps and put them on your internal sd
- oneclick odin the stock kk4, let it boot up completely
- power off and install kernal via odin without aut reset
- boot into recovery, factory/data reset, clean cache, clear dalvik, install latest ics, then install gapps right after,
- reboot system and youre done.
IF you want to go back to your other rom the simplest way is to just kk4 fresh install, install kernal via odin, then isntall your rom.
I always keep all my contacts synced with gmail, and titanium backup any game data or app data i need, and reinstall apps through the market.
hope this helps
capocaccia said:
Yes, Froyo will still boot. If this were a layer cake it would go something like bootloader, kernel, rom. So basically, your bootloader has nothing to do with your kernel or your rom but it is at the bottom layer of the boot process. It does effect which ROMs you can use though as gingerbread and ICS roms require GB bootloaders. So flash the bootloaders, you will still be on Froyo. Update to GB. Root GB. Place the ROM on your internal SD and then flash it. If you run into any problems check the common problems page found on the first page of the SGSICS ROM.
First, if you want to keep any of your apps or contacts backup those as well using Titanium Backup. Make sure to backup to the External SD card or make a copy of the backup somewhere other than the phones internal SD.
Second, you dont have to wipe data/factory reset before you flash. This is only if you have the problem of a bootloop when you try to install. I had this problem and when I did the wipe data afterward it fixed it immediately. So follow this:
1: Boot into CWM
2: install rom
IF you have an issue with a boot loop at this point
1: Get back into CWM using the button combination
2: Wipe data/Factory Rest and Wipe Cach
Click to expand...
Click to collapse
Now can I go strait from Froyo to the ROM i listed in my OP?
okey, so at the end i decided to switch Doc's Master ICS and so far so good thank you all again for your support !!!!
mrnapolean1 said:
Now can I go strait from Froyo to the ROM i listed in my OP?
Click to expand...
Click to collapse
I gone ahead and flashed ICS onto my phone. It is working good but the Hang up button does not work. In order to hang up, i have to lock it and unlock it.
Now i did a Backup of Froyo from within CWM. if I do have a problem, can i go to DWM and restore the backed up Froyo?
Hi,
I as of yet, am not going close to any ICS build till the issue gets solved by someone.
so I am experimenting with different gb roms. i was using checkrom v6 but didnt like it, so followed steps to install darkyrom/alliancerom extreme edition. i followed the steps as I was told to install allianceota and flash the rom through there. it didnt work. so instead using cmw i flashed through recovery, it did flash but there no root.
so now, i reflashed a stock la6 rooted rom from here; http://forum.xda-developers.com/showthread.php?t=1535025
this went smoothly with no problems, so i installed allianceota as normal, this time when i try to flash the following messages come up:
Installing Multi-CSC
Can't access to '/system/CSC/KOR/system/'
Successfully applied multi CSC"
and then it gives me the option to reboot, wipe cache and a few other options, not full recovery mode.
shall i just reflash the rom through recovery, or am I doing something wrong? and does the slight error above mean I have a problem with my note?
cheers in advance.
Let me just say that almost every ICS ROM out there now has disabled the MMC_CAP_ERASE code in the kernel that activates the eMMc bug and bricks your phone. If you want stock ICS, you can use SpeedMod or Franco kernels. If you want AOKP, there is that now. If you want CM9, there's a bunch of variations plus the official CM9 nightly. If you read through the OP and stickies, you will be okay.
Are you on stock recovery still? It sounds like it from the error you are getting. Try flashing CWM recovery and installing the GB rom with that. Follow Drketan's thread in Android Development.
hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.
salespalace said:
hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.
Click to expand...
Click to collapse
I love ICS a lot more than GB. If you want to use stock ICS, I would just use Franco or Speedmod kernels with it and be safe. Read both of their forums and decide what you want to do.
I had the same problem with rom deodex i had flash with odin 1.85 firmware gingerbread here ; http://www.hotfile.com/dl/152168378/f76281c/N7000XXLC1_N7000OXXLB3_ATO.zip.html... then i made wipe cache and cache dalvick .
I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.
salespalace said:
I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.
Click to expand...
Click to collapse
-Flash a stock GB rom with pc odin
-Root it
-Go to cwm and wipe all (factory reset,cache and dalvik and then Install the ics rom that you like
-Reboot system and now it should work
Sent from my GT-N7000 using Tapatalk 2