Hello all,
My problem is very simple. I follow lot of tutorial on how to make WPDM works... but none of them seems to be give a right way to work around my problem.
I succeded to install touchXperience with WPDM but... every time i try to connect using USB, WPDM says:
TouchXperience version 1.3.2.0 or later is required. Please unistall the current version of TouchXperience.
So... i read that i have to restore default settings and restart my computer. But i did that thousand of time and it never work for me.
I really dont see where is my mistakes... if you have some hints.... cause i'm a bit lost.
Thx in advance.
PS: I'm quite bad in english. Plz.. don't blame me
Globalfailure said:
Hello all,
My problem is very simple. I follow lot of tutorial on how to make WPDM works... but none of them seems to be give a right way to work around my problem.
I succeded to install touchXperience with WPDM but... every time i try to connect using USB, WPDM says:
TouchXperience version 1.3.2.0 or later is required. Please unistall the current version of TouchXperience.
So... i read that i have to restore default settings and restart my computer. But i did that thousand of time and it never work for me.
I really dont see where is my mistakes... if you have some hints.... cause i'm a bit lost.
Thx in advance.
PS: I'm quite bad in english. Plz.. don't blame me
Click to expand...
Click to collapse
1]Disconnect yur phone
2]Uninstall your Touchexperience from your phone
3]connect yourphone to your pc
4]activate the WPDM
5}It will automatically install new TE to your phone.
Related
my computer is not reconizer this my Kaiser help me urgent
That's very little information. Has it ever worked? What have you changed recently? Does your computer even acknowledge that the device was plugged in? Is there an existing partnership?
You can try ending all partnerships between the computer and the phone. Without knowing what you've done, it's hard to give any more advice than that.
I'd also direct you to the Wiki and the Sticky...they both have lots and lots of information about the phone. I'm just assuming this has something to do with flashing a ROM on your phone because it's in the Upgrading forum and not the general Kaiser forum.
dont understand, i have windows xp and activesync dont have reconizer the kaiser!!! and dont flash the pda :S:S
Your English is obviously poor.
So, try this:
1) delete your devise from Activesync.
2) reboot your computer
3) plug in your phone to the computer.
Make sure you have the latest version of ActiveSync as well.
If I understand you correctly, you have not flashed your phone. Is that correct? If I am correct and you are still using the original ROM and software, then this question really belongs in the Kaiser forum and not the Kaiser Upgrading forum.
grizzley said:
Your English is obviously poor.
So, try this:
1) delete your devise from Activesync.
2) reboot your computer
3) plug in your phone to the computer.
Click to expand...
Click to collapse
DOnt Work!!!!!! :S flash without usb ???? how to???
x-club said:
DOnt Work!!!!!! :S flash without usb ???? how to???
Click to expand...
Click to collapse
HELLO I HAVE THE SAME TROUBLE WITH MY TILT THE USB IS NOT WORKING SO I HAD TO USE MY SD CARD AND FLASH MY PHONE ITS KIND HARD BUT ONE YOU READ AND DO STEP BY STEP IT REALLY EASY.IM SENDING YOU THI SITE TO READ ON HOW TO DO THIS HOPE THIS HELPS AND IF SO PLEASE LEAVE A COMMENT ON HOW I HELPED I PROMISED THIS SITE SINCE THERE ARE FEW THAT TAKE THE TIME TO QWORK WITH YOU FOR FREE I SAID I WOULD TRY TO DO THE SAME.. A SPECIAL THANKS TO ALLTHE WAY FOR TEACHING ME.....
http://forum.xda-developers.com/showthread.php?t=336158
Flashing using MicroSD Card - xda-developers HOPE THIS IS WHAT YOUR LOOKING FOR..GODBLESS....
sexylatin1 said:
HELLO I HAVE THE SAME TROUBLE WITH MY TILT THE USB IS NOT WORKING SO I HAD TO USE MY SD CARD AND FLASH MY PHONE ITS KIND HARD BUT ONE YOU READ AND DO STEP BY STEP IT REALLY EASY.IM SENDING YOU THI SITE TO READ ON HOW TO DO THIS HOPE THIS HELPS AND IF SO PLEASE LEAVE A COMMENT ON HOW I HELPED I PROMISED THIS SITE SINCE THERE ARE FEW THAT TAKE THE TIME TO QWORK WITH YOU FOR FREE I SAID I WOULD TRY TO DO THE SAME.. A SPECIAL THANKS TO ALLTHE WAY FOR TEACHING ME.....
http://forum.xda-developers.com/showthread.php?t=336158
Flashing using MicroSD Card - xda-developers HOPE THIS IS WHAT YOUR LOOKING FOR..GODBLESS....
Click to expand...
Click to collapse
how to format microsd and is work in card 2GB?
x-club said:
DOnt Work!!!!!! :S flash without usb ???? how to???
Click to expand...
Click to collapse
If this is the best you can come up with after people have tried to help then I guess you haven't read the WIKI yet.
It's obvious English isn't your first language, but if you don't read AND understand the WIKI then you will break your phone.
If necessary get a friend to help with translation. Or post your question in English and your own language - then maybe someone on the forum who speaks your language can help out.
Greetings everyone,
I would like to ask for some advice.
I bought a HTC TYTN II and wanted to flash it to a ROM I found on the forum.
But to do that I had to use nueSPL-2.47.exe
That turned out to be a mistake as at the moment it started formatting to FAT32 the screen freezed. And I waited for around 15min. But nothing happend.
Now needless to say the device does not function. I tried a hard reset(Camera+Power+Reset) and just (Reset). But all I get is a screen darker than the pits off hell.
I am able to get the power light burning but that is it. Already tried putting the battery out and in again. But all to no avail. Maybe one of you can help me?
Thank you in advance.
-
Previous OS: Windows 6.1 (Dutch)
Active sync: 4.5.0
PC OS: Windows XP pro (English)
Just a thought but...you might want to check the Kaiser forum instead...
Posted in Titan forum. Moved to Kaiser forum.
You flashed a Titan SPL to your Kaiser?
Oh dear, not to worry, it might be fixable...
Can you get to your Bootloader?
Ta
Dave
Confused "Tytn" with "Titan", too bad.. That's already happened, if you search for "nuespl" in the Kaiser forum you should find a thread about someone else who had the same problem recently.
kilrah said:
Confused "Tytn" with "Titan", too bad.. That's already happened, if you search for "nuespl" in the Kaiser forum you should find a thread about someone else who had the same problem recently.
Click to expand...
Click to collapse
The other guy never fixed his phone
Dave
uh oh... what was your radio version? does the PC still try to load a driver when you connect the phone?
Wrong firmware now that explains things.
It seems that the soft/hard reset and boot loader are not working for me. All I ever get is the power light and no screen at all.
Just my luck.
My phone was a 3G version.
When I connect it via USB it does try and load drivers but it does not find the correct drivers. While the phone was ok the drivers were fine.
Strange.
I sure hope I do not have to send it to my supplier. Because the phone is just 2 weeks old ;-)
Jin_member_of_triforce said:
Wrong firmware now that explains things.
It seems that the soft/hard reset and boot loader are not working for me. All I ever get is the power light and no screen at all.
Just my luck.
My phone was a 3G version.
When I connect it via USB it does try and load drivers but it does not find the correct drivers. While the phone was ok the drivers were fine.
Strange.
Click to expand...
Click to collapse
are you able to load these drivers: http://forum.xda-developers.com/attachment.php?attachmentid=71038&d=1203255530
3G, okay, all of them are 3G... do you remember exact radio version. no problem if not, though.
Sorry I do not know the exact number.
I was able to install the drivers. So thanks for that.
But If I try and get onto my phone I have no folders. And active sync does not see the device. Maybe I need to use a program like artemis to get files on there?
There is of course a change I might be able to get files on there by putting my SD card in a card reader.
But does it boot from there?
Pocket controller-pro did not work for me.
Jin_member_of_triforce said:
Sorry I do not know the exact number.
I was able to install the drivers. So thanks for that.
But If I try and get onto my phone I have no folders. And active sync does not see the device. Maybe I need to use a program like artemis to get files on there?
Click to expand...
Click to collapse
that will not help, but there is another way... PM me, as it needs interactive step by step instructions.
im having the same issue i just ran the neuspl 2.47 and my htc tilt wont work the power light comes on and thats it can somepone please help me out i am in need of help badly!
hi, i ve try several time to install version of windows live for mobileon my diamond, even the link in xda developper forum, the software is welle install. At the end of the installation, every time it says: synchronization failed, i ve try 4 version, and it is the same, my username and password are good, because i ve manage to connect via palringo software...
could you please help me?
i ve got a sfr diamond from france version wm6.1
thank u all
Hi Nightcrane,
sorry to hear that your WLM is not working...
I've had some probs myself as well with it, but I found a version which should work...
1st of all...remove all what's left of your WLM on your mobile...
after that, I have added 2 apps for you you have to install:
-windows live noIm 0409
softreset
-Windows Live 10.6.39.1300
softreset
LINK FOR 2nd app: http://www.4shared.com/file/75788789/558cd374/Windows_Live_Messenger_106391300.html
EDIT: For some reason I can't upload the other file
After that you should be able to connect to Windows Live....
give it a try mate
good luck
regards
Jeroen
very sorry, maybe i am dumb, but i do it and it does not work, but i think i am not doing the right thing, when i install the first soft, at the end of the installation it doesnt ask me to reset my htc. the second one yes, so maybe i take a wrong way... when you say soft reset, i switch off my phone? and when i install the first file, and then the second one, how can i know if the first programme is removed?because normally, it has to ask me if i want to remove the old version...
sorry for my bad english, and my knowledgeon that type of problems
regards...
nightcrane said:
very sorry, maybe i am dumb, but i do it and it does not work, but i think i am not doing the right thing, when i install the first soft, at the end of the installation it doesnt ask me to reset my htc. the second one yes, so maybe i take a wrong way... when you say soft reset, i switch off my phone? and when i install the first file, and then the second one, how can i know if the first programme is removed?because normally, it has to ask me if i want to remove the old version...
sorry for my bad english, and my knowledgeon that type of problems
regards...
Click to expand...
Click to collapse
Hi mate,
I don't think you're dumb
No, I think i know why it doesn't work for you....you need to install those apps in the way I told you, INCLUDING a soft reset between the 2 programs...and a soft reset can also be done by pressing the powerbutton to turn the device off...wait about 10 seconds and turn it back on...
afterwards you install the 2nd one WITHOUT uninstalling the 1st one...because that one will be overwritten with the new one....
It should work...that's the way it works by me...I've done the same thing...
Good luck fella
Windows Live Mobile
I have downloaded the Windows Live cab from http://www.microsoft.com/windowsmobile/mobile/wl/languages-en-us.mspx , but it doesn't contain the Messenger sw.
Where can I find it? In a oldest ROM i have it installed......
bye
TheJackall
Hello, I am new here. I tried to change the rom in my SE X1 myself.
My first problem was on the first step.
I opened hardSPL, the program found the phone. But it doesn't update it. After 30 seconds it says: Error 202: CONNECTION
but I connected it, activesync is open??!!!
And do I make everything right?
1.) HardSPL - to open the phone for the new rom
2.) how to get new rom on the phone?
3.) how to make it to a perfect end?
please help me, I tried to read me through the forum, but now i am confused.
thank you
best regards
daniel
Strogach77 said:
Hello, I am new here. I tried to change the rom in my SE X1 myself.
My first problem was on the first step.
I opened hardSPL, the program found the phone. But it doesn't update it. After 30 seconds it says: Error 202: CONNECTION
but I connected it, activesync is open??!!!
And do I make everything right?
1.) HardSPL - to open the phone for the new rom
2.) how to get new rom on the phone?
3.) how to make it to a perfect end?
please help me, I tried to read me through the forum, but now i am confused.
thank you
best regards
daniel
Click to expand...
Click to collapse
After you have succeeded in installing the HardSPL you have to download any ROM that you want to try on this forum. I suggest that you use the MicroSD method as it is much easier than updating it using your PC. Try reading this thread, if you still have not.
http://forum.xda-developers.com/showthread.php?t=446070 and also this one (for flashing ROM's using MicroSD method) http://forum.xda-developers.com/showthread.php?t=445662
You can also read this thread for a more comprehensive tutorial http://forum.xda-developers.com/showthread.php?t=497511
Hello XDA
Well this is my first thread in this form and i m really optimistic about getting the required help. Many of the users would have already recognised my problem about WDMC 6.1. Its been a pain in the ass from last 3 weeks finding a solution that why my HTC HD7 is not recognised by wdmc, I have been trying everything like attaching my phone in different pc and lappys but it still doesnt work. Can anyone help me to fix these problem so that i can flash custom roms on my phone. Sorry for my bad English.
Thanks.
Rainish said:
Hello XDA
Well this is my first thread in this form and i m really optimistic about getting the required help. Many of the users would have already recognised my problem about WDMC 6.1. Its been a pain in the ass from last 3 weeks finding a solution that why my HTC HD7 is not recognised by wdmc, I have been trying everything like attaching my phone in different pc and lappys but it still doesnt work. Can anyone help me to fix these problem so that i can flash custom roms on my phone. Sorry for my bad English.
Thanks.
Click to expand...
Click to collapse
please anyone......
WMDC is for Windows Mobile
Not Windows Phone 7 or 8.
You must use Zune for the music, photos and videos.
You want custom Roms?
http://forum.xda-developers.com/showthread.php?t=1597837
You are doing it WRONG! WMDC is not needed for that matter.
Good luck.