Database Develop

[GUIDE] Build CM10 kernel from source + wkpark's RAM hack

For any CM10 ROM, except new bootloader one, hackfest, and CM10.1
This tutorial shows you how to build CM10 kernel from RC and the CM team's source(it is their work), and using wkpark's ramhack patch or other patches
If you are uncomfortable in building the kernel, you use my flashable sample kernel at the end of the post, which uses 56 MB RAM hack.
Pre-requistes:
A Linux system
An internet connectionc
Some time and patience
But the time required for downloading resources, and building once everything is set up, is only a fraction of the time required for a full CM10 ROM
You can follow this guide, with or without having built CM10 following Raum1807's excellent CM10 building guide. At one of the places, the difference occurs whether you had built CM10 before or not, and I have listed it at that place
For a first time build, you need to follow all the steps, but 2nd time onwards, you can skip to the build step or RAM hack setting step
Instructions:
STEP 1: SETTING UP THE ENVIRONMENT
Install any CM10 ROM on the device (old bootloader, non-hackfest, non-CM10.1 one)
If you already have CM10 environment set up, skip to "Create an environment variable..." part
Install development support packages:
Debian based Linux distributions (like Ubuntu)
64bit systems:
Code:
sudo apt-get install git-core gnupg flex bison gperf build-essential \
zip curl libc6-dev libncurses5-dev:i386 x11proto-core-dev \
libx11-dev:i386 libreadline6-dev:i386 libgl1-mesa-glx:i386 \
libgl1-mesa-dev g++-multilib mingw32 openjdk-6-jdk tofrodos \
python-markdown libxml2-utils schedtool pngcrush xsltproc zlib1g-dev:i386
then
Code:
sudo ln -s /usr/lib/i386-linux-gnu/mesa/libGL.so.1 /usr/lib/i386-linux-gnu/libGL.so
Red Hat based Linux distributions
32bit and 64bit systems:
git gnupg java-1.6.0-openjdk-devel flex bison gperf SDL-devel esound-devel wxGTK-devel zip curl ncurses-devel zlib-devel gcc-c++ glibc-devel
64bit only:
glibc-devel.i686 libstdc++.i686 zlib-devel.i686 ncurses-devel.i686
Setting up Java (thanks to Raum for the java setup guide)
You need a Java Development Kit for building CM10. Recommended is the SUN JDK 6. As of writing the most recent version is SUN JDK 6 Update 37.
1. Download the jdk-6u37-linux-i586.bin from the Oracle/Sun Java Download Area. If you are on 64-bit Ubuntu as I am, you should grab jdk-6u37-linux-x64.bin.
2. Make the bin file executable:
Code:
$ chmod +x jdk-6u37-linux-x64.bin
3. Extract the bin file:
Code:
$ ./jdk-6u37-linux-x64.bin
4. Move the extracted folder to this this location:
Code:
$ sudo mv jdk1.6.0_37 /usr/lib/jvm/./jdk-6u37-linux-x64.bin
5. Install the new Java source in system:
Code:
$ sudo update-alternatives --install /usr/bin/javac javac /usr/lib/jvm/jdk-6u37-linux-x64.bin/bin/javac 1
$ sudo update-alternatives --install /usr/bin/java java /usr/lib/jvm/jdk-6u37-linux-x64.bin/bin/java 1
$ sudo update-alternatives --install /usr/bin/javaws javaws /usr/lib/jvm/jdk-6u37-linux-x64.bin/bin/javaws 1
$ sudo update-alternatives --install /usr/bin/javadoc javadoc /usr/lib/jvm/jdk-6u37-linux-x64.bin/bin/javadoc 1
$ sudo update-alternatives --install /usr/bin/javah javah /usr/lib/jvm/jdk-6u37-linux-x64.bin/bin/javah 1
$ sudo update-alternatives --install /usr/bin/javap javap /usr/lib/jvm/jdk-6u37-linux-x64.bin/bin/javap 1
$ sudo update-alternatives --install /usr/bin/jar jar /usr/lib/jvm/jdk-6u37-linux-x64.bin/bin/jar 1
6. Select the default Java version for your system:
Code:
$ sudo update-alternatives --config javac
$ sudo update-alternatives --config java
$ sudo update-alternatives --config javaws
$ sudo update-alternatives --config javadoc
$ sudo update-alternatives --config javah
$ sudo update-alternatives --config javap
$ sudo update-alternatives --config jar
7. Check Java version:
Code:
$ java -version
8. Verify the symlinks. Javac, Java, Javaws, Javadoc, Javah, Javap and Jar should all point to the new Java location and version:
Code:
$ ls -la /etc/alternatives/java* && ls -la /etc/alternatives/jar
Now,
If you have CM10 source fetched already (if you have built cm10)
If the directory name where the cm10 source exists is "cm10" (as in Raum's building guide)
Create an environment variable denoting the location of the android toolchain as follows:
Code:
export CCOMPILER=${HOME}/cm10/prebuilt/linux-x86/toolchain/arm-eabi-4.4.3/bin/arm-eabi-
Or else, replace the path/name if yours is different
(If your arm-eabi version is not 4.4.3, check the folder name and change it accordingly)
If you do not have cm10 source on your pc, then you need to download the ARM EABI Toolchain separately
Download link, ready to extract
If above does not work, download from official site here
Download and extract then, create an environment variable denoting the location of the toolchain as follows:
Code:
export CCOMPILER=[extraction directory]/bin/arm-eabi-
Download Kernel Source Code:
Code:
mkdir -p ~/kernel
cd ~/kernel
Now download RC's CM10 kernel source
In terminal, do
Old bootloader:
Code:
git clone git://github.com/CyanogenMod/lge-kernel-star.git -b jellybean
New bootloader:
Here, pengus77 has made the necessary changes in his repo, so we fetch from that
Code:
git clone git://github.com/pengus77/lge-kernel-star.git
Thus, there should be a folder named "lge-kernel-star" inside /kernel folder
Then in terminal, cd to that directory "lge-kernel-star"
Code:
cd lge-kernel-star
Getting the config file
The next step is to copy the file "/kernel/lge-kernel-star/arch/arm/configs/cyanogenmod_p990_defconfig" to "/kernel/lge-kernel-star and rename it to ".config"
using the command:
Code:
cp arch/arm/configs/cyanogenmod_p990_defconfig .config
(Thanks to tonyp for the tip!)
STEP 2: CONFIGURATION
Configure the build:
Code:
make ARCH=arm CROSS_COMPILE=$CCOMPILER oldconfig
If it happens to ask anything, just accept the defaults at every step by pressing enter.
STEP 3: APPLYING PATCHES
Applying patches like wkpark's RAM hack patch
If you skip this step, the kernel will work, but you'll have a completely stock kernel without RAM hack or other tweaks
Download wkpark's two patches from here and here, and put them in your /kernel directory
Code:
cd ~/kernel
Now to apply the patches, we use the patch command like this:
Code:
patch -Np1 -d lge-kernel-star < patchname.patch
(replace patchname with name of the patch file)
Here, -N is for ignoring patches that seem to be already applied or reversed
p<num> Strip the smallest prefix containing num(here num=1) leading slashes from each file name found in the patch file
In this case, num=1 according to the path names in wkpark's patch, and in a lot of cases, the value of 1 is common
-d is to change to the directory immediately, before doing anything else
You need to apply wkpark's two patches one by one (0001-..., then bootloader-...)
If you get errors while patching, if they are basic errors like file not found etc. then you should manage to fix it yourself.
But if you get errors like "HUNK ... failed",
try
Code:
patch -Np1 --ignore-whitespace -d lge-kernel-star < patchname.patch
A "HUNK ignored" is ok, if patch was attempted previously, since that file might have been successfully patched last time
if a HUNK still fails, then read the troubleshooting guide
Setting RAM hack size (If you skipped the above patching step, dont do this)
wkpark's patch makes it possible for you to set ramhack size in kernel command line parameter.
The cmdline parameter has to have the full boot.img command line parameters, which you can obtain from dmesg. I have done it for you, so you can save time on that
Here's how it looks for the old bootloader: (for the new one, ignore this)
Code:
<5>[70:01:01 00:00:00.000] Kernel command line: loglevel=0 muic_state=1 CRC=10203036179a93 brdrev=1.0 uniqueid=37c7006421f6097 video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 tegraboot=sdmmc tegrapart=recovery:35e00:2800:800,linux:34700:1000:800,mbr:400:200:800,system:600:2bc00:800,cache:2c200:8000:800,misc:34200:400:800,userdata:38700:c0000:800 [email protected] vmalloc=128M androidboot.mode=normal androidboot.hardware=star androidboot.serialno=37c7006421f6097
Paste the line starting from loglevel=0 till the end (serialno) into .config file in lge-kernel-star folder in
CONFIG_CMDLINE="<here>"
Insert a carveout size in between vmalloc and androidboot.mode
Determing carveout size: carveout=<152 - RAM hack size>M
For example, if RAM hack size is 56, then carveout is 96M
So in that case, the cmdline is like this:
old bootloader:
Code:
CONFIG_CMDLINE="loglevel=0 muic_state=1 CRC=10203036179a93 brdrev=1.0 uniqueid=37c7006421f6097 video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 tegraboot=sdmmc tegrapart=recovery:35e00:2800:800,linux:34700:1000:800,mbr:400:200:800,system:600:2bc00:800,cache:2c200:8000:800,misc:34200:400:800,userdata:38700:c0000:800 [email protected] vmalloc=128M carveout=96M androidboot.mode=normal androidboot.hardware=star androidboot.serialno=37c7006421f6097"
new bootloader:
Code:
CONFIG_CMDLINE="tegraid=20.1.4.0.0 [email protected] carveout=152M android.commchip=0 vmalloc=128M androidboot.serialno=037c7006421f6097 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,-3 androidboot.mode=normal usbcore.old_scheme_first=1 [email protected] [email protected] muic_state=0 tegraboot=sdmmc tegrapart=recovery:35e00:2800:800,boot:34700:1000:800,mbr:400:200:800,persist:600:2bc00:800,cache:2c200:7f00:800,misc:34200:400:800,userdata:38700:c0000:800,bcttable:0:600:800,bootloader:100:300:800,data/ve:f8800:1400:800,system:34c000:40000:800 "
and save the file
Dont set carveout too low, or else some gpu-intensive stuff may not work properly.
STEP 4: BUILDING THE KERNEL
In terminal,
Code:
cd ~/kernel/lge-kernel-star
Code:
make ARCH=arm CROSS_COMPILE=$CCOMPILER -j`grep 'processor' /proc/cpuinfo | wc -l`
This step may take a while, depending on your computer. Took ~5-10 mins for the first build for me, and ~1 min for the second build onwards.
If it asks in the terminal "use default config?" then say "y", if not, then ignore this
If you get some error and the building aborts within a few seconds, try the "Create environment variable part" again, and then return back directly to the build step.
After it is done, you should have a kernel stored in ~/kernel/lge-kernel-star/arch/arm/boot/zImage
Preparing the flashable zip for the kernel
Some compiled modules need to be included so that problems like wifi not switching on dont occur.
They are:
drivers/misc/bthid/bthid.ko
drivers/scsi/scsi_wait_scan.ko
drivers/net/wireless/bcm4329/wireless.ko
They will be used while preparing the flashable zip below.
Thanks to feav's compiled modules and benee's anykernel updater for star, all this is ready-made and you can simply:
Download the sample kernel zip attached below and replace /kernel/zImage and and the above modules in system/lib/modules/hw in that with yours, edit updater-script if you want.
Your flashable zip is now ready
STEP 5: FLASHING AND TESTING THE KERNEL
Put the sample kernel below as a backup in case your kernel does not boot and you need a working phone immediately.
Flash the kernel in recovery, wipe cache, dalvik cache and reboot.
If the phone goes past the LG logo screen(s) and into the bootscreen of the ROM, then it should work
Then you can check "kernel version" in settings->about phone to see your kernel information,
and you can see the new RAM size (which should be 342 MB + RAM hack size) in some app like battery dr saver, or antutu benchmark's system info.
If it doesnt work, make sure you have followed the entire guide properly and then ask queries
If you want to revert to another kernel, flash that kernel in recovery, or for stock kernel, flash your ROM.
Keeping kernel source up to date (for building again later after RC has made changes to the source):
Code:
cd ~/kernel/lge-kernel-star
git pull
This will update your source with the latest commits by RC. Then you can rebuild the kernel by doing the "create environment variable" and then skip directly to the build stage
Standard disclaimer:
I am not responsible if anything goes wrong with your phone or anything else.
Credits:
aremcee/RC and the rest of the CM team for all their work. This is their kernel you are building
wkpark for his valuable contributions, including the ramhack patches and cracking the new bootloader
benee for his Anykernel updater for star, and other tweaks
feav for his compiled wifi modules
pengus77 for the work to make it suitable for the new bootloader
Download links for sample kernels:
SAMPLE 56 MB RAMHACK KERNEL
SAMPLE 32 MB RAMHACK KERNEL
SAMPLE 24 MB RAMHACK KERNEL

Troubleshooting guide:
1. Patch failure
HUNK failed means that a particular file was not patched to some problem. In this case, a .rej file is saved in the same folder as the file to be patched, and it contains the stuff not patched.
Do not neglect "failed" hunk since it means a partially applied patch(some files patched, some files not), and may cause problems. "Ignored hunk" is ok, if the patch had been attempted before on a file and had succeeded on that file last time.
To manually patch the failed hunk, go that file where the hunk failed (has same name as .rej file without .rej extension)
For example, if .rej file is board-star.c.rej, and it contains the following sample lines (look for lines beginning with '+' and remove the + before adding, similar for -) go to board-star.c, and add the lines manually like this:
Code:
#if defined (CONFIG_STAR_REBOOT_MONITOR) || defined (CONFIG_BSSQ_REBOOT_MONITOR)
#define RAM_RESERVED_SIZE 100*1024
/* Force the reserved_buffer to be at its old (Froyo/GB) location
for reboot to work with the older bootloader */
if (strstr(saved_command_line, "brdrev=")) {
extern void *reserved_buffer;
pr_info("The older bootloader detected\n");
if (memblock_end_of_DRAM() > 0x17f80000) {
if (memblock_reserve(0x17f80000, RAM_RESERVED_SIZE)) {
pr_err("Fail to get reserved_buffer for the older bootloader\n");
} else {
pr_info("Change reserved_buffer for the older bootloader\n");
reserved_buffer = phys_to_virt(0x17f80000);
}
} else {
pr_info("Change reserved_buffer\n");
reserved_buffer = ioremap(0x17f80000, RAM_RESERVED_SIZE);
}
}
#endif
This was in the .rej file, and is to be added immediately after
Code:
#if defined(CONFIG_LGE_BROADCAST_TDMB)
star_dmb_init();
#endif /* CONFIG_LGE_BROADCAST */
in board-star.c (and before the next #if defined or closing bracket)
Similarly, the - lines to be deleted and + lines are to be added in that failed hunk file
(do this manual stuff only if hunk fails)
2. If ramhack kernel fails, but normal kernel works:
From your pc, in terminal do
adb shell dmesg > dmesg.txt
or from your phone, in android terminal emulator, do
dmesg > /sdcard/dmesg.txt
Copy it from your dmesg.txt starting from loglevel=0 till the end (serialno)
Look for a line in dmesg.txt which resembles this:
Code:
<5>[70:01:01 00:00:00.000] Kernel command line: loglevel=0 muic_state=1 CRC=10203036179a93 brdrev=1.0 uniqueid=37c7006421f6097 video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 tegraboot=sdmmc tegrapart=recovery:35e00:2800:800,linux:34700:1000:800,mbr:400:200:800,system:600:2bc00:800,cache:2c200:8000:800,misc:34200:400:800,userdata:38700:c0000:800 [email protected] vmalloc=128M androidboot.mode=normal androidboot.hardware=star androidboot.serialno=37c7006421f6097
Use your own phone's parameters instead of this and then set carveout size.
3. Problem with config file:
Pulling kernel config from device:
You need to retrieve a working kernel config from the device, and unzip it.
For that, connect your phone to your pc, enable USB debugging if it was disabled, and then in terminal
Code:
adb pull /proc/config.gz ~/kernel/lge-star-kernel-jellybean/config.gz
cat config.gz | gunzip > .config
Alternatively, you can pull the .config from the newest boot.img
Code:
scripts/extract-ikconfig boot.img > .config

Changes and updates:
25/12/12:
Added changes to be made for the new bootloader (in red color)
24/12/12:
Updated the guide, added some fixes and changes
22/12/12:
Slightly modified version of wkpark's 2nd patch (bootloader one) which may possibly fix one of the errors and may remove need for manually adding some lines

Last one

rugglez.....you rock mate....
I am not sure if I will really do something as I am getting old(lolz) and if I understand enough....
but thanks mate, for keeping spirits alive for this device

rugglez,
Did you see these posts: http://forum.xda-developers.com/showpost.php?p=34600723&postcount=189
http://forum.xda-developers.com/showpost.php?p=34601277&postcount=192
Did you experienced any ploblem with USB?

SREEPRAJAY said:
rugglez.....you rock mate....
I am not sure if I will really do something as I am getting old(lolz) and if I understand enough....
but thanks mate, for keeping spirits alive for this device
Click to expand...
Click to collapse
There are always some things worth experiencing once in life, like if you are an Android user, building a ROM and a kernel. You have experienced it with your wonderful AF kernel, thats important
feav said:
rugglez,
Did you see these posts: http://forum.xda-developers.com/showpost.php?p=34600723&postcount=189
http://forum.xda-developers.com/showpost.php?p=34601277&postcount=192
Did you experienced any ploblem with USB?
Click to expand...
Click to collapse
USB works fine, both adb and mass storage
This guide may seem intimidating, but trust me, once you complete it the first time, you'll find it really simple from the next build onwards.
Uploaded a slightly modified version of wkpark's 2nd patch (bootloader one) which may possibly fix one of the errors and may remove need for manually adding some lines. Updated link in OP and attached here too.

I tried the sample kernel and my camera stops functioning and so with other apps such as contacts, they don't start at all. Im on dec 20 nightly. Could it be the ramhack size? Maybe 32mb will suffice. Just saying.
Thanks to this, will probably try this next week..

aldyu said:
I tried the sample kernel and my camera stops functioning and so with other apps such as contacts, they don't start at all. Im on dec 20 nightly. Could it be the ramhack size? Maybe 32mb will suffice. Just saying.
Thanks to this, will probably try this next week..
Click to expand...
Click to collapse
Uploaded 32 MB ram hack kernel for those having problem with camera, try it out.
Download link 32MB RH
Update:
Added 24MB version too. Here you go:
24MB RH kernel

Thanks rugglez, 32 mb rh is ok so far, cm10 is way smoother and can still play nfs most wanted. Btw, can you apply the patch for double lg logo too by wkpark?
Sent from my P990-CM10

After installing the new kernel, if some apps still don't work or there any lag, disable "force gpu rendering" and "disable hardware overlays" in developer settings.

Thank you for your work! Just flashed the 32mb version without any problem. On cm7 the 48mb ramhack was the biggest without breaking 720p recording. Maybe you should give it a try!

Uhm download a kernel zip file?
How about git clone?
Sent from my Nexus 7 using xda app-developers app

tonyp said:
Uhm download a kernel zip file?
How about git clone?
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
Git clone size = ~440mb
Zip size = 120mb which extracts to that same size
Takes more time to download more for people like me with slow Internet, no other reason

Hi rugglez, got the ff. error when installing the required packages, Im on ubuntu 12.10 x64.
Note, selecting 'libsdl1.2-dev' instead of 'libsdl-dev'
Package sun-java6-jdk is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'sun-java6-jdk' has no installation candidate
E: Unable to locate package libwxgtk2.6-dev
E: Couldn't find any package by regex 'libwxgtk2.6-dev'
How to fix? Thanks.

aldyu said:
Hi rugglez, got the ff. error when installing the required packages, Im on ubuntu 12.10 x64.
Note, selecting 'libsdl1.2-dev' instead of 'libsdl-dev'
Package sun-java6-jdk is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source
E: Package 'sun-java6-jdk' has no installation candidate
E: Unable to locate package libwxgtk2.6-dev
E: Couldn't find any package by regex 'libwxgtk2.6-dev'
How to fix? Thanks.
Click to expand...
Click to collapse
Can you install the dependencies from Raum's CM10 building thread here?
Follow steps 1 and 2 there.
Let me know if that works, ive updated the guide's step 1(setting up environment)
Installing the dependencies from this guide was the only thing i didnt test, since i had the CM10 environment set up already

a step is missing from this guide.
adb pull /proc/config.gz ~/kernel/lge-star-kernel-jellybean/config.gz
cat config.gz | gunzip > .config
Click to expand...
Click to collapse
then
mv config arch/arm/configs/<your_config_name>_defconfig
make ARCH=arm CROSS_COMPILE=$CCOMPILER oldconfig
make <your_config_name>_defconfig
make ARCH=arm CROSS_COMPILE=$CCOMPILER menuconfig
Click to expand...
Click to collapse
then continue...
if you don't make the default config the compiler throws out some errors.
ps: nice guide btw

rugglez said:
Git clone size = ~1.5gb
Zip size = 440mb which extracts to that same size
Takes forever to download more than a gig for people like me with slow Internet, no other reason
Click to expand...
Click to collapse
Hmm.. downloading it now and wondering why it's only 120mb, not 440mb as you said.

rugglez said:
Can you install the dependencies from Raum's CM10 building thread here?
Follow steps 1 and 2 there.
Let me know if that works, ive updated the guide's step 1(setting up environment)
Installing the dependencies from this guide was the only thing i didnt test, since i had the CM10 environment set up already
Click to expand...
Click to collapse
Thanks, ok now using your updated guide.
Btw, did you happen to upload a copy of the kernel zip file? Downloading from github takes forever, only 8 kb/s.

aldyu said:
Thanks, ok now using your updated guide.
Btw, did you happen to upload a copy of the kernel zip file? Downloading from github takes forever, only 8 kb/s.
Click to expand...
Click to collapse
Just use "git clone git://github.com/CyanogenMod/lge-kernel-star.git", it should give you better download speed than for the zipped archive.
I synced the whole CM10 source tree on the remote buildbox in about 5-10 minutes - so github does provide great downspeed
@rugglez: You should add to the OP that you don't have to use adb to get the kernel config, it's already there
arch/arm/configs/cyanogenmod_p990_defconfig
Please refer to the old cm7 kernel how to by pastime: http://forum.xda-developers.com/showthread.php?t=1227241
I really like the fact that more and more building guides get posted here - and that more and more people are building their own ROMs and kernels these days.
After building (which already is a great start) many people even want to learn more about android development in general. That's the true xda spirit!
Kudos!

How To Build a Kernel

Why would you want to build a kernel yourself?
Click to expand...
Click to collapse
Have you read this: http://forum.xda-developers.com/showpost.php?p=21006133&postcount=1144
In that spirit, I'm going to attempt to write a plain-English tutorial on what to do to build this kernel. In fact, change one or two URLs, and you could build practically any kernel!
Note: I'm assuming you're on a PC here. I'm also assuming this isn't your first trip to linux-land, and you've at least used the terminal a few times before now. I'm also going to assume that even if you are a noob, you're not mentally sub-normal.
Note2: If this is your first time building a kernel, you may want to print this out, and go slowly, and if you get stuck, post about it in the thread! It will help me improve the guide.
What makes this different to other tutorials?
Click to expand...
Click to collapse
I'm a noob at building, but a professional at teaching. It's literally my job! In my noobishness, I made good records of pretty much every step, and I've got lots of time for explaining what each step actually does.
THE STEPS
Got a computer?
Click to expand...
Click to collapse
You'll need one to compile stuff. "For Gingerbread (2.3.x) and newer versions, including the master branch, a 64-bit environment is required." (source)
OK. You're probably thinking of compiling a kernel for ICS or higher right? Is your computer only 32 bit? Pull the processor off the motherboard and count the pins. Just kidding. It won't matter if it is AMD or Intel, but it needs to be a 64 bit processor. I can compile a kernel with just 2GB of RAM and my processor is approaching its 9 year. Even with this lousy set-up, compiling a whole kernel from scratch takes only five minutes.
Install Ubuntu 10.04 64-bit. (Click on this link to download the install CD.)
If you've got a spare hard drive, use the whole thing. If you're good at partitioning, you might consider putting the linux swap partition on a separate disk. You'll want it to be at least 8GB. Putting it on a separate disk will speed things up.
If you don't have a spare disk, you're going to have to resize a partition of an existing OS, to make some new space for Ubuntu. Lets say a minimum of 12GB for the OS plus 8GB for the swap. The more space you can give to the OS, the easier your life will be if you're serious about building stuff.
At the end of the installation it will ask to install a boot-loader. This should be on sda (not sda1!) but you may need to adjust your BIOS to point at the right hard-drive if you later find it doesn't boot into Ubuntu when you restart. Don't worry about Windows, Ubuntu provides a boot menu, so you have the option of booting to Windows instead.
Once Ubuntu is installed, reboot then open a terminal and sort out your credentials:
Code:
sudo passwd root
Type in the password you set during the install, then decide on a password for the root user, and enter it once, then again for confirmation. It can be the same as your user password if you like.
Do some updates (this could take a while):
Code:
sudo apt-get update && sudo apt-get dist-upgrade
When it's finally finished, you'll have to reboot, then repeat until there's no updates left.
You're ready to set up a build environment!
Click to expand...
Click to collapse
First, you need a whole bunch of packages. You could copy and paste this into your terminal:
Code:
sudo add-apt-repository "deb http://archive.canonical.com/ lucid partner" && sudo apt-get update && sudo apt-get install sun-java6-jdk
That's java sorted.
Next up is the dependencies for compiling stuff:
Code:
sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl zlib1g-dev libc6-dev lib32ncurses5-dev ia32-libs x11proto-core-dev libx11-dev lib32readline5-dev lib32z-dev libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown libxml2-utils xsltproc libsdl-dev libesd0-dev libwxgtk2.6-dev libncurses5-dev lib32z1-dev gcc-multilib git-core && sudo ln -s /usr/lib32/mesa/libGL.so.1 /usr/lib32/mesa/libGL.so
I think I remember getting an error for one of these. Possibly lib32readline5-dev. If you get that error, make sure you install everything else. Please let me know, and I'll update this step with a fix.
Make sure ADB is initialised:
Code:
gedit /etc/udev/rules.d/51-android.rules
and copy the below into a blank text file, then edit both instances of <username> to your Ubuntu username (lower-case!) and no chevrons: ="<bedalus>" is wrong. You want ="bedalus"
Code:
# adb protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e22", MODE="0600", OWNER="<username>"
# fastboot protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e20", MODE="0600", OWNER="<username>"
Now save the file!
Get hold of a Cross-Compiler
Click to expand...
Click to collapse
Follow this link to Mentor Graphics Sourcery CodeBench LITE and do a free signup to get the download link. You can get hold of other ones, like Linaro or Google's own, but I'm using this as an example, because it's the one I use, and Ezekeel published some R&D here that showed there was no measurable benefit to one toolchain over another.
When you've downloaded it, you need to copy it to /opt:
Code:
cd /home/<username>/Downloads
cp arm-some-date-some-version-some-arch.tar.bz2 /opt
Note- Obviously that's not the actual name of the file! But you can see what it's really called when you download it.
Now go to /opt and unpack it:
Code:
cd /opt
tar xjf arm-some-date-some-version-some-arch.tar.bz2
So I've got all the tools. Now what?
Click to expand...
Click to collapse
So now you need to get some source code. You can use 'git clone' if you don't plan on publishing your kernel. But if you've made some modifications and want to share your end result, you need to obey the GPL terms for the linux kernel, which is Open Source, meaning that you are required to make your source available publicly.
Go to github: https://github.com/
...and sign up. It's just a free registration provided you are non-commercial. Github has some useful getting started tutorials, which I suggest you follow:
https://help.github.com/articles/set-up-git
(just follow that first page for now. I will walk you through git in a bit...)
Next, fork a repo:
Go to whichever kernel you like: https://github.com/bedalus/bedalusKERNEL
I'm using mine as an example. Look for the big 'Fork' button.
You've now got your own copy on github, and you can do whatever you like with it, without affecting the original.
However, it's no use if it exists only in the cloud. You need to get a local copy. You'll also want something called a 'remote tracking branch', which will enable you to keep up-to-date with the changes going on in the original repository that you have forked-off from.
Critical Step:
Click to expand...
Click to collapse
Shout 'fork-off!' at the top of your voice.
Uh... okay. Now, to get a local copy, and set up your remote-tracking branches, execute:
Code:
cd /home/<username>/
mkdir mykernel
...you can name your new directory whatever you want. It doesn't have to be 'mykernel', then:
Code:
git clone https://github.com/<your github username>/bedalusKERNEL.git
In the above, put your git username, and substitute bedalusKERNEL.git for whatever your fork is called. You can actually copy and paste the URL from the top of your new github repo's page if you want.
It's going to download about 800MB if I remember correctly. This will take a while, so go have some marmite on toast.
When that's done, you're ready for the remote-tracking branch:
Code:
cd bedalusKERNEL (or whatever your fork is called)
git remote add upstream https://github.com/bedalus/bedalusKERNEL.git
git fetch upstream
The 'git remote add upstream' creates a new branch called upstream, and any changes that the original developer uploads to github can be fetched to your machine with the 'git fetch upstream' command. Notice how this time, the download time is much shorter? That's because of 'delta downloads' which only downloads the differences between what you have, and what they have. (There's some technical detail here.)
Git Tip No. 1: What branches do I have?
Click to expand...
Click to collapse
You can now enter:
Code:
git branch
...to see all your branches. At this point there should be 'origin' and 'upstream'.
Git Tip No. 2: How do I change branches?
Click to expand...
Click to collapse
Changing branches (you might as well do this now just to have a little go):
Code:
git checkout upstream
That will move you onto the upstream branch, as long as you haven't made any 'uncommited' changes in origin. (More on that later.) Change back to origin with:
Code:
git checkout origin
Git Tip No. 3: How do I rename a branch?
Click to expand...
Click to collapse
You might want to rename your branches to help personalise them, just to make remembering which is which a little bit easier. To change origin to 'my_version' do this:
Code:
git branch -m origin my_version
You can change upstream to 'their_version' or something else if you want to. It won't stop anything from working.
More Git Tips later. Let's sort out a build script. If you tinker with any code, you'll inevitably break stuff, and need to fix it, and then need to try building again... So, having a build script is going to save you a lot of time, because there are several steps that can be automated.
Here's how the start of my script looks:
Code:
#!/bin/sh
cd /home/dave/mykernel
git branch
read -p "Correct branch? [Y/N]: " -n 1
if [[ ! $REPLY =~ ^[Yy]$ ]]
then
echo -e "\n"
exit 1
fi
This is just a little precaution that I put in to give myself the chance to abort the build before it starts if I'm on the wrong branch. If I don't hit y then the script aborts, and I can checkout the right branch, then restart the script.
Code:
echo -e "\nSTARTING...\n"
The \n prints a new line, then on that new line the message 'STARTING...' and then begins another new line. If you put \n\n you can print a blank line. The echo command is a good way of putting notices in a script so you know what stage it is at.
Code:
export PATH=$PATH:/opt/toolchain/bin/
export ARCH=arm
export SUBARCH=arm
export CROSS_COMPILE=arm-none-eabi-
If you put these lines in your script, it sets 'environment variables' that tells the make program where to find the compiler, and what processor it's compiling for (ARM).
If you now save your script in the /mykernel directory you created earlier, git can keep track of it as well as the files integral to the kernel. Save it as whatever you like, e.g. "myscript.sh"
...It's important to have the .sh extension so the system knows it is a script.
To make your script executable, run:
Code:
chmod a+x myscript.sh
Before you execute the script, you need a .config file in the mykernel directory. If you've cloned my repo, you can get a working one by executing:
Code:
cp arch/arm/configs/crespo_release_defconfig ./.config
...this command will only work properly if you are in the mykernel directory when you execute it.
You can mess with this config file if you like! But it's very easy to break the kernel. However, you can always just copy the crespo_release_defconfig again.
Now, to execute the build script run:
Code:
./myscript
If you execute your script, your compiler will now build the kernel. It will take time, but even on my ten-years-old PC it takes less than ten minutes from scratch.
The compiler will spit out a lot of messages. Most of the time it's telling you that it has compiled an object (i.e. a .o file, which will all be linked up later to form the kernel) and sometimes you'll see warnings, which is the compiler telling you it thinks something might be wrong. Don't worry, most of the time the compiler is just being over-cautious.
If the compiler hits a real problem with the code, it will print an error, and tell you what file, and what line, and how far along that line it managed to get to before it didn't know what to do. I'll get back to this later. For now, let's assume everything compiled.
You'll see a message about the zImage being created. That's the kernel. You can't use it as it is, you need to put it into a boot.img so you can flash it.
I find it useful to add this command in my build-script:
Code:
ls -l /home/dave/mykernel/arch/arm/boot/zImage
ls -l means list with long format. It'll print out the entire contents of a directory with size, time, permissions, etc. if you execute it in a directory, or point it to a directory. However, in the command above, I've pointed it specifically at the zImage file, so it only prints out the details for that. This is so I can check the time. If the time is from yesterday, I can see quickly that there has been an error in the build, and the zImage is still the same one I built yesterday, or an hour ago... etc. depending on the time-stamp printed out.
If you get a 'No such file' error, it's because there is no old zImage, because you haven't ever successfully built one yet.
If you sat and watched the entire thing build, then the timestamp should show the current time, minus a few seconds.
How do I make this zImage into a CWM flashable .zip file?
Click to expand...
Click to collapse
Yay! You've built a kernel. Now you need to make everybody else flash it to their phones too
To do this you need to put it into a boot.img, and then into a .zip file.
Making the boot.img
Click to expand...
Click to collapse
Download this: http://d-h.st/wVZ (make-boot necessary files)
It's a small download. It's some very simple tools that can split an existing boot image into a ramdisk and zImage, and can also stitch them back up.
Move mkboot.zip into your mykernel folder, right click on it, and select 'Extract Here'. You can now delete mkboot.zip. There is a tool called unbootimg, that can take apart existing boot.img files, I've made things simple by including my own ramdisk, which is compatible with AOSP and CM ROMs. That file is called cyan2disk_new.cpio.gz
We now need to add some new stuff to the script to stitch our zImage and ramdisk together.
If you've not already added the ls -l command I mentioned above, also add this now. Then:
Code:
cp /home/dave/mykernel/arch/arm/boot/zImage /home/dave/mykernel/mkboot/
cd /home/dave/mykernel/mkboot
./mkbootimg --kernel zImage --ramdisk cyan2disk_new.cpio.gz --cmdline 'no_console_suspend=1 console=bull's --base 0x30000000 --pagesize 4096 -o boot.img
Remember, your username is not dave! Unless it is. Make the appropriate changes to the path.
How do I make the CWM flashable .zip file?
We're nearly there! This bit is relatively painless. At this point you could save and run the script to check that mkboot is working. If it has worked you can use the same ls -l trick from before, but this time target the boot.img file you just created. If the time-stamp is fresh, it means your boot.img is correct.
TIP: If you haven't switched branches, or run 'make clean', all your .o files are unchanged. The make program keeps track of changes, and only recompiles .o files when the corresponding .c file has been altered. If nothing has changed, your build script will execute very quickly!
To make a flashable .zip file, the easiest thing to do is modify an existing .zip file. You can download my kernel for simplicity, since it already has the necessary script for flashing the entire boot partition. (Most kernels here use koush's any-kernel script, which updates only the zImage and keeps the boot partition's existing ramdisk, so if you try to use another kernel .zip as a template, make sure you correct their updater-script. Using my ramdisk and kernel script will also ensure you keep MTP!)
Once you've downloaded my kernel you should extract it in your home folder, then rename the directory to something like 'myzip'
Now add these lines to your build-script:
Code:
cp /home/dave/mykernel/mkboot/boot.img /home/dave/myzip/boot.img
cp /home/dave/mykernel/drivers/scsi/scsi_wait_scan.ko /home/dave/myzip/system/modules/
"What's that second line? With the .ko file?" I hear you say. Depending on what modules you build, you'll need to copy all of them to the folder specified above. Fortunately, when the kernel finishes building, it tells you what modules have also been built. If you don't want modules in your kernel, you can remove the second line above. However, you must edit your .config file: Open it in gedit, use CTRL+F to open the find dialogue, then type "=m" Now, change every one you find into a "=y" ...so now instead of building modules, the kernel will now incorporate all that code into the zImage instead.
Finally, add this line to your build-script:
Code:
7z a -r -tzip /home/dave/mykernel.zip /home/dave/myzip/*
Run the script again. if everything has gone smoothly, then you now have a flashable .zip in your home directory!
Congratulations!
* * * * * * * * *
More git tips!
Click to expand...
Click to collapse
I've compiled a list of commands you may find handy when getting to know git.
Add a remote branch and track it
git remote add ezekeel git://github.com/Ezekeel/GLaDOS-nexus-s-ics.git
git fetch ezekeel
git checkout --track -b bln ezekeel/bln
Merge in the changes
git merge bln
Resolve conflicts
git mergetool
List local branches
git branch
List remote branches
git branch -r
Switch branch
git checkout branch_name
Rename a branch
git branch -m old_branch_name new_branch_name
View log with short sha1 hash
git log -10 --pretty=format:"%h - %ar: %s"
Restore to a particular point
(IMPORTANT! Don't do this if you've already pushed your commits to github!)
git reset --hard <sha1 hash>
Restore to your last commit
git reset --hard HEAD
Restore to one commit before your last commit:
git reset --hard HEAD^
Restore to two commits before your last commit:
git reset --hard HEAD^^ (etc.)
As long as you haven't pushed to github,
squash all your recent commits into one:
git rebase -i <sha1> ...then change push to squash (or fixup) for all except the first one
git rebase -i --abort (to abort!)
Add .file (i.e. hidden file)
git add .file (simple!)
Add all new and modified files
git add .
Deleting files
(i.e. after doing rm <files>)
git add -u (git will note which files have been deleted)
Bring files from a directory in another branch
git checkout cyanogenmod drivers/cpufreq/
Tells you what changes you've made so far
git status
Commit your changes
git commit (type in your notes about what you did, then CTRL+X then Y to save)
Sync your commits to your github repo
git push <repo_name> <branch_name>
Delete a remote branch
(WARNING: This will delete the entire branch from github
Note: You cannot do this to the default github branch, but you can change the default branch in the admin tab on the website)
git push <repo_name> :<branch to be deleted>
General tips! File management, searching... etc.
Click to expand...
Click to collapse
Find a file (useful for troubleshooting in some situations)
find /home/dave/ -name 'buildlean.sh'
(searches the home folder and subdirectories for 'buildlean.sh')
Find within any *.c file, the text "s5pv210_driver" (good for finding bits of code)
find ./ -type f -name *.c | xargs grep s5pv210_driver
Find within any file, the text "s5pv210_driver" (good for finding bits of code)
find ./ -type f | xargs grep s5pv210_driver
Special Mention : bedalus [Original maker of this Post]. Thank Him Not Me!!
I will not help in this thread as I am not a kernel Dev. I just kanged it here so there Can Be New Developers
Click to expand...
Click to collapse
Click to expand...
Click to collapse

I m getting an error which you've mentioned after applying this code
sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl zlib1g-dev libc6-dev lib32ncurses5-dev ia32-libs x11proto-core-dev libx11-dev lib32readline5-dev lib32z-dev libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown libxml2-utils xsltproc libsdl-dev libesd0-dev libwxgtk2.6-dev libncurses5-dev lib32z1-dev gcc-multilib git-core && sudo ln -s /usr/lib32/mesa/libGL.so.1 /usr/lib32/mesa/libGL.so
Click to expand...
Click to collapse
EDIT: page not found https://github.com/bedalus/bedalusKERNEL

l0lh4rd said:
I m getting an error which you've mentioned after applying this code
EDIT: page not found https://github.com/bedalus/bedalusKERNEL
Click to expand...
Click to collapse
Ubuntu??
Which Device??

mithun46 said:
Ubuntu??
Which Device??
Click to expand...
Click to collapse
Ubuntu 12.04 LTS (x64)

l0lh4rd said:
Ubuntu 12.04 LTS (x64)
Click to expand...
Click to collapse
Device???????

@l0lh4rd
Your device probably has different sources. And the page was not found because bedalus doesn't have any public repo by that name anymore.

Below
Sent from my GT-S5360 using xda app-developers app

thanks i'll find a time and try.

I am going to say WOW. Is everyone as lost and confused about what this is or does? I know I am. First off. I think you started off with a very good Tut. The problem is, you never said what you are compiling or what its for. The more advance users can figure it out and actually understand what you said. But what about the n00bs here? If I understand the jibberish you are compiling a Arm kernel off of linux. It would have been more useful if you had mentioned that this is the Arm kernal for the android platform. It would have also been better if you had said what chip your where using. Is this for the Arm5, Arm6, Arm7? You should also give warning about compiling the kernal and how they can screw things up if they don't follow the steps properly and not to skip or try something that is not listed. You also say that you are using Ubuntu, which alot do, but not all. Some use other distro's and that this may not work on all flavors of linux. Some use different commands and some repo's don't work on all distro's either.
Other then that, pretty nice Tut.

mithun46 said:
Have you read this: http://forum.xda-developers.com/showpost.php?p=21006133&postcount=1144
In that spirit, I'm going to attempt to write a plain-English tutorial on what to do to build this kernel. In fact, change one or two URLs, and you could build practically any kernel!
Note: I'm assuming you're on a PC here. I'm also assuming this isn't your first trip to linux-land, and you've at least used the terminal a few times before now. I'm also going to assume that even if you are a noob, you're not mentally sub-normal.
Note2: If this is your first time building a kernel, you may want to print this out, and go slowly, and if you get stuck, post about it in the thread! It will help me improve the guide.
I'm a noob at building, but a professional at teaching. It's literally my job! In my noobishness, I made good records of pretty much every step, and I've got lots of time for explaining what each step actually does.
THE STEPS
You'll need one to compile stuff. "For Gingerbread (2.3.x) and newer versions, including the master branch, a 64-bit environment is required." (source)
OK. You're probably thinking of compiling a kernel for ICS or higher right? Is your computer only 32 bit? Pull the processor off the motherboard and count the pins. Just kidding. It won't matter if it is AMD or Intel, but it needs to be a 64 bit processor. I can compile a kernel with just 2GB of RAM and my processor is approaching its 9 year. Even with this lousy set-up, compiling a whole kernel from scratch takes only five minutes.
Install Ubuntu 10.04 64-bit. (Click on this link to download the install CD.)
If you've got a spare hard drive, use the whole thing. If you're good at partitioning, you might consider putting the linux swap partition on a separate disk. You'll want it to be at least 8GB. Putting it on a separate disk will speed things up.
If you don't have a spare disk, you're going to have to resize a partition of an existing OS, to make some new space for Ubuntu. Lets say a minimum of 12GB for the OS plus 8GB for the swap. The more space you can give to the OS, the easier your life will be if you're serious about building stuff.
At the end of the installation it will ask to install a boot-loader. This should be on sda (not sda1!) but you may need to adjust your BIOS to point at the right hard-drive if you later find it doesn't boot into Ubuntu when you restart. Don't worry about Windows, Ubuntu provides a boot menu, so you have the option of booting to Windows instead.
Once Ubuntu is installed, reboot then open a terminal and sort out your credentials:
Code:
sudo passwd root
Type in the password you set during the install, then decide on a password for the root user, and enter it once, then again for confirmation. It can be the same as your user password if you like.
Do some updates (this could take a while):
Code:
sudo apt-get update && sudo apt-get dist-upgrade
When it's finally finished, you'll have to reboot, then repeat until there's no updates left.
First, you need a whole bunch of packages. You could copy and paste this into your terminal:
Code:
sudo add-apt-repository "deb http://archive.canonical.com/ lucid partner" && sudo apt-get update && sudo apt-get install sun-java6-jdk
That's java sorted.
Next up is the dependencies for compiling stuff:
Code:
sudo apt-get install git-core gnupg flex bison gperf build-essential zip curl zlib1g-dev libc6-dev lib32ncurses5-dev ia32-libs x11proto-core-dev libx11-dev lib32readline5-dev lib32z-dev libgl1-mesa-dev g++-multilib mingw32 tofrodos python-markdown libxml2-utils xsltproc libsdl-dev libesd0-dev libwxgtk2.6-dev libncurses5-dev lib32z1-dev gcc-multilib git-core && sudo ln -s /usr/lib32/mesa/libGL.so.1 /usr/lib32/mesa/libGL.so
I think I remember getting an error for one of these. Possibly lib32readline5-dev. If you get that error, make sure you install everything else. Please let me know, and I'll update this step with a fix.
Make sure ADB is initialised:
Code:
gedit /etc/udev/rules.d/51-android.rules
and copy the below into a blank text file, then edit both instances of <username> to your Ubuntu username (lower-case!) and no chevrons: ="<bedalus>" is wrong. You want ="bedalus"
Code:
# adb protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e22", MODE="0600", OWNER="<username>"
# fastboot protocol on crespo/crespo4g (Nexus S)
SUBSYSTEM=="usb", ATTR{idVendor}=="18d1", ATTR{idProduct}=="4e20", MODE="0600", OWNER="<username>"
Now save the file!
Follow this link to Mentor Graphics Sourcery CodeBench LITE and do a free signup to get the download link. You can get hold of other ones, like Linaro or Google's own, but I'm using this as an example, because it's the one I use, and Ezekeel published some R&D here that showed there was no measurable benefit to one toolchain over another.
When you've downloaded it, you need to copy it to /opt:
Code:
cd /home/<username>/Downloads
cp arm-some-date-some-version-some-arch.tar.bz2 /opt
Note- Obviously that's not the actual name of the file! But you can see what it's really called when you download it.
Now go to /opt and unpack it:
Code:
cd /opt
tar xjf arm-some-date-some-version-some-arch.tar.bz2
So now you need to get some source code. You can use 'git clone' if you don't plan on publishing your kernel. But if you've made some modifications and want to share your end result, you need to obey the GPL terms for the linux kernel, which is Open Source, meaning that you are required to make your source available publicly.
Go to github: https://github.com/
...and sign up. It's just a free registration provided you are non-commercial. Github has some useful getting started tutorials, which I suggest you follow:
https://help.github.com/articles/set-up-git
(just follow that first page for now. I will walk you through git in a bit...)
Next, fork a repo:
Go to whichever kernel you like: https://github.com/bedalus/bedalusKERNEL
I'm using mine as an example. Look for the big 'Fork' button.
You've now got your own copy on github, and you can do whatever you like with it, without affecting the original.
However, it's no use if it exists only in the cloud. You need to get a local copy. You'll also want something called a 'remote tracking branch', which will enable you to keep up-to-date with the changes going on in the original repository that you have forked-off from.
Shout 'fork-off!' at the top of your voice.
Uh... okay. Now, to get a local copy, and set up your remote-tracking branches, execute:
Code:
cd /home/<username>/
mkdir mykernel
...you can name your new directory whatever you want. It doesn't have to be 'mykernel', then:
Code:
git clone https://github.com/<your github username>/bedalusKERNEL.git
In the above, put your git username, and substitute bedalusKERNEL.git for whatever your fork is called. You can actually copy and paste the URL from the top of your new github repo's page if you want.
It's going to download about 800MB if I remember correctly. This will take a while, so go have some marmite on toast.
When that's done, you're ready for the remote-tracking branch:
Code:
cd bedalusKERNEL (or whatever your fork is called)
git remote add upstream https://github.com/bedalus/bedalusKERNEL.git
git fetch upstream
The 'git remote add upstream' creates a new branch called upstream, and any changes that the original developer uploads to github can be fetched to your machine with the 'git fetch upstream' command. Notice how this time, the download time is much shorter? That's because of 'delta downloads' which only downloads the differences between what you have, and what they have. (There's some technical detail here.)
You can now enter:
Code:
git branch
...to see all your branches. At this point there should be 'origin' and 'upstream'.
Changing branches (you might as well do this now just to have a little go):
Code:
git checkout upstream
That will move you onto the upstream branch, as long as you haven't made any 'uncommited' changes in origin. (More on that later.) Change back to origin with:
Code:
git checkout origin
You might want to rename your branches to help personalise them, just to make remembering which is which a little bit easier. To change origin to 'my_version' do this:
Code:
git branch -m origin my_version
You can change upstream to 'their_version' or something else if you want to. It won't stop anything from working.
More Git Tips later. Let's sort out a build script. If you tinker with any code, you'll inevitably break stuff, and need to fix it, and then need to try building again... So, having a build script is going to save you a lot of time, because there are several steps that can be automated.
Here's how the start of my script looks:
Code:
#!/bin/sh
cd /home/dave/mykernel
git branch
read -p "Correct branch? [Y/N]: " -n 1
if [[ ! $REPLY =~ ^[Yy]$ ]]
then
echo -e "\n"
exit 1
fi
This is just a little precaution that I put in to give myself the chance to abort the build before it starts if I'm on the wrong branch. If I don't hit y then the script aborts, and I can checkout the right branch, then restart the script.
Code:
echo -e "\nSTARTING...\n"
The \n prints a new line, then on that new line the message 'STARTING...' and then begins another new line. If you put \n\n you can print a blank line. The echo command is a good way of putting notices in a script so you know what stage it is at.
Code:
export PATH=$PATH:/opt/toolchain/bin/
export ARCH=arm
export SUBARCH=arm
export CROSS_COMPILE=arm-none-eabi-
If you put these lines in your script, it sets 'environment variables' that tells the make program where to find the compiler, and what processor it's compiling for (ARM).
If you now save your script in the /mykernel directory you created earlier, git can keep track of it as well as the files integral to the kernel. Save it as whatever you like, e.g. "myscript.sh"
...It's important to have the .sh extension so the system knows it is a script.
To make your script executable, run:
Code:
chmod a+x myscript.sh
Before you execute the script, you need a .config file in the mykernel directory. If you've cloned my repo, you can get a working one by executing:
Code:
cp arch/arm/configs/crespo_release_defconfig ./.config
...this command will only work properly if you are in the mykernel directory when you execute it.
You can mess with this config file if you like! But it's very easy to break the kernel. However, you can always just copy the crespo_release_defconfig again.
Now, to execute the build script run:
Code:
./myscript
If you execute your script, your compiler will now build the kernel. It will take time, but even on my ten-years-old PC it takes less than ten minutes from scratch.
The compiler will spit out a lot of messages. Most of the time it's telling you that it has compiled an object (i.e. a .o file, which will all be linked up later to form the kernel) and sometimes you'll see warnings, which is the compiler telling you it thinks something might be wrong. Don't worry, most of the time the compiler is just being over-cautious.
If the compiler hits a real problem with the code, it will print an error, and tell you what file, and what line, and how far along that line it managed to get to before it didn't know what to do. I'll get back to this later. For now, let's assume everything compiled.
You'll see a message about the zImage being created. That's the kernel. You can't use it as it is, you need to put it into a boot.img so you can flash it.
I find it useful to add this command in my build-script:
Code:
ls -l /home/dave/mykernel/arch/arm/boot/zImage
ls -l means list with long format. It'll print out the entire contents of a directory with size, time, permissions, etc. if you execute it in a directory, or point it to a directory. However, in the command above, I've pointed it specifically at the zImage file, so it only prints out the details for that. This is so I can check the time. If the time is from yesterday, I can see quickly that there has been an error in the build, and the zImage is still the same one I built yesterday, or an hour ago... etc. depending on the time-stamp printed out.
If you get a 'No such file' error, it's because there is no old zImage, because you haven't ever successfully built one yet.
If you sat and watched the entire thing build, then the timestamp should show the current time, minus a few seconds.
Yay! You've built a kernel. Now you need to make everybody else flash it to their phones too
To do this you need to put it into a boot.img, and then into a .zip file.
Download this: http://d-h.st/wVZ (make-boot necessary files)
It's a small download. It's some very simple tools that can split an existing boot image into a ramdisk and zImage, and can also stitch them back up.
Move mkboot.zip into your mykernel folder, right click on it, and select 'Extract Here'. You can now delete mkboot.zip. There is a tool called unbootimg, that can take apart existing boot.img files, I've made things simple by including my own ramdisk, which is compatible with AOSP and CM ROMs. That file is called cyan2disk_new.cpio.gz
We now need to add some new stuff to the script to stitch our zImage and ramdisk together.
If you've not already added the ls -l command I mentioned above, also add this now. Then:
Code:
cp /home/dave/mykernel/arch/arm/boot/zImage /home/dave/mykernel/mkboot/
cd /home/dave/mykernel/mkboot
./mkbootimg --kernel zImage --ramdisk cyan2disk_new.cpio.gz --cmdline 'no_console_suspend=1 console=bull's --base 0x30000000 --pagesize 4096 -o boot.img
Remember, your username is not dave! Unless it is. Make the appropriate changes to the path.
How do I make the CWM flashable .zip file?
We're nearly there! This bit is relatively painless. At this point you could save and run the script to check that mkboot is working. If it has worked you can use the same ls -l trick from before, but this time target the boot.img file you just created. If the time-stamp is fresh, it means your boot.img is correct.
TIP: If you haven't switched branches, or run 'make clean', all your .o files are unchanged. The make program keeps track of changes, and only recompiles .o files when the corresponding .c file has been altered. If nothing has changed, your build script will execute very quickly!
To make a flashable .zip file, the easiest thing to do is modify an existing .zip file. You can download my kernel for simplicity, since it already has the necessary script for flashing the entire boot partition. (Most kernels here use koush's any-kernel script, which updates only the zImage and keeps the boot partition's existing ramdisk, so if you try to use another kernel .zip as a template, make sure you correct their updater-script. Using my ramdisk and kernel script will also ensure you keep MTP!)
Once you've downloaded my kernel you should extract it in your home folder, then rename the directory to something like 'myzip'
Now add these lines to your build-script:
Code:
cp /home/dave/mykernel/mkboot/boot.img /home/dave/myzip/boot.img
cp /home/dave/mykernel/drivers/scsi/scsi_wait_scan.ko /home/dave/myzip/system/modules/
"What's that second line? With the .ko file?" I hear you say. Depending on what modules you build, you'll need to copy all of them to the folder specified above. Fortunately, when the kernel finishes building, it tells you what modules have also been built. If you don't want modules in your kernel, you can remove the second line above. However, you must edit your .config file: Open it in gedit, use CTRL+F to open the find dialogue, then type "=m" Now, change every one you find into a "=y" ...so now instead of building modules, the kernel will now incorporate all that code into the zImage instead.
Finally, add this line to your build-script:
Code:
7z a -r -tzip /home/dave/mykernel.zip /home/dave/myzip/*
Run the script again. if everything has gone smoothly, then you now have a flashable .zip in your home directory!
Congratulations!
* * * * * * * * *
I've compiled a list of commands you may find handy when getting to know git.
Add a remote branch and track it
git remote add ezekeel git://github.com/Ezekeel/GLaDOS-nexus-s-ics.git
git fetch ezekeel
git checkout --track -b bln ezekeel/bln
Merge in the changes
git merge bln
Resolve conflicts
git mergetool
List local branches
git branch
List remote branches
git branch -r
Switch branch
git checkout branch_name
Rename a branch
git branch -m old_branch_name new_branch_name
View log with short sha1 hash
git log -10 --pretty=format:"%h - %ar: %s"
Restore to a particular point
(IMPORTANT! Don't do this if you've already pushed your commits to github!)
git reset --hard <sha1 hash>
Restore to your last commit
git reset --hard HEAD
Restore to one commit before your last commit:
git reset --hard HEAD^
Restore to two commits before your last commit:
git reset --hard HEAD^^ (etc.)
As long as you haven't pushed to github,
squash all your recent commits into one:
git rebase -i <sha1> ...then change push to squash (or fixup) for all except the first one
git rebase -i --abort (to abort!)
Add .file (i.e. hidden file)
git add .file (simple!)
Add all new and modified files
git add .
Deleting files
(i.e. after doing rm <files>)
git add -u (git will note which files have been deleted)
Bring files from a directory in another branch
git checkout cyanogenmod drivers/cpufreq/
Tells you what changes you've made so far
git status
Commit your changes
git commit (type in your notes about what you did, then CTRL+X then Y to save)
Sync your commits to your github repo
git push <repo_name> <branch_name>
Delete a remote branch
(WARNING: This will delete the entire branch from github
Note: You cannot do this to the default github branch, but you can change the default branch in the admin tab on the website)
git push <repo_name> :<branch to be deleted>
Find a file (useful for troubleshooting in some situations)
find /home/dave/ -name 'buildlean.sh'
(searches the home folder and subdirectories for 'buildlean.sh')
Find within any *.c file, the text "s5pv210_driver" (good for finding bits of code)
find ./ -type f -name *.c | xargs grep s5pv210_driver
Find within any file, the text "s5pv210_driver" (good for finding bits of code)
find ./ -type f | xargs grep s5pv210_driver
Special Mention : bedalus [Original maker of this Post]. Thank Him Not Me!!
I will not help in this thread as I am not a kernel Dev. I just kanged it here so there Can Be New Developers
Click to expand...
Click to collapse
excellent but! you will not have a custom kernel. why?
where did "make menuconfig" go?
you selected yes as default, what if i wanted a custom kernel w/o a "Y" for each?
i want to keep my kernel bare minimal. this is not for minimalistic kernel.?
how you pass other kernel params?
you can pass gcc optimizations in -Os but what if i wish to pass it in the kernel build process?
how on earth using this script? can i include firmwares? aka blobwares which are at times ultimate necessity.....?
what if i want to include my patch and the kernel w/o boot w/o special params or switch....?
how do i set the compression params?
well i am still the old school "make menuconfig" and that
cp arch/arm/configs/crespo_release_defconfig ./.config is not my cup of tea. i still like to roll my own kernel the orthodox method, than this automation.
this is okay if you are building your first kernel and you dont know the process. but this is not the right way if you want a complete fine grained inside out control of the device and the kernel.
NOPE NOPE NOPE!
but the git crash course is excellent. i wanted as usual a git flash cards. thanks
+5 to mithun for the git. everything else i found tasty but was a fruit salad, except git tut. which i found very very well documented.
+5 for git. and +1 for the effort for the kernel info.
hope this helps.
thanks
-paul
p.s. very good effort even tho its cut copy paste but the original post didnt address many kernel issues. hope its updated. hope you take it as a positive feedback.
---------- Post added at 03:08 AM ---------- Previous post was at 03:00 AM ----------
TheStrokerace said:
I am going to say WOW. Is everyone as lost and confused about what this is or does? I know I am. First off. I think you started off with a very good Tut. The problem is, you never said what you are compiling or what its for. The more advance users can figure it out and actually understand what you said. But what about the n00bs here? If I understand the jibberish you are compiling a Arm kernel off of linux. It would have been more useful if you had mentioned that this is the Arm kernal for the android platform. It would have also been better if you had said what chip your where using. Is this for the Arm5, Arm6, Arm7? You should also give warning about compiling the kernal and how they can screw things up if they don't follow the steps properly and not to skip or try something that is not listed. You also say that you are using Ubuntu, which alot do, but not all. Some use other distro's and that this may not work on all flavors of linux. Some use different commands and some repo's don't work on all distro's either.
Other then that, pretty nice Tut.
Click to expand...
Click to collapse
thats what i said, how you select the parms and fine controls like choosing the arm arch type. this doesnt do it. it copies the old config. which is excellent for new comers who wants to start to get their feet wet. but if you are building your custom kernel for arm or amd or i386 or mips? this is not at all helpful. if i were a new comer? i could have clicked on the thanks button. for an advanced user? this is a good read/timepass and nothing else. honestly because i got no control. :-s *Unacceptable*
and mithun you should also tell users how to include patches. if you write patches. how will you patch your kernel before you hit make and make bzimage? nope i am sorry this is good for a stock kernel. which has no info about patch and customization this is not complete. edit it and add more info. if you need help. feel free to ask. there are many kernel chaps here.
good luck mithun.
hope this helps.
thanks
-paul
p.s. i am pedantic at times and people hate me for that, but i am sorry i love being a pedantic moron.
Click to expand...
Click to collapse
Click to expand...
Click to collapse

this thread wanst clealry required man as xda-u already has a post regarding this .. so do something useful.most of the steps here are ready made kang stuff .

if my phone doesn't boot up what can be the cause? is there a specific file that i have to look at or not?

matt95 said:
if my phone doesn't boot up what can be the cause? is there a specific file that i have to look at or not?
Click to expand...
Click to collapse
We can never help without logs. But in this case logcat starts after the kernel has been loaded so you need to figure out what's wrong yourself

speed_bot said:
We can never help without logs. But in this case logcat starts after the kernel has been loaded so you need to figure out what's wrong yourself
Click to expand...
Click to collapse
Cause i'm trying to port the Ubuntu touch preview on my HTC One X but id remains on the bootanimation and i think that the problem is with the kernel itself

matt95 said:
Cause i'm trying to port the Ubuntu touch preview on my HTC One X but id remains on the bootanimation and i think that the problem is with the kernel itself
Click to expand...
Click to collapse
Boot anime can't work without a kernel

speed_bot said:
Boot anime can't work without a kernel
Click to expand...
Click to collapse
The problem is that it is stuck at the bootanimation, what can cause this? do you think it could be kernel related?

matt95 said:
The problem is that it is stuck at the bootanimation, what can cause this? do you think it could be kernel related?
Click to expand...
Click to collapse
First up. Does logcat work?

this is what i get
Code:
$ adb logcat
Unable to open log device '/dev/alog/main': No such file or directory

matt95 said:
this is what i get
Code:
$ adb logcat
Unable to open log device '/dev/alog/main': No such file or directory
Click to expand...
Click to collapse
Thanks for Education

{Z}[WORKSHOP] - AOSP - Android 4.2.2 - FreeXperia Project

Workshop thread for Google AOSP
If you want to have 0 day software then lets start making it
To use any custom software you have to unlock bootloader following sony guide
Thanks to
Sony for providing us the chance to have official AOSP support
All developers that work or worked on android making an dream become reality

This guide is designed for an clean install of Ubuntu-server 13.04 LINK
follow all steps including
mkdir ~/android
cd ~/android
then we will init AOSP repo instead of AOPK
since we want to use 0 day software we will init master branch (default)
$ repo init -u https://android.googlesource.com/platform/manifest
then sync it
$ repo sync -jthread_number
!! thread number can speedup download if you have an good internet connection (any number 4->48 is)
!! depending on your connection can take a lot of time ..... please be patient!
after sync is finished we have to add sony repos
copy attached xml file in repo (remove fake zip extension)
mv sonyxperiadev.xml.zip .repo/local_manifests/sonyxperiadev.xml
sync again to get sony repos
$repo sync
get sony blobs and unpack them in /vendor/sony BLOB_LINK
source build/envsetup.sh
select target
lunch <enter>chose your device number and press enterbuild android images
make -j<cpu thread number>
ex: make -j4 (for i5)!! Take an box of beer and enjoy build will take 5min - 1 day depending on pcFind your images
find -type f |grep *.img will display your img files
flash images
fastboot flash partition image.img
ex:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash userdata data.img

progress :
-added liblights

reserved for bugs

reserved for us

Well, the party begins!!

github account?
Traceback (most recent call last):
File "/home/support/android/.repo/repo/main.py", line 414, in <module>
_Main(sys.argv[1:])
File "/home/support/android/.repo/repo/main.py", line 390, in _Main
result = repo._Run(argv) or 0
File "/home/support/android/.repo/repo/main.py", line 138, in _Run
result = cmd.Execute(copts, cargs)
File "/home/support/android/.repo/repo/subcmds/init.py", line 352, in Execute
self._ConfigureUser()
File "/home/support/android/.repo/repo/subcmds/init.py", line 253, in _ConfigureUser
name = self._Prompt('Your Name', mp.UserName)
File "/home/support/android/.repo/repo/project.py", line 608, in UserName
self._LoadUserIdentity()
File "/home/support/android/.repo/repo/project.py", line 621, in _LoadUserIdentity
u = self.bare_git.var('GIT_COMMITTER_IDENT')
File "/home/support/android/.repo/repo/project.py", line 2202, in runner
p.stderr))
error.GitError: manifests var:
*** Please tell me who you are.
Run
git config --global user.email "[email protected]"
git config --global user.name "Your Name"
to set your account's default identity.
Omit --global to set the identity only in this repository.
fatal: unable to auto-detect email address (got '[email protected]pport-pc.(none)')

You just have to do what it says
Sent from my C6603 using xda premium

I decided to try it yesterday as directed by Sony. All perfect but still does not work neither GSM nor the camera. I guess then the repo sync with the new binaries will be much faster right? We do not know how they progress to solve the two major problems? Thxs.

BoRoU said:
I decided to try it yesterday as directed by Sony. All perfect but still does not work neither GSM nor the camera. I guess then the repo sync with the new binaries will be much faster right? We do not know how they progress to solve the two major problems? Thxs.
Click to expand...
Click to collapse
this is an workshop thread do the ideea is to try and solve bugs ourselves then push to fixes to sony github

good time to start learning to build roms
downloading repo

I I have no programming knowledge I can help?
If I build, compiled and installed the ROM but I do not know what else I can do. I put at your disposal for whatever you want.
Greetings.

BoRoU said:
I I have no programming knowledge I can help?
If I build, compiled and installed the ROM but I do not know what else I can do. I put at your disposal for whatever you want.
Greetings.
Click to expand...
Click to collapse
you can start learning programing
and help us make an dream come true

LOL I hope so. Unfortunately I'm too old and I have very little time for these appliances. Still try to help if only you to do testing work.
Greetings.

I got the same error as somebody else did earlier...
Code:
Traceback (most recent call last):
File "/home/daniel/android/.repo/repo/main.py", line 414, in <module>
_Main(sys.argv[1:])
File "/home/daniel/android/.repo/repo/main.py", line 390, in _Main
result = repo._Run(argv) or 0
File "/home/daniel/android/.repo/repo/main.py", line 138, in _Run
result = cmd.Execute(copts, cargs)
File "/home/daniel/android/.repo/repo/subcmds/init.py", line 352, in Execute
self._ConfigureUser()
File "/home/daniel/android/.repo/repo/subcmds/init.py", line 253, in _ConfigureUser
name = self._Prompt('Your Name', mp.UserName)
File "/home/daniel/android/.repo/repo/project.py", line 608, in UserName
self._LoadUserIdentity()
File "/home/daniel/android/.repo/repo/project.py", line 621, in _LoadUserIdentity
u = self.bare_git.var('GIT_COMMITTER_IDENT')
File "/home/daniel/android/.repo/repo/project.py", line 2202, in runner
p.stderr))
error.GitError: manifests var:
*** Please tell me who you are.
Run
git config --global user.email "[email protected]"
git config --global user.name "Your Name"
to set your account's default identity.
Omit --global to set the identity only in this repository.
fatal: unable to auto-detect email address (got '[email protected](none)')
Apparently my name/email must be inputted (is that a word?) somewhere before I can continue. Any ideas?
Never mind, I fixed it by having a read through the terminal's response.
These comands must be run:
$ git config --global user.email "[email protected]"
$ git config --global user.name "Your Name"

Gonna do repo sync soon I hope that I can be helpful even I am not advanced

FXP said:
This guide is designed for an clean install of Ubuntu-server 13.04 LINK
follow all steps including
mkdir ~/android
cd ~/android
then we will init AOSP repo instead of AOPK
since we want to use 0 day software we will init master branch (default)
$ repo init -u https://android.googlesource.com/platform/manifest
then sync it
$ repo sync -jthread_number
!! thread number can speedup download if you have an good internet connection (any number 4->48 is)
!! depending on your connection can take a lot of time ..... please be patient!
after sync is finished we have to add sony repos
copy attached xml file in repo (remove fake zip extension)
mv sonyxperiadev.xml.zip .repo/local_manifests/sonyxperiadev.xml
sync again to get sony repos
$repo sync
get sony blobs and unpack them in /vendor/sony BLOB_LINK
Click to expand...
Click to collapse
what is next step?
sources are synced and ready

DooMLoRD said:
what is next step?
sources are synced and ready
Click to expand...
Click to collapse
I know it's for CM but could be useful too
http://wiki.cyanogenmod.org/w/Build_for_yuga
Sent from my C6603 using xda premium

DooMLoRD said:
what is next step?
sources are synced and ready
Click to expand...
Click to collapse
. build/envsetup.sh
lunch full_c6603-userdebug
make -j4

jeroenqui said:
. build/envsetup.sh
lunch full_c6603-userdebug
make -j4
Click to expand...
Click to collapse
which are the img file do I need to flash through fastboot?
what is the command to make a zip file?.
thanks

[Guide] A beginners guide to building and modifying a nexus 4 kernel from source

A beginners guide to building and modifying a nexus 4 lollipop* kernel from source.
*currently 5.0.1​Disclaimer
I am not a developer, nor am I an expert. All the information in here I have gleaned from other sources, credited where possible, so it may not be correct and almost certainly isn't the 'best' way to do things. But it works for me. I hope it works for you but there's no guarantee. Use at your own risk
Assumptions
You have access to a computer running Ubuntu - other distros will probably work but this is the one I'm using. You'll need a basic understanding of the Linux command line including, but not limited to, ls, cp, cd, mkdir, make, ~, sudo, nano and so on.
You'll need to know how to use adb & fastboot to copy stuff into and out of your Nexus 4
A basic undersanding of Git is REALLY helpful if you want to modify your kernel. You'll be able to get by using the comands listed but you really need to have a basic understanding of what Git does if you're going to proceed.
CONTENTS
Initialise your build environment
Downloading the sources
Toolchain
Building
Creating a boot.img
A bit more about Git
Modifying kernels (how I got DT2W working)
Making a flashable zip
Initialise your build envronment
The information for this stage came from: here
I installed Ubuntu 14.04.1 LTS from a scratch. I used VM ware on a Windows laptop but any Linux environment can probably be made to work. So, to start, do an update just to be sure, then install the packages you'll need.
Code:
# sudo apt-get update
# sudo apt-get install bison g++-multilib git gperf libxml2-utils
# sudo apt-get install libncurses5-dev:i386
# sudo apt-get install lib32ncurses5-dev
# sudo apt-get install build-essential kernel-package
Downloads
Most of the really helpful information I've used came from here
I've updated the information slightly and changed the device from Flo to Mako but Pete's page is well worth reading for more background information than I've included here.
To download the source into a 'kernel' folder
Code:
# mkdir ~/android
# cd ~/android/
# git clone https://android.googlesource.com/kernel/msm.git kernel
# cd kernel/
# git branch -a
will show you all the current branches of Mako kernels, choose the one you want and checkout that one.
Code:
# git checkout android-msm-mako-3.4-lollipop-release
Now you need to find out exactly which kernel to build. The 'official' method is here
but that involves a significant download for just a few bytes so I suggest you use the following trick. Go to the pre-built kernel you want to copy here
and you wll see the first line after the header is:-
"16e203d lowmemorykiller: enhance debug information"
You need to make a note of the first seven characters, in this case 16e203d.
Next you need to use Git to create a new branch for our specific kernel. I've called it 'android-lollipop-release'.
Code:
# git checkout -b android-lollipop-release 16e203d
This will extract the source for the kernel we're going to build.
Toolchain
I'm using the stock toolchain (thanks @zaclimon) but will add an alternative suggested by @aviz1911 as time allows.
I'm going to install the toolchain in /usr/local/share but there are other places you could sensibly put it.
Code:
# cd /usr/local/share
sudo git clone [url]https://android.googlesource.com/platform/prebuilts/gcc/linux-x86/arm/arm-eabi-4.7[/url]
Export the path to the toolchain and check it works. Note these exports only work for the current session, if you want to add permanently put it in your .bashrc or .profile
Code:
# export PATH=$PATH:/usr/local/share/arm-eabi-4.7/bin
# cd ~
Test it works with
Code:
# arm-eabi-gcc --version
Now you need to tell the system we want to cross compile.
Code:
# export ARCH=arm
# export SUBARCH=arm
# export CROSS_COMPILE=arm-eabi-
Building
Now you're ready to start.
Code:
#cd ~/android/kernel
# make mako_defconfig
You'll get some warnings like this which you can ignore
warning: (ARCH_MSM_KRAITMP && ARCH_MSM_CORTEX_A5) selects HAVE_HW_BRKPT_RESERVED_RW_ACCESS which has unmet direct dependencies (HAVE_HW_BREAKPOINT)
Code:
# make menuconfig
this is where you can make some changes if you like, we're going to change just the name. Choose General Setup ---> then select
(-perf) Local version - append to kernel release
and change perf to anything you like, I'll use dt2w
Save and exit
Code:
# make -j2
where 2 is twice the number of cores on your machine - there's just one processor on my VM but could be many more on yours. It takes more than half an hour on my machine. Then you should see
Code:
Kernel: arch/arm/boot/zImage is ready
Ta Daaaaa - you have built a kernel - now you need to pack it for testing on your phone.
Creating a boot.img
Again I'm going to use Pete's blog post as my guide but omit some details and just get the job done. I'm not going to explain all the steps, you'll have to investigate yourself if you want to understand more.
Code:
# cd ~/android
# git clone https://github.com/pbatard/bootimg-tools.git bootimg-tools
# cd bootimg-tools/libmincrypt/
# gcc -c *.c -I../include
# # cd ../mkbootimg
# gcc mkbootimg.c -o mkbootimg -I../include ../libmincrypt/libmincrypt.a
# sudo cp mkbootimg /usr/local/bin/
# gcc -o unmkbootimg unmkbootimg.c
# sudo cp unmkbootimg /usr/local/bin/
You need an original boot img to copy so you can insert your new kernel into it. Download the factory image.
Code:
# mkdir ~/android/boot
# cd ~/android/boot
# wget https://dl.google.com/dl/android/aosp/occam-lrx22c-factory-86c04af6.tgz
# tar -xvf occam-lrx22c-factory-86c04af6.tgz
# cd occam-lrx22c/
# unzip occam-lrx22c-factory-86c04af6.zip
# cp boot.img ../
# cd ~/android/boot
Now it's time to unpack the original boot image. unmkbooting will tell you all the parameters you need to repack the boot image with your new kernel inside.
Code:
# unmkbootimg -i boot.img
kernel written to 'kernel' (6009416 bytes)
ramdisk written to 'ramdisk.cpio.gz' (490557 bytes)
To rebuild this boot image, you can use the command:
mkbootimg --base 0 --pagesize 2048 --kernel_offset 0x80208000 --ramdisk_offset 0x81800000 --second_offset 0x81100000 --tags_offset 0x80200100 --cmdline 'console=ttyHSL0,115200,n8 androidboot.hardware=mako lpj=67677 user_debug=31' --kernel kernel --ramdisk ramdisk.cpio.gz -o boot.img
Code:
# cp ~/android/kernel/arch/arm/boot/zImage ~/android/boot/
Repack your new boot image with your new kernel using the information from unmkbootimg
Code:
mkbootimg --base 0 --pagesize 2048 --kernel_offset 0x80208000 --ramdisk_offset 0x81800000 --second_offset 0x81100000 --tags_offset 0x80200100 --cmdline 'console=ttyHSL0,115200,n8 androidboot.hardware=mako lpj=67677 user_debug=31' --kernel zImage --ramdisk ramdisk.cpio.gz -o new_boot.img
Nore that kernel has been changed to zImage and output file has been changed new_boot.img Now it's time to test your new_boot.img by rebooting your phone into bootloader and reboot with the new img.
DO NOT FLASH THE NEW IMAGE.
fastboot boot new_boot.img NOT fastboot flash boot new_boot.img
If all has gone well your phone will now boot with your new kernel. If something has gone wrong just reboot the phone and you'll be back to where you started. If it has all worked then you can flash the new boot image and use that.

A bit more about Git
If like me, you know nothing about Git, then this bit of the guide is for you. If you have basic understanding this will be too simple for you and you'll have to skip this bit and look elsewhere. If you have a basic understanding of any version control software you won't need this either as the necessary commands to complete the next step will be self explanatory.
Jump to the next stage here
Git is a version control system. To understand what it does at a most basic level follow these steps
Code:
# mkdir git_test
# cd git_test
# git init
Tell git who you are. You don't need the inverted commas, just an email address and a name. Keep this information for when/if you open a Github account.
Code:
# git config --global user.email "[email protected]"
# git config --global user.name "Your Name"
create a text file called 'text' with a single line of text that says "This is the first line"
add this file to your git
Code:
# git add text
commit the change with a message
Code:
git commit -m "first line"
create a new branch (checkout -b both creates and makes the new branch current)
Code:
git checkout -b newbranch
edit the 'text' file by adding another line "this is the second line"
add and commit the change to git
Code:
# git add text
# git commit -m "second line"
Then examine the text file, as you might expect it looks like this
Code:
# cat text
this the first line
this is the second line
but if we now go back to the master branch and checkout THE SAME file, we get a different result
Code:
# git checkout master
cat text
this the first line
The second line is not present because it was only added to the 'newbranch' branch. This, it appears to me is the essence of git, it changes files depending on which branch you're viewing them from.
Now we're going to look at how we can use git to extract files from someone else's repository in order to get the files we want for our needs.
There are loads of guides that help you to learn more, I found this video particularly helpful.
https://www.youtube.com/watch?v=1ffBJ4sVUb4

Still to come
Modifying kernels (how I got DT2W working)
Edit:- It's going to be a while before I complete this section as although I managed to build a working kernel I'm pretty sure I didn't do it the 'right' way so I'm reading the Git Pro book.
Will be back later. .. . .

Awesome guide dude. This will surely help a lot of people

Nice
Nice guide, wish you'd have written it a week earlier
Anyways, what i'd really like to know, is how to patch the Linux version properly, because my attempts lead to break the kernel in the process. Didn't get beyond 3.4.11 :/
Hope you can help me out there, buddy.

How to create a zip ?
I have been looking into this and created a kernel a few days ago. But i want to share it.
For that ill have to create a zip. I have searched for it. I think its done using anykernel template.
The issuse is can i use the certificates in the meta-inf folder and the update-binary that is 4 years old ?
Or should i just unzip a kernel , modify the script and place my boot.img. 
 @aviz1911

Unzipping and re zipping is pretty easy, I'd do that.

@Nicknoxx How's the reading up on git going? Any tips on enabling dt2w would be much appreciated. I've been trying but can't seem to get it to work
I'm really new at the Kernel stuff and just wanted to build stock with dt2w as my first project.
Thanks for the first part of the guide

Wow nice guide sir, i'll try it later

Great Guide!
Thanks Mate!!

what all lines or links should i have to modify if i am building kernel for my device oneplus one lollipop ?
 @Nicknoxx

Also @Nicknoxx one can use the -b argument with git while cloning so git just downloads a single branch of the kernel source, this'll save bandwidth and time to some extent
Like
git clone https://android.googlesource.com/kernel/msm.git -bx kernel
Replace x with desired branch name
Click to expand...
Click to collapse
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*
---------- Post added at 08:26 PM ---------- Previous post was at 08:21 PM ----------
Droid.Riz said:
what all lines or links should i have to modify if i am building kernel for my device oneplus one lollipop ?
@Nicknoxx
Click to expand...
Click to collapse
Use the cm kernel source from github.com/CyanogenMod in git clone
Just type
git clone https://github.com/CyanogenMod/android_kernel_oneplus_msm8974 kernel
Click to expand...
Click to collapse
And for compiling
make bacon_defconfig
Click to expand...
Click to collapse
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*

KNIGHT97 said:
Also @Nicknoxx one can use the -b argument with git while cloning so git just downloads a single branch of the kernel source, this'll save bandwidth and time to some extent
Like
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*
---------- Post added at 08:26 PM ---------- Previous post was at 08:21 PM ----------
Use the cm kernel source from github.com/CyanogenMod in git clone
Just type
And for compiling
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*
Click to expand...
Click to collapse
thanks a lot for quick reply i will start it today itself @ night.
after successfully compiling i will reply here

Nice guide. I ad it to my collection. I mis the part about building the modules. For wifi and so on. I think the command is "make modules"
Maby ad some info about updating a kernel. ICS to JB. KK to LP and sow on.
How about the command to clean after building?

[email protected] said:
Nice guide. I ad it to my collection. I mis the part about building the modules. For wifi and so on. I think the command is "make modules"
Maby ad some info about updating a kernel. ICS to JB. KK to LP and sow on.
How about the command to clean after building?
Click to expand...
Click to collapse
Executing the make -j# command automatically builds your modules along with the Zimage, you'll just need to read last few lines in terminal to know the modules and where they reside
̿ ̿̿’̿’\̵͇̿̿\з==(*͡° ͜ʖ ͡°)==ε/̵͇̿̿/’̿’̿ ̿ ̿̿*

Hi guys,
How i can implement this mod/patch in my kernel??
http://forum.xda-developers.com/android/software-hacking/kernel-tap2unlock-tap2wake-feature-t2965344

[SCRIPT] Compile kernel source for the Zenwatch3

DEPRECATED because I don't have the watch anymore. Might still work, might also not. Feel free to just try and iterate on my work.
To port over TWRP, I needed a prebuilt kernel. With a little reading around the web, I managed to compile the kernel source for the Zenwatch3 from the Asus website.
Now, to make things easier for others, I created a script which handles the setup and compilation.
You can clone the script from GitHub: https://github.com/Maxr1998/asus_swift_tools
To continue, follow the instructions from the README.
Huge thanks to @joeykrim and @T10NAZ for their work in their Zenwatch2 thread, from which I got the ASUS_SW_VER fix for the Makefile and general directions.

Maxr1998 said:
To port over TWRP, I needed a prebuilt kernel. With a little reading around the web, I managed to compile the kernel source for the Zenwatch3 from the Asus website.
Now, to make things easier for others, I created a script which handles the setup and compilation.
You can clone the script from GitHub: https://github.com/Maxr1998/asus_swift_tools
To continue, follow the instructions from the README.
Huge thanks to @joeykrim and @T10NAZ for their work in their Zenwatch2 thread, from which I got the ASUS_SW_VER fix for the Makefile and general directions.
Click to expand...
Click to collapse
Thanks for the recovery and instructions.
I faces the following issue when trying to compile. Any tips to avoid this issue. thanks in advance.
drivers/staging/prima/CORE/HDD/src/wlan_hdd_assoc.c: In function 'hdd_RoamIbssIndicationHandler':
drivers/staging/prima/CORE/HDD/src/wlan_hdd_assoc.c:2170:13: warning: passing argument 3 of 'cfg80211_ibss_joined' makes pointer from integer without a cast [enabled by default]
error, forbidden warning: wlan_hdd_assoc.c:2170
/home/toffyjan/android/Test/kernel/scripts/Makefile.build:257: recipe for target 'drivers/staging/prima/CORE/HDD/src/wlan_hdd_assoc.o' failed
make[3]: *** [drivers/staging/prima/CORE/HDD/src/wlan_hdd_assoc.o] Error 1
/home/toffyjan/android/Test/kernel/scripts/Makefile.build:402: recipe for target 'drivers/staging/prima' failed
make[2]: *** [drivers/staging/prima] Error 2
/home/toffyjan/android/Test/kernel/scripts/Makefile.build:402: recipe for target 'drivers/staging' failed
make[1]: *** [drivers/staging] Error 2
Makefile:820: recipe for target 'drivers' failed
make: *** [drivers] Error 2
make: *** Waiting for unfinished jobs....
CC net/key/af_key.o
CC net/ipv6/ip6_input.o
LD net/wireless/built-in.o
LD net/built-in.o
[email protected]:~/android/Test/kernel$

janjan said:
Thanks for the recovery and instructions.
I faces the following issue when trying to compile. Any tips to avoid this issue. thanks in advance.
drivers/staging/prima/CORE/HDD/src/wlan_hdd_assoc.c: In function 'hdd_RoamIbssIndicationHandler':
drivers/staging/prima/CORE/HDD/src/wlan_hdd_assoc.c:2170:13: warning: passing argument 3 of 'cfg80211_ibss_joined' makes pointer from integer without a cast [enabled by default]
error, forbidden warning: wlan_hdd_assoc.c:2170
/home/toffyjan/android/Test/kernel/scripts/Makefile.build:257: recipe for target 'drivers/staging/prima/CORE/HDD/src/wlan_hdd_assoc.o' failed
make[3]: *** [drivers/staging/prima/CORE/HDD/src/wlan_hdd_assoc.o] Error 1
/home/toffyjan/android/Test/kernel/scripts/Makefile.build:402: recipe for target 'drivers/staging/prima' failed
make[2]: *** [drivers/staging/prima] Error 2
/home/toffyjan/android/Test/kernel/scripts/Makefile.build:402: recipe for target 'drivers/staging' failed
make[1]: *** [drivers/staging] Error 2
Makefile:820: recipe for target 'drivers' failed
make: *** [drivers] Error 2
make: *** Waiting for unfinished jobs....
CC net/key/af_key.o
CC net/ipv6/ip6_input.o
LD net/wireless/built-in.o
LD net/built-in.o
[email protected]:~/android/Test/kernel$
Click to expand...
Click to collapse
Weird. Are you using the same toolchain I use?

Maxr1998 said:
Weird. Are you using the same toolchain I use?
Click to expand...
Click to collapse
Yes I did. I using arm-eabi-4.8. I replaced the Makefile with one you linked. Then followed by.
export PATH=~/android/arm-eabi-4.8/bin:$PATH
export ARCH=arm
export SUBARCH=arm
export CROSS_COMPILE=arm-eabi-
make swift_defconfig
make -j `getconf _NPROCESSORS_ONLN`
Error due to 'drivers/staging/prima/CORE/HDD/src/wlan_hdd_assoc.o' failed anf stopped.

janjan said:
Yes I did. I using arm-eabi-4.8. I replaced the Makefile with one you linked. Then followed by.
export PATH=~/android/arm-eabi-4.8/bin:$PATH
export ARCH=arm
export SUBARCH=arm
export CROSS_COMPILE=arm-eabi-
make swift_defconfig
make -j `getconf _NPROCESSORS_ONLN`
Error due to 'drivers/staging/prima/CORE/HDD/src/wlan_hdd_assoc.o' failed anf stopped.
Click to expand...
Click to collapse
That explains it. You shouldn't replace the Makefile, but keep the default one, it gets patched with the fix automatically

Maxr1998 said:
That explains it. You shouldn't replace the Makefile, but keep the default one, it gets patched with the fix automatically
Click to expand...
Click to collapse
I can't get the patch to work. It seems it does not patched the makefile. It trying to patch but nothing happen.
~/android/Test/test111$ sudo ./build.sh
[sudo] password for toffyjan:
Welcome!
Extracting files..
Archive: WI503Q_kernel_5_8_0_54.zip
inflating: ASUS_Swift-5.8.0.54-kernel-src.tar
Press any key to continue, Ctrl + C to cancel.
Compiling kernel
Trying to patch Makefile..
--------------------------------------
I edit your script like following.
#!/bin/bash
ARCH=arm CROSS_COMPILE=/home/toffyjan/android/arm-eabi-4.8/bin/arm-eabi-
echo "Welcome!"
##################
# Setup
##################
if [ ! -d kernel ]; then
echo "Extracting files.."
unzip "WI503Q_kernel_*.zip"
tar -xf ASUS_Swift-*-kernel-src.tar
fi
echo "Press any key to continue, Ctrl + C to cancel."
read
##################
# Compile kernel
##################
echo "Compiling kernel"
cd kernel
# Patch Makefile
echo "Trying to patch Makefile.."
patch -N -r /home/toffyjan/android/Test/test111/Patch-Makefile.patch
# Exports
export ARCH=arm
export CROSS_COMPILE=/home/toffyjan/android/arm-eabi-4.8/bin/arm-eabi-
# Make
echo "Starting compilation.."
make clean
make swift_defconfig
make -j3
# Copy kernel
cp "arch/arm/boot/zImage-dtb" ../zImage-dtb
---
I can't get your point here..
OMNI_TREE="/home/max/Development/Android/TWRP" # Enter path of your Omni tree with the toolchain here ? Do I need OMNI_TREE? Is it necessary?

janjan said:
I can't get the patch to work. It seems it does not patched the makefile. It trying to patch but nothing happen.
~/android/Test/test111$ sudo ./build.sh
[sudo] password for toffyjan:
Welcome!
Extracting files..
Archive: WI503Q_kernel_5_8_0_54.zip
inflating: ASUS_Swift-5.8.0.54-kernel-src.tar
Press any key to continue, Ctrl + C to cancel.
Compiling kernel
Trying to patch Makefile..
--------------------------------------
I edit your script like following.
...
I can't get your point here..
OMNI_TREE="/home/max/Development/Android/TWRP" # Enter path of your Omni tree with the toolchain here ? Do I need OMNI_TREE? Is it necessary?
Click to expand...
Click to collapse
Does applying the patch manually from Terminal work?
You don't really need the whole omni tree for compiling the kernel, I only use it for the CROSS_COMPILE/toolchain. Maybe I'll update the script.
Btw, you normally don't need to run this with sudo.

Maxr1998 said:
Does applying the patch manually from Terminal work?
You don't really need the whole omni tree for compiling the kernel, I only use it for the CROSS_COMPILE/toolchain. Maybe I'll update the script.
Btw, you normally don't need to run this with sudo.
Click to expand...
Click to collapse
It seems it is working now at least the patch. Let me see if it finish compiling without error. I will report when it finish. Thanks. I edited like
#!/bin/bash
CROSS_COMPILE=/home/xxxxx/android/arm-eabi-4.8/bin/arm-eabi- # PLACE YOUR CROSS_COMPILE HERE
echo "Welcome!"
##################
# Setup
##################
if [ ! -d kernel ]; then
echo "Extracting files.."
unzip "WI503Q_kernel_*.zip"
tar -xf ASUS_Swift-*-kernel-src.tar
fi
echo "Press any key to continue, Ctrl + C to cancel."
read
##################
# Compile kernel
##################
echo "Compiling kernel"
cd kernel
# Patch Makefile
echo "Trying to patch Makefile.."
patch -N -r /home/xxxxx/android/asus_swift_tools-master/null Makefile ../Patch-Makefile.patch
# Exports
export PATH=~/android/arm-eabi-4.8/bin:$PATH
export ARCH=arm
export SUBARCH=arm
export CROSS_COMPILE=arm-eabi-
export CROSS_COMPILE=/home/xxxxx/android/arm-eabi-4.8/bin/arm-eabi-
# Make
echo "Starting compilation.."
make clean
make swift_defconfig
make -j `getconf _NPROCESSORS_ONLN`
# Copy kernel
cp "arch/arm/boot/zImage-dtb" ../zImage-dtb
Edit: YES It complete the compiling without any issue. Seems good. Thanks a lot. Now we need to compile a boot.img to try it out. OR maybe use AnyKernel2 Ramdisk Mod Script. The best and the safe way to try by making a boot.img and then try by fastboot boot boot.img It should not hurt the device.

Do you mind to share the stock boot.img? Thanks

janjan said:
Do you mind to share the stock boot.img? Thanks
Click to expand...
Click to collapse
I currently don't have my watch with me, but I will extract it for you tomorrow.
Don't know why my script doesn't work for you :/

Maxr1998 said:
I currently don't have my watch with me, but I will extract it for you tomorrow.
Don't know why my script doesn't work for you :/
Click to expand...
Click to collapse
Sounds good. Thank you very much. It works with a bit edit. Happy new

janjan said:
Sounds good. Thank you very much. It works with a bit edit. Happy new
Click to expand...
Click to collapse
I think that my current paths setup still needs some tweaking
Happy new year!

Maxr1998 said:
I think that my current paths setup still needs some tweaking
Happy new year!
Click to expand...
Click to collapse
We can always add tweaking afterward as long we are able to build. Really appreciate your work for script and custom recovery :good:

janjan said:
Sounds good. Thank you very much. It works with a bit edit. Happy new
Click to expand...
Click to collapse
Here you are. A little later than I wanted, but I hope it's ok

Maxr1998 said:
Here you are. A little later than I wanted, but I hope it's ok
EDIT: mirrored to Dropbox, since attachments are broken right now in XDA.
Click to expand...
Click to collapse
Thank you so much. I will play with the kernel in coming days. :good:

Hello Maxr1998.
Edit.
I tried your custom kernel. It seems everything is working fine. Backup, Restore, flash boot.img and flash zips. Great work there. Really appreciate your work. :good:

Can anyone post a quick list of what commands I would need to enter to get all the required packages/toolchain stuff? I'm fine with plugging commands in to the shell, but I don't really know what I need to get started. Was gonna give this a try to see if it fixes my problem with rebooting when I try to charge.

jobarr said:
Can anyone post a quick list of what commands I would need to enter to get all the required packages/toolchain stuff? I'm fine with plugging commands in to the shell, but I don't really know what I need to get started. Was gonna give this a try to see if it fixes my problem with rebooting when I try to charge.
Click to expand...
Click to collapse
I will upload my kernel soon. Need to upload the source first. You can try my build if you want.

janjan said:
I will upload my kernel soon. Need to upload the source first. You can try my build if you want.
Click to expand...
Click to collapse
Really looking forward to it!
I am quite interested in what the tweaks/changes are

Maxr1998 said:
Really looking forward to it!
I am quite interested in what the tweaks/changes are
Click to expand...
Click to collapse
Nothing so much now. I will add tweaks later. I disabled dm-verity and forced encryption. Possibility to modify system partition and ability to add BusyBox and SuperSu. I will play with other tweaks later. I am a bit busy with exams etc. Did you also build a kernel ?