Hi
I have gone through the forums and can't seem to find solution for my problem with my Optimus L90 phone.
I have recently flashed the CM13 on my phone without any errors but below are the issues that I am facing
1. No cellular network signal after inserting SIM card.
2. I read in a different forum that this could happen due to using a wrong version of TWRP, so installed a newer version 2.8.7.0 but things worse.
3. Now I am not able to boot into recovery mode and phone just stays idle with the LG logo screen and few commands appearing like fastboot_iniy() and udc_start().
4. I have tried hard reset and soft reset and both are not successful.
5. I cannot root my phone either. Tried all ways like towelroot, purpledrake, lg root by avicoh etc but in vain
Now my phone, even though has a latest CM version I cannot use it for anything else.
Any help is greatly appreciated.
No SIM is hardly related to TWRP, probably you needed a different bootstack (there is a thread about it).
On CM you don't need anything to root, it's already rooted just not visible to common users, you need to activate Developer Options (it's also explained elsewhere)
Finally, if you cannot reach recovery but still can boot CM13 simply use adb, Flashfy or Hashr to flash another version or TWRP. 2.8.7 is kinda old and not recommended for Marshmallow, you can try 3.0.2 by SlimShady or DarkBlue version from shoxxy's thread.
Thanks for the reply, let me try options you have specified and get back if I am still facing issues
hvramanan said:
Thanks for the reply, let me try options you have specified and get back if I am still facing issues
Click to expand...
Click to collapse
I was able to unblock my phone finally and loaded the stock ROM but the phone is still isn't recognizing cellular network . I am on T-MOBILE. I have tried to insert different SIM, turned off wifi calling but still the phone is not catching any cellular network.
[lfom]: you indicated earlier that a different bootstack might be needed. I am not that knowledgeable about bootstack so can you help me through this or point me to different thread where users might have a similar issue.
Sorry, I meant to say unbrick above
Everything one needs or wants to know about bootstack is here:
http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632
lfom said:
Everything one needs or wants to know about bootstack is here:
http://forum.xda-developers.com/lg-l90/development/bootstack-kk-l-l90-t3118632
Click to expand...
Click to collapse
Hi,
I followed the steps mention in the above thread to change the bootstack and was able to complete it without any issues, however the problem still persists and my phone is not recognizing the SIM and does not catch the cellular network.
Previously I used to use this phone with my t-mobile number and after I took a new phone haven't been using it for sometime. I want to sell this phone and was trying to ensure that it works fine and thats when I saw that the phone is not catching any cellular networks.
Please help. Let me know if you need any other details to better diagonize the problem.
hvramanan said:
Hi,
I followed the steps mention in the above thread to change the bootstack and was able to complete it without any issues, however the problem still persists and my phone is not recognizing the SIM and does not catch the cellular network.
Previously I used to use this phone with my t-mobile number and after I took a new phone haven't been using it for sometime. I want to sell this phone and was trying to ensure that it works fine and thats when I saw that the phone is not catching any cellular networks.
Please help. Let me know if you need any other details to better diagonize the problem.
Click to expand...
Click to collapse
You didn't say what model you have, maybe you flashed the wrong bootstack for your model (hardware version)? Be very careful, you can hart brick your device, and if it's a D415 it's very hard to unbrick. I'd suggest that first you make sure what model you have by removing the battery and looking in the label below, it says what model you have. Then, use LG Flash Tool to flash stock ROM (KDZ) to latest KitKat, then flash Lollipop or use OTA to update to latest version. The only requirements are that you make sure what model you have and flash the corresponding version, and the phone is still able to enter download mode.
lfom said:
You didn't say what model you have, maybe you flashed the wrong bootstack for your model (hardware version)? Be very careful, you can hart brick your device, and if it's a D415 it's very hard to unbrick. I'd suggest that first you make sure what model you have by removing the battery and looking in the label below, it says what model you have. Then, use LG Flash Tool to flash stock ROM (KDZ) to latest KitKat, then flash Lollipop or use OTA to update to latest version. The only requirements are that you make sure what model you have and flash the corresponding version, and the phone is still able to enter download mode.
Click to expand...
Click to collapse
[lfom]: thank you for responding. My phone model is LG-D415 . Actually my phone was bricked but I was able to get into download mode and then I used the L90 Hardbrick tool to flash stock ROM (KDZ) to latest kitkat like you have specified above. Then with the OTA update I was able update it to latest lollipop. Then I followed this forum below to to change the bootstack to KK 10C version as the issue specified in the below thread was similar to mine.
http://forum.xda-developers.com/lg-l90/development/rom-cyanogenmod-12-lg-l90-t3049512/page235
Image of the label inside my phone attached.
Do you think I should have used the LG flash tool to flash stock ROM. Should I repeat the steps with the LG flash tool ?
Thank you again for helping me on this.
Do you see your IMEI in the about phone page? Does it match the one in the label? Maybe when you bricked you've lost the phone's IMEI, and you can't get it back just flashing ROM...
lfom said:
Do you see your IMEI in the about phone page? Does it match the one in the label? Maybe when you bricked you've lost the phone's IMEI, and you can't get it back just flashing ROM...
Click to expand...
Click to collapse
Yes I checked and it matches. There two fields IMEI which has the number and then there is another field which says IMEI SV and it has a value of 02 in it.
Related
Hello,
I have searched multiple forums for hours today and have figured out what is going on with my HTC Vivid. (It has been upgraded to AT&T Official ICS.)
It was working fine up until yesterday where it was not receiving a signal from the mobile network and the signal icon has an X through it. The SIM card is properly inserted and another SIM card has been tried as well. Looking through other threads it seems like the Radio RIL files may be missing or corrupt. The IMEI number and *#06# code does not show an IMEI number either. The baseband version says unknown. I am not sure what happened as I have never loaded any other ROM on it.
I downloaded the Official RUU ICS upgrade ROM today and tried reflashing it, with no luck.
What is interesting (and the other person who had the radio problem) is that when I left the phone sit off overnight and then turned it on in the morning, the phone connected to the mobile network and I had a signal. When I restarted the phone, hours later, the phone lost connection to the mobile network and that is when I started digging and found the problem with the baseband version being unknown.
Is there anything anyone can suggest? Can I reflash the baseband files or copy them from someone somehow using ADB? It seems like there is where my problem lays. I've searched for ways on how to downgrade from ICS to the official GB stock rom, but it doesn't seem like it can be accomplished.
(I tried downloading the Holiday Cingular version of the GB stock rom but the update failed. I read about the ICS HBOOT version being different and not allowing it.)
Thank you in advance for helping and any suggestions.
Have you gotten a new sim card yet? That needs to be your first step. My captivate did the same thing and turned out the sim went bad
Sent from my HTC PH39100 using Tapatalk 2
Cor-master said:
Have you gotten a new sim card yet? That needs to be your first step. My captivate did the same thing and turned out the sim went bad
Sent from my HTC PH39100 using Tapatalk 2
Click to expand...
Click to collapse
Yes I have tried a different sim card. I don't believe thats the issue though being that it worked with the same sim after I let the phone sit overnight. From reading about others experience, it doesn't seem that the sim is the issue but more the baseband version and imei information missing.
centro7710 said:
Hello,
I have searched multiple forums for hours today and have figured out what is going on with my HTC Vivid. (It has been upgraded to AT&T Official ICS.)
It was working fine up until yesterday where it was not receiving a signal from the mobile network and the signal icon has an X through it. The SIM card is properly inserted and another SIM card has been tried as well. Looking through other threads it seems like the Radio RIL files may be missing or corrupt. The IMEI number and *#06# code does not show an IMEI number either. The baseband version says unknown. I am not sure what happened as I have never loaded any other ROM on it.
I downloaded the Official RUU ICS upgrade ROM today and tried reflashing it, with no luck.
What is interesting (and the other person who had the radio problem) is that when I left the phone sit off overnight and then turned it on in the morning, the phone connected to the mobile network and I had a signal. When I restarted the phone, hours later, the phone lost connection to the mobile network and that is when I started digging and found the problem with the baseband version being unknown.
Is there anything anyone can suggest? Can I reflash the baseband files or copy them from someone somehow using ADB? It seems like there is where my problem lays. I've searched for ways on how to downgrade from ICS to the official GB stock rom, but it doesn't seem like it can be accomplished.
(I tried downloading the Holiday Cingular version of the GB stock rom but the update failed. I read about the ICS HBOOT version being different and not allowing it.)
Thank you in advance for helping and any suggestions.
Click to expand...
Click to collapse
I had a similar problem and thought I solved it, but I later realised all my "solutions" didn't bring back the network but coincided with its reappearing cos no same "solution" worked more than once.
It's a very weird problem as the network shows up once in a while and when I'm using Mobile Network for Data, my phone hangs again and the IMEI, Network, baseband disappears on reboot...till further notice. I gave up trying and concluded it's either a bad modem (hardware) or something AT&T knows about!
You can get HBOOTS for both GB and ICS via Hasoons AIO kit
Flash the HBOOT, Flash the Image from Cingular GB RUU and I wish you luck!!!
ayulatins said:
I had a similar problem and thought I solved it, but I later realised all my "solutions" didn't bring back the network but coincided with its reappearing cos no same "solution" worked more than once.
It's a very weird problem as the network shows up once in a while and when I'm using Mobile Network for Data, my phone hangs again and the IMEI, Network, baseband disappears on reboot...till further notice. I gave up trying and concluded it's either a bad modem (hardware) or something AT&T knows about!
You can get HBOOTS for both GB and ICS via Hasoons AIO kit
Flash the HBOOT, Flash the Image from Cingular GB RUU and I wish you luck!!!
Click to expand...
Click to collapse
I found the download link, but the website says they're updating their drives, so who knows how much longer that will take.
Also, are you saying I should just use the tools within the kit to flash the HBOOT back to the previous version compatible with GB and then flash the RUU GB image after? Can I do that with the phone connected via USB or does it have to be flashed from the SD card? If it has to be flashed from the SD card, how do I go about doing that? If it can be done from the phone via USB, does the phone have to be in recovery mode?
I have tried reflashing the ICS RUU multiple times w/ version 3.26.502.52 and 3.26.502.56, both do not fix the issue. Do the baseband and or radio files NOT get flashed within these updates?
Thanks for the response!
centro7710 said:
I tried finding a download link for the AIO kit on the link provided, but I must be blind?
Also, are you saying I should just use the tools within the kit to flash the HBOOT back to the previous version compatible with GB and then flash the RUU GB image after? Can I do that with the phone connected via USB or does it have to be flashed from the SD card? If it has to be flashed from the SD card, how do I go about doing that? If it can be done from the phone via USB, does the phone have to be in recovery mode?
I have tried reflashing the ICS RUU multiple times w/ version 3.26.502.52 and 3.26.502.56, both do not fix the issue. Do the baseband and or radio files NOT get flashed within these updates?
Thanks for the response!
Click to expand...
Click to collapse
For any issues downloading Hasoon AIO tool, please use his thread (earlier provided).
Yes, use the AIO tool to flash GB HBOOT or read the SUPERGUIDE
and obtain rom.zip from the Cingular RUU
I don't know how to flash RUU via Recovery [email protected]@@!!!
I'd advice you follow my first solution here!!!
ayulatins said:
For any issues downloading Hasoon AIO tool, please use his thread (earlier provided).
Yes, use the AIO tool to flash GB HBOOT or read the SUPERGUIDE
and obtain rom.zip from the Cingular RUU
I don't know how to flash RUU via Recovery [email protected]@@!!!
I'd advice you follow my first solution here!!!
Click to expand...
Click to collapse
Thanks for the quick reply.
Your thread was the one I saw earlier with the simliar problem that I am having, only I have not loaded any custom ROMS. The phone just stopped receiving the signal the other day. I am still waiting for the download website to become available to use the tool to perform the flash of HBOOT, however, once I do that, will that erase the ICS rom from my phone? If so, what steps do I have to perform to get it in a "download mode" to accept the AT&T GB RUU? I'm a little confused on that part.
I read your first thread and I am a bit confused on exactly how you were able to correct the baseband/RIL issue (which I am assuming is the root of my issue). Do I have to extract some files from the RUU executable? Are the commands you provided to be used in ADB? I am confused as to what to do with [setprop ro.baseband 3.26.5XXX (<--- mainver: in android-info.txt in RUU.zip)] from your post. If that command is copying a file or just setting information (almost like as a registry setting within Windows) to point to the file or set a version number. Also if the XXX needs to have a certain number.
I thank you for your time and am trying my hardest to understand what to do to accomplish these steps.
centro7710 said:
Thanks for the quick reply.
Your thread was the one I saw earlier with the simliar problem that I am having, only I have not loaded any custom ROMS. The phone just stopped receiving the signal the other day. I am still waiting for the download website to become available to use the tool to perform the flash of HBOOT, however, once I do that, will that erase the ICS rom from my phone? If so, what steps do I have to perform to get it in a "download mode" to accept the AT&T GB RUU? I'm a little confused on that part.
I read your first thread and I am a bit confused on exactly how you were able to correct the baseband/RIL issue (which I am assuming is the root of my issue). Do I have to extract some files from the RUU executable? Are the commands you provided to be used in ADB? I am confused as to what to do with [setprop ro.baseband 3.26.5XXX (<--- mainver: in android-info.txt in RUU.zip)] from your post. If that command is copying a file or just setting information (almost like as a registry setting within Windows) to point to the file or set a version number. Also if the XXX needs to have a certain number.
I thank you for your time and am trying my hardest to understand what to do to accomplish these steps.
Click to expand...
Click to collapse
I did find the extracted files within the RUU executable and found the rom.zip which included the .img files among other files I assume needed as sources to flash the phone. I see a radio.img file would I be able to do anything with that?
Thank you.
centro7710 said:
I did find the extracted files within the RUU executable and found the rom.zip which included the .img files among other files I assume needed as sources to flash the phone. I see a radio.img file would I be able to do anything with that?
Thank you.
Click to expand...
Click to collapse
And I have a question, if the radio/baseband files are included in the RUU flash, what is happening as to why it is not being reflashed, or if it is being reflashed, why it is disabling the mobile network and providing an Unknown version to Baseband and clearing the IMEI number?
ayulatins said:
For any issues downloading Hasoon AIO tool, please use his thread (earlier provided).
Yes, use the AIO tool to flash GB HBOOT or read the SUPERGUIDE
and obtain rom.zip from the Cingular RUU
I don't know how to flash RUU via Recovery [email protected]@@!!!
I'd advice you follow my first solution here!!!
Click to expand...
Click to collapse
Here's where I am:
I successfully unlocked my bootloader, downgraded to GB, rooted. Tried to gain root access through adb terminal but it was not working properly.
I relocked my bootloader. Installed the ICS RUU AT&T ROM update. Unlocked my bootloader, rooted.
I see the commands you ran in your previous post. I am also receiving the same message of N/A when running the getprop ro.baseband
I tried the second command setprop ro.baseband 3.26.5XXX and then restarted the phone. I have tried it as posted, and also with swapping out the version that is located in my android-info.txt file: 3.26.502.56
Still no luck with setting the baseband version. IMEI still is cleared out.
Am I doing something wrong?
ayulatins said:
I had a similar problem and thought I solved it, but I later realised all my "solutions" didn't bring back the network but coincided with its reappearing cos no same "solution" worked more than once.
It's a very weird problem as the network shows up once in a while and when I'm using Mobile Network for Data, my phone hangs again and the IMEI, Network, baseband disappears on reboot...till further notice. I gave up trying and concluded it's either a bad modem (hardware) or something AT&T knows about!
Click to expand...
Click to collapse
Please see my initial quotes above...
All the previous steps I took were only a coincidence (not proven to work)!!!
We may need to contact AT&T to be sure its not a lock IMEI (and I'm wondering why it would be) or an experienced Dev
ayulatins said:
Please see my initial quotes above...
All the previous steps I took were only a coincidence (not proven to work)!!!
We may need to contact AT&T to be sure its not a lock IMEI (and I'm wondering why it would be) or an experienced Dev
Click to expand...
Click to collapse
Hey thanks for all of your suggestions. I contacted AT&T the day everything happened to see if it was on the block list. They said no. I tried multiple things including trying to re-flash the radio, but I was getting a signature failed error that I could not get around. I really think that's what the problem is. I gave up and ended up selling it.
centro7710 said:
Hey thanks for all of your suggestions. I contacted AT&T the day everything happened to see if it was on the block list. They said no. I tried multiple things including trying to re-flash the radio, but I was getting a signature failed error that I could not get around. I really think that's what the problem is. I gave up and ended up selling it, as is, on ebay instead to get a few bucks out of it and getting a new phone.
Click to expand...
Click to collapse
I really wouldn't mind selling mine too if I get a buyer. I'm just tired of all the troubles and no dev is willing to help.
ayulatins said:
I really wouldn't mind selling mine too if I get a buyer. I'm just tired of all the troubles and no dev is willing to help.
Click to expand...
Click to collapse
Exactly. It was my sister's phone. The sh*tty thing is we bought two off of ebay at the same time, 1 for me, 1 for her. Well, her phone was not in the box (either never shipped or stolen) so I had to file a claim through eBay which took 3 weeks to get the money back. Meanwhile, I gave her my phone (which is the phone in reference) to use instead. I bought her an iPhone instead now, along with purchasing one myself. I loved Android, but the bugs and fragmentation is getting too much for me to handle.
Dude, if you don't have an IMEI showing up, something is WAY wrong. That goes beyone the RIL not working... The RIL is probably fine. If your phone doesn't have an IMEI somehow, the cell towers are NOT, NO WAY, NEVER EVER going to register your phone on their network. You can put a billion SIM cards in there, or flash a billion stock ROMS, and if you don't have an IMEI, you will never be able to connect.
Something is probably corrupt or broken in your firmware or the hardware itself. I think your device is probably screwed.
My advice, is follow the steps to put your phone back to stock (including changing the bootloader message back to **LOCKED** and S-ON), and get it back to the phone company. They will be able to tell something is boned on the phone right away since it isn't displaying an IMEI.
Sorry to be the bearer of bad news and for your many wasted hours... But on the plus side, you now know a LOT about flashing and how your phone works now
Good luck with everything man! Hope they get you up and running soon!
I have the same problem as the OP but I have a IMEI showing up and a Basehand But won't connect to AT&T or anything they resent me a Signal & everything it shows a X with no bars it happened after I did a Factory Reset
anyone got the Radio.img?
inick73376 said:
I have the same problem as the OP but I have a IMEI showing up and a Basehand But won't connect to AT&T or anything they resent me a Signal & everything it shows a X with no bars it happened after I did a Factory Reset
Click to expand...
Click to collapse
That's weird..you try creating the apns again? I don't see how a factory reset would do that. Try toggling airplane mode too
Sent from my De-Sensed HTC Vivid using xda premium
I am currently having the same issues right now, it works if i leave the phone off for 1 hr it will work until i reboot then its down again, tried every thing possible, airplane mode will crash, reflashing the radios from gb and ics does nothing, setprop does nothing really. from this point it feels like a hardware issue.
sorry to revive an old thread, i just wanted to know if anyone came across this issue and had it fixed
i will get a log to see if there is errors showing up
Return it.
Sent from my HTC Holiday using Tapatalk 2
Hi
My phone suddenly stopped detecting all sim cards ( I have tried various working sims ).
It is running CM 7.2 and has been running cm 7.2 for a few months with no problems.
Today I took out the sim and put it back in to reboot, all was fine. I went to shower, came back and the sim suddenly stopped being detected.
I have tried to google but it seems most problems are to do with flashing a new rom and having the sim not work, my case is that the rom has been the same for a few months.
I have tried to flash different roms and I still have the same problem. I have a gut feeling it is the hardware that reads the sim that is faulty.
I have read something about a baseband, I dont know what that is but if it helps, when i go to the settings and click on 'about phone'
It says there is a baseband and it is version something. There are no question marks or anything like that.
I appreciate the help and would love some more troubleshooting suggestions.
The worst case scenario is unrooting it, flashing stock rom and send it back to warranty. I actually don't know how to do that so if anyone has a guide lying around please link me on that.
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
asmerito said:
I have similar problem with new boot loader.
Download getril app from play store and see if your baseband is OK. If not, download and flash matching baseband from development thread. You will loose all personal data and your apps after flashing. Then download new ril with getril and reboot. Good luck...
This method was no helpful for me. Maybe you will have better luck.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
cimore000 said:
Thanks for the reply,
When I first opened getril, it said RIL not found, I did not have one. I downloaded one and then it said RIL does not match. I then redid it on another firmware and it now says RIL and Baseband matches. Is this enough? The only weird thing is the baseband has canada and europe in it. I am from Australia. How do i tell which baseband/ril I need?
Click to expand...
Click to collapse
First you flash BB, then download RIL with GetRil. Read completely through BB sticky topic in development section. All answers are there.
http://forum.xda-developers.com/showthread.php?t=1658047
[Baseband][P990] Complete Baseband overview thread
Sent from my LG-P990 using xda app-developers app
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I checked the IMEI and it matches.
I have some extra information if it helps, when I choose a random RIL from getril, the battery might become a ? mark and the sim card not detected error doesnt show anymore, however when I put it back to the original RIL, my battery bar starts showing the 'power left' and also the sim not detecting error shows again.
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
I get the SIM Toolkit Incompatible Handset error and then whether I press OK or Cancel, shortly after I lose mobile network access. I've been trying all manner of different things, Smart Flashing, NVflashing, changing basebands, Rils, you name it.
I'm currently on the V30B root ROM http://forum.xda-developers.com/showthread.php?t=2064793 and the Ril matches the baseband from that ROM, but that hasn't helped either. So I went and check the in phone and behind battery IMEI and they are different! I'd love to hear what your solution to this is!
Custom40 said:
You can flash as much as you want, none of that will help. Had same issue once, flashed almost everything there was through SmartFlash, NVflash and all of that. This is what you need to do:
First, remove the battery from your phone. Write down the IMEI. Now boot up your phone, write *#06# and see if the IMEI that pops up is the same as the one you saw behind the battery. If not, let us know and I'll hand you the solution, but first check if the IMEI matches.
Click to expand...
Click to collapse
My problem was no service and IMEI unknown... Never managed to solve it. Reverted to old bootloader and problem solved.
Sent from my LG-P990 using xda app-developers app
IMEI Solution
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
4) Install a program called Hyperterminal on your PC and open it. In COM settings select same port as in device manager -> LGE Mobile USB Seial Port (should be 115200)
5) Type at%imei and it should respond by saying OK
6) Now type at%imei and it should now display your current IMEI number.
7) Type at%imei=XXXXXXXXXXXXXXX where X is your original IMEI number.
8) Reset phone.
You might have to reboot your phone after step 3. But see if it works without.
I have been thinking that this is a hardware issue, I have not changed a single setting/rom/baseband at all, the sim just wasnt detecting when I came back to my phone. The rom and settings were the same for a number of months.
I am now going to give it in to warranty, however it only has 1 month left. I have tried to install the stock firmware but with no luck..
I found a rom to flash for my region, it is a zip file but when I try flash it with Clockworkmod, it says installation aborted....
Shouldnt I be able to flash the roms with CWM? The file is a zip file just like the CM7.2 rom I flashed. Do I need nvflash instead? I found the rom here :
http://forum.xda-developers.com/showthread.php?t=1852112 (the download links were removed so I googled the exact same rom)
I was also told that if I just use the LG update tool, it sohuld automatically update the phone to stock firmware AND unroot it, only that the update tool gives me an error. Whats the best approach guys?? I need to get this fixed before my warranty goes.
Custom40 said:
If IMEI does NOT match, you will need to do this:
Check if you can get in a menu by typing 1809#*990#. If you can't, you will need to use a GB ROM (I remember I used Homero's GB NVFlash as I was on ICS bootloader and couldn't get access to it on ICS). Follow these steps if you are sure you can get into the menu...
Click to expand...
Click to collapse
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
[-Stash-] said:
Bother. The 1890 etc didn't work on the p990 in android 4.0.4 (nor on my Nexus 4 incidentally), so I guess I'll have to flash down to GB. I'll let you know if I can get it to work, thanks!
Click to expand...
Click to collapse
Trust me, you can try whatever you want. This is the only way to get it working. I spent hours and hours to figure this out, so I guarantee you it will work.
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
interr said:
please,please can u explain better, my imei and baseband is not showing in setings in my phone., i wanted to downgrade into gingerbread stock rom with smart flash, when this happend to me and my sim card its not recognized,. so please explain better with video or pictures steb by step how to apear the sim card, thankyou
Click to expand...
Click to collapse
Your imei should not show in settings, it should show in the back of your battery and when you dial : *#06# into the phone (where you dial numbers for calls).
Cant help you with baseband.
OP here, I am trying to unroot my phone and put stock firmware to get warranty to fix the simcard reader ( i believe it is a hardware issue ).
If I use nvflash and flash any stock firmware I can find on the internet, will that be OK? I have a feeling each region of optimus 2x has slight differences in firmware, eg swedish stock roms and australian stock roms may differ in the default applications etc.
Will it be ok to just install any kind of stock rom for my warranty? Help would be appreciated my warranty is running out in less than a month now.
I also tried to flash stock firmware with CMW, it didnt work. I am about to try NVflash, so I went into greater detail in page 1 but no one replied yet. If you guys know please help. I am more familiar with CMW than NVflash. I have not used NVflash yet.
hahah after 2 sleeples nights i menage to restore my sim to be recognize ,whit this metod,.. NFlash rulles ))
http://www.ibtimes.co.uk/articles/408044/20121124/unbrick-tool-lg-optimus-p990.htm
http://androidadvices.com/unbrick-lg-optimus-2x-p990-android-phone-tutorial/
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
http://progmaq.es/cm10/progmaq-default-cm-10-20121105.7z
this is also the best metod for unbricking your phone, .
INSTALLATION:
ATTENTION
The flasher with NVFlash clears all memory, including the Internal SD., so make a backup if u can..
Download this file: http://bayfiles.com/file/yKZL/eGZ31A/driver.rar The pack includes the APX driver (folder driver)
http://www.putlocker.com/file/4CEDEB7E0893B6F1
1.- Remove the battery to the phone.
2.- Press and hold Vol- and Vol+ and without releasing the 2 keys connect the USB cable to the PC
3.- Go to the progmaq-default-cm-10-20121105 folder and run flash icon... folow instruction., wait wait wait Enjoy!
Custom40 said:
1) Connect your phone by USB.
2) Enter 1809#*990# in dialer.
3) Select Port Setting -> Select CP USB
Click to expand...
Click to collapse
I managed to get an old CM7 install back on the p990,but the above is still not working for me :/
After I finish typing in 1809#*990# in dialer, nothing happens. If I press the green phone handset icon to dial that number it comes up with an error message of "Mobile network not available".
Any further advice? Thanks.
Okay, I failed at reading comprehension – it has to be an LG Gingerbread ROM for this code to work, NOT a CM-based one!
Trying one from somewhere-I-cannot-link-to-yet
Success! Once I was back on the original stock LG Gingerbread ROM, I could reset the IMEI and make/receive calls again using this method. Thank you very much!
Now all flashed back onto a nice "working" nightly CM10.1 and a very happy little device.
Many thanks all.
Hi,
Anyone have a working link to "progmaq-default-cm-10-20121105 ". My Optimus 2x has been bricked as well, and can't find any other version of this on Google unfortunately
Appreciate all help.
Hello All,
Tried searching for a case peculiar as mine, wasnt able to find one so here is the lowdown.
1. Xperia C6603 , originally had 4.2.2 stock ROM which was working fine with my local network. Dont remember the baseband version.
2. Used XperiFirm to download the latest firmware as reported in the list. Dont know what does the suffix RxD (R1D--R8D) means. Anyone please explain. As per the below screenshot downloaded version "C6603_Customized HK_1270-5695_10.5.1.A.0.292_R1D" .
3. Before flashing the downloaded firmware I flashed the dualrecovery from XZDualRecovery. I made a TWRP backup of the 4.2.2 stock ROM on an external SD card, for all partitions including TA,system,boot etc.
4. Used Flashtool to convert the downloaded (step 2) firmware "FILES" format to a flashable FTF file. Flashed the firmware , which went on smoothly.
5. At the first startup I got the following screen , telling me that it is a prototype device/firmware . I went on to see that the network which was working fine with stock ROM 4.2.2 was no longer available.
I tried to go to settings to check and search for networks, which shows available networks, but unable to get itself registered to the SIM providers network. Tried all the settings combinations in menu "*#*#4636*#*#" , nothing makes it work to get the GSM network connectivity back. It is supposedly on the correct setting of LTE/WCDMA/GSM which my current operator supports. Following is the "About" screen for current baseband version.
Tried going in the "Service" menu via "*#*#7378423#*#*" , with the following info, having an unknown modem configuration.
6. Tried reverting back to the old TWRP backup, for which I needed the TWRP recovery loaded on the phone. So ran the XZDualRecovery script again (with the new 4.4 ROM on the phone), however the script hangs around in the end and never reboots the phone with the TWRP recovery. So i am unable to revert and use the stock ROM backups .
7. I dont want to root/unlock the bootloader, however I tried installing TWRP via its "XZrecovery.apk", but it requires busybox (which requires a rooted phone). So i tried the rooting script from [GUIDE] How to root 10.5.1.A.0.283 / 10.5.1.A.0.292 [Locked Bootloader], but it also hangs around in the end and never delivers a rooted phone.
8. Tried looking around for assortment of xperia Z baseband files to check and see if flashing it separately can make it work, however to no avail the the condition persists.
Either ways having a prototype version on the phone which transmits all data back to sony is not desirable at all. So need to replace it for sure. Currently I am stuck in the middle without a clue of how to go back and restore the 4.2.2 TWRP backup, or to actually flash a "non-prototype" or retail version of 4.4.x .
Any help/guidance/suggestions to remedy would be appreciated.
Thanks.
=====================UPDATE
Ok followed the instructions at [GUIDE] How to root 10.5.1.A.0.283 / 10.5.1.A.0.292 [Locked Bootloader] , read carefully again to flash the .230 kernel. Flashed the XZDualRecovery and got the TWRP recovery back.
Restored the old 4.2.2 TWRP backup , hoping that everything would go back to normal. However with a successul restore and a reboot, I was amazed to see I still have no network connectivity. The baseband version is "9x15A-ACEFWMAZQ-30110068-44" . Another noticeable thing was that after the restore and first boot, I still got the "prototype device" message again, which was not there when I first booted the device with original stock 4.2.2 ROM before this flashing adventure began.
Any ideas what may have gone bad.
Thanks.
=======================================
Just got to know that my device is a BROWN device, its IMEI number starts from 0044 so it is a prototype. Any ideas is it really good or bad to have one. Also I see that after another restore of the original stock 4.2.2 ROM it is barely getting the signals indoor (1 bar only). The signal reception is very weak and sporadic . Should i keep the device or not and is there any remedy or network signal strength.
Thanks.
HyperEscape said:
Hello All,
Tried searching for a case peculiar as mine, wasnt able to find one so here is the lowdown.
1. Xperia C6603 , originally had 4.2.2 stock ROM which was working fine with my local network. Dont remember the baseband version.
2. Used XperiFirm to download the latest firmware as reported in the list. Dont know what does the suffix RxD (R1D--R8D) means. Anyone please explain. As per the below screenshot downloaded version "C6603_Customized HK_1270-5695_10.5.1.A.0.292_R1D" .
3. Before flashing the downloaded firmware I flashed the dualrecovery from XZDualRecovery. I made a TWRP backup of the 4.2.2 stock ROM on an external SD card, for all partitions including TA,system,boot etc.
4. Used Flashtool to convert the downloaded (step 2) firmware "FILES" format to a flashable FTF file. Flashed the firmware , which went on smoothly.
5. At the first startup I got the following screen , telling me that it is a prototype device/firmware . I went on to see that the network which was working fine with stock ROM 4.2.2 was no longer available.
I tried to go to settings to check and search for networks, which shows available networks, but unable to get itself registered to the SIM providers network. Tried all the settings combinations in menu "*#*#4636*#*#" , nothing makes it work to get the GSM network connectivity back. It is supposedly on the correct setting of LTE/WCDMA/GSM which my current operator supports. Following is the "About" screen for current baseband version.
Tried going in the "Service" menu via "*#*#7378423#*#*" , with the following info, having an unknown modem configuration.
6. Tried reverting back to the old TWRP backup, for which I needed the TWRP recovery loaded on the phone. So ran the XZDualRecovery script again (with the new 4.4 ROM on the phone), however the script hangs around in the end and never reboots the phone with the TWRP recovery. So i am unable to revert and use the stock ROM backups .
7. I dont want to root/unlock the bootloader, however I tried installing TWRP via its "XZrecovery.apk", but it requires busybox (which requires a rooted phone). So i tried the rooting script from [GUIDE] How to root 10.5.1.A.0.283 / 10.5.1.A.0.292 [Locked Bootloader], but it also hangs around in the end and never delivers a rooted phone.
8. Tried looking around for assortment of xperia Z baseband files to check and see if flashing it separately can make it work, however to no avail the the condition persists.
Either ways having a prototype version on the phone which transmits all data back to sony is not desirable at all. So need to replace it for sure. Currently I am stuck in the middle without a clue of how to go back and restore the 4.2.2 TWRP backup, or to actually flash a "non-prototype" or retail version of 4.4.x .
Any help/guidance/suggestions to remedy would be appreciated.
Thanks.
=====================UPDATE
Ok followed the instructions at [GUIDE] How to root 10.5.1.A.0.283 / 10.5.1.A.0.292 [Locked Bootloader] , read carefully again to flash the .230 kernel. Flashed the XZDualRecovery and got the TWRP recovery back.
Restored the old 4.2.2 TWRP backup , hoping that everything would go back to normal. However with a successul restore and a reboot, I was amazed to see I still have no network connectivity. The baseband version is "9x15A-ACEFWMAZQ-30110068-44" . Another noticeable thing was that after the restore and first boot, I still got the "prototype device" message again, which was not there when I first booted the device with original stock 4.2.2 ROM before this flashing adventure began.
Any ideas what may have gone bad.
Thanks.
=======================================
Just got to know that my device is a BROWN device, its IMEI number starts from 0044 so it is a prototype. Any ideas is it really good or bad to have one. Also I see that after another restore of the original stock 4.2.2 ROM it is barely getting the signals indoor (1 bar only). The signal reception is very weak and sporadic . Should i keep the device or not and is there any remedy or network signal strength.
Thanks.
Click to expand...
Click to collapse
Firstly I love the detail you have provided which would save you and me a lot of time to pinpoint the exact problem and work it accordingly.
Firstly, I would suggest that if you have a box or any other receipt that shows your exact device name with its basebands. Where did you buy it from and what is your exact location so we can guess your region. This is the time to show it now. Also which basebands work in your location can also help us out.
The problem you have made it flashed basebands of a different variant which has resulted in loss of network. So to fix it we need, and there are three ways about it.
First, download Sony PC companion and try to repair your phone and see if that helps.
Secondly, download flashtool and ftf for your device (make sure you select the right variant this time. Choosing for wrong device can hard brick your phone. so beware) and flash your phone with it.
If all this fails, you go to Sony flashtool called Emma. Download it and try to flash it with that.
You can google how to use every tool on xda and I am sure you would find a lot of guides for that.
Quote me back in case you expect an answer
Hey guys, so recently I decided to unlock the bootloader of my Moto G (XT1064), and flash a custom ROM.
I unlocked the bootloader, all good. Here's where the problem kicks in.
When I flashed the new ROM, I forgot to create a backup of my Stock. So essentially, I have no way of returning the phone to what it used to be.
Now, I'm on Paranoid Android, and my phone is getting absolutely no service. I try ADB and Fastboot, and both say that no devices are found.
I'm also on Wind Mobile. I tried using some tool I found online to revert me back to stock 4.4.4, and it worked, but I still had no signal.
I noticed something between the two times I had no signal. I hold my power button, and it says airplane mode is on. However, I am still able to connect to wifi.
When I press the Airplane Mode button, the button greys out and I can't click it anymore, and I still dont have signal.
I tried *#*#4636#*#*, and I'm unable to turn on my radio from there. I set it to GSM Auto, and it doesnt stay when I reboot.
Please reply fast, I really need to be able to use my phone. Thanks.
Are you downgrading?
I think that could be the issue
Try this: http://forum.xda-developers.com/moto-g-2014/general/restore-to-stock-t2873657
OmarQureshi said:
Hey guys, so recently I decided to unlock the bootloader of my Moto G (XT1064), and flash a custom ROM.
I unlocked the bootloader, all good. Here's where the problem kicks in.
When I flashed the new ROM, I forgot to create a backup of my Stock. So essentially, I have no way of returning the phone to what it used to be.
Now, I'm on Paranoid Android, and my phone is getting absolutely no service. I try ADB and Fastboot, and both say that no devices are found.
I'm also on Wind Mobile. I tried using some tool I found online to revert me back to stock 4.4.4, and it worked, but I still had no signal.
I noticed something between the two times I had no signal. I hold my power button, and it says airplane mode is on. However, I am still able to connect to wifi.
When I press the Airplane Mode button, the button greys out and I can't click it anymore, and I still dont have signal.
I tried *#*#4636#*#*, and I'm unable to turn on my radio from there. I set it to GSM Auto, and it doesnt stay when I reboot.
Please reply fast, I really need to be able to use my phone. Thanks.
Click to expand...
Click to collapse
Candian or US xt1064? give me this info and I will find correct OEM stock rom for you.
there's (i think) 3 versions or xt1064 stock rom RETCA , RETUAWS & NIIMX (candian, usa, mexico) all use a different modem files
to solve phone not found in ADB use these drivers setup programs Required Motorola drivers and ADB set up download / unzip and run the 2 programs for correct drivers /usb / adb /fastboot
reefuge said:
Candian or US xt1064? give me this info and I will find correct OEM stock rom for you.
there's (i think) 3 versions or xt1064 stock rom RETCA , RETUAWS & NIIMX (candian, usa, mexico) all use a different modem files
to solve phone not found in ADB use these drivers setup programs ]Required Motorola drivers and ADB set up download / unzip and run the 2 programs for correct drivers /usb / adb /fastboot
Click to expand...
Click to collapse
I found a Reddit post that brought back my service. I used the RETCA version as I'm in Canada. It brought my phone service back, but sadly enough I can't upgrade back up to Android 5.0.2. I'm stuck on 4.4.4.
OmarQureshi said:
I found a Reddit post that brought back my service. I used the RETCA version as I'm in Canada. It brought my phone service back, but sadly enough I can't upgrade back up to Android 5.0.2. I'm stuck on 4.4.4.
Click to expand...
Click to collapse
Stock retail canada 5.0.2 lollipop - flash via Easy Installer below its not for TWRP or OTA update methods of updating... this is stock OEM motorola so you will get future OTA updates and (should) be able to flash straight up from 4.4.4 using this Easy Installer for Lollipop (no firmware included) - read instructions inside..
reefuge said:
Candian or US xt1064? give me this info and I will find correct OEM stock rom for you.
there's (i think) 3 versions or xt1064 stock rom RETCA , RETUAWS & NIIMX (candian, usa, mexico) all use a different modem files
to solve phone not found in ADB use these drivers setup programs Required Motorola drivers and ADB set up download / unzip and run the 2 programs for correct drivers /usb / adb /fastboot
Click to expand...
Click to collapse
If you can find the stock KitKat for the US version, I would be infernally grateful...
tronmech said:
If you can find the stock KitKat for the US version, I would be infernally grateful...
Click to expand...
Click to collapse
this is 4.4.4 RETUAWS for xt1064 you will need to flash via fastboot commands manually
Hello everyone, I am new to all of this development stuff for Android devices and I know I screwed something up big time.
I had an update recently on my Moto G6 XT1925-6 phone to Pie and there were several bugs happening from calls dropping, data and service dropping erratically, youtube videos would skip forward several times or not download at all. I found the post on here to downgrade from Pie to Oreo Stock ROM and followed it exactly as I could. Everything went according to the guide, but now after rebooting the phone and going through the setup, the phone wont detect my SIM, and there is no service. Under the IMEI Information, everything is 'Unknown' and under SIM status everything says 'Not Available'. Also, under Mobile Network, Data Roaming, Preferred network type, and System select is greyed out. CDMA subscription is the only thing available to tap. The issue with that is, this phone is originally GSM.
Please, I am not knowledgeable in messing with Android systems and I know I shouldn't be messing with something I know nothing about. I do have ADB Minimum installed on my PC, the phone is unlocked bootloader but is currently not rooted after the stock ROM was flashed.
Stock ROM: ALI_RETAIL_8.0.0_OPSS27.104-92-4-5-1_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
One more thing to add, I did the fastboot IMEI check command and it came back with one IMEI so it is still present in the phone somewhere.
Any help would be greatly appreciated! Thanks in advance!
Angelo Della Morte said:
Hello everyone, I am new to all of this development stuff for Android devices and I know I screwed something up big time.
I had an update recently on my Moto G6 XT1925-6 phone to Pie and there were several bugs happening from calls dropping, data and service dropping erratically, youtube videos would skip forward several times or not download at all. I found the post on here to downgrade from Pie to Oreo Stock ROM and followed it exactly as I could. Everything went according to the guide, but now after rebooting the phone and going through the setup, the phone wont detect my SIM, and there is no service. Under the IMEI Information, everything is 'Unknown' and under SIM status everything says 'Not Available'. Also, under Mobile Network, Data Roaming, Preferred network type, and System select is greyed out. CDMA subscription is the only thing available to tap. The issue with that is, this phone is originally GSM.
Please, I am not knowledgeable in messing with Android systems and I know I shouldn't be messing with something I know nothing about. I do have ADB Minimum installed on my PC, the phone is unlocked bootloader but is currently not rooted after the stock ROM was flashed.
Stock ROM: ALI_RETAIL_8.0.0_OPSS27.104-92-4-5-1_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
One more thing to add, I did the fastboot IMEI check command and it came back with one IMEI so it is still present in the phone somewhere.
Any help would be greatly appreciated! Thanks in advance!
Click to expand...
Click to collapse
What version of Pie did you upgrade to and when you downgraded did you flash the bootloader and gpt.bin files? Can you link the post that you followed?
kc6wke said:
What version of Pie did you upgrade to and when you downgraded did you flash the bootloader and gpt.bin files? Can you link the post that you followed?
Click to expand...
Click to collapse
First, thank you for your reply and help in this matter!
After the update from the phone itself, it said it was Android Pie v9.0.0. I don't know anything further than that on which version of Pie if there are several.
When I attempted to flash the bootloader and the gpt.bin during the steps on the forum guide, adb gave me the 'couldn't open' and the 'Failed' result for those two things. Reading one of the replies to this guide, someone stated that they didn't flash either of those and it worked perfectly.
Here is the guide: https://forum.xda-developers.com/moto-g6/how-to/guide-faster-updated-guide-to-root-t3914228
Angelo Della Morte said:
First, thank you for your reply and help in this matter!
After the update from the phone itself, it said it was Android Pie v9.0.0. I don't know anything further than that on which version of Pie if there are several.
When I attempted to flash the bootloader and the gpt.bin during the steps on the forum guide, adb gave me the 'couldn't open' and the 'Failed' result for those two things. Reading one of the replies to this guide, someone stated that they didn't flash either of those and it worked perfectly.
Here is the guide: https://forum.xda-developers.com/moto-g6/how-to/guide-faster-updated-guide-to-root-t3914228
Click to expand...
Click to collapse
I have successfully downgraded from Pie PPSS29.55-24-2 to Oreo without flashing those files but today when I flashed the newest Pie PPS29.118-11-1, I got these results.
Only solution was to reflash the latest Pie. If you took the OTA update as it appears you did you are most likely in the same boat I'm in stuck on the latest Pie.
kc6wke said:
I have successfully downgraded from Pie PPSS29.55-24-2 to Oreo without flashing those files but today when I flashed the newest Pie PPS29.118-11-1, I got these results.
Only solution was to reflash the latest Pie. If you took the OTA update as it appears you did you are most likely in the same boat I'm in stuck on the latest Pie.
Click to expand...
Click to collapse
Okay, thank you for the information. Unfortunately I will have to reupdate to P.O.S. Pie. Could you point me to the correct version of Pie that will work? It was the OTA update to PIE that I did so if you could let me know which one you labeled would work, then I can get started. Maybe point me to a guide if you know of one to do it properly.
Thanks a million!
Angelo Della Morte said:
Okay, thank you for the information. Unfortunately I will have to reupdate to P.O.S. Pie. Could you point me to the correct version of Pie that will work? It was the OTA update to PIE that I did so if you could let me know which one you labeled would work, then I can get started. Maybe point me to a guide if you know of one to do it properly.
Thanks a million!
Click to expand...
Click to collapse
I can't tell you exactly which firmware to download, but It looks like you are using the Retail version by your post mentioning "Stock ROM: ALI_RETAIL_8.0.0_OPSS27.104-92-4-5-1_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml". If so I would flash this one.
As for a guide some people use RSD lite but I prefer this method.
download the attachment and extract it
extract the firmware to the folder Place_Extracted_Firmware_Here.
double click 2-rsd-flash-flashfile-windows.bat, this will create a file called flashfile.bat (It will Wipe your data).
boot your phone to bootloader, connect it to pc.
double click the flashfile.bat and let it run
reboot
hope this helps
View attachment RSD_Lite_Motorola_XML_To_Batch_Script.zip
351849091444336