Database Develop

[Q] Baseband 0405 D2 Germany

Hi,
I have an unbranded LG Optimus 2X with Vodafone D2 in Germany!
Since I got an custom rom on the mobile I get no data connection when I'm in 3G and sometimes also in HSDPA!
I tried Fearkills, BlazingDragon and even flashed back to stock! but I still have the problem!
By stock I used this: http://forum.xda-developers.com/showthread.php?t=1035041 (the czech,germany,... version)
While getting custom rom I also flashed new baseband version so I think it's because of that! Before I got 0218 or sth like this...
Now I tried to flash the older baseband version 0315 in stock, but still the problem!!!!
Don't know what to do else, do you have similiar problem or any idea which could help?
Desperatly

You set the correct APN?

Yes, I think so, got the standard settings:
APN: web.vodafone.de
MCC:262
MNC:02
Authentication-typ: none
APN-Typ: default
Rest not set!
and the event.vodafone.de but this is only for mms, right?

Hmm, the APN is correct. Could it be related to your SIM?

Hmm, well it is the SIM of my old mobile (HTC Magic) so its 1 and a half year old...
Can I check it when I put it into another mobile and there the 3G thing works??

Fendria said:
Hmm, well it is the SIM of my old mobile (HTC Magic) so its 1 and a half year old...
Can I check it when I put it into another mobile and there the 3G thing works??
Click to expand...
Click to collapse
yes, just try it.
I have no idea otherwise if gsm is working.

Fendria said:
Hi,
I have an unbranded LG Optimus 2X with Vodafone D2 in Germany!
Since I got an custom rom on the mobile I get no data connection when I'm in 3G and sometimes also in HSDPA!
I tried Fearkills, BlazingDragon and even flashed back to stock! but I still have the problem!
By stock I used this: http://forum.xda-developers.com/showthread.php?t=1035041 (the czech,germany,... version)
While getting custom rom I also flashed new baseband version so I think it's because of that! Before I got 0218 or sth like this...
Now I tried to flash the older baseband version 0315 in stock, but still the problem!!!!
Don't know what to do else, do you have similiar problem or any idea which could help?
Desperatly
Click to expand...
Click to collapse
Try to delete all APN and then write them back again.
Sent from my LG-P990 using Tapatalk

Thanks so far for your suggestions!
Tried to put another sim-card into the mobile phone, but same problem there!
But it was a very old card, will test tomorrow with a newer card...
I cannot delete the apns, but I just did a reset, and it seems to help!
I got a website loaded by 3G! but it also died once so far ( then the arrows get black and no conncetion again)...
Some more suggestions what it could be? at the moment I'm in stock and even updated the baseband by LG's update software( V10b to V10c, 0315 to 0405) but still get many failures that I dont have connection, although I have!

Changing SIM-Cards didn't help, the sim put into my mobile had the same problems...
I even flashed stock with nvflash, but I can't find a version where the baseband is included, someone of you knows where to get one?

use APN Backup & Restore
If you backup, delete and then restore all APNs you can delete them manually (they are not greyed out anymore)
You can also delete them all and define the one you need manually.

Could it be that there is a general problem with VF Germany?
I also have a VF Sim and my Optimus often loses the network connection.
It only connects again when I power it off and on again. Otherwise I have no phone or data connection. Very annoying.

I have a new hint!
when im calling *#*#4636#*#* and get to mobile info(sry have different language) and then deactivate network and then want to change the network mode from for example gsm only to doesnt matter what there stands unknown and cant change it anymore! This doesnt work as supposed to be right?
After that i have no connection at all cannot connect anymore and must restart to have anything again!
I hope this helps for some pros to help me fixing it...
Sent from my LG-P990 using XDA App

When my comnection dies the symbol for "at home "dissappears...
Is there perhaps a logfile for that or a possibility to look whats going wrong with adb?
Anyone of the othersbwho have the problem, could you fix it?
Sent from my LG-P990 using XDA App

No Sim Detected LG Optimus 2x :(

Hi
My phone suddenly stopped detecting all sim cards ( I have tried various working sims ).
It is running CM 7.2 and has been running cm 7.2 for a few months with no problems.
Today I took out the sim and put it back in to reboot, all was fine. I went to shower, came back and the sim suddenly stopped being detected.
I have tried to google but it seems most problems are to do with flashing a new rom and having the sim not work, my case is that the rom has been the same for a few months.
I have tried to flash different roms and I still have the same problem. I have a gut feeling it is the hardware that reads the sim that is faulty.
I have read something about a baseband, I dont know what that is but if it helps, when i go to the settings and click on 'about phone'
It says there is a baseband and it is version something. There are no question marks or anything like that.
I appreciate the help and would love some more troubleshooting suggestions.
The worst case scenario is unrooting it, flashing stock rom and send it back to warranty. I actually don't know how to do that so if anyone has a guide lying around please link me on that.

I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app

asmerito said:
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?

cimore000 said:
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
Click to expand...
Click to collapse
First you flash BB, then download RIL with GetRil. Read completely through BB sticky topic in development section. All answers are there.
http://forum.xda-developers.com/showthread.php?t=1658047
[Baseband][P990] Complete Baseband overview thread
Sent from my LG-P990 using xda app-developers app

You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.

Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I checked the IMEI and it matches.
I have some extra information if it helps, when I choose a random RIL from getril, the battery might become a ? mark and the sim card not detected error doesnt show anymore, however when I put it back to the original RIL, my battery bar starts showing the 'power left' and also the sim not detecting error shows again.

Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I get the SIM Toolkit Incompatible Handset error and then whether I press OK or Cancel, shortly after I lose mobile network access. I've been trying all manner of different things, Smart Flashing, NVflashing, changing basebands, Rils, you name it.
I'm currently on the V30B root ROM http://forum.xda-developers.com/showthread.php?t=2064793 and the Ril matches the baseband from that ROM, but that hasn't helped either. So I went and check the in phone and behind battery IMEI and they are different! I'd love to hear what your solution to this is!

Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
My problem was no service and IMEI unknown... Never managed to solve it. Reverted to old bootloader and problem solved.
Sent from my LG-P990 using xda app-developers app

IMEI Solution
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
4) Install a program called Hyperterminal on your PC and open it. In COM settings select same port as in device manager -> LGE Mobile USB Seial Port (should be 115200)
5) Type at%imei and it should respond by saying OK
6) Now type at%imei and it should now display your current IMEI number.
7) Type at%imei=XXXXXXXXXXXXXXX where X is your original IMEI number.
8) Reset phone.
You might have to reboot your phone after step 3. But see if it works without.

I have been thinking that this is a hardware issue, I have not changed a single setting/rom/baseband at all, the sim just wasnt detecting when I came back to my phone. The rom and settings were the same for a number of months.
I am now going to give it in to warranty, however it only has 1 month left. I have tried to install the stock firmware but with no luck..
I found a rom to flash for my region, it is a zip file but when I try flash it with Clockworkmod, it says installation aborted....
Shouldnt I be able to flash the roms with CWM? The file is a zip file just like the CM7.2 rom I flashed. Do I need nvflash instead? I found the rom here :
http://forum.xda-developers.com/showthread.php?t=1852112 (the download links were removed so I googled the exact same rom)
I was also told that if I just use the LG update tool, it sohuld automatically update the phone to stock firmware AND unroot it, only that the update tool gives me an error. Whats the best approach guys?? I need to get this fixed before my warranty goes.

Custom40 said:
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu...
Click to expand...
Click to collapse
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!

[-Stash-] said:
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
Click to expand...
Click to collapse
Trust me, you can try whatever you want. This is the only way to get it working. I spent hours and hours to figure this out, so I guarantee you it will work.

please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou

interr said:
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
Click to expand...
Click to collapse
Your imei should not show in settings, it should show in the back of your battery and when you dial : *#06# into the phone (where you dial numbers for calls).
Cant help you with baseband.
OP here, I am trying to unroot my phone and put stock firmware to get warranty to fix the simcard reader ( i believe it is a hardware issue ).
If I use nvflash and flash any stock firmware I can find on the internet, will that be OK? I have a feeling each region of optimus 2x has slight differences in firmware, eg swedish stock roms and australian stock roms may differ in the default applications etc.
Will it be ok to just install any kind of stock rom for my warranty? Help would be appreciated my warranty is running out in less than a month now.
I also tried to flash stock firmware with CMW, it didnt work. I am about to try NVflash, so I went into greater detail in page 1 but no one replied yet. If you guys know please help. I am more familiar with CMW than NVflash. I have not used NVflash yet.

hahah after 2 sleeples nights i menage to restore my sim to be recognize ,whit this metod,.. NFlash rulles ))
http://www.ibtimes.co.uk/articles/408044/20121124/unbrick-tool-lg-optimus-p990.htm
http://androidadvices.com/unbrick-lg-optimus-2x-p990-android-phone-tutorial/
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
this is also the best metod for unbricking your phone, .

INSTALLATION:
ATTENTION
The flasher with NVFlash clears all memory, including the Internal SD., so make a backup if u can..
Download this file: http://bayfiles.com/file/yKZL/eGZ31A/driver.rar The pack includes the APX driver (folder driver)
http://www.putlocker.com/file/4CEDEB7E0893B6F1
1.- Remove the battery to the phone.
2.- Press and hold Vol- and Vol+ and without releasing the 2 keys connect the USB cable to the PC
3.- Go to the progmaq-default-cm-10-20121105 folder and run flash icon... folow instruction., wait wait wait Enjoy!

Custom40 said:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
Click to expand...
Click to collapse
I managed to get an old CM7 install back on the p990,but the above is still not working for me :/
After I finish typing in 1809#*990# in dialer, nothing happens. If I press the green phone handset icon to dial that number it comes up with an error message of "Mobile network not available".
Any further advice? Thanks.

Okay, I failed at reading comprehension – it has to be an LG Gingerbread ROM for this code to work, NOT a CM-based one!
Trying one from somewhere-I-cannot-link-to-yet

Success! Once I was back on the original stock LG Gingerbread ROM, I could reset the IMEI and make/receive calls again using this method. Thank you very much!
Now all flashed back onto a nice "working" nightly CM10.1 and a very happy little device.
Many thanks all.

Hi,
Anyone have a working link to "progmaq-default-cm-10-20121105 ". My Optimus 2x has been bricked as well, and can't find any other version of this on Google unfortunately
Appreciate all help.

[Q] The problem with KU5900

Hi guys! I need your help. I read the forum, but did not solve the problem. I'll tell you more. Bought on ebay LG P970. I do not know what it KU5900. It was a firmware Android 2.3. Using the program LgMobileSupport put updated to version Android 4.0.4 After the update the phone does not boot, the screen inscription "olleh". I read the forums, and using a program SmartFlashTool put firmware lgp970_v30b_cis. The phone is loaded, but does not catch the network 3G. In 2G often loses the signal, especially from the base stations within the network. Still trying to reflash. Put Korean radio module firmware KU5900_CP.fls, and bin file European lgp970_v30b_cis_ap.bin In this case, the phone does not see the Sim card. If I put the Korean firmware V30I phone does not boot, the screen only logo LG. Tried way from here http://forum.xda-developers.com/showpost.php?p=33881192&postcount=643 - also does not see the sim card. I understand the problem in the firmware radio module, how can fix this problem? Thanks in advance for your help.
Sorry for my bad English.

neo04 said:
Hi guys! I need your help. I read the forum, but did not solve the problem. I'll tell you more. Bought on ebay LG P970. I do not know what it KU5900. It was a firmware Android 2.3. Using the program LgMobileSupport put updated to version Android 4.0.4 After the update the phone does not boot, the screen inscription "olleh". I read the forums, and using a program SmartFlashTool put firmware lgp970_v30b_cis. The phone is loaded, but does not catch the network 3G. In 2G often loses the signal, especially from the base stations within the network. Still trying to reflash. Put Korean radio module firmware KU5900_CP.fls, and bin file European lgp970_v30b_cis_ap.bin In this case, the phone does not see the Sim card. If I put the Korean firmware V30I phone does not boot, the screen only logo LG. Tried way from here http://forum.xda-developers.com/showpost.php?p=33881192&postcount=643 - also does not see the sim card. I understand the problem in the firmware radio module, how can fix this problem? Thanks in advance for your help.
Sorry for my bad English.
Click to expand...
Click to collapse
Are you sure its ku5900. Cause if it is. It wont have any signal even in 2g when flashed with p970 stock rom.
Sent from my LG-P970 using xda app-developers app

ouroboros12 said:
Are you sure its ku5900. Cause if it is. It wont have any signal even in 2g when flashed with p970 stock rom.
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
I think yes, if I check the online LG IMEI number, I get the following information
LGKU5900 AKTFKT 106KPLC0118208 20110603 V30I_00 GLOBAL / GLOBAL NN EG CDMA
Click to expand...
Click to collapse
Also on the phone internal memory 5,31 Gb. LgMobileSupport also shows KU5900. On firmware for Europe catches only 2G signal is not stable.

neo04 said:
I think yes, if I check the online LG IMEI number, I get the following information
Also on the phone internal memory 5,31 Gb. LgMobileSupport also shows KU5900. On firmware for Europe catches only 2G signal is not stable.
Click to expand...
Click to collapse
Good. Then just take cp and ap bins of v30j or I then you should be fine. If it gets stuck may be you used the auto extractor
Sent from my LG-P970 using xda app-developers app

ouroboros12, Thanks for the tips! I downloaded the firmware v30j, did bin files and fls. Flashed through SmartFlashTool. The phone is loaded and running, but the network does not work. SIM card is not recognized. And it is still written in the phone identity IMEI Unknown, Serial number 000000, Baseband version Unknown. How to fix it?

neo04 said:
ouroboros12, Thanks for the tips! I downloaded the firmware v30j, did bin files and fls. Flashed through SmartFlashTool. The phone is loaded and running, but the network does not work. SIM card is not recognized. And it is still written in the phone identity IMEI Unknown, Serial number 000000, Baseband version Unknown. How to fix it?
Click to expand...
Click to collapse
Hmm. Try another sim if the problem still persists. Maybe its not unlocked yet. Its really weird that you have a signal with p970 baseband. Goodluck.
Sent from my LG-P970 using xda app-developers app

ouroboros12 said:
Hmm. Try another sim if the problem still persists. Maybe its not unlocked yet.
Click to expand...
Click to collapse
Thanks! Tried other sim, they are not recognized. We'll have to carry phone in service. Maybe there are some other ideas?
How can I check whether the phone is locked?
Another request. Please tell me who owns the phone KU5900. What is your version of the Baseband?

neo04 said:
Hi guys! I need your help. I read the forum, but did not solve the problem. I'll tell you more. Bought on ebay LG P970. I do not know what it KU5900. It was a firmware Android 2.3. Using the program LgMobileSupport put updated to version Android 4.0.4 After the update the phone does not boot, the screen inscription "olleh".
Click to expand...
Click to collapse
I got mine to work after struggling a little, after you have flashed V30I, let it start and stuck at olleh thing, unplug it from usb then remove battery, put it back then press and hold VOLUME DOWN + G + POWER, When it start to reset release those buttons, wait a little and waaaah, the phone will start with korean language and everything will be ok

[Q] Full signal but not able to make calls HELP

Well i got a problem.
My LG optimus 2x doesn't want to make when it has full signal. And that's ONLY when it has full signal. As soon as I start calling it says call ended. Other people can't call me either. Everything else works fine from internet to messaging (receiving and sending). I have tried numerous basebands (0725 v20q, 0725 v10d, 0218 v10b) and the one I'm on now which is V30A.
I'm currently running stock LG 4.04.
I have tried the phone with a different sim and it still didn't make calls.
Switching to 2G or turning airplane mode on/off doesn't help neither doe turning on wcdma or gsm only signal.
I was installing the basebands with LG P990 All in one ToolKit.
ANY HELP GUYS.
Thanks

Switch to a custom rom ^^

Already tried it doesn't help. I will flash Avatar ROM again but first i want to fix this

Nobody knows? I don't think it hardware since the phone can make calls but only when its not on full signal.

Could it be IMEI problem?
Have you tried a different sim card?

Dial *#06# and see if your imei appears

IMEI problem what do you mean by that?
The IMEI does come up.
And yes i have tried different sim cards with the same result.

Does the displayed imei match with the one printed on the sticker under the battery?

Yep they match.

You have the problem which I had when I was using su660 basebands. As I see you were trying p990 basebands maybe you cold try a su660 baseband. Here's the su660 baseband with it's ril Flash the bb with smartflash, then if you are on stock or stock based rom copy the ril file to /system/lib and set the ril permisson to rw-r--r--

Will try. I'll post back if it works or not.

bitdomo said:
You have the problem which I had when I was using su660 basebands. As I see you were trying p990 basebands maybe you cold try a su660 baseband. Here's the su660 baseband with it's ril Flash the bb with smartflash, then if you are on stock or stock based rom copy the ril file to /system/lib and set the ril permisson to rw-r--r--
Click to expand...
Click to collapse
Looks like i can't past it inside /system/lib because it keeps saying that the system is read only.
Should i Flash Avatar ROM so I have full control?

michalrobeck said:
Looks like i can't past it inside /system/lib because it keeps saying that the system is read only.
Should i Flash Avatar ROM so I have full control?
Click to expand...
Click to collapse
Of course, flash avatar rom or any other which grant you root acces or just root your stock rom, but if you still have that problem without changing ril it just will be a worthless effort.
If you still have that problem try this. Maybe it wil help. I know it is for fixing some kind of wifi-mobileinternet transation thing, but you can give it a try, you will lose nothing. Read carefully the post. I think there is nothing to worry about. I perfomed erase CAL numerous times without no problem. I would recommend putty instead of Hyper Terminal.

same problem
i am also facing the same problem
rom:- tonyp v4
kernal pengus 124
on same kernal but tonyp v3 rom this problem use never occur if tony or any pro can help me out i love his rom
:good: tonyp

bitdomo said:
Of course, flash avatar rom or any other which grant you root acces or just root your stock rom, but if you still have that problem without changing ril it just will be a worthless effort.
If you still have that problem try this. Maybe it wil help. I know it is for fixing some kind of wifi-mobileinternet transation thing, but you can give it a try, you will lose nothing. Read carefully the post. I think there is nothing to worry about. I perfomed erase CAL numerous times without no problem. I would recommend putty instead of Hyper Terminal.
Click to expand...
Click to collapse
Just a quick question do you know what erase CAL does? can i use it while flashing a stock rom with baseband?

michalrobeck said:
Just a quick question do you know what erase CAL does? can i use it while flashing a stock rom with baseband?
Click to expand...
Click to collapse
Erase CAL deletes the calibration data in the radio. By radio I mean that part of the phone which is responsible for catch signal/network. When you perform Erase CAL you lose your IMEI, but you can restore, that forum link I sent describe it how to restore your IMEI after erase CAL.
Answer to your second question: You can only use erase CAL when you flash baseband, and you need stock rom to restore your IMEI.
Why you need stock rom? You need stock rom because it has Hidden menu which is missing from custom roms. Hidden menu is essential to restore your IMEI.
You can find your IMEI on your phone's box or on the sticker under your battery, or type *#06# in the dialer and it will show your IMEI.

I suffered from this problem when I installed Kaspersky Anti-Virus. It automatically enabled its filter and I couldn't make or receive calls, depsite the signal strength or 2g/3g.I disabled the filter and it worked after that. Also, unrelated, but I also suffered from a problem where after a few calls/texts/switching data on/off, I would lose connectivity until the next reboot. I solved it by disabling automatic time and automatically setting the time using the clocksync application from the play store. Hope I helped, good luck.
Sent from my Optimus 2X using xda app-developers app

[HELP] Need LG Optimus 4X new baseband(v20c october 2014)

hello all. my phone shows "reorganizing internal processes" whenever i try to make a call. bcoz of this it is unusable as a phone.
also imei is null, baseband is unknown and cellular is in NO SERVICE.
nothing works: tried reboot,
other roms (cm 11, zaiben, mahdi etc..),GetRIL app...
also i tried to flash latest v20c but it always stuck at 10%..
but i can flash anything from cwm(philz touch)
so can anyone please help me with the so said baseband in cwm flashable format or a cwm backup of latest v20c update?
i'll be grateful to anyone who looks into this issue.
thanks in advance.:good::good:

Hi,
I will have your thread moved to your device section.
Good luck!

You will not find ant flashable format for cwm... I think, did you try to flash v20b? Only way to change you baseband is to flash firmware.

i"ll try upload you stock partitions to flash ***when i find some free time***

Marko055 said:
You will not find ant flashable format for cwm... I think, did you try to flash v20b? Only way to change you baseband is to flash firmware.
Click to expand...
Click to collapse
yes i tried flashing latest v20c and v20b.. but always stuck at 10%.. tried 3 different pcs and cables and latest method of kdz flashing too.. still no luck:crying:

Any updates on this?? anyone?

I just check on lg page, latest firmware for your country is v20A, so try to flash that.

Marko055 said:
I just check on lg page, latest firmware for your country is v20A, so try to flash that.
Click to expand...
Click to collapse
dude, i cant "FLASH". thats the problem

What about LG Mobile support tool? Connect phone via USB and wait for the tool recognizing it. In the menu you can "reset upgrade errors", the tool downloads latest version for your phone automatically and flashes itself.

Yeah, the 4X is nearly unbrickable. Even when nothing works, LG Mobile support tool can get it back with a stock rom.
I am in Portugal and have the same problem. I read in a different thread that the problem of "reorganizing internal processes" is in fact a crash of the phone/radio process, due to hardware bug that stucks when both voice and data communications are requested at the same time in a 3G network. I'm not sure if even V20C can correct the problem. One solution is to switch to 2G in general, (EDGE data speeds... )and you won't have problems, When needing for a particular download, switch temporarly to 3G.
But if anyone have a 3G stable solution, please share as I am also highly interested!
I tried stock JB. In custom CM roms, for instance 4.4.4 (is what I have now), you won't have a "reorganizing..." message, but you will loose completely mobile communications when the problem occurs, and only a phone reboot will recover it

SHA_NDY said:
What about LG Mobile support tool? Connect phone via USB and wait for the tool recognizing it. In the menu you can "reset upgrade errors", the tool downloads latest version for your phone automatically and flashes itself.
Click to expand...
Click to collapse
tried that already. it stops at 10%. says retry. no go.

ismayeel25 said:
tried that already. it stops at 10%. says retry. no go.
Click to expand...
Click to collapse
I did have sam problem wiht 10% thingy but I use the LGFlashtool2014 from the forum:
Code:
http://www.mediafire.com/download/wu50af8uh99air7/P880-Flashtools.rar
(credit to proper uploader, I dont remember where did I get it, sorry)
The problem causes by LG update software when you kdz from 20A to B or C.
about the IMEI the V20C not really solve my problem but it' sustainable.
Bests of luck.

Thanks. i'll try it.

any chance