[Q] E:Failed to mount /sdcard (File Exists)... help - Captivate Q&A, Help & Troubleshooting

I think I've tried everything except what I need to do. Anyway, here's the problem.
I was on MIUI 1.7.29 I believe, when all of a sudden, I restarted my phone, and my internal SD card was "blank." I restarted it one more time, and it solved the problem, or so it seemed.
Next time I rebooted my phone, my SD card was "blank" and I couldn't mount it for the life of me. I read somewhere that this may happen if you don't come from the stock ROM, which I came from Cog5v1, so I decided to flash back to the "I897UCJF6-final-OCD-REV0" which I've had on my computer since I've owned my Captivate and re-do my MIUI ROM.
So, I flash that, and everything seems fine, until all the splash screens stop. Then my phone just sits at a black screen with the touch buttons lit up.
Now from here, I've had a few phone problems in my day that have been solved with a download jig, so I find my jig and flash a different Kernel on to get CWM up and format my internal SD card that way, but anytime I flash another Kernal and boot into recovery, I get the "E:failed to mount /sdcard (File Exists)" error, in the default recovery screen.
I've even flashed the .tar that should force conversion back to rfs format.
And here's another kicker, I can't seem to get the phone recognized by adb at any point in the process, so I can't even manually do it! Please help me figure this out.
Let me know if there is any other information you need, and keep in mind, I'm not new at this and I'm not afraid to do anything crazy.

After those kernel flashes are you able to boot into android?
If so have you turned on usb debugging and tried a master clear with odin one click?

studacris said:
After those kernel flashes are you able to boot into android?
If so have you turned on usb debugging and tried a master clear with odin one click?
Click to expand...
Click to collapse
Steckums said:
So, I flash that, and everything seems fine, until all the splash screens stop. Then my phone just sits at a black screen with the touch buttons lit up.
Click to expand...
Click to collapse
I've not been able to get my phone to boot on any kernel, because /sdcard is "corrupted", and I can't install a rom via CWM, since I can't boot into CWM since /sdcard is "corrupted."

Try pulling your sim and booting

Time_Zone said:
Try pulling your sim and booting
Click to expand...
Click to collapse
I've flashed different kernels and attempted to boot into stock or CWM with every combination of external SD and SIM card in or out.

I have the same problem, but nothing seems to correct it. Please tell me if you find the solution, i'll do the same.

michaelsucno said:
I have the same problem, but nothing seems to correct it. Please tell me if you find the solution, i'll do the same.
Click to expand...
Click to collapse
Happened to me twice. You have to send your phone in to get it fixed. Your partition tables are probably screwed like mine were.
Sent from my I897 using xda premium

How much does it cost? Its gonna be a problem for me anyway since I live in Peru and bought the cellphone in Vancouver...

Did they tell you if they had to change the sdcard or the took it out and restore it?

Mobiletechvideos can possibly do it.
But I assume that you could restore a DD backup of partitions to resolve this.
Sent from my unbrickable cappy *bam*

Use one click to flash back to J6 and it should fix your problem. I had the exact same problem after I went to miui while I still had speedups kernel installed. I tried everything I could think of and this fixed it.
Sent from my SGH-I897 using XDA App

could you give me the link where you found odin with j6? I been looking everywhere for it.

http://forum.xda-developers.com/showthread.php?p=7287634

In the other forum...u said you already flashed sstock with one click Odin...I'm confused
michaelsucno said:
could you give me the link where you found odin with j6? I been looking everywhere for it.
Click to expand...
Click to collapse
Sent from my unbrickable cappy *bam*

michaelsucno said:
Yes, I tried odin and heimdall one click versions, but both have the same problem mounting the sd
Click to expand...
Click to collapse
Sent from my unbrickable cappy *bam*

Yes, but it had another version of stock rom, I though j6 is the older version. Probably i'm the one confused because I'm new to android devices.

michaelsucno said:
Yes, but it had another version of stock rom, I though j6 is the older version. Probably i'm the one confused because I'm new to android devices.
Click to expand...
Click to collapse
I would like to try to go back to 2.1 or 2.2, because 2.3 has a different partition file.

J6 is the original 2.1. It should fix your problem. You may have to do the 3-button fix afterwards though. I did.

How do I apply that fix?

bulletproof1013 said:
Sent from my unbrickable cappy *bam*
Click to expand...
Click to collapse
Iiql
Sent from my PG86100 using XDA Appx oqcu

Related

[Q] internal SD problem?

Hey guys, i need some help, its rather urgent.
I was trying to do a lag fix. It said it didn't work, and proceeded to restart.
went to the i9000 screen for 3 second, and just kept restating. can't get into recovery anymore. i got into download mode, and tried to flash back to stock with odin. odin said everything worked, but its still stuck in the same boot screen loop.
Any ideas? Is it the internal SD card? It is a bell i9000.
Thank you in advance.
Most dedinately the infamous corrupt SD issue. You're on 2.2 which is why it loops at the i9000m screen. If you flash 2.1 it will get to the glowing s screen then the screen will go black and it will stay like that.
You need to take it in for repair. There are many threads on this issue and other user experiences with the repair process
Sent from my GT-I9000 using XDA App
hello..you can search for EUGENE373_SamsungS_Froyo_PDA and download it then flash it with odin untill it finish then download any stom room you need.....i have the same problem befor and i tried so many ways but nothing untill i got that eugene373 rom and it formated my sd card and everything is ok try it
Anyone try the above post? Does it work out for anyone else?
Ok Thx, trying it out right now
Hisho2050 said:
hello..you can search for EUGENE373_SamsungS_Froyo_PDA and download it then flash it with odin untill it finish then download any stom room you need.....i have the same problem befor and i tried so many ways but nothing untill i got that eugene373 rom and it formated my sd card and everything is ok try it
Click to expand...
Click to collapse
I just tried it. Didn't work I guess I have to send in for repair.
13a said:
I just tried it. Didn't work I guess I have to send in for repair.
Click to expand...
Click to collapse
what exactly are the symptoms? becasue it sounds simlar to what happened to mine and i managed to fix it.
Rumble6059 said:
what exactly are the symptoms? becasue it sounds simlar to what happened to mine and i managed to fix it.
Click to expand...
Click to collapse
well, i was on a 2.2 rom. and i had just reflashed, because i was starting to get a lot of force close errors. So i reflashed. all went well. when i went to do the lag fix, it said, can't find file ( don't remmber what its called, something like bh1h1.. something like that.. which most posts say is SD card failure) then went to reboot. it shows the GALAXY S i9000 screen, then reboots again. i can;t get into recovery anymore. i can get into download mode. i try flashing with odin Odin says everything is flashed and that it worked, giving me no errors, but the phone is still stuck in the same boot loop. Thx for the help.
13a said:
well, i was on a 2.2 rom. and i had just reflashed, because i was starting to get a lot of force close errors. So i reflashed. all went well. when i went to do the lag fix, it said, can't find file ( don't remmber what its called, something like bh1h1.. something like that.. which most posts say is SD card failure) then went to reboot. it shows the GALAXY S i9000 screen, then reboots again. i can;t get into recovery anymore. i can get into download mode. i try flashing with odin Odin says everything is flashed and that it worked, giving me no errors, but the phone is still stuck in the same boot loop. Thx for the help.
Click to expand...
Click to collapse
have you tried re-flashing through Odin with a 512 pit, phone, modem and CSC file with re-partition checked? thats what i did. with JF2 files. the using kies reg hack did official update to JPY.
Matt
No, I have not. I will give it a try tonigt with the re partition. Thx.for the suggestion.
Sent from my SGH-I897 using XDA App
Rumble6059 said:
have you tried re-flashing through Odin with a 512 pit, phone, modem and CSC file with re-partition checked? thats what i did. with JF2 files. the using kies reg hack did official update to JPY.
Matt
Click to expand...
Click to collapse
Just tried it. didn't work. Thx tho.

[Q] SS AT&T Captivate stuck on ATT Splash Screen

Hi, I have a SS/ATT Galaxy S. It was working fine. I made the mistake of running an update to change the ATT splash screen. The device boots to the ATT splash screens and stays there. You can hear the SS start up sounds as though the unit booted ok.
I've tried various Odins they all hang on file analysis. I've tried using different computers per the recommendations in the various threads. I've tried many of the one click and also separate file updaters. They all hang on file analysis.
I am able to use Droid explorer to view the device. I've also put a new update.zip on an sd card but nothing seems to change the splash screen.
I'm not sure how to tell what version the unit is currently on.
I can get to the 3 button state. It says Android System recovery <2e>.
I have the options to reboot, reinstall packages, delete all user data and delete cache data. I've tried each of them, no change.
I have tried to read many threads before bothering anyone. Your input would be appreciated.
Thanks
if you have the update.zip on your phone, in the root of your SD card.. then from 2eRecovery, select reinstall packages.. may have to do it twice. That will boot your phone into clockworkmod recovery.. and from there you should be able to mount storage- put a ROM on your device, flash and be good to go.
Reply to thread
Hi, Thanks for the fast response. I've tried update.zip on both an sd card and also via droid explorer, about 5 times. If I reboot, same thing, the ATT splash is there, and the Galaxy boot sound. I can get into recovery and droid explorer works. If I try Odin it hangs on file analysis. Anything else I can try? Thanks again.
Are you in dl mode when you try this, or recovery?
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Delphin9 said:
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Click to expand...
Click to collapse
If you can get to dl mode try using AIO Captivate to flash back to stock 2.1. I've had success as I flashed with the partition checked and had to go all the way back using ODIN contained in the AIO Captivate program. Found here
Delphin9 said:
The phone is now bricked. I was in recovery mode as I saw the 3 button posts on holding the up/down and pwr. I just tried it with dl mode and odin3 and bricked it.(based on another forum's input to check repartition I think). Now it won't boot at all but I'm still able to get to dl mode but not sure what to run to fully recover.
Click to expand...
Click to collapse
Yeah if you can get into download mode than you are not bricked. I would Odin or Heim back to JF6 and go from there. What happened when you tried reinstalling packages from 2e? I know you said everytime you reboot- but what did it say when selected reinstall packages?
Sent from my SGH-I897 using XDA Premium App
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Delphin9 said:
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Click to expand...
Click to collapse
Great.. glad to hear it
Sent from my SGH-I897 using XDA Premium App
Delphin9 said:
I'm back to 2.1, baseband I897UCJF6, Kernal 2.6.69, Eclair. Thanks to everyone for your very kind help. Much appreciated.
Click to expand...
Click to collapse
Now on to some real ROM flashing!! Glad you got it working. I did almost the same thing and was sweating bullets.
Yeah, it was quite scary. I actually purchased some 100k resistors on Ebay but didn't need to make the jig.
Can you recommend a good set of f/w to load? Is it worth it to move to 2.3?
Cheers...
Delphin9 said:
Yeah, it was quite scary. I actually purchased some 100k resistors on Ebay but didn't need to make the jig.
Can you recommend a good set of f/w to load? Is it worth it to move to 2.3?
Cheers...
Click to expand...
Click to collapse
Of course it is worthed it to move to 2.3 I mean, it comes with so many more features and is running just perfect as a everyday rom. You shouldn't be disapointed
Sent from my Mosaic powered I896 using Tapatalk
But, just in case, out wouldn't hurt to have a proper jig laying around. I'm just saying...
mrhaley30705 said:
But, just in case, out wouldn't hurt to have a proper jig laying around. I'm just saying...
Click to expand...
Click to collapse
+1.
I had to make a jig when I soft bricked it. Not fun. Since then I purchased one and am glad I did.
Well, that means I won't have wasted my $2.00.
I saw this and thought it worth to try. http://www.youtube.com/watch?v=D0aoabVtPJ8
In your footer, it says you're using mosaic.
e.g. ROM: Mosaic III, ¤Kernel: Xcal's #14, ¤Modem: JK4, ¤Launcher: ADW Ex
Can you point me to the correct files/process? I guess I'm scared of screwing it up again. when I look on the forum there's almost too much info for a noob to choose which is best. Cheers...

Boot Loop - Tab dead?!?!?

Tab is running CWM Recovery and Gingerbread Overcome Rom beta 1. Has been running fine for 3/4 days. Yesterday the tab froze and rebooted twice. Tab was left on last night while on charge. This morning when I unplugged the tab it was off, so I switched it on but it is stuck in aboot loop. The Galaxy Tab Samsung screen displays but then just reboots.
I can get in Recovery and have performed a data wipe and cache wipe, made no difference.
I made a CW backup on Tuesday and checked afetr that it was on the sdcard, it was. However if I now try and do a restore from CW it claims there is no backup...
Is my tab dead? Is my internal memory dead?
I'm comlpetely lost now....
Can you get to the flash zip option in recovery? If you can try to reflash the ROM from the SD card. Have to tried starting over using Odin? Hope this helps. Good luck.
I can get to the flash zip but they are not there? This is whats making me think maybe there is an issue with the internal memory?? The tab has been freezing and rebooting at least once a day for the past 2 weeks or so?
Haven't tried the odin route yet, will give that a go tonight
If you wiped everything then yes, that will delete your internal memory.
Follow the Overcome guide to use Odin and restock to the GB safe rom, then go back to Overcome.
| Don't Revive Me Bro! |
GANJDROID said:
If you wiped everything then yes, that will delete your internal memory.
| Don't Revive Me Bro! |
Click to expand...
Click to collapse
Ah, my Avatar is quite fitting at this point........
Thanks. Will follow the guide again tonight
kevstv said:
Ah, my Avatar is quite fitting at this point........
Thanks. Will follow the guide again tonight
Click to expand...
Click to collapse
Haha, itbis
All youll need is:
Odin 1.7
P1_hidden.pit
GB-stocksafe.zip (i think thats what its called)
And the Obercome beta rom.
Hope it works out well for you.
| Don't Revive Me Bro! |
this also happened to my tab (because i was playing around with my system files) i just reflashed the ROM and it was fixed, dont worry about it being bricked as long as you can still access CWM and download mode
hopefully you backed up
good luck! hope you get it fixed!
Think I could be in trouble. Followed the odin steps and got a big Red fail on Completing (Write) - Fail
Now whenever i turn it on all I have is a phone icon with a broken line going to a pc icon, cant even get into recovery!
Just flash dbdata. Don't worry, it's not bricked if you can still power it on and odin recognise it.
Sent from my GT-P1000 using XDA App
kevstv said:
Think I could be in trouble. Followed the odin steps and got a big Red fail on Completing (Write) - Fail
Now whenever i turn it on all I have is a phone icon with a broken line going to a pc icon, cant even get into recovery!
Click to expand...
Click to collapse
Thats alternative download mode. Try again
DarkPal said:
Thats alternative download mode. Try again
Click to expand...
Click to collapse
Try what again? I've tried switching off and on again several times? Do you mean try the odin steps again? If so I have twice and both times ended with the same Fail. I am really starting to think there is a serious issue with my internal memory...
aibo said:
Just flash dbdata. Don't worry, it's not bricked if you can still power it on and odin recognise it.
Sent from my GT-P1000 using XDA App
Click to expand...
Click to collapse
Thanks but I'm fairly new to this, could you expand a little please. Thanks
There is a dbdata.tar file somewhere on roto rom's thread or chainfire's gingerbread rom. If it's a zip, extract it beforz. Flash it as pda.
Sent from my GT-P1000 using XDA App
I've had random reboots running a few different roms. It sucks and it does require a complete wipe. I end up going back to heimdall and reflashing all vzw images. Then I'm on a clean path to a fresh start.
Tbolt meatclaws-talkatap
Tab won't even switch on to alternative mode now other than when it's plugged into the wall socket power charger!?!?
Anyone able to offer an help? The tab will not boot unless it's plugged in charger, so when plugged into pc/laptop will not boot so I can't get to download mode..
Have managed to get it to switch on now but still getting the write failed when trying to flash the PDA. Have tried the GB Stock Safe and have tried the official samsung, both fail. This really does sound like an internal memory issue to me as everything seems to work fine until itgoes to write to the memory, does that sound feasible or am I just panicking?
One piece of advise...make sure that your battery is fully charged before you start anything....like if you plug it in will it show it charging...because if you start messing around with Odin or flashing and it dies from lack of power....then you will be SOL....I just had to send two into Samsung in the U.K. to get them flashed back to normal....but followed the Overcome rom instructions and both now have 2.3.3 android...Good luck!
1Brite1 said:
.I just had to send two into Samsung in the U.K. to get them flashed back to normal...!
Click to expand...
Click to collapse
Did this cost you?

[Q] Is my note superbricked?

Hi,
Tried to install Kingdroid 1.5 yesterday. since than I'm trying to fix my note with no success.
This is what I tried to do:
http://forum.xda-developers.com/showthread.php?t=1652831
I failed to do the following step:
-We went into recovery and install this kernel without leaving the recovery going to advanced and reboot in recovery
And the rom was not installed successfully.
because of panic, tried to restore my device to stock ICS from a previous backup - failed.
Tried another backup of GB - Failed.
Tried ODIN for Stock ICS and succeeded.
After success on this, tried restoring again to my previous backup, and since than I'm stuck on " factoryfs.img"
Tried Abd, but my device was not recognized on 3 Win machines and 1 linux box.
I have download mode available, and also recovery mode.
Currently, I'm bricked, thinking to take it to the shop I bought it at...
Any other Ideas?
Thanks a lot!
asafki said:
Hi,
Tried to install Kingdroid 1.5 yesterday. since than I'm trying to fix my note with no success.
This is what I tried to do:
http://forum.xda-developers.com/showthread.php?t=1652831
I failed to do the following step:
-We went into recovery and install this kernel without leaving the recovery going to advanced and reboot in recovery
And the rom was not installed successfully.
because of panic, tried to restore my device to stock ICS from a previous backup - failed.
Tried another backup of GB - Failed.
Tried ODIN for Stock ICS and succeeded.
After success on this, tried restoring again to my previous backup, and since than I'm stuck on " factoryfs.img"
Tried Abd, but my device was not recognized on 3 Win machines and 1 linux box.
I have download mode available, and also recovery mode.
Currently, I'm bricked, thinking to take it to the shop I bought it at...
Any other Ideas?
Thanks a lot!
Click to expand...
Click to collapse
If you have download mode available, then you're not bricked, only soft-bricked perhaps.
Try flashing again with Odin...
From my knowledge, superbricks occur when wiping on an unsafe ICS kernel, such as old i9220 leak repack, LPY...
eug3n91 said:
If you have download mode available, then you're not bricked, only soft-bricked perhaps.
Try flashing again with Odin...
From my knowledge, superbricks occur when wiping on an unsafe ICS kernel, such as old i9220 leak repack, LPY...
Click to expand...
Click to collapse
in fact all ics kernel will have chances of superbricks, since he trying to restore....which wipe data will take place... that is superbrick i think
whitepandaaa said:
in fact all ics kernel will have chances of superbricks, since he trying to restore....which wipe data will take place... that is superbrick i think
Click to expand...
Click to collapse
CM9 kernels, based on i9100 update 4 are safe. That makes official Cyanogen Mod 9 Nightlies and ROMs like Asylum and ParanoidAndroid safe
From his post I got that he was able to flash official ICS with Odin once, meaning it didn't get stuck at factory.fs...so...might be still hope
From what I get, we should add another one to the long list of hard bricks.
Sent from my GT-N7000 using XDA
If you are stuck on NAND write, factoryfs.img you are super bricked. Sorry......
I'm guessing you tried restoring your backup in CWM??
My Galaxy note is stuck on black screen no response from buttons just black screen.
This was after I did a wipe data and installed CM9 rom.
What options do I have, will one of these jtag dongles help me?
I just saw some ebay sellers offering an unbrick service for about £21 (im in the uk) where you post it to them to fix.
Any help appreciated
aquanuke said:
My Galaxy note is stuck on black screen no response from buttons just black screen.
This was after I did a wipe data and installed CM9 rom.
What options do I have, will one of these jtag dongles help me?
I just saw some ebay sellers offering an unbrick service for about £21 (im in the uk) where you post it to them to fix.
Any help appreciated
Click to expand...
Click to collapse
I think you have SOD.Its a known issue with cm9 to have SOD's.Sorry to ask this silly question,did you try to pull out the battery and boot he phone???
What is SOD ?
Yes pulled the battery, but cant get anything from phone. Even if I put it on charge nothing.. just a black screen
aquanuke said:
What is SOD ?
Yes pulled the battery, but cant get anything from phone. Even if I put it on charge nothing.. just a black screen
Click to expand...
Click to collapse
SOD is screen of death.Its nothing but when deep sleep the phone doesnt wake up again and needs to be restarted.
try to put the phone in download mode though the screen is not seen and connect it to odin and see if it gets detected.
Tried to put it in download not mode but buttons are not responding, nothing when I connect to pc either
aquanuke said:
This was after I did a wipe data and installed CM9 rom.
Click to expand...
Click to collapse
What Rom were you on prior to flashing CM9?
chasmodo said:
What Rom were you on prior to flashing CM9?
Click to expand...
Click to collapse
KingDroid_ICS_NoteMania_Edition_v1.6
aquanuke said:
KingDroid_ICS_NoteMania_Edition_v1.6
Click to expand...
Click to collapse
Ah that means you didnt read the guide correctly.It clearly states that you need to be in proper gb with cf-root kernel.
aquanuke said:
KingDroid_ICS_NoteMania_Edition_v1.6
Click to expand...
Click to collapse
You are Superbricked. Get your phone to a Samsung Service cetre for the motherboard replacement.
JTag is not an option here, it won't work.
ooopppsss ok thanks.
I even tried re-partitioning using Odin and PIT file. seems that it is always stuck on the same spot.
Fixed!!!
I used this: http://forum.xda-developers.com/showthread.php?t=1682444
Nice asafki shame I can't try that as o2 gave me a brand new note :good:
asafki said:
Fixed!!!
I used this: http://forum.xda-developers.com/showthread.php?t=1682444
Click to expand...
Click to collapse
check how much data space you lost.
Sent from my GT-P1010 using XDA

[Q] Is my GT_i9000 dead?

Hi, I need some advice. I dropped my Galaxy S in a puddle. It was submerged for the just a second, but when I fished it out, the screen had gone 'weird', so I got the battery out as quickly as possible, then dried it out for a few days in the airing cupboard. I then tried it and it started up okay, then when I swiped to unlock the screen, it froze. since then I have been unable to boot the phone. It shows the Galaxy logo, then restarts and continues that loop.
I wondered if maybe the software has just been corrupted during its bath, so I thought i might try flashing a ROM onto it to see if that would recover. I found that I could not enter recovery mode but download mode opened okay. I have tried flashing a few ROMS using Odin. I am completely new to this and have never flashed my phone before, so steep learning curve. I have so far tried - I9000XWJW5 which I believe is normally used before installing Cyanogen mod. I also downloaded the T-Mobile Stock ROM and one with this filename - CF-Root-XX_OXA_JW4-v4.4-CWM3RFS. All of these successfully downloaded to the phone and I could see the progress bar on the phone. Unfortunately I still cannot get the phone into recovery mode.
So, whats your opinion? is my phone screwed? Is there anything else I can try which may help, like formatting or anything like that.
Any help would be very much appreciated.
try search for value pack 2.3.6 and flash it then root it after that I believe you should get the recovery option.
erpurohit said:
try search for value pack 2.3.6 and flash it then root it after that I believe you should get the recovery option.
Click to expand...
Click to collapse
Unfortunately I think that was the file - I9000XWJW5 I had already tried.
did you rooted your phone after flashing
erpurohit said:
did you rooted your phone after flashing
Click to expand...
Click to collapse
Can I do that without being able to get into recovery mode?
I've just been reading that I can use a PIT file to repartition during flashing. Is it worth trying? I noticed in the Value pack TAR file it does not have a PIT file. I got one downloaded from somewhere else called - s1_odin_20100512.pit worth a shot?
I tried including the pit file as well. Odin reported success but phone is still continuous boot loop and I cannot get recovery mode up. Do you think one of those USB things that get you into download mode would help? I'm beginning to think the internal SD is knackered, or something like that.
I think the memory is brocken but i don't realy know. Send it to Samsung for a check
Sent from my GT-I9001 using xda app-developers app
I'll try them, will they still help me after I've tried reinstalling ROM etc?
Yes they will repair it if you pay for
Sent from my GT-I9001 using xda app-developers app

Categories

Resources