HTC Vivid Radio/Baseband issue - HTC Vivid, Raider, Velocity

Hello,
I have searched multiple forums for hours today and have figured out what is going on with my HTC Vivid. (It has been upgraded to AT&T Official ICS.)
It was working fine up until yesterday where it was not receiving a signal from the mobile network and the signal icon has an X through it. The SIM card is properly inserted and another SIM card has been tried as well. Looking through other threads it seems like the Radio RIL files may be missing or corrupt. The IMEI number and *#06# code does not show an IMEI number either. The baseband version says unknown. I am not sure what happened as I have never loaded any other ROM on it.
I downloaded the Official RUU ICS upgrade ROM today and tried reflashing it, with no luck.
What is interesting (and the other person who had the radio problem) is that when I left the phone sit off overnight and then turned it on in the morning, the phone connected to the mobile network and I had a signal. When I restarted the phone, hours later, the phone lost connection to the mobile network and that is when I started digging and found the problem with the baseband version being unknown.
Is there anything anyone can suggest? Can I reflash the baseband files or copy them from someone somehow using ADB? It seems like there is where my problem lays. I've searched for ways on how to downgrade from ICS to the official GB stock rom, but it doesn't seem like it can be accomplished.
(I tried downloading the Holiday Cingular version of the GB stock rom but the update failed. I read about the ICS HBOOT version being different and not allowing it.)
Thank you in advance for helping and any suggestions.

Have you gotten a new sim card yet? That needs to be your first step. My captivate did the same thing and turned out the sim went bad
Sent from my HTC PH39100 using Tapatalk 2

Cor-master said:
Have you gotten a new sim card yet? That needs to be your first step. My captivate did the same thing and turned out the sim went bad
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
Yes I have tried a different sim card. I don't believe thats the issue though being that it worked with the same sim after I let the phone sit overnight. From reading about others experience, it doesn't seem that the sim is the issue but more the baseband version and imei information missing.

centro7710 said:
Hello,
I have searched multiple forums for hours today and have figured out what is going on with my HTC Vivid. (It has been upgraded to AT&T Official ICS.)
It was working fine up until yesterday where it was not receiving a signal from the mobile network and the signal icon has an X through it. The SIM card is properly inserted and another SIM card has been tried as well. Looking through other threads it seems like the Radio RIL files may be missing or corrupt. The IMEI number and *#06# code does not show an IMEI number either. The baseband version says unknown. I am not sure what happened as I have never loaded any other ROM on it.
I downloaded the Official RUU ICS upgrade ROM today and tried reflashing it, with no luck.
What is interesting (and the other person who had the radio problem) is that when I left the phone sit off overnight and then turned it on in the morning, the phone connected to the mobile network and I had a signal. When I restarted the phone, hours later, the phone lost connection to the mobile network and that is when I started digging and found the problem with the baseband version being unknown.
Is there anything anyone can suggest? Can I reflash the baseband files or copy them from someone somehow using ADB? It seems like there is where my problem lays. I've searched for ways on how to downgrade from ICS to the official GB stock rom, but it doesn't seem like it can be accomplished.
(I tried downloading the Holiday Cingular version of the GB stock rom but the update failed. I read about the ICS HBOOT version being different and not allowing it.)
Thank you in advance for helping and any suggestions.
Click to expand...
Click to collapse
I had a similar problem and thought I solved it, but I later realised all my "solutions" didn't bring back the network but coincided with its reappearing cos no same "solution" worked more than once.
It's a very weird problem as the network shows up once in a while and when I'm using Mobile Network for Data, my phone hangs again and the IMEI, Network, baseband disappears on reboot...till further notice. I gave up trying and concluded it's either a bad modem (hardware) or something AT&T knows about!
You can get HBOOTS for both GB and ICS via Hasoons AIO kit
Flash the HBOOT, Flash the Image from Cingular GB RUU and I wish you luck!!!

ayulatins said:
I had a similar problem and thought I solved it, but I later realised all my "solutions" didn't bring back the network but coincided with its reappearing cos no same "solution" worked more than once.
It's a very weird problem as the network shows up once in a while and when I'm using Mobile Network for Data, my phone hangs again and the IMEI, Network, baseband disappears on reboot...till further notice. I gave up trying and concluded it's either a bad modem (hardware) or something AT&T knows about!
You can get HBOOTS for both GB and ICS via Hasoons AIO kit
Flash the HBOOT, Flash the Image from Cingular GB RUU and I wish you luck!!!
Click to expand...
Click to collapse
I found the download link, but the website says they're updating their drives, so who knows how much longer that will take.
Also, are you saying I should just use the tools within the kit to flash the HBOOT back to the previous version compatible with GB and then flash the RUU GB image after? Can I do that with the phone connected via USB or does it have to be flashed from the SD card? If it has to be flashed from the SD card, how do I go about doing that? If it can be done from the phone via USB, does the phone have to be in recovery mode?
I have tried reflashing the ICS RUU multiple times w/ version 3.26.502.52 and 3.26.502.56, both do not fix the issue. Do the baseband and or radio files NOT get flashed within these updates?
Thanks for the response!

centro7710 said:
I tried finding a download link for the AIO kit on the link provided, but I must be blind?
Also, are you saying I should just use the tools within the kit to flash the HBOOT back to the previous version compatible with GB and then flash the RUU GB image after? Can I do that with the phone connected via USB or does it have to be flashed from the SD card? If it has to be flashed from the SD card, how do I go about doing that? If it can be done from the phone via USB, does the phone have to be in recovery mode?
I have tried reflashing the ICS RUU multiple times w/ version 3.26.502.52 and 3.26.502.56, both do not fix the issue. Do the baseband and or radio files NOT get flashed within these updates?
Thanks for the response!
Click to expand...
Click to collapse
For any issues downloading Hasoon AIO tool, please use his thread (earlier provided).
Yes, use the AIO tool to flash GB HBOOT or read the SUPERGUIDE
and obtain rom.zip from the Cingular RUU
I don't know how to flash RUU via Recovery [email protected]@@!!!
I'd advice you follow my first solution here!!!

ayulatins said:
For any issues downloading Hasoon AIO tool, please use his thread (earlier provided).
Yes, use the AIO tool to flash GB HBOOT or read the SUPERGUIDE
and obtain rom.zip from the Cingular RUU
I don't know how to flash RUU via Recovery [email protected]@@!!!
I'd advice you follow my first solution here!!!
Click to expand...
Click to collapse
Thanks for the quick reply.
Your thread was the one I saw earlier with the simliar problem that I am having, only I have not loaded any custom ROMS. The phone just stopped receiving the signal the other day. I am still waiting for the download website to become available to use the tool to perform the flash of HBOOT, however, once I do that, will that erase the ICS rom from my phone? If so, what steps do I have to perform to get it in a "download mode" to accept the AT&T GB RUU? I'm a little confused on that part.
I read your first thread and I am a bit confused on exactly how you were able to correct the baseband/RIL issue (which I am assuming is the root of my issue). Do I have to extract some files from the RUU executable? Are the commands you provided to be used in ADB? I am confused as to what to do with [setprop ro.baseband 3.26.5XXX (<--- mainver: in android-info.txt in RUU.zip)] from your post. If that command is copying a file or just setting information (almost like as a registry setting within Windows) to point to the file or set a version number. Also if the XXX needs to have a certain number.
I thank you for your time and am trying my hardest to understand what to do to accomplish these steps.

centro7710 said:
Thanks for the quick reply.
Your thread was the one I saw earlier with the simliar problem that I am having, only I have not loaded any custom ROMS. The phone just stopped receiving the signal the other day. I am still waiting for the download website to become available to use the tool to perform the flash of HBOOT, however, once I do that, will that erase the ICS rom from my phone? If so, what steps do I have to perform to get it in a "download mode" to accept the AT&T GB RUU? I'm a little confused on that part.
I read your first thread and I am a bit confused on exactly how you were able to correct the baseband/RIL issue (which I am assuming is the root of my issue). Do I have to extract some files from the RUU executable? Are the commands you provided to be used in ADB? I am confused as to what to do with [setprop ro.baseband 3.26.5XXX (<--- mainver: in android-info.txt in RUU.zip)] from your post. If that command is copying a file or just setting information (almost like as a registry setting within Windows) to point to the file or set a version number. Also if the XXX needs to have a certain number.
I thank you for your time and am trying my hardest to understand what to do to accomplish these steps.
Click to expand...
Click to collapse
I did find the extracted files within the RUU executable and found the rom.zip which included the .img files among other files I assume needed as sources to flash the phone. I see a radio.img file would I be able to do anything with that?
Thank you.

centro7710 said:
I did find the extracted files within the RUU executable and found the rom.zip which included the .img files among other files I assume needed as sources to flash the phone. I see a radio.img file would I be able to do anything with that?
Thank you.
Click to expand...
Click to collapse
And I have a question, if the radio/baseband files are included in the RUU flash, what is happening as to why it is not being reflashed, or if it is being reflashed, why it is disabling the mobile network and providing an Unknown version to Baseband and clearing the IMEI number?

ayulatins said:
For any issues downloading Hasoon AIO tool, please use his thread (earlier provided).
Yes, use the AIO tool to flash GB HBOOT or read the SUPERGUIDE
and obtain rom.zip from the Cingular RUU
I don't know how to flash RUU via Recovery [email protected]@@!!!
I'd advice you follow my first solution here!!!
Click to expand...
Click to collapse
Here's where I am:
I successfully unlocked my bootloader, downgraded to GB, rooted. Tried to gain root access through adb terminal but it was not working properly.
I relocked my bootloader. Installed the ICS RUU AT&T ROM update. Unlocked my bootloader, rooted.
I see the commands you ran in your previous post. I am also receiving the same message of N/A when running the getprop ro.baseband
I tried the second command setprop ro.baseband 3.26.5XXX and then restarted the phone. I have tried it as posted, and also with swapping out the version that is located in my android-info.txt file: 3.26.502.56
Still no luck with setting the baseband version. IMEI still is cleared out.
Am I doing something wrong?

ayulatins said:
I had a similar problem and thought I solved it, but I later realised all my "solutions" didn't bring back the network but coincided with its reappearing cos no same "solution" worked more than once.
It's a very weird problem as the network shows up once in a while and when I'm using Mobile Network for Data, my phone hangs again and the IMEI, Network, baseband disappears on reboot...till further notice. I gave up trying and concluded it's either a bad modem (hardware) or something AT&T knows about!
Click to expand...
Click to collapse
Please see my initial quotes above...
All the previous steps I took were only a coincidence (not proven to work)!!!
We may need to contact AT&T to be sure its not a lock IMEI (and I'm wondering why it would be) or an experienced Dev

ayulatins said:
Please see my initial quotes above...
All the previous steps I took were only a coincidence (not proven to work)!!!
We may need to contact AT&T to be sure its not a lock IMEI (and I'm wondering why it would be) or an experienced Dev
Click to expand...
Click to collapse
Hey thanks for all of your suggestions. I contacted AT&T the day everything happened to see if it was on the block list. They said no. I tried multiple things including trying to re-flash the radio, but I was getting a signature failed error that I could not get around. I really think that's what the problem is. I gave up and ended up selling it.

centro7710 said:
Hey thanks for all of your suggestions. I contacted AT&T the day everything happened to see if it was on the block list. They said no. I tried multiple things including trying to re-flash the radio, but I was getting a signature failed error that I could not get around. I really think that's what the problem is. I gave up and ended up selling it, as is, on ebay instead to get a few bucks out of it and getting a new phone.
Click to expand...
Click to collapse
I really wouldn't mind selling mine too if I get a buyer. I'm just tired of all the troubles and no dev is willing to help.

ayulatins said:
I really wouldn't mind selling mine too if I get a buyer. I'm just tired of all the troubles and no dev is willing to help.
Click to expand...
Click to collapse
Exactly. It was my sister's phone. The sh*tty thing is we bought two off of ebay at the same time, 1 for me, 1 for her. Well, her phone was not in the box (either never shipped or stolen) so I had to file a claim through eBay which took 3 weeks to get the money back. Meanwhile, I gave her my phone (which is the phone in reference) to use instead. I bought her an iPhone instead now, along with purchasing one myself. I loved Android, but the bugs and fragmentation is getting too much for me to handle.

Dude, if you don't have an IMEI showing up, something is WAY wrong. That goes beyone the RIL not working... The RIL is probably fine. If your phone doesn't have an IMEI somehow, the cell towers are NOT, NO WAY, NEVER EVER going to register your phone on their network. You can put a billion SIM cards in there, or flash a billion stock ROMS, and if you don't have an IMEI, you will never be able to connect.
Something is probably corrupt or broken in your firmware or the hardware itself. I think your device is probably screwed.
My advice, is follow the steps to put your phone back to stock (including changing the bootloader message back to **LOCKED** and S-ON), and get it back to the phone company. They will be able to tell something is boned on the phone right away since it isn't displaying an IMEI.
Sorry to be the bearer of bad news and for your many wasted hours... But on the plus side, you now know a LOT about flashing and how your phone works now
Good luck with everything man! Hope they get you up and running soon!

I have the same problem as the OP but I have a IMEI showing up and a Basehand But won't connect to AT&T or anything they resent me a Signal & everything it shows a X with no bars it happened after I did a Factory Reset

anyone got the Radio.img?

inick73376 said:
I have the same problem as the OP but I have a IMEI showing up and a Basehand But won't connect to AT&T or anything they resent me a Signal & everything it shows a X with no bars it happened after I did a Factory Reset
Click to expand...
Click to collapse
That's weird..you try creating the apns again? I don't see how a factory reset would do that. Try toggling airplane mode too
Sent from my De-Sensed HTC Vivid using xda premium

I am currently having the same issues right now, it works if i leave the phone off for 1 hr it will work until i reboot then its down again, tried every thing possible, airplane mode will crash, reflashing the radios from gb and ics does nothing, setprop does nothing really. from this point it feels like a hardware issue.
sorry to revive an old thread, i just wanted to know if anyone came across this issue and had it fixed
i will get a log to see if there is errors showing up

Return it.
Sent from my HTC Holiday using Tapatalk 2

Related

i think i broke my phone :( help needed

hi all
i thought i would attempt to flash my samsung s with the new beta froyo update.
i followed this guys tutorial.
( cant link to it sorry its the noobs guide with detailed instructions through kies and odin)
i used the odin approach
i managed to root the phone.
on reboot it asked for an unlock code (o2 uk) so i went on to try and follow the steps about unlocking it. which neither worked all the way through the steps.
on reboot it appears to have signal and in the about section it says i am onnected to the o2 network but when i try to make a call is says "data network not available with an ok button, which when pressed will return you to the ome screen.
any help would be greatly appreciated thanks
Almost the same problem,
installed 2.2 update successfully, the phone worked for like 3-4 days very well and after that today i discovered "Emergency calls only"
so the question now is did i bought phone which later was reported stolen? or somehow i broke it?
Anyone have any idea?
hmmm, I have the same problem! In the status menu, the number is shown, but the network, says "unknown"
Hi! I have this exact same problem except I was unlocking my phone using this tutorial:
http://forum.xda-developers.com/showthread.php?t=906255
But I didn't back up my Efs folder, now my phone is unlocked but when I put a sim card in it I have very little network and when I try to make a call I get " NO DATA NETWORK AVAILABLE".
I've tried everything but I don't know what to do!
I was thinking of two ways to fix it:
1. Reinstall froyo (not quite sure how using the samsung software as my laptop oesn't recognised the phone as a pone)
2. Downgrade to, get unlock code using market app and then upgrade to froyo again.
I know I messed up but now I really need to fix this.
Can someone PLEASE PLEASE help me out.
mistress_gi said:
Hi! I have this exact same problem except I was unlocking my phone using this tutorial:
http://forum.xda-developers.com/showthread.php?t=906255
But I didn't back up my Efs folder, now my phone is unlocked but when I put a sim card in it I have very little network and when I try to make a call I get " NO DATA NETWORK AVAILABLE".
I've tried everything but I don't know what to do!
I was thinking of two ways to fix it:
1. Reinstall froyo (not quite sure how using the samsung software as my laptop oesn't recognised the phone as a pone)
2. Downgrade to, get unlock code using market app and then upgrade to froyo again.
I know I messed up but now I really need to fix this.
Can someone PLEASE PLEASE help me out.
Click to expand...
Click to collapse
might need to change the modem in odin i think. just heard about it
did u try restarting the phone... just a wild guess...
I had the same issue before and was puzzled. Its actually a very simple solution:
1. Re-lock your phone, search through xda there is a code you have to enter
2. Unlock your phone
All done! Surprisingly easy
Try the Odin method in block 2 back to Eclair if ok then upgrade to Froyo .
http://forum.xda-developers.com/showthread.php?t=818556
However your non connection might be due to not flashing a firmware with your network settings in which case manual settings of APN .
If your IMEI has changed due to flashing and you did not back up your EFS folder then little hope but do a google / search of XDA as some have reported success .
jje
Emergency calls only
I had a custom rom that was giving that to me too. I think it means that you can access a network different from your sim (because usually emerg calls can be made from any phone I think?).
I'd try and find a rom that is optimized for your carrier or at least a modem file from a stock rom that is for your carrier. You may also need to reselect the APN settings (or enter them for your carrier). Its under settings/wireless and network/Mobile networks/access point names (use the menu button to add an APN).
you could also try re downloading and flashing the rom to make sure that is the issue. Mine said it installed OK but never booted up, redownloaded and reflashed and then it was fine but the install screens looked identical.
G
Hi! Thank you so much for everyone's replies!
My IMEI isn't changed and someone helped me check my efs files and they are all ok. I'm going to try and reflash froyo through the samsung software to see if the network lock comes back and then try to unlock again. For this I'm going to unroot the phone and follow samsungs' instructions.
I'm afraid to relock the phone as there are reports that say it completely messes everything up!
But I'll keep you guys posted! Wish me luck!!!!
PS. Any other suggestions are more than welcome!
So, a quick update on my situation.
I uninstalled busybox and unrooted my phone using the oneclick root tool.
Did a factory format and, surprise surprise, my phone now works perfectly!
Apart from the fact that it doesn't connect to kies, but that's a whole another issue!
Tank you so much to all of you who answered my cry for help!
Gi

[Q] Unlock and Radio Issue, Please Help

I am deployed to Afghanistan right now. I ordered a brand new XT862, rooted it, and installed safestrap 2.10 and cm-9-20120815-UNOFFICIAL-solana.zip. That worked beautifully.
Unfortunately I am having problems getting the radio to work. I would set an APN but then sometimes it would just not appear in the list. I would set it again and again, then sometimes all of the APNs would appear in my list until the radio failed. After flashing, formatting, and reflashing several times and having the default Verizion access points finally pop up out of nowhere in my APN list, I realized I never "unlocked" the phone. I am using a Roshan SIM.
The weird part is the radio would work for a period of time. First for several hours, then it would start failing more and more frequently.
I found the XT862-5.7.906-SAFE and flashed it, hoping it would ask me for an unlock code upon booting, but no dice. It just went into "Global" mode. I am testing right now to see if the radio stays stable.
So, I am wondering if these instructions:
Guide - Unlock XT862 for T-mobile/ATT
http://forum.xda-developers.com/showthread.php?t=1406812
will get me to the unlock code screen, and once unlocked, will my radio problem disappear when I reflash CM9? My Internet connection is painfully slow here in Afghanistan so I only want to download what I know will work.
I do have a second XT862 that I had unlocked, then rooted and flashed CM9 to and it is working very well on Roshan out here.
Thanks for your help!
While running the XT862-5.7.906-SAFE, the radio cut out and I got a BP paniced message. I couldn't remember all of it before it crashed completely, but it asked to connect the USB for debugging. While the screen was flickering, a window popped up asking if I wanted to switch to GSM.
The radio doesn't seem to be stable even with this firmware.
Any suggestions or help would be greatly appreciated.
The radio cut out again, so I tried switching it from global to CDMA and then to GSM to see if I could get it to reset.
It told me there were no GSM networks available, and then asked to switch to Global.
I hit ok, then it told me that the SIM was invalid...
I'm a noob to this phone stuff, but this just seems crazy.
It seems it's definately the phone, because I swapped the SIMs in my two phones and the problems persist with the new one. My functioning phone continues to work fine on the chip designated for the problem phone.
Did you flash the 883 radio?
MrObvious said:
Did you flash the 883 radio?
Click to expand...
Click to collapse
No, I haven't yet because I didn't know if that was going to solve my problem or not. Downloading is a challenge for me right now, too.
I don't know if not unlocking the phone before flashing CM9 caused the problem or if it's something else entirely that I am missing. I will want to have the phone usable in the states again. Will flashing the 883 radio give me any difficulties there?
I've went back though the steps that I did on my other, working phone and [edit] not unlocking is [/edit] pretty much the only difference.
I'm probably going to try to download the 883 radio stuff tonight when I get home from work and give it a try.
ThunderZuk said:
No, I haven't yet because I didn't know if that was going to solve my problem or not. Downloading is a challenge for me right now, too.
I don't know if not unlocking the phone before flashing CM9 caused the problem or if it's something else entirely that I am missing. I will want to have the phone usable in the states again. Will flashing the 883 radio give me any difficulties there?
I've went back though the steps that I did on my other, working phone and [edit] not unlocking is [/edit] pretty much the only difference.
I'm probably going to try to download the 883 radio stuff tonight when I get home from work and give it a try.
Click to expand...
Click to collapse
Unlocking the phone MUST be done on stock firmware. The XT883 radio is only required for using US GSM networks, such as AT&T and T-Mobile. The stock XT862 radio (after unlock) supports foreign SIM cards (and of course Verizon's Vodafone SIM).
As I recall, CM9/10 normally has issues with the GSM radio, if you need your phone, I suggest flashing a ROM based on a stock GB system, such as Maverick (4.0 version, 4.5 has a battery drain issue with an overclock script) which is based on 906. I tend to keep the phone on GSM/UMTS mode, as "Global" also turns on the CDMA radio, which utilizes more battery. The APN only matters for Data/MMS without the proper APN, you should still get talk/text/signal (no EDGE or 3G icons, which indicate data connection).
Skreelink said:
Unlocking the phone MUST be done on stock firmware. The XT883 radio is only required for using US GSM networks, such as AT&T and T-Mobile. The stock XT862 radio (after unlock) supports foreign SIM cards (and of course Verizon's Vodafone SIM).
As I recall, CM9/10 normally has issues with the GSM radio, if you need your phone, I suggest flashing a ROM based on a stock GB system, such as Maverick (4.0 version, 4.5 has a battery drain issue with an overclock script) which is based on 906. I tend to keep the phone on GSM/UMTS mode, as "Global" also turns on the CDMA radio, which utilizes more battery. The APN only matters for Data/MMS without the proper APN, you should still get talk/text/signal (no EDGE or 3G icons, which indicate data connection).
Click to expand...
Click to collapse
I didn't update the radio on my working phone to 883. It has been doing just fine on Roshan Afghanistan and AIS in Thailand. In the states I use Verizon, so I don't think GSM is a biggie.
So, I have to get back to stock and unlock, then go through the hack process again. I figured I probably did. So before I try to download this file, do you think the 1-click SBF here:
[xt862] .906 1-click-sbf.exe + tools [10-8-2012]
http://forum.xda-developers.com/showthread.php?t=1686911
will do the job? If not, do you know what will? I'm still running XT862-5.7.906-SAFE. I do have Blur_Version.5.6.890.XT862.Verizon.en.US.zip but I don't know how to install it. I'm still learning all of this stuff. Would RSDLite do it?
I wasn't very specific when I talked about the radio, sorry. More or less the voice connection would stop along with the data. It was just weird that sometimes the APNs would show up in the list and sometimes they wouldn't. When they did, it showed multiple from when I tried entering them several times. I don't know why it would write the changes but not read the list.
When about five Verizon APNs showed up and none of my Afghan APNs showed up, I realized I must have needed to unlock the phone. When I hacked it I just assumed it wouldn't have to be unlocked. I figured I WAS unlocking it. LOL!
Thanks everyone for your help.
ThunderZuk said:
I didn't update the radio on my working phone to 883. It has been doing just fine on Roshan Afghanistan and AIS in Thailand. In the states I use Verizon, so I don't think GSM is a biggie.
So, I have to get back to stock and unlock, then go through the hack process again. I figured I probably did. So before I try to download this file, do you think the 1-click SBF here:
[xt862] .906 1-click-sbf.exe + tools [10-8-2012]
http://forum.xda-developers.com/showthread.php?t=1686911
will do the job? If not, do you know what will? I'm still running XT862-5.7.906-SAFE. I do have Blur_Version.5.6.890.XT862.Verizon.en.US.zip but I don't know how to install it. I'm still learning all of this stuff. Would RSDLite do it?
I wasn't very specific when I talked about the radio, sorry. More or less the voice connection would stop along with the data. It was just weird that sometimes the APNs would show up in the list and sometimes they wouldn't. When they did, it showed multiple from when I tried entering them several times. I don't know why it would write the changes but not read the list.
When about five Verizon APNs showed up and none of my Afghan APNs showed up, I realized I must have needed to unlock the phone. When I hacked it I just assumed it wouldn't have to be unlocked. I figured I WAS unlocking it. LOL!
Thanks everyone for your help.
Click to expand...
Click to collapse
If you were on the 906 OTA, the one click EXE would work, no programs required. Connect phone in bootloader > run the exe > The phone will flash. In Global mode, when you check the APNs, only the Verizon ones will show, you MUST be in GSM/UMTS mode for your own APNs to show up. Also, if it's occasionally in and out, I wonder if the connection between the SIM and phone are bad, like a shake or movement will break the contact. (Which when a SIM is not present, only the Verizon APNs will show as well and would prompt for global mode)
Try taking the SIM out, cleaning the contacts, and placing it back in. If the sim seems loose, try slipping a single thin piece of paper behind it to make sure it's getting full contact. Otherwise, it might be a hardware fault.
Skreelink said:
If you were on the 906 OTA, the one click EXE would work, no programs required. Connect phone in bootloader > run the exe > The phone will flash. In Global mode, when you check the APNs, only the Verizon ones will show, you MUST be in GSM/UMTS mode for your own APNs to show up. Also, if it's occasionally in and out, I wonder if the connection between the SIM and phone are bad, like a shake or movement will break the contact. (Which when a SIM is not present, only the Verizon APNs will show as well and would prompt for global mode)
Try taking the SIM out, cleaning the contacts, and placing it back in. If the sim seems loose, try slipping a single thin piece of paper behind it to make sure it's getting full contact. Otherwise, it might be a hardware fault.
Click to expand...
Click to collapse
I'm currently running the SAFE version found here:
XT862 5.7.906 Update FXZ DST
http://forum.xda-developers.com/showthread.php?t=1554916
It doesn't say that it's an OTA. I'm still running safestrap 2.10 with it. That's why I was curious if that might work. I also have that full BLUR download already. I tried installing it using safestrap, but that didn't work. I'm assuming because it's not supposed to. If I can get that installed and it works I'd be happy. I have to remote into my server at home, download there, and then FTP over here at like 6k/sec. Am I correct in assuming I'd install that full BLUR image with RSDLite?
I haven't had any issues with the SIM from the bad phone in my good phone, and everything feels tight when I put the SIM in. I've tried cleaning the contacts a bit. I haven't tried putting something in there to hold it tighter yet, though.
ThunderZuk said:
I'm currently running the SAFE version found here:
XT862 5.7.906 Update FXZ DST
http://forum.xda-developers.com/showthread.php?t=1554916
It doesn't say that it's an OTA. I'm still running safestrap 2.10 with it. That's why I was curious if that might work. I also have that full BLUR download already. I tried installing it using safestrap, but that didn't work. I'm assuming because it's not supposed to. If I can get that installed and it works I'd be happy. I have to remote into my server at home, download there, and then FTP over here at like 6k/sec. Am I correct in assuming I'd install that full BLUR image with RSDLite?
I haven't had any issues with the SIM from the bad phone in my good phone, and everything feels tight when I put the SIM in. I've tried cleaning the contacts a bit. I haven't tried putting something in there to hold it tighter yet, though.
Click to expand...
Click to collapse
The Droid 3 does not require RSDLite, as it has fastboot. Which is able to flash certain parts alone instead of the whole system (or the whole thing together) it's easier than RSDLite and can make modifications without losing everything. That's how the XT883 radio is flashed without modifying the system.
The one click method would fully flash it as if you used an SBF in RSDLite. If you have safestrap enabled on safe; make a full backup with recovery, then disable safe-mode. You'll then reboot into your stock system, unlock there, then enable the safe boot again, restore your backup.
SIM unlocking is for good, no amount of flashing, updating, etc will revert it. If the phone DOES get service with the sim, then it's already unlocked.. if it's occasionally cutting out, that's a different issue.
ThunderZuk said:
I'm currently running the SAFE version found here:
XT862 5.7.906 Update FXZ DST
http://forum.xda-developers.com/showthread.php?t=1554916
It doesn't say that it's an OTA. I'm still running safestrap 2.10 with it. That's why I was curious if that might work. I also have that full BLUR download already. I tried installing it using safestrap, but that didn't work. I'm assuming because it's not supposed to. If I can get that installed and it works I'd be happy. I have to remote into my server at home, download there, and then FTP over here at like 6k/sec. Am I correct in assuming I'd install that full BLUR image with RSDLite?
I haven't had any issues with the SIM from the bad phone in my good phone, and everything feels tight when I put the SIM in. I've tried cleaning the contacts a bit. I haven't tried putting something in there to hold it tighter yet, though.
Click to expand...
Click to collapse
Holy shinto! I didn't know it saved that! I figured it was gone!
So I disabled safestrap, then it kept telling me com.android.phone had stopped. I'd force close and it would say it again. I went back into safestrap, did a factory wipe, rebooted and now it is connected in "Global" mode again on the stock 5.6.890.XT862.Verizon.en.US. It was looking good for a while, until the phone just rebooted itself.
I put my other SIM in the phone, booted back up and it worked for a while until the signal dropped and the phone gave me an invalid SIM error again. So, it's given me an invalid SIM on two different SIMs now in stock and flashed ROMs.
The SIM is in there tight. I couldn't get a piece of paper in there. I cleaned the contacts again, but they don't look dirty at all.
I put the original SIM back in there, it booted up, never got signal, and rebooted itself again. It doesn't have signal now, and I assume it's just about to reboot itself again.
You think I got a bum phone? I didn't test it at all before I started hacking it.
Also, if I do the *#*#4636#*#* while it has no signal it tells me my IMEI number is unknown, if that helps. If press the turn off radio button, it does nothing.
[edit]It also tells me pretty much everything (MEID, IMEI SV, SIM ID, ect...) is unknown if I go into About Phone>Status[/edit]
ThunderZuk said:
Also, if I do the *#*#4636#*#* while it has no signal it tells me my IMEI number is unknown, if that helps. If press the turn off radio button, it does nothing.
[edit]It also tells me pretty much everything (MEID, IMEI SV, SIM ID, ect...) is unknown if I go into About Phone>Status[/edit]
Click to expand...
Click to collapse
That happens if either; Airplane mode is on, or you have an incorrect build.prop, have you modified it in any way? Also have you tried making a backup and turning safe boot off?
Also; If the zips are still on your SDCard, try reflashing your rom to make sure you have the correct build.prop.
Skreelink said:
That happens if either; Airplane mode is on, or you have an incorrect build.prop, have you modified it in any way? Also have you tried making a backup and turning safe boot off?
Also; If the zips are still on your SDCard, try reflashing your rom to make sure you have the correct build.prop.
Click to expand...
Click to collapse
I have safestrap turned off and it appears I am running on stock? It says I am running 5.7.890 and not 5.7.906. There is a Superuser icon in the all apps, but I think that is from where I rooted it.
I rebooted and all the numbers came back... for now.
I don't have airplane mode on. I tried to turn it on after reading your post. It caused the phone to reboot. Once rebooted, it came back up in airplane mode. I turned it off and it is connected again, for now.
I haven't messed with the build.prop that I know of. I only rooted, installed CM9 several times, formatted everything several times in-between those installs, and most recently flashed that XT862-5.7.906-SAFE.zip.
And before I even finished this post it rebooted itself on me again...
ThunderZuk said:
I have safestrap turned off and it appears I am running on stock? It says I am running 5.7.890 and not 5.7.906. There is a Superuser icon in the all apps, but I think that is from where I rooted it.
I rebooted and all the numbers came back... for now.
I don't have airplane mode on. I tried to turn it on after reading your post. It caused the phone to reboot. Once rebooted, it came back up in airplane mode. I turned it off and it is connected again, for now.
I haven't messed with the build.prop that I know of. I only rooted, installed CM9 several times, formatted everything several times in-between those installs, and most recently flashed that XT862-5.7.906-SAFE.zip.
And before I even finished this post it rebooted itself on me again...
Click to expand...
Click to collapse
Alright, did you put the sim in and get the unlock screen to put in the unlock code? 890 is alright to be on, that's what my stock system is. I would suggest staying away from CM9/CM10 as they are unstable when using GSM networks. Either stay stock or flash a ROM based on Blur (I suggest MavRom 4.0).
Skreelink said:
Alright, did you put the sim in and get the unlock screen to put in the unlock code? 890 is alright to be on, that's what my stock system is. I would suggest staying away from CM9/CM10 as they are unstable when using GSM networks. Either stay stock or flash a ROM based on Blur (I suggest MavRom 4.0).
Click to expand...
Click to collapse
It never asked me for an unlock. It just immediately put the phone in world mode.
I literally did this with the phone.
1. open factory sealed box
2. root the phone
3. install safestrap
4. format all partitions
5. install CM9
6. install SIM
7. repeat 4 and 5 serveral times
8. install 5.7.906 hoping to get an unlock screen in order to possibly fix radio issue
9. start this thread.
Now, I did steps 4 and 5 over and over again over about 2 weeks off and on while I tried to figure out what was going wrong. Like I said, I am running CM9 very successfully here since August on a different XT862 that I did unlock before rooting. I installed a KANG build, not a KEXEC.
The amount of times your device seems to be rebooting makes me think there is something wrong with it.
Sent from my XT860 using xda premium
ThunderZuk said:
It never asked me for an unlock. It just immediately put the phone in world mode.
I literally did this with the phone.
1. open factory sealed box
2. root the phone
3. install safestrap
4. format all partitions
5. install CM9
6. install SIM
7. repeat 4 and 5 serveral times
8. install 5.7.906 hoping to get an unlock screen in order to possibly fix radio issue
9. start this thread.
Now, I did steps 4 and 5 over and over again over about 2 weeks off and on while I tried to figure out what was going wrong. Like I said, I am running CM9 very successfully here since August on a different XT862 that I did unlock before rooting. I installed a KANG build, not a KEXEC.
Click to expand...
Click to collapse
Hm... while in unsafe (stock) the unlock screen should have come up. It will not on other roms, as for global mode, that is a default setting, without unlock, will only work with the verizon vodafone sim that came with the phone. Reboots can be either hardware, rom, or app problem. You can try a factory wipe and see if that helps the reboots. Trying to find solutions without you having to download more.
Endoroid said:
The amount of times your device seems to be rebooting makes me think there is something wrong with it.
Sent from my XT860 using xda premium
Click to expand...
Click to collapse
I was kind of worried that was the case. I just ordered a refurb unit just in case.

No Sim Detected LG Optimus 2x :(

Hi
My phone suddenly stopped detecting all sim cards ( I have tried various working sims ).
It is running CM 7.2 and has been running cm 7.2 for a few months with no problems.
Today I took out the sim and put it back in to reboot, all was fine. I went to shower, came back and the sim suddenly stopped being detected.
I have tried to google but it seems most problems are to do with flashing a new rom and having the sim not work, my case is that the rom has been the same for a few months.
I have tried to flash different roms and I still have the same problem. I have a gut feeling it is the hardware that reads the sim that is faulty.
I have read something about a baseband, I dont know what that is but if it helps, when i go to the settings and click on 'about phone'
It says there is a baseband and it is version something. There are no question marks or anything like that.
I appreciate the help and would love some more troubleshooting suggestions.
The worst case scenario is unrooting it, flashing stock rom and send it back to warranty. I actually don't know how to do that so if anyone has a guide lying around please link me on that.
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
asmerito said:
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
cimore000 said:
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
Click to expand...
Click to collapse
First you flash BB, then download RIL with GetRil. Read completely through BB sticky topic in development section. All answers are there.
http://forum.xda-developers.com/showthread.php?t=1658047
[Baseband][P990] Complete Baseband overview thread
Sent from my LG-P990 using xda app-developers app
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I checked the IMEI and it matches.
I have some extra information if it helps, when I choose a random RIL from getril, the battery might become a ? mark and the sim card not detected error doesnt show anymore, however when I put it back to the original RIL, my battery bar starts showing the 'power left' and also the sim not detecting error shows again.
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I get the SIM Toolkit Incompatible Handset error and then whether I press OK or Cancel, shortly after I lose mobile network access. I've been trying all manner of different things, Smart Flashing, NVflashing, changing basebands, Rils, you name it.
I'm currently on the V30B root ROM http://forum.xda-developers.com/showthread.php?t=2064793 and the Ril matches the baseband from that ROM, but that hasn't helped either. So I went and check the in phone and behind battery IMEI and they are different! I'd love to hear what your solution to this is!
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
My problem was no service and IMEI unknown... Never managed to solve it. Reverted to old bootloader and problem solved.
Sent from my LG-P990 using xda app-developers app
IMEI Solution
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
4) Install a program called Hyperterminal on your PC and open it. In COM settings select same port as in device manager -> LGE Mobile USB Seial Port (should be 115200)
5) Type at%imei and it should respond by saying OK
6) Now type at%imei and it should now display your current IMEI number.
7) Type at%imei=XXXXXXXXXXXXXXX where X is your original IMEI number.
8) Reset phone.
You might have to reboot your phone after step 3. But see if it works without.
I have been thinking that this is a hardware issue, I have not changed a single setting/rom/baseband at all, the sim just wasnt detecting when I came back to my phone. The rom and settings were the same for a number of months.
I am now going to give it in to warranty, however it only has 1 month left. I have tried to install the stock firmware but with no luck..
I found a rom to flash for my region, it is a zip file but when I try flash it with Clockworkmod, it says installation aborted....
Shouldnt I be able to flash the roms with CWM? The file is a zip file just like the CM7.2 rom I flashed. Do I need nvflash instead? I found the rom here :
http://forum.xda-developers.com/showthread.php?t=1852112 (the download links were removed so I googled the exact same rom)
I was also told that if I just use the LG update tool, it sohuld automatically update the phone to stock firmware AND unroot it, only that the update tool gives me an error. Whats the best approach guys?? I need to get this fixed before my warranty goes.
Custom40 said:
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu...
Click to expand...
Click to collapse
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
[-Stash-] said:
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
Click to expand...
Click to collapse
Trust me, you can try whatever you want. This is the only way to get it working. I spent hours and hours to figure this out, so I guarantee you it will work.
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
interr said:
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
Click to expand...
Click to collapse
Your imei should not show in settings, it should show in the back of your battery and when you dial : *#06# into the phone (where you dial numbers for calls).
Cant help you with baseband.
OP here, I am trying to unroot my phone and put stock firmware to get warranty to fix the simcard reader ( i believe it is a hardware issue ).
If I use nvflash and flash any stock firmware I can find on the internet, will that be OK? I have a feeling each region of optimus 2x has slight differences in firmware, eg swedish stock roms and australian stock roms may differ in the default applications etc.
Will it be ok to just install any kind of stock rom for my warranty? Help would be appreciated my warranty is running out in less than a month now.
I also tried to flash stock firmware with CMW, it didnt work. I am about to try NVflash, so I went into greater detail in page 1 but no one replied yet. If you guys know please help. I am more familiar with CMW than NVflash. I have not used NVflash yet.
hahah after 2 sleeples nights i menage to restore my sim to be recognize ,whit this metod,.. NFlash rulles ))
http://www.ibtimes.co.uk/articles/408044/20121124/unbrick-tool-lg-optimus-p990.htm
http://androidadvices.com/unbrick-lg-optimus-2x-p990-android-phone-tutorial/
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
this is also the best metod for unbricking your phone, .
INSTALLATION:
ATTENTION
The flasher with NVFlash clears all memory, including the Internal SD., so make a backup if u can..
Download this file: http://bayfiles.com/file/yKZL/eGZ31A/driver.rar The pack includes the APX driver (folder driver)
http://www.putlocker.com/file/4CEDEB7E0893B6F1
1.- Remove the battery to the phone.
2.- Press and hold Vol- and Vol+ and without releasing the 2 keys connect the USB cable to the PC
3.- Go to the progmaq-default-cm-10-20121105 folder and run flash icon... folow instruction., wait wait wait Enjoy!
Custom40 said:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
Click to expand...
Click to collapse
I managed to get an old CM7 install back on the p990,but the above is still not working for me :/
After I finish typing in 1809#*990# in dialer, nothing happens. If I press the green phone handset icon to dial that number it comes up with an error message of "Mobile network not available".
Any further advice? Thanks.
Okay, I failed at reading comprehension – it has to be an LG Gingerbread ROM for this code to work, NOT a CM-based one!
Trying one from somewhere-I-cannot-link-to-yet
Success! Once I was back on the original stock LG Gingerbread ROM, I could reset the IMEI and make/receive calls again using this method. Thank you very much!
Now all flashed back onto a nice "working" nightly CM10.1 and a very happy little device.
Many thanks all.
Hi,
Anyone have a working link to "progmaq-default-cm-10-20121105 ". My Optimus 2x has been bricked as well, and can't find any other version of this on Google unfortunately
Appreciate all help.

[Q] Unrooting HTC One running 3.04.651.2 with hboot 1.55

Hi All ,
My apologies if there is a solution to my problem in another thread. I have spent countless hours looking for a way to unroot my Sprint HTC One because the Sprint network can't seem to activate it until I do. Or I need to figure out a way to force the Sprint network to accept my MDN and MSID which can "sometimes" be problematic with rooted devices. It might be easier to just unroot and see if that helps getting the phone to properly activate.
Other than the network connectivity issues, the phone is fully functional. Just cant make calls or send texts.
I am running this ROM based on benny's system dump: http://forum.xda-developers.com/showthread.php?t=2467607 so my device information is:
Android version - 4.3
Sense version - 5.0
Software version - benny's 4.3
Kernel version - [email protected] #1 SMP PREEMPT
Baseband version - 1.00.20.0913_3
Build number - 3.04.651.2 CL251863 release-keys
I've tried everything I can think of to get my device unrooted, but none of the RUUs work due to being on hboot 1.55 s-on or having an older firmware version (1.29.xx or 1.39.xx.)
Is there any method I can use to get completely back to un-rooted stock rom with, relocked boot loader (know how to do that part), stock recovery, etc?
I've looked at so many different threads and google searches and all say you need to be s-off and run RUUs of versions that will either cause my touch screen to not work or worse. If anyone can help me it would be amazing and I would be much obliged.
I am having similar issues. I'm about to try this method - http://forum.xda-developers.com/showthread.php?t=2470569&page=3 Read OP and see post#27
jharre08 said:
I am having similar issues. I'm about to try this method - http://forum.xda-developers.com/showthread.php?t=2470569&page=3 Read OP and see post#27
Click to expand...
Click to collapse
Ah yes! The 3.04 version wasn't available the last time I read that post! I can confirm that the other that using the 1.29 and 1.31 versions caused serious issues for me and my phone. This post is actually what led me to learn about the issues due to different firmware and file structure between new and older versions.
I'm downloading now. Let me know how it goes!
tuckprodigy said:
Ah yes! The 3.04 version wasn't available the last time I read that post! I can confirm that the other that using the 1.29 and 1.31 versions caused serious issues for me and my phone. This post is actually what led me to learn about the issues due to different firmware and file structure between new and older versions.
I'm downloading now. Let me know how it goes!
Click to expand...
Click to collapse
Also, check this out - http://qbking77.com/development/how-to-unrootunbrick-the-htc-one-to-stock-2/
It's a bit dated, but I am going to try this method if I can find a 3.04 RUU. Note, he is doing this to an S-On phone, which is what we have. So it SHOULD work:good:
Nothing against the first method I posted, but I'd much rather do a RUU and get a clean slate...
There is no RUU for 3.04 yet ( that I know of)...
this is your best (and pretty much only) option: http://forum.xda-developers.com/showpost.php?p=46565593&postcount=27
Did you ever find a way to resolve this issue? Also did this start after flashing Cyanogenmod? I have the exact same issue and it seems I have exhausted all available resources. Currently have the following setup:
Android version - 4.3
Sense version - 5.0
Software version - 3.04.651.2
Kernel version - [email protected] #1 SMP PREEMPT
Baseband version - 1.00.20.0913_3
Build number - 3.04.651.2 CL251863 release-keys
Noticed that the phone is unable to update PRL correctly. Version will switch from 00000 to 1 to 55016. I am also unable to commit changes to any EPST settings (which is the first thing sprint tried to do). MDN and MSID both currently say 'no' and I can't update.
I'm having the exact same issue with everything working fine but no calls/texts.
I flashed the Guru reset for 3.04 but still no calls/text.
Any other solutions?
kindabizzie said:
I'm having the exact same issue with everything working fine but no calls/texts.
I flashed the Guru reset for 3.04 but still no calls/text.
Any other solutions?
Click to expand...
Click to collapse
Try the following:
Full wipe. Flash the newest stable CM.
Go into Settings > More... (under Wireless & Networks) > Mobile networks > CDMA subscription:
Confirm the following settings:
Network mode = LTE/CDMA/EvDo
CDMA subscription = NV
After you confirm these settings, switch the network mode to CDMA/EvDo only and then back to LTE/CDMA/EvDO.and give it a minute or so, you should see 3G/Phone availability come back. You can test this by dialing a number. You should be able to make a call, or at least get the default Sprint "device is not activated" recording. After confirming this, you can do another wipe and flash back to a stock ROM. You should now have mobile network connectivity back. You may need to Activate the phone again and update the profile/PRL to get back to 100%.
jjmckaskie said:
Try the following:
Full wipe. Flash the newest stable CM.
Go into Settings > More... (under Wireless & Networks) > Mobile networks > CDMA subscription:
Confirm the following settings:
Network mode = LTE/CDMA/EvDo
CDMA subscription = NV
After you confirm these settings, switch the network mode to CDMA/EvDo only and then back to LTE/CDMA/EvDO.and give it a minute or so, you should see 3G/Phone availability come back. You can test this by dialing a number. You should be able to make a call, or at least get the default Sprint "device is not activated" recording. After confirming this, you can do another wipe and flash back to a stock ROM. You should now have mobile network connectivity back. You may need to Activate the phone again and update the profile/PRL to get back to 100%.
Click to expand...
Click to collapse
Didn't work man, thanks though. My data is fine, I just can't call/txt...it's really bizarre...
kindabizzie said:
Didn't work man, thanks though. My data is fine, I just can't call/txt...it's really bizarre...
Click to expand...
Click to collapse
Hmm. That's pretty much the issue that I had except 4G/Wifi was working and 3G/Call/Text didnt seem to be. You might try switching the CDMA mode to SIM and then back to NV to make sure the setting takes. I know CM can be really finicky with network changes.
tuckprodigy said:
Hi All ,
My apologies if there is a solution to my problem in another thread. I have spent countless hours looking for a way to unroot my Sprint HTC One because the Sprint network can't seem to activate it until I do. Or I need to figure out a way to force the Sprint network to accept my MDN and MSID which can "sometimes" be problematic with rooted devices. It might be easier to just unroot and see if that helps getting the phone to properly activate.
Other than the network connectivity issues, the phone is fully functional. Just cant make calls or send texts.
I am running this ROM based on benny's system dump: http://forum.xda-developers.com/showthread.php?t=2467607 so my device information is:
Android version - 4.3
Sense version - 5.0
Software version - benny's 4.3
Kernel version - [email protected] #1 SMP PREEMPT
Baseband version - 1.00.20.0913_3
Build number - 3.04.651.2 CL251863 release-keys
I've tried everything I can think of to get my device unrooted, but none of the RUUs work due to being on hboot 1.55 s-on or having an older firmware version (1.29.xx or 1.39.xx.)
Is there any method I can use to get completely back to un-rooted stock rom with, relocked boot loader (know how to do that part), stock recovery, etc?
I've looked at so many different threads and google searches and all say you need to be s-off and run RUUs of versions that will either cause my touch screen to not work or worse. If anyone can help me it would be amazing and I would be much obliged.
Click to expand...
Click to collapse
You may need to flash a stock rom and manually enter you MDN and MSID using the epst menu
no luck
At this point I have not had any luck solving this issue. I used Guru's reset tool as well and believe the problem is the radio firmware. I spent a good deal of time on the phone with Sprint support and with a surprisingly competent technician in the store. He tried to work with multiple different systems they have available to get the phone to recognize the Sprint towers with no success.
He said that the phone just isn't recognizing them in any way and commented that a phone that isn't activated will still show bars of service because the phone gets the signals from nearby towers, but just doesn't know what to do with the signal until activated. In my case, all I see is the "X" above the signal bar graphic.
If you're experiencing the same issue as me, there is nothing Sprint can do to make the phone recognize their towers based on the conversations I've had. I saw my options as:
1. Wait for an RUU to come out or something like that
2. Try out different ROMs - jjmckaskie suggested the newest CM, but I would think others might be worth trying as well. Basically anything that uses different radio firmware
3. Get a new phone - This is the option I've gone with. Since my phone is running a stock ROM and the guy at Best Buy where my insurance is from, didn't check the bootloader (would have said "tampered" and "unlocked"), he assumed I never voided my warranty and sent out for a refurb. This may not work if your insurance is through Sprint though. I'm not sure how thorough they are.
tuckprodigy said:
At this point I have not had any luck solving this issue. I used Guru's reset tool as well and believe the problem is the radio firmware. I spent a good deal of time on the phone with Sprint support and with a surprisingly competent technician in the store. He tried to work with multiple different systems they have available to get the phone to recognize the Sprint towers with no success.
He said that the phone just isn't recognizing them in any way and commented that a phone that isn't activated will still show bars of service because the phone gets the signals from nearby towers, but just doesn't know what to do with the signal until activated. In my case, all I see is the "X" above the signal bar graphic.
If you're experiencing the same issue as me, there is nothing Sprint can do to make the phone recognize their towers based on the conversations I've had. I saw my options as:
1. Wait for an RUU to come out or something like that
2. Try out different ROMs - jjmckaskie suggested the newest CM, but I would think others might be worth trying as well. Basically anything that uses different radio firmware
3. Get a new phone - This is the option I've gone with. Since my phone is running a stock ROM and the guy at Best Buy where my insurance is from, didn't check the bootloader (would have said "tampered" and "unlocked"), he assumed I never voided my warranty and sent out for a refurb. This may not work if your insurance is through Sprint though. I'm not sure how thorough they are.
Click to expand...
Click to collapse
Dang, and I was gonna go to a Sprint store after work. *Sigh* guess I have NO CHOICE but to get a Nexus 5 now, lololol
kindabizzie said:
Dang, and I was gonna go to a Sprint store after work. *Sigh* guess I have NO CHOICE but to get a Nexus 5 now, lololol
Click to expand...
Click to collapse
As a last resort you could also try the hard reset code from your dialer by entering ##72786# . You will need to be on a stock rom. You will also need your MSL code (you can usually get this from Sprint support). This will reset EVERYTHING so be mindful. It will also force a hands free activation/Profile/PRL update after the phone reboots which is sometimes useful.
jjmckaskie said:
As a last resort you could also try the hard reset code from your dialer by entering ##72786# . You will need to be on a stock rom. You will also need your MSL code (you can usually get this from Sprint support). This will reset EVERYTHING so be mindful. It will also force a hands free activation/Profile/PRL update after the phone reboots which is sometimes useful.
Click to expand...
Click to collapse
I still took it to Sprint just to see and they fixed it. Downside is my GPS and LTE is messed up again (Me trying to fix those things is the reason all this happened in the first place) but I'd rather not have GPS than not have phone capabilities on my phone (And LTE in Los Angeles is garbage anyway). I think I'm gonna leave my phone alone for a while tho, lol.
jjmckaskie said:
As a last resort you could also try the hard reset code from your dialer by entering ##72786# . You will need to be on a stock rom. You will also need your MSL code (you can usually get this from Sprint support). This will reset EVERYTHING so be mindful. It will also force a hands free activation/Profile/PRL update after the phone reboots which is sometimes useful.
Click to expand...
Click to collapse
Looks like I am going to go this route. I hit ##72786# and it takes me to SCRTN screen. I'm guessing I just hit menu in the top right, then reset? Then it will prompt me for my MSL code?
jharre08 said:
Looks like I am going to go this route. I hit ##72786# and it takes me to SCRTN screen. I'm guessing I just hit menu in the top right, then reset? Then it will prompt me for my MSL code?
Click to expand...
Click to collapse
Yup. I actually dont remember if it does a full wipe, or just forces an activation/profile/PRL update. But either way it's worth a shot.
tuckprodigy said:
At this point I have not had any luck solving this issue. I used Guru's reset tool as well and believe the problem is the radio firmware. I spent a good deal of time on the phone with Sprint support and with a surprisingly competent technician in the store. He tried to work with multiple different systems they have available to get the phone to recognize the Sprint towers with no success.
He said that the phone just isn't recognizing them in any way and commented that a phone that isn't activated will still show bars of service because the phone gets the signals from nearby towers, but just doesn't know what to do with the signal until activated. In my case, all I see is the "X" above the signal bar graphic.
If you're experiencing the same issue as me, there is nothing Sprint can do to make the phone recognize their towers based on the conversations I've had. I saw my options as:
1. Wait for an RUU to come out or something like that
2. Try out different ROMs - jjmckaskie suggested the newest CM, but I would think others might be worth trying as well. Basically anything that uses different radio firmware
3. Get a new phone - This is the option I've gone with. Since my phone is running a stock ROM and the guy at Best Buy where my insurance is from, didn't check the bootloader (would have said "tampered" and "unlocked"), he assumed I never voided my warranty and sent out for a refurb. This may not work if your insurance is through Sprint though. I'm not sure how thorough they are.
Click to expand...
Click to collapse
Sounds like you solved your issue, but for anyone else having trouble....
I re-tried GURU's reset and it worked. The first time I downloaded it over the 4G network. I also downloaded the OTA over the 4G network. My radio has been giving me fits ever since. Finally, I downloaded GURU's reset over WIFI, then made sure the OTA downloaded over WIFI, and my phone is like new again! No radio issues, everything is perfect. Hope this helps some people...

Optimus L90 Unable to Root, Unable to boot into recovery mode

Hi
I have gone through the forums and can't seem to find solution for my problem with my Optimus L90 phone.
I have recently flashed the CM13 on my phone without any errors but below are the issues that I am facing
1. No cellular network signal after inserting SIM card.
2. I read in a different forum that this could happen due to using a wrong version of TWRP, so installed a newer version 2.8.7.0 but things worse.
3. Now I am not able to boot into recovery mode and phone just stays idle with the LG logo screen and few commands appearing like fastboot_iniy() and udc_start().
4. I have tried hard reset and soft reset and both are not successful.
5. I cannot root my phone either. Tried all ways like towelroot, purpledrake, lg root by avicoh etc but in vain
Now my phone, even though has a latest CM version I cannot use it for anything else.
Any help is greatly appreciated.
No SIM is hardly related to TWRP, probably you needed a different bootstack (there is a thread about it).
On CM you don't need anything to root, it's already rooted just not visible to common users, you need to activate Developer Options (it's also explained elsewhere)
Finally, if you cannot reach recovery but still can boot CM13 simply use adb, Flashfy or Hashr to flash another version or TWRP. 2.8.7 is kinda old and not recommended for Marshmallow, you can try 3.0.2 by SlimShady or DarkBlue version from shoxxy's thread.
Thanks for the reply, let me try options you have specified and get back if I am still facing issues
hvramanan said:
Thanks for the reply, let me try options you have specified and get back if I am still facing issues
Click to expand...
Click to collapse
I was able to unblock my phone finally and loaded the stock ROM but the phone is still isn't recognizing cellular network . I am on T-MOBILE. I have tried to insert different SIM, turned off wifi calling but still the phone is not catching any cellular network.
[lfom]: you indicated earlier that a different bootstack might be needed. I am not that knowledgeable about bootstack so can you help me through this or point me to different thread where users might have a similar issue.
Sorry, I meant to say unbrick above
Everything one needs or wants to know about bootstack is here:
http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632
lfom said:
Everything one needs or wants to know about bootstack is here:
http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632
Click to expand...
Click to collapse
Hi,
I followed the steps mention in the above thread to change the bootstack and was able to complete it without any issues, however the problem still persists and my phone is not recognizing the SIM and does not catch the cellular network.
Previously I used to use this phone with my t-mobile number and after I took a new phone haven't been using it for sometime. I want to sell this phone and was trying to ensure that it works fine and thats when I saw that the phone is not catching any cellular networks.
Please help. Let me know if you need any other details to better diagonize the problem.
hvramanan said:
Hi,
I followed the steps mention in the above thread to change the bootstack and was able to complete it without any issues, however the problem still persists and my phone is not recognizing the SIM and does not catch the cellular network.
Previously I used to use this phone with my t-mobile number and after I took a new phone haven't been using it for sometime. I want to sell this phone and was trying to ensure that it works fine and thats when I saw that the phone is not catching any cellular networks.
Please help. Let me know if you need any other details to better diagonize the problem.
Click to expand...
Click to collapse
You didn't say what model you have, maybe you flashed the wrong bootstack for your model (hardware version)? Be very careful, you can hart brick your device, and if it's a D415 it's very hard to unbrick. I'd suggest that first you make sure what model you have by removing the battery and looking in the label below, it says what model you have. Then, use LG Flash Tool to flash stock ROM (KDZ) to latest KitKat, then flash Lollipop or use OTA to update to latest version. The only requirements are that you make sure what model you have and flash the corresponding version, and the phone is still able to enter download mode.
lfom said:
You didn't say what model you have, maybe you flashed the wrong bootstack for your model (hardware version)? Be very careful, you can hart brick your device, and if it's a D415 it's very hard to unbrick. I'd suggest that first you make sure what model you have by removing the battery and looking in the label below, it says what model you have. Then, use LG Flash Tool to flash stock ROM (KDZ) to latest KitKat, then flash Lollipop or use OTA to update to latest version. The only requirements are that you make sure what model you have and flash the corresponding version, and the phone is still able to enter download mode.
Click to expand...
Click to collapse
[lfom]: thank you for responding. My phone model is LG-D415 . Actually my phone was bricked but I was able to get into download mode and then I used the L90 Hardbrick tool to flash stock ROM (KDZ) to latest kitkat like you have specified above. Then with the OTA update I was able update it to latest lollipop. Then I followed this forum below to to change the bootstack to KK 10C version as the issue specified in the below thread was similar to mine.
http://forum.xda-developers.com/lg-l90/development/rom-cyanogenmod-12-lg-l90-t3049512/page235
Image of the label inside my phone attached.
Do you think I should have used the LG flash tool to flash stock ROM. Should I repeat the steps with the LG flash tool ?
Thank you again for helping me on this.
Do you see your IMEI in the about phone page? Does it match the one in the label? Maybe when you bricked you've lost the phone's IMEI, and you can't get it back just flashing ROM...
lfom said:
Do you see your IMEI in the about phone page? Does it match the one in the label? Maybe when you bricked you've lost the phone's IMEI, and you can't get it back just flashing ROM...
Click to expand...
Click to collapse
Yes I checked and it matches. There two fields IMEI which has the number and then there is another field which says IMEI SV and it has a value of 02 in it.

Categories

Resources