I replaced the screen on my phone myself but somehow i lost the little flap that goes over the touchscreen connector, does anyone know where i could find a replacement piece for that? Or if there is something else i might be able to substitute for that?
illa215 said:
I replaced the screen on my phone myself but somehow i lost the little flap that goes over the touchscreen connector, does anyone know where i could find a replacement piece for that? Or if there is something else i might be able to substitute for that?
Click to expand...
Click to collapse
I have no clue, but chances are it is some kind of insulator, could you not make something out of paper or card?
And your subject says response problem? Try a screen calibration.
Yea i tried a screen calibration but it always fails though. I was thinking about trying a card or something but i didnt know if it would be safe to use tape on that part of the phone, i might have to send it to Dell
Why start two threads on the same issue? and this one is in the wrong forum.
Because my computer was messing up so i wasnt even sure if this one even posted, is it really bothering u that much?
Yes, it bothers us that much.
Sent from my Dell Streak using XDA App
I have a question about the screen... I have a big problem with it...
So my battery often runs empty. So I need to charge at several places - at the computer, in bed, in my girlfriends house.. so i bought some usb-cables for the streak... and some usb ac adaptors, like for iphone, with 12V and 1000 mah output.
So, now the problem: The cables aren'T original, but they work great. When i charge the phone with the original charger and a faked cable, also no problem. But if i use any cable with a non-original ac-usb adaptor, the screen bekomes unusable. if you want to delete a letter in a sms than, you write a m and a b und strange words, i can see the swype-line doing what it wants. same on homescreen, cant press the right icons. if i unplug the charger, everythin works fine again. i also compared the data of the original dell charger and the alternative one, same output and mah-number....
Have you ever heard of this problem?
And most important, do you know how to solve it? (please don't tell me to buy an original charger, i dont want to wast 40 € for this....
Yes, same problem with Wagan Home/Car ac/dc charger ONLY when AC charging. Probably isn't good for device, but I've never had any battery problems. Screen issues go away as soon as charger is unplugged. I just don't use the device screen when it is on that charger AC only. Works fine in car (DC).
Okay, I won't tell you that the only way to avoid it is to use the Dell factory charger (but it is)
kraz
Well, it is not, just tried the ac adaptor from my sister, worked fine
That screen behavior is caused by unfiltered output of adaptor (china, is it?).
Can be at least partially solved by using a ferrite ring or USB cable that already has one.
For example:
http://www.dataq.com/products/hardware/accessories/fc.htm
for this orice, i can also buy a new adaptor and hope that this helps
but thanks for the info
(and no, it's from great britain, but made in china )
RadioShack part #273-0067 2/bag $3.19. I realize most recent poster is from UK. This info is for anyone in USA having the same problem. One on each end of usb cable gets rid of 85-90% of interference, and makes screen usable while charging with non-original (Wagan) charger.
kraz
RadioShack part #273-0067
I replaced the screen on my dell streak myself but somehow i lost the little flap that goes over the touchscreen connector , it has 6 pins
And its call ribbon connector i thing?
can anyone help me find this part
i appriciate it
thanks
i had the same problem. I cut a tiny piece of a business card (make sure its a sturdy one though and not regular paper). Place the cut piece over the connector but under those gold pins. works just fine now
joelk said:
I replaced the screen on my dell streak myself but somehow i lost the little flap that goes over the touchscreen connector , it has 6 pins
And its call ribbon connector i thing?
can anyone help me find this part
i appriciate it
thanks
Click to expand...
Click to collapse
Try with "dellstreakrepairs.co.uk"
Related
has anyone seen an xperia cradle for sale ? i prefer having my phone sitting in the cradle whilst at work so that i can see the calendar / appointments, etc.
i realise the fact that the mini usb port being on the side means that it's unlikely that the phone can be charged whilst it's in the cradle ...
has anyone spotted one ?
Haven't seen one. I'd also like this and it would be great if you could have an alarm clock similar to the new Blackberry Storm as seen in the link below.
http://blogs.eveningsun.com/AC/2008/10/blackberry_storm.html
I found a link to this one over at xperiax1.net
Cradle + extra battery charger
good spot !
really ugly though with the loose usb cable hanging out.
Has anyone seen something with a solid usb connector (i. e. side frame with connector on it to push the phone agains)?
I want something where I can just push/slide/drop/whatever the phone in with one hand and have it connected, and just pull it back out to get it back!
downloadtest82 said:
really ugly though with the loose usb cable hanging out.
Has anyone seen something with a solid usb connector (i. e. side frame with connector on it to push the phone agains)?
I want something where I can just push/slide/drop/whatever the phone in with one hand and have it connected, and just pull it back out to get it back!
Click to expand...
Click to collapse
Yeah, I'm worried that with the position of the USB connector that it might not make cradle manufacturer's life easy for this phone. Is there president for a phone with a jack on the upper-side having a plug-and-charge cradle made for it?
I need to have a phone that can have a charge/stand that clicks right in.
i ended up buying the one in the link above. it's pretty lame if i'm honest but it's better than nothing ...
i can't see how any design is going to allow anyone to just grab the phone and remove it without having to wrestle with a connector at the side of the phone. annoyingly, there is only one input which (obviously) is the sync cable meaning that it's charged via my usb port rather than the mains (i.e it takes forever to charge ...)
we bought two of them, one is working one not. So we ordered directly by the manufacturer obo Hongkong and they arrieved yesterday. Both do not work! No connection to the PC! Error messages!
Hi guys,
I too was very suprised with the fact that I couldn't find any cradle which has a (as you call it) plug-in connection.
Enough reason for my to design and build one myself. I'm still in a very early stage of building, but I was wondering what would a cradle like that be worth for you guys, just to check if it would be furthwhile the make more than just one for myself.
They should just make a horizontal/landscape cradle that you slide out the keyboard and dock it like an UMPC. Honestly the vertical cradle looks hedious.
edit: just realized that's what the bb storm has. there you go.
mrdo said:
has anyone seen an xperia cradle for sale ? i prefer having my phone sitting in the cradle whilst at work so that i can see the calendar / appointments, etc.
i realise the fact that the mini usb port being on the side means that it's unlikely that the phone can be charged whilst it's in the cradle ...
has anyone spotted one ?
Click to expand...
Click to collapse
http://www.mobilefun.co.uk/product/17827.htm
Sorry for the repetition.
I'm with outie. The vertical docks look cheap and lame and don't show the X1 off to it's best, nor do they allow you to use phone the way it was intended.
We need a horizontal cradle that it can sit in with keyboard open like a real desk organiser. Hell, it even looks like Sony could have planned it that way by putting the sync connector on the bottom of the keyboard!
Got one directly from Brando (with spare battery). However it sucks ass. There are several kinds made by some OEM and it differs in number of ports. The Brando one has just one miniUSB input and the adapter just gives 1A. So you can only charge OR sync. So bit useless, as charging phone and battery through USB will take forever and charging phone and/or battery with that adapter would take also significantly longer, than the original CMU-20 and you cannot sync.
I saw one with two ports so you can sync and charge from your socket.. Wonder if mine can be opened and if it has also two ports, just hidden.
But hey, what do you want for 20USD?
For a few days my phone hasn't been charging, and at first I thought it was a problem with the battery, but having bought a new one I've realised that when I tilted the charger to the left it would charge, but when it's just left it wouldn't, so I guess a bit of a miss-alignment.
Anyone got any ideas how I can fix this problem?
Cheers, nathaniel
try another cable and make sure it's the one that came with the phone. you should have a usb one and a ac adapter. if both are like that then you need to warranty it out.
Yeah, Ive tried it with the USB cable and the charger, I got the same result. Is there no quick fix, I'm going abroad in 9 days and quite need my phone...
There are a few discussions on bad USB connectors in these forums -- searching might provide some things to try.
From what I can remember, it's possible the pins in the connector (on the phone side) might be bent out of place -- you might want to inspect them with a magnifying glass and try to carefully bend them back if any seem out of place.
It's also possible that the connector itself is broken -- in which case you're looking at a service call.
this seems like the problem i faced. i was also facing the same problem and i read the forums here and found it as a usb port issue. so i slightly bent the usb port so that the contacts are aligned and then it started charging
Hey I would also recommend trying a new a new charger again because I have had my share of faulty chargers. Last time I had a problem charging was with a brand new cable that did not work right at the box from At&T and thought it was my battery until i tried another charger that worked. I would suggest trying the charger that is not working on another phone and see if its actually the charger or if it is your phone that is not working.
burtcom said:
There are a few discussions on bad USB connectors in these forums -- searching might provide some things to try.
From what I can remember, it's possible the pins in the connector (on the phone side) might be bent out of place -- you might want to inspect them with a magnifying glass and try to carefully bend them back if any seem out of place.
It's also possible that the connector itself is broken -- in which case you're looking at a service call.
Click to expand...
Click to collapse
I think it is to do with the pins in the connector.
I had a search but I'm not very good on forums and I can't find anything of any use. Does anyone have a link?
Just look at the last few pages of topics, you should find something... there are threads about broken USB at least once a week.
One common conclusion is to avoid using USB cables other than the supplied one as their
plugs are a little thicker and tend to deform the phone's plug over time (I admit I always use others though, and as a result do sometimes need to wiggle the cable a tad and not move anything anymore once the connection is established... ).
I once dismounted my Hermes and tightened the plug back a bit, it helped, I've never done it with my Kaiser yet though. If you're not used to dismantling and fixing devices I'd recommend returning it for repair indeed.
I had a the opposite happen, it would charge but no data connection with my pc. If you look at your extUSB port on your phone, see if the black plastic tab is cracked (which was my case) or if the pins are shifted. whatever the issue, its obviously hardware related, take it to an At&t service center tell them whats wrong and if your in warranty they'll change it on the spot.
gonzo8898 said:
Hey I would also recommend trying a new a new charger again because I have had my share of faulty chargers. Last time I had a problem charging was with a brand new cable that did not work right at the box from At&T and thought it was my battery until i tried another charger that worked. I would suggest trying the charger that is not working on another phone and see if its actually the charger or if it is your phone that is not working.
Click to expand...
Click to collapse
He got the same result using his USB cable so that would rule out the charger.
fone_fanatic said:
I had a the opposite happen, it would charge but no data connection with my pc. If you look at your extUSB port on your phone, see if the black plastic tab is cracked (which was my case) or if the pins are shifted. whatever the issue, its obviously hardware related, take it to an At&t service center tell them whats wrong and if your in warranty they'll change it on the spot.
He got the same result using his USB cable so that would rule out the charger.
Click to expand...
Click to collapse
Im in England, took it to the T-Mobile shop, the service was rubish and without even looking at it they send I should send it off which would take 2 weeks. There is a crack in the black plastic tab
hi everyone, my tilt use to charge with a car charger but lastnight my battery was about dead and i tryed using my car charger and nothing happened. i found something like this on here once before but am unable to find it now. so please if anyone know of a fix or knows were the thread is please point me in the right direction. sorry for this being a repeat thread but im in need of some help. oh the phone does still charge with the wall charger and the computer but just not the car charger! thanx in advance
-John
It could be a lot of things the charger or the socket in the car to me it points more to wards that are as it is still charging normally
lufc said:
It could be a lot of things the charger or the socket in the car to me it points more to wards that are as it is still charging normally
Click to expand...
Click to collapse
thank you for responding, but i used 2 different chargers in 2 different cars. the car sockets are workin fine for other phones, radar, and nav unit just not my phone. is there something in the registry maybe?!?
blitz69 said:
thank you for responding, but i used 2 different chargers in 2 different cars. the car sockets are workin fine for other phones, radar, and nav unit just not my phone. is there something in the registry maybe?!?
Click to expand...
Click to collapse
Looks like its the charger not being man enough look at this thread its got your answer
http://forum.xda-developers.com/showthread.php?t=277742
lufc said:
Looks like its the charger not being man enough look at this thread its got your answer
http://forum.xda-developers.com/showthread.php?t=277742
Click to expand...
Click to collapse
thank you again for the response but my issue isnt anything that is covered in the thread u sent me. well in a way it is but it isnt. my phone USE TO CHARGER with any charger that had the mini usb and now it doesnt. the thread u sent had some great pointers on how to fix it with soft resets while it was plugged in, or try to charge it while phone is off. none of these seem to work and im running out of options on how to fix this. but thanx again for all ur help and advise.
-John
blitz69 said:
thank you again for the response but my issue isnt anything that is covered in the thread u sent me. well in a way it is but it isnt. my phone USE TO CHARGER with any charger that had the mini usb and now it doesnt. the thread u sent had some great pointers on how to fix it with soft resets while it was plugged in, or try to charge it while phone is off. none of these seem to work and im running out of options on how to fix this. but thanx again for all ur help and advise.
-John
Click to expand...
Click to collapse
I recently had the exact same problem as you and got extremely frustrated since every car charger at every store didn't work. I bought one that said it was compatible with the tilt the other day, but when I tried it in the car it didn't work. I figured at this point it was definately my phone being either a hardware issue or a physical issue. I got on the forum and through many searches I found this:
http://forum.xda-developers.com/showthread.php?t=406771&page=3
Basically, my 5th pin inside the USB connector came out of allignment and wouldn't charge via car charger. It would work with the headphone adapter with the charger connected through there and then held tightly to the phone. This verified something was loose in the USB port. So what I did was:
1) Turn off the phone (**Very important to make sure nothing shorts out)
2) Take a small flat screw driver or other flat object and carefully push the 5th outer pin (on the right when looking at the phone resting with the screen side up) and level it with the other pins. (*** BE VERY CAREFUL SO YOU DON'T BREAK THE USB CONNECTOR MORE SINCE IT CAN BE VERY FRAGILE WITH TOO MUCH FORCE!!)
3)Test it out (YAY it works!!)
This worked for me and now I am happily enjoying my car charger with no issues. Activesync is also working better by not hanging on calender items. Hope this helps you solve your issue so you don't need to send it in to AT&T.
NAV charger
maybe it is mechanical.
but i have very similar obsrvations actually throuout my history of htc devices. they would "suddenly" stop charging thru non standard chargers.
the same happened to me with my tytn2 and a regulaar usb car charger...charged fine until one day it wouldn't anymore.
Although i have no technical explanation as to what happens in the device to cause such a change in "attitude", i figured a "stronger" charger could maybe help and purchased a USB charger designed for (i think) Navigon GPS devices. The charger is larger and obviously stronger and has been working for half a year now reliably, while all others wouldn't.
Andy.
Hello, I have could this problem is happening to other people but. Haven't could a solution for it.
Whenvi Plugg my galaxy into the charger the touch screen either doesn't respond or pressing in a spot I haven't pressed. I think this problem is because the screen is capacitive but this doesn't happen at all with my ipod touch.
This makes the phone impossible to work with with while its plugged in
Any solution for this?
it might be defective
or simply it needs to be re-calibrated
mine doesn't do it
but i have read on the forum many people had the same problem as you do
they either took it back for warranty or got it fixed some how
i think it should work as soon as you recalibrate the touch screen when it's plugged in
How do I calibrate it?
Are you not using the original charger?
I'm getting this too, with the original charger, but not with a usb charger.
Seems to be related: http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=700612
And this: http://ip208-100-42-21.static.xda-developers.com/showthread.php?t=673330
Happens with my brothers I9000 too! D:
On mine if I'm not TOUCHING the phone case or it's charging the touchscreen gives unreliable input.
90% of the time this isn't a problem because I have to hold the phone in order to use it.
Sorry to dig up an old thread, but I just got this phone and I am having the exact same problem. Using either the original charger or an apple ipod charger I have the same issue. It also happens on the original ROM and on Darky's. It works fine while it's plugged into a computer and charging though.
Has anyone been able to remedy this problem without sending it in for warranty repair?
hi, i get this too, only happens when plugged in.
anyone find a fix?
ok, i kinda found it out.
Its because the charger being used isnt properly grounded or something which means there is a small electrical charge being picked up the screen which causes the screen to jump about. Doesnt happen when the phone isnt plugged in or when its being charged via micro usb connected to my laptop so I think the charger is to blame not software
according to someone else its because of
It will be high-frequency noise on the DC output voltage of the charger. Chargers use a high-frequency DC-DC converter method and the cheaper ones don't do a very good job of filtering the high frequency out of the DC at the other end. This noise enters your phone and plays havoc with the sensitive circuits in the capacitive touchscreen.
It is nothing to do with grounding of the input side of the power supply; when you ground the output side (the USB plug) with your hand, your body capacitance filters out some/all of the noise.
but anyway at the end of the day its still a fault with the charger whatever the technical details maybe.
Is there a charger out there that will not experience these problems?
sk1d said:
Is there a charger out there that will not experience these problems?
Click to expand...
Click to collapse
I have the same problem with the original charger. But by using the charger that came with my logitech mouse, I have eliminated the screens erratic behaviour while charging. The original charger is collecting dust now.
gammalerik said:
I have the same problem with the original charger. But by using the charger that came with my logitech mouse, I have eliminated the screens erratic behaviour while charging. The original charger is collecting dust now.
Click to expand...
Click to collapse
Could you post some details about your charger? 2/3 Pin? voltage? amperage? Input/output amounts? etc...
sk1d said:
Could you post some details about your charger? 2/3 Pin? voltage? amperage? Input/output amounts? etc...
Click to expand...
Click to collapse
The wall-charger has an output of 5V, 1A. Input is 100-240V, 50/60Hz, 180mA. Looks like 3-pins. It came bundeled with my Logitech G700. Also, when I plug the phone in, I get those three choices you usually get when charging from a pc: "Kies-mode", "mass storage" etc. I just press return on my phone when I see this. So it seems as if this charger is a bit more advanced with some kind of chip in it. Perhaps any Logitech/Microsoft-charger will do.
gammalerik said:
Looks like 3-pins.
Click to expand...
Click to collapse
Pin was the wrong word, I meant prongs. Does it have two or three that go into the wall socket? The third being the grounding wire.
I have a charger for my bluetooth headset but it only outputs 550mA. Is that enough to charge the phone. The original is 700mA.
Hi,
I have this strange problem happening since yesterday on my brand new Salsa. When I put it on charging and leave it on a wooden table, the touch screen responds weird to my touch. The ring lock will not open all the way or shortcuts will work weird. The soft keys at the bottom too go absurd not responding or giving different options.
If I pick the handset (probably providing grounding), everything works normal thereafter. I'm using only the original charger provided with handset.
Additionally even the sound into my car's auxillary port is behaving as weird filtering or dimming the vocal frequencies but allowing the music to get through.
Does anyone know why this is happening?
Only incident to have caused this I guess is when the sales guy I went to plugged the phone onto a blackberry charger yesterday for a few seconds.
Could it have caused some damage to some internal part - diode or something that is leaking AC voltage onto the capacitive screen ? Can I have it repaired at HTC ?
Since it's not even a week old, I'm too distressed about the weirdness. PLEASE HELP!
does seem like it could of done some damage as blackberry's do take a lot more juice than the salsa, personally i would take it back and tell them about the problems you have had only since the dude abused the phone lol
I will surely be taking it back but want to confirm if its the problem with the phone or charger, because I do not see this problem when I charge from my laptops USB.
And I want to know what it is before I take it to them. Its much safer to find the problem and tell them rather than allowing them to figure it out themselves and in turn damage something else.
Thanks
your laptop will deal 5v 1a max before the computer will cut off the usb supply due to risk of overload, new blackberry chargers deal a lot more than that due to the juice the device needs to charge, almost like different laptop chargers the difference in the supply would kill your laptop, i don't have any problems with my device regardless of surface it is resting on.
I have the same problem
I have the same problem, but it was observed from the time of purchase. So do not worry and take the phone in hand))
Resolved
With some searching I resolved this problem or I can say I at least know why this is happening.
It is the charger that is faulty and not the handset. I changed it with another HTC charger I had and the problem disappeared. I figured the most logical explanation is what I read in one of the post elsewhere in this forum.
The charger could be faulty to be leaking some AC voltage along with the charging DC juice. This leaked voltage interferes with the sensitive capacitive touch screen. If we hold the handset in hand, we are providing a natural grounding and hence the problem disappears.
I personally would not like this to continue and so I'm going to take it back to my vendor for replacing the charger or if the need be, buy a new one.
Akinawa32 said:
I have the same problem, but it was observed from the time of purchase. So do not worry and take the phone in hand))
Click to expand...
Click to collapse
Try using another charger and see the difference. Hope you can get your charger repaired or replaced!
Take care.
this is due to a grounding problem or/and leaked ac current....
This problem occurs when your charger supplies more power than required by the phone to charge.The only solution for your prolem is changing your charger.
Sent from my HTC Salsa C510e using xda premium
I had once another problem, that my Salsa overheated (red-green blinking) when I charged it and my Wifi was on. Maybe a background-process could be responsible.