[Q] problems with rcads mix hd 1.6/2.3 - Nexus One Q&A, Help & Troubleshooting

Hi, I have a problem with rcads mix hd 1.6/2.3.
It's stuck on the X sign on startup and not booting.
I tried flashing 2.2 rom and its working just fine but realy slow and thats why i wanna flash 1.6!
I know there is another thread about this but nobody did comment with A solution.
Thx for the help

Flash this kernel just after flashing the rom :
http://forum.xda-developers.com/showpost.php?p=16995049&postcount=2

Great, worked.
Thanks very much for the reply

kernel link please

I managed to install Rcadsmix 2.3 . Phone X boot screen, then starts again. Kernel version 2.6.35.6-evil. Please help me. I have 1 GB ext4.

help me please

Related

[Q] Need some help badly please

hi to all ive just rooted my sgs using one click root (at last), i now have superuser installed and rom manager but how the hell do i install the clockwork recovery and hopefully then some type of free lag fix.
Can someone PLEASE PLEASE PLEASE help a noob at this.cheers.madant2011.
madant2011 said:
hi to all ive just rooted my sgs using one click root (at last), i now have superuser installed and rom manager but how the hell do i install the clockwork recovery and hopefully then some type of free lag fix.
Can someone PLEASE PLEASE PLEASE help a noob at this.cheers.madant2011.
Click to expand...
Click to collapse
What firmware do you have?
If gingerbread you can flash the voodoo kernal
http://forum.xda-developers.com/showthread.php?t=975349
This will give you clockwork and will give you an ext4 lagfix
Hopefully Done It Now
I've done it (finally i think),
my kernel version says:
2.6.32.9
[email protected] #Dark_Core_1.0
Build number is: Darky's v9.5.xwjs8
But as i switch the phone on it come up with Darky's v9.4 ?????
Hopefully i will get used to this, if you can could you please let me know if all the info above is right and whats the best rom for 2.2.1?????
Cheers Madant2011.
looks like you installed Darkys rom instead of what you wanted hehe....
rom
when i had rom manager i just downloaded what ever darky's rom that was on there.lol.
Just woundering what is the recomended rom for sgs 2.2.1 ?????
Cheers madant2011
The boot animation for darkys 9.5 does display 9.4 so don't worry about that. The darkys Rom is very good but you could upgrade your kernel to dark core 1.4 or use speedmod k13e kernel
Sent from my GT-I9000 using XDA App
kernel
Just wondering how do i update the kernel to 1.4, i already have voodoo speed mod (I Think).
download it from the darky rom site and if you get the cwm version, just flash it with your recovery
also visit http://forum.xda-developers.com/showthread.php?t=822756 for information on speedmod kernel, that is what i used when on 2.2.1, very fast and good batt life
Thanks
Thanks for all your help. just reading the link and it says it wont work because i used the one click root (I think).
Cheers madant2011

Need Rom for i9001 plus...

hello,
wish all here a happy xmas. sorry for my bad english but i hope that i can explain my problem.
I cant find the right firmware in your list.
what i need is a brandingfree firmware. sorry but iam a noob
firmware is 2.3.5
Baseband I9001XXKPF (this what i cant find)
wed-sep-28/KST2011
csc- 9001/XEGKP2
you need more ?
and question is : which custom firmware are pos. ?
hope u can help me
lg marc
You should be able to flash any custom firmware, like Performance Edition RC2 or Cranium Rom. If you want just the stock unbranded firmware, you can flash last one on the list - 2.3.6 XXKPS. I don't know what language are you using on your phone, if it is not English, pay attention to that as well - you'll find all info in relevant threads.
@tomi555,
I flashed the regular 2.3.6 yesterday.with odin very simple and easy. like 10 minutes.
I need a custom firmware a mixed between speed and akku protection.
anybody an idea ??
lg gyver
Well I can recommend you try Performance Edition RC2, it is currenty in beta, you can wait a day or two for the final release. If you are going to install beta, be sure to change CPU governor to smartass v2. Final version will have that enabled by default. It is really fast with good battery life and no bugs (but you can have small issues with installation). You will really see a difference compared to stock rom
Or you can try Cranium rom, but I haven't tested it, seems it currently has a problem if you want to set mp3 as a ringtone. Other than that it seems to be great if you want to overclock your CPU. I don't have such needs so I'm not using it.
thx tomi
ok I have the rc4 now. but how I can update to rc6 or rc5 ?? Is it pos. to run rc6 on my i9001 ??
pls help
thx gyver
You mean Cranium RC6, of course it is possible, you can download the Odin one package from their website.
http://sakindia123.prophecy.li/
For other questions, info and installation tips check out its thread.
http://forum.xda-developers.com/showthread.php?t=1313650
thx soooo much.
I used this thread to flash to rc4.
Installation:
Installation for RC6(comin' up)
*Recovery Package (Now,easy to install!)
1)Install FeaMod Recovery
2)boot into recovery mode
3)Flash Cranium Rom
4)dont wipe cache.............and fix permssions!
thats all for update up to rc6 ???
lg gyver
Yes, I believe that's the method if you downloaded
Cranium Rom RC6 (CWM Version)
You can flash it via Odin MultiDownloader from your computer just like the stock rom if you download
Cranium Rom RC6 (Odin Version by nikagl)
But... like I said I don't have that ROM so perhaps better double-check / ask in that thread
I dont know how I can install Feamod Recovery.
If I have it to flash with odin ?? where is the ariesve file ?
or can I use the same as to flash the rom ?
lg gyver
got it.
damn this is very cool. thx to the hole xda team.
@tom special thx to u
lg gyver

Andro-ID V3.3-RC3

General discussion and reviews of users running on Andro-ID V3.3-RC3. I just tried it, but switched back to original MI 410 GB rom as the phone app on this rom sucks and GPU posts lower FPS. This also causes games such as GTA III to crash unexpectedly. TJ_Style must switch back to the original dialer and incase if he wishes to change, I suggest use a dailer/phone app which has a different all receiving screen. I really face a problem receiving calls with sweaty fingers. Guys please post your reviews here. Thanks.
Hi i tried to install the rc3 7z file via SUT 1.8.2 but it doesn't seem to recognise the 7z file that's available for download.. it keeps asking for an nb0 / xml file selection . do i need to change the extension or something before flashing ?
i just had a corrupted download the redownloaded 7z was extracting fine.
older backup did not work with this rom's recovery
guy's today i nearly braked by phone.
after trying this rom, when i try to flash backup made by napstar recovery then after installation when i try to reboot the phone, i m stucked at andro-id logo.
then i take battery out and boot into recovery again, then i try to update to napstar recovery. i flash the zip file and reboot the recovery. then i am also not able boot into recovery too.
then i flash stock 2.3 rom through SUT LR v1.8.2 and boot into download mode again replaced stock recovery.img with napstar's one in image folder. after that i booted into recovery and flashed my backup
thank's god my phone is safe now and running edowar great cm7.2
Hi Kallan_suz, you need to extract the .7z file using winrar. There is a file with an extension .nb0 in it. This is the file sut lr is asking for. If U need any more help post here. Its very easy yo flash though. Connect the fone and U are good to go.
Mithil
strange problem when i try to install this .nb0 it says some kind of error using sut
Dude use SUT LR 1.8.2, the other version 1.7 gives errors. Search on Google with this name and U shud find it.
Sharp Rom Vs Andro-ID V3.3-RC3
Can anyone let me know pros and cons of these 2 two roms? Coz i am very much confused selecting one. I am using Sharp Rom for my MI410 but i didn't find anything special in this rom.
SO awating your reply eagerly.
[email protected] said:
Can anyone let me know pros and cons of these 2 two roms? Coz i am very much confused selecting one. I am using Sharp Rom for my MI410 but i didn't find anything special in this rom.
SO awating your reply eagerly.
Click to expand...
Click to collapse
hi
i have used both the roms and both seem to be more or less the same
its just that i feel that the battery is better on the sharp rom
Thanks for ur reply bro. so may be i should use this rom untill our great developers gift us with most awaited ICS ROM
Sent from my SH8188U using XDA App
Hi, having problem when reflash cm7 rom from andro-id rc3 via cwm recovery.
After install Andro-id RC3 rom via SUT LR, i decided went back to edowar cm7, then i flash the cm7 thru cwm recovery (fullwipe & install zip)
I end up stuck at the "ANDRO-ID" logo during reboot, now I flash back to andro-id rc3 via SUT again.
May I know how to flash CM7 rom from Andro-id? need help =(
orangez1988 said:
Hi, having problem when reflash cm7 rom from andro-id rc3 via cwm recovery.
After install Andro-id RC3 rom via SUT LR, i decided went back to edowar cm7, then i flash the cm7 thru cwm recovery (fullwipe & install zip)
I end up stuck at the "ANDRO-ID" logo during reboot, now I flash back to andro-id rc3 via SUT again.
May I know how to flash CM7 rom from Andro-id? need help =(
Click to expand...
Click to collapse
Ok, here's what U need to do. Flash back to the stock SPICE GB rom, because Sharp and RC3 use different kernel. Then flash back to CM 7.2.
Hope this helps.
Guide to Install Rom using Sut LR
Hello friends,
This video will let you know how to install ROM using
SUT LR 1.8.2 well check out thje video how to install
for those ho do not know or have any problem installing...
in this i install Andro-id RC3
Thankz TJ. your the man.
as said by you. all the RC3 download should be counted...
hope you wil come out with ICS soon.. we know your on the road map to ICS.
hope to see soon.
This video will show you how to install the Andro-id Rc3
inforall.webs.com/spicemi410.htm
please download the software from the below link...
you will need SUT LR software to install the RC3
mediafire.com/download.php?di3xii1yy3ii4c3
hi i noticed few thing in this fw the camera refused to work by giving cannot connect error then after somehow it worked the sound production in hp is not that great earlier was using csl gingerbread rom the sound production was awesome plz contribute is it me or is it the rom whose facing such problem
Having wifi connection problem with this rom
I have tested this rom for a few days.
Everything is ok, but the only problem I have is the wifi connection.
It can't connect to my office new TP-Link TL-WA801ND.
But it works with my old BelkinG.
Anyone can help me?? Thanks!!
Althought I'm running on CM7 now
But I was use this ROM for 6weeks
This ROM has good performance n very stable
But 2 things which annoying me,,so annoying
1.Headset Volume too loud,,maybe kernel build problem,,I use headset volume control to minimize problem
2.If RAM usage too heavy,,it cause auto reboot(not sudden reboot)so you must using AKM/AMM or for best experience,use V6Supercharger script
Thats I feel of this ROM
Hey guys,,is anyone have Bravia engine tweak for this device?
Edit : ah i forgot 1thing,,bad camera start if you have low RAM,,it caused black screen n FC,,try again if you experience that,also bad video result,resulting .3gp
Sent from my CSL-MI410 using Tapatalk 2
I just installed this ROM last night. I don't find any significant difference between this and sharp ROM, with some added features. Everything works ok including FM radio. I did not test the hdmi feature.
Guys can someone tell me what is the difference between a stock ROM like Sharp and this Andro-ID V3.3-RC3, I find this very similar to rooted sharp ROM with some differences like, lock screen and bloatware removed. I am sure there must be some advantages and better features that I might be not aware of. Guys please enlighten me about the better features that I can use. I am on this ROM right now.
Thanks in advance...
Sent from my FIH-FB0 on Andro-ID V3.3-RC3 using XDA
Hi,
I have just installed this ROM. Everything seems to be working fine except GPS. The GPS is not locking. I tried rebooting several times. Whenever I tried to turn GPS on, it's just blinking but not locking. I tried for more than 15 minutes. Any fix for this?
Sent from my FIH-FB0 using XDA
Install faster fix and choose a server for your country then try gps test app for locking
Sent from my MacLite-FB0 using XDA
bravida engine
does bravida engine work on this room

[Q] Samsung Galaxy S Boost

Hey guys I apologize if this post doesn't belong here, but please bear with me I am still a "newb" in the smartphone world. I recently managed ( using some online tutorials) to install a rooted version of android 2.3.6 on my SGS. For the first 3 weeks everything worked like a charm, my phone was smooth and everything, I was really satisfied with it. But lately it has been running really badly, it lags a lot, it takes a lot longer to load stuff, etc. I beg you guys to help me do something with it. I would really like to install a new firmware that allows me to overlock the processor and stuff like that ( like CyanogenMod), so can you guys please point in the direction of a good tutorial that even a moron like me can follow. I'm having a lot of trouble understanding what kernels I can use and what exactly the CyanogemMod Nightlys are or how I can install new firmware using Rom Manager or CWM. Thank you guys in advance and once again sorry if the post is in the wrong place.
rom
I had same problem with 2.3.5 .
I installed a few days ICS 4.0.4. from dark knight and it work nice
You can try it
Go for ICS
Hi,
I am on [ROM][ICS][I9000] Team ICSSGS RC4.2 for a few weeks now. It's blazing fast and stable. I was hesitating at first, but did it anyway and now i'm very happy with it. I also flashed the Semaphore kernel.
All is explainened in detail in their threads.
Hi,
since more then two weeks I'm using ICSSGS RC 4.2 with the semaphore kernel and I'm very happy with this rom. It's fast and doesn't lag at all.
With this kernel you can overclock the cpu by using the semaphore tool (is installes automatically when flashing the semaphore kernel in cwm.
You will find a threat how to install this rom, if you have some more question somebody will help you.
Homer1074

[Q] {Help urgent} Stuck at boot loop

Hey guys i am in a mess ryt now need ur urgent help i rooted my stock ics DDLP8 Rom sucessfully and also i installed speed mod kernel v3 on it everything worked fyn now i didnt know much bt installing custom rom so i download chrack ics rom v5 it was mentioned in installation instruction not to wipe jjust wipe cache & dalvik cache if comming from rooted stock ics room i installed using CWN but after flashing when i reboot it get stuck on samsung logo the bootloop starts please help it was LPY based room does it make any difference what to do now ?? as phone cant be boot up to normal
I Tried flashing the stock rom using ODIN PC But it fails always please help guys can i factory reset it as its risky to factory reset ICS STOCK ROMS
Post your concern on chrack thread they can help you there. They know their rom.
i Am unable to post reply there as its xda policy please help me i am a noob and seriously want to get my cell back
arjun2312 said:
i Am unable to post reply there as its xda policy please help me i am a noob and seriously want to get my cell back
Click to expand...
Click to collapse
After flashing the ics stock rom again it will not boot up?
thank u dude i did flashed stock rom using odin pc can u please help me how to install paranoid to my phone
Go to paranoid thread they can explained it better by reading carefully. I just gonna gave you a warning, flash it while in gingerbread rom not in ice cream sandwich rom it will brick your phone.
? safe to flash ICS/GB if currently on stpck ICS
jonpaslim said:
After flashing the ics stock rom again it will not boot up?
Click to expand...
Click to collapse
Is it safe to flash the stock ICS if I'm currently on sotck ICS LQ2? I have similar problem(stuck at N7000 boot logo).I would be much obliged to anyone for help. My problem is posted here.
Thanks!
booki56 said:
Is it safe to flash the stock ICS if I'm currently on sotck ICS LQ2? I have similar problem(stuck at N7000 boot logo).I would be much obliged to anyone for help. My problem is posted here.
Thanks!
Click to expand...
Click to collapse
Short answer is no. All stock ics kernels are affected. Flash a safe gb kernel before flashing lq2.
Check you're other thread, there's some good info there now.
Sent from my Paranoid Android GT-N7000. It doesn't get much better than this!

Categories

Resources