Hi
My phone suddenly stopped detecting all sim cards ( I have tried various working sims ).
It is running CM 7.2 and has been running cm 7.2 for a few months with no problems.
Today I took out the sim and put it back in to reboot, all was fine. I went to shower, came back and the sim suddenly stopped being detected.
I have tried to google but it seems most problems are to do with flashing a new rom and having the sim not work, my case is that the rom has been the same for a few months.
I have tried to flash different roms and I still have the same problem. I have a gut feeling it is the hardware that reads the sim that is faulty.
I have read something about a baseband, I dont know what that is but if it helps, when i go to the settings and click on 'about phone'
It says there is a baseband and it is version something. There are no question marks or anything like that.
I appreciate the help and would love some more troubleshooting suggestions.
The worst case scenario is unrooting it, flashing stock rom and send it back to warranty. I actually don't know how to do that so if anyone has a guide lying around please link me on that.
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
asmerito said:
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
cimore000 said:
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
Click to expand...
Click to collapse
First you flash BB, then download RIL with GetRil. Read completely through BB sticky topic in development section. All answers are there.
http://forum.xda-developers.com/showthread.php?t=1658047
[Baseband][P990] Complete Baseband overview thread
Sent from my LG-P990 using xda app-developers app
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I checked the IMEI and it matches.
I have some extra information if it helps, when I choose a random RIL from getril, the battery might become a ? mark and the sim card not detected error doesnt show anymore, however when I put it back to the original RIL, my battery bar starts showing the 'power left' and also the sim not detecting error shows again.
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I get the SIM Toolkit Incompatible Handset error and then whether I press OK or Cancel, shortly after I lose mobile network access. I've been trying all manner of different things, Smart Flashing, NVflashing, changing basebands, Rils, you name it.
I'm currently on the V30B root ROM http://forum.xda-developers.com/showthread.php?t=2064793 and the Ril matches the baseband from that ROM, but that hasn't helped either. So I went and check the in phone and behind battery IMEI and they are different! I'd love to hear what your solution to this is!
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
My problem was no service and IMEI unknown... Never managed to solve it. Reverted to old bootloader and problem solved.
Sent from my LG-P990 using xda app-developers app
IMEI Solution
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
4) Install a program called Hyperterminal on your PC and open it. In COM settings select same port as in device manager -> LGE Mobile USB Seial Port (should be 115200)
5) Type at%imei and it should respond by saying OK
6) Now type at%imei and it should now display your current IMEI number.
7) Type at%imei=XXXXXXXXXXXXXXX where X is your original IMEI number.
8) Reset phone.
You might have to reboot your phone after step 3. But see if it works without.
I have been thinking that this is a hardware issue, I have not changed a single setting/rom/baseband at all, the sim just wasnt detecting when I came back to my phone. The rom and settings were the same for a number of months.
I am now going to give it in to warranty, however it only has 1 month left. I have tried to install the stock firmware but with no luck..
I found a rom to flash for my region, it is a zip file but when I try flash it with Clockworkmod, it says installation aborted....
Shouldnt I be able to flash the roms with CWM? The file is a zip file just like the CM7.2 rom I flashed. Do I need nvflash instead? I found the rom here :
http://forum.xda-developers.com/showthread.php?t=1852112 (the download links were removed so I googled the exact same rom)
I was also told that if I just use the LG update tool, it sohuld automatically update the phone to stock firmware AND unroot it, only that the update tool gives me an error. Whats the best approach guys?? I need to get this fixed before my warranty goes.
Custom40 said:
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu...
Click to expand...
Click to collapse
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
[-Stash-] said:
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
Click to expand...
Click to collapse
Trust me, you can try whatever you want. This is the only way to get it working. I spent hours and hours to figure this out, so I guarantee you it will work.
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
interr said:
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
Click to expand...
Click to collapse
Your imei should not show in settings, it should show in the back of your battery and when you dial : *#06# into the phone (where you dial numbers for calls).
Cant help you with baseband.
OP here, I am trying to unroot my phone and put stock firmware to get warranty to fix the simcard reader ( i believe it is a hardware issue ).
If I use nvflash and flash any stock firmware I can find on the internet, will that be OK? I have a feeling each region of optimus 2x has slight differences in firmware, eg swedish stock roms and australian stock roms may differ in the default applications etc.
Will it be ok to just install any kind of stock rom for my warranty? Help would be appreciated my warranty is running out in less than a month now.
I also tried to flash stock firmware with CMW, it didnt work. I am about to try NVflash, so I went into greater detail in page 1 but no one replied yet. If you guys know please help. I am more familiar with CMW than NVflash. I have not used NVflash yet.
hahah after 2 sleeples nights i menage to restore my sim to be recognize ,whit this metod,.. NFlash rulles ))
http://www.ibtimes.co.uk/articles/408044/20121124/unbrick-tool-lg-optimus-p990.htm
http://androidadvices.com/unbrick-lg-optimus-2x-p990-android-phone-tutorial/
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
this is also the best metod for unbricking your phone, .
INSTALLATION:
ATTENTION
The flasher with NVFlash clears all memory, including the Internal SD., so make a backup if u can..
Download this file: http://bayfiles.com/file/yKZL/eGZ31A/driver.rar The pack includes the APX driver (folder driver)
http://www.putlocker.com/file/4CEDEB7E0893B6F1
1.- Remove the battery to the phone.
2.- Press and hold Vol- and Vol+ and without releasing the 2 keys connect the USB cable to the PC
3.- Go to the progmaq-default-cm-10-20121105 folder and run flash icon... folow instruction., wait wait wait Enjoy!
Custom40 said:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
Click to expand...
Click to collapse
I managed to get an old CM7 install back on the p990,but the above is still not working for me :/
After I finish typing in 1809#*990# in dialer, nothing happens. If I press the green phone handset icon to dial that number it comes up with an error message of "Mobile network not available".
Any further advice? Thanks.
Okay, I failed at reading comprehension – it has to be an LG Gingerbread ROM for this code to work, NOT a CM-based one!
Trying one from somewhere-I-cannot-link-to-yet
Success! Once I was back on the original stock LG Gingerbread ROM, I could reset the IMEI and make/receive calls again using this method. Thank you very much!
Now all flashed back onto a nice "working" nightly CM10.1 and a very happy little device.
Many thanks all.
Hi,
Anyone have a working link to "progmaq-default-cm-10-20121105 ". My Optimus 2x has been bricked as well, and can't find any other version of this on Google unfortunately
Appreciate all help.
Related
hi all
i thought i would attempt to flash my samsung s with the new beta froyo update.
i followed this guys tutorial.
( cant link to it sorry its the noobs guide with detailed instructions through kies and odin)
i used the odin approach
i managed to root the phone.
on reboot it asked for an unlock code (o2 uk) so i went on to try and follow the steps about unlocking it. which neither worked all the way through the steps.
on reboot it appears to have signal and in the about section it says i am onnected to the o2 network but when i try to make a call is says "data network not available with an ok button, which when pressed will return you to the ome screen.
any help would be greatly appreciated thanks
Almost the same problem,
installed 2.2 update successfully, the phone worked for like 3-4 days very well and after that today i discovered "Emergency calls only"
so the question now is did i bought phone which later was reported stolen? or somehow i broke it?
Anyone have any idea?
hmmm, I have the same problem! In the status menu, the number is shown, but the network, says "unknown"
Hi! I have this exact same problem except I was unlocking my phone using this tutorial:
http://forum.xda-developers.com/showthread.php?t=906255
But I didn't back up my Efs folder, now my phone is unlocked but when I put a sim card in it I have very little network and when I try to make a call I get " NO DATA NETWORK AVAILABLE".
I've tried everything but I don't know what to do!
I was thinking of two ways to fix it:
1. Reinstall froyo (not quite sure how using the samsung software as my laptop oesn't recognised the phone as a pone)
2. Downgrade to, get unlock code using market app and then upgrade to froyo again.
I know I messed up but now I really need to fix this.
Can someone PLEASE PLEASE help me out.
mistress_gi said:
Hi! I have this exact same problem except I was unlocking my phone using this tutorial:
http://forum.xda-developers.com/showthread.php?t=906255
But I didn't back up my Efs folder, now my phone is unlocked but when I put a sim card in it I have very little network and when I try to make a call I get " NO DATA NETWORK AVAILABLE".
I've tried everything but I don't know what to do!
I was thinking of two ways to fix it:
1. Reinstall froyo (not quite sure how using the samsung software as my laptop oesn't recognised the phone as a pone)
2. Downgrade to, get unlock code using market app and then upgrade to froyo again.
I know I messed up but now I really need to fix this.
Can someone PLEASE PLEASE help me out.
Click to expand...
Click to collapse
might need to change the modem in odin i think. just heard about it
did u try restarting the phone... just a wild guess...
I had the same issue before and was puzzled. Its actually a very simple solution:
1. Re-lock your phone, search through xda there is a code you have to enter
2. Unlock your phone
All done! Surprisingly easy
Try the Odin method in block 2 back to Eclair if ok then upgrade to Froyo .
http://forum.xda-developers.com/showthread.php?t=818556
However your non connection might be due to not flashing a firmware with your network settings in which case manual settings of APN .
If your IMEI has changed due to flashing and you did not back up your EFS folder then little hope but do a google / search of XDA as some have reported success .
jje
Emergency calls only
I had a custom rom that was giving that to me too. I think it means that you can access a network different from your sim (because usually emerg calls can be made from any phone I think?).
I'd try and find a rom that is optimized for your carrier or at least a modem file from a stock rom that is for your carrier. You may also need to reselect the APN settings (or enter them for your carrier). Its under settings/wireless and network/Mobile networks/access point names (use the menu button to add an APN).
you could also try re downloading and flashing the rom to make sure that is the issue. Mine said it installed OK but never booted up, redownloaded and reflashed and then it was fine but the install screens looked identical.
G
Hi! Thank you so much for everyone's replies!
My IMEI isn't changed and someone helped me check my efs files and they are all ok. I'm going to try and reflash froyo through the samsung software to see if the network lock comes back and then try to unlock again. For this I'm going to unroot the phone and follow samsungs' instructions.
I'm afraid to relock the phone as there are reports that say it completely messes everything up!
But I'll keep you guys posted! Wish me luck!!!!
PS. Any other suggestions are more than welcome!
So, a quick update on my situation.
I uninstalled busybox and unrooted my phone using the oneclick root tool.
Did a factory format and, surprise surprise, my phone now works perfectly!
Apart from the fact that it doesn't connect to kies, but that's a whole another issue!
Tank you so much to all of you who answered my cry for help!
Gi
Hello,
I have searched multiple forums for hours today and have figured out what is going on with my HTC Vivid. (It has been upgraded to AT&T Official ICS.)
It was working fine up until yesterday where it was not receiving a signal from the mobile network and the signal icon has an X through it. The SIM card is properly inserted and another SIM card has been tried as well. Looking through other threads it seems like the Radio RIL files may be missing or corrupt. The IMEI number and *#06# code does not show an IMEI number either. The baseband version says unknown. I am not sure what happened as I have never loaded any other ROM on it.
I downloaded the Official RUU ICS upgrade ROM today and tried reflashing it, with no luck.
What is interesting (and the other person who had the radio problem) is that when I left the phone sit off overnight and then turned it on in the morning, the phone connected to the mobile network and I had a signal. When I restarted the phone, hours later, the phone lost connection to the mobile network and that is when I started digging and found the problem with the baseband version being unknown.
Is there anything anyone can suggest? Can I reflash the baseband files or copy them from someone somehow using ADB? It seems like there is where my problem lays. I've searched for ways on how to downgrade from ICS to the official GB stock rom, but it doesn't seem like it can be accomplished.
(I tried downloading the Holiday Cingular version of the GB stock rom but the update failed. I read about the ICS HBOOT version being different and not allowing it.)
Thank you in advance for helping and any suggestions.
Have you gotten a new sim card yet? That needs to be your first step. My captivate did the same thing and turned out the sim went bad
Sent from my HTC PH39100 using Tapatalk 2
Cor-master said:
Have you gotten a new sim card yet? That needs to be your first step. My captivate did the same thing and turned out the sim went bad
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
Yes I have tried a different sim card. I don't believe thats the issue though being that it worked with the same sim after I let the phone sit overnight. From reading about others experience, it doesn't seem that the sim is the issue but more the baseband version and imei information missing.
centro7710 said:
Hello,
I have searched multiple forums for hours today and have figured out what is going on with my HTC Vivid. (It has been upgraded to AT&T Official ICS.)
It was working fine up until yesterday where it was not receiving a signal from the mobile network and the signal icon has an X through it. The SIM card is properly inserted and another SIM card has been tried as well. Looking through other threads it seems like the Radio RIL files may be missing or corrupt. The IMEI number and *#06# code does not show an IMEI number either. The baseband version says unknown. I am not sure what happened as I have never loaded any other ROM on it.
I downloaded the Official RUU ICS upgrade ROM today and tried reflashing it, with no luck.
What is interesting (and the other person who had the radio problem) is that when I left the phone sit off overnight and then turned it on in the morning, the phone connected to the mobile network and I had a signal. When I restarted the phone, hours later, the phone lost connection to the mobile network and that is when I started digging and found the problem with the baseband version being unknown.
Is there anything anyone can suggest? Can I reflash the baseband files or copy them from someone somehow using ADB? It seems like there is where my problem lays. I've searched for ways on how to downgrade from ICS to the official GB stock rom, but it doesn't seem like it can be accomplished.
(I tried downloading the Holiday Cingular version of the GB stock rom but the update failed. I read about the ICS HBOOT version being different and not allowing it.)
Thank you in advance for helping and any suggestions.
Click to expand...
Click to collapse
I had a similar problem and thought I solved it, but I later realised all my "solutions" didn't bring back the network but coincided with its reappearing cos no same "solution" worked more than once.
It's a very weird problem as the network shows up once in a while and when I'm using Mobile Network for Data, my phone hangs again and the IMEI, Network, baseband disappears on reboot...till further notice. I gave up trying and concluded it's either a bad modem (hardware) or something AT&T knows about!
You can get HBOOTS for both GB and ICS via Hasoons AIO kit
Flash the HBOOT, Flash the Image from Cingular GB RUU and I wish you luck!!!
ayulatins said:
I had a similar problem and thought I solved it, but I later realised all my "solutions" didn't bring back the network but coincided with its reappearing cos no same "solution" worked more than once.
It's a very weird problem as the network shows up once in a while and when I'm using Mobile Network for Data, my phone hangs again and the IMEI, Network, baseband disappears on reboot...till further notice. I gave up trying and concluded it's either a bad modem (hardware) or something AT&T knows about!
You can get HBOOTS for both GB and ICS via Hasoons AIO kit
Flash the HBOOT, Flash the Image from Cingular GB RUU and I wish you luck!!!
Click to expand...
Click to collapse
I found the download link, but the website says they're updating their drives, so who knows how much longer that will take.
Also, are you saying I should just use the tools within the kit to flash the HBOOT back to the previous version compatible with GB and then flash the RUU GB image after? Can I do that with the phone connected via USB or does it have to be flashed from the SD card? If it has to be flashed from the SD card, how do I go about doing that? If it can be done from the phone via USB, does the phone have to be in recovery mode?
I have tried reflashing the ICS RUU multiple times w/ version 3.26.502.52 and 3.26.502.56, both do not fix the issue. Do the baseband and or radio files NOT get flashed within these updates?
Thanks for the response!
centro7710 said:
I tried finding a download link for the AIO kit on the link provided, but I must be blind?
Also, are you saying I should just use the tools within the kit to flash the HBOOT back to the previous version compatible with GB and then flash the RUU GB image after? Can I do that with the phone connected via USB or does it have to be flashed from the SD card? If it has to be flashed from the SD card, how do I go about doing that? If it can be done from the phone via USB, does the phone have to be in recovery mode?
I have tried reflashing the ICS RUU multiple times w/ version 3.26.502.52 and 3.26.502.56, both do not fix the issue. Do the baseband and or radio files NOT get flashed within these updates?
Thanks for the response!
Click to expand...
Click to collapse
For any issues downloading Hasoon AIO tool, please use his thread (earlier provided).
Yes, use the AIO tool to flash GB HBOOT or read the SUPERGUIDE
and obtain rom.zip from the Cingular RUU
I don't know how to flash RUU via Recovery [email protected]@@!!!
I'd advice you follow my first solution here!!!
ayulatins said:
For any issues downloading Hasoon AIO tool, please use his thread (earlier provided).
Yes, use the AIO tool to flash GB HBOOT or read the SUPERGUIDE
and obtain rom.zip from the Cingular RUU
I don't know how to flash RUU via Recovery [email protected]@@!!!
I'd advice you follow my first solution here!!!
Click to expand...
Click to collapse
Thanks for the quick reply.
Your thread was the one I saw earlier with the simliar problem that I am having, only I have not loaded any custom ROMS. The phone just stopped receiving the signal the other day. I am still waiting for the download website to become available to use the tool to perform the flash of HBOOT, however, once I do that, will that erase the ICS rom from my phone? If so, what steps do I have to perform to get it in a "download mode" to accept the AT&T GB RUU? I'm a little confused on that part.
I read your first thread and I am a bit confused on exactly how you were able to correct the baseband/RIL issue (which I am assuming is the root of my issue). Do I have to extract some files from the RUU executable? Are the commands you provided to be used in ADB? I am confused as to what to do with [setprop ro.baseband 3.26.5XXX (<--- mainver: in android-info.txt in RUU.zip)] from your post. If that command is copying a file or just setting information (almost like as a registry setting within Windows) to point to the file or set a version number. Also if the XXX needs to have a certain number.
I thank you for your time and am trying my hardest to understand what to do to accomplish these steps.
centro7710 said:
Thanks for the quick reply.
Your thread was the one I saw earlier with the simliar problem that I am having, only I have not loaded any custom ROMS. The phone just stopped receiving the signal the other day. I am still waiting for the download website to become available to use the tool to perform the flash of HBOOT, however, once I do that, will that erase the ICS rom from my phone? If so, what steps do I have to perform to get it in a "download mode" to accept the AT&T GB RUU? I'm a little confused on that part.
I read your first thread and I am a bit confused on exactly how you were able to correct the baseband/RIL issue (which I am assuming is the root of my issue). Do I have to extract some files from the RUU executable? Are the commands you provided to be used in ADB? I am confused as to what to do with [setprop ro.baseband 3.26.5XXX (<--- mainver: in android-info.txt in RUU.zip)] from your post. If that command is copying a file or just setting information (almost like as a registry setting within Windows) to point to the file or set a version number. Also if the XXX needs to have a certain number.
I thank you for your time and am trying my hardest to understand what to do to accomplish these steps.
Click to expand...
Click to collapse
I did find the extracted files within the RUU executable and found the rom.zip which included the .img files among other files I assume needed as sources to flash the phone. I see a radio.img file would I be able to do anything with that?
Thank you.
centro7710 said:
I did find the extracted files within the RUU executable and found the rom.zip which included the .img files among other files I assume needed as sources to flash the phone. I see a radio.img file would I be able to do anything with that?
Thank you.
Click to expand...
Click to collapse
And I have a question, if the radio/baseband files are included in the RUU flash, what is happening as to why it is not being reflashed, or if it is being reflashed, why it is disabling the mobile network and providing an Unknown version to Baseband and clearing the IMEI number?
ayulatins said:
For any issues downloading Hasoon AIO tool, please use his thread (earlier provided).
Yes, use the AIO tool to flash GB HBOOT or read the SUPERGUIDE
and obtain rom.zip from the Cingular RUU
I don't know how to flash RUU via Recovery [email protected]@@!!!
I'd advice you follow my first solution here!!!
Click to expand...
Click to collapse
Here's where I am:
I successfully unlocked my bootloader, downgraded to GB, rooted. Tried to gain root access through adb terminal but it was not working properly.
I relocked my bootloader. Installed the ICS RUU AT&T ROM update. Unlocked my bootloader, rooted.
I see the commands you ran in your previous post. I am also receiving the same message of N/A when running the getprop ro.baseband
I tried the second command setprop ro.baseband 3.26.5XXX and then restarted the phone. I have tried it as posted, and also with swapping out the version that is located in my android-info.txt file: 3.26.502.56
Still no luck with setting the baseband version. IMEI still is cleared out.
Am I doing something wrong?
ayulatins said:
I had a similar problem and thought I solved it, but I later realised all my "solutions" didn't bring back the network but coincided with its reappearing cos no same "solution" worked more than once.
It's a very weird problem as the network shows up once in a while and when I'm using Mobile Network for Data, my phone hangs again and the IMEI, Network, baseband disappears on reboot...till further notice. I gave up trying and concluded it's either a bad modem (hardware) or something AT&T knows about!
Click to expand...
Click to collapse
Please see my initial quotes above...
All the previous steps I took were only a coincidence (not proven to work)!!!
We may need to contact AT&T to be sure its not a lock IMEI (and I'm wondering why it would be) or an experienced Dev
ayulatins said:
Please see my initial quotes above...
All the previous steps I took were only a coincidence (not proven to work)!!!
We may need to contact AT&T to be sure its not a lock IMEI (and I'm wondering why it would be) or an experienced Dev
Click to expand...
Click to collapse
Hey thanks for all of your suggestions. I contacted AT&T the day everything happened to see if it was on the block list. They said no. I tried multiple things including trying to re-flash the radio, but I was getting a signature failed error that I could not get around. I really think that's what the problem is. I gave up and ended up selling it.
centro7710 said:
Hey thanks for all of your suggestions. I contacted AT&T the day everything happened to see if it was on the block list. They said no. I tried multiple things including trying to re-flash the radio, but I was getting a signature failed error that I could not get around. I really think that's what the problem is. I gave up and ended up selling it, as is, on ebay instead to get a few bucks out of it and getting a new phone.
Click to expand...
Click to collapse
I really wouldn't mind selling mine too if I get a buyer. I'm just tired of all the troubles and no dev is willing to help.
ayulatins said:
I really wouldn't mind selling mine too if I get a buyer. I'm just tired of all the troubles and no dev is willing to help.
Click to expand...
Click to collapse
Exactly. It was my sister's phone. The sh*tty thing is we bought two off of ebay at the same time, 1 for me, 1 for her. Well, her phone was not in the box (either never shipped or stolen) so I had to file a claim through eBay which took 3 weeks to get the money back. Meanwhile, I gave her my phone (which is the phone in reference) to use instead. I bought her an iPhone instead now, along with purchasing one myself. I loved Android, but the bugs and fragmentation is getting too much for me to handle.
Dude, if you don't have an IMEI showing up, something is WAY wrong. That goes beyone the RIL not working... The RIL is probably fine. If your phone doesn't have an IMEI somehow, the cell towers are NOT, NO WAY, NEVER EVER going to register your phone on their network. You can put a billion SIM cards in there, or flash a billion stock ROMS, and if you don't have an IMEI, you will never be able to connect.
Something is probably corrupt or broken in your firmware or the hardware itself. I think your device is probably screwed.
My advice, is follow the steps to put your phone back to stock (including changing the bootloader message back to **LOCKED** and S-ON), and get it back to the phone company. They will be able to tell something is boned on the phone right away since it isn't displaying an IMEI.
Sorry to be the bearer of bad news and for your many wasted hours... But on the plus side, you now know a LOT about flashing and how your phone works now
Good luck with everything man! Hope they get you up and running soon!
I have the same problem as the OP but I have a IMEI showing up and a Basehand But won't connect to AT&T or anything they resent me a Signal & everything it shows a X with no bars it happened after I did a Factory Reset
anyone got the Radio.img?
inick73376 said:
I have the same problem as the OP but I have a IMEI showing up and a Basehand But won't connect to AT&T or anything they resent me a Signal & everything it shows a X with no bars it happened after I did a Factory Reset
Click to expand...
Click to collapse
That's weird..you try creating the apns again? I don't see how a factory reset would do that. Try toggling airplane mode too
Sent from my De-Sensed HTC Vivid using xda premium
I am currently having the same issues right now, it works if i leave the phone off for 1 hr it will work until i reboot then its down again, tried every thing possible, airplane mode will crash, reflashing the radios from gb and ics does nothing, setprop does nothing really. from this point it feels like a hardware issue.
sorry to revive an old thread, i just wanted to know if anyone came across this issue and had it fixed
i will get a log to see if there is errors showing up
Return it.
Sent from my HTC Holiday using Tapatalk 2
Hi I recently bought this phone off kijiji and the guy I bought it off didn't know what he was doing when it came to rooting and such, he bricked it on apx service mode but i fixed it eventually. the problem now is that it wont read my sim, it always says "error while searching for networks" and another thing is that it wont show my battery percentage. could it be my kernal or what, I really need help!
LiLTrippz said:
Hi I recently bought this phone off kijiji and the guy I bought it off didn't know what he was doing when it came to rooting and such, he bricked it on apx service mode but i fixed it eventually. the problem now is that it wont read my sim, it always says "error while searching for networks" and another thing is that it wont show my battery percentage. could it be my kernal or what, I really need help!
Click to expand...
Click to collapse
hello there....
1) first check whether u have a matching BB/RIL.
2) Its better u go back to stock. to do this i would suggest u flash a stock rom for your country from this thread (using smart flash ofcourse).
If u want to root it then proceed to next step. if not then look for signal....no signal? then proceed to step 6
3) next root it using superoneclick (here u go!).
4) Then download BB(baseband) from here and flash it.
5) Then download get ril app from play store and check for BB/ril match. if not matching then download the ril which are ticked. (if u are using GB go for v20 and for froyo v10 series). restart.
Still no network???
6) check with another sim of different operator.
still no network???
7) Check whether your imei number matches with the one on back of your phone. (sometimes wrongly flashed roms would have changed imei...happened to me!!)
if its different then follow instructions from here.
(ALWAYS BACKUP)
Hello,
I've got a Galaxy Note, which a mate gave to me, because he has the new Note 2 now.
He said that he has some network problems (he has two times vodafone.cz), but didn't say anything in detail. So I thought the problem would be solved with flashing another rom, like CM 9.1. He already had the stock 4.0.4 and I read that I have to flash back to GB before flashing to CM 9.1.
At first I made a backup of the efs folder with kTool. After that I flashed the LC1 version of GB (3 parts, open Europe) but with this flashing process, I lost my IMEI ! So I wanted to restore the efs folder with kTool again, but it didn't work for me, I still had no IMEI.
I thought that the structure of the efs folder could have changed from 3.6 to 4.0.4 and that this would be the reason why I can't restore the efs folder. Therefore I flashed back to a Samsung stock rom of Android 4.0.4 (N7000XXLRG_N7000DBTLRG_DBT).
And then the surprise: I had my IMEI back, without restoring the efs folder!
This just was the background. Now to my problem: I still can't connect to the mobile network. In the notification bar is written "emergency calls only" (I don't know if it is translated on the right way, because I'm from germany). If I go to the network settings and search for mobile networks, I find all the networks I reach in my area, o2-de as well, which is my favourite network. But if I want to register to the network, it takes a while and then it says: Registration failed. And after that, I also can't make emergency calls, there is written "No service"
All in all my question is: Why am I able to find networks, but can't register to my one? I also tested it with other SIM-cards from other providers, but it still does not work..
I hope anyone of you has a solution for my issue.
greetings
Senfy
Edit: My IMEI begins with 359, so it should not be a developer IMEI
May be it has network lock. Have you tried apps like galaxy s unlock from the play store.
I tested it now, but everytime I want to unlock my phone, I loose my IMEI and I have to restore the efs folder..
But if I open Galaxsim Unlock, it says my device isn't locked.. so this seems to be not the solution..
Now I flashed to CM 9.1 with the hope to solve this problem.. CM 9.1 works, but I still can not register to my network... has anyone another idea how to solve this problem ??
Are you check an eyes in code or test menu ?
Go in dialer and tape
*#0011#
Then use menu and back in menu to come on general and check in different menu(debug)
I'm sorry I don't understand you. If I dial this code nothing happens. I also searched for this code (google) but without any result.
maybe you could post a link with an exact description how to do what you mean..
But thanks for your effort.
Now I wanted to flash another modem.. but everytime I want to flash it, I lose my IMEI !
The only way to get my IMEI back is to flash back to N7000XXLRG_N7000DBTLRG_DBT ...
I don't know what to do next.. I would be glad if someone could help me..
Edit: What I forgot to tell you: The reception of emergency calls goes up and down over the time.. maybe someone of you can conclude anything out of this information..
Doesn't anyone have an idea how to solve this problem?
how are you flashing the modem? tried mobile odin?
I flashed the whole GB (3 parts) with PC Odin and the actuall modem with mobile Odin but with no success..
Where is da solution 2 no network after update
Sent from my GT-N7100 using xda app-developers app
Well i got a problem.
My LG optimus 2x doesn't want to make when it has full signal. And that's ONLY when it has full signal. As soon as I start calling it says call ended. Other people can't call me either. Everything else works fine from internet to messaging (receiving and sending). I have tried numerous basebands (0725 v20q, 0725 v10d, 0218 v10b) and the one I'm on now which is V30A.
I'm currently running stock LG 4.04.
I have tried the phone with a different sim and it still didn't make calls.
Switching to 2G or turning airplane mode on/off doesn't help neither doe turning on wcdma or gsm only signal.
I was installing the basebands with LG P990 All in one ToolKit.
ANY HELP GUYS.
Thanks
Switch to a custom rom ^^
Already tried it doesn't help. I will flash Avatar ROM again but first i want to fix this
Nobody knows? I don't think it hardware since the phone can make calls but only when its not on full signal.
Could it be IMEI problem?
Have you tried a different sim card?
Dial *#06# and see if your imei appears
IMEI problem what do you mean by that?
The IMEI does come up.
And yes i have tried different sim cards with the same result.
Does the displayed imei match with the one printed on the sticker under the battery?
Yep they match.
You have the problem which I had when I was using su660 basebands. As I see you were trying p990 basebands maybe you cold try a su660 baseband. Here's the su660 baseband with it's ril Flash the bb with smartflash, then if you are on stock or stock based rom copy the ril file to /system/lib and set the ril permisson to rw-r--r--
Will try. I'll post back if it works or not.
bitdomo said:
You have the problem which I had when I was using su660 basebands. As I see you were trying p990 basebands maybe you cold try a su660 baseband. Here's the su660 baseband with it's ril Flash the bb with smartflash, then if you are on stock or stock based rom copy the ril file to /system/lib and set the ril permisson to rw-r--r--
Click to expand...
Click to collapse
Looks like i can't past it inside /system/lib because it keeps saying that the system is read only.
Should i Flash Avatar ROM so I have full control?
michalrobeck said:
Looks like i can't past it inside /system/lib because it keeps saying that the system is read only.
Should i Flash Avatar ROM so I have full control?
Click to expand...
Click to collapse
Of course, flash avatar rom or any other which grant you root acces or just root your stock rom, but if you still have that problem without changing ril it just will be a worthless effort.
If you still have that problem try this. Maybe it wil help. I know it is for fixing some kind of wifi-mobileinternet transation thing, but you can give it a try, you will lose nothing. Read carefully the post. I think there is nothing to worry about. I perfomed erase CAL numerous times without no problem. I would recommend putty instead of Hyper Terminal.
same problem
i am also facing the same problem
rom:- tonyp v4
kernal pengus 124
on same kernal but tonyp v3 rom this problem use never occur if tony or any pro can help me out i love his rom
:good: tonyp
bitdomo said:
Of course, flash avatar rom or any other which grant you root acces or just root your stock rom, but if you still have that problem without changing ril it just will be a worthless effort.
If you still have that problem try this. Maybe it wil help. I know it is for fixing some kind of wifi-mobileinternet transation thing, but you can give it a try, you will lose nothing. Read carefully the post. I think there is nothing to worry about. I perfomed erase CAL numerous times without no problem. I would recommend putty instead of Hyper Terminal.
Click to expand...
Click to collapse
Just a quick question do you know what erase CAL does? can i use it while flashing a stock rom with baseband?
michalrobeck said:
Just a quick question do you know what erase CAL does? can i use it while flashing a stock rom with baseband?
Click to expand...
Click to collapse
Erase CAL deletes the calibration data in the radio. By radio I mean that part of the phone which is responsible for catch signal/network. When you perform Erase CAL you lose your IMEI, but you can restore, that forum link I sent describe it how to restore your IMEI after erase CAL.
Answer to your second question: You can only use erase CAL when you flash baseband, and you need stock rom to restore your IMEI.
Why you need stock rom? You need stock rom because it has Hidden menu which is missing from custom roms. Hidden menu is essential to restore your IMEI.
You can find your IMEI on your phone's box or on the sticker under your battery, or type *#06# in the dialer and it will show your IMEI.
I suffered from this problem when I installed Kaspersky Anti-Virus. It automatically enabled its filter and I couldn't make or receive calls, depsite the signal strength or 2g/3g.I disabled the filter and it worked after that. Also, unrelated, but I also suffered from a problem where after a few calls/texts/switching data on/off, I would lose connectivity until the next reboot. I solved it by disabling automatic time and automatically setting the time using the clocksync application from the play store. Hope I helped, good luck.
Sent from my Optimus 2X using xda app-developers app